dragonfly.git
13 years agoAdd support for generic prosigns by enabling ligatures.
Simon Schubert [Sun, 22 Apr 2007 23:03:48 +0000 (23:03 +0000)]
Add support for generic prosigns by enabling ligatures.

A ligature can be created by putting the letters in angle brackets, like `<KA>'.

13 years agoAdd the possibility to dump the generated audio to a file instead of playing it.
Simon Schubert [Sun, 22 Apr 2007 22:04:20 +0000 (22:04 +0000)]
Add the possibility to dump the generated audio to a file instead of playing it.

This can be used to create morse mp3s from input texts, like this:

morse -o | lame -r -s 44.1 -x -m m --resample 11 - morse.mp3

Add a comment on the timing calculation.

13 years agoProperly use .Cd
Sascha Wildner [Sun, 22 Apr 2007 20:40:20 +0000 (20:40 +0000)]
Properly use .Cd

13 years agoFix function name.
Sascha Wildner [Sun, 22 Apr 2007 16:29:50 +0000 (16:29 +0000)]
Fix function name.

13 years agoTurn off Sample TX rate control algorithm support for 2661d BBP. Due to
Sepherosa Ziehau [Sun, 22 Apr 2007 11:44:56 +0000 (11:44 +0000)]
Turn off Sample TX rate control algorithm support for 2661d BBP.  Due to
delayed/batched TX status report, Sample does not play well with this kind
of BBP.  Use Onoe TX rate control algorithm for 2661d BBP.

13 years agoPut a DELAY in the AT-style keyboard detection loop to wait
YONETANI Tomokazu [Sun, 22 Apr 2007 10:54:43 +0000 (10:54 +0000)]
Put a DELAY in the AT-style keyboard detection loop to wait
certain amount of time without relying on ISA bus timing.

Suggested-by: Matt
DragonFly-Bug: http://bugs.dragonflybsd.org/issue573

13 years agoWhen enabling A20, put upper limit on amount of time we wait for the
YONETANI Tomokazu [Sun, 22 Apr 2007 10:43:00 +0000 (10:43 +0000)]
When enabling A20, put upper limit on amount of time we wait for the
keyboard controller to get ready (65K x ISA access time, visually
around 1 second).  If we have wait more than that amount it's likely
that the hardware is a legacy-free one and simply doesn't have keyboard
controller and doesn't require enabling A20 at all.

Taken-from: FreeBSD (with modifications suggested by Matt)

 relavant commit logs(and discussion):
  http://docs.FreeBSD.org/cgi/mid.cgi?200604110439.k3B4dTOD072774
  http://docs.FreeBSD.org/cgi/mid.cgi?200604112053.k3BKrnC1053262
  http://docs.FreeBSD.org/cgi/mid.cgi?200604260605.k3Q65GZZ095546

13 years agoPull morse(6) into the new millenium and teach it to use sound(4).
Simon Schubert [Sun, 22 Apr 2007 10:22:32 +0000 (10:22 +0000)]
Pull morse(6) into the new millenium and teach it to use sound(4).

Feedback-by: swildner@
13 years ago- Define macro for the number of channels. Use it instead of the magic
Sepherosa Ziehau [Sun, 22 Apr 2007 09:14:46 +0000 (09:14 +0000)]
- Define macro for the number of channels.  Use it instead of the magic
  number.
- Define maximum and default channel TX power.
- The EEPROM regions, which contain 5GHz and 2GHz channels' TX power, are
  not contiguous.  Add rt2661_read_txpower_config() to read them seperately.
- Lower channel's TX power is in the lower byte of the 16bits EEPROM value,
  while upper channel's TX power is in the upper byte of the 16bits EEPROM
  value.
- Channel's TX power should never exceed maximum channel TX power, if it is
  set it to default channel TX power.
- Rename rt2661_read_eeprom() to rt2661_read_config(), since we already have
  rt2661_eeprom_read().

EEPROM layout, EEPROM values' layout and various limit values are obtained
from Ralink RT61 Linux driver.

13 years agoFix typo and use section numbers for .Xr.
Sascha Wildner [Sun, 22 Apr 2007 07:57:31 +0000 (07:57 +0000)]
Fix typo and use section numbers for .Xr.

