1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
3 # On the handling of kernel options
5 # All kernel options should be listed in LINT64, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT64 should compile as much code
8 # as possible. Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test. If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT64 to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options". Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files. Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
33 # Adaptec Array Controller driver options
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory
40 AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable
41 # targetmode operations.
43 AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our
46 AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code.
48 AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options.
49 # See sys/dev/aic7xxx/aic7xxx.h
51 AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug
52 # output. Adds ~15k to driver.
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code.
57 AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options.
58 # See sys/dev/aic7xxx/aic79xx.h
60 AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable
61 # targetmode operations.
63 AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug
64 # output. Adds ~15k to driver.
66 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
71 #options for ACPI support
73 ACPI_NO_SEMAPHORES opt_acpi.h
74 ACPI_ENABLE_PCI opt_acpi.h
76 # Miscellaneous options.
77 COMPAT_43 opt_compat.h
78 COMPILING_LINT opt_lint.h
81 DDB_UNATTENDED opt_ddb.h
82 GDB_REMOTE_CHAT opt_ddb.h
112 DIRECTIO opt_directio.h
114 # POSIX kernel options
115 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
117 # Do we want the config file compiled into the kernel?
118 INCLUDE_CONFIG_FILE opt_config.h
120 # Options for static file systems. These should only be used at config
121 # time, since the corresponding lkms cannot work if there are any static
122 # dependencies. Unusability is enforced by hiding the defines for the
123 # options in a never-included header.
128 MSDOSFS opt_dontuse.h
138 # These static filesystems has one slightly bogus static dependency in
139 # sys/platform/.../i386/autoconf.c. If any of these filesystems are
140 # statically compiled into the kernel, code for mounting them as root
141 # filesystems will be enabled - but look below. Boot-code is purposely
142 # unavailable for the LKM-based versions.
147 # filesystems and libiconv bridge
148 CD9660_ICONV opt_dontuse.h
149 MSDOSFS_ICONV opt_dontuse.h
150 NTFS_ICONV opt_dontuse.h
154 NETSMBCRYPTO opt_netsmb.h
156 # If you are following the conditions in the copyright,
157 # you can enable soft-updates which will speed up a lot of things
158 # and make the system safer from crashes at the same time.
159 # otherwise a STUB module will be compiled in.
160 SOFTUPDATES opt_ffs.h
162 # Enable fast hash lookups for large directories on UFS-based filesystems.
163 UFS_DIRHASH opt_ufs.h
165 # The above static dependencies are planned removed, with a
166 # <filesystem>_ROOT option to control if it usable as root. This list
167 # allows these options to be present in config files already (though
168 # they won't make any difference yet).
170 NFS_ROOT opt_nfsroot.h
172 # The union static file system has bogus static dependencies, so it isn't
176 # Options used only in subr_param.c.
180 NMBCLUSTERS opt_param.h
182 VM_BCACHE_SIZE_MAX opt_param.h
183 VM_SWZONE_SIZE_MAX opt_param.h
189 # Generic SCSI options.
190 CAM_MAX_HIGHPOWER opt_cam.h
192 CAM_DEBUG_DELAY opt_cam.h
193 CAM_DEBUG_BUS opt_cam.h
194 CAM_DEBUG_TARGET opt_cam.h
195 CAM_DEBUG_LUN opt_cam.h
196 CAM_DEBUG_FLAGS opt_cam.h
197 SCSI_DELAY opt_scsi.h
198 SCSI_NO_SENSE_STRINGS opt_scsi.h
199 SCSI_NO_OP_STRINGS opt_scsi.h
202 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
204 # Options used only in cam/scsi/scsi_cd.c
205 CHANGER_MIN_BUSY_SECONDS opt_cd.h
206 CHANGER_MAX_BUSY_SECONDS opt_cd.h
208 # Options used only in cam/scsi/scsi_sa.c.
209 SA_IO_TIMEOUT opt_sa.h
210 SA_SPACE_TIMEOUT opt_sa.h
211 SA_REWIND_TIMEOUT opt_sa.h
212 SA_ERASE_TIMEOUT opt_sa.h
213 SA_1FM_AT_EOD opt_sa.h
215 # Options used only in cam/scsi/scsi_pt.c
216 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
218 # Options used only in cam/scsi/scsi_ses.c
219 SES_ENABLE_PASSTHROUGH opt_ses.h
221 # Options used in dev/sym/ (Symbios SCSI driver).
