2 * Copyright (c) 1982, 1987, 1990 The Regents of the University of California.
3 * Copyright (c) 1992 Terrence R. Lambert.
4 * Copyright (c) 2003 Peter Wemm.
5 * Copyright (c) 2008 The DragonFly Project.
8 * This code is derived from software contributed to Berkeley by
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the University of
22 * California, Berkeley and its contributors.
23 * 4. Neither the name of the University nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
27 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
28 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
31 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
35 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
36 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
39 * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91
40 * $FreeBSD: src/sys/i386/i386/machdep.c,v 1.385.2.30 2003/05/31 08:48:05 alc Exp $
43 //#include "use_npx.h"
45 #include "opt_compat.h"
48 #include "opt_directio.h"
50 #include "opt_msgbuf.h"
53 #include <sys/param.h>
54 #include <sys/systm.h>
55 #include <sys/sysproto.h>
56 #include <sys/signalvar.h>
57 #include <sys/kernel.h>
58 #include <sys/linker.h>
59 #include <sys/malloc.h>
63 #include <sys/reboot.h>
65 #include <sys/msgbuf.h>
66 #include <sys/sysent.h>
67 #include <sys/sysctl.h>
68 #include <sys/vmmeter.h>
70 #include <sys/usched.h>
73 #include <sys/ctype.h>
74 #include <sys/serialize.h>
75 #include <sys/systimer.h>
78 #include <vm/vm_param.h>
80 #include <vm/vm_kern.h>
81 #include <vm/vm_object.h>
82 #include <vm/vm_page.h>
83 #include <vm/vm_map.h>
84 #include <vm/vm_pager.h>
85 #include <vm/vm_extern.h>
87 #include <sys/thread2.h>
88 #include <sys/mplock2.h>
89 #include <sys/mutex2.h>
97 #include <machine/cpu.h>
98 #include <machine/clock.h>
99 #include <machine/specialreg.h>
101 #include <machine/bootinfo.h>
103 #include <machine/md_var.h>
104 #include <machine/metadata.h>
105 #include <machine/pc/bios.h>
106 #include <machine/pcb_ext.h> /* pcb.h included via sys/user.h */
107 #include <machine/globaldata.h> /* CPU_prvspace */
108 #include <machine/smp.h>
110 #include <machine/perfmon.h>
112 #include <machine/cputypes.h>
113 #include <machine/intr_machdep.h>
116 #include <bus/isa/isa_device.h>
118 #include <machine_base/isa/isa_intr.h>
119 #include <bus/isa/rtc.h>
120 #include <sys/random.h>
121 #include <sys/ptrace.h>
122 #include <machine/sigframe.h>
124 #include <sys/machintr.h>
125 #include <machine_base/icu/icu_abi.h>
126 #include <machine_base/icu/elcr_var.h>
127 #include <machine_base/apic/lapic.h>
128 #include <machine_base/apic/ioapic.h>
129 #include <machine_base/apic/ioapic_abi.h>
130 #include <machine/mptable.h>
132 #define PHYSMAP_ENTRIES 10
134 extern u_int64_t hammer_time(u_int64_t, u_int64_t);
136 extern void printcpuinfo(void); /* XXX header file */
137 extern void identify_cpu(void);
139 extern void finishidentcpu(void);
141 extern void panicifcpuunsupported(void);
143 static void cpu_startup(void *);
144 static void pic_finish(void *);
145 static void cpu_finish(void *);
147 static void set_fpregs_xmm(struct save87 *, struct savexmm *);
148 static void fill_fpregs_xmm(struct savexmm *, struct save87 *);
150 extern void ffs_rawread_setup(void);
151 #endif /* DIRECTIO */
152 static void init_locks(void);
154 SYSINIT(cpu, SI_BOOT2_START_CPU, SI_ORDER_FIRST, cpu_startup, NULL);
155 SYSINIT(pic_finish, SI_BOOT2_FINISH_PIC, SI_ORDER_FIRST, pic_finish, NULL);
156 SYSINIT(cpu_finish, SI_BOOT2_FINISH_CPU, SI_ORDER_FIRST, cpu_finish, NULL);
159 extern vm_offset_t ksym_start, ksym_end;
162 struct privatespace CPU_prvspace_bsp __aligned(4096);
163 struct privatespace *CPU_prvspace[MAXCPU] = { &CPU_prvspace_bsp };
165 int _udatasel, _ucodesel, _ucode32sel;
167 int64_t tsc_offsets[MAXCPU];
169 static int cpu_mwait_halt; /* MWAIT hint (EAX) or CPU_MWAIT_HINT_ */
171 #if defined(SWTCH_OPTIM_STATS)
172 extern int swtch_optim_stats;
173 SYSCTL_INT(_debug, OID_AUTO, swtch_optim_stats,
174 CTLFLAG_RD, &swtch_optim_stats, 0, "");
175 SYSCTL_INT(_debug, OID_AUTO, tlb_flush_count,
176 CTLFLAG_RD, &tlb_flush_count, 0, "");
178 SYSCTL_INT(_hw, OID_AUTO, cpu_mwait_halt,
179 CTLFLAG_RD, &cpu_mwait_halt, 0, "");
180 SYSCTL_INT(_hw, OID_AUTO, cpu_mwait_spin, CTLFLAG_RD, &cpu_mwait_spin, 0,
181 "monitor/mwait target state");
183 #define CPU_MWAIT_C1 1
184 #define CPU_MWAIT_C2 2
185 #define CPU_MWAIT_C3 3
186 #define CPU_MWAIT_CX_MAX 8
188 #define CPU_MWAIT_HINT_AUTO -1 /* C1 and C2 */
189 #define CPU_MWAIT_HINT_AUTODEEP -2 /* C3+ */
191 SYSCTL_NODE(_machdep, OID_AUTO, mwait, CTLFLAG_RW, 0, "MWAIT features");
192 SYSCTL_NODE(_machdep_mwait, OID_AUTO, CX, CTLFLAG_RW, 0, "MWAIT Cx settings");
194 struct cpu_mwait_cx {
197 struct sysctl_ctx_list sysctl_ctx;
198 struct sysctl_oid *sysctl_tree;
200 static struct cpu_mwait_cx cpu_mwait_cx_info[CPU_MWAIT_CX_MAX];
201 static char cpu_mwait_cx_supported[256];
203 static int cpu_mwait_c1_hints_cnt;
204 static int cpu_mwait_hints_cnt;
205 static int *cpu_mwait_hints;
207 static int cpu_mwait_deep_hints_cnt;
208 static int *cpu_mwait_deep_hints;
210 #define CPU_IDLE_REPEAT_DEFAULT 750
212 static u_int cpu_idle_repeat = CPU_IDLE_REPEAT_DEFAULT;
213 static u_long cpu_idle_repeat_max = CPU_IDLE_REPEAT_DEFAULT;
214 static u_int cpu_mwait_repeat_shift = 1;
216 #define CPU_MWAIT_C3_PREAMBLE_BM_ARB 0x1
217 #define CPU_MWAIT_C3_PREAMBLE_BM_STS 0x2
219 static int cpu_mwait_c3_preamble =
220 CPU_MWAIT_C3_PREAMBLE_BM_ARB |
221 CPU_MWAIT_C3_PREAMBLE_BM_STS;
223 SYSCTL_STRING(_machdep_mwait_CX, OID_AUTO, supported, CTLFLAG_RD,
224 cpu_mwait_cx_supported, 0, "MWAIT supported C states");
226 static struct lwkt_serialize cpu_mwait_cx_slize = LWKT_SERIALIZE_INITIALIZER;
227 static int cpu_mwait_cx_select_sysctl(SYSCTL_HANDLER_ARGS,
229 static int cpu_mwait_cx_idle_sysctl(SYSCTL_HANDLER_ARGS);
230 static int cpu_mwait_cx_spin_sysctl(SYSCTL_HANDLER_ARGS);
232 SYSCTL_PROC(_machdep_mwait_CX, OID_AUTO, idle, CTLTYPE_STRING|CTLFLAG_RW,
233 NULL, 0, cpu_mwait_cx_idle_sysctl, "A", "");
234 SYSCTL_PROC(_machdep_mwait_CX, OID_AUTO, spin, CTLTYPE_STRING|CTLFLAG_RW,
235 NULL, 0, cpu_mwait_cx_spin_sysctl, "A", "");
236 SYSCTL_UINT(_machdep_mwait_CX, OID_AUTO, repeat_shift, CTLFLAG_RW,
237 &cpu_mwait_repeat_shift, 0, "");
241 u_long ebda_addr = 0;
243 int imcr_present = 0;
245 int naps = 0; /* # of Applications processors */
248 struct mtx dt_lock; /* lock for GDT and LDT */
251 sysctl_hw_physmem(SYSCTL_HANDLER_ARGS)
253 u_long pmem = ctob(physmem);
255 int error = sysctl_handle_long(oidp, &pmem, 0, req);
259 SYSCTL_PROC(_hw, HW_PHYSMEM, physmem, CTLTYPE_ULONG|CTLFLAG_RD,
260 0, 0, sysctl_hw_physmem, "LU", "Total system memory in bytes (number of pages * page size)");
263 sysctl_hw_usermem(SYSCTL_HANDLER_ARGS)
265 int error = sysctl_handle_int(oidp, 0,
266 ctob(physmem - vmstats.v_wire_count), req);
270 SYSCTL_PROC(_hw, HW_USERMEM, usermem, CTLTYPE_INT|CTLFLAG_RD,
271 0, 0, sysctl_hw_usermem, "IU", "");
274 sysctl_hw_availpages(SYSCTL_HANDLER_ARGS)
276 int error = sysctl_handle_int(oidp, 0,
277 x86_64_btop(avail_end - avail_start), req);
281 SYSCTL_PROC(_hw, OID_AUTO, availpages, CTLTYPE_INT|CTLFLAG_RD,
282 0, 0, sysctl_hw_availpages, "I", "");
288 * The number of PHYSMAP entries must be one less than the number of
289 * PHYSSEG entries because the PHYSMAP entry that spans the largest
290 * physical address that is accessible by ISA DMA is split into two
293 #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1))
295 vm_paddr_t phys_avail[PHYSMAP_SIZE + 2];
296 vm_paddr_t dump_avail[PHYSMAP_SIZE + 2];
298 /* must be 2 less so 0 0 can signal end of chunks */
299 #define PHYS_AVAIL_ARRAY_END (NELEM(phys_avail) - 2)
300 #define DUMP_AVAIL_ARRAY_END (NELEM(dump_avail) - 2)
302 static vm_offset_t buffer_sva, buffer_eva;
303 vm_offset_t clean_sva, clean_eva;
304 static vm_offset_t pager_sva, pager_eva;
305 static struct trapframe proc0_tf;
308 cpu_startup(void *dummy)
312 vm_offset_t firstaddr;
315 * Good {morning,afternoon,evening,night}.