13 years agoTXRX_CSR5 stores allowable ACK rates instead of basic rates, so rename
Sepherosa Ziehau [Sun, 22 Apr 2007 05:18:38 +0000 (05:18 +0000)]
TXRX_CSR5 stores allowable ACK rates instead of basic rates, so rename
rt2661_set_basicrates() to rt2661_set_ackrates().  Also turn on 6Mbits/s,
12Mbits/s and 24Mbits/s in ACK rates, if we are not forced to be in 11b
mode and to start/join an ERP BSS.  Now rt2661 part will send ACK at
24Mbits/s instead of 6Mbits/s, if the data to be acknowledged are sent at
rate above/equal 24Mbits/s, which is standard conforming and improves
performance a bit.

# This problem is identified by running following command on any NIC
# that can capture control frames and is aware of ERP:
#   tcpdump -ni iface -y ieee802_11_radio not wlan type mgt
# Pay attention to the rate, at which ACK gets sent ;]

13 years agoConst-fy rate set argument of ieee80211_iserp_rateset().
Sepherosa Ziehau [Sun, 22 Apr 2007 04:35:12 +0000 (04:35 +0000)]
Const-fy rate set argument of ieee80211_iserp_rateset().

13 years agoBusdma(9)-fy, mainly obtained from FreeBSD:
Sepherosa Ziehau [Sun, 22 Apr 2007 04:16:26 +0000 (04:16 +0000)]
Busdma(9)-fy, mainly obtained from FreeBSD:
if_bge.c rev 1.{45,76,81,85,101,105,106,109,151}
if_bgereg.h rev 1.{19,40}

Local changes:
- Factor out bge_dma_block_{alloc,free}() to avoid code duplication.
- Move jumbo buffer pool allocation/free into bge_dma_{alloc,free}().
- In bge_newbuf_std(), use bus_dmamap_load_mbuf() instead of bus_dmamap_load().
- Nuke vm header files inclusion.
- In bge_start():
  o   Bail out if OACTIVE is turned on or if bge(4) is not running yet.
  o   Move ifq_dequeue() before bge_encap(), since m_defrag() in bge_encap()
      will trash the mbuf parameter passed in.
  o   Make sure there are enough TX descriptors, before dequeuing mbuf and
      calling bge_encap().
- Don't call ifnet.if_start() on very interrupt, but at the end of bge_txeof().
- In bge_txeof(), if there are not enough TX descriptors, then don't clear
  OACTIVE.
- Minor style changes.

13 years agosbappendcontrol() was improperly setting sb_lastmbuf, creating a possible
Matthew Dillon [Sun, 22 Apr 2007 04:08:59 +0000 (04:08 +0000)]
sbappendcontrol() was improperly setting sb_lastmbuf, creating a possible
mbuf leak and/or sb_cc count mismatch.  The passed mbuf 'm' is a chain,
not a single mbuf, and must be iterated through to locate the last mbuf.

Optimize sbappend().  M_EOR is always set in the last mbuf and the sockbuf's
sb_lastmbuf and sb_lastrecord fields can be used instead of iterating
through all the mbufs in the sockbuf.  Only UNIX domain stream sockets used
this function.  Normal TCP connections use the already-optimized
sbappendstream() call.

Properly propogate M_EOR in sbappendcontrol() and sbappendaddr().

Do various code and comment cleanups.

13 years agoSync netstat up to the sockbuf changes.
Matthew Dillon [Sun, 22 Apr 2007 01:25:04 +0000 (01:25 +0000)]
Sync netstat up to the sockbuf changes.

13 years agoGive the sockbuf structure its own header file and supporting source file.
Matthew Dillon [Sun, 22 Apr 2007 01:13:17 +0000 (01:13 +0000)]
Give the sockbuf structure its own header file and supporting source file.
Move all sockbuf-specific functions from kern/uipc_socket2.c into the new
kern/uipc_sockbuf.c and move all the sockbuf-specific structures from
sys/socketvar.h to sys/sockbuf.h.

Change the sockbuf structure to only contain those fields required to
properly management a chain of mbufs.  Create a signalsockbuf structure
to hold the remaining fields (e.g. selinfo, mbmax, etc).

Change the so_rcv and so_snd structures in the struct socket from
a sockbuf to a signalsockbuf.

Remove the recently added sorecv_direct structure which was being used
to provide a direct mbuf path to consumers for socket I/O.  Use the newly
revamped sockbuf base structure instead.  This gives mbuf consumers
direct access to the sockbuf API functions for use outside of a struct
socket.  This will also allow new API functions to be added to the sockbuf
interface to ease the job of parsing data out of chained mbufs.

13 years agoJust throw all the main arguments for syslink() into syslink_info and
Matthew Dillon [Sun, 22 Apr 2007 00:59:27 +0000 (00:59 +0000)]
Just throw all the main arguments for syslink() into syslink_info and
pass the structure.  Do not pass the descriptor separately, do not pass
a pointer to the structure size (just pass the size directly).  The
search routines just return one structure at a time so a return size
field is not needed.

