delphij [Fri, 22 Jan 2016 15:55:21 +0000 (15:55 +0000)]
MFC r294554: MFV r294491: ntp 4.2.8p6.
Security: CVE-2015-7973, CVE-2015-7974, CVE-2015-7975
Security: CVE-2015-7976, CVE-2015-7977, CVE-2015-7978
Security: CVE-2015-7979, CVE-2015-8138, CVE-2015-8139
Security: CVE-2015-8140, CVE-2015-8158
With hat: so
ngie [Fri, 22 Jan 2016 07:23:50 +0000 (07:23 +0000)]
MFC r293048,r293444:
r293048:
- Use a temporary file for the temporary md(4) devices instead of
hardcoding it
- Remove the temporary file in the cleanup routine
r293444:
- Move functions that might be used in class-specific cleanup functions
(geom_test_cleanup, etc) down so the testcases don't emit noise when
bailing
- Conform to the TAP protocol better when dealing with classes that can't
be loaded and with temporary files that can't be allocated for tracking
md(4) devices.
pfg [Fri, 22 Jan 2016 03:25:06 +0000 (03:25 +0000)]
Revert r294271:
ext4: add support for reading sparse files
Our older GCC can't handle anonymous unions, so
ia64 and powerpc LINT kernels are now failing.
jilles [Thu, 21 Jan 2016 21:16:57 +0000 (21:16 +0000)]
MFC r294234: utimensat(2): Correct description of [EINVAL] error.
dchagin [Thu, 21 Jan 2016 19:19:24 +0000 (19:19 +0000)]
MFC 294233:
Prevent double free of control in common sendmsg path as sosend
already freeing it.
bz [Thu, 21 Jan 2016 14:11:01 +0000 (14:11 +0000)]
MFC 292953:
This code is not in modules that need KPI stability so no need to use
the wrapper functions as used in r252511 (head). We can directly use
the locking macros.
bz [Thu, 21 Jan 2016 14:08:40 +0000 (14:08 +0000)]
MFC r292604:
If vnets are torn down while ifconfig runs an ioctl to say, destroy an
epair(4), we may hit if_detach_internal() without holding a lock and by
the time we aquire it the interface might be gone.
We should not panic() in this case as it is our fault for not holding
the lock all the way. It is not ideal to return silently without error
to user space, but other callers will all ignore the return values so
do not change the entire KPI for little benefit for now.
The ifp will be dealt with one way or another still.
bz [Thu, 21 Jan 2016 14:06:16 +0000 (14:06 +0000)]
MFC r292603:
If bootverbose is enabled every vnet startup and virtual interface
creation will print extra lines on the console. We are generally not
interested in this (repeated) information for each VNET. Thus only
print it for the default VNET. Virtual interfaces on the base system
will remain printing information, but e.g. each loopback in each vnet
will no longer cause a "bpf attached" line.
bz [Thu, 21 Jan 2016 14:04:02 +0000 (14:04 +0000)]
MFC r292602:
Simplify bringup order by removing a SYSINIT making it a static list
initialization.
Obtained from: p4 @180384,180385
dumbbell [Thu, 21 Jan 2016 08:32:11 +0000 (08:32 +0000)]
iicbus: Use device_delete_children() instead of explicit child removal
If the bus is detached and deleted by a call to device_delete_child() or
device_delete_children() on a device higher in the tree, I²C children
were already detached and deleted. So the device_t pointer stored in sc
points to freed memory: we must not try to delete it again.
By using device_delete_children(), we let subr_bus.c figure out if there
are children to take care of.
While here, make sure iicbus_detach() and iicoc_detach() call
device_delete_children() too, to be safe.
