sys/gnu/dts/arm/exynos4412-midas.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's Exynos4412 based Trats 2 board device tree source
   4  *
   5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   6  *              http://www.samsung.com
   7  *
   8  * Device tree source file for Samsung's Trats 2 board which is based on
   9  * Samsung's Exynos4412 SoC.
  10  */
  11
  12 /dts-v1/;
  13 #include "exynos4412.dtsi"
  14 #include "exynos4412-ppmu-common.dtsi"
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/input/input.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18 #include <dt-bindings/clock/maxim,max77686.h>
  19 #include <dt-bindings/pinctrl/samsung.h>
  20
  21 / {
  22         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
  23
  24         aliases {
  25                 i2c11 = &i2c_max77693;
  26                 i2c12 = &i2c_max77693_fuel;
  27         };
  28
  29         chosen {
  30                 stdout-path = &serial_2;
  31         };
  32
  33         firmware@204f000 {
  34                 compatible = "samsung,secure-firmware";
  35                 reg = <0x0204F000 0x1000>;
  36         };
  37
  38         fixed-rate-clocks {
  39                 xxti {
  40                         compatible = "samsung,clock-xxti", "fixed-clock";
  41                         clock-frequency = <0>;
  42                 };
  43
  44                 xusbxti {
  45                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  46                         clock-frequency = <24000000>;
  47                 };
  48         };
  49
  50         cam_io_reg: voltage-regulator-1 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "CAM_SENSOR_A";
  53                 regulator-min-microvolt = <2800000>;
  54                 regulator-max-microvolt = <2800000>;
  55                 enable-active-high;
  56                 status = "disabled";
  57         };
  58
  59         cam_af_reg: voltage-regulator-2 {
  60                 compatible = "regulator-fixed";
  61                 regulator-name = "CAM_AF";
  62                 regulator-min-microvolt = <2800000>;
  63                 regulator-max-microvolt = <2800000>;
  64                 enable-active-high;
  65                 status = "disabled";
  66         };
  67
  68         vsil12: voltage-regulator-3 {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "VSIL_1.2V";
  71                 regulator-min-microvolt = <1200000>;
  72                 regulator-max-microvolt = <1200000>;
  73                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  74                 enable-active-high;
  75                 vin-supply = <&buck7_reg>;
  76         };
  77
  78         vcc33mhl: voltage-regulator-4 {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "VCC_3.3_MHL";
  81                 regulator-min-microvolt = <3300000>;
  82                 regulator-max-microvolt = <3300000>;
  83                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  84                 enable-active-high;
  85         };
  86
  87         vcc18mhl: voltage-regulator-5 {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "VCC_1.8_MHL";
  90                 regulator-min-microvolt = <1800000>;
  91                 regulator-max-microvolt = <1800000>;
  92                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94         };
  95
  96         touchkey_reg: voltage-regulator-6 {
  97                 compatible = "regulator-fixed";
  98                 regulator-name = "LED_VDD_3.3V";
  99                 regulator-min-microvolt = <3300000>;
 100                 regulator-max-microvolt = <3300000>;
 101                 enable-active-high;
 102                 status = "disabled";
 103         };
 104
 105         gpio-keys {
 106                 compatible = "gpio-keys";
 107                 pinctrl-names = "default";
 108                 pinctrl-0 = <&gpio_keys>;
 109
 110                 key-down {
 111                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 112                         linux,code = <114>;
 113                         label = "volume down";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-up {
 118                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 119                         linux,code = <115>;
 120                         label = "volume up";
 121                         debounce-interval = <10>;
 122                 };
 123
 124                 key-power {
 125                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 126                         linux,code = <116>;
 127                         label = "power";
 128                         debounce-interval = <10>;
 129                         wakeup-source;
 130                 };
 131
 132                 key-ok {
 133                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 134                         linux,code = <139>;
 135                         label = "ok";
 136                         debounce-interval = <10>;
 137                         wakeup-source;
 138                 };
 139         };
 140
 141         i2c_max77693: i2c-gpio-1 {
 142                 compatible = "i2c-gpio";
 143                 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
 144                 i2c-gpio,delay-us = <2>;
 145                 #address-cells = <1>;
 146                 #size-cells = <0>;
 147                 status = "okay";
 148
 149                 max77693@66 {
 150                         compatible = "maxim,max77693";
 151                         interrupt-parent = <&gpx1>;
 152                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 153                         pinctrl-names = "default";
 154                         pinctrl-0 = <&max77693_irq>;
 155                         reg = <0x66>;
 156
 157                         regulators {
 158                                 esafeout1_reg: ESAFEOUT1 {
 159                                         regulator-name = "ESAFEOUT1";
 160                                 };
 161                                 esafeout2_reg: ESAFEOUT2 {
 162                                         regulator-name = "ESAFEOUT2";
 163                                 };
 164                                 charger_reg: CHARGER {
 165                                         regulator-name = "CHARGER";
 166                                         regulator-min-microamp = <60000>;
 167                                         regulator-max-microamp = <2580000>;
 168                                 };
 169                         };
 170
 171                         max77693_haptic {
 172                                 compatible = "maxim,max77693-haptic";
 173                                 haptic-supply = <&ldo26_reg>;
 174                                 pwms = <&pwm 0 38022 0>;
 175                         };
 176
 177                         charger {
