Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

[linux.git] / mm / readahead.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * mm/readahead.c - address_space-level file readahead.
 *
 * Copyright (C) 2002, Linus Torvalds
 *
 * 09Apr2002    Andrew Morton
 *              Initial version.
 */

/**
 * DOC: Readahead Overview
 *
 * Readahead is used to read content into the page cache before it is
 * explicitly requested by the application.  Readahead only ever
 * attempts to read folios that are not yet in the page cache.  If a
 * folio is present but not up-to-date, readahead will not try to read
 * it. In that case a simple ->read_folio() will be requested.
 *
 * Readahead is triggered when an application read request (whether a
 * system call or a page fault) finds that the requested folio is not in
 * the page cache, or that it is in the page cache and has the
 * readahead flag set.  This flag indicates that the folio was read
 * as part of a previous readahead request and now that it has been
 * accessed, it is time for the next readahead.
 *
 * Each readahead request is partly synchronous read, and partly async
 * readahead.  This is reflected in the struct file_ra_state which
 * contains ->size being the total number of pages, and ->async_size
 * which is the number of pages in the async section.  The readahead
 * flag will be set on the first folio in this async section to trigger
 * a subsequent readahead.  Once a series of sequential reads has been
 * established, there should be no need for a synchronous component and
 * all readahead request will be fully asynchronous.
 *
 * When either of the triggers causes a readahead, three numbers need
 * to be determined: the start of the region to read, the size of the
 * region, and the size of the async tail.
 *
 * The start of the region is simply the first page address at or after
 * the accessed address, which is not currently populated in the page
 * cache.  This is found with a simple search in the page cache.
 *
 * The size of the async tail is determined by subtracting the size that
 * was explicitly requested from the determined request size, unless
 * this would be less than zero - then zero is used.  NOTE THIS
 * CALCULATION IS WRONG WHEN THE START OF THE REGION IS NOT THE ACCESSED
 * PAGE.  ALSO THIS CALCULATION IS NOT USED CONSISTENTLY.
 *
 * The size of the region is normally determined from the size of the
 * previous readahead which loaded the preceding pages.  This may be
 * discovered from the struct file_ra_state for simple sequential reads,
 * or from examining the state of the page cache when multiple
 * sequential reads are interleaved.  Specifically: where the readahead
 * was triggered by the readahead flag, the size of the previous
 * readahead is assumed to be the number of pages from the triggering
 * page to the start of the new readahead.  In these cases, the size of
 * the previous readahead is scaled, often doubled, for the new
 * readahead, though see get_next_ra_size() for details.
 *
 * If the size of the previous read cannot be determined, the number of
 * preceding pages in the page cache is used to estimate the size of
 * a previous read.  This estimate could easily be misled by random
 * reads being coincidentally adjacent, so it is ignored unless it is
 * larger than the current request, and it is not scaled up, unless it
 * is at the start of file.
 *
 * In general readahead is accelerated at the start of the file, as
 * reads from there are often sequential.  There are other minor
 * adjustments to the readahead size in various special cases and these
 * are best discovered by reading the code.
 *
 * The above calculation, based on the previous readahead size,
 * determines the size of the readahead, to which any requested read
 * size may be added.
 *
 * Readahead requests are sent to the filesystem using the ->readahead()
 * address space operation, for which mpage_readahead() is a canonical
 * implementation.  ->readahead() should normally initiate reads on all
 * folios, but may fail to read any or all folios without causing an I/O
 * error.  The page cache reading code will issue a ->read_folio() request
 * for any folio which ->readahead() did not read, and only an error
 * from this will be final.
 *
 * ->readahead() will generally call readahead_folio() repeatedly to get
 * each folio from those prepared for readahead.  It may fail to read a
 * folio by:
 *
 * * not calling readahead_folio() sufficiently many times, effectively
 *   ignoring some folios, as might be appropriate if the path to
 *   storage is congested.
 *
 * * failing to actually submit a read request for a given folio,
 *   possibly due to insufficient resources, or
 *
 * * getting an error during subsequent processing of a request.
 *
 * In the last two cases, the folio should be unlocked by the filesystem
 * to indicate that the read attempt has failed.  In the first case the
 * folio will be unlocked by the VFS.
 *
 * Those folios not in the final ``async_size`` of the request should be
 * considered to be important and ->readahead() should not fail them due
 * to congestion or temporary resource unavailability, but should wait
 * for necessary resources (e.g.  memory or indexing information) to
 * become available.  Folios in the final ``async_size`` may be
 * considered less urgent and failure to read them is more acceptable.
 * In this case it is best to use filemap_remove_folio() to remove the
 * folios from the page cache as is automatically done for folios that
 * were not fetched with readahead_folio().  This will allow a
 * subsequent synchronous readahead request to try them again.  If they
 * are left in the page cache, then they will be read individually using
 * ->read_folio() which may be less efficient.
 */