317 kprintf("%s", version);
320 panicifcpuunsupported();
324 kprintf("real memory = %ju (%ju MB)\n",
326 (intmax_t)Realmem / 1024 / 1024);
328 * Display any holes after the first chunk of extended memory.
333 kprintf("Physical memory chunk(s):\n");
334 for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) {
335 vm_paddr_t size1 = phys_avail[indx + 1] - phys_avail[indx];
337 kprintf("0x%08jx - 0x%08jx, %ju bytes (%ju pages)\n",
338 (intmax_t)phys_avail[indx],
339 (intmax_t)phys_avail[indx + 1] - 1,
341 (intmax_t)(size1 / PAGE_SIZE));
346 * Allocate space for system data structures.
347 * The first available kernel virtual address is in "v".
348 * As pages of kernel virtual memory are allocated, "v" is incremented.
349 * As pages of memory are allocated and cleared,
350 * "firstaddr" is incremented.
351 * An index into the kernel page table corresponding to the
352 * virtual memory address maintained in "v" is kept in "mapaddr".
356 * Make two passes. The first pass calculates how much memory is
357 * needed and allocates it. The second pass assigns virtual
358 * addresses to the various data structures.
362 v = (caddr_t)firstaddr;
364 #define valloc(name, type, num) \
365 (name) = (type *)v; v = (caddr_t)((name)+(num))
366 #define valloclim(name, type, num, lim) \
367 (name) = (type *)v; v = (caddr_t)((lim) = ((name)+(num)))
370 * The nominal buffer size (and minimum KVA allocation) is BKVASIZE.
371 * For the first 64MB of ram nominally allocate sufficient buffers to
372 * cover 1/4 of our ram. Beyond the first 64MB allocate additional
373 * buffers to cover 1/20 of our ram over 64MB. When auto-sizing
374 * the buffer cache we limit the eventual kva reservation to
377 * factor represents the 1/4 x ram conversion.
380 long factor = 4 * BKVASIZE / 1024;
381 long kbytes = physmem * (PAGE_SIZE / 1024);
385 nbuf += min((kbytes - 4096) / factor, 65536 / factor);
387 nbuf += (kbytes - 65536) * 2 / (factor * 5);
388 if (maxbcache && nbuf > maxbcache / BKVASIZE)
389 nbuf = maxbcache / BKVASIZE;
393 * Do not allow the buffer_map to be more then 1/2 the size of the
396 if (nbuf > (virtual_end - virtual_start +
397 virtual2_end - virtual2_start) / (BKVASIZE * 2)) {
398 nbuf = (virtual_end - virtual_start +
399 virtual2_end - virtual2_start) / (BKVASIZE * 2);
400 kprintf("Warning: nbufs capped at %ld due to kvm\n", nbuf);
404 * Do not allow the buffer_map to use more than 50% of available
405 * physical-equivalent memory. Since the VM pages which back
406 * individual buffers are typically wired, having too many bufs
407 * can prevent the system from paging properly.
409 if (nbuf > physmem * PAGE_SIZE / (BKVASIZE * 2)) {
410 nbuf = physmem * PAGE_SIZE / (BKVASIZE * 2);
411 kprintf("Warning: nbufs capped at %ld due to physmem\n", nbuf);
415 * Do not allow the sizeof(struct buf) * nbuf to exceed half of
416 * the valloc space which is just the virtual_end - virtual_start
417 * section. We use valloc() to allocate the buf header array.
419 if (nbuf > (virtual_end - virtual_start) / sizeof(struct buf) / 2) {
420 nbuf = (virtual_end - virtual_start) /
421 sizeof(struct buf) / 2;
422 kprintf("Warning: nbufs capped at %ld due to valloc "
423 "considerations", nbuf);
426 nswbuf = lmax(lmin(nbuf / 4, 256), 16);
428 if (nswbuf < NSWBUF_MIN)
435 valloc(swbuf, struct buf, nswbuf);
436 valloc(buf, struct buf, nbuf);
439 * End of first pass, size has been calculated so allocate memory
441 if (firstaddr == 0) {
442 size = (vm_size_t)(v - firstaddr);
443 firstaddr = kmem_alloc(&kernel_map, round_page(size));
445 panic("startup: no room for tables");
450 * End of second pass, addresses have been assigned
452 * nbuf is an int, make sure we don't overflow the field.
454 * On 64-bit systems we always reserve maximal allocations for
455 * buffer cache buffers and there are no fragmentation issues,
456 * so the KVA segment does not have to be excessively oversized.
458 if ((vm_size_t)(v - firstaddr) != size)
459 panic("startup: table size inconsistency");
461 kmem_suballoc(&kernel_map, &clean_map, &clean_sva, &clean_eva,
462 ((vm_offset_t)(nbuf + 16) * BKVASIZE) +
463 (nswbuf * MAXPHYS) + pager_map_size);
464 kmem_suballoc(&clean_map, &buffer_map, &buffer_sva, &buffer_eva,
465 ((vm_offset_t)(nbuf + 16) * BKVASIZE));
466 buffer_map.system_map = 1;
467 kmem_suballoc(&clean_map, &pager_map, &pager_sva, &pager_eva,
468 ((vm_offset_t)nswbuf * MAXPHYS) + pager_map_size);
469 pager_map.system_map = 1;
471 #if defined(USERCONFIG)
473 cninit(); /* the preferred console may have changed */
476 kprintf("avail memory = %ju (%ju MB)\n",
477 (uintmax_t)ptoa(vmstats.v_free_count + vmstats.v_dma_pages),
478 (uintmax_t)ptoa(vmstats.v_free_count + vmstats.v_dma_pages) /
482 struct cpu_idle_stat {
488 u_long mwait_cx[CPU_MWAIT_CX_MAX];
491 #define CPU_IDLE_STAT_HALT -1
492 #define CPU_IDLE_STAT_SPIN -2
494 static struct cpu_idle_stat cpu_idle_stats[MAXCPU];
497 sysctl_cpu_idle_cnt(SYSCTL_HANDLER_ARGS)
499 int idx = arg2, cpu, error;
502 if (idx == CPU_IDLE_STAT_HALT) {
503 for (cpu = 0; cpu < ncpus; ++cpu)
504 val += cpu_idle_stats[cpu].halt;
505 } else if (idx == CPU_IDLE_STAT_SPIN) {
506 for (cpu = 0; cpu < ncpus; ++cpu)
507 val += cpu_idle_stats[cpu].spin;
509 KASSERT(idx >= 0 && idx < CPU_MWAIT_CX_MAX,
510 ("invalid index %d", idx));
511 for (cpu = 0; cpu < ncpus; ++cpu)
512 val += cpu_idle_stats[cpu].mwait_cx[idx];
515 error = sysctl_handle_quad(oidp, &val, 0, req);
516 if (error || req->newptr == NULL)
519 if (idx == CPU_IDLE_STAT_HALT) {
520 for (cpu = 0; cpu < ncpus; ++cpu)
521 cpu_idle_stats[cpu].halt = 0;
522 cpu_idle_stats[0].halt = val;
523 } else if (idx == CPU_IDLE_STAT_SPIN) {
524 for (cpu = 0; cpu < ncpus; ++cpu)
525 cpu_idle_stats[cpu].spin = 0;
526 cpu_idle_stats[0].spin = val;
528 KASSERT(idx >= 0 && idx < CPU_MWAIT_CX_MAX,
529 ("invalid index %d", idx));
530 for (cpu = 0; cpu < ncpus; ++cpu)
531 cpu_idle_stats[cpu].mwait_cx[idx] = 0;
532 cpu_idle_stats[0].mwait_cx[idx] = val;
538 cpu_mwait_attach(void)
543 if ((cpu_feature2 & CPUID2_MON) == 0 ||
544 (cpu_mwait_feature & CPUID_MWAIT_EXT) == 0)
547 if (cpu_vendor_id == CPU_VENDOR_INTEL &&
548 (CPUID_TO_FAMILY(cpu_id) > 0xf ||
549 (CPUID_TO_FAMILY(cpu_id) == 0x6 &&
550 CPUID_TO_MODEL(cpu_id) >= 0xf))) {
554 * Pentium dual-core, Core 2 and beyond do not need any
555 * additional activities to enter deep C-state, i.e. C3(+).
557 cpu_mwait_cx_no_bmarb();
559 TUNABLE_INT_FETCH("machdep.cpu.mwait.bm_sts", &bm_sts);
561 cpu_mwait_cx_no_bmsts();
564 sbuf_new(&sb, cpu_mwait_cx_supported,
565 sizeof(cpu_mwait_cx_supported), SBUF_FIXEDLEN);
567 for (i = 0; i < CPU_MWAIT_CX_MAX; ++i) {
568 struct cpu_mwait_cx *cx = &cpu_mwait_cx_info[i];
571 ksnprintf(cx->name, sizeof(cx->name), "C%d", i);
573 sysctl_ctx_init(&cx->sysctl_ctx);
574 cx->sysctl_tree = SYSCTL_ADD_NODE(&cx->sysctl_ctx,
575 SYSCTL_STATIC_CHILDREN(_machdep_mwait), OID_AUTO,
576 cx->name, CTLFLAG_RW, NULL, "Cx control/info");
577 if (cx->sysctl_tree == NULL)
580 cx->subcnt = CPUID_MWAIT_CX_SUBCNT(cpu_mwait_extemu, i);
581 SYSCTL_ADD_INT(&cx->sysctl_ctx,
582 SYSCTL_CHILDREN(cx->sysctl_tree), OID_AUTO,
583 "subcnt", CTLFLAG_RD, &cx->subcnt, 0,
585 SYSCTL_ADD_PROC(&cx->sysctl_ctx,
586 SYSCTL_CHILDREN(cx->sysctl_tree), OID_AUTO,
587 "entered", (CTLTYPE_QUAD | CTLFLAG_RW), 0,
588 i, sysctl_cpu_idle_cnt, "Q", "# of times entered");
590 for (sub = 0; sub < cx->subcnt; ++sub)
591 sbuf_printf(&sb, "C%d/%d ", i, sub);
599 cpu_mwait_c1_hints_cnt = cpu_mwait_cx_info[CPU_MWAIT_C1].subcnt;
600 for (i = CPU_MWAIT_C1; i < CPU_MWAIT_C3; ++i)
601 cpu_mwait_hints_cnt += cpu_mwait_cx_info[i].subcnt;
602 cpu_mwait_hints = kmalloc(sizeof(int) * cpu_mwait_hints_cnt,
606 for (i = CPU_MWAIT_C1; i < CPU_MWAIT_C3; ++i) {
609 subcnt = cpu_mwait_cx_info[i].subcnt;
610 for (j = 0; j < subcnt; ++j) {
611 KASSERT(hint_idx < cpu_mwait_hints_cnt,
612 ("invalid mwait hint index %d", hint_idx));
613 cpu_mwait_hints[hint_idx] = MWAIT_EAX_HINT(i, j);
617 KASSERT(hint_idx == cpu_mwait_hints_cnt,
618 ("mwait hint count %d != index %d",
619 cpu_mwait_hints_cnt, hint_idx));
622 kprintf("MWAIT hints (%d C1 hints):\n", cpu_mwait_c1_hints_cnt);
623 for (i = 0; i < cpu_mwait_hints_cnt; ++i) {
624 int hint = cpu_mwait_hints[i];
626 kprintf(" C%d/%d hint 0x%04x\n",
627 MWAIT_EAX_TO_CX(hint), MWAIT_EAX_TO_CX_SUB(hint),
635 for (i = CPU_MWAIT_C1; i < CPU_MWAIT_CX_MAX; ++i)
636 cpu_mwait_deep_hints_cnt += cpu_mwait_cx_info[i].subcnt;
637 cpu_mwait_deep_hints = kmalloc(sizeof(int) * cpu_mwait_deep_hints_cnt,
641 for (i = CPU_MWAIT_C1; i < CPU_MWAIT_CX_MAX; ++i) {
644 subcnt = cpu_mwait_cx_info[i].subcnt;
645 for (j = 0; j < subcnt; ++j) {
646 KASSERT(hint_idx < cpu_mwait_deep_hints_cnt,
647 ("invalid mwait deep hint index %d", hint_idx));
648 cpu_mwait_deep_hints[hint_idx] = MWAIT_EAX_HINT(i, j);
652 KASSERT(hint_idx == cpu_mwait_deep_hints_cnt,
653 ("mwait deep hint count %d != index %d",
654 cpu_mwait_deep_hints_cnt, hint_idx));
657 kprintf("MWAIT deep hints:\n");
658 for (i = 0; i < cpu_mwait_deep_hints_cnt; ++i) {
659 int hint = cpu_mwait_deep_hints[i];
661 kprintf(" C%d/%d hint 0x%04x\n",
662 MWAIT_EAX_TO_CX(hint), MWAIT_EAX_TO_CX_SUB(hint),
666 cpu_idle_repeat_max = 256 * cpu_mwait_deep_hints_cnt;
670 cpu_finish(void *dummy __unused)
677 pic_finish(void *dummy __unused)
679 /* Log ELCR information */
682 /* Log MPTABLE information */
683 mptable_pci_int_dump();
686 MachIntrABI.finalize();
690 * Send an interrupt to process.
