drivers/mfd/88pm800.c

   1 /*
   2  * Base driver for Marvell 88PM800
   3  *
   4  * Copyright (C) 2012 Marvell International Ltd.
   5  * Haojian Zhuang <haojian.zhuang@marvell.com>
   6  * Joseph(Yossi) Hanin <yhanin@marvell.com>
   7  * Qiao Zhou <zhouqiao@marvell.com>
   8  *
   9  * This file is subject to the terms and conditions of the GNU General
  10  * Public License. See the file "COPYING" in the main directory of this
  11  * archive for more details.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21  */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/err.h>
  26 #include <linux/i2c.h>
  27 #include <linux/mfd/core.h>
  28 #include <linux/mfd/88pm80x.h>
  29 #include <linux/slab.h>
  30
  31 /* Interrupt Registers */
  32 #define PM800_INT_STATUS1               (0x05)
  33 #define PM800_ONKEY_INT_STS1            (1 << 0)
  34 #define PM800_EXTON_INT_STS1            (1 << 1)
  35 #define PM800_CHG_INT_STS1                      (1 << 2)
  36 #define PM800_BAT_INT_STS1                      (1 << 3)
  37 #define PM800_RTC_INT_STS1                      (1 << 4)
  38 #define PM800_CLASSD_OC_INT_STS1        (1 << 5)
  39
  40 #define PM800_INT_STATUS2               (0x06)
  41 #define PM800_VBAT_INT_STS2             (1 << 0)
  42 #define PM800_VSYS_INT_STS2             (1 << 1)
  43 #define PM800_VCHG_INT_STS2             (1 << 2)
  44 #define PM800_TINT_INT_STS2             (1 << 3)
  45 #define PM800_GPADC0_INT_STS2   (1 << 4)
  46 #define PM800_TBAT_INT_STS2             (1 << 5)
  47 #define PM800_GPADC2_INT_STS2   (1 << 6)
  48 #define PM800_GPADC3_INT_STS2   (1 << 7)
  49
  50 #define PM800_INT_STATUS3               (0x07)
  51
  52 #define PM800_INT_STATUS4               (0x08)
  53 #define PM800_GPIO0_INT_STS4            (1 << 0)
  54 #define PM800_GPIO1_INT_STS4            (1 << 1)
  55 #define PM800_GPIO2_INT_STS4            (1 << 2)
  56 #define PM800_GPIO3_INT_STS4            (1 << 3)
  57 #define PM800_GPIO4_INT_STS4            (1 << 4)
  58
  59 #define PM800_INT_ENA_1         (0x09)
  60 #define PM800_ONKEY_INT_ENA1            (1 << 0)
  61 #define PM800_EXTON_INT_ENA1            (1 << 1)
  62 #define PM800_CHG_INT_ENA1                      (1 << 2)
  63 #define PM800_BAT_INT_ENA1                      (1 << 3)
  64 #define PM800_RTC_INT_ENA1                      (1 << 4)
  65 #define PM800_CLASSD_OC_INT_ENA1        (1 << 5)
  66
  67 #define PM800_INT_ENA_2         (0x0A)
  68 #define PM800_VBAT_INT_ENA2             (1 << 0)
  69 #define PM800_VSYS_INT_ENA2             (1 << 1)
  70 #define PM800_VCHG_INT_ENA2             (1 << 2)
  71 #define PM800_TINT_INT_ENA2             (1 << 3)
  72
  73 #define PM800_INT_ENA_3         (0x0B)
  74 #define PM800_GPADC0_INT_ENA3           (1 << 0)
  75 #define PM800_GPADC1_INT_ENA3           (1 << 1)
  76 #define PM800_GPADC2_INT_ENA3           (1 << 2)
  77 #define PM800_GPADC3_INT_ENA3           (1 << 3)
  78 #define PM800_GPADC4_INT_ENA3           (1 << 4)
  79
  80 #define PM800_INT_ENA_4         (0x0C)
  81 #define PM800_GPIO0_INT_ENA4            (1 << 0)
  82 #define PM800_GPIO1_INT_ENA4            (1 << 1)
  83 #define PM800_GPIO2_INT_ENA4            (1 << 2)
