2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14 # to manual backup dir
15 # restoreworld- installs binaries from manual backup dir to world
16 # restoreworld-auto - installs binaries from auto-backup dir to world
17 # most - build user commands, no libraries or include files
18 # installmost - install user commands, no libraries or include files
19 # backup-clean - delete backup from manual backup dir
20 # backup-auto-clean - delete backup from auto-backup dir
22 # Standard targets (not defined here) are documented in the makefiles in
23 # /usr/share/mk. These include:
24 # obj depend all install clean cleandepend cleanobj
26 # Put initial settings here.
29 # We must do share/info early so that installation of info `dir'
30 # entries works correctly. Do it first since it is less likely to
31 # grow dependencies on include and lib than vice versa.
32 .if exists(${.CURDIR}/share/info)
36 # We must do include and lib early so that the perl *.ph generation
37 # works correctly as it uses the header files installed by this.
38 .if exists(${.CURDIR}/include)
41 .if exists(${.CURDIR}/lib)
44 # This exists simply to ensure that the obj dir hierarchy is
45 # intact for nrelease, allowing the nrelease Makefile's to
46 # reference ${.OBJDIR}.
48 .if exists(${.CURDIR}/nrelease)
52 .if exists(${.CURDIR}/bin)
55 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
58 .if exists(${.CURDIR}/gnu)
61 .if exists(${.CURDIR}/libexec)
64 .if exists(${.CURDIR}/sbin)
67 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
70 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
73 .if exists(${.CURDIR}/sys)
76 .if exists(${.CURDIR}/usr.bin)
79 .if exists(${.CURDIR}/usr.sbin)
83 .if exists(${.CURDIR}/etc)
87 # These are last, since it is nice to at least get the base system
88 # rebuilt before you do them.
89 .if defined(LOCAL_DIRS)
90 .for _DIR in ${LOCAL_DIRS}
91 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
97 .if defined(SUBDIR_OVERRIDE)
98 SUBDIR= ${SUBDIR_OVERRIDE}
101 .if defined(NOCLEANDIR)
102 CLEANDIR= clean cleandepend
107 .if defined(NO_CLEAN)
111 # Object directory base in primary make. Note that when we rerun make
112 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
113 # subdirectory because the rest of the build system needs it that way.
114 # The original object directory base is saved in OBJTREE.
116 MAKEOBJDIRPREFIX?= /usr/obj
117 OBJTREE?= ${MAKEOBJDIRPREFIX}
119 # Used for stage installs and pathing
121 DESTDIRBASE?= ${OBJTREE}${.CURDIR}
123 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
124 # anyhow, and we need to be able to override it for stage installs
125 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
127 # This section sets the tools used to build the world/kernel
130 WORLD_BINUTILSVER?= binutils222
132 # Set the backup parameters if they are not already defined
134 WORLD_BACKUP?= /var/backups/world_backup
135 AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
137 # temporary until everybody has converted to x86_64
138 .if ${MACHINE_ARCH} == "amd64"
140 .if defined(.PARSEDIR)
143 # LEGACY MAKE - REMOVE FOR DFLY 3.6
144 .makeenv MACHINE_ARCH
148 TARGET_ARCH?= ${MACHINE_ARCH}
149 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
152 TARGET?= ${TARGET_ARCH}
155 BUILD_ARCH!= sysctl -n hw.machine_arch
157 # temporary until everybody has converted to x86_64
158 .if ${BUILD_ARCH} == "amd64"
162 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
163 .error To cross-build, set TARGET_ARCH.
167 # Backwards compatibility with older make's or older sys.mk's. make
168 # is expected to define MACHINE_PLATFORM.
170 .if !defined(MACHINE_PLATFORM)
171 MACHINE_PLATFORM= pc32
174 # XXX this is ugly and we need to come up with a nicer solution
175 .if !defined(TARGET_PLATFORM)
176 .if ${TARGET_ARCH} == "i386"
177 TARGET_PLATFORM= pc32
178 .elif ${TARGET_ARCH} == "x86_64"
179 TARGET_PLATFORM= pc64
181 .error Unknown target architecture.