 178                                 compatible = "maxim,max77693-charger";
 179
 180                                 maxim,constant-microvolt = <4350000>;
 181                                 maxim,min-system-microvolt = <3600000>;
 182                                 maxim,thermal-regulation-celsius = <100>;
 183                                 maxim,battery-overcurrent-microamp = <3500000>;
 184                                 maxim,charge-input-threshold-microvolt = <4300000>;
 185                         };
 186                 };
 187         };
 188
 189         i2c_max77693_fuel: i2c-gpio-3 {
 190                 compatible = "i2c-gpio";
 191                 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
 192                 i2c-gpio,delay-us = <2>;
 193                 #address-cells = <1>;
 194                 #size-cells = <0>;
 195                 status = "okay";
 196
 197                 max77693-fuel-gauge@36 {
 198                         compatible = "maxim,max17047";
 199                         interrupt-parent = <&gpx2>;
 200                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 201                         pinctrl-names = "default";
 202                         pinctrl-0 = <&max77693_fuel_irq>;
 203                         reg = <0x36>;
 204
 205                         maxim,over-heat-temp = <700>;
 206                         maxim,over-volt = <4500>;
 207                 };
 208         };
 209
 210         i2c-gpio-4 {
 211                 compatible = "i2c-gpio";
 212                 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 213                 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 214                 i2c-gpio,delay-us = <2>;
 215                 #address-cells = <1>;
 216                 #size-cells = <0>;
 217
 218                 touchkey@20 {
 219                         compatible = "cypress,midas-touchkey";
 220                         reg = <0x20>;
 221                         vdd-supply = <&touchkey_reg>;
 222                         vcc-supply = <&ldo5_reg>;
 223                         interrupt-parent = <&gpj0>;
 224                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 225                         linux,keycodes = <KEY_BACK KEY_MENU>;
 226                 };
 227         };
 228
 229         i2c-mhl {
 230                 compatible = "i2c-gpio";
 231                 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
 232                 i2c-gpio,delay-us = <100>;
 233                 #address-cells = <1>;
 234                 #size-cells = <0>;
 235
 236                 pinctrl-0 = <&i2c_mhl_bus>;
 237                 pinctrl-names = "default";
 238                 status = "okay";
 239
 240                 sii9234: hdmi-bridge@39 {
 241                         compatible = "sil,sii9234";
 242                         avcc33-supply = <&vcc33mhl>;
 243                         iovcc18-supply = <&vcc18mhl>;
 244                         avcc12-supply = <&vsil12>;
 245                         cvcc12-supply = <&vsil12>;
 246                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 247                         interrupt-parent = <&gpf3>;
 248                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 249                         reg = <0x39>;
 250
 251                         port {
 252                                 mhl_to_hdmi: endpoint {
 253                                         remote-endpoint = <&hdmi_to_mhl>;
 254                                 };
 255                         };
 256                 };
 257         };
 258
 259         wlan_pwrseq: sdhci3-pwrseq {
 260                 compatible = "mmc-pwrseq-simple";
 261                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
 262                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 263                 clock-names = "ext_clock";
 264         };
 265
 266         sound {
 267                 compatible = "samsung,trats2-audio";
 268                 samsung,i2s-controller = <&i2s0>;
 269                 samsung,model = "Trats2";
 270                 samsung,audio-codec = <&wm1811>;
 271                 samsung,audio-routing =
 272                         "SPK", "SPKOUTLN",
 273                         "SPK", "SPKOUTLP",
 274                         "SPK", "SPKOUTRN",
 275                         "SPK", "SPKOUTRP";
 276         };
 277
 278         thermistor-ap {
 279                 compatible = "murata,ncp15wb473";
 280                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 281                 pullup-ohm = <100000>;   /* 100K */
 282                 pulldown-ohm = <100000>; /* 100K */
 283                 io-channels = <&adc 1>;  /* AP temperature */
 284         };
 285
 286         thermistor-battery {
 287                 compatible = "murata,ncp15wb473";
 288                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 289                 pullup-ohm = <100000>;   /* 100K */
 290                 pulldown-ohm = <100000>; /* 100K */
 291                 io-channels = <&adc 2>;  /* Battery temperature */
 292         };
 293
 294         thermal-zones {
 295                 cpu_thermal: cpu-thermal {
 296                         cooling-maps {
 297                                 map0 {
 298                                      /* Corresponds to 800MHz at freq_table */
 299                                      cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
 300                                                       <&cpu2 7 7>, <&cpu3 7 7>;
 301                                 };
 302                                 map1 {
 303                                      /* Corresponds to 200MHz at freq_table */
 304                                      cooling-device = <&cpu0 13 13>,
 305                                                       <&cpu1 13 13>,
 306                                                       <&cpu2 13 13>,
 307                                                       <&cpu3 13 13>;
 308                                };
 309                        };
 310                 };
 311         };
 312 };
 313
 314 &adc {
 315         vdd-supply = <&ldo3_reg>;
 316         status = "okay";
 317 };
 318
 319 &bus_dmc {
 320         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 321         vdd-supply = <&buck1_reg>;
 322         status = "okay";
 323 };
 324
 325 &bus_acp {
 326         devfreq = <&bus_dmc>;
 327         status = "okay";
 328 };
 329
 330 &bus_c2c {
 331         devfreq = <&bus_dmc>;
 332         status = "okay";
 333 };
 334
 335 &bus_leftbus {
 336         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 337         vdd-supply = <&buck3_reg>;
 338         status = "okay";
 339 };
 340
 341 &bus_rightbus {
 342         devfreq = <&bus_leftbus>;
 343         status = "okay";
 344 };
 345
 346 &bus_display {
 347         devfreq = <&bus_leftbus>;
