Peter Avalos [Sat, 19 Jan 2008 23:36:48 +0000 (23:36 +0000)]
Merge from vendor branch FILE:
Import file-4.23.
Peter Avalos [Sat, 19 Jan 2008 23:36:48 +0000 (23:36 +0000)]
Import file-4.23.
Sascha Wildner [Sat, 19 Jan 2008 19:41:33 +0000 (19:41 +0000)]
Start sentences on a new line, fix typo and use .An.
Sascha Wildner [Sat, 19 Jan 2008 19:11:53 +0000 (19:11 +0000)]
Sort sections as per mdoc(7) and bump date for r1.16.
Matthias Schmidt [Sat, 19 Jan 2008 18:56:46 +0000 (18:56 +0000)]
Add HISTORY entry for dntpd(8)
Matthias Schmidt [Sat, 19 Jan 2008 18:27:11 +0000 (18:27 +0000)]
FreeBSD released 6.3
Sepherosa Ziehau [Sat, 19 Jan 2008 16:10:36 +0000 (16:10 +0000)]
For 2560 parts:
ifconfig ral0 txpower POWER
now sets ral(4)'s TX power to POWER dBm
Matthias Schmidt [Sat, 19 Jan 2008 15:35:18 +0000 (15:35 +0000)]
Bump the date for the -S change.
Matthias Schmidt [Sat, 19 Jan 2008 15:33:42 +0000 (15:33 +0000)]
Introduce a new option -S to use the size of a file for sorting (-t). This
is handy to find fat files and brings us in line with all the other BSDs.
Simon Schubert [Sat, 19 Jan 2008 14:05:29 +0000 (14:05 +0000)]
Add shim for pthread_set_name_np. Not functional.
Obtained-from: FreeBSD
Sepherosa Ziehau [Sat, 19 Jan 2008 13:36:31 +0000 (13:36 +0000)]
- Setup BBP according to the values stored in BBP
- If EEPROM channel TX power is above 31 set it to 24, since there is only
5bits in the RF register for channel TX power
- Add RX sensitivity calibration support (STA operation mode). Add sysctl
node for it. It is on by default. Various limit values are obtained from
Ralink RT2500
Simon Schubert [Sat, 19 Jan 2008 13:30:51 +0000 (13:30 +0000)]
Don't write errno to the GOT, but properly follow the indirection
This only applies to PIC objects without TLS support, i.e. rtld.
This was broken since long but didn't get caught, because rtld is the
only consumer of this configuration and doesn't deal with errno a lot.
Noticed-by: godlkwrth on IRC while porting WINE
Simon Schubert [Sat, 19 Jan 2008 13:27:02 +0000 (13:27 +0000)]
Use correct register
Sepherosa Ziehau [Sat, 19 Jan 2008 10:08:52 +0000 (10:08 +0000)]
- Don't set hardware slot time according to "short slot time" capability
in various management frames from AP. 2560 part seems to have trouble
to acknowledge frames sent at CCK/DS rates by certain APs (e.g. Linksys)
Add comment about it.
- 54/48/36/24Mb should use 24Mb as acknowledge rate. 18/12Mb should use
12Mb as acknowledge rate. 9/6Mb should use 6Mb as acknowledge rate.
Adjust register values accordingly (infered from Ralink RT2500 comment).
# With this commit (properly ack frames sent at CCK/DS rates) and by setting
# txpower to 70 (avoid excessive retry at 48Mb and 54Mb), ASUS WL-107g now
# works quite well with the Linksys AP (WRT54G, with the default firmware).
Sascha Wildner [Sat, 19 Jan 2008 08:50:12 +0000 (08:50 +0000)]
Remove some unnecessary initialization.
Sascha Wildner [Sat, 19 Jan 2008 08:23:17 +0000 (08:23 +0000)]
Add a manual page for contigmalloc() and contigfree().
Taken from FreeBSD with some adjustments and a few lines about
M_WAITOK behavior.
