The direct-write pipe code has a bug in it somewhere when the system is
[dragonfly.git] / sys / dev /
2008-05-02 Sepherosa ZiehauIntroduce ETHER_INPUT_CHAIN option:
2008-05-01 Sepherosa Ziehau- Promote em(4) polling begin/end ktr into polling(4)
2008-04-30 Matthew DillonAdd pmap_unmapdev() calls to detach functions for drive...
2008-04-30 Matthew DillonThe driver was improperly using kmem_free() instead...
2008-04-27 Sepherosa ZiehauAdd basic support for 8111C; hardware checksum offload...
2008-04-27 Sepherosa ZiehauPrint unknown hardware version.
2008-04-26 Sepherosa Ziehauwi(4) depends on wlan(4)
2008-04-23 Hasso TepperAdd a driver for Omnikey CardMan 4040 smartcard reader...
2008-04-22 Matthew DillonFix some IO sequencing performance issues and reformula...
2008-04-20 Sascha WildnerAnother round of typo fixes (mostly in messages).
2008-04-06 Peter AvalosLK_EXCLUSIVE has no business being in lockinit.
2008-04-06 Peter AvalosMerge from vendor branch OPENSSH:
2008-04-05 Matthew DillonFix a snafu with the last commit. Not all of the new...
2008-04-05 Hasso TepperDRM update to git snapshot from 2008-01-04.
2008-04-03 Sepherosa ZiehauAdd counters for serializer enter/try
2008-04-02 Sepherosa Ziehau- Add two fields in lwkt_serialize to profile serialize...
2008-04-02 Sepherosa ZiehauUse sysctl_ctx in softc
2008-03-28 Sepherosa ZiehauPull back part of rev1.7
2008-03-24 Matthew DillonSynchronize various changes from FreeBSD. This is...
2008-03-23 Sepherosa ZiehauNuke debug prints.
2008-03-23 Sepherosa ZiehauAdd Broadcom 4402 in bfe(4)
2008-03-22 Sepherosa ZiehauGC ipw(4)
2008-03-22 Sepherosa ZiehauRemove ipw(4) from LINT building and module building
2008-03-22 Sepherosa Ziehau- Set number of TX descriptors to 512.
2008-03-20 Matthew DillonImprove vkernel support.
2008-03-20 Peter AvalosMerge from vendor branch BZIP:
2008-03-18 Hasso TepperSync Bluetooth stack with NetBSD.
2008-03-16 Hasso TepperRegenerate miidevs.h.
2008-03-16 Hasso Tepper10Base-TX -> 10Base-T and 1000Base-TX -> 1000Base-T...
2008-03-12 Dave HayesMerge from vendor branch BSDINSTALLER:
2008-03-10 Sepherosa ZiehauAdd ETHER_BPF_MTAP() which will call vlan_ether_ptap...
2008-03-10 Sepherosa Ziehau- Embed ether vlan tag in mbuf packet header. Add...
2008-03-10 Sepherosa ZiehauAdd 'volatile' qualifier
2008-03-10 Sepherosa ZiehauSet framelen to 0; it might be used without being initi...
2008-03-08 Sepherosa Ziehau- In command RX intr, if the command number returned...
2008-03-07 Sepherosa ZiehauParallelize ifnet.if_addrhead accessing by duplicating...
2008-03-06 Peter AvalosAdvertise to CAM the ability of 790X controllers to...
2008-03-06 Peter AvalosRemove superfluous setting of the transport_version...
2008-03-06 Peter AvalosOnly print sense data diagnostics if debugging is enabl...
2008-03-06 Sepherosa ZiehauMake sure stack variable is cleared.
2008-03-05 Sepherosa ZiehauRewrite driver for Intel 2100BG:
2008-03-01 Sascha WildnerAnsify some remaining function definitions in the kernel.
2008-02-28 Sascha WildnerAdd an experimental driver for NICs using Silan Microel...
2008-02-28 Thomas E. SpanjaardRemove unmatched crit_exit() from dsp_ioctl(). A critic...
2008-02-21 Hasso TepperAdd more device id's to the ugensa(4) taken mostly...
2008-02-20 Hasso TepperAdd some Sierra Wireless devices found in Linux sierra...
2008-02-15 Sepherosa ZiehauTypo
2008-02-15 Sepherosa Ziehau- Try adjusting TX power as much as possible when doing...
2008-02-14 Sepherosa ZiehauRelease serializer around firmware_load_image() to...
2008-02-11 Hasso Tepperumsm(4) -> ugensa(4) as it makes much more sense -...