Reviewed by: jhb, imp
Approved by: jhb, imp
Differential Revision: https://reviews.freebsd.org/D3926
dumbbell [Thu, 21 Jan 2016 08:24:54 +0000 (08:24 +0000)]
iicbus: Remove trailing whitespaces
MFC of: r289656
ngie [Thu, 21 Jan 2016 05:59:33 +0000 (05:59 +0000)]
MFC r294126:
Fix warnings with gcc 5.0
reconnect.c:
- Convert the K&R prototype of main to an ANSI prototype to mute a
warning from gcc 4.2.1
- Close s_sock2 after finishing off the last test to plug a leak and
mute a warning from gcc 5.0 about a -Wunused-but-set variable
sendfile.c:
- Fix a -Wunused-but-set warning with gcc 5.0 with pagesize in main(..)
ngie [Thu, 21 Jan 2016 05:57:32 +0000 (05:57 +0000)]
MFC r294127:
Fix warnings with clang/gcc
- Get rid of unused argc/argv variables in main
- Exit on failure with a return code of 1 instead of -1 with err/errx as a
return code of -1 is implementation dependent
- Bump WARNS to 6
jamie [Thu, 21 Jan 2016 04:37:16 +0000 (04:37 +0000)]
MFC r294183:
Clear errno before calling getpw*.
MFC r294196:
Don't bother checking an ip[46].addr netmask/prefixlen. This is already
handled by ifconfig, and it was doing it wrong when the paramater included
extra ifconfig options.
PR: 205926
rpokala [Thu, 21 Jan 2016 03:05:03 +0000 (03:05 +0000)]
MFC r294042: Add rotationrate to geom disk dumpconf
Parse and report the nominal rotation rate reported by the drive.
Approved by: jhb
jhb [Thu, 21 Jan 2016 01:25:28 +0000 (01:25 +0000)]
MFC 292682:
Fix remaining direct tests of the carry flag in the v86 %eflags via a
magic number to use V86_CY() instead. These should have been fixed as
part of the cleanup in r226746 but were missed.
The md5 sums of the object files were unchanged, so there should be no
functional change.
PR: 205424
Submitted by: Alexander Kuleshov <kuleshovmail@gmail.com>
allanjude [Thu, 21 Jan 2016 01:15:40 +0000 (01:15 +0000)]
MFC: r294191
Never 4k align the MBR bootpool because zfsldr can not deal with a gap
Sponsored by: ScaleEngine Inc.
ian [Wed, 20 Jan 2016 22:05:49 +0000 (22:05 +0000)]
Add strlcat and strlcpy to libstand on ia64. This is conceptually part
of the MFC done in r294342, but since ia64 is gone in -current this is a
direct commit to 10-stable to add the functions.
emaste [Wed, 20 Jan 2016 21:22:06 +0000 (21:22 +0000)]
Leave temporary ia64 loader.sym behind if the build fails
This facilitates investigation of the build failure, and is the same way
it's done for other architectures using EFI.
emaste [Wed, 20 Jan 2016 21:06:24 +0000 (21:06 +0000)]
MFC r276539: Update ELF headers to include additional defines
The elftoolchain project includes these additional defines for various
userland programs. Given that arch-specific defines are still interesting
in the context of userland programs reading or writing ELF metadata, they
should be included in top-level ELF headers.
Remove duplicate defines from ARM and MIPS elf headers.
Submitted by: will (initial version)
Sponsored by: The FreeBSD Foundation
brooks [Wed, 20 Jan 2016 19:26:04 +0000 (19:26 +0000)]
MFC r293856:
Avoid reading pass the end of the source buffer when it is not NUL
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206178
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
emaste [Wed, 20 Jan 2016 19:20:28 +0000 (19:20 +0000)]
MFC r288081: Add MIPS ELF section type SHT_MIPS_ABIFLAGS definition
brooks [Wed, 20 Jan 2016 19:08:49 +0000 (19:08 +0000)]
MFC r293855:
Avoid reading pass the end of the source buffer when it is not NUL
terminated.
If this buffer is adjacent to an unmapped page or a version of C with
bounds checked is used this may result in a crash.