185 THREAD_LIB?= thread_xu
186 .if ${THREAD_LIB} == "c_r"
187 .if defined(NO_LIBC_R)
188 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
192 # BTOOLS (Natively built) All non-cross-development tools that the
193 # main build needs. This includes things like 'mkdir' and 'rm'.
194 # We will not use the native system's exec path once we start
195 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
197 # CTOOLS (Natively built) Cross development tools which are specific
198 # to the target architecture.
200 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
203 # MACHINE_PLATFORM Platform Architecture we are building on
204 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
205 # MACHINE_ARCH Cpu Architecture we are building on
207 # TARGET_PLATFORM Platform Architecture we are building for
208 # TARGET Machine Architecture we are building for
209 # TARGET_ARCH Cpu Architecture we are building for
211 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
212 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
213 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
215 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
216 # cross-tools stages to augment the existing command path to access newer
217 # versions of certain utilities such as 'patch' that the cross-tools stage
220 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
222 # The strict temporary command path contains all binaries required
223 # by the buildworld system after the cross-tools stage.
225 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin:/usr/local/bin
231 # Building a world goes through the following stages
233 # 1. bootstrap-tool stage [BMAKE]
234 # This stage is responsible for creating programs that
235 # are needed for backward compatibility reasons. They
236 # are not built as cross-tools.
237 # 2. build-tool stage [TMAKE]
238 # This stage is responsible for creating the object
239 # tree and building any tools that are needed during
241 # 3. cross-tool stage [XMAKE]
242 # This stage is responsible for creating any tools that
243 # are needed for cross-builds. A cross-compiler is one
245 # 4. world stage [WMAKE]
246 # This stage actually builds the world.
247 # 5. install stage (optional) [IMAKE]
248 # This stage installs a previously built world.
250 # In all cases we must carefully adjust the environment so the proper
251 # tools and header files are used.
253 # NOTE: The M4 environment variable is used by the [f]lex binary to
254 # override the location of the 'm4' binary. The override is
255 # needed for certain buildworld version transitions, specifically
256 # past a certain point in 3.3 because the older /usr/bin/m4 will
257 # generate output that will blow up the newer [f]lex/yacc/bison
261 # bootstrap-tool stage
263 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
265 DESTDIR=${BTOOLSDEST} \
266 PATH=${BTOOLSPATH}:${PATH} \
267 M4=${BTOOLSDEST}/usr/bin/m4 \
268 INSTALL="sh ${.CURDIR}/tools/install.sh"
270 BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
271 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
276 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
279 PATH=${BTOOLSPATH}:${PATH} \
280 M4=${BTOOLSDEST}/usr/bin/m4 \
281 INSTALL="sh ${.CURDIR}/tools/install.sh"
283 TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
284 -DNO_FORTRAN -DNOSHARED
288 # note: TOOLS_PREFIX points to the obj root holding the cross
289 # compiler binaries, while USRDATA_PREFIX points to the obj root
290 # holding the target environment (and also determines where cross-built
291 # libraries, crt*.o, and include files are installed).
293 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
295 DESTDIR=${CTOOLSDEST} \
296 INSTALL="sh ${.CURDIR}/tools/install.sh" \
297 TOOLS_PREFIX=${CTOOLSDEST} \
298 USRDATA_PREFIX=${WORLDDEST} \
299 M4=${BTOOLSDEST}/usr/bin/m4 \
300 PATH=${BTOOLSPATH}:${PATH}
302 XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
303 -DBOOTSTRAPPING -DNOSHARED
305 # world stage, note the strict path and note that TOOLS_PREFIX is left
306 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
307 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
308 # for both binary and library paths, even though it is being compiled to
309 # WORLDDEST. None of the programs in the world stage are ever actually
310 # executed during the buildworld/installworld.