Reviewed-by: sephe
Sepherosa Ziehau [Sat, 19 Jan 2008 07:34:13 +0000 (07:34 +0000)]
- Capabilities information field is 2bytes long. Mark old sta info
structure's capinfo as deprecated. Add new field in sta info to
deliver capabilities information to userland applications.
- Update ifconfig(8)
Sepherosa Ziehau [Sat, 19 Jan 2008 07:03:55 +0000 (07:03 +0000)]
- Capabilities information field is 2bytes long. Mark old scan result
structure's capinfo as deprecated. Use padding field in scan result
to deliver capabilities information.
- Update ifconfig(8) and wpa_supplicant(8) accordingly
Sascha Wildner [Fri, 18 Jan 2008 20:49:59 +0000 (20:49 +0000)]
gbk.5 was added by mistake.
Matthew Dillon [Fri, 18 Jan 2008 19:38:29 +0000 (19:38 +0000)]
Fix time conversion bugs in the stamp command.
Submitted-by: YONETANI Tomokazu <qhwt+dfly@les.ath.cx>
Matthew Dillon [Fri, 18 Jan 2008 19:13:16 +0000 (19:13 +0000)]
Fix an issue with cache_rename(). This procedure previously copied a
namecache entry to a new one and then invalidated the old one, operating
under the idea that the namespace structures should remain consistent.
However, the curret, root, and jail directories for a process are stored as
pointers to namecache structures and renaming a directory resulted in
the current, root, or jail directory for related processes becoming invalid.
Changes to the namecache structure over the years (separately allocated
nc_name, rehash support, etc) now make it possible to implement the
cache_rename() by physically renaming the namecache structure instead
of copying it, allowing process references to be retained.
NOTE: There may still be a race against nlookup's.
Reported-by: Vincent Stemen <vs1@crel.us>
Testing-by: Vincent Stemen <vs1@crel.us>
Matthew Dillon [Fri, 18 Jan 2008 19:06:29 +0000 (19:06 +0000)]
Add hammer_recover.c for kernel builds w/ HAMMER.
Matthias Schmidt [Fri, 18 Jan 2008 13:53:46 +0000 (13:53 +0000)]
Fix a bug preventing burncd(8) from dispaying the progress of CD-RW (maybe
more operations) blanking/erasing. Originally from FreeBSD.
Before:
# burncd -f /dev/acd0 erase
erasing CD (stalls here and you can't see any progress)
After:
# burncd -f /dev/acd0 erase
erasing CD - xx % done
Matthew Dillon [Fri, 18 Jan 2008 07:02:41 +0000 (07:02 +0000)]
HAMMER 21/many: B-Tree node locking finalization.
* Implement the final locking scheme for B-Tree nodes. Use shared locks
for all searches, upgrade to exclusive locks for modifications. If
unable to upgrade fall through with an EDEADLK error code and retry the
operation after releasing all other locks and blocking on the lock that
could not be obtained.
Simple iterations never fail and do not need to handle an EDEADLK error
code.
Because EDEADLK can actually occur quite often the error paths for most
code modules will begin to get some exercise, which is good for code
stability.
It is possible to cache cursor positions closer to the desired target
to reduce re-lookup times but I don't try to do this yet.
* Finalize code for basic (unbalanced) deletions. Neither leaf nor internal
nodes are allowed to be empty any more (except at the root of a cluster),
but recursive deletions may deadlock while going up the tree and leave
an internal node with a zero'd out element. The search and iteration
code now properly detects such elements and finishes off the deletion,
though a complete cleaning will be left up to the balancing module.
* Remove most instances of recursively instantiated cursors. There is still
one left in the directory deletion code.
* Remove all remaining unprotected cursor transitions (where locks had to be
released to avoid deadlocks).