PR: 206177
Submitted by: Alexander Cherepanov <cherepan@mccme.ru>
emaste [Wed, 20 Jan 2016 17:40:11 +0000 (17:40 +0000)]
MFC r288083, r288138: elfdump: report MIPS-specific ELF section types
emaste [Wed, 20 Jan 2016 17:38:21 +0000 (17:38 +0000)]
MFC r293245: loader.efi style(9) cleanup
Submitted by: smh
emaste [Wed, 20 Jan 2016 16:59:37 +0000 (16:59 +0000)]
MFC r293234: Enable the beastie menu for the UEFI console
As of r294445 [in stable/10] the UEFI console includes basic terminal
emulator support.
Relnotes: Yes
emaste [Wed, 20 Jan 2016 16:53:38 +0000 (16:53 +0000)]
MFC r293233: loader.efi: add terminal emulation support
This is based on the vidconsole implementation.
Submitted by: Toomas Soome <tsoome@me.com>
Relnotes: Yes
emaste [Wed, 20 Jan 2016 16:41:00 +0000 (16:41 +0000)]
MFC r293281: Use standard name for ASCII LF and FF control codes
PR: 205778
royger [Wed, 20 Jan 2016 13:23:02 +0000 (13:23 +0000)]
MFC r277215, r277291, r277418, r280953 and r280954:
loader: implement multiboot support for Xen Dom0
Note that only the subset of the multiboot specification needed in order to
boot a Xen Dom0 is implemented.
Sponsored by: Citrix Systems R&D
arybchik [Wed, 20 Jan 2016 09:00:42 +0000 (09:00 +0000)]
MFC r294372
sfxge: refresh version to note matching version of out-of-tree driver
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:28:32 +0000 (08:28 +0000)]
MFC r294310
sfxge: improve error handling in ef10_ev_rx()
Ensure that checksum flags and L3/L4 fields are ignored
if lower level errors are reported in the event.
Remove checks for CRC0_ERR (bad iSCSI header CRC) and
CRC1_ERR (bad iSCSI payload or FCoE/FCoIP CRC) as they
are not used by any existing code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:26:58 +0000 (08:26 +0000)]
MFC r294309
sfxge: select whether to read current or backup partition in Medford A/B scheme
The dynamic config on Medford is stored using two partitions in flash, and at
any time one is the 'current' partition, used to provide the active config,
and the other 'backup' partition is used for writes. This means that there
are two potential partitions that can be used to service reads, and which is
required can depend on, for example, whether the read is to get the current
contents or to verify a write.
When the partition write lock is held, the default behaviour is to read from
the backup partition, which was wrong for most reads in the common code which
require the current partition. This change allows the current partition to be
read whilst the write lock is held.
There is one read in Manftest which needs the backup partition.
ef10_nvram_partn_read_mode() is created to avoid changing
ef10_nvram_partn_read() which shares a prototype with the equivalent Falcon
and Siena methods.
MC_CMD_NVRAM_READ_IN_V2 adds an extra field, but firmware which doesn't support
it just ignores it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:25:41 +0000 (08:25 +0000)]
MFC r294259
sfxge: regenerate EF10 registers definition for Medford
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:24:00 +0000 (08:24 +0000)]
MFC r294257
sfxge: regenerate siena_flash.h from FW sources
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:21:07 +0000 (08:21 +0000)]
MFC r294256
sfxge: cleanup: remove extra empty lines
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:20:00 +0000 (08:20 +0000)]
MFC r294255
sfxge: highlight that descriptor cache sizes are configured using TLV now
Submitted by: Tom Millington <tmillington at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:18:43 +0000 (08:18 +0000)]
MFC r294254
sfxge: support RFID-selectable segments of dynamic configuration
tlv_partition_header has field *preset* to support RFID-selectable
segments of dynamic configuration
Submitted by: Mateusz Wrzesinski <mwrzesinski at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:17:28 +0000 (08:17 +0000)]
MFC r294253
sfxge: if supported by firmware, use enhanced SET_MAC command to only configure the MTU
This allows an MTU change to be requested on unpriviliged functions
without also setting all the other parameters supported by MC_CMD_SET_MAC.