#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/dax.h>
#include <linux/gfp.h>
#include <linux/export.h>
#include <linux/backing-dev.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/pagemap.h>
#include <linux/psi.h>
#include <linux/syscalls.h>
#include <linux/file.h>
#include <linux/mm_inline.h>
#include <linux/blk-cgroup.h>
#include <linux/fadvise.h>
#include <linux/sched/mm.h>

#include "internal.h"

/*
 * Initialise a struct file's readahead state.  Assumes that the caller has
 * memset *ra to zero.
 */
void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping)
{
        ra->ra_pages = inode_to_bdi(mapping->host)->ra_pages;
        ra->prev_pos = -1;
}
EXPORT_SYMBOL_GPL(file_ra_state_init);

static void read_pages(struct readahead_control *rac)
{
        const struct address_space_operations *aops = rac->mapping->a_ops;
        struct folio *folio;
        struct blk_plug plug;

        if (!readahead_count(rac))
                return;

        if (unlikely(rac->_workingset))
                psi_memstall_enter(&rac->_pflags);
        blk_start_plug(&plug);

        if (aops->readahead) {
                aops->readahead(rac);
                /*
                 * Clean up the remaining folios.  The sizes in ->ra
                 * may be used to size the next readahead, so make sure
                 * they accurately reflect what happened.
                 */
                while ((folio = readahead_folio(rac)) != NULL) {
                        unsigned long nr = folio_nr_pages(folio);

                        folio_get(folio);
                        rac->ra->size -= nr;
                        if (rac->ra->async_size >= nr) {
                                rac->ra->async_size -= nr;
                                filemap_remove_folio(folio);
                        }
                        folio_unlock(folio);
                        folio_put(folio);
                }
        } else {
                while ((folio = readahead_folio(rac)) != NULL)
                        aops->read_folio(rac->file, folio);
        }

        blk_finish_plug(&plug);
        if (unlikely(rac->_workingset))
                psi_memstall_leave(&rac->_pflags);
        rac->_workingset = false;

        BUG_ON(readahead_count(rac));
}

/**
 * page_cache_ra_unbounded - Start unchecked readahead.
 * @ractl: Readahead control.
 * @nr_to_read: The number of pages to read.
 * @lookahead_size: Where to start the next readahead.
 *
 * This function is for filesystems to call when they want to start
 * readahead beyond a file's stated i_size.  This is almost certainly
 * not the function you want to call.  Use page_cache_async_readahead()
 * or page_cache_sync_readahead() instead.
 *
 * Context: File is referenced by caller.  Mutexes may be held by caller.
 * May sleep, but will not reenter filesystem to reclaim memory.
 */
void page_cache_ra_unbounded(struct readahead_control *ractl,
                unsigned long nr_to_read, unsigned long lookahead_size)
{
        struct address_space *mapping = ractl->mapping;
        unsigned long index = readahead_index(ractl);
        gfp_t gfp_mask = readahead_gfp_mask(mapping);
        unsigned long i;