222 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
223 # Allows the ncr to take precedence
224 # 1 (1<<0) -> 810a, 860
225 # 2 (1<<1) -> 825a, 875, 885, 895
226 # 4 (1<<2) -> 895a, 896, 1510d
227 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
228 # disabled:0 (default), enabled:1
229 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
230 # disabled:0, enabled:1 (default)
231 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
232 # default:8, range:[1..64]
234 # Options used only in pci/ncr.c
235 SCSI_NCR_DEBUG opt_ncr.h
236 SCSI_NCR_MAX_SYNC opt_ncr.h
237 SCSI_NCR_MAX_WIDE opt_ncr.h
238 SCSI_NCR_MYADDR opt_ncr.h
240 # Options used only in pci/isp_pci.c
241 ISP_TARGET_MODE opt_isp.h
243 # Options used in the 'nata' ATA/ATAPI driver
244 ATA_STATIC_ID opt_ata.h
254 ALTQ_FAIRQ opt_altq.h
255 ALTQ_NOPCC opt_altq.h
256 ALTQ_DEBUG opt_altq.h
261 BOOTP_COMPAT opt_bootp.h
262 BOOTP_NFSROOT opt_bootp.h
263 BOOTP_WIRED_TO opt_bootp.h
265 MROUTING opt_mrouting.h
270 IPSEC_ESP opt_ipsec.h
271 IPSEC_DEBUG opt_ipsec.h
272 IPSEC_FILTERGIF opt_ipsec.h
273 FAST_IPSEC opt_ipsec.h
276 DUMMYNET_DEBUG opt_ipdn.h
277 IPFIREWALL opt_ipfw.h
278 IPFIREWALL3 opt_ipfw.h
279 IPFIREWALL_DEBUG opt_ipfw.h
280 IPFIREWALL_VERBOSE opt_ipfw.h
281 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
282 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
283 IPV6FIREWALL opt_ip6fw.h
284 IPV6FIREWALL_VERBOSE opt_ip6fw.h
285 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
286 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
290 PPP_BSDCOMP opt_ppp.h
291 PPP_DEFLATE opt_ppp.h
293 SLIP_IFF_OPTS opt_slip.h
295 TCP_SIGNATURE opt_inet.h
296 TCP_DROP_SYNFIN opt_tcp_input.h
300 MBUF_STRESS_TEST opt_mbuf_stress_test.h
302 # (New netgraph, port still in progress)
304 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
305 # Each netgraph node type can be either be compiled into the kernel
306 # or loaded dynamically. To get the former, include the corresponding
307 # option below. Each type has its own man page, e.g. ng_async(4).
309 NETGRAPH7_DEBUG opt_netgraph.h
310 NETGRAPH7_ASYNC opt_netgraph.h
311 NETGRAPH7_ATMLLC opt_netgraph.h
312 NETGRAPH7_ATM_ATMPIF opt_netgraph.h
313 NETGRAPH7_BLUETOOTH opt_netgraph.h
314 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h
315 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h
316 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h
317 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h
318 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h
319 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h
320 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h
321 NETGRAPH7_BPF opt_netgraph.h
322 NETGRAPH7_BRIDGE opt_netgraph.h
323 NETGRAPH7_CAR opt_netgraph.h
324 NETGRAPH7_CISCO opt_netgraph.h
325 NETGRAPH7_DEFLATE opt_netgraph.h
326 NETGRAPH7_DEVICE opt_netgraph.h
327 NETGRAPH7_ECHO opt_netgraph.h
328 NETGRAPH7_EIFACE opt_netgraph.h
329 NETGRAPH7_ETF opt_netgraph.h
330 NETGRAPH7_ETHER opt_netgraph.h