312 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
314 MACHINE_ARCH=${TARGET_ARCH} \
316 MACHINE_PLATFORM=${TARGET_PLATFORM} \
317 OBJFORMAT_PATH=${CTOOLSDEST} \
318 HOST_CCVER=${HOST_CCVER} \
319 CCVER=${WORLD_CCVER} \
320 LDVER=${WORLD_LDVER} \
321 BINUTILSVER=${WORLD_BINUTILSVER}
323 WMAKEENV= ${CROSSENV} \
324 DESTDIR=${WORLDDEST} \
325 INSTALL="sh ${.CURDIR}/tools/install.sh" \
326 M4=${BTOOLSDEST}/usr/bin/m4 \
327 PATH=${STRICTTMPPATH}
329 WMAKE= ${WMAKEENV} make -f Makefile.inc1
333 IMAKEENV= ${CROSSENV} \
334 PATH=${STRICTTMPPATH}
335 IMAKE= ${IMAKEENV} make -f Makefile.inc1
339 KMAKEENV= ${WMAKEENV}
343 # Attempt to rebuild the entire system, with reasonable chance of
344 # success, regardless of how old your existing system is.
346 _worldtmp: _cleantmp _mtreetmp
347 .ORDER: _cleantmp _mtreetmp
351 @echo "--------------------------------------------------------------"
352 @echo ">>> Rebuilding the temporary build tree"
353 @echo "--------------------------------------------------------------"
354 .if !defined(NOCLEAN)
355 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
357 # XXX - These two can depend on any header file.
358 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
359 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
363 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
364 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
365 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
366 -p ${_dir}/ > /dev/null
367 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
368 -p ${_dir}/usr > /dev/null
370 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
371 -p ${WORLDDEST}/usr/include > /dev/null
372 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
376 @echo "--------------------------------------------------------------"
377 @echo ">>> stage 1: bootstrap tools"
378 @echo "--------------------------------------------------------------"
379 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
382 @echo "--------------------------------------------------------------"
383 @echo ">>> stage 2a: cleaning up the object tree"
384 @echo "--------------------------------------------------------------"
385 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
388 @echo "--------------------------------------------------------------"
389 @echo ">>> stage 2b: rebuilding the object tree"
390 @echo "--------------------------------------------------------------"
391 cd ${.CURDIR}; ${WMAKE} par-obj
394 @echo "--------------------------------------------------------------"
395 @echo ">>> stage 2c: build tools"
396 @echo "--------------------------------------------------------------"
397 cd ${.CURDIR}; ${TMAKE} build-tools
400 @echo "--------------------------------------------------------------"
401 @echo ">>> stage 3: cross tools"
402 @echo "--------------------------------------------------------------"
403 cd ${.CURDIR}; ${XMAKE} cross-tools
406 @echo "--------------------------------------------------------------"
407 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
408 @echo "--------------------------------------------------------------"
409 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
412 @echo "--------------------------------------------------------------"
413 @echo ">>> stage 4b: building libraries"
414 @echo "--------------------------------------------------------------"
415 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
418 @echo "--------------------------------------------------------------"
419 @echo ">>> stage 4c: make dependencies"
420 @echo "--------------------------------------------------------------"
421 cd ${.CURDIR}; ${WMAKE} par-depend
424 @echo "--------------------------------------------------------------"
425 @echo ">>> stage 4d: building everything.."
426 @echo "--------------------------------------------------------------"
427 cd ${.CURDIR}; ${WMAKE} all
429 # note: buildworld no longer depends on _cleanobj because we rm -rf the
430 # entire object tree and built the bootstrap tools in a different location.
432 # buildworld - build everything from scratch
433 # quickworld - skip the bootstrap, build, and cross-build steps
434 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
436 # note: we include _obj in realquickworld to prevent accidental creation
437 # of files in /usr/src.
440 .if !defined(SUBDIR_OVERRIDE)
441 WMAKE_TGTS+= _worldtmp _bootstrap-tools
443 WMAKE_TGTS+= _obj _build-tools
444 .if !defined(SUBDIR_OVERRIDE)
445 WMAKE_TGTS+= _cross-tools
447 WMAKE_TGTS+= _includes _libraries _depend everything
449 buildworld: ${WMAKE_TGTS}
451 quickworld: _mtreetmp _obj _includes _libraries _depend everything
453 realquickworld: _mtreetmp _obj _includes _libraries everything
455 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
457 .ORDER: ${WMAKE_TGTS}
458 .ORDER: _obj _includes
459 .ORDER: _mtreetmp _obj
460 .ORDER: installcheck backupworld-auto
465 # Checks to be sure system is ready for installworld
468 .if !defined(NO_SENDMAIL)
469 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
470 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
472 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
473 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
474 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
475 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
476 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
481 # Installs everything compiled by a 'buildworld'.