Start revamping syslink() to make it more mbuf-centric.  This work is
very much still in progress.

13 years agoDon't use .Xr for pathnames.
Sascha Wildner [Sat, 21 Apr 2007 22:42:22 +0000 (22:42 +0000)]
Don't use .Xr for pathnames.

13 years agoMerge from vendor branch TNFTP:
Peter Avalos [Sat, 21 Apr 2007 20:18:21 +0000 (20:18 +0000)]
Merge from vendor branch TNFTP:
Sync with NetBSD.  In addition to some bug fixes, this brings in -s srcaddr
functionality -- using srcaddr as the local IP address for the connection.

13 years agoSync with NetBSD. In addition to some bug fixes, this brings in -s srcaddr
Peter Avalos [Sat, 21 Apr 2007 20:18:21 +0000 (20:18 +0000)]
Sync with NetBSD.  In addition to some bug fixes, this brings in -s srcaddr
functionality -- using srcaddr as the local IP address for the connection.

13 years agoFix a memory leak in the uname/gname lookup cache.
Peter Avalos [Sat, 21 Apr 2007 17:44:12 +0000 (17:44 +0000)]
Fix a memory leak in the uname/gname lookup cache.

Obtained-from:  FreeBSD

13 years agoRemove argument to .Os.
Sascha Wildner [Sat, 21 Apr 2007 15:34:26 +0000 (15:34 +0000)]
Remove argument to .Os.

13 years agoBump .Dd for the -L option and add -L to the SYNOPSIS.
Sascha Wildner [Sat, 21 Apr 2007 15:25:18 +0000 (15:25 +0000)]
Bump .Dd for the -L option and add -L to the SYNOPSIS.

13 years agoConvert all pr_usrreqs structure initializations to the .name = data format.
Matthew Dillon [Sat, 21 Apr 2007 02:26:48 +0000 (02:26 +0000)]
Convert all pr_usrreqs structure initializations to the .name = data format.

13 years agoMake 'last mounted on' reporting by fsck work again. Add a new option
Matthew Dillon [Fri, 20 Apr 2007 22:20:12 +0000 (22:20 +0000)]
Make 'last mounted on' reporting by fsck work again.  Add a new option
to fsck (-L) which dumps the last mounted on field.

Submitted-by: Dave Hayes <dave@jetcafe.org>
13 years agoCreate the right symlinks for libpthread.so.0.
Simon Schubert [Fri, 20 Apr 2007 20:36:34 +0000 (20:36 +0000)]
Create the right symlinks for libpthread.so.0.

Submitted-by: Hasso Tepper <hasso@estpak.ee>
13 years agoFix link names with $DESTDIR.
Sascha Wildner [Fri, 20 Apr 2007 11:00:56 +0000 (11:00 +0000)]
Fix link names with $DESTDIR.

13 years ago1) Remove redundant -print's in EXAMPLES.
Sascha Wildner [Fri, 20 Apr 2007 08:04:20 +0000 (08:04 +0000)]
1) Remove redundant -print's in EXAMPLES.

2) Remove ports specific example.

[2] Spotted-by: Trevor Kendall <trevorjkendall@gmail.com>

13 years agoAdd a DEVICES section and vkd(4)/vke(4) MLINKS.
Sascha Wildner [Fri, 20 Apr 2007 07:04:09 +0000 (07:04 +0000)]
Add a DEVICES section and vkd(4)/vke(4) MLINKS.

13 years agoMake hw.vkeX.tap_unit sysctl read only.
Sascha Wildner [Fri, 20 Apr 2007 06:24:42 +0000 (06:24 +0000)]
Make hw.vkeX.tap_unit sysctl read only.

13 years agoClean up the so_pru_soreceive() API a bit to make it easier to read
Matthew Dillon [Fri, 20 Apr 2007 05:42:25 +0000 (05:42 +0000)]
Clean up the so_pru_soreceive() API a bit to make it easier to read
mbuf chains without having to use a fake UIO.

13 years agoWe have a few generation sets for Red-Black trees that implement RLOOKUP
Matthew Dillon [Thu, 19 Apr 2007 19:06:01 +0000 (19:06 +0000)]
We have a few generation sets for Red-Black trees that implement RLOOKUP
(ranged-lookup) for fixed numeric fields.  Add another one implementing
a generic RLOOKUP where the comparison function is passed to the generator.