Sepherosa Ziehau [Fri, 18 Jan 2008 03:58:05 +0000 (03:58 +0000)]
Nuke staled code
Sepherosa Ziehau [Fri, 18 Jan 2008 03:52:02 +0000 (03:52 +0000)]
- Extract RX sensitivity calibration capability from EEPROM
- Skip invalid BBP register/value entries extracted from EEPROM
- More debug messages
Sepherosa Ziehau [Fri, 18 Jan 2008 02:15:43 +0000 (02:15 +0000)]
- If channel TX power from EEPROM is above 32, set it to 24
- Rename rt2560_read_eeprom() to rt2560_read_config()
Sepherosa Ziehau [Fri, 18 Jan 2008 01:43:07 +0000 (01:43 +0000)]
Fix EEPROM channel TX power parsing.
Based-on: Ralink RT2500
Sascha Wildner [Thu, 17 Jan 2008 23:02:40 +0000 (23:02 +0000)]
Add some words about /usr/share/i18n and /usr/share/openssl/man.
Sepherosa Ziehau [Thu, 17 Jan 2008 13:33:11 +0000 (13:33 +0000)]
Add TX power compensation support in TX power calibration.
EEPROM layout for TSSI is obtained from Ralink RT61
Matthias Schmidt [Thu, 17 Jan 2008 12:51:22 +0000 (12:51 +0000)]
Remove tcsh emacs script which is obsolete due to the latest tcsh import.
Reminded-by: swildner@
Sepherosa Ziehau [Thu, 17 Jan 2008 08:56:14 +0000 (08:56 +0000)]
Add RX sensitivity calibration according to false CCA at relative long distance.
RX sensitivity adjustment step and two false CCA thresholds are according to
Ralink RT61, though they adjust RX sensitivity in the wrong direction.
# For my EW-7608PG
# without RX sensitivity calibration, false CCA is ~1200
# with RX sensitivity calibration, false CCA is 0 for most of the time
Sascha Wildner [Thu, 17 Jan 2008 07:39:00 +0000 (07:39 +0000)]
untabify
Sepherosa Ziehau [Thu, 17 Jan 2008 07:35:38 +0000 (07:35 +0000)]
- Add auto TX power and RX sensitivity calibration support. Add two sysctl
nodes to enable/disable them. Calibration is only done when NIC operates
as STA, since it does not make sense when the NIC operates in other mode.
By default, they are all disabled.
- Add sysctl node for TX power correction. TX power correction is disabled
by default. This could be used when TX power calibration should not be
performed, e.g. when NIC operates as AP
Enable TX power and RX sensitivity calibration and set TX power correction
to 8 (-4db) makes my EW-7608PG work well @48Mb and @54Mb when it is near AP
(-44dbm ~ -58dbm), @54Mb ~50 retries for ~1080 packets. Originally the NIC
requires at least one retry for every packets @48Mb.
TX power calibration needs further investigation. Calibrating TX power
based on RSSI may not work weel; integrate it into TX rate control may work
better.
Various limits and correction values are obtained from Ralink RT61 driver.
# TX power stepping for Auto-AGC capable NICs is not in place yet.
# RX sensitivity calibration for long distance is not in place yet.
Matthew Dillon [Thu, 17 Jan 2008 05:14:49 +0000 (05:14 +0000)]
HAMMER utilities:
* Fix missing releases, fix endless loop in cache flush.
Matthew Dillon [Thu, 17 Jan 2008 05:06:09 +0000 (05:06 +0000)]
HAMMER 20B/many: New spike topology, simplify the B-Tree code.
* Specify a spike as two B-Tree leaf elements instead of one B-Tree
internal element. This simplifies boundary corrections when traversing
through internal nodes.
* Remove subtree_count, which means we don't have to recurse through the
parent nodes to update it any more.
* Simplify the recursive deletion case. Neither Leaf or internal nodes
can be empty. If unable to remove a node due to a deadlock, simply zero
out the subtree_offset in the parent (internal) node and deal with it
later.
