dragonfly.git
11 years agoAdd vfs.nfs.flush_on_hlink and default to off.
Matthew Dillon [Sat, 18 Oct 2008 01:13:54 +0000 (01:13 +0000)]
Add vfs.nfs.flush_on_hlink and default to off.

11 years agoCorrect jumbo frame support for 8168C/CP/D.
Sepherosa Ziehau [Fri, 17 Oct 2008 14:12:23 +0000 (14:12 +0000)]
Correct jumbo frame support for 8168C/CP/D.

These newer chips use ancient design, which does _not_ support gathering RX.
An even worse aspect of the new chips' design is that it does not compat
with old ones: the buffer length field in the RX descriptor seems to be
completely ignored by the hardware.  This means host memory will be trashed
by hardware if driver uses gathering RX.

Allocate a jumbo buffer pool for these chips and configure "max RX packet
size" register according to MTU.

11 years agoFix some typos.
Sascha Wildner [Fri, 17 Oct 2008 12:41:38 +0000 (12:41 +0000)]
Fix some typos.

Found-by: LanguageTool
11 years agoChange 'then' to 'than' in comparisons.
Sascha Wildner [Fri, 17 Oct 2008 11:30:24 +0000 (11:30 +0000)]
Change 'then' to 'than' in comparisons.

Found-by: LanguageTool
11 years agoUse standard markup for one or more files.
Sascha Wildner [Fri, 17 Oct 2008 07:52:56 +0000 (07:52 +0000)]
Use standard markup for one or more files.

11 years agoChange 'then' to 'than' in comparisons.
Sascha Wildner [Thu, 16 Oct 2008 23:08:30 +0000 (23:08 +0000)]
Change 'then' to 'than' in comparisons.

Found-by: LanguageTool
11 years agoAdd KQUEUE support to HAMMER.
Matthew Dillon [Thu, 16 Oct 2008 17:24:16 +0000 (17:24 +0000)]
Add KQUEUE support to HAMMER.

11 years agoAdd a new utility called 'monitor' which uses kqueue to monitor a
Matthew Dillon [Thu, 16 Oct 2008 17:23:20 +0000 (17:23 +0000)]
Add a new utility called 'monitor' which uses kqueue to monitor a
list of files and directories specified on the command line.

11 years agoAdjust max read request size according to MTU; 512 seems to be the only
Sepherosa Ziehau [Thu, 16 Oct 2008 14:58:50 +0000 (14:58 +0000)]
Adjust max read request size according to MTU; 512 seems to be the only
value that works with jumbo frames without "watchdog timeout" during
UDP_STREAM netperf tests.

11 years agoAccording to wpaul's comment, 8139C+ only support 64 TX/RX descriptors
Sepherosa Ziehau [Thu, 16 Oct 2008 12:46:40 +0000 (12:46 +0000)]
According to wpaul's comment, 8139C+ only support 64 TX/RX descriptors

11 years agoAdd hardware csum offload support for MAC style 2 chips, which include
Sepherosa Ziehau [Thu, 16 Oct 2008 12:29:13 +0000 (12:29 +0000)]
Add hardware csum offload support for MAC style 2 chips, which include
8102E, 8102EL, 8168C, 8168CP and 8168D.

Obtained-from: RealTek r8101-1.009.00 r8168-8.008.00

Add RE_C_AUTOPAD capability to indicate hardware could correctly pad
short ether frames.  Turn it on for newer version of 8168B (0x38000000
and 0xb8000000) and MAC style 2 chips; manually padding short UDP packets
for newer version 8168B will result in incorrect UDP csum, while manually
padding short ICMP packets for MAC style 2 chips will result in both
incorrect IP header csum and incorrect IP length (o_O)

11 years agoXref utrace(2) from ktrace(2) instead of ktrace(1).
Sascha Wildner [Thu, 16 Oct 2008 08:15:18 +0000 (08:15 +0000)]
Xref utrace(2) from ktrace(2) instead of ktrace(1).

11 years agoAdd man page for utrace(2). With modifications from FreeBSD. Xref utrace(2)
Matthias Schmidt [Thu, 16 Oct 2008 07:58:43 +0000 (07:58 +0000)]
Add man page for utrace(2).  With modifications from FreeBSD.  Xref utrace(2)
in ktrace(1).

11 years ago* Silence -Wold-style-definition (i.e., ansify).
Sascha Wildner [Thu, 16 Oct 2008 01:52:34 +0000 (01:52 +0000)]
* Silence -Wold-style-definition (i.e., ansify).