13 years agoError out when parsing invalid IPv6 addresses.
Simon Schubert [Thu, 19 Apr 2007 12:52:29 +0000 (12:52 +0000)]
Error out when parsing invalid IPv6 addresses.

Submitted-by: Tatsuya BIZENN <bizenn@visha.org>
Obtained-from: NetBSD (supposedly)
DragonFly-Bug: http://bugs.dragonflybsd.org/issue591

13 years agoAllocations of size greater then the radix were not returning the correct
Matthew Dillon [Thu, 19 Apr 2007 03:16:33 +0000 (03:16 +0000)]
Allocations of size greater then the radix were not returning the correct
starting block.  For example, the second allocation of 32 blocks was returning
block 1 instead of block 32.

Also remove a redundant check in the code that was wasting cycles.

Submitted-by: Jason Smethers <jason@smethers.net>
13 years agoRemove 'register'.
Sascha Wildner [Wed, 18 Apr 2007 18:39:11 +0000 (18:39 +0000)]
Remove 'register'.

13 years agoAnsify parameter declarations and fix minor style issues.
Sascha Wildner [Wed, 18 Apr 2007 18:32:12 +0000 (18:32 +0000)]
Ansify parameter declarations and fix minor style issues.

13 years agoBuild libc_r before other libs, particularly before libpthread.
Simon Schubert [Tue, 17 Apr 2007 23:20:54 +0000 (23:20 +0000)]
Build libc_r before other libs, particularly before libpthread.

Fixes world breakage reported by tuxillo, aggelos and chlamydia.

13 years agoPoint P_tmpdir to /tmp instead of /var/tmp.
Simon Schubert [Tue, 17 Apr 2007 22:25:45 +0000 (22:25 +0000)]
Point P_tmpdir to /tmp instead of /var/tmp.

Temp files are much better of placed in /tmp than in the not-so-volatile
/var/tmp.  Additionally, people might get space issues or might have tuned
their /tmp for speed, but not /var/tmp.

Libiberty, among other consumers is using P_tmpdir to place the temp files,
leading compiler temp files being created in /var/tmp.

13 years agoDon't allow snd_nxt to be set to a value less then snd_una when restoring
Matthew Dillon [Tue, 17 Apr 2007 17:28:04 +0000 (17:28 +0000)]
Don't allow snd_nxt to be set to a value less then snd_una when restoring
snd_nxt in the TCP limited transmit code.  This can occur if the code
blocks and acks are processed prior to restoration.

This bug fix is currently unverified.  The possible trigger is running
netstat -an on a machine very heavily loaded with 6000+ network connections.

Reported-by: Peter Avalos <pavalos@theshell.com>
13 years agoAdd a proxy libpthread.
Simon Schubert [Tue, 17 Apr 2007 12:34:07 +0000 (12:34 +0000)]
Add a proxy libpthread.

In short, it works like this:  ld uses libpthread.so when linking.  There
the SONAME is set to libpthread.so.0.  This however is a symlink (or maybe
varsymlink) to one of the threading libs.  Voila, threading libs can be
switched at execution time and we won't get breakage because of two different
threading libs being used in the same binary.

Idea-by: joerg and me.
13 years agoChange the compilers to alias -pthread to -lpthread.
Simon Schubert [Tue, 17 Apr 2007 12:18:37 +0000 (12:18 +0000)]
Change the compilers to alias -pthread to -lpthread.

Now threaded programs do not get linked to libc_r anymore, but to the
proxy lib libpthread.  As soon as all programs and libraries are relinked
to use libpthread exclusively (and not libc_r.so anymore), threading libs
can be switched by changing the /usr/lib/libpthread.so.0 symlink.

Use the following command to find all packages still linking to libc_r:

find /usr/pkg/bin /usr/pkg/sbin /usr/pkg/lib /usr/pkg/libexec -type f \
  -exec sh -c '\
    objdump -p $0 2>/dev/null | grep -q "NEEDED.*libc_r\.so" || exit 0; \
    pkg_info -F -e $0' {} \; | sort | uniq

13 years agoProbably the last change to the syslink() system call. Allow a generic
Matthew Dillon [Mon, 16 Apr 2007 17:40:16 +0000 (17:40 +0000)]
Probably the last change to the syslink() system call.  Allow a generic
structure to be passed and returned and revamp the command structure.

13 years agoBring in the skeleton infrastructure and manual page for the new syslink
Matthew Dillon [Mon, 16 Apr 2007 17:36:04 +0000 (17:36 +0000)]
Bring in the skeleton infrastructure and manual page for the new syslink
utility.