  84 #define PM800_GPIO3_INT_ENA4            (1 << 3)
  85 #define PM800_GPIO4_INT_ENA4            (1 << 4)
  86
  87 /* number of INT_ENA & INT_STATUS regs */
  88 #define PM800_INT_REG_NUM                       (4)
  89
  90 /* Interrupt Number in 88PM800 */
  91 enum {
  92         PM800_IRQ_ONKEY,        /*EN1b0 *//*0 */
  93         PM800_IRQ_EXTON,        /*EN1b1 */
  94         PM800_IRQ_CHG,          /*EN1b2 */
  95         PM800_IRQ_BAT,          /*EN1b3 */
  96         PM800_IRQ_RTC,          /*EN1b4 */
  97         PM800_IRQ_CLASSD,       /*EN1b5 *//*5 */
  98         PM800_IRQ_VBAT,         /*EN2b0 */
  99         PM800_IRQ_VSYS,         /*EN2b1 */
 100         PM800_IRQ_VCHG,         /*EN2b2 */
 101         PM800_IRQ_TINT,         /*EN2b3 */
 102         PM800_IRQ_GPADC0,       /*EN3b0 *//*10 */
 103         PM800_IRQ_GPADC1,       /*EN3b1 */
 104         PM800_IRQ_GPADC2,       /*EN3b2 */
 105         PM800_IRQ_GPADC3,       /*EN3b3 */
 106         PM800_IRQ_GPADC4,       /*EN3b4 */
 107         PM800_IRQ_GPIO0,        /*EN4b0 *//*15 */
 108         PM800_IRQ_GPIO1,        /*EN4b1 */
 109         PM800_IRQ_GPIO2,        /*EN4b2 */
 110         PM800_IRQ_GPIO3,        /*EN4b3 */
 111         PM800_IRQ_GPIO4,        /*EN4b4 *//*19 */
 112         PM800_MAX_IRQ,
 113 };
 114
 115 /* PM800: generation identification number */
 116 #define PM800_CHIP_GEN_ID_NUM   0x3
 117
 118 static const struct i2c_device_id pm80x_id_table[] = {
 119         {"88PM800", 0},
 120         {} /* NULL terminated */
 121 };
 122 MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
 123
 124 static const struct resource rtc_resources[] = {
 125         DEFINE_RES_IRQ_NAMED(PM800_IRQ_RTC, "88pm80x-rtc"),
 126 };
 127
 128 static struct mfd_cell rtc_devs[] = {
 129         {
 130          .name = "88pm80x-rtc",
 131          .num_resources = ARRAY_SIZE(rtc_resources),
 132          .resources = &rtc_resources[0],
 133          .id = -1,
 134          },
 135 };
 136
 137 static struct resource onkey_resources[] = {
 138         DEFINE_RES_IRQ_NAMED(PM800_IRQ_ONKEY, "88pm80x-onkey"),
 139 };
 140
 141 static const struct mfd_cell onkey_devs[] = {
 142         {
 143          .name = "88pm80x-onkey",
 144          .num_resources = 1,
 145          .resources = &onkey_resources[0],
 146          .id = -1,
 147          },
 148 };
 149
 150 static const struct mfd_cell regulator_devs[] = {
 151         {
 152          .name = "88pm80x-regulator",
 153          .id = -1,
 154         },
 155 };
 156
 157 static const struct regmap_irq pm800_irqs[] = {
 158         /* INT0 */
 159         [PM800_IRQ_ONKEY] = {
 160                 .mask = PM800_ONKEY_INT_ENA1,
 161         },
 162         [PM800_IRQ_EXTON] = {
 163                 .mask = PM800_EXTON_INT_ENA1,
 164         },
 165         [PM800_IRQ_CHG] = {
 166                 .mask = PM800_CHG_INT_ENA1,
 167         },
 168         [PM800_IRQ_BAT] = {
 169                 .mask = PM800_BAT_INT_ENA1,
 170         },
 171         [PM800_IRQ_RTC] = {
 172                 .mask = PM800_RTC_INT_ENA1,
 173         },
 174         [PM800_IRQ_CLASSD] = {
 175                 .mask = PM800_CLASSD_OC_INT_ENA1,