 348         status = "okay";
 349 };
 350
 351 &bus_fsys {
 352         devfreq = <&bus_leftbus>;
 353         status = "okay";
 354 };
 355
 356 &bus_peri {
 357         devfreq = <&bus_leftbus>;
 358         status = "okay";
 359 };
 360
 361 &bus_mfc {
 362         devfreq = <&bus_leftbus>;
 363         status = "okay";
 364 };
 365
 366 &camera {
 367         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 368         pinctrl-names = "default";
 369         status = "okay";
 370         assigned-clocks = <&clock CLK_MOUT_CAM0>,
 371                 <&clock CLK_MOUT_CAM1>;
 372         assigned-clock-parents = <&clock CLK_XUSBXTI>,
 373                 <&clock CLK_XUSBXTI>;
 374 };
 375
 376 &cpu0 {
 377         cpu0-supply = <&buck2_reg>;
 378 };
 379
 380 &csis_0 {
 381         status = "okay";
 382         vddcore-supply = <&ldo8_reg>;
 383         vddio-supply = <&ldo10_reg>;
 384         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 385                         <&clock CLK_SCLK_CSIS0>;
 386         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 387         assigned-clock-rates = <0>, <176000000>;
 388
 389         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 390         port@3 {
 391                 reg = <3>;
 392                 csis0_ep: endpoint {
 393                         remote-endpoint = <&s5c73m3_ep>;
 394                         data-lanes = <1 2 3 4>;
 395                         samsung,csis-hs-settle = <12>;
 396                 };
 397         };
 398 };
 399
 400 &csis_1 {
 401         status = "okay";
 402         vddcore-supply = <&ldo8_reg>;
 403         vddio-supply = <&ldo10_reg>;
 404         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 405                         <&clock CLK_SCLK_CSIS1>;
 406         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 407         assigned-clock-rates = <0>, <176000000>;
 408
 409         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 410         port@4 {
 411                 reg = <4>;
 412                 csis1_ep: endpoint {
 413                         remote-endpoint = <&is_s5k6a3_ep>;
 414                         data-lanes = <1>;
 415                         samsung,csis-hs-settle = <18>;
 416                         samsung,csis-wclk;
 417                 };
 418         };
 419 };
 420
 421 &dsi_0 {
 422         vddcore-supply = <&ldo8_reg>;
 423         vddio-supply = <&ldo10_reg>;
 424         samsung,burst-clock-frequency = <500000000>;
 425         samsung,esc-clock-frequency = <20000000>;
 426         samsung,pll-clock-frequency = <24000000>;
 427 };
 428
 429 &exynos_usbphy {
 430         vbus-supply = <&esafeout1_reg>;
 431         status = "okay";
 432 };
 433
 434 &fimc_0 {
 435         status = "okay";
 436         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 437                         <&clock CLK_SCLK_FIMC0>;
 438         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 439         assigned-clock-rates = <0>, <176000000>;
 440 };
 441
 442 &fimc_1 {
 443         status = "okay";
 444         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 445                         <&clock CLK_SCLK_FIMC1>;
 446         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 447         assigned-clock-rates = <0>, <176000000>;
 448 };
 449
 450 &fimc_2 {
 451         status = "okay";
 452         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 453                         <&clock CLK_SCLK_FIMC2>;
 454         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 455         assigned-clock-rates = <0>, <176000000>;
 456 };
 457
 458 &fimc_3 {
 459         status = "okay";
 460         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 461                         <&clock CLK_SCLK_FIMC3>;
 462         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 463         assigned-clock-rates = <0>, <176000000>;
 464 };
 465
 466 &fimc_is {
 467         pinctrl-0 = <&fimc_is_uart>;
 468         pinctrl-names = "default";
 469         status = "okay";
 470
 471         };
 472
 473 &fimc_lite_0 {
 474         status = "okay";
 475 };
 476
 477 &fimc_lite_1 {
 478         status = "okay";
 479 };
 480
 481 &fimd {
 482         status = "okay";
 483 };
 484
 485 &gpu {
 486         mali-supply = <&buck4_reg>;
 487         status = "okay";
 488 };
 489
 490 &hdmi {
 491         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 492         pinctrl-names = "default";
 493         pinctrl-0 = <&hdmi_hpd>;
 494         vdd-supply = <&ldo3_reg>;
 495         vdd_osc-supply = <&ldo4_reg>;
 496         vdd_pll-supply = <&ldo3_reg>;
 497         ddc = <&i2c_5>;
 498         status = "okay";
 499
 500         ports {
 501                 #address-cells = <1>;
 502                 #size-cells = <0>;
 503
 504                 port@1 {
 505                         reg = <1>;
 506                         hdmi_to_mhl: endpoint {
 507                                 remote-endpoint = <&mhl_to_hdmi>;
 508                         };
 509                 };
 510         };
 511 };
 512
 513 &hsotg {
 514         vusb_d-supply = <&ldo15_reg>;
 515         vusb_a-supply = <&ldo12_reg>;
 516         dr_mode = "peripheral";
 517         status = "okay";
 518 };
 519
 520 &i2c_0 {
 521         samsung,i2c-sda-delay = <100>;
 522         samsung,i2c-slave-addr = <0x10>;
 523         samsung,i2c-max-bus-freq = <400000>;
 524         pinctrl-0 = <&i2c0_bus>;
 525         pinctrl-names = "default";
 526         status = "okay";
 527
 528         s5c73m3: s5c73m3@3c {
 529                 compatible = "samsung,s5c73m3";
 530                 reg = <0x3c>;
 531                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 532                 vdd-int-supply = <&buck9_reg>;
 533                 vddio-cis-supply = <&ldo9_reg>;
 534                 vddio-host-supply = <&ldo18_reg>;
 535                 vdd-af-supply = <&cam_af_reg>;
 536                 vdd-reg-supply = <&cam_io_reg>;
 537                 clock-frequency = <24000000>;
 538                 /* CAM_A_CLKOUT */
 539                 clocks = <&camera 0>;
 540                 clock-names = "cis_extclk";
 541                 status = "disabled";
 542                 port {
 543                         s5c73m3_ep: endpoint {
 544                                 remote-endpoint = <&csis0_ep>;
 545                                 data-lanes = <1 2 3 4>;
 546                         };
 547                 };
 548         };
 549 };
 550
 551 &i2c1_isp {
 552         pinctrl-0 = <&fimc_is_i2c1>;
 553         pinctrl-names = "default";
 554
 555         s5k6a3@10 {
 556                 compatible = "samsung,s5k6a3";
 557                 reg = <0x10>;
 558                 svdda-supply = <&cam_io_reg>;
 559                 svddio-supply = <&ldo19_reg>;
 560                 afvdd-supply = <&ldo19_reg>;
 561                 clock-frequency = <24000000>;