13 years agoExpose number of TX/RX descriptors through read-only sysctl hw.emX.{txd,rxd}.
Sepherosa Ziehau [Sun, 15 Apr 2007 12:50:49 +0000 (12:50 +0000)]
Expose number of TX/RX descriptors through read-only sysctl hw.emX.{txd,rxd}.

Submitted-by: Hasso Tepper <hasso@estpak.ee>
Approved-by: dillon@
13 years agoChange build infrastructure over to sendmail 8.14.1.
Gregory Neil Shapiro [Sat, 14 Apr 2007 17:43:48 +0000 (17:43 +0000)]
Change build infrastructure over to sendmail 8.14.1.

Note that mail filters (aka, milters) compiled against the libmilter
included in the base operating system should be recompiled.

13 years agoFor bge_rxeof(), return immediately if no RX descs need to be processed, this
Sepherosa Ziehau [Sat, 14 Apr 2007 05:14:40 +0000 (05:14 +0000)]
For bge_rxeof(), return immediately if no RX descs need to be processed, this
optimization avoids two unnecessary register accessing and increase performance
a lot.  Same optimization is applied to bge_txeof(), but it will not have
real effect until bge(4) uses busdma(4) (i.e. will avoid extra sync)

Obtained-from: FreeBSD (oleg@freebsd.org)

13 years ago- Return error if reading eeprom times out.
Sepherosa Ziehau [Sat, 14 Apr 2007 04:35:10 +0000 (04:35 +0000)]
- Return error if reading eeprom times out.
  Obtained-from: FreeBSD
- Strip extra blank lines in bge_attach().

13 years agoBGE_MBX_TX_HOST_PROD0_LO is write-only, avoid reading it.
Sepherosa Ziehau [Sat, 14 Apr 2007 04:22:14 +0000 (04:22 +0000)]
BGE_MBX_TX_HOST_PROD0_LO is write-only, avoid reading it.

Obtained-from: NetBSD via FreeBSD

13 years agoSwitch binutils default to 2.17 and remove old gcc2 code.
Simon Schubert [Fri, 13 Apr 2007 12:26:56 +0000 (12:26 +0000)]
Switch binutils default to 2.17 and remove old gcc2 code.

13 years agoHook binutils-2.17 into the build.
Simon Schubert [Fri, 13 Apr 2007 12:26:42 +0000 (12:26 +0000)]
Hook binutils-2.17 into the build.

13 years agoAdd build infrastructure for binutils-2.17.
Simon Schubert [Fri, 13 Apr 2007 12:24:33 +0000 (12:24 +0000)]
Add build infrastructure for binutils-2.17.

13 years agoConvert assembly which accesses segment descriptors to use 16bit ops.
Simon Schubert [Fri, 13 Apr 2007 12:12:27 +0000 (12:12 +0000)]
Convert assembly which accesses segment descriptors to use 16bit ops.

13 years agoAdd our READMEs.
Simon Schubert [Fri, 13 Apr 2007 12:08:19 +0000 (12:08 +0000)]
Add our READMEs.

13 years agoMerge from vendor branch BINUTILS:
Simon Schubert [Fri, 13 Apr 2007 12:05:44 +0000 (12:05 +0000)]
Merge from vendor branch BINUTILS:
Import binutils-2.17.

13 years agoImport binutils-2.17. vendor/BINUTILS
Simon Schubert [Fri, 13 Apr 2007 12:05:44 +0000 (12:05 +0000)]
Import binutils-2.17.

13 years agofix critical-section mismatch
YONETANI Tomokazu [Fri, 13 Apr 2007 02:51:34 +0000 (02:51 +0000)]
fix critical-section mismatch

13 years agoAnsify parameter declarations.
Sascha Wildner [Thu, 12 Apr 2007 19:50:20 +0000 (19:50 +0000)]
Ansify parameter declarations.

In-collaboration-with: Alexey Slynko <slynko@tronet.ru>

13 years agoAnsify parameter declarations.
Sascha Wildner [Thu, 12 Apr 2007 18:35:09 +0000 (18:35 +0000)]
Ansify parameter declarations.

13 years agoWhen read BBP registers, avoid writing to BBPCSR until it is no longer busy.
Sepherosa Ziehau [Thu, 12 Apr 2007 12:54:07 +0000 (12:54 +0000)]
When read BBP registers, avoid writing to BBPCSR until it is no longer busy.
After this bug fixing, TX/RX antenna setup can be safely put after BBP
initialization, which is a correct place for it, since BBP initialization
will overwrite RX antenna BBP register with default value.  Before this bug
fixing, putting TX/RX antenna setup after BBP initailization always results
in strange TX/RX problems, which I experienced when I fiddled with my ASUS
WL-107G; and some OpenBSD folks had this problems too, before Damien reverted
related changes in OpenBSD.