* Remove 'register'.

* Remove P() and friends.

11 years agoChange hammer_str_to_tid() and its callers to restrict the format of
Matthew Dillon [Wed, 15 Oct 2008 22:38:37 +0000 (22:38 +0000)]
Change hammer_str_to_tid() and its callers to restrict the format of
strings after the '@@' portion of the filename.  Unknown formats are
simply passed through, so for example you can create a file called 'x@@b'
without it thinking it is 'x' with a @@b transaction id extension.

The formats allowed are:

    @@0x%016llx[:%05d]
    @@-1[:%05d]

Any other format is passed through and not treated specially.

Reported-by: "Steve O'Hara-Smith" <steve@sohara.org>
11 years agoAdd code to parse the utrace(2) entries generated by malloc(3) in a more
Hasso Tepper [Wed, 15 Oct 2008 16:04:11 +0000 (16:04 +0000)]
Add code to parse the utrace(2) entries generated by malloc(3) in a more
human-readable format.

Obtained-from: FreeBSD

11 years agoFix another path
Matthias Schmidt [Wed, 15 Oct 2008 12:48:34 +0000 (12:48 +0000)]
Fix another path

11 years agoUse cred from componentname, don't access curthread
Aggelos Economopoulos [Wed, 15 Oct 2008 12:12:51 +0000 (12:12 +0000)]
Use cred from componentname, don't access curthread

11 years agoFix path to the dhcpd.conf file.
Matthias Schmidt [Wed, 15 Oct 2008 11:39:49 +0000 (11:39 +0000)]
Fix path to the dhcpd.conf file.

11 years agoAdd some DragonFly specific tips.
Matthias Schmidt [Wed, 15 Oct 2008 09:56:22 +0000 (09:56 +0000)]
Add some DragonFly specific tips.

11 years agoRemove unused variable.
Sascha Wildner [Tue, 14 Oct 2008 21:25:14 +0000 (21:25 +0000)]
Remove unused variable.

Found-by: LLVM/Clang Static Analyzer
11 years ago- Adjust PCI latency timer on all types of chips
Sepherosa Ziehau [Tue, 14 Oct 2008 15:11:38 +0000 (15:11 +0000)]
- Adjust PCI latency timer on all types of chips
- Adjust PCI cache line size for 8110/8169 chips
- For certain revision of 8101E, reading MAC address from IDRx may not
  work; read from EEPROM instead
- Add comment that adjusting config1 and config5 may cause unrecoverible
  disaster

Obtained-from: RealTek Linux drivers

11 years ago0x28000000 is 8168D according to Realtek r8168-8.008.00 driver
Sepherosa Ziehau [Tue, 14 Oct 2008 10:42:35 +0000 (10:42 +0000)]
0x28000000 is 8168D according to Realtek r8168-8.008.00 driver

11 years agoSync zoneinfo database with tzdata2008h from elsie.
Sascha Wildner [Mon, 13 Oct 2008 19:53:54 +0000 (19:53 +0000)]
Sync zoneinfo database with tzdata2008h from elsie.

africa:         8.16 -> 8.17
asia:           8.23 -> 8.24
southamerica:   8.29 -> 8.30
zone.tab:       8.18 -> 8.19

From Arthur David Olson's comments:

africa       - Change Maurituis transition hours to 2:00 *standard* time.
asia         - Change Syrian end of DST from October 1 to November 1.
southamerica - Add comment on new law 26350 (no data change yet).
zone.tab     - Fix Niue's longitude.

11 years agoAdd some PHY fixups before we do mii_phy_probe()
Sepherosa Ziehau [Mon, 13 Oct 2008 14:10:42 +0000 (14:10 +0000)]
Add some PHY fixups before we do mii_phy_probe()

Obtained-from: Realtek BSD driver v176

11 years agoBring in some PCI register settings from RealTek BSD driver v176. Disable
Sepherosa Ziehau [Mon, 13 Oct 2008 13:04:41 +0000 (13:04 +0000)]
Bring in some PCI register settings from RealTek BSD driver v176.  Disable
the PCI register configuration for "style 2 MAC", add comment about it.