692 * Stack is set up to allow sigcode stored
693 * at top to call routine, followed by kcall
694 * to sigreturn routine below. After sigreturn
695 * resets the signal mask, the stack, and the
696 * frame pointer, it returns to the user
700 sendsig(sig_t catcher, int sig, sigset_t *mask, u_long code)
702 struct lwp *lp = curthread->td_lwp;
703 struct proc *p = lp->lwp_proc;
704 struct trapframe *regs;
705 struct sigacts *psp = p->p_sigacts;
706 struct sigframe sf, *sfp;
710 regs = lp->lwp_md.md_regs;
711 oonstack = (lp->lwp_sigstk.ss_flags & SS_ONSTACK) ? 1 : 0;
713 /* Save user context */
714 bzero(&sf, sizeof(struct sigframe));
715 sf.sf_uc.uc_sigmask = *mask;
716 sf.sf_uc.uc_stack = lp->lwp_sigstk;
717 sf.sf_uc.uc_mcontext.mc_onstack = oonstack;
718 KKASSERT(__offsetof(struct trapframe, tf_rdi) == 0);
719 bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(struct trapframe));
721 /* Make the size of the saved context visible to userland */
722 sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext);
724 /* Allocate and validate space for the signal handler context. */
725 if ((lp->lwp_flags & LWP_ALTSTACK) != 0 && !oonstack &&
726 SIGISMEMBER(psp->ps_sigonstack, sig)) {
727 sp = (char *)(lp->lwp_sigstk.ss_sp + lp->lwp_sigstk.ss_size -
728 sizeof(struct sigframe));
729 lp->lwp_sigstk.ss_flags |= SS_ONSTACK;
731 /* We take red zone into account */
732 sp = (char *)regs->tf_rsp - sizeof(struct sigframe) - 128;
736 * XXX AVX needs 64-byte alignment but sigframe has other fields and
737 * the embedded ucontext is not at the front, so aligning this won't
738 * help us. Fortunately we bcopy in/out of the sigframe, so the
741 * The problem though is if userland winds up trying to use the
744 sfp = (struct sigframe *)((intptr_t)sp & ~(intptr_t)0xF);
746 /* Translate the signal is appropriate */
747 if (p->p_sysent->sv_sigtbl) {
748 if (sig <= p->p_sysent->sv_sigsize)
749 sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)];
753 * Build the argument list for the signal handler.
755 * Arguments are in registers (%rdi, %rsi, %rdx, %rcx)
757 regs->tf_rdi = sig; /* argument 1 */
758 regs->tf_rdx = (register_t)&sfp->sf_uc; /* argument 3 */
760 if (SIGISMEMBER(psp->ps_siginfo, sig)) {
762 * Signal handler installed with SA_SIGINFO.
764 * action(signo, siginfo, ucontext)
766 regs->tf_rsi = (register_t)&sfp->sf_si; /* argument 2 */
767 regs->tf_rcx = (register_t)regs->tf_addr; /* argument 4 */
768 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;
770 /* fill siginfo structure */
771 sf.sf_si.si_signo = sig;
772 sf.sf_si.si_code = code;
773 sf.sf_si.si_addr = (void *)regs->tf_addr;
776 * Old FreeBSD-style arguments.
778 * handler (signo, code, [uc], addr)
780 regs->tf_rsi = (register_t)code; /* argument 2 */
781 regs->tf_rcx = (register_t)regs->tf_addr; /* argument 4 */
782 sf.sf_ahu.sf_handler = catcher;
786 * If we're a vm86 process, we want to save the segment registers.
787 * We also change eflags to be our emulated eflags, not the actual
791 if (regs->tf_eflags & PSL_VM) {
792 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
793 struct vm86_kernel *vm86 = &lp->lwp_thread->td_pcb->pcb_ext->ext_vm86;
795 sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs;
796 sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs;
797 sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es;
798 sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds;
800 if (vm86->vm86_has_vme == 0)
801 sf.sf_uc.uc_mcontext.mc_eflags =
802 (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
803 (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));
806 * Clear PSL_NT to inhibit T_TSSFLT faults on return from
807 * syscalls made by the signal handler. This just avoids
808 * wasting time for our lazy fixup of such faults. PSL_NT
809 * does nothing in vm86 mode, but vm86 programs can set it
810 * almost legitimately in probes for old cpu types.
812 tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
817 * Save the FPU state and reinit the FP unit
819 npxpush(&sf.sf_uc.uc_mcontext);
822 * Copy the sigframe out to the user's stack.
824 if (copyout(&sf, sfp, sizeof(struct sigframe)) != 0) {
826 * Something is wrong with the stack pointer.
827 * ...Kill the process.
832 regs->tf_rsp = (register_t)sfp;
833 regs->tf_rip = PS_STRINGS - *(p->p_sysent->sv_szsigcode);
836 * i386 abi specifies that the direction flag must be cleared
839 regs->tf_rflags &= ~(PSL_T|PSL_D);
842 * 64 bit mode has a code and stack selector but
843 * no data or extra selector. %fs and %gs are not
846 regs->tf_cs = _ucodesel;
847 regs->tf_ss = _udatasel;
852 * Sanitize the trapframe for a virtual kernel passing control to a custom
853 * VM context. Remove any items that would otherwise create a privilage
856 * XXX at the moment we allow userland to set the resume flag. Is this a
860 cpu_sanitize_frame(struct trapframe *frame)
862 frame->tf_cs = _ucodesel;
863 frame->tf_ss = _udatasel;
864 /* XXX VM (8086) mode not supported? */
865 frame->tf_rflags &= (PSL_RF | PSL_USERCHANGE | PSL_VM_UNSUPP);
866 frame->tf_rflags |= PSL_RESERVED_DEFAULT | PSL_I;
872 * Sanitize the tls so loading the descriptor does not blow up
873 * on us. For x86_64 we don't have to do anything.
876 cpu_sanitize_tls(struct savetls *tls)
882 * sigreturn(ucontext_t *sigcntxp)
884 * System call to cleanup state after a signal
885 * has been taken. Reset signal mask and
886 * stack state from context left by sendsig (above).
887 * Return to previous pc and psl as specified by
888 * context left by sendsig. Check carefully to
889 * make sure that the user has not modified the
890 * state to gain improper privileges.
894 #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0)
895 #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL)
898 sys_sigreturn(struct sigreturn_args *uap)
900 struct lwp *lp = curthread->td_lwp;
901 struct trapframe *regs;
909 * We have to copy the information into kernel space so userland
910 * can't modify it while we are sniffing it.
912 regs = lp->lwp_md.md_regs;
913 error = copyin(uap->sigcntxp, &uc, sizeof(uc));
917 rflags = ucp->uc_mcontext.mc_rflags;
919 /* VM (8086) mode not supported */
920 rflags &= ~PSL_VM_UNSUPP;
923 if (eflags & PSL_VM) {
924 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
925 struct vm86_kernel *vm86;
928 * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
929 * set up the vm86 area, and we can't enter vm86 mode.
931 if (lp->lwp_thread->td_pcb->pcb_ext == 0)
933 vm86 = &lp->lwp_thread->td_pcb->pcb_ext->ext_vm86;
934 if (vm86->vm86_inited == 0)
937 /* go back to user mode if both flags are set */
938 if ((eflags & PSL_VIP) && (eflags & PSL_VIF))
939 trapsignal(lp, SIGBUS, 0);
941 if (vm86->vm86_has_vme) {
942 eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
943 (eflags & VME_USERCHANGE) | PSL_VM;
945 vm86->vm86_eflags = eflags; /* save VIF, VIP */
946 eflags = (tf->tf_eflags & ~VM_USERCHANGE) |
947 (eflags & VM_USERCHANGE) | PSL_VM;
949 bcopy(&ucp->uc_mcontext.mc_gs, tf, sizeof(struct trapframe));
950 tf->tf_eflags = eflags;
951 tf->tf_vm86_ds = tf->tf_ds;
952 tf->tf_vm86_es = tf->tf_es;
953 tf->tf_vm86_fs = tf->tf_fs;
954 tf->tf_vm86_gs = tf->tf_gs;
955 tf->tf_ds = _udatasel;
956 tf->tf_es = _udatasel;
957 tf->tf_fs = _udatasel;
958 tf->tf_gs = _udatasel;
963 * Don't allow users to change privileged or reserved flags.
966 * XXX do allow users to change the privileged flag PSL_RF.
967 * The cpu sets PSL_RF in tf_eflags for faults. Debuggers
968 * should sometimes set it there too. tf_eflags is kept in
969 * the signal context during signal handling and there is no
970 * other place to remember it, so the PSL_RF bit may be
971 * corrupted by the signal handler without us knowing.
972 * Corruption of the PSL_RF bit at worst causes one more or
973 * one less debugger trap, so allowing it is fairly harmless.