2526 RF does not require special I/Q flipping during TX/RX antenna setup.

Obtained-from: Ralink RT2500 Linux driver

13 years agoAdd DragonFly instructions file to new version directory.
Gregory Neil Shapiro [Thu, 12 Apr 2007 03:30:24 +0000 (03:30 +0000)]
Add DragonFly instructions file to new version directory.

Note that I have changed to using a single directory for the major
version instead of a new directory for each minor version.  This
is a better method of tracking versions IMHO.

13 years agoMerge from vendor branch SENDMAIL:
Gregory Neil Shapiro [Thu, 12 Apr 2007 03:26:51 +0000 (03:26 +0000)]
Merge from vendor branch SENDMAIL:
Import sendmail 8.14.1

13 years agoImport sendmail 8.14.1
Gregory Neil Shapiro [Thu, 12 Apr 2007 03:26:51 +0000 (03:26 +0000)]
Import sendmail 8.14.1

13 years agoDisable ar support in libarchive due to buffer overflow bugs.
Simon Schubert [Wed, 11 Apr 2007 22:49:22 +0000 (22:49 +0000)]
Disable ar support in libarchive due to buffer overflow bugs.

Submitted-by: joerg@
13 years agoKernel virtual memory must be mapped on a segment address boundary. Try
Matthew Dillon [Wed, 11 Apr 2007 21:04:09 +0000 (21:04 +0000)]
Kernel virtual memory must be mapped on a segment address boundary.  Try
numerous addresses instead of a single fixed address to accomodate systems
that might have been compiled with a different MAXDSIZ.

13 years agoUse SHUT_RD instead of a hardcoded value of 0 in calls to shutdown().
Matthew Dillon [Wed, 11 Apr 2007 18:51:33 +0000 (18:51 +0000)]
Use SHUT_RD instead of a hardcoded value of 0 in calls to shutdown().

Submitted-by: "Nuno Antunes" <nuno.antunes@gmail.com>
Obtained-from: FreeBSD

13 years agoRemove ldconfig_paths_aout which was removed from the system.
Sascha Wildner [Wed, 11 Apr 2007 18:00:06 +0000 (18:00 +0000)]
Remove ldconfig_paths_aout which was removed from the system.

13 years agoRemove ldconfig_paths_aout, it is no longer used.
Matthew Dillon [Wed, 11 Apr 2007 17:46:39 +0000 (17:46 +0000)]
Remove ldconfig_paths_aout, it is no longer used.
Add /usr/pkg/lib to the default ldconfig_paths and remove /usr/X11R6/lib.
The path is now: /usr/lib/compat /usr/pkg/lib /usr/pkg/xorg/lib /usr/local/lib

pkgsrc packages use rpaths - absolute paths, and do not need ldd library
search paths.  However, we do want these libraries to be easily accessible
to manually compiled programs and until GCC starts using rpaths by default,
maintaining a default list is a good idea.

Submitted-by: Hasso Tepper <hasso@estpak.ee>

13 years ago<> -> ()
Sascha Wildner [Wed, 11 Apr 2007 09:12:08 +0000 (09:12 +0000)]
<> -> ()

13 years agoMisc. mdoc fixes.
Sascha Wildner [Wed, 11 Apr 2007 09:07:33 +0000 (09:07 +0000)]
Misc. mdoc fixes.

13 years agoDon't use \*[Px] because it leads to an unwanted font size change.
Sascha Wildner [Wed, 11 Apr 2007 06:51:35 +0000 (06:51 +0000)]
Don't use \*[Px] because it leads to an unwanted font size change.

Found-in: FreeBSD

13 years agoSwap "underflow" and "overflow" in table header.
Sascha Wildner [Tue, 10 Apr 2007 21:09:00 +0000 (21:09 +0000)]
Swap "underflow" and "overflow" in table header.

Obtained-from: FreeBSD

13 years agoSeparate punctuation.
Sascha Wildner [Mon, 9 Apr 2007 21:20:38 +0000 (21:20 +0000)]
Separate punctuation.

13 years agoOops, forgot to remove parentheses.
Sascha Wildner [Mon, 9 Apr 2007 20:47:01 +0000 (20:47 +0000)]
Oops, forgot to remove parentheses.

13 years agoUse .Fn for functions, fix .Nm usage.
Sascha Wildner [Mon, 9 Apr 2007 20:40:46 +0000 (20:40 +0000)]
Use .Fn for functions, fix .Nm usage.