        /*
         * Partway through the readahead operation, we will have added
         * locked pages to the page cache, but will not yet have submitted
         * them for I/O.  Adding another page may need to allocate memory,
         * which can trigger memory reclaim.  Telling the VM we're in
         * the middle of a filesystem operation will cause it to not
         * touch file-backed pages, preventing a deadlock.  Most (all?)
         * filesystems already specify __GFP_NOFS in their mapping's
         * gfp_mask, but let's be explicit here.
         */
        unsigned int nofs = memalloc_nofs_save();

        filemap_invalidate_lock_shared(mapping);
        /*
         * Preallocate as many pages as we will need.
         */
        for (i = 0; i < nr_to_read; i++) {
                struct folio *folio = xa_load(&mapping->i_pages, index + i);
                int ret;

                if (folio && !xa_is_value(folio)) {
                        /*
                         * Page already present?  Kick off the current batch
                         * of contiguous pages before continuing with the
                         * next batch.  This page may be the one we would
                         * have intended to mark as Readahead, but we don't
                         * have a stable reference to this page, and it's
                         * not worth getting one just for that.
                         */
                        read_pages(ractl);
                        ractl->_index++;
                        i = ractl->_index + ractl->_nr_pages - index - 1;
                        continue;
                }

                folio = filemap_alloc_folio(gfp_mask, 0);
                if (!folio)
                        break;

                ret = filemap_add_folio(mapping, folio, index + i, gfp_mask);
                if (ret < 0) {
                        folio_put(folio);
                        if (ret == -ENOMEM)
                                break;
                        read_pages(ractl);
                        ractl->_index++;
                        i = ractl->_index + ractl->_nr_pages - index - 1;
                        continue;
                }
                if (i == nr_to_read - lookahead_size)
                        folio_set_readahead(folio);
                ractl->_workingset |= folio_test_workingset(folio);
                ractl->_nr_pages++;
        }

        /*
         * Now start the IO.  We ignore I/O errors - if the folio is not
         * uptodate then the caller will launch read_folio again, and
         * will then handle the error.
         */
        read_pages(ractl);
        filemap_invalidate_unlock_shared(mapping);
        memalloc_nofs_restore(nofs);
}
EXPORT_SYMBOL_GPL(page_cache_ra_unbounded);

/*
 * do_page_cache_ra() actually reads a chunk of disk.  It allocates
 * the pages first, then submits them for I/O. This avoids the very bad
 * behaviour which would occur if page allocations are causing VM writeback.
 * We really don't want to intermingle reads and writes like that.
 */
static void do_page_cache_ra(struct readahead_control *ractl,
                unsigned long nr_to_read, unsigned long lookahead_size)
{
        struct inode *inode = ractl->mapping->host;
        unsigned long index = readahead_index(ractl);
        loff_t isize = i_size_read(inode);
        pgoff_t end_index;      /* The last page we want to read */

        if (isize == 0)
                return;

        end_index = (isize - 1) >> PAGE_SHIFT;
        if (index > end_index)
                return;
        /* Don't read past the page containing the last byte of the file */
        if (nr_to_read > end_index - index)
                nr_to_read = end_index - index + 1;

        page_cache_ra_unbounded(ractl, nr_to_read, lookahead_size);
}

/*
 * Chunk the readahead into 2 megabyte units, so that we don't pin too much
 * memory at once.
 */
void force_page_cache_ra(struct readahead_control *ractl,
                unsigned long nr_to_read)
{
        struct address_space *mapping = ractl->mapping;
        struct file_ra_state *ra = ractl->ra;
        struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
        unsigned long max_pages, index;

        if (unlikely(!mapping->a_ops->read_folio && !mapping->a_ops->readahead))
                return;

