2 * Copyright (c) 1992 Terrence R. Lambert.
3 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California.
6 * This code is derived from software contributed to Berkeley by
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed by the University of
20 * California, Berkeley and its contributors.
21 * 4. Neither the name of the University nor the names of its contributors
22 * may be used to endorse or promote products derived from this software
23 * without specific prior written permission.
25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91
38 * $FreeBSD: src/sys/i386/i386/machdep.c,v 1.385.2.30 2003/05/31 08:48:05 alc Exp $
39 * $DragonFly: src/sys/i386/i386/Attic/machdep.c,v 1.72 2005/03/17 08:22:38 swildner Exp $
43 #include "use_ether.h"
46 #include "opt_atalk.h"
47 #include "opt_compat.h"
50 #include "opt_directio.h"
53 #include "opt_maxmem.h"
54 #include "opt_msgbuf.h"
55 #include "opt_perfmon.h"
57 #include "opt_userconfig.h"
59 #include <sys/param.h>
60 #include <sys/systm.h>
61 #include <sys/sysproto.h>
62 #include <sys/signalvar.h>
63 #include <sys/kernel.h>
64 #include <sys/linker.h>
65 #include <sys/malloc.h>
68 #include <sys/reboot.h>
70 #include <sys/msgbuf.h>
71 #include <sys/sysent.h>
72 #include <sys/sysctl.h>
73 #include <sys/vmmeter.h>
75 #include <sys/upcall.h>
78 #include <vm/vm_param.h>
80 #include <vm/vm_kern.h>
81 #include <vm/vm_object.h>
82 #include <vm/vm_page.h>
83 #include <vm/vm_map.h>
84 #include <vm/vm_pager.h>
85 #include <vm/vm_extern.h>
87 #include <sys/thread2.h>
95 #include <machine/cpu.h>
96 #include <machine/reg.h>
97 #include <machine/clock.h>
98 #include <machine/specialreg.h>
99 #include <machine/bootinfo.h>
100 #include <machine/ipl.h>
101 #include <machine/md_var.h>
102 #include <machine/pcb_ext.h> /* pcb.h included via sys/user.h */
103 #include <machine/globaldata.h> /* CPU_prvspace */
105 #include <machine/smp.h>
108 #include <machine/perfmon.h>
110 #include <machine/cputypes.h>
113 #include <bus/isa/i386/isa_device.h>
115 #include <i386/isa/intr_machdep.h>
116 #include <bus/isa/rtc.h>
117 #include <machine/vm86.h>
118 #include <sys/random.h>
119 #include <sys/ptrace.h>
120 #include <machine/sigframe.h>
122 extern void init386 (int first);
123 extern void dblfault_handler (void);
125 extern void printcpuinfo(void); /* XXX header file */
126 extern void finishidentcpu(void);
127 extern void panicifcpuunsupported(void);
128 extern void initializecpu(void);
130 static void cpu_startup (void *);
131 #ifndef CPU_DISABLE_SSE
132 static void set_fpregs_xmm (struct save87 *, struct savexmm *);
133 static void fill_fpregs_xmm (struct savexmm *, struct save87 *);
134 #endif /* CPU_DISABLE_SSE */
136 extern void ffs_rawread_setup(void);
137 #endif /* DIRECTIO */
138 static void init_locks(void);
140 SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL)
142 int _udatasel, _ucodesel;
145 #if defined(SWTCH_OPTIM_STATS)
146 extern int swtch_optim_stats;
147 SYSCTL_INT(_debug, OID_AUTO, swtch_optim_stats,
148 CTLFLAG_RD, &swtch_optim_stats, 0, "");
149 SYSCTL_INT(_debug, OID_AUTO, tlb_flush_count,
150 CTLFLAG_RD, &tlb_flush_count, 0, "");
157 sysctl_hw_physmem(SYSCTL_HANDLER_ARGS)
159 int error = sysctl_handle_int(oidp, 0, ctob(physmem), req);
163 SYSCTL_PROC(_hw, HW_PHYSMEM, physmem, CTLTYPE_INT|CTLFLAG_RD,
164 0, 0, sysctl_hw_physmem, "IU", "");
167 sysctl_hw_usermem(SYSCTL_HANDLER_ARGS)
169 int error = sysctl_handle_int(oidp, 0,
170 ctob(physmem - vmstats.v_wire_count), req);
174 SYSCTL_PROC(_hw, HW_USERMEM, usermem, CTLTYPE_INT|CTLFLAG_RD,
175 0, 0, sysctl_hw_usermem, "IU", "");
178 sysctl_hw_availpages(SYSCTL_HANDLER_ARGS)
180 int error = sysctl_handle_int(oidp, 0,
181 i386_btop(avail_end - avail_start), req);
185 SYSCTL_PROC(_hw, OID_AUTO, availpages, CTLTYPE_INT|CTLFLAG_RD,
186 0, 0, sysctl_hw_availpages, "I", "");
189 sysctl_machdep_msgbuf(SYSCTL_HANDLER_ARGS)
193 /* Unwind the buffer, so that it's linear (possibly starting with
194 * some initial nulls).
196 error=sysctl_handle_opaque(oidp,msgbufp->msg_ptr+msgbufp->msg_bufr,
197 msgbufp->msg_size-msgbufp->msg_bufr,req);
198 if(error) return(error);
199 if(msgbufp->msg_bufr>0) {
200 error=sysctl_handle_opaque(oidp,msgbufp->msg_ptr,
201 msgbufp->msg_bufr,req);
206 SYSCTL_PROC(_machdep, OID_AUTO, msgbuf, CTLTYPE_STRING|CTLFLAG_RD,
207 0, 0, sysctl_machdep_msgbuf, "A","Contents of kernel message buffer");
209 static int msgbuf_clear;
212 sysctl_machdep_msgbuf_clear(SYSCTL_HANDLER_ARGS)
215 error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2,
217 if (!error && req->newptr) {
218 /* Clear the buffer and reset write pointer */
219 bzero(msgbufp->msg_ptr,msgbufp->msg_size);
220 msgbufp->msg_bufr=msgbufp->msg_bufx=0;
226 SYSCTL_PROC(_machdep, OID_AUTO, msgbuf_clear, CTLTYPE_INT|CTLFLAG_RW,
227 &msgbuf_clear, 0, sysctl_machdep_msgbuf_clear, "I",
228 "Clear kernel message buffer");
231 vm_paddr_t Maxmem = 0;
234 vm_paddr_t phys_avail[10];
236 /* must be 2 less so 0 0 can signal end of chunks */
237 #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(vm_offset_t)) - 2)
239 static vm_offset_t buffer_sva, buffer_eva;
240 vm_offset_t clean_sva, clean_eva;
241 static vm_offset_t pager_sva, pager_eva;
242 static struct trapframe proc0_tf;
254 if (boothowto & RB_VERBOSE)
258 * Good {morning,afternoon,evening,night}.
260 printf("%s", version);
263 panicifcpuunsupported();
267 printf("real memory = %llu (%lluK bytes)\n", ptoa(Maxmem), ptoa(Maxmem) / 1024);
269 * Display any holes after the first chunk of extended memory.
274 printf("Physical memory chunk(s):\n");
275 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) {
276 vm_paddr_t size1 = phys_avail[indx + 1] - phys_avail[indx];
278 printf("0x%08llx - 0x%08llx, %llu bytes (%llu pages)\n",
279 phys_avail[indx], phys_avail[indx + 1] - 1, size1,
285 * Allocate space for system data structures.
286 * The first available kernel virtual address is in "v".
287 * As pages of kernel virtual memory are allocated, "v" is incremented.
288 * As pages of memory are allocated and cleared,
289 * "firstaddr" is incremented.
290 * An index into the kernel page table corresponding to the
291 * virtual memory address maintained in "v" is kept in "mapaddr".
295 * Make two passes. The first pass calculates how much memory is
296 * needed and allocates it. The second pass assigns virtual
297 * addresses to the various data structures.
301 v = (caddr_t)firstaddr;
303 #define valloc(name, type, num) \
304 (name) = (type *)v; v = (caddr_t)((name)+(num))
305 #define valloclim(name, type, num, lim) \
306 (name) = (type *)v; v = (caddr_t)((lim) = ((name)+(num)))
309 * The nominal buffer size (and minimum KVA allocation) is BKVASIZE.
310 * For the first 64MB of ram nominally allocate sufficient buffers to
311 * cover 1/4 of our ram. Beyond the first 64MB allocate additional
312 * buffers to cover 1/20 of our ram over 64MB. When auto-sizing
313 * the buffer cache we limit the eventual kva reservation to
316 * factor represents the 1/4 x ram conversion.
319 int factor = 4 * BKVASIZE / 1024;
320 int kbytes = physmem * (PAGE_SIZE / 1024);
324 nbuf += min((kbytes - 4096) / factor, 65536 / factor);
326 nbuf += (kbytes - 65536) * 2 / (factor * 5);
327 if (maxbcache && nbuf > maxbcache / BKVASIZE)
328 nbuf = maxbcache / BKVASIZE;
332 * Do not allow the buffer_map to be more then 1/2 the size of the
335 if (nbuf > (kernel_map->max_offset - kernel_map->min_offset) /
337 nbuf = (kernel_map->max_offset - kernel_map->min_offset) /
339 printf("Warning: nbufs capped at %d\n", nbuf);
342 nswbuf = max(min(nbuf/4, 256), 16);
344 if (nswbuf < NSWBUF_MIN)
351 valloc(swbuf, struct buf, nswbuf);
352 valloc(buf, struct buf, nbuf);
356 * End of first pass, size has been calculated so allocate memory
358 if (firstaddr == 0) {
359 size = (vm_size_t)(v - firstaddr);
360 firstaddr = (int)kmem_alloc(kernel_map, round_page(size));
362 panic("startup: no room for tables");
367 * End of second pass, addresses have been assigned
369 if ((vm_size_t)(v - firstaddr) != size)
370 panic("startup: table size inconsistency");
372 clean_map = kmem_suballoc(kernel_map, &clean_sva, &clean_eva,
373 (nbuf*BKVASIZE) + (nswbuf*MAXPHYS) + pager_map_size);
374 buffer_map = kmem_suballoc(clean_map, &buffer_sva, &buffer_eva,
376 buffer_map->system_map = 1;
377 pager_map = kmem_suballoc(clean_map, &pager_sva, &pager_eva,
378 (nswbuf*MAXPHYS) + pager_map_size);
379 pager_map->system_map = 1;
380 exec_map = kmem_suballoc(kernel_map, &minaddr, &maxaddr,
381 (16*(ARG_MAX+(PAGE_SIZE*3))));
383 #if defined(USERCONFIG)
385 cninit(); /* the preferred console may have changed */
388 printf("avail memory = %u (%uK bytes)\n", ptoa(vmstats.v_free_count),
389 ptoa(vmstats.v_free_count) / 1024);
392 * Set up buffers, so they can be used to read disk labels.