13 years agoAdd subr_alist.c. This is a bitmap allocator that works very similarly to
Matthew Dillon [Mon, 9 Apr 2007 17:10:00 +0000 (17:10 +0000)]
Add subr_alist.c.  This is a bitmap allocator that works very similarly to
subr_blist.c (swap allocator), but with added considerations.

1. All allocations must be in powers of 2.
2. All allocations will be aligned to the allocation size.
3. No allocation size limit (blist was limited to 32 blocks per allocation)

Like the blist allocator, the alist is arranged in a linear array suitable
for direct mapping onto a storage medium.  A dataspace of 2^31-1 blocks may
be represented.  Approximately 3 bits of kernel memory is used per block.

This allocator will be used by HAMMER and ANVIL (filesystem and filesystem
storage manager), and by syslink route nodes to chop out individual addresses
and subnets.  We may also use this allocator to improve the allocation of
physical memory.

13 years agoRemove redundant -Wall option.
Sascha Wildner [Mon, 9 Apr 2007 09:45:12 +0000 (09:45 +0000)]
Remove redundant -Wall option.

13 years ago* Raise WARNS to 6 and fix all warnings.
Sascha Wildner [Mon, 9 Apr 2007 09:15:48 +0000 (09:15 +0000)]
* Raise WARNS to 6 and fix all warnings.

* Do some style(9) cleanup.

13 years agoRemove obsolete header files.
Sascha Wildner [Sun, 8 Apr 2007 14:56:37 +0000 (14:56 +0000)]
Remove obsolete header files.

13 years agoFix comment: 1000baseTX -> 1000baseT
Sepherosa Ziehau [Sun, 8 Apr 2007 12:03:18 +0000 (12:03 +0000)]
Fix comment: 1000baseTX -> 1000baseT

13 years agoNuke unnecessary NULL node checks.
Sepherosa Ziehau [Sun, 8 Apr 2007 09:43:57 +0000 (09:43 +0000)]
Nuke unnecessary NULL node checks.

13 years agoCode cleanup:
Sepherosa Ziehau [Sun, 8 Apr 2007 09:41:41 +0000 (09:41 +0000)]
Code cleanup:
- Nuke commented out spl*() and function declaration.
- Break long comment lines in rum_ioctl().
- Nuke unnecessary NULL node check in rum_start().

Resource alloc/free fixes and cleanup:
- Fix several resource leakages:
  o  In rum_start(), decrease node refcnt on error handling path.
  o  In rum_stop(), free rum_softc.stats_xfer.
  o  In rum_tx_free_list(), free possible pending TX mbuf.
- In rum_tx_data(), if usbd_transfer() fails, clear rum_tx_data.m and
  rum_tx_data.ni, so later resource free routine will not double free
  them.
- Change the redundant resource free code in rum_detach() into assertion
  to make sure everything are clear.
- In rum_alloc_{tx,rx}_list(), don't call rum_free_{tx,rx}_list, if
  error happens, since caller will do that in rum_stop().

Rest of changes are used to fix following problems:
1) Random system hanging if following script is excuted:
   #!/bin/csh
   while (1)
     ifconfig rum0 up
     ifconfig rum0 down
   end
2) Random system hanging during 'ifconfig rum0 down', if rum(4) is
   attached to uhci/ohci.
3) Promised system hanging if wpa_supplicant(8) is used and killed after
   connection to AP is established, and rum(4) is attached to uhci/ohci.
4) Random serializer recursive assertion, if rum(4) is under heavy load
   and brought down.

- In rum_stop(), turn on RUM_FLAG_STOPPED, so USB transanction will
  not be restarted in rum_rxeof() and rum_stats_timeout() during device
  halting.
- In rum_stop(), release ifnet.if_serializer before aborting RX/TX pipe.
  This make sure serializer will not be recursive held,
  e.g. abort RX pipe -> rum_rxeof().
- Don't turn off TSF sync, when 802.11 state transits to INIT.  Since
  o  Chip will be reset immediately after INIT state transition, so
     turning off TSF sync does not make much sense.
  o  If rum(4) is under heavy RX/TX load, turning off TSF sync will
     stall various USB operations, thus hang the whole system.
- After above change, perform INIT state transition in rum_newstate(),
  so that 802.11 state machine is promised to be halted during detach
  and stop routine.
- Use critical section and RUM_FLAG_CONFIG to protect various USB operation
  sequences, which are not intended to be interfered.

13 years ago* Bring in some relevant changes from FreeBSD.
Sascha Wildner [Sun, 8 Apr 2007 07:05:25 +0000 (07:05 +0000)]
* Bring in some relevant changes from FreeBSD.