11 years ago- Read ethernet address from IDRx registers.
Sepherosa Ziehau [Mon, 13 Oct 2008 11:35:02 +0000 (11:35 +0000)]
- Read ethernet address from IDRx registers.
  Obtained-from: RealTek BSD driver v176
  This eliminates the need to read/config EEPROM.  Put EEPROM related
  functions under RE_USE_EEPROM; disabled by default
- Maintain re_softc size no matter what kernel options we are using
- Remove RE_DISABLE_HWCSUM; we could do it by clearing RE_C_HWCUM

11 years agore_softc.re_swcum_lim is applied to ethernet frame without trailing CRC, so
Sepherosa Ziehau [Mon, 13 Oct 2008 10:52:23 +0000 (10:52 +0000)]
re_softc.re_swcum_lim is applied to ethernet frame without trailing CRC, so
it should include the size of ether header.

11 years agoAvoid following possible race:
Sepherosa Ziehau [Sun, 12 Oct 2008 11:17:08 +0000 (11:17 +0000)]
Avoid following possible race:
When we tell the hardware that the RX descriptor is ready to be reused, its
buffer content is not duplicated yet.

Reported-by: Jordan Gordeev <jgordeev@dir.bg>
11 years ago- Nuke re_type, add RE_C_8139CP to indicate the chip is 8139C+
Sepherosa Ziehau [Sun, 12 Oct 2008 10:19:31 +0000 (10:19 +0000)]
- Nuke re_type, add RE_C_8139CP to indicate the chip is 8139C+
- Change hardware revision mask from 0x7cc00000 to 0xfc800000
  Obtained-from: Realtek BSD driver v176
- Convert MAC mode to MAC version and save MAC version in softc
  Obtained-from: Realtek BSD driver v176
- Add hardware revision 0x34800000(8102E) and 0x28000000(chip name is unknown)
  Obtained-from: Realtek BSD driver v176

11 years agoRework re_probe()
Sepherosa Ziehau [Sun, 12 Oct 2008 04:08:59 +0000 (04:08 +0000)]
Rework re_probe()

11 years agoRename some HWREV
Sepherosa Ziehau [Thu, 9 Oct 2008 14:30:48 +0000 (14:30 +0000)]
Rename some HWREV

11 years agoUpdate man page to reflect recent changes
Sepherosa Ziehau [Thu, 9 Oct 2008 13:45:16 +0000 (13:45 +0000)]
Update man page to reflect recent changes

11 years agoIncrease default RX/TX descriptor count from 64 to 256
Sepherosa Ziehau [Thu, 9 Oct 2008 12:46:40 +0000 (12:46 +0000)]
Increase default RX/TX descriptor count from 64 to 256

11 years agoUse hardware timer to simulate interrupt moderation. Old devices will no
Sepherosa Ziehau [Thu, 9 Oct 2008 12:41:02 +0000 (12:41 +0000)]
Use hardware timer to simulate interrupt moderation.  Old devices will no
longer be livelocked when they are receiving on GigE line.  Newer devices
also gain well controlled interrupt rate.

If hardware supports interrupt moderation (e.g. 8168B, 8168C), you could
also use hardware based interrupt moderation, however, due to lack of
necessary information it does not work as reliably as simulated interrupt
moderation.  It is _not_ recommended currently.

By default, PCI-E devices' simulated interrupt moderation timer is set to
75us, while PCI devices' is set to 125us.

11 years agoAdd code to verify the data CRC by default, in addition to the B-Tree
Matthew Dillon [Thu, 9 Oct 2008 04:20:59 +0000 (04:20 +0000)]
Add code to verify the data CRC by default, in addition to the B-Tree
node CRCs.

11 years ago - sync usage() to man
Thomas Nikolajsen [Wed, 8 Oct 2008 21:01:54 +0000 (21:01 +0000)]
 - sync usage() to man
 - move snapshot command up, to reflect typical use

11 years agoLINKCHG interrupt is still needed
Sepherosa Ziehau [Wed, 8 Oct 2008 13:09:22 +0000 (13:09 +0000)]
LINKCHG interrupt is still needed

11 years ago - fix UP build
Thomas Nikolajsen [Tue, 7 Oct 2008 22:30:31 +0000 (22:30 +0000)]
 - fix UP build

11 years ago - sync usage() to manual
Thomas Nikolajsen [Tue, 7 Oct 2008 22:28:41 +0000 (22:28 +0000)]
 - sync usage() to manual
 - use `PFS #' in output, not `pfs_id' sometimes