395 vm_pager_bufferinit();
399 * OK, enough kmem_alloc/malloc state should be up, lets get on with it!
401 mp_start(); /* fire up the APs and APICs */
408 * Send an interrupt to process.
410 * Stack is set up to allow sigcode stored
411 * at top to call routine, followed by kcall
412 * to sigreturn routine below. After sigreturn
413 * resets the signal mask, the stack, and the
414 * frame pointer, it returns to the user
418 sendsig(catcher, sig, mask, code)
424 struct proc *p = curproc;
425 struct trapframe *regs;
426 struct sigacts *psp = p->p_sigacts;
427 struct sigframe sf, *sfp;
430 regs = p->p_md.md_regs;
431 oonstack = (p->p_sigstk.ss_flags & SS_ONSTACK) ? 1 : 0;
433 /* save user context */
434 bzero(&sf, sizeof(struct sigframe));
435 sf.sf_uc.uc_sigmask = *mask;
436 sf.sf_uc.uc_stack = p->p_sigstk;
437 sf.sf_uc.uc_mcontext.mc_onstack = oonstack;
438 sf.sf_uc.uc_mcontext.mc_gs = rgs();
439 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(struct trapframe));
441 /* Allocate and validate space for the signal handler context. */
442 if ((p->p_flag & P_ALTSTACK) != 0 && !oonstack &&
443 SIGISMEMBER(psp->ps_sigonstack, sig)) {
444 sfp = (struct sigframe *)(p->p_sigstk.ss_sp +
445 p->p_sigstk.ss_size - sizeof(struct sigframe));
446 p->p_sigstk.ss_flags |= SS_ONSTACK;
449 sfp = (struct sigframe *)regs->tf_esp - 1;
451 /* Translate the signal is appropriate */
452 if (p->p_sysent->sv_sigtbl) {
453 if (sig <= p->p_sysent->sv_sigsize)
454 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)];
457 /* Build the argument list for the signal handler. */
459 sf.sf_ucontext = (register_t)&sfp->sf_uc;
460 if (SIGISMEMBER(p->p_sigacts->ps_siginfo, sig)) {
461 /* Signal handler installed with SA_SIGINFO. */
462 sf.sf_siginfo = (register_t)&sfp->sf_si;
463 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;
465 /* fill siginfo structure */
466 sf.sf_si.si_signo = sig;
467 sf.sf_si.si_code = code;
468 sf.sf_si.si_addr = (void*)regs->tf_err;
471 /* Old FreeBSD-style arguments. */
472 sf.sf_siginfo = code;
473 sf.sf_addr = regs->tf_err;
474 sf.sf_ahu.sf_handler = catcher;
478 * If we're a vm86 process, we want to save the segment registers.
479 * We also change eflags to be our emulated eflags, not the actual
482 if (regs->tf_eflags & PSL_VM) {
483 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
484 struct vm86_kernel *vm86 = &p->p_thread->td_pcb->pcb_ext->ext_vm86;
486 sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs;
487 sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs;
488 sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es;
489 sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds;
491 if (vm86->vm86_has_vme == 0)
492 sf.sf_uc.uc_mcontext.mc_eflags =
493 (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
494 (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));
497 * Clear PSL_NT to inhibit T_TSSFLT faults on return from
498 * syscalls made by the signal handler. This just avoids
499 * wasting time for our lazy fixup of such faults. PSL_NT
500 * does nothing in vm86 mode, but vm86 programs can set it
501 * almost legitimately in probes for old cpu types.
503 tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
507 * Copy the sigframe out to the user's stack.
509 if (copyout(&sf, sfp, sizeof(struct sigframe)) != 0) {
511 * Something is wrong with the stack pointer.
512 * ...Kill the process.
517 regs->tf_esp = (int)sfp;
518 regs->tf_eip = PS_STRINGS - *(p->p_sysent->sv_szsigcode);
519 regs->tf_eflags &= ~PSL_T;
520 regs->tf_cs = _ucodesel;
521 regs->tf_ds = _udatasel;
522 regs->tf_es = _udatasel;
523 regs->tf_fs = _udatasel;
524 regs->tf_ss = _udatasel;
528 * sigreturn(ucontext_t *sigcntxp)
530 * System call to cleanup state after a signal
531 * has been taken. Reset signal mask and
532 * stack state from context left by sendsig (above).
533 * Return to previous pc and psl as specified by
534 * context left by sendsig. Check carefully to
535 * make sure that the user has not modified the
536 * state to gain improper privileges.
538 #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0)
539 #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL)
542 sigreturn(struct sigreturn_args *uap)
544 struct proc *p = curproc;
545 struct trapframe *regs;
551 if (!useracc((caddr_t)ucp, sizeof(ucontext_t), VM_PROT_READ))
554 regs = p->p_md.md_regs;
555 eflags = ucp->uc_mcontext.mc_eflags;
557 if (eflags & PSL_VM) {
558 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
559 struct vm86_kernel *vm86;
562 * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
563 * set up the vm86 area, and we can't enter vm86 mode.
565 if (p->p_thread->td_pcb->pcb_ext == 0)
567 vm86 = &p->p_thread->td_pcb->pcb_ext->ext_vm86;
568 if (vm86->vm86_inited == 0)
571 /* go back to user mode if both flags are set */
572 if ((eflags & PSL_VIP) && (eflags & PSL_VIF))
573 trapsignal(p, SIGBUS, 0);
575 if (vm86->vm86_has_vme) {
576 eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
577 (eflags & VME_USERCHANGE) | PSL_VM;
579 vm86->vm86_eflags = eflags; /* save VIF, VIP */
580 eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM;
582 bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe));
583 tf->tf_eflags = eflags;
584 tf->tf_vm86_ds = tf->tf_ds;
585 tf->tf_vm86_es = tf->tf_es;
586 tf->tf_vm86_fs = tf->tf_fs;
587 tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs;
588 tf->tf_ds = _udatasel;
589 tf->tf_es = _udatasel;
590 tf->tf_fs = _udatasel;
593 * Don't allow users to change privileged or reserved flags.
596 * XXX do allow users to change the privileged flag PSL_RF.
597 * The cpu sets PSL_RF in tf_eflags for faults. Debuggers
598 * should sometimes set it there too. tf_eflags is kept in
599 * the signal context during signal handling and there is no
600 * other place to remember it, so the PSL_RF bit may be
601 * corrupted by the signal handler without us knowing.
602 * Corruption of the PSL_RF bit at worst causes one more or
603 * one less debugger trap, so allowing it is fairly harmless.
605 if (!EFL_SECURE(eflags & ~PSL_RF, regs->tf_eflags & ~PSL_RF)) {
606 printf("sigreturn: eflags = 0x%x\n", eflags);
611 * Don't allow users to load a valid privileged %cs. Let the
612 * hardware check for invalid selectors, excess privilege in
613 * other selectors, invalid %eip's and invalid %esp's.
615 cs = ucp->uc_mcontext.mc_cs;
616 if (!CS_SECURE(cs)) {
617 printf("sigreturn: cs = 0x%x\n", cs);
618 trapsignal(p, SIGBUS, T_PROTFLT);
621 bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(struct trapframe));
624 if (ucp->uc_mcontext.mc_onstack & 1)
625 p->p_sigstk.ss_flags |= SS_ONSTACK;
627 p->p_sigstk.ss_flags &= ~SS_ONSTACK;
629 p->p_sigmask = ucp->uc_sigmask;
630 SIG_CANTMASK(p->p_sigmask);
635 * Stack frame on entry to function. %eax will contain the function vector,
636 * %ecx will contain the function data. flags, ecx, and eax will have
637 * already been pushed on the stack.
648 sendupcall(struct vmupcall *vu, int morepending)
650 struct proc *p = curproc;
651 struct trapframe *regs;
652 struct upcall upcall;
653 struct upc_frame upc_frame;
657 * Get the upcall data structure
659 if (copyin(p->p_upcall, &upcall, sizeof(upcall)) ||
660 copyin((char *)upcall.upc_uthread + upcall.upc_critoff, &crit_count, sizeof(int))
663 printf("bad upcall address\n");
668 * If the data structure is already marked pending or has a critical
669 * section count, mark the data structure as pending and return
670 * without doing an upcall. vu_pending is left set.
672 if (upcall.upc_pending || crit_count >= vu->vu_pending) {
673 if (upcall.upc_pending < vu->vu_pending) {
674 upcall.upc_pending = vu->vu_pending;
675 copyout(&upcall.upc_pending, &p->p_upcall->upc_pending,
676 sizeof(upcall.upc_pending));
682 * We can run this upcall now, clear vu_pending.
684 * Bump our critical section count and set or clear the
685 * user pending flag depending on whether more upcalls are
686 * pending. The user will be responsible for calling
687 * upc_dispatch(-1) to process remaining upcalls.