331 NETGRAPH7_FEC opt_netgraph.h
332 NETGRAPH7_FRAME_RELAY opt_netgraph.h
333 NETGRAPH7_GIF opt_netgraph.h
334 NETGRAPH7_GIF_DEMUX opt_netgraph.h
335 NETGRAPH7_HOLE opt_netgraph.h
336 NETGRAPH7_HUB opt_netgraph.h
337 NETGRAPH7_IFACE opt_netgraph.h
338 NETGRAPH7_IP_INPUT opt_netgraph.h
339 NETGRAPH7_IPFW opt_netgraph.h
340 NETGRAPH7_KSOCKET opt_netgraph.h
341 NETGRAPH7_L2TP opt_netgraph.h
342 NETGRAPH7_LMI opt_netgraph.h
343 # MPPC compression requires proprietary files (not included)
344 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h
345 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h
346 NETGRAPH7_NAT opt_netgraph.h
347 NETGRAPH7_NETFLOW opt_netgraph.h
348 NETGRAPH7_ONE2MANY opt_netgraph.h
349 NETGRAPH7_PPP opt_netgraph.h
350 NETGRAPH7_PPPOE opt_netgraph.h
351 NETGRAPH7_PPTPGRE opt_netgraph.h
352 NETGRAPH7_PRED1 opt_netgraph.h
353 NETGRAPH7_RFC1490 opt_netgraph.h
354 NETGRAPH7_SOCKET opt_netgraph.h
355 NETGRAPH7_SPLIT opt_netgraph.h
356 NETGRAPH7_SPPP opt_netgraph.h
357 NETGRAPH7_TAG opt_netgraph.h
358 NETGRAPH7_TCPMSS opt_netgraph.h
359 NETGRAPH7_TEE opt_netgraph.h
360 NETGRAPH7_TTY opt_netgraph.h
361 NETGRAPH7_UI opt_netgraph.h
362 NETGRAPH7_VJC opt_netgraph.h
365 NGATM7_ATM opt_netgraph.h
366 NGATM7_ATMBASE opt_netgraph.h
367 NGATM7_SSCOP opt_netgraph.h
368 NGATM7_SSCFU opt_netgraph.h
369 NGATM7_UNI opt_netgraph.h
370 NGATM7_CCATM opt_netgraph.h
372 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
373 # Each netgraph node type can be either be compiled into the kernel
374 # or loaded dynamically. To get the former, include the corresponding
375 # option below. Each type has its own man page, e.g. ng_async(8).
377 NETGRAPH_ASYNC opt_netgraph.h
378 NETGRAPH_BPF opt_netgraph.h
379 NETGRAPH_BRIDGE opt_netgraph.h
380 NETGRAPH_CISCO opt_netgraph.h
381 NETGRAPH_ECHO opt_netgraph.h
382 NETGRAPH_EIFACE opt_netgraph.h
383 NETGRAPH_ETHER opt_netgraph.h
384 NETGRAPH_FEC opt_netgraph.h
385 NETGRAPH_FRAME_RELAY opt_netgraph.h
386 NETGRAPH_HOLE opt_netgraph.h
387 NETGRAPH_IFACE opt_netgraph.h
388 NETGRAPH_KSOCKET opt_netgraph.h
389 NETGRAPH_LMI opt_netgraph.h
390 NETGRAPH_L2TP opt_netgraph.h
391 # MPPC compression requires proprietary files (not included)
392 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
393 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
394 NETGRAPH_ONE2MANY opt_netgraph.h
395 NETGRAPH_PPP opt_netgraph.h
396 NETGRAPH_PPPOE opt_netgraph.h
397 NETGRAPH_PPTPGRE opt_netgraph.h
398 NETGRAPH_RFC1490 opt_netgraph.h
399 NETGRAPH_SOCKET opt_netgraph.h
400 NETGRAPH_TEE opt_netgraph.h
401 NETGRAPH_TTY opt_netgraph.h
402 NETGRAPH_UI opt_netgraph.h
403 NETGRAPH_VJC opt_netgraph.h
412 # DPT driver debug flags
413 DPT_MEASURE_PERFORMANCE opt_dpt.h
414 DPT_HANDLE_TIMEOUTS opt_dpt.h
415 DPT_TIMEOUT_FACTOR opt_dpt.h
416 DPT_LOST_IRQ opt_dpt.h
417 DPT_RESET_HBA opt_dpt.h
419 # Misc debug flags. Most of these should probably be replaced with
420 # 'DEBUG', and then let people recompile just the interesting modules
421 # with 'make CC="cc -DDEBUG"'.