* Add some Debugger() shims for deletion cases not yet handled.
Matthew Dillon [Thu, 17 Jan 2008 04:59:50 +0000 (04:59 +0000)]
HAMMER utilities:
* Add a 'show' command to the hammer utility. This command dumps the B-Tree
for a HAMMER filesystem, allowing me to see just how bad my spike code
currently is.
* Remove the ClusterSize global (well, move it to newfs_hammer), the
hammer utilities pull the cluster size out of the volume header.
* UsingSuperClusters is only used by newfs_hammer. Super-cluster use
can be controlled on a volume-by-volume basis so pull the information
out of the volume header.
Matthias Schmidt [Wed, 16 Jan 2008 14:18:57 +0000 (14:18 +0000)]
Sync with FreeBSD to get support for SHA256
Sepherosa Ziehau [Wed, 16 Jan 2008 12:37:55 +0000 (12:37 +0000)]
Nuke staled code
Sepherosa Ziehau [Wed, 16 Jan 2008 12:31:25 +0000 (12:31 +0000)]
- Save two sets of average RSSI for 2529RF
- Extract secondary RSSI connection value from EEPROM
Matthias Schmidt [Wed, 16 Jan 2008 12:27:49 +0000 (12:27 +0000)]
Update the list of USB device IDs for umass(4) and needed routines.
Reviewed-by: hasso@
Taken-from: FreeBSD
Matthias Schmidt [Wed, 16 Jan 2008 12:25:36 +0000 (12:25 +0000)]
Update the list of USB device IDs for uscanner(4).
Reviewed-by: hasso@
Taken-from: FreeBSD
Matthias Schmidt [Wed, 16 Jan 2008 12:24:31 +0000 (12:24 +0000)]
Updated the list of USB device IDs for uvscom(4).
Reviewed-by: hasso@
Taken-from: FreeBSD
Matthias Schmidt [Wed, 16 Jan 2008 12:23:01 +0000 (12:23 +0000)]
Updated the list of USB device IDs for uvisor(4) and needed routines.
Reviewed-by: hasso@
Taken-from: FreeBSD
Sascha Wildner [Wed, 16 Jan 2008 11:33:43 +0000 (11:33 +0000)]
Add some more rc vars for Bluetooth to rc.conf and document them.
Matthias Schmidt [Wed, 16 Jan 2008 09:28:58 +0000 (09:28 +0000)]
Mention /etc/upgrade
Matthew Dillon [Wed, 16 Jan 2008 01:15:37 +0000 (01:15 +0000)]
HAMMER 20A/many: B-Tree lookup API cleanup, B-Tree changes.
* Abstract the as-of TID in the cursor API to hide the implementation
details.
* Key off of delete_tid instead of create_tid.
* Deal with a boundary key issue related to as-of lookups. This issue arises
when several records which differ only by their create_tid/delete_tid
reside in different leaf nodes. For example:
o(10) (delete_tid's listed)
/ \
6 16
If we want to do an as-of lookup of say, (8), the btree scan will dive
into the left branch and fail to find any elements visible to our as-of
request. The element '16' in the right branch, however, is visible
because it was deleted after the as-of timestamp of 8.
When this case arises btree_search() now detects that the boundary
element (10) exactly matches the request except for the delete_tid
and btree_search() now automatically iterates if an as-of search
is being executed.
For non-asof searches, such as insertion searches, the delete_tid is
treated as an absolute and it is desireable to recurse into the left
branch and stop there. If we popped over to the right branch our
new element (8) would be to the right of our boundary element (10)
instead of to the left.
* Remove code related to dealing with spike ranges in preparation for
a major change in the way spikes operate.
Simon Schubert [Wed, 16 Jan 2008 01:02:40 +0000 (01:02 +0000)]
Adjust for the DragonFly ELF ABI
Sascha Wildner [Tue, 15 Jan 2008 21:35:46 +0000 (21:35 +0000)]
Mention that '_enable' is not needed.