690 upcall.upc_pending = morepending;
691 crit_count += TDPRI_CRIT;
692 copyout(&upcall.upc_pending, &p->p_upcall->upc_pending,
693 sizeof(upcall.upc_pending));
694 copyout(&crit_count, (char *)upcall.upc_uthread + upcall.upc_critoff,
698 * Construct a stack frame and issue the upcall
700 regs = p->p_md.md_regs;
701 upc_frame.eax = regs->tf_eax;
702 upc_frame.ecx = regs->tf_ecx;
703 upc_frame.edx = regs->tf_edx;
704 upc_frame.flags = regs->tf_eflags;
705 upc_frame.oldip = regs->tf_eip;
706 if (copyout(&upc_frame, (void *)(regs->tf_esp - sizeof(upc_frame)),
707 sizeof(upc_frame)) != 0) {
708 printf("bad stack on upcall\n");
710 regs->tf_eax = (register_t)vu->vu_func;
711 regs->tf_ecx = (register_t)vu->vu_data;
712 regs->tf_edx = (register_t)p->p_upcall;
713 regs->tf_eip = (register_t)vu->vu_ctx;
714 regs->tf_esp -= sizeof(upc_frame);
719 * fetchupcall occurs in the context of a system call, which means that
720 * we have to return EJUSTRETURN in order to prevent eax and edx from
721 * being overwritten by the syscall return value.
723 * if vu is not NULL we return the new context in %edx, the new data in %ecx,
724 * and the function pointer in %eax.
727 fetchupcall (struct vmupcall *vu, int morepending, void *rsp)
729 struct upc_frame upc_frame;
731 struct trapframe *regs;
733 struct upcall upcall;
737 regs = p->p_md.md_regs;
739 error = copyout(&morepending, &p->p_upcall->upc_pending, sizeof(int));
743 * This jumps us to the next ready context.
746 error = copyin(p->p_upcall, &upcall, sizeof(upcall));
749 error = copyin((char *)upcall.upc_uthread + upcall.upc_critoff, &crit_count, sizeof(int));
750 crit_count += TDPRI_CRIT;
752 error = copyout(&crit_count, (char *)upcall.upc_uthread + upcall.upc_critoff, sizeof(int));
753 regs->tf_eax = (register_t)vu->vu_func;
754 regs->tf_ecx = (register_t)vu->vu_data;
755 regs->tf_edx = (register_t)p->p_upcall;
756 regs->tf_eip = (register_t)vu->vu_ctx;
757 regs->tf_esp = (register_t)rsp;
760 * This returns us to the originally interrupted code.
762 error = copyin(rsp, &upc_frame, sizeof(upc_frame));
763 regs->tf_eax = upc_frame.eax;
764 regs->tf_ecx = upc_frame.ecx;
765 regs->tf_edx = upc_frame.edx;
766 regs->tf_eflags = (regs->tf_eflags & ~PSL_USERCHANGE) |
767 (upc_frame.flags & PSL_USERCHANGE);
768 regs->tf_eip = upc_frame.oldip;
769 regs->tf_esp = (register_t)((char *)rsp + sizeof(upc_frame));
778 * Machine dependent boot() routine
780 * I haven't seen anything to put here yet
781 * Possibly some stuff might be grafted back here from boot()
789 * Shutdown the CPU as much as possible
799 * cpu_idle() represents the idle LWKT. You cannot return from this function
800 * (unless you want to blow things up!). Instead we look for runnable threads
801 * and loop or halt as appropriate. Giant is not held on entry to the thread.
803 * The main loop is entered with a critical section held, we must release
804 * the critical section before doing anything else. lwkt_switch() will
805 * check for pending interrupts due to entering and exiting its own
808 * Note on cpu_idle_hlt: On an SMP system we rely on a scheduler IPI
809 * to wake a HLTed cpu up. However, there are cases where the idlethread
810 * will be entered with the possibility that no IPI will occur and in such
811 * cases lwkt_switch() sets TDF_IDLE_NOHLT.
813 static int cpu_idle_hlt = 1;
814 static int cpu_idle_hltcnt;
815 static int cpu_idle_spincnt;
816 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hlt, CTLFLAG_RW,
817 &cpu_idle_hlt, 0, "Idle loop HLT enable");
818 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hltcnt, CTLFLAG_RW,
819 &cpu_idle_hltcnt, 0, "Idle loop entry halts");
820 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_spincnt, CTLFLAG_RW,
821 &cpu_idle_spincnt, 0, "Idle loop entry spins");
824 cpu_idle_default_hook(void)
827 * We must guarentee that hlt is exactly the instruction
830 __asm __volatile("sti; hlt");
833 /* Other subsystems (e.g., ACPI) can hook this later. */
834 void (*cpu_idle_hook)(void) = cpu_idle_default_hook;
839 struct thread *td = curthread;
842 KKASSERT(td->td_pri < TDPRI_CRIT);
845 * See if there are any LWKTs ready to go.
850 * If we are going to halt call splz unconditionally after
851 * CLIing to catch any interrupt races. Note that we are
852 * at SPL0 and interrupts are enabled.
854 if (cpu_idle_hlt && !lwkt_runnable() &&
855 (td->td_flags & TDF_IDLE_NOHLT) == 0) {
856 __asm __volatile("cli");
858 if (!lwkt_runnable())
862 __asm __volatile("pause");
866 td->td_flags &= ~TDF_IDLE_NOHLT;
869 __asm __volatile("sti; pause");
871 __asm __volatile("sti");
879 * Clear registers on exec
882 setregs(p, entry, stack, ps_strings)
888 struct trapframe *regs = p->p_md.md_regs;
889 struct pcb *pcb = p->p_thread->td_pcb;
891 /* Reset pc->pcb_gs and %gs before possibly invalidating it. */
892 pcb->pcb_gs = _udatasel;
895 /* was i386_user_cleanup() in NetBSD */
898 bzero((char *)regs, sizeof(struct trapframe));
899 regs->tf_eip = entry;
900 regs->tf_esp = stack;
901 regs->tf_eflags = PSL_USER | (regs->tf_eflags & PSL_T);
902 regs->tf_ss = _udatasel;
903 regs->tf_ds = _udatasel;
904 regs->tf_es = _udatasel;
905 regs->tf_fs = _udatasel;
906 regs->tf_cs = _ucodesel;
908 /* PS_STRINGS value for BSD/OS binaries. It is 0 for non-BSD/OS. */
909 regs->tf_ebx = ps_strings;
912 * Reset the hardware debug registers if they were in use.
913 * They won't have any meaning for the newly exec'd process.
915 if (pcb->pcb_flags & PCB_DBREGS) {
922 if (pcb == curthread->td_pcb) {
924 * Clear the debug registers on the running
925 * CPU, otherwise they will end up affecting
926 * the next process we switch to.
930 pcb->pcb_flags &= ~PCB_DBREGS;
934 * Initialize the math emulator (if any) for the current process.
935 * Actually, just clear the bit that says that the emulator has
936 * been initialized. Initialization is delayed until the process
937 * traps to the emulator (if it is done at all) mainly because
938 * emulators don't provide an entry point for initialization.
940 p->p_thread->td_pcb->pcb_flags &= ~FP_SOFTFP;
943 * note: do not set CR0_TS here. npxinit() must do it after clearing
944 * gd_npxthread. Otherwise a preemptive interrupt thread may panic
948 load_cr0(rcr0() | CR0_MP);
951 /* Initialize the npx (if any) for the current process. */
952 npxinit(__INITIAL_NPXCW__);
957 * note: linux emulator needs edx to be 0x0 on entry, which is
958 * handled in execve simply by setting the 64 bit syscall
969 cr0 |= CR0_NE; /* Done by npxinit() */
970 cr0 |= CR0_MP | CR0_TS; /* Done at every execve() too. */
972 if (cpu_class != CPUCLASS_386)
974 cr0 |= CR0_WP | CR0_AM;
980 sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS)
983 error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2,
985 if (!error && req->newptr)
990 SYSCTL_PROC(_machdep, CPU_ADJKERNTZ, adjkerntz, CTLTYPE_INT|CTLFLAG_RW,
991 &adjkerntz, 0, sysctl_machdep_adjkerntz, "I", "");
993 SYSCTL_INT(_machdep, CPU_DISRTCSET, disable_rtc_set,
994 CTLFLAG_RW, &disable_rtc_set, 0, "");
996 SYSCTL_STRUCT(_machdep, CPU_BOOTINFO, bootinfo,
997 CTLFLAG_RD, &bootinfo, bootinfo, "");
999 SYSCTL_INT(_machdep, CPU_WALLCLOCK, wall_cmos_clock,
1000 CTLFLAG_RW, &wall_cmos_clock, 0, "");
1002 extern u_long bootdev; /* not a dev_t - encoding is different */
1003 SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev,
1004 CTLFLAG_RD, &bootdev, 0, "Boot device (not in dev_t format)");
1007 * Initialize 386 and configure to run kernel
1011 * Initialize segments & interrupt table
1015 union descriptor gdt[NGDT * MAXCPU]; /* global descriptor table */
1016 static struct gate_descriptor idt0[NIDT];
1017 struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */
1018 union descriptor ldt[NLDT]; /* local descriptor table */
1020 /* table descriptors - used to load tables by cpu */
1021 struct region_descriptor r_gdt, r_idt;
1023 #if defined(I586_CPU) && !defined(NO_F00F_HACK)
1024 extern int has_f00f_bug;
1027 static struct i386tss dblfault_tss;
1028 static char dblfault_stack[PAGE_SIZE];
1030 extern struct user *proc0paddr;
1033 /* software prototypes -- in more palatable form */
1034 struct soft_segment_descriptor gdt_segs[] = {
1035 /* GNULL_SEL 0 Null Descriptor */
1036 { 0x0, /* segment base address */
1038 0, /* segment type */
1039 0, /* segment descriptor priority level */
1040 0, /* segment descriptor present */
1042 0, /* default 32 vs 16 bit size */
1043 0 /* limit granularity (byte/page units)*/ },
1044 /* GCODE_SEL 1 Code Descriptor for kernel */
1045 { 0x0, /* segment base address */
1046 0xfffff, /* length - all address space */
1047 SDT_MEMERA, /* segment type */
1048 0, /* segment descriptor priority level */
1049 1, /* segment descriptor present */
1051 1, /* default 32 vs 16 bit size */
1052 1 /* limit granularity (byte/page units)*/ },
1053 /* GDATA_SEL 2 Data Descriptor for kernel */
1054 { 0x0, /* segment base address */
1055 0xfffff, /* length - all address space */