 562                 /* CAM_B_CLKOUT */
 563                 clocks = <&camera 1>;
 564                 clock-names = "extclk";
 565                 samsung,camclk-out = <1>;
 566                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 567
 568                 port {
 569                         is_s5k6a3_ep: endpoint {
 570                                 remote-endpoint = <&csis1_ep>;
 571                                 data-lanes = <1>;
 572                         };
 573                 };
 574         };
 575 };
 576
 577 &i2c_3 {
 578         samsung,i2c-sda-delay = <100>;
 579         samsung,i2c-slave-addr = <0x10>;
 580         samsung,i2c-max-bus-freq = <400000>;
 581         pinctrl-0 = <&i2c3_bus>;
 582         pinctrl-names = "default";
 583         status = "okay";
 584 };
 585
 586 &i2c_4 {
 587         samsung,i2c-sda-delay = <100>;
 588         samsung,i2c-slave-addr = <0x10>;
 589         samsung,i2c-max-bus-freq = <100000>;
 590         pinctrl-0 = <&i2c4_bus>;
 591         pinctrl-names = "default";
 592         status = "okay";
 593
 594         wm1811: wm1811@1a {
 595                 compatible = "wlf,wm1811";
 596                 reg = <0x1a>;
 597                 clocks = <&pmu_system_controller 0>;
 598                 clock-names = "MCLK1";
 599                 DCVDD-supply = <&ldo3_reg>;
 600                 DBVDD1-supply = <&ldo3_reg>;
 601                 wlf,ldo1ena = <&gpj0 4 0>;
 602         };
 603 };
 604
 605 &i2c_5 {
 606         status = "okay";
 607 };
 608
 609 &i2c_7 {
 610         samsung,i2c-sda-delay = <100>;
 611         samsung,i2c-slave-addr = <0x10>;
 612         samsung,i2c-max-bus-freq = <100000>;
 613         pinctrl-0 = <&i2c7_bus>;
 614         pinctrl-names = "default";
 615         status = "okay";
 616
 617         max77686: max77686_pmic@9 {
 618                 compatible = "maxim,max77686";
 619                 interrupt-parent = <&gpx0>;
 620                 interrupts = <7 IRQ_TYPE_NONE>;
 621                 pinctrl-0 = <&max77686_irq>;
 622                 pinctrl-names = "default";
 623                 reg = <0x09>;
 624                 #clock-cells = <1>;
 625
 626                 voltage-regulators {
 627                         ldo1_reg: LDO1 {
 628                                 regulator-name = "VALIVE_1.0V_AP";
 629                                 regulator-min-microvolt = <1000000>;
 630                                 regulator-max-microvolt = <1000000>;
 631                                 regulator-always-on;
 632                         };
 633
 634                         ldo2_reg: LDO2 {
 635                                 regulator-name = "VM1M2_1.2V_AP";
 636                                 regulator-min-microvolt = <1200000>;
 637                                 regulator-max-microvolt = <1200000>;
 638                                 regulator-always-on;
 639                                 regulator-state-mem {
 640                                         regulator-on-in-suspend;
 641                                 };
 642                         };
 643
 644                         ldo3_reg: LDO3 {
 645                                 regulator-name = "VCC_1.8V_AP";
 646                                 regulator-min-microvolt = <1800000>;
 647                                 regulator-max-microvolt = <1800000>;
 648                                 regulator-always-on;
 649                         };
 650
 651                         ldo4_reg: LDO4 {
 652                                 regulator-name = "VCC_2.8V_AP";
 653                                 regulator-min-microvolt = <2800000>;
 654                                 regulator-max-microvolt = <2800000>;
 655                                 regulator-always-on;
 656                         };
 657
 658                         ldo5_reg: LDO5 {
 659                                 regulator-name = "VCC_1.8V_IO";
 660                                 regulator-min-microvolt = <1800000>;
 661                                 regulator-max-microvolt = <1800000>;
 662                                 regulator-always-on;
 663                         };
 664
 665                         ldo6_reg: LDO6 {
 666                                 regulator-name = "VMPLL_1.0V_AP";
 667                                 regulator-min-microvolt = <1000000>;
 668                                 regulator-max-microvolt = <1000000>;
 669                                 regulator-always-on;
 670                                 regulator-state-mem {
 671                                         regulator-on-in-suspend;
 672                                 };
 673                         };
 674
 675                         ldo7_reg: LDO7 {
 676                                 regulator-name = "VPLL_1.0V_AP";
 677                                 regulator-min-microvolt = <1000000>;
 678                                 regulator-max-microvolt = <1000000>;
 679                                 regulator-always-on;
 680                                 regulator-state-mem {
 681                                         regulator-on-in-suspend;
 682                                 };
 683                         };
 684
 685                         ldo8_reg: LDO8 {
 686                                 regulator-name = "VMIPI_1.0V";
 687                                 regulator-min-microvolt = <1000000>;
 688                                 regulator-max-microvolt = <1000000>;
 689                                 regulator-state-mem {
 690                                         regulator-off-in-suspend;
 691                                 };
 692                         };
 693
 694                         ldo9_reg: LDO9 {
 695                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 696                                 regulator-min-microvolt = <1200000>;
 697                                 regulator-max-microvolt = <1200000>;
 698                         };
 699
 700                         ldo10_reg: LDO10 {
 701                                 regulator-name = "VMIPI_1.8V";
 702                                 regulator-min-microvolt = <1800000>;
 703                                 regulator-max-microvolt = <1800000>;
 704                                 regulator-state-mem {
 705                                         regulator-off-in-suspend;
 706                                 };
 707                         };
 708
 709                         ldo11_reg: LDO11 {
 710                                 regulator-name = "VABB1_1.95V";
 711                                 regulator-min-microvolt = <1950000>;
 712                                 regulator-max-microvolt = <1950000>;
 713                                 regulator-always-on;
 714                                 regulator-state-mem {
 715                                         regulator-off-in-suspend;