975 if (!EFL_SECURE(rflags & ~PSL_RF, regs->tf_rflags & ~PSL_RF)) {
976 kprintf("sigreturn: rflags = 0x%lx\n", (long)rflags);
981 * Don't allow users to load a valid privileged %cs. Let the
982 * hardware check for invalid selectors, excess privilege in
983 * other selectors, invalid %eip's and invalid %esp's.
985 cs = ucp->uc_mcontext.mc_cs;
986 if (!CS_SECURE(cs)) {
987 kprintf("sigreturn: cs = 0x%x\n", cs);
988 trapsignal(lp, SIGBUS, T_PROTFLT);
991 bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(struct trapframe));
995 * Restore the FPU state from the frame
998 npxpop(&ucp->uc_mcontext);
1000 if (ucp->uc_mcontext.mc_onstack & 1)
1001 lp->lwp_sigstk.ss_flags |= SS_ONSTACK;
1003 lp->lwp_sigstk.ss_flags &= ~SS_ONSTACK;
1005 lp->lwp_sigmask = ucp->uc_sigmask;
1006 SIG_CANTMASK(lp->lwp_sigmask);
1009 return(EJUSTRETURN);
1013 * Machine dependent boot() routine
1015 * I haven't seen anything to put here yet
1016 * Possibly some stuff might be grafted back here from boot()
1024 * Shutdown the CPU as much as possible
1030 __asm__ __volatile("hlt");
1034 * cpu_idle() represents the idle LWKT. You cannot return from this function
1035 * (unless you want to blow things up!). Instead we look for runnable threads
1036 * and loop or halt as appropriate. Giant is not held on entry to the thread.
1038 * The main loop is entered with a critical section held, we must release
1039 * the critical section before doing anything else. lwkt_switch() will
1040 * check for pending interrupts due to entering and exiting its own
1043 * NOTE: On an SMP system we rely on a scheduler IPI to wake a HLTed cpu up.
1044 * However, there are cases where the idlethread will be entered with
1045 * the possibility that no IPI will occur and in such cases
1046 * lwkt_switch() sets TDF_IDLE_NOHLT.
1048 * NOTE: cpu_idle_repeat determines how many entries into the idle thread
1049 * must occur before it starts using ACPI halt.
1051 static int cpu_idle_hlt = 2;
1052 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hlt, CTLFLAG_RW,
1053 &cpu_idle_hlt, 0, "Idle loop HLT enable");
1054 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_repeat, CTLFLAG_RW,
1055 &cpu_idle_repeat, 0, "Idle entries before acpi hlt");
1057 SYSCTL_PROC(_machdep, OID_AUTO, cpu_idle_hltcnt, (CTLTYPE_QUAD | CTLFLAG_RW),
1058 0, CPU_IDLE_STAT_HALT, sysctl_cpu_idle_cnt, "Q", "Idle loop entry halts");
1059 SYSCTL_PROC(_machdep, OID_AUTO, cpu_idle_spincnt, (CTLTYPE_QUAD | CTLFLAG_RW),
1060 0, CPU_IDLE_STAT_SPIN, sysctl_cpu_idle_cnt, "Q", "Idle loop entry spins");
1063 cpu_idle_default_hook(void)
1066 * We must guarentee that hlt is exactly the instruction
1067 * following the sti.
1069 __asm __volatile("sti; hlt");
1072 /* Other subsystems (e.g., ACPI) can hook this later. */
1073 void (*cpu_idle_hook)(void) = cpu_idle_default_hook;
1076 cpu_mwait_cx_hint(struct cpu_idle_stat *stat)
1081 if (cpu_mwait_halt >= 0) {
1082 hint = cpu_mwait_halt;
1086 idx = (stat->repeat + stat->repeat_last + stat->repeat_delta) >>
1087 cpu_mwait_repeat_shift;
1088 if (idx >= cpu_mwait_c1_hints_cnt) {
1089 /* Step up faster, once we walked through all C1 states */
1090 stat->repeat_delta += 1 << (cpu_mwait_repeat_shift + 1);
1092 if (cpu_mwait_halt == CPU_MWAIT_HINT_AUTODEEP) {
1093 if (idx >= cpu_mwait_deep_hints_cnt)
1094 idx = cpu_mwait_deep_hints_cnt - 1;
1095 hint = cpu_mwait_deep_hints[idx];
1097 if (idx >= cpu_mwait_hints_cnt)
1098 idx = cpu_mwait_hints_cnt - 1;
1099 hint = cpu_mwait_hints[idx];
1102 cx_idx = MWAIT_EAX_TO_CX(hint);
1103 if (cx_idx >= 0 && cx_idx < CPU_MWAIT_CX_MAX)
1104 stat->mwait_cx[cx_idx]++;
1111 globaldata_t gd = mycpu;
1112 struct cpu_idle_stat *stat = &cpu_idle_stats[gd->gd_cpuid];
1113 struct thread *td __debugvar = gd->gd_curthread;
1117 stat->repeat = stat->repeat_last = cpu_idle_repeat_max;
1120 KKASSERT(td->td_critcount == 0);
1124 * See if there are any LWKTs ready to go.
1129 * When halting inside a cli we must check for reqflags
1130 * races, particularly [re]schedule requests. Running
1131 * splz() does the job.
1134 * 0 Never halt, just spin
1136 * 1 Always use HLT (or MONITOR/MWAIT if avail).
1137 * This typically eats more power than the
1140 * 2 Use HLT/MONITOR/MWAIT up to a point and then
1141 * use the ACPI halt (default). This is a hybrid
1142 * approach. See machdep.cpu_idle_repeat.
1144 * 3 Always use the ACPI halt. This typically
1145 * eats the least amount of power but the cpu
1146 * will be slow waking up. Slows down e.g.
1147 * compiles and other pipe/event oriented stuff.
1151 * NOTE: Interrupts are enabled and we are not in a critical
1154 * NOTE: Preemptions do not reset gd_idle_repeat. Also we
1155 * don't bother capping gd_idle_repeat, it is ok if
1158 if (gd->gd_idle_repeat == 0) {
1159 stat->repeat = (stat->repeat + stat->repeat_last) >> 1;
1160 if (stat->repeat > cpu_idle_repeat_max)
1161 stat->repeat = cpu_idle_repeat_max;
1162 stat->repeat_last = 0;
1163 stat->repeat_delta = 0;
1165 ++stat->repeat_last;
1167 ++gd->gd_idle_repeat;
1168 reqflags = gd->gd_reqflags;
1169 quick = (cpu_idle_hlt == 1) ||
1170 (cpu_idle_hlt < 3 &&
1171 gd->gd_idle_repeat < cpu_idle_repeat);
1173 if (quick && (cpu_mi_feature & CPU_MI_MONITOR) &&
1174 (reqflags & RQF_IDLECHECK_WK_MASK) == 0) {
1176 cpu_mmw_pause_int(&gd->gd_reqflags, reqflags,
1177 cpu_mwait_cx_hint(stat), 0);
1179 } else if (cpu_idle_hlt) {
1180 __asm __volatile("cli");
1182 if ((gd->gd_reqflags & RQF_IDLECHECK_WK_MASK) == 0) {
1184 cpu_idle_default_hook();
1188 __asm __volatile("sti");
1192 __asm __volatile("sti");
1199 * This routine is called if a spinlock has been held through the
1200 * exponential backoff period and is seriously contested. On a real cpu
1204 cpu_spinlock_contested(void)
1210 * Clear registers on exec
1213 exec_setregs(u_long entry, u_long stack, u_long ps_strings)
1215 struct thread *td = curthread;
1216 struct lwp *lp = td->td_lwp;
1217 struct pcb *pcb = td->td_pcb;
1218 struct trapframe *regs = lp->lwp_md.md_regs;
1220 /* was i386_user_cleanup() in NetBSD */
1224 bzero((char *)regs, sizeof(struct trapframe));
1225 regs->tf_rip = entry;
1226 regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; /* align the stack */
1227 regs->tf_rdi = stack; /* argv */
1228 regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T);
1229 regs->tf_ss = _udatasel;
1230 regs->tf_cs = _ucodesel;
1231 regs->tf_rbx = ps_strings;
1234 * Reset the hardware debug registers if they were in use.
1235 * They won't have any meaning for the newly exec'd process.
1237 if (pcb->pcb_flags & PCB_DBREGS) {
1243 pcb->pcb_dr7 = 0; /* JG set bit 10? */
1244 if (pcb == td->td_pcb) {
1246 * Clear the debug registers on the running
1247 * CPU, otherwise they will end up affecting
1248 * the next process we switch to.
1252 pcb->pcb_flags &= ~PCB_DBREGS;
1256 * Initialize the math emulator (if any) for the current process.
1257 * Actually, just clear the bit that says that the emulator has
1258 * been initialized. Initialization is delayed until the process
1259 * traps to the emulator (if it is done at all) mainly because
1260 * emulators don't provide an entry point for initialization.
1262 pcb->pcb_flags &= ~FP_SOFTFP;
1265 * NOTE: do not set CR0_TS here. npxinit() must do it after clearing
1266 * gd_npxthread. Otherwise a preemptive interrupt thread
1267 * may panic in npxdna().
1270 load_cr0(rcr0() | CR0_MP);
1273 * NOTE: The MSR values must be correct so we can return to
1274 * userland. gd_user_fs/gs must be correct so the switch
1275 * code knows what the current MSR values are.