 176         },
 177         /* INT1 */
 178         [PM800_IRQ_VBAT] = {
 179                 .reg_offset = 1,
 180                 .mask = PM800_VBAT_INT_ENA2,
 181         },
 182         [PM800_IRQ_VSYS] = {
 183                 .reg_offset = 1,
 184                 .mask = PM800_VSYS_INT_ENA2,
 185         },
 186         [PM800_IRQ_VCHG] = {
 187                 .reg_offset = 1,
 188                 .mask = PM800_VCHG_INT_ENA2,
 189         },
 190         [PM800_IRQ_TINT] = {
 191                 .reg_offset = 1,
 192                 .mask = PM800_TINT_INT_ENA2,
 193         },
 194         /* INT2 */
 195         [PM800_IRQ_GPADC0] = {
 196                 .reg_offset = 2,
 197                 .mask = PM800_GPADC0_INT_ENA3,
 198         },
 199         [PM800_IRQ_GPADC1] = {
 200                 .reg_offset = 2,
 201                 .mask = PM800_GPADC1_INT_ENA3,
 202         },
 203         [PM800_IRQ_GPADC2] = {
 204                 .reg_offset = 2,
 205                 .mask = PM800_GPADC2_INT_ENA3,
 206         },
 207         [PM800_IRQ_GPADC3] = {
 208                 .reg_offset = 2,
 209                 .mask = PM800_GPADC3_INT_ENA3,
 210         },
 211         [PM800_IRQ_GPADC4] = {
 212                 .reg_offset = 2,
 213                 .mask = PM800_GPADC4_INT_ENA3,
 214         },
 215         /* INT3 */
 216         [PM800_IRQ_GPIO0] = {
 217                 .reg_offset = 3,
 218                 .mask = PM800_GPIO0_INT_ENA4,
 219         },
 220         [PM800_IRQ_GPIO1] = {
 221                 .reg_offset = 3,
 222                 .mask = PM800_GPIO1_INT_ENA4,
 223         },
 224         [PM800_IRQ_GPIO2] = {
 225                 .reg_offset = 3,
 226                 .mask = PM800_GPIO2_INT_ENA4,
 227         },
 228         [PM800_IRQ_GPIO3] = {
 229                 .reg_offset = 3,
 230                 .mask = PM800_GPIO3_INT_ENA4,
 231         },
 232         [PM800_IRQ_GPIO4] = {
 233                 .reg_offset = 3,
 234                 .mask = PM800_GPIO4_INT_ENA4,
 235         },
 236 };
 237
 238 static int device_gpadc_init(struct pm80x_chip *chip,
 239                                        struct pm80x_platform_data *pdata)
 240 {
 241         struct pm80x_subchip *subchip = chip->subchip;
 242         struct regmap *map = subchip->regmap_gpadc;
 243         int data = 0, mask = 0, ret = 0;
 244
 245         if (!map) {
 246                 dev_warn(chip->dev,
 247                          "Warning: gpadc regmap is not available!\n");
 248                 return -EINVAL;
 249         }
 250         /*
 251          * initialize GPADC without activating it turn on GPADC
 252          * measurments
 253          */
 254         ret = regmap_update_bits(map,
 255                                  PM800_GPADC_MISC_CONFIG2,
 256                                  PM800_GPADC_MISC_GPFSM_EN,
 257                                  PM800_GPADC_MISC_GPFSM_EN);
 258         if (ret < 0)
 259                 goto out;
 260         /*
 261          * This function configures the ADC as requires for
 262          * CP implementation.CP does not "own" the ADC configuration
 263          * registers and relies on AP.