1056 SDT_MEMRWA, /* segment type */
1057 0, /* segment descriptor priority level */
1058 1, /* segment descriptor present */
1060 1, /* default 32 vs 16 bit size */
1061 1 /* limit granularity (byte/page units)*/ },
1062 /* GPRIV_SEL 3 SMP Per-Processor Private Data Descriptor */
1063 { 0x0, /* segment base address */
1064 0xfffff, /* length - all address space */
1065 SDT_MEMRWA, /* segment type */
1066 0, /* segment descriptor priority level */
1067 1, /* segment descriptor present */
1069 1, /* default 32 vs 16 bit size */
1070 1 /* limit granularity (byte/page units)*/ },
1071 /* GPROC0_SEL 4 Proc 0 Tss Descriptor */
1073 0x0, /* segment base address */
1074 sizeof(struct i386tss)-1,/* length - all address space */
1075 SDT_SYS386TSS, /* segment type */
1076 0, /* segment descriptor priority level */
1077 1, /* segment descriptor present */
1079 0, /* unused - default 32 vs 16 bit size */
1080 0 /* limit granularity (byte/page units)*/ },
1081 /* GLDT_SEL 5 LDT Descriptor */
1082 { (int) ldt, /* segment base address */
1083 sizeof(ldt)-1, /* length - all address space */
1084 SDT_SYSLDT, /* segment type */
1085 SEL_UPL, /* segment descriptor priority level */
1086 1, /* segment descriptor present */
1088 0, /* unused - default 32 vs 16 bit size */
1089 0 /* limit granularity (byte/page units)*/ },
1090 /* GUSERLDT_SEL 6 User LDT Descriptor per process */
1091 { (int) ldt, /* segment base address */
1092 (512 * sizeof(union descriptor)-1), /* length */
1093 SDT_SYSLDT, /* segment type */
1094 0, /* segment descriptor priority level */
1095 1, /* segment descriptor present */
1097 0, /* unused - default 32 vs 16 bit size */
1098 0 /* limit granularity (byte/page units)*/ },
1099 /* GTGATE_SEL 7 Null Descriptor - Placeholder */
1100 { 0x0, /* segment base address */
1101 0x0, /* length - all address space */
1102 0, /* segment type */
1103 0, /* segment descriptor priority level */
1104 0, /* segment descriptor present */
1106 0, /* default 32 vs 16 bit size */
1107 0 /* limit granularity (byte/page units)*/ },
1108 /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */
1109 { 0x400, /* segment base address */
1110 0xfffff, /* length */
1111 SDT_MEMRWA, /* segment type */
1112 0, /* segment descriptor priority level */
1113 1, /* segment descriptor present */
1115 1, /* default 32 vs 16 bit size */
1116 1 /* limit granularity (byte/page units)*/ },
1117 /* GPANIC_SEL 9 Panic Tss Descriptor */
1118 { (int) &dblfault_tss, /* segment base address */
1119 sizeof(struct i386tss)-1,/* length - all address space */
1120 SDT_SYS386TSS, /* segment type */
1121 0, /* segment descriptor priority level */
1122 1, /* segment descriptor present */
1124 0, /* unused - default 32 vs 16 bit size */
1125 0 /* limit granularity (byte/page units)*/ },
1126 /* GBIOSCODE32_SEL 10 BIOS 32-bit interface (32bit Code) */
1127 { 0, /* segment base address (overwritten) */
1128 0xfffff, /* length */
1129 SDT_MEMERA, /* segment type */
1130 0, /* segment descriptor priority level */
1131 1, /* segment descriptor present */
1133 0, /* default 32 vs 16 bit size */
1134 1 /* limit granularity (byte/page units)*/ },
1135 /* GBIOSCODE16_SEL 11 BIOS 32-bit interface (16bit Code) */
1136 { 0, /* segment base address (overwritten) */
1137 0xfffff, /* length */
1138 SDT_MEMERA, /* segment type */
1139 0, /* segment descriptor priority level */
1140 1, /* segment descriptor present */
1142 0, /* default 32 vs 16 bit size */
1143 1 /* limit granularity (byte/page units)*/ },
1144 /* GBIOSDATA_SEL 12 BIOS 32-bit interface (Data) */
1145 { 0, /* segment base address (overwritten) */
1146 0xfffff, /* length */
1147 SDT_MEMRWA, /* segment type */
1148 0, /* segment descriptor priority level */
1149 1, /* segment descriptor present */
1151 1, /* default 32 vs 16 bit size */
1152 1 /* limit granularity (byte/page units)*/ },
1153 /* GBIOSUTIL_SEL 13 BIOS 16-bit interface (Utility) */
1154 { 0, /* segment base address (overwritten) */
1155 0xfffff, /* length */
1156 SDT_MEMRWA, /* segment type */
1157 0, /* segment descriptor priority level */
1158 1, /* segment descriptor present */
1160 0, /* default 32 vs 16 bit size */
1161 1 /* limit granularity (byte/page units)*/ },
1162 /* GBIOSARGS_SEL 14 BIOS 16-bit interface (Arguments) */
1163 { 0, /* segment base address (overwritten) */
1164 0xfffff, /* length */
1165 SDT_MEMRWA, /* segment type */
1166 0, /* segment descriptor priority level */
1167 1, /* segment descriptor present */
1169 0, /* default 32 vs 16 bit size */
1170 1 /* limit granularity (byte/page units)*/ },
1171 /* GTLS_START 15 TLS */
1172 { 0x0, /* segment base address */
1174 0, /* segment type */
1175 0, /* segment descriptor priority level */
1176 0, /* segment descriptor present */
1178 0, /* default 32 vs 16 bit size */
1179 0 /* limit granularity (byte/page units)*/ },
1180 /* GTLS_START+1 16 TLS */
1181 { 0x0, /* segment base address */
1183 0, /* segment type */
1184 0, /* segment descriptor priority level */
1185 0, /* segment descriptor present */
1187 0, /* default 32 vs 16 bit size */
1188 0 /* limit granularity (byte/page units)*/ },
1189 /* GTLS_END 17 TLS */
1190 { 0x0, /* segment base address */
1192 0, /* segment type */
1193 0, /* segment descriptor priority level */
1194 0, /* segment descriptor present */
1196 0, /* default 32 vs 16 bit size */
1197 0 /* limit granularity (byte/page units)*/ },
1200 static struct soft_segment_descriptor ldt_segs[] = {
1201 /* Null Descriptor - overwritten by call gate */
1202 { 0x0, /* segment base address */
1203 0x0, /* length - all address space */
1204 0, /* segment type */
1205 0, /* segment descriptor priority level */
1206 0, /* segment descriptor present */
1208 0, /* default 32 vs 16 bit size */
1209 0 /* limit granularity (byte/page units)*/ },
1210 /* Null Descriptor - overwritten by call gate */
1211 { 0x0, /* segment base address */
1212 0x0, /* length - all address space */
1213 0, /* segment type */
1214 0, /* segment descriptor priority level */
1215 0, /* segment descriptor present */
1217 0, /* default 32 vs 16 bit size */
1218 0 /* limit granularity (byte/page units)*/ },
1219 /* Null Descriptor - overwritten by call gate */
1220 { 0x0, /* segment base address */
1221 0x0, /* length - all address space */
1222 0, /* segment type */
1223 0, /* segment descriptor priority level */
1224 0, /* segment descriptor present */
1226 0, /* default 32 vs 16 bit size */
1227 0 /* limit granularity (byte/page units)*/ },
1228 /* Code Descriptor for user */
1229 { 0x0, /* segment base address */
1230 0xfffff, /* length - all address space */
1231 SDT_MEMERA, /* segment type */
1232 SEL_UPL, /* segment descriptor priority level */
1233 1, /* segment descriptor present */
1235 1, /* default 32 vs 16 bit size */
1236 1 /* limit granularity (byte/page units)*/ },
1237 /* Null Descriptor - overwritten by call gate */
1238 { 0x0, /* segment base address */
1239 0x0, /* length - all address space */
1240 0, /* segment type */
1241 0, /* segment descriptor priority level */
1242 0, /* segment descriptor present */
1244 0, /* default 32 vs 16 bit size */
1245 0 /* limit granularity (byte/page units)*/ },
1246 /* Data Descriptor for user */
1247 { 0x0, /* segment base address */
1248 0xfffff, /* length - all address space */
1249 SDT_MEMRWA, /* segment type */
1250 SEL_UPL, /* segment descriptor priority level */
1251 1, /* segment descriptor present */
1253 1, /* default 32 vs 16 bit size */
1254 1 /* limit granularity (byte/page units)*/ },
1258 setidt(idx, func, typ, dpl, selec)
1265 struct gate_descriptor *ip;
1268 ip->gd_looffset = (int)func;
1269 ip->gd_selector = selec;
1275 ip->gd_hioffset = ((int)func)>>16 ;
1278 #define IDTVEC(name) __CONCAT(X,name)
1281 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl),
1282 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm),
1283 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot),
1284 IDTVEC(page), IDTVEC(mchk), IDTVEC(fpu), IDTVEC(align),
1285 IDTVEC(xmm), IDTVEC(syscall),
1288 IDTVEC(int0x80_syscall), IDTVEC(int0x81_syscall),
1289 IDTVEC(int0x82_syscall);
1291 #ifdef DEBUG_INTERRUPTS
1292 extern inthand_t *Xrsvdary[256];
1297 struct segment_descriptor *sd;
1298 struct soft_segment_descriptor *ssd;
1300 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase;
1301 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit;
1302 ssd->ssd_type = sd->sd_type;
1303 ssd->ssd_dpl = sd->sd_dpl;
1304 ssd->ssd_p = sd->sd_p;
1305 ssd->ssd_def32 = sd->sd_def32;
1306 ssd->ssd_gran = sd->sd_gran;
1309 #define PHYSMAP_SIZE (2 * 8)
1312 * Populate the (physmap) array with base/bound pairs describing the
1313 * available physical memory in the system, then test this memory and
1314 * build the phys_avail array describing the actually-available memory.
1316 * If we cannot accurately determine the physical memory map, then use
1317 * value from the 0xE801 call, and failing that, the RTC.