Sascha Wildner [Tue, 15 Jan 2008 21:35:09 +0000 (21:35 +0000)]
* Document the valid values for variables of type bool. They is already
documented in rc.subr(8) but it seems appropriate to add this info
here, too.
* Mention that '_enable' is not needed.
Sascha Wildner [Tue, 15 Jan 2008 20:54:02 +0000 (20:54 +0000)]
Add bluetooth files to the 'distribution' target.
Hasso Tepper [Tue, 15 Jan 2008 19:17:36 +0000 (19:17 +0000)]
Defaults for btconfig and sdpd rc.d scripts.
Reminded-by: swildner@ and matthias@
Matthias Schmidt [Tue, 15 Jan 2008 14:48:47 +0000 (14:48 +0000)]
If make upgrade deletes a file, print its name to stdout.
Matthias Schmidt [Tue, 15 Jan 2008 14:21:00 +0000 (14:21 +0000)]
Remove 3rd clause
Hasso Tepper [Tue, 15 Jan 2008 14:19:11 +0000 (14:19 +0000)]
Increase size of the umsm(4) buffers and tty(4) input buffer to allow high
speed serial devices like HSDPA modems work more reliably.
Matthias Schmidt [Tue, 15 Jan 2008 13:56:18 +0000 (13:56 +0000)]
Remove sh.exp.c.patch. The fix is included in version 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:54:43 +0000 (13:54 +0000)]
Switch to tcsh 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:50:59 +0000 (13:50 +0000)]
Add checkpoiting support to tcsh
Matthias Schmidt [Tue, 15 Jan 2008 13:46:32 +0000 (13:46 +0000)]
Add our READMEs
Matthias Schmidt [Tue, 15 Jan 2008 13:41:47 +0000 (13:41 +0000)]
Merge from vendor branch TCSH:
Vendor import of tcsh 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 13:41:47 +0000 (13:41 +0000)]
Vendor import of tcsh 6.15.00
Matthias Schmidt [Tue, 15 Jan 2008 12:30:44 +0000 (12:30 +0000)]
o Prepend output with a <TAB>
o Fix typo
Simon Schubert [Tue, 15 Jan 2008 10:09:29 +0000 (10:09 +0000)]
Add our register layout changes.
Sepherosa Ziehau [Tue, 15 Jan 2008 09:45:35 +0000 (09:45 +0000)]
More ids.
Obtained-from: Ralink RT73
Sepherosa Ziehau [Tue, 15 Jan 2008 09:01:13 +0000 (09:01 +0000)]
- Store tx rate control parameters in drivers, so switching between tx rate
control algorithms will not loose configured values.
- Move tx rate control private structures into its implementation file.
Matthew Dillon [Tue, 15 Jan 2008 06:02:57 +0000 (06:02 +0000)]
HAMMER 19/Many - Cleanup pass, cluster recovery code.
Sepherosa Ziehau [Tue, 15 Jan 2008 03:03:25 +0000 (03:03 +0000)]
Simplify tx rate control for drivers which only support periodic TX
data statistics.
Simon Schubert [Tue, 15 Jan 2008 00:39:15 +0000 (00:39 +0000)]
Update for import
Simon Schubert [Tue, 15 Jan 2008 00:38:45 +0000 (00:38 +0000)]
Merge from vendor branch GDB:
Import missed files from gdb-6.7.1
Simon Schubert [Tue, 15 Jan 2008 00:38:45 +0000 (00:38 +0000)]
Import missed files from gdb-6.7.1
Simon Schubert [Mon, 14 Jan 2008 21:36:39 +0000 (21:36 +0000)]
Switch to gdb-6.7.1
Simon Schubert [Mon, 14 Jan 2008 21:27:06 +0000 (21:27 +0000)]
Add our READMEs
Simon Schubert [Mon, 14 Jan 2008 21:25:33 +0000 (21:25 +0000)]
Remove erroneously imported files
Simon Schubert [Mon, 14 Jan 2008 21:04:52 +0000 (21:04 +0000)]
Customize the code to make it compile nicely.