11 years ago - null mount for PFS slave can't be set up before first mirroring operation,
Thomas Nikolajsen [Tue, 7 Oct 2008 22:23:12 +0000 (22:23 +0000)]
 - null mount for PFS slave can't be set up before first mirroring operation,
   as PFS slave path is unusable, as described in example
 - add markup

11 years ago- According to Realtek's BSD driver v176, we could always write to MISSEDPKT
Sepherosa Ziehau [Tue, 7 Oct 2008 12:49:05 +0000 (12:49 +0000)]
- According to Realtek's BSD driver v176, we could always write to MISSEDPKT
- Use pci_get_pciecap_ptr() to decide whether a given chip is PCI-E or not
- Rename re_flags to re_caps; we will need a real re_flags soon

11 years ago- It does not make sense to disable TX interrupt moderation
Sepherosa Ziehau [Tue, 7 Oct 2008 11:57:18 +0000 (11:57 +0000)]
- It does not make sense to disable TX interrupt moderation
- Add field in softc to store RX related interrupt bits

This cleanup eases upcoming changes.

11 years ago- Nuke interrupt bits definition which don't apply to 8169
Sepherosa Ziehau [Tue, 7 Oct 2008 11:39:36 +0000 (11:39 +0000)]
- Nuke interrupt bits definition which don't apply to 8169
- Don't test TX desc unavailable bit in re_intr, since it is never enabled

11 years agoAdd missing .Lb
Sascha Wildner [Tue, 7 Oct 2008 06:57:40 +0000 (06:57 +0000)]
Add missing .Lb

11 years agoAdd some xrefs.
Sascha Wildner [Mon, 6 Oct 2008 21:21:30 +0000 (21:21 +0000)]
Add some xrefs.

11 years agoPOSIX conformance:
Sascha Wildner [Mon, 6 Oct 2008 21:01:37 +0000 (21:01 +0000)]
POSIX conformance:

Add fmtmsg(3), posix_madvise(3), strfmon(3) and wordexp(3).

Taken-from: FreeBSD

11 years agoSync zoneinfo database with tzdata2008g from elsie.
Sascha Wildner [Mon, 6 Oct 2008 16:26:22 +0000 (16:26 +0000)]
Sync zoneinfo database with tzdata2008g from elsie.

southamerica:   8.27 -> 8.29

From 2008 on, DST in Brazil will be from the 3rd Sunday in October to the
3rd Sunday in February. If Carnival Sunday happens to be on the same day,
DST ends a week later.

11 years ago- Rearrange comment
Sepherosa Ziehau [Mon, 6 Oct 2008 14:51:10 +0000 (14:51 +0000)]
- Rearrange comment
- Reduce RX im timer from 125us to 50us

11 years agoAdd RX interrupt moderation suport for PCI-E GigaE chips.
Sepherosa Ziehau [Mon, 6 Oct 2008 14:22:32 +0000 (14:22 +0000)]
Add RX interrupt moderation suport for PCI-E GigaE chips.

Interrupt moderation register position is obtained from Realtek's
BSD driver v176.
The meaning of the IM register bits is partially reverse engineered:
RX timer position and unit.

This kind of interrupt moderation does not work on PCI GigaE chips.

11 years agoFix bug: sprintf() was used where snprintf() was meant.
Sascha Wildner [Sun, 5 Oct 2008 18:26:41 +0000 (18:26 +0000)]
Fix bug: sprintf() was used where snprintf() was meant.

11 years agoNuke obsolete DEVICE_SYSCTLS option.
Sascha Wildner [Sun, 5 Oct 2008 10:45:28 +0000 (10:45 +0000)]
Nuke obsolete DEVICE_SYSCTLS option.

11 years agore_freebufmem() may be re-entered, so set the mbuf tag to NULL after it is
Sepherosa Ziehau [Sun, 5 Oct 2008 08:28:32 +0000 (08:28 +0000)]
re_freebufmem() may be re-entered, so set the mbuf tag to NULL after it is
destroyed.

11 years ago- Set hardware timer according to bus clock. Adjust hardware timer to 8000HZ
Sepherosa Ziehau [Sun, 5 Oct 2008 07:57:45 +0000 (07:57 +0000)]
- Set hardware timer according to bus clock.  Adjust hardware timer to 8000HZ
- For PCI-E device, increase "max read request size" from default value (512)
  to 4096.  With 512 TX descriptors, this change gives me additional +80-90Mbps
  during netperf stream tests on an 8168C.