 264          * Reason: enable automatic ADC measurements needed
 265          * for CP to get VBAT and RF temperature readings.
 266          */
 267         ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1,
 268                                  PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT);
 269         if (ret < 0)
 270                 goto out;
 271         ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2,
 272                                  (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN),
 273                                  (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN));
 274         if (ret < 0)
 275                 goto out;
 276
 277         /*
 278          * the defult of PM800 is GPADC operates at 100Ks/s rate
 279          * and Number of GPADC slots with active current bias prior
 280          * to GPADC sampling = 1 slot for all GPADCs set for
 281          * Temprature mesurmants
 282          */
 283         mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
 284                 PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
 285
 286         if (pdata && (pdata->batt_det == 0))
 287                 data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 |
 288                         PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3);
 289         else
 290                 data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 |
 291                         PM800_GPADC_GP_BIAS_EN3);
 292
 293         ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data);
 294         if (ret < 0)
 295                 goto out;
 296
 297         dev_info(chip->dev, "pm800 device_gpadc_init: Done\n");
 298         return 0;
 299
 300 out:
 301         dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n");
 302         return ret;
 303 }
 304
 305 static int device_onkey_init(struct pm80x_chip *chip,
 306                                 struct pm80x_platform_data *pdata)
 307 {
 308         int ret;
 309
 310         ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0],
 311                               ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0,
 312                               NULL);
 313         if (ret) {
 314                 dev_err(chip->dev, "Failed to add onkey subdev\n");
 315                 return ret;
 316         }
 317
 318         return 0;
 319 }
 320
 321 static int device_rtc_init(struct pm80x_chip *chip,
 322                                 struct pm80x_platform_data *pdata)
 323 {
 324         int ret;
 325
 326         if (pdata) {
 327                 rtc_devs[0].platform_data = pdata->rtc;
 328                 rtc_devs[0].pdata_size =
 329                                 pdata->rtc ? sizeof(struct pm80x_rtc_pdata) : 0;
 330         }
 331         ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0],
 332                               ARRAY_SIZE(rtc_devs), NULL, 0, NULL);
 333         if (ret) {
 334                 dev_err(chip->dev, "Failed to add rtc subdev\n");
 335                 return ret;
 336         }
 337
 338         return 0;
 339 }
 340
 341 static int device_regulator_init(struct pm80x_chip *chip,
 342                                            struct pm80x_platform_data *pdata)
 343 {
 344         int ret;
 345
 346         ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
 347                               ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
 348         if (ret) {
 349                 dev_err(chip->dev, "Failed to add regulator subdev\n");
 350                 return ret;
 351         }
 352
 353         return 0;
 354 }
 355
 356 static int device_irq_init_800(struct pm80x_chip *chip)
 357 {
 358         struct regmap *map = chip->regmap;
 359         unsigned long flags = IRQF_ONESHOT;
 360         int data, mask, ret = -EINVAL;
 361
 362         if (!map || !chip->irq) {
 363                 dev_err(chip->dev, "incorrect parameters\n");
 364                 return -EINVAL;
 365         }
 366
 367         /*
 368          * irq_mode defines the way of clearing interrupt. it's read-clear by
 369          * default.