        /*
         * If the request exceeds the readahead window, allow the read to
         * be up to the optimal hardware IO size
         */
        index = readahead_index(ractl);
        max_pages = max_t(unsigned long, bdi->io_pages, ra->ra_pages);
        nr_to_read = min_t(unsigned long, nr_to_read, max_pages);
        while (nr_to_read) {
                unsigned long this_chunk = (2 * 1024 * 1024) / PAGE_SIZE;

                if (this_chunk > nr_to_read)
                        this_chunk = nr_to_read;
                ractl->_index = index;
                do_page_cache_ra(ractl, this_chunk, 0);

                index += this_chunk;
                nr_to_read -= this_chunk;
        }
}

/*
 * Set the initial window size, round to next power of 2 and square
 * for small size, x 4 for medium, and x 2 for large
 * for 128k (32 page) max ra
 * 1-2 page = 16k, 3-4 page 32k, 5-8 page = 64k, > 8 page = 128k initial
 */
static unsigned long get_init_ra_size(unsigned long size, unsigned long max)
{
        unsigned long newsize = roundup_pow_of_two(size);

        if (newsize <= max / 32)
                newsize = newsize * 4;
        else if (newsize <= max / 4)
                newsize = newsize * 2;
        else
                newsize = max;

        return newsize;
}

/*
 *  Get the previous window size, ramp it up, and
 *  return it as the new window size.
 */
static unsigned long get_next_ra_size(struct file_ra_state *ra,
                                      unsigned long max)
{
        unsigned long cur = ra->size;

        if (cur < max / 16)
                return 4 * cur;
        if (cur <= max / 2)
                return 2 * cur;
        return max;
}

/*
 * On-demand readahead design.
 *
 * The fields in struct file_ra_state represent the most-recently-executed
 * readahead attempt:
 *
 *                        |<----- async_size ---------|
 *     |------------------- size -------------------->|
 *     |==================#===========================|
 *     ^start             ^page marked with PG_readahead
 *
 * To overlap application thinking time and disk I/O time, we do
 * `readahead pipelining': Do not wait until the application consumed all
 * readahead pages and stalled on the missing page at readahead_index;
 * Instead, submit an asynchronous readahead I/O as soon as there are
 * only async_size pages left in the readahead window. Normally async_size
 * will be equal to size, for maximum pipelining.
 *
 * In interleaved sequential reads, concurrent streams on the same fd can
 * be invalidating each other's readahead state. So we flag the new readahead
 * page at (start+size-async_size) with PG_readahead, and use it as readahead
 * indicator. The flag won't be set on already cached pages, to avoid the
 * readahead-for-nothing fuss, saving pointless page cache lookups.
 *
 * prev_pos tracks the last visited byte in the _previous_ read request.
 * It should be maintained by the caller, and will be used for detecting
 * small random reads. Note that the readahead algorithm checks loosely
 * for sequential patterns. Hence interleaved reads might be served as
 * sequential ones.
 *
 * There is a special-case: if the first page which the application tries to
 * read happens to be the first page of the file, it is assumed that a linear
 * read is about to happen and the window is immediately set to the initial size
 * based on I/O request size and the max_readahead.
 *
 * The code ramps up the readahead size aggressively at first, but slow down as
 * it approaches max_readhead.
 */

/*
 * Count contiguously cached pages from @index-1 to @index-@max,
 * this count is a conservative estimation of
 *      - length of the sequential read sequence, or
 *      - thrashing threshold in memory tight systems
 */
static pgoff_t count_history_pages(struct address_space *mapping,
                                   pgoff_t index, unsigned long max)
{
        pgoff_t head;

        rcu_read_lock();
        head = page_cache_prev_miss(mapping, index - 1, max);
        rcu_read_unlock();

        return index - 1 - head;
}

/*
 * page cache context based readahead
 */
static int try_context_readahead(struct address_space *mapping,
                                 struct file_ra_state *ra,
                                 pgoff_t index,
                                 unsigned long req_size,
                                 unsigned long max)
{
        pgoff_t size;

        size = count_history_pages(mapping, index, max);

        /*
         * not enough history pages:
         * it could be a random read
         */
        if (size <= req_size)
                return 0;