1277 pcb->pcb_fsbase = 0; /* Values loaded from PCB on switch */
1278 pcb->pcb_gsbase = 0;
1279 mdcpu->gd_user_fs = 0; /* Cache of current MSR values */
1280 mdcpu->gd_user_gs = 0;
1281 wrmsr(MSR_FSBASE, 0); /* Set MSR values for return to userland */
1282 wrmsr(MSR_KGSBASE, 0);
1284 /* Initialize the npx (if any) for the current process. */
1288 pcb->pcb_ds = _udatasel;
1289 pcb->pcb_es = _udatasel;
1290 pcb->pcb_fs = _udatasel;
1291 pcb->pcb_gs = _udatasel;
1300 cr0 |= CR0_NE; /* Done by npxinit() */
1301 cr0 |= CR0_MP | CR0_TS; /* Done at every execve() too. */
1302 cr0 |= CR0_WP | CR0_AM;
1308 sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS)
1311 error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2,
1313 if (!error && req->newptr)
1318 SYSCTL_PROC(_machdep, CPU_ADJKERNTZ, adjkerntz, CTLTYPE_INT|CTLFLAG_RW,
1319 &adjkerntz, 0, sysctl_machdep_adjkerntz, "I", "");
1321 SYSCTL_INT(_machdep, CPU_DISRTCSET, disable_rtc_set,
1322 CTLFLAG_RW, &disable_rtc_set, 0, "");
1325 SYSCTL_STRUCT(_machdep, CPU_BOOTINFO, bootinfo,
1326 CTLFLAG_RD, &bootinfo, bootinfo, "");
1329 SYSCTL_INT(_machdep, CPU_WALLCLOCK, wall_cmos_clock,
1330 CTLFLAG_RW, &wall_cmos_clock, 0, "");
1332 extern u_long bootdev; /* not a cdev_t - encoding is different */
1333 SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev,
1334 CTLFLAG_RD, &bootdev, 0, "Boot device (not in cdev_t format)");
1337 * Initialize 386 and configure to run kernel
1341 * Initialize segments & interrupt table
1345 struct user_segment_descriptor gdt[NGDT * MAXCPU]; /* global descriptor table */
1346 struct gate_descriptor idt_arr[MAXCPU][NIDT];
1348 union descriptor ldt[NLDT]; /* local descriptor table */
1351 /* table descriptors - used to load tables by cpu */
1352 struct region_descriptor r_gdt;
1353 struct region_descriptor r_idt_arr[MAXCPU];
1355 /* JG proc0paddr is a virtual address */
1358 char proc0paddr_buff[LWKT_THREAD_STACK];
1361 /* software prototypes -- in more palatable form */
1362 struct soft_segment_descriptor gdt_segs[] = {
1363 /* GNULL_SEL 0 Null Descriptor */
1364 { 0x0, /* segment base address */
1366 0, /* segment type */
1367 0, /* segment descriptor priority level */
1368 0, /* segment descriptor present */
1370 0, /* default 32 vs 16 bit size */
1371 0 /* limit granularity (byte/page units)*/ },
1372 /* GCODE_SEL 1 Code Descriptor for kernel */
1373 { 0x0, /* segment base address */
1374 0xfffff, /* length - all address space */
1375 SDT_MEMERA, /* segment type */
1376 SEL_KPL, /* segment descriptor priority level */
1377 1, /* segment descriptor present */
1379 0, /* default 32 vs 16 bit size */
1380 1 /* limit granularity (byte/page units)*/ },
1381 /* GDATA_SEL 2 Data Descriptor for kernel */
1382 { 0x0, /* segment base address */
1383 0xfffff, /* length - all address space */
1384 SDT_MEMRWA, /* segment type */
1385 SEL_KPL, /* segment descriptor priority level */
1386 1, /* segment descriptor present */
1388 0, /* default 32 vs 16 bit size */
1389 1 /* limit granularity (byte/page units)*/ },
1390 /* GUCODE32_SEL 3 32 bit Code Descriptor for user */
1391 { 0x0, /* segment base address */
1392 0xfffff, /* length - all address space */
1393 SDT_MEMERA, /* segment type */
1394 SEL_UPL, /* segment descriptor priority level */
1395 1, /* segment descriptor present */
1397 1, /* default 32 vs 16 bit size */
1398 1 /* limit granularity (byte/page units)*/ },
1399 /* GUDATA_SEL 4 32/64 bit Data Descriptor for user */
1400 { 0x0, /* segment base address */
1401 0xfffff, /* length - all address space */
1402 SDT_MEMRWA, /* segment type */
1403 SEL_UPL, /* segment descriptor priority level */
1404 1, /* segment descriptor present */
1406 1, /* default 32 vs 16 bit size */
1407 1 /* limit granularity (byte/page units)*/ },
1408 /* GUCODE_SEL 5 64 bit Code Descriptor for user */
1409 { 0x0, /* segment base address */
1410 0xfffff, /* length - all address space */
1411 SDT_MEMERA, /* segment type */
1412 SEL_UPL, /* segment descriptor priority level */
1413 1, /* segment descriptor present */
1415 0, /* default 32 vs 16 bit size */
1416 1 /* limit granularity (byte/page units)*/ },
1417 /* GPROC0_SEL 6 Proc 0 Tss Descriptor */
1419 0x0, /* segment base address */
1420 sizeof(struct x86_64tss)-1,/* length - all address space */
1421 SDT_SYSTSS, /* segment type */
1422 SEL_KPL, /* segment descriptor priority level */
1423 1, /* segment descriptor present */
1425 0, /* unused - default 32 vs 16 bit size */
1426 0 /* limit granularity (byte/page units)*/ },
1427 /* Actually, the TSS is a system descriptor which is double size */
1428 { 0x0, /* segment base address */
1430 0, /* segment type */
1431 0, /* segment descriptor priority level */
1432 0, /* segment descriptor present */
1434 0, /* default 32 vs 16 bit size */
1435 0 /* limit granularity (byte/page units)*/ },
1436 /* GUGS32_SEL 8 32 bit GS Descriptor for user */
1437 { 0x0, /* segment base address */
1438 0xfffff, /* length - all address space */
1439 SDT_MEMRWA, /* segment type */
1440 SEL_UPL, /* segment descriptor priority level */
1441 1, /* segment descriptor present */
1443 1, /* default 32 vs 16 bit size */
1444 1 /* limit granularity (byte/page units)*/ },
1448 setidt_global(int idx, inthand_t *func, int typ, int dpl, int ist)
1452 for (cpu = 0; cpu < MAXCPU; ++cpu) {
1453 struct gate_descriptor *ip = &idt_arr[cpu][idx];
1455 ip->gd_looffset = (uintptr_t)func;
1456 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL);
1462 ip->gd_hioffset = ((uintptr_t)func)>>16 ;
1467 setidt(int idx, inthand_t *func, int typ, int dpl, int ist, int cpu)
1469 struct gate_descriptor *ip;
1471 KASSERT(cpu >= 0 && cpu < ncpus, ("invalid cpu %d", cpu));
1473 ip = &idt_arr[cpu][idx];
1474 ip->gd_looffset = (uintptr_t)func;
1475 ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL);
1481 ip->gd_hioffset = ((uintptr_t)func)>>16 ;
1484 #define IDTVEC(name) __CONCAT(X,name)
1487 IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl),
1488 IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm),
1489 IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot),
1490 IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align),
1491 IDTVEC(xmm), IDTVEC(dblfault),
1492 IDTVEC(fast_syscall), IDTVEC(fast_syscall32);
1494 #ifdef DEBUG_INTERRUPTS
1495 extern inthand_t *Xrsvdary[256];
1499 sdtossd(struct user_segment_descriptor *sd, struct soft_segment_descriptor *ssd)
1501 ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase;
1502 ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit;
1503 ssd->ssd_type = sd->sd_type;
1504 ssd->ssd_dpl = sd->sd_dpl;
1505 ssd->ssd_p = sd->sd_p;
1506 ssd->ssd_def32 = sd->sd_def32;
1507 ssd->ssd_gran = sd->sd_gran;
1511 ssdtosd(struct soft_segment_descriptor *ssd, struct user_segment_descriptor *sd)
1514 sd->sd_lobase = (ssd->ssd_base) & 0xffffff;
1515 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff;
1516 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff;
1517 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf;
1518 sd->sd_type = ssd->ssd_type;
1519 sd->sd_dpl = ssd->ssd_dpl;
1520 sd->sd_p = ssd->ssd_p;
1521 sd->sd_long = ssd->ssd_long;
1522 sd->sd_def32 = ssd->ssd_def32;
1523 sd->sd_gran = ssd->ssd_gran;
1527 ssdtosyssd(struct soft_segment_descriptor *ssd,
1528 struct system_segment_descriptor *sd)
1531 sd->sd_lobase = (ssd->ssd_base) & 0xffffff;
1532 sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful;
1533 sd->sd_lolimit = (ssd->ssd_limit) & 0xffff;
1534 sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf;
1535 sd->sd_type = ssd->ssd_type;
1536 sd->sd_dpl = ssd->ssd_dpl;
1537 sd->sd_p = ssd->ssd_p;
1538 sd->sd_gran = ssd->ssd_gran;
1542 * Populate the (physmap) array with base/bound pairs describing the
1543 * available physical memory in the system, then test this memory and
1544 * build the phys_avail array describing the actually-available memory.
1546 * If we cannot accurately determine the physical memory map, then use
1547 * value from the 0xE801 call, and failing that, the RTC.
1549 * Total memory size may be set by the kernel environment variable
1550 * hw.physmem or the compile-time define MAXMEM.
1552 * Memory is aligned to PHYSMAP_ALIGN which must be a multiple
1553 * of PAGE_SIZE. This also greatly reduces the memory test time
1554 * which would otherwise be excessive on machines with > 8G of ram.
1556 * XXX first should be vm_paddr_t.
1559 #define PHYSMAP_ALIGN (vm_paddr_t)(128 * 1024)
1560 #define PHYSMAP_ALIGN_MASK (vm_paddr_t)(PHYSMAP_ALIGN - 1)
1561 vm_paddr_t physmap[PHYSMAP_SIZE];
1562 struct bios_smap *smapbase, *smap, *smapend;
1566 getmemsize(caddr_t kmdp, u_int64_t first)
1568 int off, physmap_idx, pa_indx, da_indx;
1571 vm_paddr_t msgbuf_size;
1572 u_long physmem_tunable;
1574 quad_t dcons_addr, dcons_size;
1576 bzero(physmap, sizeof(physmap));
1580 * get memory map from INT 15:E820, kindly supplied by the loader.
1582 * subr_module.c says:
1583 * "Consumer may safely assume that size value precedes data."
1584 * ie: an int32_t immediately precedes smap.
1586 smapbase = (struct bios_smap *)preload_search_info(kmdp,
1587 MODINFO_METADATA | MODINFOMD_SMAP);
1588 if (smapbase == NULL)
1589 panic("No BIOS smap info from loader!");
1591 smapsize = *((u_int32_t *)smapbase - 1);
1592 smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize);
1594 for (smap = smapbase; smap < smapend; smap++) {
1595 if (boothowto & RB_VERBOSE)
1596 kprintf("SMAP type=%02x base=%016lx len=%016lx\n",
1597 smap->type, smap->base, smap->length);
1599 if (smap->type != SMAP_TYPE_MEMORY)
1602 if (smap->length == 0)
1605 for (i = 0; i <= physmap_idx; i += 2) {
1606 if (smap->base < physmap[i + 1]) {
1607 if (boothowto & RB_VERBOSE) {
1608 kprintf("Overlapping or non-monotonic "
1609 "memory region, ignoring "
1615 if (i <= physmap_idx)
1618 Realmem += smap->length;
1620 if (smap->base == physmap[physmap_idx + 1]) {
1621 physmap[physmap_idx + 1] += smap->length;
1626 if (physmap_idx == PHYSMAP_SIZE) {
1627 kprintf("Too many segments in the physical "
1628 "address map, giving up\n");
1631 physmap[physmap_idx] = smap->base;
1632 physmap[physmap_idx + 1] = smap->base + smap->length;
1635 base_memory = physmap[1] / 1024;
1636 /* make hole for AP bootstrap code */
1637 physmap[1] = mp_bootaddress(base_memory);
1639 /* Save EBDA address, if any */
1640 ebda_addr = (u_long)(*(u_short *)(KERNBASE + 0x40e));
1644 * Maxmem isn't the "maximum memory", it's one larger than the
1645 * highest page of the physical address space. It should be
1646 * called something like "Maxphyspage". We may adjust this
1647 * based on ``hw.physmem'' and the results of the memory test.