483 installworld: installcheck backupworld-auto
484 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
485 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
490 # If you have a build server, you can NFS mount the source and obj directories
491 # and do a 'make reinstall' on the *client* to install new binaries from the
492 # most recent server build.
495 @echo "--------------------------------------------------------------"
496 @echo ">>> Making hierarchy"
497 @echo "--------------------------------------------------------------"
498 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
500 @echo "--------------------------------------------------------------"
501 @echo ">>> Installing everything.."
502 @echo "--------------------------------------------------------------"
503 cd ${.CURDIR}; make -f Makefile.inc1 install
506 # buildkernel, nativekernel, quickkernel, and installkernel
508 # Which kernels to build and/or install is specified by setting
509 # KERNCONF. If not defined a GENERIC kernel is built/installed.
510 # Only the existing (depending TARGET) config files are used
511 # for building kernels and only the first of these is designated
512 # as the one being installed.
514 # You can specify INSTALLSTRIPPED=1 if you wish the installed
515 # kernel and modules to be stripped of its debug info (required
516 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
517 # if you only want to strip the modules of their debug info. These
518 # only apply if you have DEBUG=-g in your kernel config or make line.
520 # Note that we have to use TARGET instead of TARGET_ARCH when
521 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
522 # be set to cross-build, we have to make sure TARGET is set
525 .if !defined(KERNCONF) && defined(KERNEL)
529 # XXX makeshift fix to build the right kernel for the (target) architecture
530 # We should configure this in the platform files somehow
531 .if ${TARGET_ARCH} == "i386"
534 KERNCONF?= X86_64_GENERIC
537 INSTKERNNAME?= kernel
539 KRNLSRCDIR= ${.CURDIR}/sys
540 KRNLCONFDIR= ${KRNLSRCDIR}/config
541 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
542 KERNCONFDIR?= ${KRNLCONFDIR}
546 .for _kernel in ${KERNCONF}
547 .if exists(${KERNCONFDIR}/${_kernel})
548 BUILDKERNELS+= ${_kernel}
549 .if empty(INSTALLKERNEL)
550 INSTALLKERNEL= ${_kernel}
555 # kernel version numbers survive rm -rf
557 .for _kernel in ${BUILDKERNELS}
558 .if exists(${KRNLOBJDIR}/${_kernel}/version)
559 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
566 # Builds all kernels defined by BUILDKERNELS.
569 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
570 echo "You must buildworld before buildkernel. If you wish"; \
571 echo "to build a kernel using native tools, config it manually"; \
572 echo "or use the nativekernel target if you are in a rush"; \
577 .for _kernel in ${BUILDKERNELS}
578 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
579 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
580 echo "The kernel was build using buildworld tools which no" ; \
581 echo "longer appear to exist, quickkernel failed!" ; \
588 .if empty(BUILDKERNELS)
589 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
590 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
595 .if defined(KERNWARN)
596 @echo "--------------------------------------------------------------"
597 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
598 @echo "--------------------------------------------------------------"
603 # The buildkernel target rebuilds the specified kernels from scratch
604 # using the crossbuild tools generated by the last buildworld. It is
605 # the safest (but also the most time consuming) way to build a new kernel.
607 buildkernel: bk_tools bk_build_list bk_kernwarn
608 .for _kernel in ${BUILDKERNELS}
609 @echo "--------------------------------------------------------------"
610 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
611 @echo "--------------------------------------------------------------"
612 @echo "===> ${_kernel}"
613 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
614 rm -rf ${KRNLOBJDIR}/${_kernel}
616 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
617 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
618 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
620 mkdir -p ${KRNLOBJDIR}
621 .if !defined(NO_KERNELCONFIG)
623 PATH=${STRICTTMPPATH} \
624 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
625 ${KERNCONFDIR}/${_kernel}
627 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
628 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
630 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
631 .if !defined(NO_KERNELDEPEND)
632 cd ${KRNLOBJDIR}/${_kernel}; \
633 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
635 cd ${KRNLOBJDIR}/${_kernel}; \
636 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
637 @echo "--------------------------------------------------------------"
638 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
639 @echo "--------------------------------------------------------------"
642 # The nativekernel target rebuilds the specified kernels from scratch
643 # using the system's standard compiler rather than using the crossbuild
644 # tools generated by the last buildworld. This is fairly safe if your
645 # system is reasonable up-to-date.