Simon Schubert [Mon, 14 Jan 2008 21:00:22 +0000 (21:00 +0000)]
Import a stripped gdb-6.7.1
Simon Schubert [Mon, 14 Jan 2008 21:00:22 +0000 (21:00 +0000)]
Merge from vendor branch GDB:
Import a stripped gdb-6.7.1
Joe Talbott [Mon, 14 Jan 2008 19:27:11 +0000 (19:27 +0000)]
Add support for Cisco-Linksys WUSB54GC which has a different vendor ID
than the Linksys WUSB54GC.
Matthew Dillon [Mon, 14 Jan 2008 15:27:17 +0000 (15:27 +0000)]
Attempt to fix an interrupt recursion which can occur in specific
situations. The 'slow' interrupt code schedules an interrupt thread
without holding a critical section in an attempt to allow the thread to
preempt the current thread. If the thread preempts it can re-arm the
interrupt prior to returning and cause an interrupt recursion to occur
before the interrupt code is able to finish doreti, leading to a stack
overflow.
Since we want to preempt we cannot use a critical section to prevent
the recursion. Instead, use curthread->td_nest_count to prevent
recursive interrupts while the thread is unprotected by a critical
section. The same condition will now cause successive interrupts to
be queued and then dispatched synchronously by doreti.
Reported-by: "Simon 'corecode' Schubert" <corecode@fs.ei.tum.de>
Matthias Schmidt [Mon, 14 Jan 2008 12:39:27 +0000 (12:39 +0000)]
o Install Makefile_upgrade.inc to /etc/upgrade instead of /var/db.
Requested-by: dillon@
o Install the file really _after_ installworld this time. Thanks to
corecode@ for the report. This unbreaks buildworld
o Add an entry to the mtree file for /etc/upgrade
o Print a short message before deleting files
Matthias Schmidt [Mon, 14 Jan 2008 12:34:44 +0000 (12:34 +0000)]
Create four instead of one devices for vnode disks in /dev. If you use
vn(4) one entry is not enough in most cases.
Matthias Schmidt [Sun, 13 Jan 2008 19:05:27 +0000 (19:05 +0000)]
Remove the entries for the deleted tools.
Matthias Schmidt [Sun, 13 Jan 2008 19:03:08 +0000 (19:03 +0000)]
Remove rc/tools/tools/html-mv which is useless.
Matthias Schmidt [Sun, 13 Jan 2008 19:01:52 +0000 (19:01 +0000)]
Delete src/tools/tools/tcl_bmake. We don't have tcl in the source so the
script is useless.
Matthias Schmidt [Sun, 13 Jan 2008 19:00:33 +0000 (19:00 +0000)]
Nuke src/tools/tools/epfe. The script is useless because we don't have
a locally installed SGML handbook. If someone wants to use the tool with
the FreeBSD handbook, the tool remains in the Attic as well as in the
FreeBSD source.
Matthias Schmidt [Sun, 13 Jan 2008 18:21:50 +0000 (18:21 +0000)]
Add a new tool to convert FreeBSD USB device IDs to the format we use
in DragonFly. This eases the process of getting new IDs from FreeBSD, which
is currently necessary due to the fact that their lists are much longer
than our lists :)
To use the tool you need the usbdevs file from FreeBSD:
http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/usb/usbdevs
usage: ./convert_usb_ids.sh [-d] < FREEBSD-IDs > DFLY-IDs
The tool operates in two modi. The first one is for umass entries and
converts entries like this
{ USB_VENDOR_ADDONICS2, USB_PRODUCT_ADDONICS2_CABLE_205, RID_WILDCARD,
UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
NO_QUIRKS
},
to
/* Addonics Cable 205 */
{ .vendor = 0x0bf6, .product = 0xa001, release = WILDCARD_ID,
.proto = UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
.quirks = NO_QUIRKS
},
Pass -d option to use umass modi. The second one converts easier
entries:
{{ USB_VENDOR_ACEECA, USB_PRODUCT_ACEECA_MEZ1000 }, PALM4 },
to
{{ USB_DEVICE(0x4766, 0x0001) }, PALM4 }, /* Aceeca MEZ1000 RDA */
NOTE: Due to some peculiarities of the usbdevs file, it is possible that you
can get duplicate entries or wrong comments. So make sure that your converted
entry is correct.