The enhanced SET_MAC command was introduced in v4_7 firmware.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:16:30 +0000 (08:16 +0000)]
MFC r294094
sfxge: check the RX DMA end padding configuration on Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:14:42 +0000 (08:14 +0000)]
MFC r294092
sfxge: rename Huntington MAC methods to EF10 and use for Medford
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:13:59 +0000 (08:13 +0000)]
MFC r294091
sfxge: rename common hunt PHY methods to ef10 and use for Medford
Leaving BIST methods for now as, though the Medford bootrom now has lots
of BIST support, production firmware doesn't appear to have been updated
yet.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:13:10 +0000 (08:13 +0000)]
MFC r294081
sfxge: cleanup: simplify ef10_get_datapath_caps
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:11:12 +0000 (08:11 +0000)]
MFC r294079
sfxge: Medford still needs fallback for no privilege mask
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:08:44 +0000 (08:08 +0000)]
MFC r294078
sfxge: medford stores a single global copy of VPD
Not per PF copies as on Huntington.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:07:30 +0000 (08:07 +0000)]
MFC r294077
sfxge: support FATSOv2
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:05:56 +0000 (08:05 +0000)]
MFC r294076
sfxge: rework MCDI request completion
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:03:30 +0000 (08:03 +0000)]
MFC r294075
sfxge: rename hunt_link_state_t to ef10_link_state_t
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:02:11 +0000 (08:02 +0000)]
MFC r293902
sfxge: cleanup: quieten efx_mcdi_read_resonse_header error reporting
The "mcdi_err_arg" probe still reports results of failed MCDI
commands, unless the caller invoked efx_mcdi_execute_quiet().
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 08:01:21 +0000 (08:01 +0000)]
MFC r293901,r294371
sfxge: add accessors for license-related MCDI calls to common code
Add support for Huntington MCDI licensing interface to common code.
Ported from Linux net driver IOCTL functions with restructuring for
initial support for V3 licensing API.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:59:04 +0000 (07:59 +0000)]
MFC r293900
sfxge: add table entries for License NVRAM partition
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:57:18 +0000 (07:57 +0000)]
MFC r293899
sfxge: cleanup: adjust efx_mcdi_get_port_modes() comment for clarity
Fix an explanatory comment which did not explain very well.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:53:26 +0000 (07:53 +0000)]
MFC r293895
sfxge: fix common code VPD iterator and duplicate tag verification
Fix efx_vpd_hunk_next() which has -- since its inception -- failed to
correctly iterate over the tags and keywords contained in the VPD data.
Only the first tag or keyword would be returned and the next call with
*contp == 1 would walk to the end of the data and finish.
This was spotted when fixing up errors spotted by Prefast code analysis
(which neglected to set all of the out parameters in all successful cases)
Also fix efx_vpd_verify() on Siena and EF10 which (as a side effect of
correctly iterating over all the tags and keywords) was failing as it
detected that both the static VPD and dynamic VPD storage contained an
RV keyword in the VPD-R tag. This is intentional as the static VPD and
dynamic VPD are stored separately (firmware merges their contents and
computes a new RV keyword checksum for the data readable from the VPD
capability in PCIe configuration space).
Submitted by: Andrew Lee <alee at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:52:24 +0000 (07:52 +0000)]
MFC r293892
sfxge: use correct register definitions for setting interrupt moderation on Medford
The only value which has changed is the number of rows
(ER_DZ_EVQ_TMR_REG_ROWS is 2048 vs 1024 for FR_BZ_TIMER_COMMAND_REGP0_ROWS)
but that isn't used, so this shouldn't change behaviour.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:51:23 +0000 (07:51 +0000)]
MFC r293891
sfxge: support FATSOv2 in common code
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:50:00 +0000 (07:50 +0000)]
MFC r293890
sfxge: rx_prefix_pktlen methods do not require EFSYS_OPT_RX_SCALE
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:48:49 +0000 (07:48 +0000)]
MFC r293889,r294080,r294093,r294201,r294249-r294252
sfxge: convert nvram methods to use partition id
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:44:05 +0000 (07:44 +0000)]
MFC r293888
sfxge: rework MCDI start request
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
arybchik [Wed, 20 Jan 2016 07:42:31 +0000 (07:42 +0000)]
MFC r293887
sfxge: add Medford NIC methods
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
jhb [Wed, 20 Jan 2016 01:11:01 +0000 (01:11 +0000)]
Regen for r294368.
jhb [Wed, 20 Jan 2016 01:09:53 +0000 (01:09 +0000)]
MFC 289769,289822,290143,290144:
Rename remaining linux32 symbols from linux_* to linux32_*.