1319 * Total memory size may be set by the kernel environment variable
1320 * hw.physmem or the compile-time define MAXMEM.
1323 getmemsize(int first)
1325 int i, physmap_idx, pa_indx;
1327 u_int basemem, extmem;
1328 struct vm86frame vmf;
1329 struct vm86context vmc;
1330 vm_offset_t pa, physmap[PHYSMAP_SIZE];
1338 quad_t dcons_addr, dcons_size;
1341 TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12);
1342 bzero(&vmf, sizeof(struct vm86frame));
1343 bzero(physmap, sizeof(physmap));
1347 * Some newer BIOSes has broken INT 12H implementation which cause
1348 * kernel panic immediately. In this case, we need to scan SMAP
1349 * with INT 15:E820 first, then determine base memory size.
1351 if (hasbrokenint12) {
1356 * Perform "base memory" related probes & setup. If we get a crazy
1357 * value give the bios some scribble space just in case.
1359 vm86_intcall(0x12, &vmf);
1360 basemem = vmf.vmf_ax;
1361 if (basemem > 640) {
1362 printf("Preposterous BIOS basemem of %uK, "
1363 "truncating to < 640K\n", basemem);
1368 * XXX if biosbasemem is now < 640, there is a `hole'
1369 * between the end of base memory and the start of
1370 * ISA memory. The hole may be empty or it may
1371 * contain BIOS code or data. Map it read/write so
1372 * that the BIOS can write to it. (Memory from 0 to
1373 * the physical end of the kernel is mapped read-only
1374 * to begin with and then parts of it are remapped.
1375 * The parts that aren't remapped form holes that
1376 * remain read-only and are unused by the kernel.
1377 * The base memory area is below the physical end of
1378 * the kernel and right now forms a read-only hole.
1379 * The part of it from PAGE_SIZE to
1380 * (trunc_page(biosbasemem * 1024) - 1) will be
1381 * remapped and used by the kernel later.)
1383 * This code is similar to the code used in
1384 * pmap_mapdev, but since no memory needs to be
1385 * allocated we simply change the mapping.
1387 for (pa = trunc_page(basemem * 1024);
1388 pa < ISA_HOLE_START; pa += PAGE_SIZE) {
1389 pte = vtopte(pa + KERNBASE);
1390 *pte = pa | PG_RW | PG_V;
1394 * if basemem != 640, map pages r/w into vm86 page table so
1395 * that the bios can scribble on it.
1398 for (i = basemem / 4; i < 160; i++)
1399 pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U;
1403 * map page 1 R/W into the kernel page table so we can use it
1404 * as a buffer. The kernel will unmap this page later.
1406 pte = vtopte(KERNBASE + (1 << PAGE_SHIFT));
1407 *pte = (1 << PAGE_SHIFT) | PG_RW | PG_V;
1410 * get memory map with INT 15:E820
1412 #define SMAPSIZ sizeof(*smap)
1413 #define SMAP_SIG 0x534D4150 /* 'SMAP' */
1416 smap = (void *)vm86_addpage(&vmc, 1, KERNBASE + (1 << PAGE_SHIFT));
1417 vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di);
1422 vmf.vmf_eax = 0xE820;
1423 vmf.vmf_edx = SMAP_SIG;
1424 vmf.vmf_ecx = SMAPSIZ;
1425 i = vm86_datacall(0x15, &vmf, &vmc);
1426 if (i || vmf.vmf_eax != SMAP_SIG)
1428 if (boothowto & RB_VERBOSE)
1429 printf("SMAP type=%02x base=%08x %08x len=%08x %08x\n",
1431 *(u_int32_t *)((char *)&smap->base + 4),
1432 (u_int32_t)smap->base,
1433 *(u_int32_t *)((char *)&smap->length + 4),
1434 (u_int32_t)smap->length);
1436 if (smap->type != 0x01)
1439 if (smap->length == 0)
1442 if (smap->base >= 0xffffffff) {
1443 printf("%uK of memory above 4GB ignored\n",
1444 (u_int)(smap->length / 1024));
1448 for (i = 0; i <= physmap_idx; i += 2) {
1449 if (smap->base < physmap[i + 1]) {
1450 if (boothowto & RB_VERBOSE)
1452 "Overlapping or non-montonic memory region, ignoring second region\n");
1457 if (smap->base == physmap[physmap_idx + 1]) {
1458 physmap[physmap_idx + 1] += smap->length;
1463 if (physmap_idx == PHYSMAP_SIZE) {
1465 "Too many segments in the physical address map, giving up\n");
1468 physmap[physmap_idx] = smap->base;
1469 physmap[physmap_idx + 1] = smap->base + smap->length;
1471 ; /* fix GCC3.x warning */
1472 } while (vmf.vmf_ebx != 0);
1475 * Perform "base memory" related probes & setup based on SMAP
1478 for (i = 0; i <= physmap_idx; i += 2) {
1479 if (physmap[i] == 0x00000000) {
1480 basemem = physmap[i + 1] / 1024;
1489 if (basemem > 640) {
1490 printf("Preposterous BIOS basemem of %uK, truncating to 640K\n",
1495 for (pa = trunc_page(basemem * 1024);
1496 pa < ISA_HOLE_START; pa += PAGE_SIZE) {
1497 pte = vtopte(pa + KERNBASE);
1498 *pte = pa | PG_RW | PG_V;
1502 for (i = basemem / 4; i < 160; i++)
1503 pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U;
1506 if (physmap[1] != 0)
1510 * If we failed above, try memory map with INT 15:E801
1512 vmf.vmf_ax = 0xE801;
1513 if (vm86_intcall(0x15, &vmf) == 0) {
1514 extmem = vmf.vmf_cx + vmf.vmf_dx * 64;
1518 vm86_intcall(0x15, &vmf);
1519 extmem = vmf.vmf_ax;
1522 * Prefer the RTC value for extended memory.
1524 extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8);
1529 * Special hack for chipsets that still remap the 384k hole when
1530 * there's 16MB of memory - this really confuses people that
1531 * are trying to use bus mastering ISA controllers with the
1532 * "16MB limit"; they only have 16MB, but the remapping puts
1533 * them beyond the limit.
1535 * If extended memory is between 15-16MB (16-17MB phys address range),
1538 if ((extmem > 15 * 1024) && (extmem < 16 * 1024))
1542 physmap[1] = basemem * 1024;
1544 physmap[physmap_idx] = 0x100000;
1545 physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024;
1549 * Now, physmap contains a map of physical memory.
1553 /* make hole for AP bootstrap code YYY */
1554 physmap[1] = mp_bootaddress(physmap[1] / 1024);
1556 /* look for the MP hardware - needed for apic addresses */
1561 * Maxmem isn't the "maximum memory", it's one larger than the
1562 * highest page of the physical address space. It should be
1563 * called something like "Maxphyspage". We may adjust this
1564 * based on ``hw.physmem'' and the results of the memory test.
1566 Maxmem = atop(physmap[physmap_idx + 1]);
1569 Maxmem = MAXMEM / 4;
1573 * hw.physmem is a size in bytes; we also allow k, m, and g suffixes
1574 * for the appropriate modifiers. This overrides MAXMEM.
1576 if ((cp = getenv("hw.physmem")) != NULL) {
1577 u_int64_t AllowMem, sanity;
1580 sanity = AllowMem = strtouq(cp, &ep, 0);
1581 if ((ep != cp) && (*ep != 0)) {
1594 AllowMem = sanity = 0;
1596 if (AllowMem < sanity)
1600 printf("Ignoring invalid memory size of '%s'\n", cp);
1602 Maxmem = atop(AllowMem);
1605 if (atop(physmap[physmap_idx + 1]) != Maxmem &&
1606 (boothowto & RB_VERBOSE))
1607 printf("Physical memory use set to %lluK\n", Maxmem * 4);
1610 * If Maxmem has been increased beyond what the system has detected,
1611 * extend the last memory segment to the new limit.
1613 if (atop(physmap[physmap_idx + 1]) < Maxmem)
1614 physmap[physmap_idx + 1] = ptoa(Maxmem);
1616 /* call pmap initialization to make new kernel address space */
1617 pmap_bootstrap(first, 0);
1620 * Size up each available chunk of physical memory.
1622 physmap[0] = PAGE_SIZE; /* mask off page 0 */
1624 phys_avail[pa_indx++] = physmap[0];
1625 phys_avail[pa_indx] = physmap[0];
1629 * Get dcons buffer address
1631 if (getenv_quad("dcons.addr", &dcons_addr) == 0 ||
1632 getenv_quad("dcons.size", &dcons_size) == 0)
1636 * physmap is in bytes, so when converting to page boundaries,
1637 * round up the start address and round down the end address.
1639 for (i = 0; i <= physmap_idx; i += 2) {
1643 if (physmap[i + 1] < end)
1644 end = trunc_page(physmap[i + 1]);
1645 for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) {
1650 int *ptr = (int *)CADDR1;
1654 * block out kernel memory as not available.
1656 if (pa >= 0x100000 && pa < first)
1660 * block out dcons buffer
1663 && pa >= trunc_page(dcons_addr)
1664 && pa < dcons_addr + dcons_size)
1670 * map page into kernel: valid, read/write,non-cacheable
1672 *pte = pa | PG_V | PG_RW | PG_N;
1677 * Test for alternating 1's and 0's
1679 *(volatile int *)ptr = 0xaaaaaaaa;
1680 if (*(volatile int *)ptr != 0xaaaaaaaa) {
1684 * Test for alternating 0's and 1's
1686 *(volatile int *)ptr = 0x55555555;
1687 if (*(volatile int *)ptr != 0x55555555) {
1693 *(volatile int *)ptr = 0xffffffff;
1694 if (*(volatile int *)ptr != 0xffffffff) {
1700 *(volatile int *)ptr = 0x0;
1701 if (*(volatile int *)ptr != 0x0) {
1705 * Restore original value.
1710 * Adjust array of valid/good pages.
1712 if (page_bad == TRUE) {
1716 * If this good page is a continuation of the
1717 * previous set of good pages, then just increase
1718 * the end pointer. Otherwise start a new chunk.