11 years agoGet bus clock, which will be used to fix broken TCTR setting (hardware timer,
Sepherosa Ziehau [Sun, 5 Oct 2008 06:15:36 +0000 (06:15 +0000)]
Get bus clock, which will be used to fix broken TCTR setting (hardware timer,
interrupt moderation related)

11 years agoSet ifq maxlen according to number of TX descriptors
Sepherosa Ziehau [Sun, 5 Oct 2008 05:00:58 +0000 (05:00 +0000)]
Set ifq maxlen according to number of TX descriptors

11 years agoAdd tunable for RX/TX descriptor count
Sepherosa Ziehau [Sun, 5 Oct 2008 04:54:51 +0000 (04:54 +0000)]
Add tunable for RX/TX descriptor count

11 years agoDon't assume that RE_RX_DESC_CNT and RE_TX_DESC_CNT are always same
Sepherosa Ziehau [Sun, 5 Oct 2008 02:13:06 +0000 (02:13 +0000)]
Don't assume that RE_RX_DESC_CNT and RE_TX_DESC_CNT are always same

11 years agoMove some macros from if_rereg.h to if_revar.h; regroup them
Sepherosa Ziehau [Sun, 5 Oct 2008 01:53:41 +0000 (01:53 +0000)]
Move some macros from if_rereg.h to if_revar.h; regroup them

11 years agore_chain_data is never used
Sepherosa Ziehau [Sun, 5 Oct 2008 01:43:09 +0000 (01:43 +0000)]
re_chain_data is never used

11 years agoWhitespace adjustment.
Sascha Wildner [Sat, 4 Oct 2008 22:38:42 +0000 (22:38 +0000)]
Whitespace adjustment.

11 years agoRemove unnecessary .Pp
Sascha Wildner [Sat, 4 Oct 2008 22:36:25 +0000 (22:36 +0000)]
Remove unnecessary .Pp

11 years ago* Constify return type of gai_strerror() as per bwg2001-009
Sascha Wildner [Sat, 4 Oct 2008 22:09:17 +0000 (22:09 +0000)]
* Constify return type of gai_strerror() as per bwg2001-009
  (see http://www.opengroup.org/platform/resolutions/bwg2001-many.html).

* Return EAI_OVERFLOW instead of EAI_MEMORY when the supplied buffer is
  too short. This conforms to RFC 3493, POSIX and XPG6.

* Add a gai_strerror(3) manual page.

Taken-from: FreeBSD

11 years agoSilence warning on UP build with KTR.
Sascha Wildner [Sat, 4 Oct 2008 14:22:44 +0000 (14:22 +0000)]
Silence warning on UP build with KTR.

11 years ago- Add tunable (net.link.ether.inet.arp_mpsafe) to register ARP as MPSAFE netisr.
Sepherosa Ziehau [Sat, 4 Oct 2008 11:26:09 +0000 (11:26 +0000)]
- Add tunable (net.link.ether.inet.arp_mpsafe) to register ARP as MPSAFE netisr.
- Hold BGL on CARP in arp input path.

11 years agoOn ethernet output path:
Sepherosa Ziehau [Sat, 4 Oct 2008 11:24:37 +0000 (11:24 +0000)]
On ethernet output path:
Hold BGL on IPX, ATALK, CARP and netgraph

11 years agoRecheck ifnet.if_bpf after we hold the BGL
Sepherosa Ziehau [Sat, 4 Oct 2008 11:21:10 +0000 (11:21 +0000)]
Recheck ifnet.if_bpf after we hold the BGL

11 years ago- For relative newer parts (8168B), setting MTPS (max transmit packet size)
Sepherosa Ziehau [Sat, 4 Oct 2008 10:36:21 +0000 (10:36 +0000)]
- For relative newer parts (8168B), setting MTPS (max transmit packet size)
  according to MTU makes jumbo frame + TX csum offloading work.  However,
  for old ones (8169), setting MTPS does not have much effect.
- Reduce max jumbo frame size from 9018 to 7440 (according to DS)
- Fix MTU setting in re_ioctl

11 years agoHow buggy this little piece of code could be? Repair strnvis() buffersize
Hasso Tepper [Sat, 4 Oct 2008 09:57:14 +0000 (09:57 +0000)]
How buggy this little piece of code could be? Repair strnvis() buffersize
of 4*n+1, with termination gauranteed by the function.