 716                                 };
 717                         };
 718
 719                         ldo12_reg: LDO12 {
 720                                 regulator-name = "VUOTG_3.0V";
 721                                 regulator-min-microvolt = <3000000>;
 722                                 regulator-max-microvolt = <3000000>;
 723                                 regulator-state-mem {
 724                                         regulator-off-in-suspend;
 725                                 };
 726                         };
 727
 728                         ldo13_reg: LDO13 {
 729                                 regulator-name = "NFC_AVDD_1.8V";
 730                                 regulator-min-microvolt = <1800000>;
 731                                 regulator-max-microvolt = <1800000>;
 732                         };
 733
 734                         ldo14_reg: LDO14 {
 735                                 regulator-name = "VABB2_1.95V";
 736                                 regulator-min-microvolt = <1950000>;
 737                                 regulator-max-microvolt = <1950000>;
 738                                 regulator-always-on;
 739                                 regulator-state-mem {
 740                                         regulator-off-in-suspend;
 741                                 };
 742                         };
 743
 744                         ldo15_reg: LDO15 {
 745                                 regulator-name = "VHSIC_1.0V";
 746                                 regulator-min-microvolt = <1000000>;
 747                                 regulator-max-microvolt = <1000000>;
 748                                 regulator-state-mem {
 749                                         regulator-on-in-suspend;
 750                                 };
 751                         };
 752
 753                         ldo16_reg: LDO16 {
 754                                 regulator-name = "VHSIC_1.8V";
 755                                 regulator-min-microvolt = <1800000>;
 756                                 regulator-max-microvolt = <1800000>;
 757                                 regulator-state-mem {
 758                                         regulator-on-in-suspend;
 759                                 };
 760                         };
 761
 762                         ldo17_reg: LDO17 {
 763                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 764                                 regulator-min-microvolt = <1200000>;
 765                                 regulator-max-microvolt = <1200000>;
 766                         };
 767
 768                         ldo18_reg: LDO18 {
 769                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 770                                 regulator-min-microvolt = <1800000>;
 771                                 regulator-max-microvolt = <1800000>;
 772                         };
 773
 774                         ldo19_reg: LDO19 {
 775                                 regulator-name = "VT_CAM_1.8V";
 776                                 regulator-min-microvolt = <1800000>;
 777                                 regulator-max-microvolt = <1800000>;
 778                         };
 779
 780                         ldo20_reg: LDO20 {
 781                                 regulator-name = "VDDQ_PRE_1.8V";
 782                                 regulator-min-microvolt = <1800000>;
 783                                 regulator-max-microvolt = <1800000>;
 784                         };
 785
 786                         ldo21_reg: LDO21 {
 787                                 regulator-name = "VTF_2.8V";
 788                                 regulator-min-microvolt = <2800000>;
 789                                 regulator-max-microvolt = <2800000>;
 790                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 791                         };
 792
 793                         ldo22_reg: LDO22 {
 794                                 regulator-name = "VMEM_VDD_2.8V";
 795                                 regulator-min-microvolt = <2800000>;
 796                                 regulator-max-microvolt = <2800000>;
 797                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 798                         };
 799
 800                         ldo23_reg: LDO23 {
 801                                 regulator-name = "TSP_AVDD_3.3V";
 802                                 regulator-min-microvolt = <3300000>;
 803                                 regulator-max-microvolt = <3300000>;
 804                         };
 805
 806                         ldo24_reg: LDO24 {
 807                                 regulator-name = "TSP_VDD_1.8V";
 808                                 regulator-min-microvolt = <1800000>;
 809                                 regulator-max-microvolt = <1800000>;
 810                         };
 811
 812                         ldo25_reg: LDO25 {
 813                                 regulator-name = "LDO25";
 814                         };
 815
 816                         ldo26_reg: LDO26 {
 817                                 regulator-name = "MOTOR_VCC_3.0V";
 818                                 regulator-min-microvolt = <3000000>;
 819                                 regulator-max-microvolt = <3000000>;
 820                         };
 821
 822                         buck1_reg: BUCK1 {
 823                                 regulator-name = "vdd_mif";
 824                                 regulator-min-microvolt = <850000>;
 825                                 regulator-max-microvolt = <1100000>;
 826                                 regulator-always-on;
 827                                 regulator-boot-on;
 828                                 regulator-state-mem {
 829                                         regulator-off-in-suspend;
 830                                 };
 831                         };
 832
 833                         buck2_reg: BUCK2 {
 834                                 regulator-name = "vdd_arm";
 835                                 regulator-min-microvolt = <850000>;
 836                                 regulator-max-microvolt = <1500000>;
 837                                 regulator-always-on;
 838                                 regulator-boot-on;
 839                                 regulator-state-mem {
 840                                         regulator-on-in-suspend;
 841                                 };
 842                         };
 843
 844                         buck3_reg: BUCK3 {
 845                                 regulator-name = "vdd_int";
 846                                 regulator-min-microvolt = <850000>;
 847                                 regulator-max-microvolt = <1150000>;
 848                                 regulator-always-on;
 849                                 regulator-boot-on;