1719 * Note that "end" points one higher than end,
1720 * making the range >= start and < end.
1721 * If we're also doing a speculative memory
1722 * test and we at or past the end, bump up Maxmem
1723 * so that we keep going. The first bad page
1724 * will terminate the loop.
1726 if (phys_avail[pa_indx] == pa) {
1727 phys_avail[pa_indx] += PAGE_SIZE;
1730 if (pa_indx == PHYS_AVAIL_ARRAY_END) {
1731 printf("Too many holes in the physical address space, giving up\n");
1735 phys_avail[pa_indx++] = pa; /* start */
1736 phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */
1746 * The last chunk must contain at least one page plus the message
1747 * buffer to avoid complicating other code (message buffer address
1748 * calculation, etc.).
1750 while (phys_avail[pa_indx - 1] + PAGE_SIZE +
1751 round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) {
1752 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]);
1753 phys_avail[pa_indx--] = 0;
1754 phys_avail[pa_indx--] = 0;
1757 Maxmem = atop(phys_avail[pa_indx]);
1759 /* Trim off space for the message buffer. */
1760 phys_avail[pa_indx] -= round_page(MSGBUF_SIZE);
1762 avail_end = phys_avail[pa_indx];
1774 * 7 Device Not Available (x87)
1776 * 9 Coprocessor Segment overrun (unsupported, reserved)
1778 * 11 Segment not present
1780 * 13 General Protection
1783 * 16 x87 FP Exception pending
1784 * 17 Alignment Check
1786 * 19 SIMD floating point
1788 * 32-255 INTn/external sources
1793 struct gate_descriptor *gdp;
1794 int gsel_tss, metadata_missing, off, x;
1795 struct mdglobaldata *gd;
1798 * Prevent lowering of the ipl if we call tsleep() early.
1800 gd = &CPU_prvspace[0].mdglobaldata;
1801 bzero(gd, sizeof(*gd));
1803 gd->mi.gd_curthread = &thread0;
1805 atdevbase = ISA_HOLE_START + KERNBASE;
1807 metadata_missing = 0;
1808 if (bootinfo.bi_modulep) {
1809 preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE;
1810 preload_bootstrap_relocate(KERNBASE);
1812 metadata_missing = 1;
1814 if (bootinfo.bi_envp)
1815 kern_envp = (caddr_t)bootinfo.bi_envp + KERNBASE;
1818 * start with one cpu. Note: ncpus2_shift and ncpus2_mask are left
1823 /* Init basic tunables, hz etc */
1827 * make gdt memory segments, the code segment goes up to end of the
1828 * page with etext in it, the data segment goes to the end of
1832 * XXX text protection is temporarily (?) disabled. The limit was
1833 * i386_btop(round_page(etext)) - 1.
1835 gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1);
1836 gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1);
1838 gdt_segs[GPRIV_SEL].ssd_limit =
1839 atop(sizeof(struct privatespace) - 1);
1840 gdt_segs[GPRIV_SEL].ssd_base = (int) &CPU_prvspace[0];
1841 gdt_segs[GPROC0_SEL].ssd_base =
1842 (int) &CPU_prvspace[0].mdglobaldata.gd_common_tss;
1844 gd->mi.gd_prvspace = &CPU_prvspace[0];
1847 * Note: on both UP and SMP curthread must be set non-NULL
1848 * early in the boot sequence because the system assumes
1849 * that 'curthread' is never NULL.
1852 for (x = 0; x < NGDT; x++) {
1854 /* avoid overwriting db entries with APM ones */
1855 if (x >= GAPMCODE32_SEL && x <= GAPMDATA_SEL)
1858 ssdtosd(&gdt_segs[x], &gdt[x].sd);
1861 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
1862 r_gdt.rd_base = (int) gdt;
1865 mi_gdinit(&gd->mi, 0);
1867 lwkt_init_thread(&thread0, proc0paddr, LWKT_THREAD_STACK, 0, &gd->mi);
1868 lwkt_set_comm(&thread0, "thread0");
1869 proc0.p_addr = (void *)thread0.td_kstack;
1870 proc0.p_thread = &thread0;
1871 varsymset_init(&proc0.p_varsymset, NULL);
1872 thread0.td_flags |= TDF_RUNNING;
1873 thread0.td_proc = &proc0;
1874 thread0.td_switch = cpu_heavy_switch; /* YYY eventually LWKT */
1875 safepri = thread0.td_cpl = SWI_MASK | HWI_MASK;
1877 /* make ldt memory segments */
1879 * XXX - VM_MAXUSER_ADDRESS is an end address, not a max. And it
1880 * should be spelled ...MAX_USER...
1882 ldt_segs[LUCODE_SEL].ssd_limit = atop(VM_MAXUSER_ADDRESS - 1);
1883 ldt_segs[LUDATA_SEL].ssd_limit = atop(VM_MAXUSER_ADDRESS - 1);
1884 for (x = 0; x < sizeof ldt_segs / sizeof ldt_segs[0]; x++)
1885 ssdtosd(&ldt_segs[x], &ldt[x].sd);
1887 _default_ldt = GSEL(GLDT_SEL, SEL_KPL);
1889 gd->gd_currentldt = _default_ldt;
1890 /* spinlocks and the BGL */
1894 for (x = 0; x < NIDT; x++) {
1895 #ifdef DEBUG_INTERRUPTS
1896 setidt(x, Xrsvdary[x], SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1898 setidt(x, &IDTVEC(rsvd0), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1901 setidt(0, &IDTVEC(div), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1902 setidt(1, &IDTVEC(dbg), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1903 setidt(2, &IDTVEC(nmi), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1904 setidt(3, &IDTVEC(bpt), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL));
1905 setidt(4, &IDTVEC(ofl), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL));
1906 setidt(5, &IDTVEC(bnd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1907 setidt(6, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1908 setidt(7, &IDTVEC(dna), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1909 setidt(8, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL));
1910 setidt(9, &IDTVEC(fpusegm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1911 setidt(10, &IDTVEC(tss), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1912 setidt(11, &IDTVEC(missing), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1913 setidt(12, &IDTVEC(stk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1914 setidt(13, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1915 setidt(14, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1916 setidt(15, &IDTVEC(rsvd0), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1917 setidt(16, &IDTVEC(fpu), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1918 setidt(17, &IDTVEC(align), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1919 setidt(18, &IDTVEC(mchk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1920 setidt(19, &IDTVEC(xmm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1921 setidt(0x80, &IDTVEC(int0x80_syscall),
1922 SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL));
1923 setidt(0x81, &IDTVEC(int0x81_syscall),
1924 SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL));
1925 setidt(0x82, &IDTVEC(int0x82_syscall),
1926 SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL));
1928 r_idt.rd_limit = sizeof(idt0) - 1;
1929 r_idt.rd_base = (int) idt;
1933 * Initialize the console before we print anything out.
1937 if (metadata_missing)
1938 printf("WARNING: loader(8) metadata is missing!\n");
1947 if (boothowto & RB_KDB)
1948 Debugger("Boot flags requested debugger");
1951 finishidentcpu(); /* Final stage of CPU initialization */
1952 setidt(6, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1953 setidt(13, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
1954 initializecpu(); /* Initialize CPU registers */
1957 * make an initial tss so cpu can get interrupt stack on syscall!
1958 * The 16 bytes is to save room for a VM86 context.
1960 gd->gd_common_tss.tss_esp0 = (int) thread0.td_pcb - 16;
1961 gd->gd_common_tss.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL) ;
1962 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
1963 gd->gd_tss_gdt = &gdt[GPROC0_SEL].sd;
1964 gd->gd_common_tssd = *gd->gd_tss_gdt;
1965 gd->gd_common_tss.tss_ioopt = (sizeof gd->gd_common_tss) << 16;
1968 dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 =
1969 dblfault_tss.tss_esp2 = (int) &dblfault_stack[sizeof(dblfault_stack)];
1970 dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 =
1971 dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL);
1972 dblfault_tss.tss_cr3 = (int)IdlePTD;
1973 dblfault_tss.tss_eip = (int) dblfault_handler;
1974 dblfault_tss.tss_eflags = PSL_KERNEL;
1975 dblfault_tss.tss_ds = dblfault_tss.tss_es =
1976 dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL);
1977 dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL);
1978 dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL);
1979 dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL);
1983 init_param2(physmem);
1985 /* now running on new page tables, configured,and u/iom is accessible */
1987 /* Map the message buffer. */
1988 for (off = 0; off < round_page(MSGBUF_SIZE); off += PAGE_SIZE)
1989 pmap_kenter((vm_offset_t)msgbufp + off, avail_end + off);
1991 msgbufinit(msgbufp, MSGBUF_SIZE);
1993 /* make a call gate to reenter kernel with */
1994 gdp = &ldt[LSYS5CALLS_SEL].gd;
1996 x = (int) &IDTVEC(syscall);
1997 gdp->gd_looffset = x++;
1998 gdp->gd_selector = GSEL(GCODE_SEL,SEL_KPL);
2000 gdp->gd_type = SDT_SYS386CGT;
2001 gdp->gd_dpl = SEL_UPL;
2003 gdp->gd_hioffset = ((int) &IDTVEC(syscall)) >>16;
2005 /* XXX does this work? */
2006 ldt[LBSDICALLS_SEL] = ldt[LSYS5CALLS_SEL];
2007 ldt[LSOL26CALLS_SEL] = ldt[LSYS5CALLS_SEL];
2009 /* transfer to user mode */
2011 _ucodesel = LSEL(LUCODE_SEL, SEL_UPL);
2012 _udatasel = LSEL(LUDATA_SEL, SEL_UPL);
2014 /* setup proc 0's pcb */
2015 thread0.td_pcb->pcb_flags = 0;
2016 thread0.td_pcb->pcb_cr3 = (int)IdlePTD; /* should already be setup */
2017 thread0.td_pcb->pcb_ext = 0;
2018 proc0.p_md.md_regs = &proc0_tf;
2022 * Initialize machine-dependant portions of the global data structure.
2023 * Note that the global data area and cpu0's idlestack in the private
2024 * data space were allocated in locore.