1649 Maxmem = atop(physmap[physmap_idx + 1]);
1652 Maxmem = MAXMEM / 4;
1655 if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable))
1656 Maxmem = atop(physmem_tunable);
1659 * Don't allow MAXMEM or hw.physmem to extend the amount of memory
1662 if (Maxmem > atop(physmap[physmap_idx + 1]))
1663 Maxmem = atop(physmap[physmap_idx + 1]);
1666 * Blowing out the DMAP will blow up the system.
1668 if (Maxmem > atop(DMAP_MAX_ADDRESS - DMAP_MIN_ADDRESS)) {
1669 kprintf("Limiting Maxmem due to DMAP size\n");
1670 Maxmem = atop(DMAP_MAX_ADDRESS - DMAP_MIN_ADDRESS);
1673 if (atop(physmap[physmap_idx + 1]) != Maxmem &&
1674 (boothowto & RB_VERBOSE)) {
1675 kprintf("Physical memory use set to %ldK\n", Maxmem * 4);
1679 * Call pmap initialization to make new kernel address space
1683 pmap_bootstrap(&first);
1684 physmap[0] = PAGE_SIZE;
1687 * Align the physmap to PHYSMAP_ALIGN and cut out anything
1690 for (i = j = 0; i <= physmap_idx; i += 2) {
1691 if (physmap[i+1] > ptoa(Maxmem))
1692 physmap[i+1] = ptoa(Maxmem);
1693 physmap[i] = (physmap[i] + PHYSMAP_ALIGN_MASK) &
1694 ~PHYSMAP_ALIGN_MASK;
1695 physmap[i+1] = physmap[i+1] & ~PHYSMAP_ALIGN_MASK;
1697 physmap[j] = physmap[i];
1698 physmap[j+1] = physmap[i+1];
1700 if (physmap[i] < physmap[i+1])
1703 physmap_idx = j - 2;
1706 * Align anything else used in the validation loop.
1708 first = (first + PHYSMAP_ALIGN_MASK) & ~PHYSMAP_ALIGN_MASK;
1711 * Size up each available chunk of physical memory.
1715 phys_avail[pa_indx++] = physmap[0];
1716 phys_avail[pa_indx] = physmap[0];
1717 dump_avail[da_indx] = physmap[0];
1721 * Get dcons buffer address
1723 if (kgetenv_quad("dcons.addr", &dcons_addr) == 0 ||
1724 kgetenv_quad("dcons.size", &dcons_size) == 0)
1728 * Validate the physical memory. The physical memory segments
1729 * have already been aligned to PHYSMAP_ALIGN which is a multiple
1732 for (i = 0; i <= physmap_idx; i += 2) {
1735 end = physmap[i + 1];
1737 for (pa = physmap[i]; pa < end; pa += PHYSMAP_ALIGN) {
1738 int tmp, page_bad, full;
1739 int *ptr = (int *)CADDR1;
1743 * block out kernel memory as not available.
1745 if (pa >= 0x200000 && pa < first)
1749 * block out dcons buffer
1752 && pa >= trunc_page(dcons_addr)
1753 && pa < dcons_addr + dcons_size) {
1760 * map page into kernel: valid, read/write,non-cacheable
1763 kernel_pmap.pmap_bits[PG_V_IDX] |
1764 kernel_pmap.pmap_bits[PG_RW_IDX] |
1765 kernel_pmap.pmap_bits[PG_N_IDX];
1770 * Test for alternating 1's and 0's
1772 *(volatile int *)ptr = 0xaaaaaaaa;
1774 if (*(volatile int *)ptr != 0xaaaaaaaa)
1777 * Test for alternating 0's and 1's
1779 *(volatile int *)ptr = 0x55555555;
1781 if (*(volatile int *)ptr != 0x55555555)
1786 *(volatile int *)ptr = 0xffffffff;
1788 if (*(volatile int *)ptr != 0xffffffff)
1793 *(volatile int *)ptr = 0x0;
1795 if (*(volatile int *)ptr != 0x0)
1798 * Restore original value.
1803 * Adjust array of valid/good pages.
1805 if (page_bad == TRUE)
1808 * If this good page is a continuation of the
1809 * previous set of good pages, then just increase
1810 * the end pointer. Otherwise start a new chunk.
1811 * Note that "end" points one higher than end,
1812 * making the range >= start and < end.
1813 * If we're also doing a speculative memory
1814 * test and we at or past the end, bump up Maxmem
1815 * so that we keep going. The first bad page
1816 * will terminate the loop.
1818 if (phys_avail[pa_indx] == pa) {
1819 phys_avail[pa_indx] += PHYSMAP_ALIGN;
1822 if (pa_indx == PHYS_AVAIL_ARRAY_END) {
1824 "Too many holes in the physical address space, giving up\n");
1829 phys_avail[pa_indx++] = pa;
1830 phys_avail[pa_indx] = pa + PHYSMAP_ALIGN;
1832 physmem += PHYSMAP_ALIGN / PAGE_SIZE;
1834 if (dump_avail[da_indx] == pa) {
1835 dump_avail[da_indx] += PHYSMAP_ALIGN;
1838 if (da_indx == DUMP_AVAIL_ARRAY_END) {
1842 dump_avail[da_indx++] = pa;
1843 dump_avail[da_indx] = pa + PHYSMAP_ALIGN;
1854 * The last chunk must contain at least one page plus the message
1855 * buffer to avoid complicating other code (message buffer address
1856 * calculation, etc.).
1858 msgbuf_size = (MSGBUF_SIZE + PHYSMAP_ALIGN_MASK) & ~PHYSMAP_ALIGN_MASK;
1860 while (phys_avail[pa_indx - 1] + PHYSMAP_ALIGN +
1861 msgbuf_size >= phys_avail[pa_indx]) {
1862 physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]);
1863 phys_avail[pa_indx--] = 0;
1864 phys_avail[pa_indx--] = 0;
1867 Maxmem = atop(phys_avail[pa_indx]);
1869 /* Trim off space for the message buffer. */
1870 phys_avail[pa_indx] -= msgbuf_size;
1872 avail_end = phys_avail[pa_indx];
1874 /* Map the message buffer. */
1875 for (off = 0; off < msgbuf_size; off += PAGE_SIZE) {
1876 pmap_kenter((vm_offset_t)msgbufp + off,
1877 phys_avail[pa_indx] + off);
1881 struct machintr_abi MachIntrABI;
1892 * 7 Device Not Available (x87)
1894 * 9 Coprocessor Segment overrun (unsupported, reserved)
1896 * 11 Segment not present
1898 * 13 General Protection
1901 * 16 x87 FP Exception pending
1902 * 17 Alignment Check
1904 * 19 SIMD floating point
1906 * 32-255 INTn/external sources
1909 hammer_time(u_int64_t modulep, u_int64_t physfree)
1912 int gsel_tss, x, cpu;
1914 int metadata_missing, off;
1916 struct mdglobaldata *gd;
1920 * Prevent lowering of the ipl if we call tsleep() early.
1922 gd = &CPU_prvspace[0]->mdglobaldata;
1923 bzero(gd, sizeof(*gd));
1926 * Note: on both UP and SMP curthread must be set non-NULL
1927 * early in the boot sequence because the system assumes
1928 * that 'curthread' is never NULL.
1931 gd->mi.gd_curthread = &thread0;
1932 thread0.td_gd = &gd->mi;
1934 atdevbase = ISA_HOLE_START + PTOV_OFFSET;
1937 metadata_missing = 0;
1938 if (bootinfo.bi_modulep) {
1939 preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE;
1940 preload_bootstrap_relocate(KERNBASE);
1942 metadata_missing = 1;
1944 if (bootinfo.bi_envp)
1945 kern_envp = (caddr_t)bootinfo.bi_envp + KERNBASE;
1948 preload_metadata = (caddr_t)(uintptr_t)(modulep + PTOV_OFFSET);
1949 preload_bootstrap_relocate(PTOV_OFFSET);
1950 kmdp = preload_search_by_type("elf kernel");
1952 kmdp = preload_search_by_type("elf64 kernel");
1953 boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int);
1954 kern_envp = MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + PTOV_OFFSET;
1956 ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t);
1957 ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t);
1960 if (boothowto & RB_VERBOSE)
1964 * Default MachIntrABI to ICU
1966 MachIntrABI = MachIntrABI_ICU;
1969 * start with one cpu. Note: with one cpu, ncpus2_shift, ncpus2_mask,
1970 * and ncpus_fit_mask remain 0.
1975 /* Init basic tunables, hz etc */
1979 * make gdt memory segments
1981 gdt_segs[GPROC0_SEL].ssd_base =
1982 (uintptr_t) &CPU_prvspace[0]->mdglobaldata.gd_common_tss;
1984 gd->mi.gd_prvspace = CPU_prvspace[0];
1986 for (x = 0; x < NGDT; x++) {
1987 if (x != GPROC0_SEL && x != (GPROC0_SEL + 1))
1988 ssdtosd(&gdt_segs[x], &gdt[x]);
1990 ssdtosyssd(&gdt_segs[GPROC0_SEL],
1991 (struct system_segment_descriptor *)&gdt[GPROC0_SEL]);
1993 r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
1994 r_gdt.rd_base = (long) gdt;
1997 wrmsr(MSR_FSBASE, 0); /* User value */
1998 wrmsr(MSR_GSBASE, (u_int64_t)&gd->mi);
1999 wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */
2001 mi_gdinit(&gd->mi, 0);
2003 proc0paddr = proc0paddr_buff;
2004 mi_proc0init(&gd->mi, proc0paddr);
2005 safepri = TDPRI_MAX;
2007 /* spinlocks and the BGL */
2011 for (x = 0; x < NIDT; x++)
2012 setidt_global(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0);
2013 setidt_global(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0);
2014 setidt_global(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0);
2015 setidt_global(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 1);
2016 setidt_global(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0);
2017 setidt_global(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0);
2018 setidt_global(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0);
2019 setidt_global(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0);
2020 setidt_global(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0);
2021 setidt_global(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1);
2022 setidt_global(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0);
2023 setidt_global(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0);
2024 setidt_global(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0);
2025 setidt_global(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0);
2026 setidt_global(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0);
2027 setidt_global(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0);
2028 setidt_global(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0);
2029 setidt_global(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0);
2030 setidt_global(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0);
2031 setidt_global(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0);
2033 for (cpu = 0; cpu < MAXCPU; ++cpu) {
2034 r_idt_arr[cpu].rd_limit = sizeof(idt_arr[cpu]) - 1;
2035 r_idt_arr[cpu].rd_base = (long) &idt_arr[cpu][0];
2038 lidt(&r_idt_arr[0]);
2041 * Initialize the console before we print anything out.