647 nativekernel: bk_build_list bk_kernwarn
648 .for _kernel in ${BUILDKERNELS}
649 @echo "--------------------------------------------------------------"
650 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
651 @echo "--------------------------------------------------------------"
652 @echo "===> ${_kernel}"
653 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
654 rm -rf ${KRNLOBJDIR}/${_kernel}
656 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
657 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
658 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
660 mkdir -p ${KRNLOBJDIR}
661 .if !defined(NO_KERNELCONFIG)
663 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
664 ${KERNCONFDIR}/${_kernel}
666 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
667 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
669 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
670 cd ${KRNLOBJDIR}/${_kernel}; \
671 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
672 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
673 .if !defined(NO_KERNELDEPEND)
674 cd ${KRNLOBJDIR}/${_kernel}; \
675 make KERNEL=${INSTKERNNAME} depend
677 cd ${KRNLOBJDIR}/${_kernel}; \
678 make KERNEL=${INSTKERNNAME} all
679 @echo "--------------------------------------------------------------"
680 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
681 @echo "--------------------------------------------------------------"
684 # The quickkernel target rebuilds the specified kernels as quickly
685 # as possible. It will use the native tools or the buildworld cross tools
686 # based on whether the kernel was originally generated via buildkernel or
687 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
688 # nor is the make depend step run.
690 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
691 .for _kernel in ${BUILDKERNELS}
692 @echo "--------------------------------------------------------------"
693 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
694 @echo "--------------------------------------------------------------"
695 @echo "===> ${_kernel}"
696 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
697 .if !defined(NO_KERNELCONFIG)
699 PATH=${STRICTTMPPATH} \
700 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
701 ${KERNCONFDIR}/${_kernel}
703 cd ${KRNLOBJDIR}/${_kernel}; \
704 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
706 .if !defined(NO_KERNELCONFIG)
708 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
709 ${KERNCONFDIR}/${_kernel}
711 cd ${KRNLOBJDIR}/${_kernel}; \
712 make KERNEL=${INSTKERNNAME} all
714 @echo "--------------------------------------------------------------"
715 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
716 @echo "--------------------------------------------------------------"
722 # Install the kernel defined by INSTALLKERNEL
724 installkernel reinstallkernel:
725 @echo "--------------------------------------------------------------"
726 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
727 @echo "--------------------------------------------------------------"
728 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
729 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
730 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
732 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
733 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
739 # Build most of the user binaries on the existing system libs and includes.
742 @echo "--------------------------------------------------------------"
743 @echo ">>> Building programs only"
744 @echo "--------------------------------------------------------------"
745 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
746 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
752 # Install the binaries built by the 'most' target. This does not include
753 # libraries or include files.
756 @echo "--------------------------------------------------------------"
757 @echo ">>> Installing programs only"
758 @echo "--------------------------------------------------------------"
759 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
760 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
764 # ------------------------------------------------------------------------
766 # From here onwards are utility targets used by the 'make world' and
767 # related targets. If your 'world' breaks, you may like to try to fix
768 # the problem and manually run the following targets to attempt to
769 # complete the build. Beware, this is *not* guaranteed to work, you
770 # need to have a pretty good grip on the current state of the system
771 # to attempt to manually finish it. If in doubt, 'make world' again.
774 # bootstrap-tools: Build all tools required to build all tools. Note that
775 # order is important in a number of cases and also note that the bootstrap
776 # and build tools stages have access to earlier binaries they themselves
779 # patch: older patch's do not have -i. This program must be built
780 # first so other bootstrap tools that need to apply patches
782 # [x]install: dependancies on various new install features
783 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
784 # envs are not compatible with older objformat binaries.