422 CLUSTERDEBUG opt_debug_cluster.h
423 DEBUG_1284 opt_ppb_1284.h
426 PLIP_DEBUG opt_plip.h
427 LOCKF_DEBUG opt_debug_lockf.h
428 SI_DEBUG opt_debug_si.h
432 FB_INSTALL_CDEV opt_fb.h
434 # ppbus related options
435 PERIPH_1284 opt_ppb_1284.h
436 DONTPROBE_1284 opt_ppb_1284.h
438 # smbus related options
439 ENABLE_ALART opt_intpm.h
441 # These cause changes all over the kernel
442 NO_LWKT_SPLIT_USERPRI opt_global.h
443 BLKDEV_IOSIZE opt_global.h
445 DEBUG_LOCKS opt_global.h
446 DEBUG_LOCKS_LATENCY opt_global.h
447 DEBUG_CRIT_SECTIONS opt_global.h
448 DIAGNOSTIC opt_global.h
449 INVARIANTS opt_global.h
450 VFS_BIO_DEBUG opt_global.h
451 SOCKBUF_DEBUG opt_global.h
452 PANIC_DEBUG opt_global.h
453 MBUF_DEBUG opt_global.h
454 PMAP_DEBUG opt_global.h
455 VM_PAGE_DEBUG opt_global.h
456 SLAB_DEBUG opt_global.h
458 # Sample system/interrupt PC
459 DEBUG_PCTRACK opt_pctrack.h
461 # These are VM related options
467 # Size of the kernel message buffer
468 MSGBUF_SIZE opt_msgbuf.h
470 # PCI related options
474 NFS_MINATTRTIMO opt_nfs.h
475 NFS_MAXATTRTIMO opt_nfs.h
476 NFS_MINDIRATTRTIMO opt_nfs.h
477 NFS_MAXDIRATTRTIMO opt_nfs.h
478 NFS_GATHERDELAY opt_nfs.h
479 NFS_UIDHASHSIZ opt_nfs.h
480 NFS_WDELAYHASHSIZ opt_nfs.h
481 NFS_MUIDHASHSIZ opt_nfs.h
482 NFS_NOSERVER opt_nfs.h
486 MSDOSFS_DEBUG opt_msdosfs.h
488 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
489 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
490 BROOKTREE_ALLOC_PAGES opt_bktr.h
491 BKTR_OVERRIDE_CARD opt_bktr.h
492 BKTR_OVERRIDE_TUNER opt_bktr.h
493 BKTR_OVERRIDE_DBX opt_bktr.h
494 BKTR_OVERRIDE_MSP opt_bktr.h
495 BKTR_SYSTEM_DEFAULT opt_bktr.h
496 BKTR_ALLOC_PAGES opt_bktr.h
497 BKTR_USE_PLL opt_bktr.h
498 BKTR_GPIO_ACCESS opt_bktr.h
499 BKTR_NO_MSP_RESET opt_bktr.h
500 BKTR_430_FX_MODE opt_bktr.h
501 BKTR_SIS_VIA_MODE opt_bktr.h
502 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
504 # Various mi ISA bus flags
506 COM_MULTIPORT opt_sio.h
507 BREAK_TO_DEBUGGER opt_comconsole.h
508 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
510 # options for bus/device framework
513 # options for USB support
518 VINUMDEBUG opt_vinum.h
520 # Embedded system options
521 UKBD_DFLT_KEYMAP opt_ukbd.h
522 INIT_PATH opt_init_path.h
524 ROOTDEVNAME opt_rootdevname.h
527 PCFCLOCK_VERBOSE opt_pcfclock.h
528 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
530 # Network device queue based polling
531 IFPOLL_ENABLE opt_ifpoll.h
533 # options for ubsec driver
534 UBSEC_DEBUG opt_ubsec.h
535 UBSEC_RNDTEST opt_ubsec.h
536 UBSEC_NO_RNG opt_ubsec.h
538 # options for hifn driver
539 HIFN_DEBUG opt_hifn.h
540 HIFN_RNDTEST opt_hifn.h
541 HIFN_NO_RNG opt_hifn.h
543 # options for safenet driver
544 SAFE_DEBUG opt_safe.h
545 SAFE_NO_RNG opt_safe.h
546 SAFE_RNDTEST opt_safe.h
550 KTR_ENTRIES opt_global.h
552 KTR_ACPI_EC opt_ktr.h
554 KTR_DMCRYPT opt_ktr.h
555 KTR_DSCHED_BFQ opt_ktr.h
556 KTR_ETHERNET opt_ktr.h
562 KTR_IF_START opt_ktr.h
564 KTR_KERNENTRY opt_ktr.h
566 KTR_SERIALIZER opt_ktr.h
567 KTR_SPIN_CONTENTION opt_ktr.h
568 KTR_TESTLOG opt_ktr.h
571 KTR_USCHED_BSD4 opt_ktr.h
572 KTR_USCHED_DFLY opt_ktr.h