Simon Schubert [Sun, 13 Jan 2008 18:02:20 +0000 (18:02 +0000)]
GC ifdef magic for old gcc version.
Sascha Wildner [Sun, 13 Jan 2008 17:56:03 +0000 (17:56 +0000)]
handbook.txt has been removed
Sascha Wildner [Sun, 13 Jan 2008 17:51:36 +0000 (17:51 +0000)]
Nuke remains of recently removed stuff.
Hasso Tepper [Sun, 13 Jan 2008 16:04:02 +0000 (16:04 +0000)]
Huawei UMTS/HSDPA adapetrs are already handled by umsm(4).
Matthias Schmidt [Sun, 13 Jan 2008 10:59:31 +0000 (10:59 +0000)]
Add Makefile_upgrade.inc to the tree. This file contains all files
which are obsolete as of now and can be removed by a 'make upgrade'
run. This should prevent further polluting of etc/Makefile with
rm -rf $foo statements.
The file is installed by 'make installworld' to ${DESTDIR}/var/db
and gets parsed by 'make upgrade'. If a user exchanges the two commands
by accident, 'make upgrade' prints a warning and doesn't remove any
files. The upgrade file itself is removed after a successful run.
Matthias Schmidt [Sun, 13 Jan 2008 10:05:21 +0000 (10:05 +0000)]
o Correct quirks entry for a MP3 player
o Add new quirk for Netak OnlyDisk drive
Obtained-from: FreeBSD
Sascha Wildner [Sun, 13 Jan 2008 08:41:15 +0000 (08:41 +0000)]
Rearrange a bit to avoid duplicate code.
Matthias Schmidt [Sat, 12 Jan 2008 20:11:53 +0000 (20:11 +0000)]
Sync page with FreeBSD to get mode pages for removable devices.
Matthias Schmidt [Sat, 12 Jan 2008 20:08:49 +0000 (20:08 +0000)]
Sync the file with FreeBSD to get the latest USB HID usage tables for
usbhid(3).
Matthias Schmidt [Sat, 12 Jan 2008 19:47:05 +0000 (19:47 +0000)]
Remove src/share/examples/BSD_daemon containing images/sources for the
BSD daemon and FreeBSD CD covers.
Matthias Schmidt [Sat, 12 Jan 2008 19:43:50 +0000 (19:43 +0000)]
Remove src/share/examples/worm used to build FreeBSD CDROMs. Its it
useless on DragonFly. Users who want to build their own CDROM can use our
nrelease stuff.
Matthias Schmidt [Sat, 12 Jan 2008 19:41:00 +0000 (19:41 +0000)]
Remove src/share/examples/FreeBSD_version which is not really useful on
DragonFly.
Sascha Wildner [Sat, 12 Jan 2008 17:53:16 +0000 (17:53 +0000)]
Remove some ancient HTML files and an obsolete copy of 'Theory' (there
is a newer version in share/zoneinfo).
Matthias Schmidt [Sat, 12 Jan 2008 16:30:47 +0000 (16:30 +0000)]
Remove handbook during next make upgrade run.
Matthias Schmidt [Sat, 12 Jan 2008 16:25:57 +0000 (16:25 +0000)]
Remove the SUBDIR line. The last entry was the handbook.