        /*
         * starts from beginning of file:
         * it is a strong indication of long-run stream (or whole-file-read)
         */
        if (size >= index)
                size *= 2;

        ra->start = index;
        ra->size = min(size + req_size, max);
        ra->async_size = 1;

        return 1;
}

static inline int ra_alloc_folio(struct readahead_control *ractl, pgoff_t index,
                pgoff_t mark, unsigned int order, gfp_t gfp)
{
        int err;
        struct folio *folio = filemap_alloc_folio(gfp, order);

        if (!folio)
                return -ENOMEM;
        mark = round_down(mark, 1UL << order);
        if (index == mark)
                folio_set_readahead(folio);
        err = filemap_add_folio(ractl->mapping, folio, index, gfp);
        if (err) {
                folio_put(folio);
                return err;
        }

        ractl->_nr_pages += 1UL << order;
        ractl->_workingset |= folio_test_workingset(folio);
        return 0;
}

void page_cache_ra_order(struct readahead_control *ractl,
                struct file_ra_state *ra, unsigned int new_order)
{
        struct address_space *mapping = ractl->mapping;
        pgoff_t index = readahead_index(ractl);
        pgoff_t limit = (i_size_read(mapping->host) - 1) >> PAGE_SHIFT;
        pgoff_t mark = index + ra->size - ra->async_size;
        unsigned int nofs;
        int err = 0;
        gfp_t gfp = readahead_gfp_mask(mapping);

        if (!mapping_large_folio_support(mapping) || ra->size < 4)
                goto fallback;

        limit = min(limit, index + ra->size - 1);

        if (new_order < MAX_PAGECACHE_ORDER) {
                new_order += 2;
                new_order = min_t(unsigned int, MAX_PAGECACHE_ORDER, new_order);
                new_order = min_t(unsigned int, new_order, ilog2(ra->size));
        }

        /* See comment in page_cache_ra_unbounded() */
        nofs = memalloc_nofs_save();
        filemap_invalidate_lock_shared(mapping);
        while (index <= limit) {
                unsigned int order = new_order;

                /* Align with smaller pages if needed */
                if (index & ((1UL << order) - 1))
                        order = __ffs(index);
                /* Don't allocate pages past EOF */
                while (index + (1UL << order) - 1 > limit)
                        order--;
                err = ra_alloc_folio(ractl, index, mark, order, gfp);
                if (err)
                        break;
                index += 1UL << order;
        }

        if (index > limit) {
                ra->size += index - limit - 1;
                ra->async_size += index - limit - 1;
        }

        read_pages(ractl);
        filemap_invalidate_unlock_shared(mapping);
        memalloc_nofs_restore(nofs);

        /*
         * If there were already pages in the page cache, then we may have
         * left some gaps.  Let the regular readahead code take care of this
         * situation.
         */
        if (!err)
                return;
fallback:
        do_page_cache_ra(ractl, ra->size, ra->async_size);
}

/*
 * A minimal readahead algorithm for trivial sequential/random reads.
 */
static void ondemand_readahead(struct readahead_control *ractl,
                struct folio *folio, unsigned long req_size)
{
        struct backing_dev_info *bdi = inode_to_bdi(ractl->mapping->host);
        struct file_ra_state *ra = ractl->ra;
        unsigned long max_pages = ra->ra_pages;
        unsigned long add_pages;
        pgoff_t index = readahead_index(ractl);
        pgoff_t expected, prev_index;
        unsigned int order = folio ? folio_order(folio) : 0;

        /*
         * If the request exceeds the readahead window, allow the read to
         * be up to the optimal hardware IO size
         */
        if (req_size > max_pages && bdi->io_pages > max_pages)
                max_pages = min(req_size, bdi->io_pages);

        /*
         * start of file
         */
        if (!index)
                goto initial_readahead;

        /*
         * It's the expected callback index, assume sequential access.
         * Ramp up sizes, and push forward the readahead window.
         */
        expected = round_down(ra->start + ra->size - ra->async_size,
                        1UL << order);
        if (index == expected || index == (ra->start + ra->size)) {
                ra->start += ra->size;
                ra->size = get_next_ra_size(ra, max_pages);
                ra->async_size = ra->size;
                goto readit;
        }