786 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
787 _strfile= games/fortune/strfile
790 # BSTRAPDIRS1 - must be built in strict order, no parallelism
792 # order is very important. yacc before m4 before flex. flex exec's m4,
793 # m4's parser file needs the latest byacc (insanity!).
795 BSTRAPDIRS1= ${_strfile} \
797 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
798 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
799 bin/hostname bin/kill \
800 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
801 usr.bin/uudecode usr.bin/xinstall \
802 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
803 usr.bin/find usr.bin/flex
805 # BSTRAPDIRS2 - may built in parallel
808 usr.bin/sed usr.bin/uname usr.bin/touch \
809 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
810 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
811 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
812 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
813 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
814 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
815 usr.bin/tail usr.bin/unifdef usr.bin/tic \
816 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
817 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
818 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
819 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
821 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
822 touch ${BTOOLSDEST}/.bootstrap_done
824 bootstrap-tools-before:
825 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
827 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
829 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
831 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
833 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
835 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
837 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
838 cd ${.CURDIR}/${_tool}; \
839 make DIRPRFX=${_tool}/ obj; \
840 make DIRPRFX=${_tool}/ depend; \
841 make DIRPRFX=${_tool}/ all; \
842 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
845 # build-tools: Build special purpose build tools.
847 # XXX we may be able to remove or consolidate this into bootstrap-tools
848 # now that we have the native helper (.nx/.no) infrastructure.
850 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
851 _share= share/syscons/scrnmaps
854 _gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
855 .if !defined(NO_GCC44)
856 _gcc44_cross= gnu/usr.bin/cc44
857 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
859 _gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
860 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
861 _custom_cross= libexec/customcc
862 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
864 BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
866 build-tools: build-tools-targets
867 touch ${BTOOLSDEST}/.build_done
869 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
871 .ORDER: ${_gcc44_tools:S/^/btools-/}
872 .ORDER: ${_gcc47_tools:S/^/btools-/}
874 .for _tool in ${BTOOLSDIRS}
876 ${ECHODIR} "===> ${_tool} (build-tools)"; \
877 cd ${.CURDIR}/${_tool}; \
878 make DIRPRFX=${_tool}/ obj; \
879 make DIRPRFX=${_tool}/ depend; \
880 make DIRPRFX=${_tool}/ all; \
881 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
885 # cross-tools: Build cross-building tools
887 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
888 _btxld= usr.sbin/btxld
891 CTOOLSDIRS= ${_btxld} ${_binutils} usr.bin/objformat ${_gcc_common_cross} \
892 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
894 cross-tools: cross-tools-targets
895 touch ${CTOOLSDEST}/.cross_done
897 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
899 .for _tool in ${CTOOLSDIRS}
901 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
902 cd ${.CURDIR}/${_tool}; \
903 make DIRPRFX=${_tool}/ obj; \
904 make DIRPRFX=${_tool}/ depend; \
905 make DIRPRFX=${_tool}/ all; \
906 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
910 # hierarchy - ensure that all the needed directories are present
913 cd ${.CURDIR}/etc; make distrib-dirs
916 # libraries - build all libraries, and install them under ${DESTDIR}.
918 # The list of libraries with dependents (${_prebuild_libs}) and their
919 # interdependencies (__L) are built automatically by the
920 # ${.CURDIR}/tools/make_libdeps.sh script.
922 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
923 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
927 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
928 make -f Makefile.inc1 _startup_libs47;
929 .if !defined(NO_GCC44)
931 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
932 make -f Makefile.inc1 _startup_libs44;
935 make -f Makefile.inc1 _startup_libs; \
936 make -f Makefile.inc1 _prebuild_libs; \
937 make -f Makefile.inc1 _generic_libs;
938 touch ${WORLDDEST}/.libraries_done
940 # These dependencies are not automatically generated:
942 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
943 # shared libraries for ELF. The target for _startup_libsXX is
944 # specifically built using gccXX.