 850                                 regulator-state-mem {
 851                                         regulator-off-in-suspend;
 852                                 };
 853                         };
 854
 855                         buck4_reg: BUCK4 {
 856                                 regulator-name = "vdd_g3d";
 857                                 regulator-min-microvolt = <850000>;
 858                                 regulator-max-microvolt = <1150000>;
 859                                 regulator-boot-on;
 860                                 regulator-state-mem {
 861                                         regulator-off-in-suspend;
 862                                 };
 863                         };
 864
 865                         buck5_reg: BUCK5 {
 866                                 regulator-name = "VMEM_1.2V_AP";
 867                                 regulator-min-microvolt = <1200000>;
 868                                 regulator-max-microvolt = <1200000>;
 869                                 regulator-always-on;
 870                         };
 871
 872                         buck6_reg: BUCK6 {
 873                                 regulator-name = "VCC_SUB_1.35V";
 874                                 regulator-min-microvolt = <1350000>;
 875                                 regulator-max-microvolt = <1350000>;
 876                                 regulator-always-on;
 877                         };
 878
 879                         buck7_reg: BUCK7 {
 880                                 regulator-name = "VCC_SUB_2.0V";
 881                                 regulator-min-microvolt = <2000000>;
 882                                 regulator-max-microvolt = <2000000>;
 883                                 regulator-always-on;
 884                         };
 885
 886                         buck8_reg: BUCK8 {
 887                                 regulator-name = "VMEM_VDDF_3.0V";
 888                                 regulator-min-microvolt = <2850000>;
 889                                 regulator-max-microvolt = <2850000>;
 890                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 891                         };
 892
 893                         buck9_reg: BUCK9 {
 894                                 regulator-name = "CAM_ISP_CORE_1.2V";
 895                                 regulator-min-microvolt = <1000000>;
 896                                 regulator-max-microvolt = <1200000>;
 897                         };
 898                 };
 899         };
 900 };
 901
 902 &i2c_8 {
 903         status = "okay";
 904 };
 905
 906 &i2s0 {
 907         pinctrl-0 = <&i2s0_bus>;
 908         pinctrl-names = "default";
 909         status = "okay";
 910 };
 911
 912 &mixer {
 913         status = "okay";
 914 };
 915
 916 &mshc_0 {
 917         broken-cd;
 918         non-removable;
 919         card-detect-delay = <200>;
 920         vmmc-supply = <&ldo22_reg>;
 921         clock-frequency = <400000000>;
 922         samsung,dw-mshc-ciu-div = <0>;
 923         samsung,dw-mshc-sdr-timing = <2 3>;
 924         samsung,dw-mshc-ddr-timing = <1 2>;
 925         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 926         pinctrl-names = "default";
 927         status = "okay";
 928         bus-width = <8>;
 929         cap-mmc-highspeed;
 930 };
 931
 932 &pmu_system_controller {
 933         assigned-clocks = <&pmu_system_controller 0>;
 934         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 935 };
 936
 937 &pinctrl_0 {
 938         pinctrl-names = "default";
 939         pinctrl-0 = <&sleep0>;
 940
 941         mhl_int: mhl-int {
 942                 samsung,pins = "gpf3-5";
 943                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 944         };
 945
 946         i2c_mhl_bus: i2c-mhl-bus {
 947                 samsung,pins = "gpf0-4", "gpf0-6";
 948                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 949                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 950                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 951         };
 952
 953         sleep0: sleep-states {
 954                 PIN_SLP(gpa0-0, INPUT, NONE);
 955                 PIN_SLP(gpa0-1, OUT0, NONE);
 956                 PIN_SLP(gpa0-2, INPUT, NONE);
 957                 PIN_SLP(gpa0-3, INPUT, UP);
 958                 PIN_SLP(gpa0-4, INPUT, NONE);
 959                 PIN_SLP(gpa0-5, INPUT, DOWN);
 960                 PIN_SLP(gpa0-6, INPUT, DOWN);
 961                 PIN_SLP(gpa0-7, INPUT, UP);
 962
 963                 PIN_SLP(gpa1-0, INPUT, DOWN);
 964                 PIN_SLP(gpa1-1, INPUT, DOWN);
 965                 PIN_SLP(gpa1-2, INPUT, DOWN);
 966                 PIN_SLP(gpa1-3, INPUT, DOWN);
 967                 PIN_SLP(gpa1-4, INPUT, DOWN);
 968                 PIN_SLP(gpa1-5, INPUT, DOWN);
 969
 970                 PIN_SLP(gpb-0, INPUT, NONE);
 971                 PIN_SLP(gpb-1, INPUT, NONE);
 972                 PIN_SLP(gpb-2, INPUT, NONE);
 973                 PIN_SLP(gpb-3, INPUT, NONE);
 974                 PIN_SLP(gpb-4, INPUT, DOWN);
 975                 PIN_SLP(gpb-5, INPUT, UP);
 976                 PIN_SLP(gpb-6, INPUT, DOWN);
 977                 PIN_SLP(gpb-7, INPUT, DOWN);
 978
 979                 PIN_SLP(gpc0-0, INPUT, DOWN);
 980                 PIN_SLP(gpc0-1, INPUT, DOWN);
 981                 PIN_SLP(gpc0-2, INPUT, DOWN);
 982                 PIN_SLP(gpc0-3, INPUT, DOWN);
 983                 PIN_SLP(gpc0-4, INPUT, DOWN);
 984
 985                 PIN_SLP(gpc1-0, INPUT, NONE);
 986                 PIN_SLP(gpc1-1, PREV, NONE);
 987                 PIN_SLP(gpc1-2, INPUT, NONE);
 988                 PIN_SLP(gpc1-3, INPUT, NONE);
 989                 PIN_SLP(gpc1-4, INPUT, NONE);
 990
 991                 PIN_SLP(gpd0-0, INPUT, DOWN);
 992                 PIN_SLP(gpd0-1, INPUT, DOWN);
 993                 PIN_SLP(gpd0-2, INPUT, NONE);
 994                 PIN_SLP(gpd0-3, INPUT, NONE);
 995
 996                 PIN_SLP(gpd1-0, INPUT, DOWN);
 997                 PIN_SLP(gpd1-1, INPUT, DOWN);
 998                 PIN_SLP(gpd1-2, INPUT, NONE);
 999                 PIN_SLP(gpd1-3, INPUT, NONE);
1000
1001                 PIN_SLP(gpf0-0, INPUT, NONE);
1002                 PIN_SLP(gpf0-1, INPUT, NONE);
1003                 PIN_SLP(gpf0-2, INPUT, DOWN);
1004                 PIN_SLP(gpf0-3, INPUT, DOWN);
1005                 PIN_SLP(gpf0-4, INPUT, NONE);
1006                 PIN_SLP(gpf0-5, INPUT, DOWN);
1007                 PIN_SLP(gpf0-6, INPUT, NONE);
1008                 PIN_SLP(gpf0-7, INPUT, DOWN);
1009
1010                 PIN_SLP(gpf1-0, INPUT, DOWN);
1011                 PIN_SLP(gpf1-1, INPUT, DOWN);
1012                 PIN_SLP(gpf1-2, INPUT, DOWN);
1013                 PIN_SLP(gpf1-3, INPUT, DOWN);
1014                 PIN_SLP(gpf1-4, INPUT, NONE);
1015                 PIN_SLP(gpf1-5, INPUT, NONE);