* Add some words about bus_setup_intr() and bus_teardown_intr().

* Add a reference to serializer(9).

13 years agoRemove the hostcache code which has been inactive since 1998.
Sascha Wildner [Sat, 7 Apr 2007 21:07:21 +0000 (21:07 +0000)]
Remove the hostcache code which has been inactive since 1998.

13 years agoat_shutdown() is long gone and was replaced with event handlers.
Sascha Wildner [Sat, 7 Apr 2007 20:19:52 +0000 (20:19 +0000)]
at_shutdown() is long gone and was replaced with event handlers.

13 years agoAdd minimal device_get_parent() manpage (device(9) references it).
Sascha Wildner [Sat, 7 Apr 2007 19:43:32 +0000 (19:43 +0000)]
Add minimal device_get_parent() manpage (device(9) references it).

13 years agoFix various forms of .Pa abuse/mistakes.
Sascha Wildner [Sat, 7 Apr 2007 19:29:52 +0000 (19:29 +0000)]
Fix various forms of .Pa abuse/mistakes.

13 years agoUpgrade to libarchive 2.0.28 giving us ar support and a new manpage.
Peter Avalos [Sat, 7 Apr 2007 14:10:27 +0000 (14:10 +0000)]
Upgrade to libarchive 2.0.28 giving us ar support and a new manpage.

13 years agoMerge from vendor branch LIBARCHIVE:
Peter Avalos [Sat, 7 Apr 2007 14:04:55 +0000 (14:04 +0000)]
Merge from vendor branch LIBARCHIVE:
Import libarchive 2.0.28.

13 years agoImport libarchive 2.0.28.
Peter Avalos [Sat, 7 Apr 2007 14:04:55 +0000 (14:04 +0000)]
Import libarchive 2.0.28.

13 years agoRemove unused variable.
Sascha Wildner [Sat, 7 Apr 2007 11:01:06 +0000 (11:01 +0000)]
Remove unused variable.

13 years agoDocument missing multibyte character handling.
Peter Avalos [Fri, 6 Apr 2007 23:42:15 +0000 (23:42 +0000)]
Document missing multibyte character handling.

Obtained-from:  FreeBSD

13 years agoSync with FreeBSD.
Peter Avalos [Fri, 6 Apr 2007 23:36:54 +0000 (23:36 +0000)]
Sync with FreeBSD.

File positions are off_t nowdays, not long, so:
  fseek -> fseeko

Make errmsg a const, so we can just set error messages instead
  of using sprintf/strcpy.

proper parens mean that fd is always set by open(2) [in any part of C],
and so we can accurately check for it returning -1, without feeling like
we need to initialize fd to -1 in its declaration.

Remove some #ifdef sun.

Sprinkle const.

13 years agoUse libcrypto for DES instead of libcipher.
Peter Avalos [Fri, 6 Apr 2007 21:33:28 +0000 (21:33 +0000)]
Use libcrypto for DES instead of libcipher.

Obtained-from:  FreeBSD

13 years agoVOP_BWRITE() was removed in 2006.
Sascha Wildner [Fri, 6 Apr 2007 21:27:06 +0000 (21:27 +0000)]
VOP_BWRITE() was removed in 2006.

13 years agoImprove mdoc a bit and uncomment some references.
Sascha Wildner [Fri, 6 Apr 2007 20:07:41 +0000 (20:07 +0000)]
Improve mdoc a bit and uncomment some references.

13 years agoAdd missing .Pp
Sascha Wildner [Fri, 6 Apr 2007 19:28:12 +0000 (19:28 +0000)]
Add missing .Pp

13 years agoConvert to mdoc.
Sascha Wildner [Fri, 6 Apr 2007 19:25:56 +0000 (19:25 +0000)]
Convert to mdoc.

13 years agoarc4random() returns 0 - 2**32-1, not 2**31-1.
Sascha Wildner [Fri, 6 Apr 2007 06:46:28 +0000 (06:46 +0000)]
arc4random() returns 0 - 2**32-1, not 2**31-1.

13 years agoUpgrade to libarchive 2.0.27 which brings in a few bug fixes by joerg.
Peter Avalos [Thu, 5 Apr 2007 23:07:31 +0000 (23:07 +0000)]
Upgrade to libarchive 2.0.27 which brings in a few bug fixes by joerg.

13 years agoImport libarchive 2.0.27.
Peter Avalos [Thu, 5 Apr 2007 23:02:44 +0000 (23:02 +0000)]
Import libarchive 2.0.27.