573 KTR_VERBOSE opt_ktr.h
574 KTR_IF_POLL opt_ktr.h
576 KTR_SOWAKEUP opt_ktr.h
579 NTFS_DEBUG opt_ntfs.h
581 # options for the Atheros driver
583 #ATH_DEBUG_ALQ opt_ath.h
584 ATH_DIAGAPI opt_ath.h
585 #ATH_EEPROM_FIRMWARE opt_ath.h
586 #ATH_ENABLE_11N opt_ath.h
587 ATH_ENABLE_DFS opt_ath.h
588 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
589 ATH_KTR_INTR_DEBUG opt_ath.h
590 #ATH_TX99_DIAG opt_ath.h
593 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
596 #AH_DEBUG_ALQ opt_ah.h
597 #AH_DEBUG_COUNTRY opt_ah.h
598 AH_INTERRUPT_DEBUGGING opt_ah.h
600 AH_NEED_DESC_SWAP opt_ah.h
601 AH_PRIVATE_DIAG opt_ah.h
602 AH_REGOPS_FUNC opt_ah.h
603 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
604 AH_SUPPORT_AR5416 opt_ah.h
605 AH_SUPPORT_AR9130 opt_ah.h
606 AH_SUPPORT_AR9330 opt_ah.h
607 AH_SUPPORT_AR9340 opt_ah.h
608 AH_USE_INIPDGAIN opt_ah.h
609 #AH_WRITE_EEPROM opt_ah.h
610 #AH_WRITE_REGDOMAIN opt_ah.h
613 BCE_RSS_DEBUG opt_bce.h
614 BCE_TSS_DEBUG opt_bce.h
617 BNX_RSS_DEBUG opt_bnx.h
618 BNX_TSO_DEBUG opt_bnx.h
619 BNX_TSS_DEBUG opt_bnx.h
623 BWN_RXRING_SLOTS opt_bwn.h
624 BWN_TXRING_SLOTS opt_bwn.h
627 SIBA_DEBUG opt_siba.h
630 EMX_RSS_DEBUG opt_emx.h
631 EMX_TSO_DEBUG opt_emx.h
632 EMX_TSS_DEBUG opt_emx.h
635 JME_RSS_DEBUG opt_jme.h
638 IGB_RSS_DEBUG opt_igb.h
639 IGB_TSS_DEBUG opt_igb.h
640 IGB_MSIX_DEBUG opt_igb.h
643 IX_RSS_DEBUG opt_ix.h
645 # Options for the Intel 802.11n wireless driver
649 DCONS_BUF_SIZE opt_dcons.h
650 DCONS_POLL_HZ opt_dcons.h
651 DCONS_FORCE_CONSOLE opt_dcons.h
652 DCONS_FORCE_GDB opt_dcons.h
654 # deprecated drivers and options
655 I_WANT_DEPRECATED_STUFF opt_deprecated.h
658 DSCHED_AS opt_dsched.h
659 DSCHED_BFQ opt_dsched.h
660 DSCHED_FQ opt_dsched.h
662 # Receive Side Scaling (now basecode)
666 WDOG_DISABLE_ON_PANIC opt_panic.h
667 ERROR_LED_ON_PANIC opt_panic.h
669 # 802.11 support layer
670 IEEE80211_DEBUG opt_wlan.h
671 IEEE80211_DEBUG_REFCNT opt_wlan.h
672 IEEE80211_AMPDU_AGE opt_wlan.h
673 IEEE80211_SUPPORT_MESH opt_wlan.h
674 IEEE80211_SUPPORT_SUPERG opt_wlan.h
675 IEEE80211_SUPPORT_TDMA opt_wlan.h
677 # 802.11 TDMA support
678 TDMA_SLOTLEN_DEFAULT opt_tdma.h
679 TDMA_SLOTCNT_DEFAULT opt_tdma.h
680 TDMA_BINTVAL_DEFAULT opt_tdma.h
681 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
682 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
683 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
684 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
685 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
686 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
687 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
688 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
692 SND_DIAGNOSTIC opt_snd.h
693 SND_FEEDER_MULTIFORMAT opt_snd.h
694 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
695 SND_FEEDER_RATE_HP opt_snd.h
697 SND_OLDSTEREO opt_snd.h
699 PANIC_REBOOT_WAIT_TIME opt_panic.h
701 # Obsolete options (will be removed in the future)
703 SYSVMSG opt_dontuse.h
704 SYSVSEM opt_dontuse.h
705 SYSVSHM opt_dontuse.h
706 P1003_1B opt_dontuse.h
707 _KPOSIX_VERSION opt_dontuse.h