        /*
         * Hit a marked folio without valid readahead state.
         * E.g. interleaved reads.
         * Query the pagecache for async_size, which normally equals to
         * readahead size. Ramp it up and use it as the new readahead size.
         */
        if (folio) {
                pgoff_t start;

                rcu_read_lock();
                start = page_cache_next_miss(ractl->mapping, index + 1,
                                max_pages);
                rcu_read_unlock();

                if (!start || start - index > max_pages)
                        return;

                ra->start = start;
                ra->size = start - index;       /* old async_size */
                ra->size += req_size;
                ra->size = get_next_ra_size(ra, max_pages);
                ra->async_size = ra->size;
                goto readit;
        }

        /*
         * oversize read
         */
        if (req_size > max_pages)
                goto initial_readahead;

        /*
         * sequential cache miss
         * trivial case: (index - prev_index) == 1
         * unaligned reads: (index - prev_index) == 0
         */
        prev_index = (unsigned long long)ra->prev_pos >> PAGE_SHIFT;
        if (index - prev_index <= 1UL)
                goto initial_readahead;

        /*
         * Query the page cache and look for the traces(cached history pages)
         * that a sequential stream would leave behind.
         */
        if (try_context_readahead(ractl->mapping, ra, index, req_size,
                        max_pages))
                goto readit;

        /*
         * standalone, small random read
         * Read as is, and do not pollute the readahead state.
         */
        do_page_cache_ra(ractl, req_size, 0);
        return;

initial_readahead:
        ra->start = index;
        ra->size = get_init_ra_size(req_size, max_pages);
        ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;

readit:
        /*
         * Will this read hit the readahead marker made by itself?
         * If so, trigger the readahead marker hit now, and merge
         * the resulted next readahead window into the current one.
         * Take care of maximum IO pages as above.
         */
        if (index == ra->start && ra->size == ra->async_size) {
                add_pages = get_next_ra_size(ra, max_pages);
                if (ra->size + add_pages <= max_pages) {
                        ra->async_size = add_pages;
                        ra->size += add_pages;
                } else {
                        ra->size = max_pages;
                        ra->async_size = max_pages >> 1;
                }
        }

        ractl->_index = ra->start;
        page_cache_ra_order(ractl, ra, order);
}

void page_cache_sync_ra(struct readahead_control *ractl,
                unsigned long req_count)
{
        bool do_forced_ra = ractl->file && (ractl->file->f_mode & FMODE_RANDOM);

        /*
         * Even if readahead is disabled, issue this request as readahead
         * as we'll need it to satisfy the requested range. The forced
         * readahead will do the right thing and limit the read to just the
         * requested range, which we'll set to 1 page for this case.
         */
        if (!ractl->ra->ra_pages || blk_cgroup_congested()) {
                if (!ractl->file)
                        return;
                req_count = 1;
                do_forced_ra = true;
        }

        /* be dumb */
        if (do_forced_ra) {
                force_page_cache_ra(ractl, req_count);
                return;
        }

        ondemand_readahead(ractl, NULL, req_count);
}
EXPORT_SYMBOL_GPL(page_cache_sync_ra);

void page_cache_async_ra(struct readahead_control *ractl,
                struct folio *folio, unsigned long req_count)
{
        /* no readahead */
        if (!ractl->ra->ra_pages)
                return;

        /*
         * Same bit is used for PG_readahead and PG_reclaim.
         */
        if (folio_test_writeback(folio))
                return;

        folio_clear_readahead(folio);

        if (blk_cgroup_congested())
                return;

        ondemand_readahead(ractl, folio, req_count);
}
EXPORT_SYMBOL_GPL(page_cache_async_ra);

ssize_t ksys_readahead(int fd, loff_t offset, size_t count)
{
        ssize_t ret;
        struct fd f;

        ret = -EBADF;
        f = fdget(fd);
        if (!f.file || !(f.file->f_mode & FMODE_READ))
                goto out;