289769:
Rename remaining linux32 symbols such as linux_sysent[] and
linux_syscallnames[] from linux_* to linux32_* to avoid conflicts with
linux64.ko. While here, add support for linux64 binaries to systrace.
- Update NOPROTO entries in amd64/linux/syscalls.master to match the
main table to fix systrace build.
- Add a special case for union l_semun arguments to the systrace
generation.
- The systrace_linux32 module now only builds the systrace_linux32.ko.
module on amd64.
- Add a new systrace_linux module that builds on both i386 and amd64.
For i386 it builds the existing systrace_linux.ko. For amd64 it
builds a systrace_linux.ko for 64-bit binaries.
289822:
Fix build for the KTR-enabled kernels.
290143:
Fix build with DEBUG defined.
290144:
Update for LINUX32 rename. The assembler didn't complain about undefined
symbols but just used 0 after the rename.
ian [Tue, 19 Jan 2016 23:36:49 +0000 (23:36 +0000)]
MFC r292337, r292552, r292553:
Build mount_smbfs for arm. Also sort the subdirs.
Avoid unaligned memory accesses when encoding netbios names in libsmb.
The current code for encoding a netbios name converts each byte to a 16-bit
value and stores the result by casting a char* to u_short*, resulting in
alignment faults on strict-alignment platforms.
This change reimplements the encoding routine using only byte accesses to
memory. There is no particular reason to work with 16-bit values just
because the encoding process creates two bytes of output for every byte of
input. Working a byte at at time also avoids endian problems for big-endian
platforms.
Make the building of libsmb and mount_smbfs unconditional, now that r292552
has eliminated alignment and endian problems that were making it fail on
some platforms.
PR: 180438
PR: 189415
Relnotes: Yes
ngie [Tue, 19 Jan 2016 23:18:49 +0000 (23:18 +0000)]
Default __MAKE_SHELL to /bin/sh when generating aton_ether_subr.c via
`gen_ether_subr`.
__MAKE_SHELL is only defined when installworld is run on stable/10,
which breaks workflows dealing with source trees mounted with noexec [*]
This is a direct commit to stable/10
Reported by: Mark Martinec <Mark.Martinec+freebsd@ijs.si>
Sponsored by: EMC / Isilon Storage Division
ian [Tue, 19 Jan 2016 21:42:19 +0000 (21:42 +0000)]
MFC r292888:
Fix the error checking for the ubenv command. This moves the check for an
empty ldvar (which amounts to the varname string starting with '=') into
the if block that manipulates ldvar, which avoids later referencing ldvar
when it was never initialized.
ian [Tue, 19 Jan 2016 21:39:21 +0000 (21:39 +0000)]
MFC r292584:
Set env vars from values on the efi loader command line.
Examine each cmdline arg and if it contains an '=' convert it to ascii and
pass it to putenv(). This allows var=value settings to come in on the
command line.
This will allow overriding dhcp server-provided data in loader(8), as
discussed in PR 202098
PR: 202098
Relnotes: Yes (this goes together with r294343)
ian [Tue, 19 Jan 2016 21:35:09 +0000 (21:35 +0000)]
MFC r292583:
Allow dhcp/bootp server-provided values to be overriden from environment
variables in loader(8) and other libstand applications.
Sometimes a dhcp server provides incorrect information along with the IP
address. It would be useful to have a way to override this with
locally-supplied information, such as command line parameters passed from a
prior-stage bootloader. This change allows pre-existing env vars to take
precedence over values delivered by the dhcp or bootp server.