2026 * Note: the idlethread's cpl is 0
2028 * WARNING! Called from early boot, 'mycpu' may not work yet.
2031 cpu_gdinit(struct mdglobaldata *gd, int cpu)
2034 gd->mi.gd_curthread = &gd->mi.gd_idlethread;
2036 lwkt_init_thread(&gd->mi.gd_idlethread,
2037 gd->mi.gd_prvspace->idlestack,
2038 sizeof(gd->mi.gd_prvspace->idlestack), 0, &gd->mi);
2039 lwkt_set_comm(&gd->mi.gd_idlethread, "idle_%d", cpu);
2040 gd->mi.gd_idlethread.td_switch = cpu_lwkt_switch;
2041 gd->mi.gd_idlethread.td_sp -= sizeof(void *);
2042 *(void **)gd->mi.gd_idlethread.td_sp = cpu_idle_restore;
2046 is_globaldata_space(vm_offset_t saddr, vm_offset_t eaddr)
2048 if (saddr >= (vm_offset_t)&CPU_prvspace[0] &&
2049 eaddr <= (vm_offset_t)&CPU_prvspace[MAXCPU]) {
2056 globaldata_find(int cpu)
2058 KKASSERT(cpu >= 0 && cpu < ncpus);
2059 return(&CPU_prvspace[cpu].mdglobaldata.mi);
2062 #if defined(I586_CPU) && !defined(NO_F00F_HACK)
2063 static void f00f_hack(void *unused);
2064 SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL);
2067 f00f_hack(void *unused)
2069 struct gate_descriptor *new_idt;
2075 printf("Intel Pentium detected, installing workaround for F00F bug\n");
2077 r_idt.rd_limit = sizeof(idt0) - 1;
2079 tmp = kmem_alloc(kernel_map, PAGE_SIZE * 2);
2081 panic("kmem_alloc returned 0");
2082 if (((unsigned int)tmp & (PAGE_SIZE-1)) != 0)
2083 panic("kmem_alloc returned non-page-aligned memory");
2084 /* Put the first seven entries in the lower page */
2085 new_idt = (struct gate_descriptor*)(tmp + PAGE_SIZE - (7*8));
2086 bcopy(idt, new_idt, sizeof(idt0));
2087 r_idt.rd_base = (int)new_idt;
2090 if (vm_map_protect(kernel_map, tmp, tmp + PAGE_SIZE,
2091 VM_PROT_READ, FALSE) != KERN_SUCCESS)
2092 panic("vm_map_protect failed");
2095 #endif /* defined(I586_CPU) && !NO_F00F_HACK */
2098 ptrace_set_pc(p, addr)
2102 p->p_md.md_regs->tf_eip = addr;
2107 ptrace_single_step(p)
2110 p->p_md.md_regs->tf_eflags |= PSL_T;
2114 int ptrace_read_u_check(p, addr, len)
2121 if ((vm_offset_t) (addr + len) < addr)
2123 if ((vm_offset_t) (addr + len) <= sizeof(struct user))
2126 gap = (char *) p->p_md.md_regs - (char *) p->p_addr;
2128 if ((vm_offset_t) addr < gap)
2130 if ((vm_offset_t) (addr + len) <=
2131 (vm_offset_t) (gap + sizeof(struct trapframe)))
2136 int ptrace_write_u(p, off, data)
2141 struct trapframe frame_copy;
2143 struct trapframe *tp;
2146 * Privileged kernel state is scattered all over the user area.
2147 * Only allow write access to parts of regs and to fpregs.
2149 min = (char *)p->p_md.md_regs - (char *)p->p_addr;
2150 if (off >= min && off <= min + sizeof(struct trapframe) - sizeof(int)) {
2151 tp = p->p_md.md_regs;
2153 *(int *)((char *)&frame_copy + (off - min)) = data;
2154 if (!EFL_SECURE(frame_copy.tf_eflags, tp->tf_eflags) ||
2155 !CS_SECURE(frame_copy.tf_cs))
2157 *(int*)((char *)p->p_addr + off) = data;
2162 * The PCB is at the end of the user area YYY
2164 min = (char *)p->p_thread->td_pcb - (char *)p->p_addr;
2165 min += offsetof(struct pcb, pcb_save);
2166 if (off >= min && off <= min + sizeof(union savefpu) - sizeof(int)) {
2167 *(int*)((char *)p->p_addr + off) = data;
2179 struct trapframe *tp;
2181 tp = p->p_md.md_regs;
2182 regs->r_fs = tp->tf_fs;
2183 regs->r_es = tp->tf_es;
2184 regs->r_ds = tp->tf_ds;
2185 regs->r_edi = tp->tf_edi;
2186 regs->r_esi = tp->tf_esi;
2187 regs->r_ebp = tp->tf_ebp;
2188 regs->r_ebx = tp->tf_ebx;
2189 regs->r_edx = tp->tf_edx;
2190 regs->r_ecx = tp->tf_ecx;
2191 regs->r_eax = tp->tf_eax;
2192 regs->r_eip = tp->tf_eip;
2193 regs->r_cs = tp->tf_cs;
2194 regs->r_eflags = tp->tf_eflags;
2195 regs->r_esp = tp->tf_esp;
2196 regs->r_ss = tp->tf_ss;
2197 pcb = p->p_thread->td_pcb;
2198 regs->r_gs = pcb->pcb_gs;
2208 struct trapframe *tp;
2210 tp = p->p_md.md_regs;
2211 if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) ||
2212 !CS_SECURE(regs->r_cs))
2214 tp->tf_fs = regs->r_fs;
2215 tp->tf_es = regs->r_es;
2216 tp->tf_ds = regs->r_ds;
2217 tp->tf_edi = regs->r_edi;
2218 tp->tf_esi = regs->r_esi;
2219 tp->tf_ebp = regs->r_ebp;
2220 tp->tf_ebx = regs->r_ebx;
2221 tp->tf_edx = regs->r_edx;
2222 tp->tf_ecx = regs->r_ecx;
2223 tp->tf_eax = regs->r_eax;
2224 tp->tf_eip = regs->r_eip;
2225 tp->tf_cs = regs->r_cs;
2226 tp->tf_eflags = regs->r_eflags;
2227 tp->tf_esp = regs->r_esp;
2228 tp->tf_ss = regs->r_ss;
2229 pcb = p->p_thread->td_pcb;
2230 pcb->pcb_gs = regs->r_gs;
2234 #ifndef CPU_DISABLE_SSE
2236 fill_fpregs_xmm(sv_xmm, sv_87)
2237 struct savexmm *sv_xmm;
2238 struct save87 *sv_87;
2240 struct env87 *penv_87 = &sv_87->sv_env;
2241 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2244 /* FPU control/status */
2245 penv_87->en_cw = penv_xmm->en_cw;
2246 penv_87->en_sw = penv_xmm->en_sw;
2247 penv_87->en_tw = penv_xmm->en_tw;
2248 penv_87->en_fip = penv_xmm->en_fip;
2249 penv_87->en_fcs = penv_xmm->en_fcs;
2250 penv_87->en_opcode = penv_xmm->en_opcode;
2251 penv_87->en_foo = penv_xmm->en_foo;
2252 penv_87->en_fos = penv_xmm->en_fos;
2255 for (i = 0; i < 8; ++i)
2256 sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc;
2258 sv_87->sv_ex_sw = sv_xmm->sv_ex_sw;
2262 set_fpregs_xmm(sv_87, sv_xmm)
2263 struct save87 *sv_87;
2264 struct savexmm *sv_xmm;
2266 struct env87 *penv_87 = &sv_87->sv_env;
2267 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2270 /* FPU control/status */
2271 penv_xmm->en_cw = penv_87->en_cw;
2272 penv_xmm->en_sw = penv_87->en_sw;
2273 penv_xmm->en_tw = penv_87->en_tw;
2274 penv_xmm->en_fip = penv_87->en_fip;
2275 penv_xmm->en_fcs = penv_87->en_fcs;
2276 penv_xmm->en_opcode = penv_87->en_opcode;
2277 penv_xmm->en_foo = penv_87->en_foo;
2278 penv_xmm->en_fos = penv_87->en_fos;
2281 for (i = 0; i < 8; ++i)
2282 sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i];
2284 sv_xmm->sv_ex_sw = sv_87->sv_ex_sw;
2286 #endif /* CPU_DISABLE_SSE */
2289 fill_fpregs(p, fpregs)
2291 struct fpreg *fpregs;
2293 #ifndef CPU_DISABLE_SSE
2295 fill_fpregs_xmm(&p->p_thread->td_pcb->pcb_save.sv_xmm,
2296 (struct save87 *)fpregs);
2299 #endif /* CPU_DISABLE_SSE */
2300 bcopy(&p->p_thread->td_pcb->pcb_save.sv_87, fpregs, sizeof *fpregs);
2305 set_fpregs(p, fpregs)
2307 struct fpreg *fpregs;
2309 #ifndef CPU_DISABLE_SSE
2311 set_fpregs_xmm((struct save87 *)fpregs,
2312 &p->p_thread->td_pcb->pcb_save.sv_xmm);
2315 #endif /* CPU_DISABLE_SSE */
2316 bcopy(fpregs, &p->p_thread->td_pcb->pcb_save.sv_87, sizeof *fpregs);
2321 fill_dbregs(p, dbregs)
2323 struct dbreg *dbregs;
2328 dbregs->dr0 = rdr0();
2329 dbregs->dr1 = rdr1();
2330 dbregs->dr2 = rdr2();
2331 dbregs->dr3 = rdr3();
2332 dbregs->dr4 = rdr4();
2333 dbregs->dr5 = rdr5();
2334 dbregs->dr6 = rdr6();
2335 dbregs->dr7 = rdr7();
2338 pcb = p->p_thread->td_pcb;
2339 dbregs->dr0 = pcb->pcb_dr0;
2340 dbregs->dr1 = pcb->pcb_dr1;
2341 dbregs->dr2 = pcb->pcb_dr2;
2342 dbregs->dr3 = pcb->pcb_dr3;
2345 dbregs->dr6 = pcb->pcb_dr6;
2346 dbregs->dr7 = pcb->pcb_dr7;
2352 set_dbregs(p, dbregs)
2354 struct dbreg *dbregs;
2358 u_int32_t mask1, mask2;
2361 load_dr0(dbregs->dr0);
2362 load_dr1(dbregs->dr1);
2363 load_dr2(dbregs->dr2);
2364 load_dr3(dbregs->dr3);
2365 load_dr4(dbregs->dr4);
2366 load_dr5(dbregs->dr5);
2367 load_dr6(dbregs->dr6);
2368 load_dr7(dbregs->dr7);
2372 * Don't let an illegal value for dr7 get set. Specifically,
2373 * check for undefined settings. Setting these bit patterns
2374 * result in undefined behaviour and can lead to an unexpected
2377 for (i = 0, mask1 = 0x3<<16, mask2 = 0x2<<16; i < 8;
2378 i++, mask1 <<= 2, mask2 <<= 2)
2379 if ((dbregs->dr7 & mask1) == mask2)
2382 pcb = p->p_thread->td_pcb;
2385 * Don't let a process set a breakpoint that is not within the
2386 * process's address space. If a process could do this, it
2387 * could halt the system by setting a breakpoint in the kernel
2388 * (if ddb was enabled). Thus, we need to check to make sure
2389 * that no breakpoints are being enabled for addresses outside
2390 * process's address space, unless, perhaps, we were called by
2393 * XXX - what about when the watched area of the user's
2394 * address space is written into from within the kernel
2395 * ... wouldn't that still cause a breakpoint to be generated
2396 * from within kernel mode?