2046 if (metadata_missing)
2047 kprintf("WARNING: loader(8) metadata is missing!\n");
2057 * Initialize IRQ mapping
2060 * SHOULD be after elcr_probe()
2062 MachIntrABI_ICU.initmap();
2063 MachIntrABI_IOAPIC.initmap();
2067 if (boothowto & RB_KDB)
2068 Debugger("Boot flags requested debugger");
2072 finishidentcpu(); /* Final stage of CPU initialization */
2073 setidt(6, &IDTVEC(ill), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
2074 setidt(13, &IDTVEC(prot), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
2076 identify_cpu(); /* Final stage of CPU initialization */
2077 initializecpu(0); /* Initialize CPU registers */
2079 TUNABLE_INT_FETCH("hw.apic_io_enable", &ioapic_enable); /* for compat */
2080 TUNABLE_INT_FETCH("hw.ioapic_enable", &ioapic_enable);
2081 TUNABLE_INT_FETCH("hw.lapic_enable", &lapic_enable);
2082 TUNABLE_INT_FETCH("machdep.cpu_idle_hlt", &cpu_idle_hlt);
2085 * Some of the virtual machines do not work w/ I/O APIC
2086 * enabled. If the user does not explicitly enable or
2087 * disable the I/O APIC (ioapic_enable < 0), then we
2088 * disable I/O APIC on all virtual machines.
2091 * This must be done after identify_cpu(), which sets
2094 if (ioapic_enable < 0) {
2095 if (cpu_feature2 & CPUID2_VMM)
2101 /* make an initial tss so cpu can get interrupt stack on syscall! */
2102 gd->gd_common_tss.tss_rsp0 =
2103 (register_t)(thread0.td_kstack +
2104 KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb));
2105 /* Ensure the stack is aligned to 16 bytes */
2106 gd->gd_common_tss.tss_rsp0 &= ~(register_t)0xF;
2108 /* double fault stack */
2109 gd->gd_common_tss.tss_ist1 =
2110 (long)&gd->mi.gd_prvspace->idlestack[
2111 sizeof(gd->mi.gd_prvspace->idlestack)];
2113 /* Set the IO permission bitmap (empty due to tss seg limit) */
2114 gd->gd_common_tss.tss_iobase = sizeof(struct x86_64tss);
2116 gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
2117 gd->gd_tss_gdt = &gdt[GPROC0_SEL];
2118 gd->gd_common_tssd = *gd->gd_tss_gdt;
2121 /* Set up the fast syscall stuff */
2122 msr = rdmsr(MSR_EFER) | EFER_SCE;
2123 wrmsr(MSR_EFER, msr);
2124 wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall));
2125 wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32));
2126 msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) |
2127 ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48);
2128 wrmsr(MSR_STAR, msr);
2129 wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D|PSL_IOPL);
2131 getmemsize(kmdp, physfree);
2132 init_param2(physmem);
2134 /* now running on new page tables, configured,and u/iom is accessible */
2136 /* Map the message buffer. */
2138 for (off = 0; off < round_page(MSGBUF_SIZE); off += PAGE_SIZE)
2139 pmap_kenter((vm_offset_t)msgbufp + off, avail_end + off);
2142 msgbufinit(msgbufp, MSGBUF_SIZE);
2145 /* transfer to user mode */
2147 _ucodesel = GSEL(GUCODE_SEL, SEL_UPL);
2148 _udatasel = GSEL(GUDATA_SEL, SEL_UPL);
2149 _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL);
2155 /* setup proc 0's pcb */
2156 thread0.td_pcb->pcb_flags = 0;
2157 thread0.td_pcb->pcb_cr3 = KPML4phys;
2158 thread0.td_pcb->pcb_ext = NULL;
2159 lwp0.lwp_md.md_regs = &proc0_tf; /* XXX needed? */
2161 /* Location of kernel stack for locore */
2162 return ((u_int64_t)thread0.td_pcb);
2166 * Initialize machine-dependant portions of the global data structure.
2167 * Note that the global data area and cpu0's idlestack in the private
2168 * data space were allocated in locore.
2170 * Note: the idlethread's cpl is 0
2172 * WARNING! Called from early boot, 'mycpu' may not work yet.
2175 cpu_gdinit(struct mdglobaldata *gd, int cpu)
2178 gd->mi.gd_curthread = &gd->mi.gd_idlethread;
2180 lwkt_init_thread(&gd->mi.gd_idlethread,
2181 gd->mi.gd_prvspace->idlestack,
2182 sizeof(gd->mi.gd_prvspace->idlestack),
2184 lwkt_set_comm(&gd->mi.gd_idlethread, "idle_%d", cpu);
2185 gd->mi.gd_idlethread.td_switch = cpu_lwkt_switch;
2186 gd->mi.gd_idlethread.td_sp -= sizeof(void *);
2187 *(void **)gd->mi.gd_idlethread.td_sp = cpu_idle_restore;
2191 * We only have to check for DMAP bounds, the globaldata space is
2192 * actually part of the kernel_map so we don't have to waste time
2193 * checking CPU_prvspace[*].
2196 is_globaldata_space(vm_offset_t saddr, vm_offset_t eaddr)
2199 if (saddr >= (vm_offset_t)&CPU_prvspace[0] &&
2200 eaddr <= (vm_offset_t)&CPU_prvspace[MAXCPU]) {
2204 if (saddr >= DMAP_MIN_ADDRESS && eaddr <= DMAP_MAX_ADDRESS)
2210 globaldata_find(int cpu)
2212 KKASSERT(cpu >= 0 && cpu < ncpus);
2213 return(&CPU_prvspace[cpu]->mdglobaldata.mi);
2217 * This path should be safe from the SYSRET issue because only stopped threads
2218 * can have their %rip adjusted this way (and all heavy weight thread switches
2219 * clear QUICKREF and thus do not use SYSRET). However, the code path is
2220 * convoluted so add a safety by forcing %rip to be cannonical.
2223 ptrace_set_pc(struct lwp *lp, unsigned long addr)
2225 if (addr & 0x0000800000000000LLU)
2226 lp->lwp_md.md_regs->tf_rip = addr | 0xFFFF000000000000LLU;
2228 lp->lwp_md.md_regs->tf_rip = addr & 0x0000FFFFFFFFFFFFLLU;
2233 ptrace_single_step(struct lwp *lp)
2235 lp->lwp_md.md_regs->tf_rflags |= PSL_T;
2240 fill_regs(struct lwp *lp, struct reg *regs)
2242 struct trapframe *tp;
2244 if ((tp = lp->lwp_md.md_regs) == NULL)
2246 bcopy(&tp->tf_rdi, ®s->r_rdi, sizeof(*regs));
2251 set_regs(struct lwp *lp, struct reg *regs)
2253 struct trapframe *tp;
2255 tp = lp->lwp_md.md_regs;
2256 if (!EFL_SECURE(regs->r_rflags, tp->tf_rflags) ||
2257 !CS_SECURE(regs->r_cs))
2259 bcopy(®s->r_rdi, &tp->tf_rdi, sizeof(*regs));
2265 fill_fpregs_xmm(struct savexmm *sv_xmm, struct save87 *sv_87)
2267 struct env87 *penv_87 = &sv_87->sv_env;
2268 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2271 /* FPU control/status */
2272 penv_87->en_cw = penv_xmm->en_cw;
2273 penv_87->en_sw = penv_xmm->en_sw;
2274 penv_87->en_tw = penv_xmm->en_tw;
2275 penv_87->en_fip = penv_xmm->en_fip;
2276 penv_87->en_fcs = penv_xmm->en_fcs;
2277 penv_87->en_opcode = penv_xmm->en_opcode;
2278 penv_87->en_foo = penv_xmm->en_foo;
2279 penv_87->en_fos = penv_xmm->en_fos;
2282 for (i = 0; i < 8; ++i)
2283 sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc;
2287 set_fpregs_xmm(struct save87 *sv_87, struct savexmm *sv_xmm)
2289 struct env87 *penv_87 = &sv_87->sv_env;
2290 struct envxmm *penv_xmm = &sv_xmm->sv_env;
2293 /* FPU control/status */
2294 penv_xmm->en_cw = penv_87->en_cw;
2295 penv_xmm->en_sw = penv_87->en_sw;
2296 penv_xmm->en_tw = penv_87->en_tw;
2297 penv_xmm->en_fip = penv_87->en_fip;
2298 penv_xmm->en_fcs = penv_87->en_fcs;
2299 penv_xmm->en_opcode = penv_87->en_opcode;
2300 penv_xmm->en_foo = penv_87->en_foo;
2301 penv_xmm->en_fos = penv_87->en_fos;
2304 for (i = 0; i < 8; ++i)
2305 sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i];
2309 fill_fpregs(struct lwp *lp, struct fpreg *fpregs)
2311 if (lp->lwp_thread == NULL || lp->lwp_thread->td_pcb == NULL)
2314 fill_fpregs_xmm(&lp->lwp_thread->td_pcb->pcb_save.sv_xmm,
2315 (struct save87 *)fpregs);
2318 bcopy(&lp->lwp_thread->td_pcb->pcb_save.sv_87, fpregs, sizeof *fpregs);
2323 set_fpregs(struct lwp *lp, struct fpreg *fpregs)
2326 set_fpregs_xmm((struct save87 *)fpregs,
2327 &lp->lwp_thread->td_pcb->pcb_save.sv_xmm);
2330 bcopy(fpregs, &lp->lwp_thread->td_pcb->pcb_save.sv_87, sizeof *fpregs);
2335 fill_dbregs(struct lwp *lp, struct dbreg *dbregs)
2340 dbregs->dr[0] = rdr0();
2341 dbregs->dr[1] = rdr1();
2342 dbregs->dr[2] = rdr2();
2343 dbregs->dr[3] = rdr3();
2344 dbregs->dr[4] = rdr4();
2345 dbregs->dr[5] = rdr5();
2346 dbregs->dr[6] = rdr6();
2347 dbregs->dr[7] = rdr7();
2350 if (lp->lwp_thread == NULL || (pcb = lp->lwp_thread->td_pcb) == NULL)
2352 dbregs->dr[0] = pcb->pcb_dr0;
2353 dbregs->dr[1] = pcb->pcb_dr1;
2354 dbregs->dr[2] = pcb->pcb_dr2;
2355 dbregs->dr[3] = pcb->pcb_dr3;
2358 dbregs->dr[6] = pcb->pcb_dr6;
2359 dbregs->dr[7] = pcb->pcb_dr7;
2364 set_dbregs(struct lwp *lp, struct dbreg *dbregs)
2367 load_dr0(dbregs->dr[0]);
2368 load_dr1(dbregs->dr[1]);
2369 load_dr2(dbregs->dr[2]);
2370 load_dr3(dbregs->dr[3]);
2371 load_dr4(dbregs->dr[4]);
2372 load_dr5(dbregs->dr[5]);
2373 load_dr6(dbregs->dr[6]);
2374 load_dr7(dbregs->dr[7]);
2377 struct ucred *ucred;
2379 uint64_t mask1, mask2;
2382 * Don't let an illegal value for dr7 get set. Specifically,
2383 * check for undefined settings. Setting these bit patterns
2384 * result in undefined behaviour and can lead to an unexpected
2387 /* JG this loop looks unreadable */
2388 /* Check 4 2-bit fields for invalid patterns.