2008-02-11 Matthew DillonMake the Brother HL1240 printer work with ulpt.
2008-02-10 Sepherosa Ziehau- Turn on IFM_HDX
2008-02-10 Peter AvalosMake CAM_NEW_TRAN_CODE default.
2008-02-09 Peter AvalosMerge from vendor branch TNFTP:
2008-02-09 Peter AvalosMPSAFE locking for the ahc/ahd drivers using lockmgr...
2008-02-08 Sepherosa ZiehauUse per softc debug level instead of a global one.
2008-02-06 Sepherosa Ziehau- Use firmware(9) for acx(4) and revoke acx(4)'s privat...
2008-02-06 Sepherosa Ziehau- Add sysctl nodes for statistics (*)
2008-02-05 Sepherosa ZiehauSet flow control pause time to 512us _again_ as it...
2008-02-04 Sascha WildnerDon't use special CWARNFLAGS. Our default is good enough.
2008-02-03 Hasso TepperImplement SCO related sysctls.
2008-02-01 Sepherosa ZiehauNuke following outdated drivers
2008-02-01 Hasso TepperMore wicontrol(8) removal.
2008-01-31 Simon SchubertMerge from vendor branch GDB:
2008-01-30 Hasso TepperMerge from vendor branch LIBEVENT:
2008-01-30 Chris TurnerAdd '-l' support to vnconfig(8) and supporting VNGET...
2008-01-25 Sepherosa Ziehau- It does not make sense to use "for (;cond;)", use...
2008-01-25 Sepherosa ZiehauSet 2560 part default txpower to 24dBm. This value...
2008-01-25 Sepherosa Ziehaural(4) for 2560 part does not support hardware WEP...
2008-01-25 Sepherosa ZiehauThere are actually two TX queues for 2560 parts, so...
2008-01-25 Sepherosa ZiehauDon't reset watchdog timeout value, if there are still...
2008-01-25 Sepherosa Ziehau- Correct false CCA based RX sensitivity tuning.
2008-01-25 Sepherosa ZiehauAdd sysctl node to set RX sensitivity, useful when...
2008-01-23 Sepherosa ZiehauTurn on VALID bit in TX desc only after the TX desc...
2008-01-21 Peter AvalosCAM_NEW_TRAN_CODE fixes.
2008-01-21 Peter AvalosCAM_NEW_TRAN_CODE fixes.
2008-01-21 Peter AvalosCAM_NEW_TRAN_CODE fixes.
2008-01-21 Peter AvalosSync mly(4) with FreeBSD.
2008-01-20 Sepherosa ZiehauAfter the channel TX power bug fixing in rt2560_read_co...
2008-01-20 Peter AvalosMassive sync with FreeBSD.
2008-01-19 Peter AvalosMerge from vendor branch FILE:
2008-01-19 Sepherosa ZiehauFor 2560 parts:
2008-01-19 Sepherosa Ziehau- Setup BBP according to the values stored in BBP
2008-01-19 Sepherosa Ziehau- Don't set hardware slot time according to "short...
2008-01-19 Sascha WildnerRemove some unnecessary initialization.
2008-01-18 Matthias SchmidtFix a bug preventing burncd(8) from dispaying the progr...
2008-01-18 Sepherosa ZiehauNuke staled code
2008-01-18 Sepherosa Ziehau- Extract RX sensitivity calibration capability from...
2008-01-18 Sepherosa Ziehau- If channel TX power from EEPROM is above 32, set...
2008-01-18 Sepherosa ZiehauFix EEPROM channel TX power parsing.
2008-01-17 Sepherosa ZiehauAdd TX power compensation support in TX power calibration.
2008-01-17 Sepherosa ZiehauAdd RX sensitivity calibration according to false CCA...
2008-01-17 Sepherosa Ziehau- Add auto TX power and RX sensitivity calibration...
2008-01-16 Sepherosa ZiehauNuke staled code
2008-01-16 Sepherosa Ziehau- Save two sets of average RSSI for 2529RF
2008-01-16 Matthias SchmidtUpdate the list of USB device IDs for umass(4) and...
2008-01-16 Matthias SchmidtUpdate the list of USB device IDs for uscanner(4).
2008-01-16 Matthias SchmidtUpdated the list of USB device IDs for uvscom(4).
2008-01-16 Matthias SchmidtUpdated the list of USB device IDs for uvisor(4) and...
2008-01-15 Hasso TepperIncrease size of the umsm(4) buffers and tty(4) input...
next