2399 if (suser_cred(p->p_ucred, 0) != 0) {
2400 if (dbregs->dr7 & 0x3) {
2401 /* dr0 is enabled */
2402 if (dbregs->dr0 >= VM_MAXUSER_ADDRESS)
2406 if (dbregs->dr7 & (0x3<<2)) {
2407 /* dr1 is enabled */
2408 if (dbregs->dr1 >= VM_MAXUSER_ADDRESS)
2412 if (dbregs->dr7 & (0x3<<4)) {
2413 /* dr2 is enabled */
2414 if (dbregs->dr2 >= VM_MAXUSER_ADDRESS)
2418 if (dbregs->dr7 & (0x3<<6)) {
2419 /* dr3 is enabled */
2420 if (dbregs->dr3 >= VM_MAXUSER_ADDRESS)
2425 pcb->pcb_dr0 = dbregs->dr0;
2426 pcb->pcb_dr1 = dbregs->dr1;
2427 pcb->pcb_dr2 = dbregs->dr2;
2428 pcb->pcb_dr3 = dbregs->dr3;
2429 pcb->pcb_dr6 = dbregs->dr6;
2430 pcb->pcb_dr7 = dbregs->dr7;
2432 pcb->pcb_flags |= PCB_DBREGS;
2439 * Return > 0 if a hardware breakpoint has been hit, and the
2440 * breakpoint was in user space. Return 0, otherwise.
2443 user_dbreg_trap(void)
2445 u_int32_t dr7, dr6; /* debug registers dr6 and dr7 */
2446 u_int32_t bp; /* breakpoint bits extracted from dr6 */
2447 int nbp; /* number of breakpoints that triggered */
2448 caddr_t addr[4]; /* breakpoint addresses */
2452 if ((dr7 & 0x000000ff) == 0) {
2454 * all GE and LE bits in the dr7 register are zero,
2455 * thus the trap couldn't have been caused by the
2456 * hardware debug registers
2463 bp = dr6 & 0x0000000f;
2467 * None of the breakpoint bits are set meaning this
2468 * trap was not caused by any of the debug registers
2474 * at least one of the breakpoints were hit, check to see
2475 * which ones and if any of them are user space addresses
2479 addr[nbp++] = (caddr_t)rdr0();
2482 addr[nbp++] = (caddr_t)rdr1();
2485 addr[nbp++] = (caddr_t)rdr2();
2488 addr[nbp++] = (caddr_t)rdr3();
2491 for (i=0; i<nbp; i++) {
2493 (caddr_t)VM_MAXUSER_ADDRESS) {
2495 * addr[i] is in user space
2502 * None of the breakpoints are in user space.
2510 Debugger(const char *msg)
2512 printf("Debugger(\"%s\") called.\n", msg);
2516 #include <machine/apicvar.h>
2519 * Provide stub functions so that the MADT APIC enumerator in the acpi
2520 * kernel module will link against a kernel without 'option APIC_IO'.
2522 * XXX - This is a gross hack.
2525 apic_register_enumerator(struct apic_enumerator *enumerator)
2530 ioapic_create(uintptr_t addr, int32_t id, int intbase)
2536 ioapic_disable_pin(void *cookie, u_int pin)
2542 ioapic_enable_mixed_mode(void)
2547 ioapic_get_vector(void *cookie, u_int pin)
2553 ioapic_register(void *cookie)
2558 ioapic_remap_vector(void *cookie, u_int pin, int vector)
2564 ioapic_set_extint(void *cookie, u_int pin)
2570 ioapic_set_nmi(void *cookie, u_int pin)
2576 ioapic_set_polarity(void *cookie, u_int pin, char activehi)
2582 ioapic_set_triggermode(void *cookie, u_int pin, char edgetrigger)
2588 lapic_create(u_int apic_id, int boot_cpu)
2593 lapic_init(uintptr_t addr)
2598 lapic_set_lvt_mode(u_int apic_id, u_int lvt, u_int32_t mode)
2604 lapic_set_lvt_polarity(u_int apic_id, u_int lvt, u_char activehi)
2610 lapic_set_lvt_triggermode(u_int apic_id, u_int lvt, u_char edgetrigger)
2615 #include <sys/disklabel.h>
2618 * Determine the size of the transfer, and make sure it is
2619 * within the boundaries of the partition. Adjust transfer
2620 * if needed, and signal errors or early completion.
2623 bounds_check_with_label(struct buf *bp, struct disklabel *lp, int wlabel)
2625 struct partition *p = lp->d_partitions + dkpart(bp->b_dev);
2626 int labelsect = lp->d_partitions[0].p_offset;
2627 int maxsz = p->p_size,
2628 sz = (bp->b_bcount + DEV_BSIZE - 1) >> DEV_BSHIFT;
2630 /* overwriting disk label ? */
2631 /* XXX should also protect bootstrap in first 8K */
2632 if (bp->b_blkno + p->p_offset <= LABELSECTOR + labelsect &&
2633 #if LABELSECTOR != 0
2634 bp->b_blkno + p->p_offset + sz > LABELSECTOR + labelsect &&
2636 (bp->b_flags & B_READ) == 0 && wlabel == 0) {
2637 bp->b_error = EROFS;
2641 #if defined(DOSBBSECTOR) && defined(notyet)
2642 /* overwriting master boot record? */
2643 if (bp->b_blkno + p->p_offset <= DOSBBSECTOR &&
2644 (bp->b_flags & B_READ) == 0 && wlabel == 0) {
2645 bp->b_error = EROFS;
2650 /* beyond partition? */
2651 if (bp->b_blkno < 0 || bp->b_blkno + sz > maxsz) {
2652 /* if exactly at end of disk, return an EOF */
2653 if (bp->b_blkno == maxsz) {
2654 bp->b_resid = bp->b_bcount;
2657 /* or truncate if part of it fits */
2658 sz = maxsz - bp->b_blkno;
2660 bp->b_error = EINVAL;
2663 bp->b_bcount = sz << DEV_BSHIFT;
2666 bp->b_pblkno = bp->b_blkno + p->p_offset;
2670 bp->b_flags |= B_ERROR;
2677 * Provide inb() and outb() as functions. They are normally only
2678 * available as macros calling inlined functions, thus cannot be
2679 * called inside DDB.
2681 * The actual code is stolen from <machine/cpufunc.h>, and de-inlined.
2687 /* silence compiler warnings */
2689 void outb(u_int, u_char);
2696 * We use %%dx and not %1 here because i/o is done at %dx and not at
2697 * %edx, while gcc generates inferior code (movw instead of movl)
2698 * if we tell it to load (u_short) port.
2700 __asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port));
2705 outb(u_int port, u_char data)
2709 * Use an unnecessary assignment to help gcc's register allocator.
2710 * This make a large difference for gcc-1.40 and a tiny difference
2711 * for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for
2712 * best results. gcc-2.6.0 can't handle this.
2715 __asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port));
2722 #include "opt_cpu.h"
2726 * initialize all the SMP locks
2729 /* critical region around IO APIC, apic_imen */
2730 struct spinlock imen_spinlock;
2732 /* Make FAST_INTR() routines sequential */
2733 struct spinlock fast_intr_spinlock;
2735 /* critical region for old style disable_intr/enable_intr */
2736 struct spinlock mpintr_spinlock;
2738 /* critical region around INTR() routines */
2739 struct spinlock intr_spinlock;
2741 /* lock region used by kernel profiling */
2742 struct spinlock mcount_spinlock;
2744 /* locks com (tty) data/hardware accesses: a FASTINTR() */
2745 struct spinlock com_spinlock;
2747 /* locks kernel printfs */
2748 struct spinlock cons_spinlock;
2750 /* lock regions around the clock hardware */
2751 struct spinlock clock_spinlock;
2753 /* lock around the MP rendezvous */
2754 struct spinlock smp_rv_spinlock;
2760 * mp_lock = 0; BSP already owns the MP lock
2763 * Get the initial mp_lock with a count of 1 for the BSP.
2764 * This uses a LOGICAL cpu ID, ie BSP == 0.
2767 cpu_get_initial_mplock();
2770 spin_lock_init(&mcount_spinlock);
2771 spin_lock_init(&fast_intr_spinlock);
2772 spin_lock_init(&intr_spinlock);
2773 spin_lock_init(&mpintr_spinlock);
2774 spin_lock_init(&imen_spinlock);
2775 spin_lock_init(&smp_rv_spinlock);
2776 spin_lock_init(&com_spinlock);
2777 spin_lock_init(&clock_spinlock);
2778 spin_lock_init(&cons_spinlock);
2780 /* our token pool needs to work early */
2781 lwkt_token_pool_init();