1016                 PIN_SLP(gpf1-6, INPUT, DOWN);
1017                 PIN_SLP(gpf1-7, PREV, NONE);
1018
1019                 PIN_SLP(gpf2-0, PREV, NONE);
1020                 PIN_SLP(gpf2-1, INPUT, DOWN);
1021                 PIN_SLP(gpf2-2, INPUT, DOWN);
1022                 PIN_SLP(gpf2-3, INPUT, DOWN);
1023                 PIN_SLP(gpf2-4, INPUT, DOWN);
1024                 PIN_SLP(gpf2-5, INPUT, DOWN);
1025                 PIN_SLP(gpf2-6, INPUT, NONE);
1026                 PIN_SLP(gpf2-7, INPUT, NONE);
1027
1028                 PIN_SLP(gpf3-0, INPUT, NONE);
1029                 PIN_SLP(gpf3-1, PREV, NONE);
1030                 PIN_SLP(gpf3-2, PREV, NONE);
1031                 PIN_SLP(gpf3-3, PREV, NONE);
1032                 PIN_SLP(gpf3-4, OUT1, NONE);
1033                 PIN_SLP(gpf3-5, INPUT, DOWN);
1034
1035                 PIN_SLP(gpj0-0, PREV, NONE);
1036                 PIN_SLP(gpj0-1, PREV, NONE);
1037                 PIN_SLP(gpj0-2, PREV, NONE);
1038                 PIN_SLP(gpj0-3, INPUT, DOWN);
1039                 PIN_SLP(gpj0-4, PREV, NONE);
1040                 PIN_SLP(gpj0-5, PREV, NONE);
1041                 PIN_SLP(gpj0-6, INPUT, DOWN);
1042                 PIN_SLP(gpj0-7, INPUT, DOWN);
1043
1044                 PIN_SLP(gpj1-0, INPUT, DOWN);
1045                 PIN_SLP(gpj1-1, PREV, NONE);
1046                 PIN_SLP(gpj1-2, PREV, NONE);
1047                 PIN_SLP(gpj1-3, INPUT, DOWN);
1048                 PIN_SLP(gpj1-4, INPUT, DOWN);
1049         };
1050 };
1051
1052 &pinctrl_1 {
1053         pinctrl-names = "default";
1054         pinctrl-0 = <&sleep1>;
1055
1056         gpio_keys: gpio-keys {
1057                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1058                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1059         };
1060
1061         max77686_irq: max77686-irq {
1062                 samsung,pins = "gpx0-7";
1063                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1064         };
1065
1066         max77693_irq: max77693-irq {
1067                 samsung,pins = "gpx1-5";
1068                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1069         };
1070
1071         max77693_fuel_irq: max77693-fuel-irq {
1072                 samsung,pins = "gpx2-3";
1073                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1074         };
1075
1076         sdhci2_cd: sdhci2-cd-irq {
1077                 samsung,pins = "gpx3-4";
1078                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1079         };
1080
1081         hdmi_hpd: hdmi-hpd {
1082                 samsung,pins = "gpx3-7";
1083                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1084         };
1085
1086         sleep1: sleep-states {
1087                 PIN_SLP(gpk0-0, PREV, NONE);
1088                 PIN_SLP(gpk0-1, PREV, NONE);
1089                 PIN_SLP(gpk0-2, OUT0, NONE);
1090                 PIN_SLP(gpk0-3, PREV, NONE);
1091                 PIN_SLP(gpk0-4, PREV, NONE);
1092                 PIN_SLP(gpk0-5, PREV, NONE);
1093                 PIN_SLP(gpk0-6, PREV, NONE);
1094
1095                 PIN_SLP(gpk1-0, INPUT, DOWN);
1096                 PIN_SLP(gpk1-1, INPUT, DOWN);
1097                 PIN_SLP(gpk1-2, INPUT, DOWN);
1098                 PIN_SLP(gpk1-3, PREV, NONE);
1099                 PIN_SLP(gpk1-4, PREV, NONE);
1100                 PIN_SLP(gpk1-5, PREV, NONE);
1101                 PIN_SLP(gpk1-6, PREV, NONE);
1102
1103                 PIN_SLP(gpk2-0, INPUT, DOWN);
1104                 PIN_SLP(gpk2-1, INPUT, DOWN);
1105                 PIN_SLP(gpk2-2, INPUT, DOWN);
1106                 PIN_SLP(gpk2-3, INPUT, DOWN);
1107                 PIN_SLP(gpk2-4, INPUT, DOWN);
1108                 PIN_SLP(gpk2-5, INPUT, DOWN);
1109                 PIN_SLP(gpk2-6, INPUT, DOWN);
1110
1111                 PIN_SLP(gpk3-0, OUT0, NONE);
1112                 PIN_SLP(gpk3-1, INPUT, NONE);
1113                 PIN_SLP(gpk3-2, INPUT, DOWN);
1114                 PIN_SLP(gpk3-3, INPUT, NONE);
1115                 PIN_SLP(gpk3-4, INPUT, NONE);
1116                 PIN_SLP(gpk3-5, INPUT, NONE);
1117                 PIN_SLP(gpk3-6, INPUT, NONE);
1118
1119                 PIN_SLP(gpl0-0, INPUT, DOWN);
1120                 PIN_SLP(gpl0-1, INPUT, DOWN);
1121                 PIN_SLP(gpl0-2, INPUT, DOWN);
1122                 PIN_SLP(gpl0-3, INPUT, DOWN);
1123                 PIN_SLP(gpl0-4, PREV, NONE);
1124                 PIN_SLP(gpl0-6, PREV, NONE);
1125
1126                 PIN_SLP(gpl1-0, INPUT, DOWN);
1127                 PIN_SLP(gpl1-1, INPUT, DOWN);
1128                 PIN_SLP(gpl2-0, INPUT, DOWN);
1129                 PIN_SLP(gpl2-1, INPUT, DOWN);
1130                 PIN_SLP(gpl2-2, INPUT, DOWN);
1131                 PIN_SLP(gpl2-3, INPUT, DOWN);
1132                 PIN_SLP(gpl2-4, INPUT, DOWN);
1133                 PIN_SLP(gpl2-5, INPUT, DOWN);
1134                 PIN_SLP(gpl2-6, PREV, NONE);
1135                 PIN_SLP(gpl2-7, INPUT, DOWN);
1136
1137                 PIN_SLP(gpm0-0, INPUT, DOWN);
1138                 PIN_SLP(gpm0-1, INPUT, DOWN);
1139                 PIN_SLP(gpm0-2, INPUT, DOWN);
1140                 PIN_SLP(gpm0-3, INPUT, DOWN);
1141                 PIN_SLP(gpm0-4, INPUT, DOWN);
1142                 PIN_SLP(gpm0-5, INPUT, DOWN);
1143                 PIN_SLP(gpm0-6, INPUT, DOWN);
1144                 PIN_SLP(gpm0-7, INPUT, DOWN);
1145
1146                 PIN_SLP(gpm1-0, INPUT, DOWN);
1147                 PIN_SLP(gpm1-1, INPUT, DOWN);
1148                 PIN_SLP(gpm1-2, INPUT, NONE);
1149                 PIN_SLP(gpm1-3, INPUT, NONE);
1150                 PIN_SLP(gpm1-4, INPUT, NONE);
1151                 PIN_SLP(gpm1-5, INPUT, NONE);
1152                 PIN_SLP(gpm1-6, INPUT, DOWN);
1153
1154                 PIN_SLP(gpm2-0, INPUT, NONE);
1155                 PIN_SLP(gpm2-1, INPUT, NONE);
1156                 PIN_SLP(gpm2-2, INPUT, DOWN);
1157                 PIN_SLP(gpm2-3, INPUT, DOWN);
1158                 PIN_SLP(gpm2-4, INPUT, DOWN);
1159
1160                 PIN_SLP(gpm3-0, PREV, NONE);
1161                 PIN_SLP(gpm3-1, PREV, NONE);
1162                 PIN_SLP(gpm3-2, PREV, NONE);
1163                 PIN_SLP(gpm3-3, OUT1, NONE);
1164                 PIN_SLP(gpm3-4, INPUT, DOWN);
1165                 PIN_SLP(gpm3-5, INPUT, DOWN);
1166                 PIN_SLP(gpm3-6, INPUT, DOWN);
1167                 PIN_SLP(gpm3-7, INPUT, DOWN);
1168
1169                 PIN_SLP(gpm4-0, INPUT, DOWN);
1170                 PIN_SLP(gpm4-1, INPUT, DOWN);
1171                 PIN_SLP(gpm4-2, INPUT, DOWN);
1172                 PIN_SLP(gpm4-3, INPUT, DOWN);
1173                 PIN_SLP(gpm4-4, INPUT, DOWN);
1174                 PIN_SLP(gpm4-5, INPUT, DOWN);
1175                 PIN_SLP(gpm4-6, INPUT, DOWN);
1176                 PIN_SLP(gpm4-7, INPUT, DOWN);
1177
1178                 PIN_SLP(gpy0-0, INPUT, DOWN);
1179                 PIN_SLP(gpy0-1, INPUT, DOWN);