Obtained-from: OpenBSD

11 years ago - adjust boot command description for booting from
Thomas Nikolajsen [Fri, 3 Oct 2008 21:26:28 +0000 (21:26 +0000)]
 - adjust boot command description for booting from
   root of boot-only file system
 - improve markup
 - fix exmaple of dummy s0 partition to use enough space for disklabel

11 years agoStart sentence on new line.
Thomas Nikolajsen [Fri, 3 Oct 2008 20:09:12 +0000 (20:09 +0000)]
Start sentence on new line.

11 years agoSilence remaining "'packed' attribute ignored for field of type..." warnings.
Sascha Wildner [Fri, 3 Oct 2008 19:56:11 +0000 (19:56 +0000)]
Silence remaining "'packed' attribute ignored for field of type..." warnings.

Verified-with: md5

11 years ago - fix description of time (cleanup): suffix is mandantory
Thomas Nikolajsen [Fri, 3 Oct 2008 18:55:57 +0000 (18:55 +0000)]
 - fix description of time (cleanup): suffix is mandantory
 - describe period use (cleanup)
 - use `cyclefile' everywhere, not cycle file

11 years agoFree sysctl tree during detach
Sepherosa Ziehau [Fri, 3 Oct 2008 14:14:10 +0000 (14:14 +0000)]
Free sysctl tree during detach

11 years agoTransmit csum offload does not work at all on certain hardware revision
Sepherosa Ziehau [Fri, 3 Oct 2008 14:07:02 +0000 (14:07 +0000)]
Transmit csum offload does not work at all on certain hardware revision
once frame length exceeds certain threshold (different parts seems to
have different thresholds).  Borrow code from ip_output to do software
csum, if transmit csum offloading is enabled and frame length exceeds
hardware's threshold.

8169, 8169S, 8169SB and 8168B are tested, while 8169S and 8169SB does not
seem to have this bug.

11 years agoDon't allocate space for empty banners. Makes me able to connect various
Hasso Tepper [Fri, 3 Oct 2008 12:30:07 +0000 (12:30 +0000)]
Don't allocate space for empty banners. Makes me able to connect various
network equipment again.

Obtained-from: OpenBSD CVS

11 years agoPrint hardware revision during attach
Sepherosa Ziehau [Fri, 3 Oct 2008 11:35:25 +0000 (11:35 +0000)]
Print hardware revision during attach

11 years agoether_demux() is now ether_demux_oncpu().
Sascha Wildner [Fri, 3 Oct 2008 10:46:41 +0000 (10:46 +0000)]
ether_demux() is now ether_demux_oncpu().

11 years agoRe-add some previously removed docs about devd(8) notifies.
Sascha Wildner [Fri, 3 Oct 2008 10:33:49 +0000 (10:33 +0000)]
Re-add some previously removed docs about devd(8) notifies.

11 years agoRemove extra comma and bump .Dd
Sascha Wildner [Fri, 3 Oct 2008 10:32:10 +0000 (10:32 +0000)]
Remove extra comma and bump .Dd

11 years agoBump .Dd
Sascha Wildner [Fri, 3 Oct 2008 10:30:43 +0000 (10:30 +0000)]
Bump .Dd

11 years agoAdjust for recent devd(8) import.
Sascha Wildner [Fri, 3 Oct 2008 10:27:42 +0000 (10:27 +0000)]
Adjust for recent devd(8) import.

11 years ago- Don't substract ETHER_ALIGN from the fragment length, we don't do
Sepherosa Ziehau [Fri, 3 Oct 2008 10:12:35 +0000 (10:12 +0000)]
- Don't substract ETHER_ALIGN from the fragment length, we don't do
  m_adj(ETHET_ALIGN) in re_newbuf()
- If one fragment of a multi-fragment packet recolletion fails, we
  drop will consecutive fragments of this packet.
- All of the TX descs in TX ring could be used; there is no need to
  reserve RE_TXDESC_SPARE TX descs

11 years agoPrefix hex numbers with '0x' in debug messages.
Sascha Wildner [Fri, 3 Oct 2008 09:25:18 +0000 (09:25 +0000)]
Prefix hex numbers with '0x' in debug messages.

11 years agoCorrectly handle Intel g33 chips and add support for g45 chips.
Hasso Tepper [Fri, 3 Oct 2008 08:56:58 +0000 (08:56 +0000)]
Correctly handle Intel g33 chips and add support for g45 chips.