        /*
         * The readahead() syscall is intended to run only on files
         * that can execute readahead. If readahead is not possible
         * on this file, then we must return -EINVAL.
         */
        ret = -EINVAL;
        if (!f.file->f_mapping || !f.file->f_mapping->a_ops ||
            (!S_ISREG(file_inode(f.file)->i_mode) &&
            !S_ISBLK(file_inode(f.file)->i_mode)))
                goto out;

        ret = vfs_fadvise(f.file, offset, count, POSIX_FADV_WILLNEED);
out:
        fdput(f);
        return ret;
}

SYSCALL_DEFINE3(readahead, int, fd, loff_t, offset, size_t, count)
{
        return ksys_readahead(fd, offset, count);
}

#if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_READAHEAD)
COMPAT_SYSCALL_DEFINE4(readahead, int, fd, compat_arg_u64_dual(offset), size_t, count)
{
        return ksys_readahead(fd, compat_arg_u64_glue(offset), count);
}
#endif

/**
 * readahead_expand - Expand a readahead request
 * @ractl: The request to be expanded
 * @new_start: The revised start
 * @new_len: The revised size of the request
 *
 * Attempt to expand a readahead request outwards from the current size to the
 * specified size by inserting locked pages before and after the current window
 * to increase the size to the new window.  This may involve the insertion of
 * THPs, in which case the window may get expanded even beyond what was
 * requested.
 *
 * The algorithm will stop if it encounters a conflicting page already in the
 * pagecache and leave a smaller expansion than requested.
 *
 * The caller must check for this by examining the revised @ractl object for a
 * different expansion than was requested.
 */
void readahead_expand(struct readahead_control *ractl,
                      loff_t new_start, size_t new_len)
{
        struct address_space *mapping = ractl->mapping;
        struct file_ra_state *ra = ractl->ra;
        pgoff_t new_index, new_nr_pages;
        gfp_t gfp_mask = readahead_gfp_mask(mapping);

        new_index = new_start / PAGE_SIZE;

        /* Expand the leading edge downwards */
        while (ractl->_index > new_index) {
                unsigned long index = ractl->_index - 1;
                struct folio *folio = xa_load(&mapping->i_pages, index);

                if (folio && !xa_is_value(folio))
                        return; /* Folio apparently present */

                folio = filemap_alloc_folio(gfp_mask, 0);
                if (!folio)
                        return;
                if (filemap_add_folio(mapping, folio, index, gfp_mask) < 0) {
                        folio_put(folio);
                        return;
                }
                if (unlikely(folio_test_workingset(folio)) &&
                                !ractl->_workingset) {
                        ractl->_workingset = true;
                        psi_memstall_enter(&ractl->_pflags);
                }
                ractl->_nr_pages++;
                ractl->_index = folio->index;
        }

        new_len += new_start - readahead_pos(ractl);
        new_nr_pages = DIV_ROUND_UP(new_len, PAGE_SIZE);

        /* Expand the trailing edge upwards */
        while (ractl->_nr_pages < new_nr_pages) {
                unsigned long index = ractl->_index + ractl->_nr_pages;
                struct folio *folio = xa_load(&mapping->i_pages, index);

                if (folio && !xa_is_value(folio))
                        return; /* Folio apparently present */

                folio = filemap_alloc_folio(gfp_mask, 0);
                if (!folio)
                        return;
                if (filemap_add_folio(mapping, folio, index, gfp_mask) < 0) {
                        folio_put(folio);
                        return;
                }
                if (unlikely(folio_test_workingset(folio)) &&
                                !ractl->_workingset) {
                        ractl->_workingset = true;
                        psi_memstall_enter(&ractl->_pflags);
                }
                ractl->_nr_pages++;
                if (ra) {
                        ra->size++;
                        ra->async_size++;
                }
        }
}
EXPORT_SYMBOL(readahead_expand);