 370          */
 371         mask =
 372             PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
 373             PM800_WAKEUP2_INT_MASK;
 374
 375         data = PM800_WAKEUP2_INT_CLEAR;
 376         ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
 377
 378         if (ret < 0)
 379                 goto out;
 380
 381         ret =
 382             regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
 383                                 chip->regmap_irq_chip, &chip->irq_data);
 384
 385 out:
 386         return ret;
 387 }
 388
 389 static void device_irq_exit_800(struct pm80x_chip *chip)
 390 {
 391         regmap_del_irq_chip(chip->irq, chip->irq_data);
 392 }
 393
 394 static struct regmap_irq_chip pm800_irq_chip = {
 395         .name = "88pm800",
 396         .irqs = pm800_irqs,
 397         .num_irqs = ARRAY_SIZE(pm800_irqs),
 398
 399         .num_regs = 4,
 400         .status_base = PM800_INT_STATUS1,
 401         .unmask_base = PM800_INT_ENA_1,
 402         .ack_base = PM800_INT_STATUS1,
 403 };
 404
 405 static int pm800_pages_init(struct pm80x_chip *chip)
 406 {
 407         struct pm80x_subchip *subchip;
 408         struct i2c_client *client = chip->client;
 409
 410         int ret = 0;
 411
 412         subchip = chip->subchip;
 413         if (!subchip || !subchip->power_page_addr || !subchip->gpadc_page_addr)
 414                 return -ENODEV;
 415
 416         /* PM800 block power page */
 417         subchip->power_page = i2c_new_dummy_device(client->adapter,
 418                                             subchip->power_page_addr);
 419         if (IS_ERR(subchip->power_page)) {
 420                 ret = PTR_ERR(subchip->power_page);
 421                 goto out;
 422         }
 423
 424         subchip->regmap_power = devm_regmap_init_i2c(subchip->power_page,
 425                                                      &pm80x_regmap_config);
 426         if (IS_ERR(subchip->regmap_power)) {
 427                 ret = PTR_ERR(subchip->regmap_power);
 428                 dev_err(chip->dev,
 429                         "Failed to allocate regmap_power: %d\n", ret);
 430                 goto out;
 431         }
 432
 433         i2c_set_clientdata(subchip->power_page, chip);
 434
 435         /* PM800 block GPADC */
 436         subchip->gpadc_page = i2c_new_dummy_device(client->adapter,
 437                                             subchip->gpadc_page_addr);
 438         if (IS_ERR(subchip->gpadc_page)) {
 439                 ret = PTR_ERR(subchip->gpadc_page);
 440                 goto out;
 441         }
 442
 443         subchip->regmap_gpadc = devm_regmap_init_i2c(subchip->gpadc_page,
 444                                                      &pm80x_regmap_config);
 445         if (IS_ERR(subchip->regmap_gpadc)) {
 446                 ret = PTR_ERR(subchip->regmap_gpadc);
 447                 dev_err(chip->dev,
 448                         "Failed to allocate regmap_gpadc: %d\n", ret);
 449                 goto out;
 450         }
 451         i2c_set_clientdata(subchip->gpadc_page, chip);
 452
 453 out:
 454         return ret;
 455 }
 456
 457 static void pm800_pages_exit(struct pm80x_chip *chip)
 458 {
 459         struct pm80x_subchip *subchip;
 460
 461         subchip = chip->subchip;
 462
 463         if (subchip && subchip->power_page)
 464                 i2c_unregister_device(subchip->power_page);
 465
 466         if (subchip && subchip->gpadc_page)
 467                 i2c_unregister_device(subchip->gpadc_page);
 468 }
 469
 470 static int device_800_init(struct pm80x_chip *chip,
 471                                      struct pm80x_platform_data *pdata)
 472 {
 473         int ret;
 474         unsigned int val;
 475
 476         /*
 477          * alarm wake up bit will be clear in device_irq_init(),
 478          * read before that
 479          */
 480         ret = regmap_read(chip->regmap, PM800_RTC_CONTROL, &val);
 481         if (ret < 0) {
 482                 dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
 483                 goto out;
 484         }
 485         if (val & PM800_ALARM_WAKEUP) {