1180                 PIN_SLP(gpy0-2, INPUT, DOWN);
1181                 PIN_SLP(gpy0-3, INPUT, DOWN);
1182                 PIN_SLP(gpy0-4, INPUT, DOWN);
1183                 PIN_SLP(gpy0-5, INPUT, DOWN);
1184
1185                 PIN_SLP(gpy1-0, INPUT, DOWN);
1186                 PIN_SLP(gpy1-1, INPUT, DOWN);
1187                 PIN_SLP(gpy1-2, INPUT, DOWN);
1188                 PIN_SLP(gpy1-3, INPUT, DOWN);
1189
1190                 PIN_SLP(gpy2-0, PREV, NONE);
1191                 PIN_SLP(gpy2-1, INPUT, DOWN);
1192                 PIN_SLP(gpy2-2, INPUT, NONE);
1193                 PIN_SLP(gpy2-3, INPUT, NONE);
1194                 PIN_SLP(gpy2-4, INPUT, NONE);
1195                 PIN_SLP(gpy2-5, INPUT, NONE);
1196
1197                 PIN_SLP(gpy3-0, INPUT, DOWN);
1198                 PIN_SLP(gpy3-1, INPUT, DOWN);
1199                 PIN_SLP(gpy3-2, INPUT, DOWN);
1200                 PIN_SLP(gpy3-3, INPUT, DOWN);
1201                 PIN_SLP(gpy3-4, INPUT, DOWN);
1202                 PIN_SLP(gpy3-5, INPUT, DOWN);
1203                 PIN_SLP(gpy3-6, INPUT, DOWN);
1204                 PIN_SLP(gpy3-7, INPUT, DOWN);
1205
1206                 PIN_SLP(gpy4-0, INPUT, DOWN);
1207                 PIN_SLP(gpy4-1, INPUT, DOWN);
1208                 PIN_SLP(gpy4-2, INPUT, DOWN);
1209                 PIN_SLP(gpy4-3, INPUT, DOWN);
1210                 PIN_SLP(gpy4-4, INPUT, DOWN);
1211                 PIN_SLP(gpy4-5, INPUT, DOWN);
1212                 PIN_SLP(gpy4-6, INPUT, DOWN);
1213                 PIN_SLP(gpy4-7, INPUT, DOWN);
1214
1215                 PIN_SLP(gpy5-0, INPUT, DOWN);
1216                 PIN_SLP(gpy5-1, INPUT, DOWN);
1217                 PIN_SLP(gpy5-2, INPUT, DOWN);
1218                 PIN_SLP(gpy5-3, INPUT, DOWN);
1219                 PIN_SLP(gpy5-4, INPUT, DOWN);
1220                 PIN_SLP(gpy5-5, INPUT, DOWN);
1221                 PIN_SLP(gpy5-6, INPUT, DOWN);
1222                 PIN_SLP(gpy5-7, INPUT, DOWN);
1223
1224                 PIN_SLP(gpy6-0, INPUT, DOWN);
1225                 PIN_SLP(gpy6-1, INPUT, DOWN);
1226                 PIN_SLP(gpy6-2, INPUT, DOWN);
1227                 PIN_SLP(gpy6-3, INPUT, DOWN);
1228                 PIN_SLP(gpy6-4, INPUT, DOWN);
1229                 PIN_SLP(gpy6-5, INPUT, DOWN);
1230                 PIN_SLP(gpy6-6, INPUT, DOWN);
1231                 PIN_SLP(gpy6-7, INPUT, DOWN);
1232         };
1233 };
1234
1235 &pinctrl_2 {
1236         pinctrl-names = "default";
1237         pinctrl-0 = <&sleep2>;
1238
1239         sleep2: sleep-states {
1240                 PIN_SLP(gpz-0, INPUT, DOWN);
1241                 PIN_SLP(gpz-1, INPUT, DOWN);
1242                 PIN_SLP(gpz-2, INPUT, DOWN);
1243                 PIN_SLP(gpz-3, INPUT, DOWN);
1244                 PIN_SLP(gpz-4, INPUT, DOWN);
1245                 PIN_SLP(gpz-5, INPUT, DOWN);
1246                 PIN_SLP(gpz-6, INPUT, DOWN);
1247         };
1248 };
1249
1250 &pinctrl_3 {
1251         pinctrl-names = "default";
1252         pinctrl-0 = <&sleep3>;
1253
1254         sleep3: sleep-states {
1255                 PIN_SLP(gpv0-0, INPUT, DOWN);
1256                 PIN_SLP(gpv0-1, INPUT, DOWN);
1257                 PIN_SLP(gpv0-2, INPUT, DOWN);
1258                 PIN_SLP(gpv0-3, INPUT, DOWN);
1259                 PIN_SLP(gpv0-4, INPUT, DOWN);
1260                 PIN_SLP(gpv0-5, INPUT, DOWN);
1261                 PIN_SLP(gpv0-6, INPUT, DOWN);
1262                 PIN_SLP(gpv0-7, INPUT, DOWN);
1263
1264                 PIN_SLP(gpv1-0, INPUT, DOWN);
1265                 PIN_SLP(gpv1-1, INPUT, DOWN);
1266                 PIN_SLP(gpv1-2, INPUT, DOWN);
1267                 PIN_SLP(gpv1-3, INPUT, DOWN);
1268                 PIN_SLP(gpv1-4, INPUT, DOWN);
1269                 PIN_SLP(gpv1-5, INPUT, DOWN);
1270                 PIN_SLP(gpv1-6, INPUT, DOWN);
1271                 PIN_SLP(gpv1-7, INPUT, DOWN);
1272
1273                 PIN_SLP(gpv2-0, INPUT, DOWN);
1274                 PIN_SLP(gpv2-1, INPUT, DOWN);
1275                 PIN_SLP(gpv2-2, INPUT, DOWN);
1276                 PIN_SLP(gpv2-3, INPUT, DOWN);
1277                 PIN_SLP(gpv2-4, INPUT, DOWN);
1278                 PIN_SLP(gpv2-5, INPUT, DOWN);
1279                 PIN_SLP(gpv2-6, INPUT, DOWN);
1280                 PIN_SLP(gpv2-7, INPUT, DOWN);
1281
1282                 PIN_SLP(gpv3-0, INPUT, DOWN);
1283                 PIN_SLP(gpv3-1, INPUT, DOWN);
1284                 PIN_SLP(gpv3-2, INPUT, DOWN);
1285                 PIN_SLP(gpv3-3, INPUT, DOWN);
1286                 PIN_SLP(gpv3-4, INPUT, DOWN);
1287                 PIN_SLP(gpv3-5, INPUT, DOWN);
1288                 PIN_SLP(gpv3-6, INPUT, DOWN);
1289                 PIN_SLP(gpv3-7, INPUT, DOWN);
1290
1291                 PIN_SLP(gpv4-0, INPUT, DOWN);
1292         };
1293 };
1294
1295 &pwm {
1296         pinctrl-0 = <&pwm0_out>;
1297         pinctrl-names = "default";
1298         samsung,pwm-outputs = <0>;
1299         status = "okay";
1300 };
1301
1302 &rtc {
1303         status = "okay";
1304         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1305         clock-names = "rtc", "rtc_src";
1306 };
1307
1308 &sdhci_2 {
1309         bus-width = <4>;
1310         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1311         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1312         pinctrl-names = "default";
1313         vmmc-supply = <&ldo21_reg>;
1314         status = "okay";
1315 };
1316
1317 &sdhci_3 {
1318         #address-cells = <1>;
1319         #size-cells = <0>;
1320         non-removable;
1321         bus-width = <4>;
1322
1323         mmc-pwrseq = <&wlan_pwrseq>;
1324         pinctrl-names = "default";
1325         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1326         status = "okay";
1327
1328         brcmf: wifi@1 {
1329                 reg = <1>;
1330                 compatible = "brcm,bcm4329-fmac";
1331                 interrupt-parent = <&gpx2>;
1332                 interrupts = <5 IRQ_TYPE_NONE>;
1333                 interrupt-names = "host-wake";
1334         };
1335 };
1336
1337 &serial_0 {
1338         status = "okay";
1339 };
1340
1341 &serial_1 {
1342         status = "okay";
1343 };
1344
1345 &serial_2 {
1346         status = "okay";
1347 };
1348
1349 &serial_3 {
1350         status = "okay";
1351 };
1352
1353 &spi_1 {
1354         pinctrl-names = "default";
1355         pinctrl-0 = <&spi1_bus>;
1356         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1357         status = "okay";
1358
1359         s5c73m3_spi: s5c73m3@0 {
1360                 compatible = "samsung,s5c73m3";
1361                 spi-max-frequency = <50000000>;
1362                 reg = <0>;
1363                 controller-data {
1364                         samsung,spi-feedback-delay = <2>;
1365                 };
1366         };
1367 };
1368
1369 &tmu {
1370         vtmu-supply = <&ldo10_reg>;
1371         status = "okay";
1372 };