The bootp/dhcp code in libstand automatically creates environment variables
from the data provided by the server (dhcp.root-path, dhcp.domain-name,
etc). It also transcribes the values to some global variables such as
'rootpath' and 'hostname'.
This change does two things:
When adding dhcp.* vars to the environment, don't replace existing
vars/values.
When setting the global vars rootpath and hostname, use the
dhcp.root-path and dhcp.host-name env var values if they exist.
This allows the platform-specific part of loader(8) to obtain override
values in some platform-specific way and store them in the environment
before opening the network device. The set of values that can be overriden
is currently limited to just string options. The values that are delivered
as binary data are things that probably shouldn't be overridden (IP,
netmask, gateway, etc).
The original patch this evolved from was submitted by martymac@
PR: 202098
Relnotes: Yes
ian [Tue, 19 Jan 2016 21:27:25 +0000 (21:27 +0000)]
MFC r292234, r292527:
Add strlcat() and strlcpy() to libstand and libstand32.
ian [Tue, 19 Jan 2016 21:21:59 +0000 (21:21 +0000)]
MFC r291164, r291876, r292227:
Print more detailed info about the disk and partition chosen for booting.
No behavioral changes, just cosmetics.
Remove stray unescaped `%` in `Booting from ...` informational message.
Enhance the "ubenv import" command to allow importing a u-boot env var
directly into a loader (and thus kernel) env var.
jhb [Tue, 19 Jan 2016 21:08:31 +0000 (21:08 +0000)]
MFC 292669:
Add accessor methods to fetch the BAR holding the MSI-X table and PBA.
While here, explicitly note the requirement that the BAR(s) must be
allocated prior to calling pci_alloc_msix().
jhb [Tue, 19 Jan 2016 19:04:56 +0000 (19:04 +0000)]
MFC 292410,292443,293977:
Exit cleanly if malloc() fails to allocate a buffer for a copy of the
current MBR.
PR: 205322
Submitted by: Alexander Kuleshov <kuleshovmail@gmail.com>
dim [Tue, 19 Jan 2016 18:35:22 +0000 (18:35 +0000)]
MFC r294102:
MFV r294101: 6527 Possible access beyond end of string in zpool comment
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Gordon Ross <gwr@nexenta.com>
illumos/illumos-gate@
2bd7a8d078223b122d65fea49bb8641f858b1409
This fixes erroneous double increments of the 'check' variable in a loop
in spa_prop_validate(). I ran into this in the clang380-import branch,
where clang 3.8.0 warns about it. (It is already fixed there.)
ngie [Tue, 19 Jan 2016 01:41:19 +0000 (01:41 +0000)]
MFC r294128:
Fix -Wunused warning with clang/gcc
- Get rid of unused argc/argv variables in main
- Bump WARNS to 6
ngie [Tue, 19 Jan 2016 01:38:06 +0000 (01:38 +0000)]
MFC r294103:
- Check for accf_filter before running the tests, otherwise it will always
fail at subtest 9/11
- Use strncpy instead of strcpy with afa.af_name
ngie [Tue, 19 Jan 2016 01:35:16 +0000 (01:35 +0000)]
MFC r294123:
Add missing newline to message about requiring root privileges
This will help ensure that scripts/parsers don't get confused when the message
is printed out
ngie [Tue, 19 Jan 2016 01:30:22 +0000 (01:30 +0000)]
MFC r293715:
Fix a mismerge from NetBSD in r162194 with `xdr_rpcb_entry_list_ptr(..)`
This fixes the potential NULL pointer dereference properly, and also fixes
memory leaks encountered in the process of iterating through `*rp`.