 486                 if (pdata && pdata->rtc)
 487                         pdata->rtc->rtc_wakeup = 1;
 488         }
 489
 490         ret = device_gpadc_init(chip, pdata);
 491         if (ret < 0) {
 492                 dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__);
 493                 goto out;
 494         }
 495
 496         chip->regmap_irq_chip = &pm800_irq_chip;
 497
 498         ret = device_irq_init_800(chip);
 499         if (ret < 0) {
 500                 dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__);
 501                 goto out;
 502         }
 503
 504         ret = device_onkey_init(chip, pdata);
 505         if (ret) {
 506                 dev_err(chip->dev, "Failed to add onkey subdev\n");
 507                 goto out_dev;
 508         }
 509
 510         ret = device_rtc_init(chip, pdata);
 511         if (ret) {
 512                 dev_err(chip->dev, "Failed to add rtc subdev\n");
 513                 goto out;
 514         }
 515
 516         ret = device_regulator_init(chip, pdata);
 517         if (ret) {
 518                 dev_err(chip->dev, "Failed to add regulators subdev\n");
 519                 goto out;
 520         }
 521
 522         return 0;
 523 out_dev:
 524         mfd_remove_devices(chip->dev);
 525         device_irq_exit_800(chip);
 526 out:
 527         return ret;
 528 }
 529
 530 static int pm800_probe(struct i2c_client *client)
 531 {
 532         int ret = 0;
 533         struct pm80x_chip *chip;
 534         struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
 535         struct pm80x_subchip *subchip;
 536
 537         ret = pm80x_init(client);
 538         if (ret) {
 539                 dev_err(&client->dev, "pm800_init fail\n");
 540                 goto out_init;
 541         }
 542
 543         chip = i2c_get_clientdata(client);
 544
 545         /* init subchip for PM800 */
 546         subchip =
 547             devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
 548                          GFP_KERNEL);
 549         if (!subchip) {
 550                 ret = -ENOMEM;
 551                 goto err_subchip_alloc;
 552         }
 553
 554         /* pm800 has 2 addtional pages to support power and gpadc. */
 555         subchip->power_page_addr = client->addr + 1;
 556         subchip->gpadc_page_addr = client->addr + 2;
 557         chip->subchip = subchip;
 558
 559         ret = pm800_pages_init(chip);
 560         if (ret) {
 561                 dev_err(&client->dev, "pm800_pages_init failed!\n");
 562                 goto err_device_init;
 563         }
 564
 565         ret = device_800_init(chip, pdata);
 566         if (ret) {
 567                 dev_err(chip->dev, "Failed to initialize 88pm800 devices\n");
 568                 goto err_device_init;
 569         }
 570
 571         if (pdata && pdata->plat_config)
 572                 pdata->plat_config(chip, pdata);
 573
 574         return 0;
 575
 576 err_device_init:
 577         pm800_pages_exit(chip);
 578 err_subchip_alloc:
 579         pm80x_deinit();
 580 out_init:
 581         return ret;
 582 }
 583
 584 static void pm800_remove(struct i2c_client *client)
 585 {
 586         struct pm80x_chip *chip = i2c_get_clientdata(client);
 587
 588         mfd_remove_devices(chip->dev);
 589         device_irq_exit_800(chip);
 590
 591         pm800_pages_exit(chip);
 592         pm80x_deinit();
 593 }
 594
 595 static struct i2c_driver pm800_driver = {
 596         .driver = {
 597                 .name = "88PM800",
 598                 .pm = pm_sleep_ptr(&pm80x_pm_ops),
 599                 },
 600         .probe_new = pm800_probe,
 601         .remove = pm800_remove,
 602         .id_table = pm80x_id_table,
 603 };
 604
 605 static int __init pm800_i2c_init(void)
 606 {
 607         return i2c_add_driver(&pm800_driver);
 608 }
 609 subsys_initcall(pm800_i2c_init);
 610
 611 static void __exit pm800_i2c_exit(void)
 612 {
 613         i2c_del_driver(&pm800_driver);
 614 }
 615 module_exit(pm800_i2c_exit);
 616
 617 MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800");
 618 MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
 619 MODULE_LICENSE("GPL");