Obtained-from: FreeBSD

11 years agoFactor out re_free_rxchain()
Sepherosa Ziehau [Fri, 3 Oct 2008 08:00:06 +0000 (08:00 +0000)]
Factor out re_free_rxchain()

11 years agoIf a neighbor solictation or neighbor advertisement isn't from the
Hasso Tepper [Fri, 3 Oct 2008 07:59:20 +0000 (07:59 +0000)]
If a neighbor solictation or neighbor advertisement isn't from the
unspecified address, make sure that the source address matches one of the
interfaces address prefixes.

CVE-2008-2476

Obtained-from: NetBSD with modifications

11 years agoRework DMA stuffs' allocation/free
Sepherosa Ziehau [Fri, 3 Oct 2008 07:52:26 +0000 (07:52 +0000)]
Rework DMA stuffs' allocation/free

11 years agoIf RX/TX ring initialization failed, then stop re(4) and return
Sepherosa Ziehau [Fri, 3 Oct 2008 05:47:07 +0000 (05:47 +0000)]
If RX/TX ring initialization failed, then stop re(4) and return

11 years agoRework re_newbuf() and re_encap()
Sepherosa Ziehau [Fri, 3 Oct 2008 05:09:18 +0000 (05:09 +0000)]
Rework re_newbuf() and re_encap()

11 years agodevctl(4)/devd(8) support in acpi_thinkpad(4).
Hasso Tepper [Fri, 3 Oct 2008 00:47:36 +0000 (00:47 +0000)]
devctl(4)/devd(8) support in acpi_thinkpad(4).

11 years agoWelcome devctl(4) and devd(8).
Hasso Tepper [Fri, 3 Oct 2008 00:26:21 +0000 (00:26 +0000)]
Welcome devctl(4) and devd(8).

Obtained-from: FreeBSD

11 years agoRegenerate the pciconf(8) database from the following files:
Sascha Wildner [Thu, 2 Oct 2008 07:51:51 +0000 (07:51 +0000)]
Regenerate the pciconf(8) database from the following files:

Hart:    Jan 22, 2008 (version 671)
Boemler: Oct  1, 2008
Mares:   Sep 16, 2008

11 years ago- Instead of using magic number 4 define it as RE_TXDESC_SPARE
Sepherosa Ziehau [Thu, 2 Oct 2008 04:14:13 +0000 (04:14 +0000)]
- Instead of using magic number 4 define it as RE_TXDESC_SPARE
- Clear if_timer only if all TX descs are free
- Clear IFF_OACTIVE only if more than RE_TXDESC_SPARE TX descs ar free

11 years agoDon't use .Fn for getcap. Reference it with .Xr instead.
Sascha Wildner [Wed, 1 Oct 2008 11:01:02 +0000 (11:01 +0000)]
Don't use .Fn for getcap. Reference it with .Xr instead.

11 years agoAdd KTR_ETHERNET.
Sascha Wildner [Wed, 1 Oct 2008 10:53:48 +0000 (10:53 +0000)]
Add KTR_ETHERNET.

11 years agoSplit arprequest() into two parts, arpreq_alloc() and arpreq_send().
Sepherosa Ziehau [Wed, 1 Oct 2008 09:16:18 +0000 (09:16 +0000)]
Split arprequest() into two parts, arpreq_alloc() and arpreq_send().
arprequest() simply calls these two functions sequencially.

Add arprequest_async(), which allocates the arp request using arpreq_alloc()
and then dispatch the real sending (arpreq_send()) to current CPU's netisr.
Callers of arprequest_async() do not need to worry about the ifp's serializer
state.  This function also makes sure that the network output happens in
TDF_NETWORK kernel thread.

Let arp_ifinit(), arp_ifinit2() and arp_rtrequest() call arprequest_async().

11 years ago- Constify 'enaddr'
Sepherosa Ziehau [Wed, 1 Oct 2008 07:29:16 +0000 (07:29 +0000)]
- Constify 'enaddr'
- Minor style change

11 years agoHAMMER Utilities: Adjust 'show' defaults.
Matthew Dillon [Tue, 30 Sep 2008 23:13:08 +0000 (23:13 +0000)]
HAMMER Utilities: Adjust 'show' defaults.

* 'hammer show' now defaults to full verboseness.

* -q may now be used to reduce verboseness.

11 years agoFix HISTORY.
Sascha Wildner [Tue, 30 Sep 2008 21:08:10 +0000 (21:08 +0000)]
Fix HISTORY.