Found by: Valgrind
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
gnn [Mon, 18 Jan 2016 21:24:28 +0000 (21:24 +0000)]
MFC: 293459,293643
Add netmap support for bhyve
jhb [Mon, 18 Jan 2016 20:44:29 +0000 (20:44 +0000)]
MFC 292409:
It seems certain Intel GPUs use GPIO bitbanging over a child device
instead of GMBUS access for I2C transfers. The GMBUS driver falls back
to this mode when a transfer times out. However, the first transfer to
timeout was sending the request back to itself resulting in an panic due
to recursing on a lock. Fix it to forward the request on to the proper
device. This appears to have been accidentally changed in r277487.
jhb [Mon, 18 Jan 2016 19:52:20 +0000 (19:52 +0000)]
MFC 291225:
Add a new -B flag for use with list mode (-l) that lists details about
bridges. Currently this includes information about what resources a
bridge decodes on the upstream side for use by downstream devices including
bus numbers, I/O port resources, and memory resources. Windows and bus
ranges are enumerated for both PCI-PCI bridges and PCI-CardBus bridges.
To simplify the implementation, all enumeration is done by reading the
appropriate config space registers directly rather than querying the
bridge driver in the kernel via new ioctls. This does result in a few
limitations.
First, an unimplemented window in a PCI-PCI bridge cannot be accurately
detected as accurate detection requires writing to the window base
register. That is not safe for pciconf(8). Instead, this assumes that
any window where both the base and limit read as all zeroes is
unimplemented.
Second, the PCI-PCI bridge driver in a tree has a few quirks for
PCI-PCI bridges that use subtractive decoding but do not indicate that
via the progif config register. The list of quirks is duplicated in
pciconf's source.
delphij [Mon, 18 Jan 2016 19:42:05 +0000 (19:42 +0000)]
MFC r288303: MFV r288243: nc from OpenBSD 5.8.
delphij [Mon, 18 Jan 2016 19:13:54 +0000 (19:13 +0000)]
MFC r293190: MFV r293125: less v481.
Relnotes: yes
tuexen [Mon, 18 Jan 2016 18:50:26 +0000 (18:50 +0000)]
MFC r289873:
Add support to systat to display SCTP statistics.
MFC r289874:
Bump date in man page.
jhb [Mon, 18 Jan 2016 18:27:21 +0000 (18:27 +0000)]
MFC 290728:
Export various helper variables describing the layout and size of
certain kernel structures for use by debuggers. This mostly aids
in examining cores from a kernel without debug symbols as a debugger
can infer these values if debug symbols are available.
One set of variables describes the layout of 'struct linker_file' to
walk the list of loaded kernel modules.
A second set of variables describes the layout of 'struct proc' and
'struct thread' to walk the list of processes in the kernel and the
threads in each process.
The 'pcb_size' variable is used to index into the stoppcbs[] array.
The 'vm_maxuser_address' is used to distinguish kernel virtual addresses
from user addresses. This doesn't have to be perfect, and
'vm_maxuser_address' is a cheap and simple way to differentiate kernel
pointers from simple values like TIDs and PIDs.
While here, annotate the fields in struct pcb used by kgdb on amd64
and i386 to note that their ABI should be preserved. Annotations for
other platforms will be added in the future.
asomers [Mon, 18 Jan 2016 16:41:26 +0000 (16:41 +0000)]
MFC r292573
Fix "mount -a" for NFS and ZFS filesystems with shared mountpoints
sbin/mount.c
Check whether an fstab entry has the same fstype as a mounted
filesystem before declaring it to be mounted. This will allow NFS
filesystems that share a mountpoint with a local filesystem to be
automatically mounted at boot.
This is not such an unusual situation. For example, if somebody uses
the standard installer with a ZFS root, he'll get a /usr/home
filesystem, even though he may choose to mount /usr/home over NFS.
emaste [Mon, 18 Jan 2016 16:09:58 +0000 (16:09 +0000)]
MFC r281058: Remove whitespace.
emaste [Mon, 18 Jan 2016 15:55:25 +0000 (15:55 +0000)]
MFC r293244: Introduce and use new EFI_ERROR_CODE macro for EFI errors
emaste [Mon, 18 Jan 2016 15:52:07 +0000 (15:52 +0000)]
MFC r293343: Move amd64 metadata.h to x86 and share with i386
emaste [Mon, 18 Jan 2016 15:43:00 +0000 (15:43 +0000)]
MFC r281381: Use explicitly sized types in EFI module metadata
This will allow the same metadata struct to be used on all platforms.
pfg [Mon, 18 Jan 2016 15:39:32 +0000 (15:39 +0000)]
MFC r293680
ext4: add support for reading sparse files
Add support for sparse files in ext4. Also implement read-ahead, which
greatly increases the performance when transferring files from ext4.