2389 * These fields are R/Wi, for i = 0..3
2391 /* Is 10 in LENi allowed when running in compatibility mode? */
2392 /* Pattern 10 in R/Wi might be used to indicate
2393 * breakpoint on I/O. Further analysis should be
2394 * carried to decide if it is safe and useful to
2395 * provide access to that capability
2397 for (i = 0, mask1 = 0x3<<16, mask2 = 0x2<<16; i < 4;
2398 i++, mask1 <<= 4, mask2 <<= 4)
2399 if ((dbregs->dr[7] & mask1) == mask2)
2402 pcb = lp->lwp_thread->td_pcb;
2403 ucred = lp->lwp_proc->p_ucred;
2406 * Don't let a process set a breakpoint that is not within the
2407 * process's address space. If a process could do this, it
2408 * could halt the system by setting a breakpoint in the kernel
2409 * (if ddb was enabled). Thus, we need to check to make sure
2410 * that no breakpoints are being enabled for addresses outside
2411 * process's address space, unless, perhaps, we were called by
2414 * XXX - what about when the watched area of the user's
2415 * address space is written into from within the kernel
2416 * ... wouldn't that still cause a breakpoint to be generated
2417 * from within kernel mode?
2420 if (priv_check_cred(ucred, PRIV_ROOT, 0) != 0) {
2421 if (dbregs->dr[7] & 0x3) {
2422 /* dr0 is enabled */
2423 if (dbregs->dr[0] >= VM_MAX_USER_ADDRESS)
2427 if (dbregs->dr[7] & (0x3<<2)) {
2428 /* dr1 is enabled */
2429 if (dbregs->dr[1] >= VM_MAX_USER_ADDRESS)
2433 if (dbregs->dr[7] & (0x3<<4)) {
2434 /* dr2 is enabled */
2435 if (dbregs->dr[2] >= VM_MAX_USER_ADDRESS)
2439 if (dbregs->dr[7] & (0x3<<6)) {
2440 /* dr3 is enabled */
2441 if (dbregs->dr[3] >= VM_MAX_USER_ADDRESS)
2446 pcb->pcb_dr0 = dbregs->dr[0];
2447 pcb->pcb_dr1 = dbregs->dr[1];
2448 pcb->pcb_dr2 = dbregs->dr[2];
2449 pcb->pcb_dr3 = dbregs->dr[3];
2450 pcb->pcb_dr6 = dbregs->dr[6];
2451 pcb->pcb_dr7 = dbregs->dr[7];
2453 pcb->pcb_flags |= PCB_DBREGS;
2460 * Return > 0 if a hardware breakpoint has been hit, and the
2461 * breakpoint was in user space. Return 0, otherwise.
2464 user_dbreg_trap(void)
2466 u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */
2467 u_int64_t bp; /* breakpoint bits extracted from dr6 */
2468 int nbp; /* number of breakpoints that triggered */
2469 caddr_t addr[4]; /* breakpoint addresses */
2473 if ((dr7 & 0xff) == 0) {
2475 * all GE and LE bits in the dr7 register are zero,
2476 * thus the trap couldn't have been caused by the
2477 * hardware debug registers
2488 * None of the breakpoint bits are set meaning this
2489 * trap was not caused by any of the debug registers
2495 * at least one of the breakpoints were hit, check to see
2496 * which ones and if any of them are user space addresses
2500 addr[nbp++] = (caddr_t)rdr0();
2503 addr[nbp++] = (caddr_t)rdr1();
2506 addr[nbp++] = (caddr_t)rdr2();
2509 addr[nbp++] = (caddr_t)rdr3();
2512 for (i=0; i<nbp; i++) {
2514 (caddr_t)VM_MAX_USER_ADDRESS) {
2516 * addr[i] is in user space
2523 * None of the breakpoints are in user space.
2531 Debugger(const char *msg)
2533 kprintf("Debugger(\"%s\") called.\n", msg);
2540 * Provide inb() and outb() as functions. They are normally only
2541 * available as macros calling inlined functions, thus cannot be
2542 * called inside DDB.
2544 * The actual code is stolen from <machine/cpufunc.h>, and de-inlined.
2550 /* silence compiler warnings */
2552 void outb(u_int, u_char);
2559 * We use %%dx and not %1 here because i/o is done at %dx and not at
2560 * %edx, while gcc generates inferior code (movw instead of movl)
2561 * if we tell it to load (u_short) port.
2563 __asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port));
2568 outb(u_int port, u_char data)
2572 * Use an unnecessary assignment to help gcc's register allocator.
2573 * This make a large difference for gcc-1.40 and a tiny difference
2574 * for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for
2575 * best results. gcc-2.6.0 can't handle this.
2578 __asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port));
2586 * initialize all the SMP locks
2589 /* critical region when masking or unmasking interupts */
2590 struct spinlock_deprecated imen_spinlock;
2592 /* critical region for old style disable_intr/enable_intr */
2593 struct spinlock_deprecated mpintr_spinlock;
2595 /* critical region around INTR() routines */
2596 struct spinlock_deprecated intr_spinlock;
2598 /* lock region used by kernel profiling */
2599 struct spinlock_deprecated mcount_spinlock;
2601 /* locks com (tty) data/hardware accesses: a FASTINTR() */
2602 struct spinlock_deprecated com_spinlock;
2604 /* lock regions around the clock hardware */
2605 struct spinlock_deprecated clock_spinlock;
2611 * Get the initial mplock with a count of 1 for the BSP.
2612 * This uses a LOGICAL cpu ID, ie BSP == 0.
2614 cpu_get_initial_mplock();
2616 spin_lock_init(&mcount_spinlock);
2617 spin_lock_init(&intr_spinlock);
2618 spin_lock_init(&mpintr_spinlock);
2619 spin_lock_init(&imen_spinlock);
2620 spin_lock_init(&com_spinlock);
2621 spin_lock_init(&clock_spinlock);
2623 /* our token pool needs to work early */
2624 lwkt_token_pool_init();
2628 cpu_mwait_hint_valid(uint32_t hint)
2632 cx_idx = MWAIT_EAX_TO_CX(hint);
2633 if (cx_idx >= CPU_MWAIT_CX_MAX)
2636 sub = MWAIT_EAX_TO_CX_SUB(hint);
2637 if (sub >= cpu_mwait_cx_info[cx_idx].subcnt)
2644 cpu_mwait_cx_no_bmsts(void)
2646 atomic_clear_int(&cpu_mwait_c3_preamble, CPU_MWAIT_C3_PREAMBLE_BM_STS);
2650 cpu_mwait_cx_no_bmarb(void)
2652 atomic_clear_int(&cpu_mwait_c3_preamble, CPU_MWAIT_C3_PREAMBLE_BM_ARB);
2656 cpu_mwait_cx_select_sysctl(SYSCTL_HANDLER_ARGS, int *hint0,
2657 boolean_t allow_auto)
2659 int error, cx_idx, old_cx_idx, sub = 0, hint;
2660 char name[16], *ptr, *start;
2664 old_cx_idx = MWAIT_EAX_TO_CX(hint);
2665 sub = MWAIT_EAX_TO_CX_SUB(hint);
2666 } else if (hint == CPU_MWAIT_HINT_AUTO) {
2667 old_cx_idx = allow_auto ? CPU_MWAIT_C2 : CPU_MWAIT_CX_MAX;
2668 } else if (hint == CPU_MWAIT_HINT_AUTODEEP) {
2669 old_cx_idx = allow_auto ? CPU_MWAIT_C3 : CPU_MWAIT_CX_MAX;
2671 old_cx_idx = CPU_MWAIT_CX_MAX;
2674 if ((cpu_feature2 & CPUID2_MON) == 0 ||
2675 (cpu_mwait_feature & CPUID_MWAIT_EXT) == 0)
2676 strlcpy(name, "NONE", sizeof(name));
2677 else if (allow_auto && hint == CPU_MWAIT_HINT_AUTO)
2678 strlcpy(name, "AUTO", sizeof(name));
2679 else if (allow_auto && hint == CPU_MWAIT_HINT_AUTODEEP)
2680 strlcpy(name, "AUTODEEP", sizeof(name));
2681 else if (old_cx_idx >= CPU_MWAIT_CX_MAX ||
2682 sub >= cpu_mwait_cx_info[old_cx_idx].subcnt)
2683 strlcpy(name, "INVALID", sizeof(name));
2685 ksnprintf(name, sizeof(name), "C%d/%d", old_cx_idx, sub);
2687 error = sysctl_handle_string(oidp, name, sizeof(name), req);
2688 if (error != 0 || req->newptr == NULL)
2691 if ((cpu_feature2 & CPUID2_MON) == 0 ||
2692 (cpu_mwait_feature & CPUID_MWAIT_EXT) == 0)
2695 if (allow_auto && strcmp(name, "AUTO") == 0) {
2696 hint = CPU_MWAIT_HINT_AUTO;
2697 cx_idx = CPU_MWAIT_C2;
2700 if (allow_auto && strcmp(name, "AUTODEEP") == 0) {
2701 hint = CPU_MWAIT_HINT_AUTODEEP;
2702 cx_idx = CPU_MWAIT_C3;
2706 if (strlen(name) < 4 || toupper(name[0]) != 'C')
2711 cx_idx = strtol(start, &ptr, 10);
2712 if (ptr == start || *ptr != '/')
2714 if (cx_idx < 0 || cx_idx >= CPU_MWAIT_CX_MAX)
2720 sub = strtol(start, &ptr, 10);
2723 if (sub < 0 || sub >= cpu_mwait_cx_info[cx_idx].subcnt)
2726 hint = MWAIT_EAX_HINT(cx_idx, sub);
2728 if (cx_idx >= CPU_MWAIT_C3 && cpu_mwait_c3_preamble)
2730 if (old_cx_idx < CPU_MWAIT_C3 && cx_idx >= CPU_MWAIT_C3) {
2731 error = cputimer_intr_powersave_addreq();
2734 } else if (old_cx_idx >= CPU_MWAIT_C3 && cx_idx < CPU_MWAIT_C3) {
2735 cputimer_intr_powersave_remreq();
2743 cpu_mwait_cx_idle_sysctl(SYSCTL_HANDLER_ARGS)
2747 lwkt_serialize_enter(&cpu_mwait_cx_slize);
2748 error = cpu_mwait_cx_select_sysctl(oidp, arg1, arg2, req,
2749 &cpu_mwait_halt, TRUE);
2750 lwkt_serialize_exit(&cpu_mwait_cx_slize);
2755 cpu_mwait_cx_spin_sysctl(SYSCTL_HANDLER_ARGS)
2759 lwkt_serialize_enter(&cpu_mwait_cx_slize);
2760 error = cpu_mwait_cx_select_sysctl(oidp, arg1, arg2, req,
2761 &cpu_mwait_spin, FALSE);
2762 lwkt_serialize_exit(&cpu_mwait_cx_slize);