946 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
947 gnu/usr.bin/cc47/cc_tools \
949 gnu/lib/gcc47/libgcc \
950 gnu/lib/gcc47/libgcc_eh \
951 gnu/lib/gcc47/libgcc_pic
952 _startup_libs44= gnu/usr.bin/cc44/cc_prep \
953 gnu/usr.bin/cc44/cc_tools \
956 _startup_libs= lib/csu lib/libc lib/libc_rtld
958 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
959 _prebuild_libs+= lib/libutil
961 _generic_libs= gnu/lib
963 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
964 lib/libncurses/libncurses lib/libopie
966 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
970 .if !defined(NO_CRYPT)
971 .if !defined(NO_OPENSSL)
972 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
973 .if !defined(NO_OPENSSH)
974 _prebuild_libs+= secure/lib/libssh
975 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
978 _generic_libs+= secure/lib
981 _prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
982 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
983 lib/libpthread lib/libprop lib/libdevattr
985 _generic_libs+= usr.bin/flex/lib
987 .for _lib in ${_startup_libs44} ${_startup_libs47} \
988 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
990 .if exists(${.CURDIR}/${_lib})
991 ${ECHODIR} "===> ${_lib}"; \
992 cd ${.CURDIR}/${_lib}; \
993 make DIRPRFX=${_lib}/ depend; \
994 make DIRPRFX=${_lib}/ all; \
995 make DIRPRFX=${_lib}/ install
999 _startup_libs: ${_startup_libs:S/$/__L/}
1000 _startup_libs47: ${_startup_libs47:S/$/__L/}
1001 _startup_libs44: ${_startup_libs44:S/$/__L/}
1002 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1003 _generic_libs: ${_generic_libs:S/$/__L/}
1005 # library targets must be ordered because there are inter-library
1006 # races (e.g. generation of tconfig.h)
1008 .ORDER: ${_startup_libs47:S/$/__L/}
1009 .ORDER: ${_startup_libs44:S/$/__L/}
1010 .ORDER: ${_startup_libs:S/$/__L/}
1011 .ORDER: ${_prebuild_libs:S/$/__L/}
1012 .ORDER: ${_generic_libs:S/$/__L/}
1014 .for __target in clean cleandepend cleandir obj depend includes
1015 .for entry in ${SUBDIR}
1016 ${entry}.${__target}__D: .PHONY
1017 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1018 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1019 edir=${entry}.${MACHINE_ARCH}; \
1020 cd ${.CURDIR}/$${edir}; \
1022 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1024 cd ${.CURDIR}/$${edir}; \
1026 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1028 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1029 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1031 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1033 # The wmake target is used by /usr/bin/wmake to run make in a
1034 # world build environment.
1037 @echo '${WMAKEENV} make ${WMAKE_ARGS}'
1040 @echo '${WMAKEENV} /bin/sh'
1043 @echo '${BMAKEENV} make ${BMAKE_ARGS}'
1046 @echo '${BMAKEENV} /bin/sh'
1049 @echo '${TMAKEENV} make ${TMAKE_ARGS}'
1052 @echo '${TMAKEENV} /bin/sh'
1055 @echo '${XMAKEENV} make ${XMAKE_ARGS}'
1058 @echo '${XMAKEENV} /bin/sh'
1060 backupworld: backup-clean
1061 @mkdir -p ${WORLD_BACKUP}
1062 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1063 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1064 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1065 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1066 --options gzip:compression-level=1 \
1067 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1071 .if !defined(NO_BACKUP)
1072 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1073 @mkdir -p ${AUTO_BACKUP}
1074 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1075 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1076 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1077 tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1078 --options gzip:compression-level=1 \
1079 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1084 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1087 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1090 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1091 @echo "There does not seem to be a valid archive present."
1093 @echo "Restoring system binaries from manual backup archive..."
1094 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1095 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1096 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1097 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1101 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1102 @echo "There does not seem to be a valid archive present."
1104 @echo "Restoring system binaries from auto-backup archive..."
1105 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1106 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1107 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1108 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1111 # Take advantage of bmake error response
1113 MAKE_PRINT_VAR_ON_ERROR= \
1124 .include <bsd.subdir.mk>