The sparse file support has become very common in ext4.
Both features implemented by Damjan Jovanovic.
PR: 205816
emaste [Mon, 18 Jan 2016 15:37:41 +0000 (15:37 +0000)]
MFC r293165: loader.efi: support non-contiguous console modes
emaste [Mon, 18 Jan 2016 15:34:10 +0000 (15:34 +0000)]
MFC r281117: Move boot1.efi to the global CLEANFILES list
It's not x86 specific.
emaste [Mon, 18 Jan 2016 15:30:15 +0000 (15:30 +0000)]
MFC r287930: Various small cleanups to EFI loader Makefiles.
ae [Mon, 18 Jan 2016 11:47:03 +0000 (11:47 +0000)]
MFC r293679:
Change the type of newsize argument in the smbfs_smb_setfsize() function
from int to int64.
MSDN says that SMB_SET_FILE_END_OF_FILE_INFO uses signed 64-bit integer
to specify offset, but since smbfs_smb_setfsize() has used plain int,
a value was truncated in case when offset was larger than 2G.
https://msdn.microsoft.com/en-us/library/
ff469975.aspx
In particular, now `truncate -s 10G` will work correctly on the mounted
SMB share.
ngie [Mon, 18 Jan 2016 03:56:49 +0000 (03:56 +0000)]
Remove tools/regression/lib/msun (follow up to r292497)
Sponsored by: EMC / Isilon Storage Division
ngie [Mon, 18 Jan 2016 03:55:40 +0000 (03:55 +0000)]
MFC r292497:
Integrate the remaining tools/regression/lib/msun testcases into the
FreeBSD test suite under lib/msun/tests
ngie [Mon, 18 Jan 2016 03:49:57 +0000 (03:49 +0000)]
MFC r293705:
Similar to r293704, fix theoretical leak of netconfig(3) resources in
__rpcbind_is_up(..) if getnetconfig(3) is partly successful in allocating
resources, but not completely successful by moving the endnetconfig(3) call
up before we return from the function if nconf == NULL.
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
ngie [Mon, 18 Jan 2016 03:47:46 +0000 (03:47 +0000)]
MFC r293704:
Fix theoretical leak of netconfig(3) resources in svcunix_create(..)
In the event that the getconfig(3) call in svcunix_create is partly successful,
some of the netconfig(3) resources allocated might be leaked if the call returns
NULL as endnetconfig(3) wasn't called explicitly in that case. Ensure that the
resources are fully cleaned up by going to the `done` label, which will call
endnetconfig(3) for us.
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
tuexen [Sun, 17 Jan 2016 18:39:01 +0000 (18:39 +0000)]
MFC r287281:
Report CLOSED as state for bound sockets for consistency with
netstat and the way TCP is handled.
tuexen [Sun, 17 Jan 2016 18:37:36 +0000 (18:37 +0000)]
MFC r287182:
Add SCTP support.
tuexen [Sun, 17 Jan 2016 18:35:46 +0000 (18:35 +0000)]
MFC r287179:
Remove a variable which is set but never used.
ian [Sun, 17 Jan 2016 18:18:01 +0000 (18:18 +0000)]
MFC r293781:
Restore uart PPS signal capture polarity to its historical norm, and add an
option to invert the polarity in software. Also add an option to capture
very narrow pulses by using the hardware's MSR delta-bit capability of
latching line state changes.
Relnotes: yes
des [Sun, 17 Jan 2016 18:07:32 +0000 (18:07 +0000)]
MFH (r287178): print status on first line, not last.
This revision has previously been (incorrectly) recorded as merged.