/*- * Copyright (c) 2005 Poul-Henning Kamp * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/acpica/acpi_hpet.c,v 1.12.2.1.2.1 2008/11/25 02:59:29 kensmith Exp $ */ #include "opt_acpi.h" #include #include #include #include #include #include #if !defined(KLD_MODULE) #include #endif #include "acpi.h" #include "accommon.h" #include "acpivar.h" #include "acpi_hpet.h" #if !defined(KLD_MODULE) #include #endif /* Hooks for the ACPICA debugging infrastructure */ #define _COMPONENT ACPI_TIMER ACPI_MODULE_NAME("HPET") static bus_space_handle_t acpi_hpet_bsh; static bus_space_tag_t acpi_hpet_bst; static u_long acpi_hpet_res_start; struct acpi_hpet_softc { device_t dev; struct resource *mem_res; ACPI_HANDLE handle; }; #define DEV_HPET(x) (acpi_get_magic(x) == (uintptr_t)&acpi_hpet_devclass) static sysclock_t acpi_hpet_get_timecount(void); static void acpi_hpet_construct(struct cputimer *, sysclock_t); static int acpi_hpet_identify(driver_t *, device_t); static int acpi_hpet_probe(device_t); static int acpi_hpet_attach(device_t); static int acpi_hpet_resume(device_t); static int acpi_hpet_suspend(device_t); static void acpi_hpet_test(struct acpi_hpet_softc *sc); static u_int acpi_hpet_read(void); static void acpi_hpet_enable(struct acpi_hpet_softc *); static void acpi_hpet_disable(struct acpi_hpet_softc *); static char *hpet_ids[] = { "PNP0103", NULL }; static struct cputimer acpi_hpet_timer = { .next = SLIST_ENTRY_INITIALIZER, .name = "HPET", .pri = CPUTIMER_PRI_HPET, .type = CPUTIMER_HPET, .count = acpi_hpet_get_timecount, .fromhz = cputimer_default_fromhz, .fromus = cputimer_default_fromus, .construct = acpi_hpet_construct, .destruct = cputimer_default_destruct, .freq = 0 /* determined later */ }; static device_method_t acpi_hpet_methods[] = { DEVMETHOD(device_identify, acpi_hpet_identify), DEVMETHOD(device_probe, acpi_hpet_probe), DEVMETHOD(device_attach, acpi_hpet_attach), DEVMETHOD(device_suspend, acpi_hpet_suspend), DEVMETHOD(device_resume, acpi_hpet_resume), DEVMETHOD_END }; static driver_t acpi_hpet_driver = { "acpi_hpet", acpi_hpet_methods, sizeof(struct acpi_hpet_softc), .gpri = KOBJ_GPRI_ACPI+2 }; static devclass_t acpi_hpet_devclass; DRIVER_MODULE(acpi_hpet, acpi, acpi_hpet_driver, acpi_hpet_devclass, NULL, NULL); MODULE_DEPEND(acpi_hpet, acpi, 1, 1, 1); static u_int acpi_hpet_read(void) { return bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); } #if !defined(KLD_MODULE) extern int i8254_cputimer_disable; static vm_offset_t ptr = 0; static int acpi_hpet_for_calibration = 1; TUNABLE_INT("hw.calibrate_timers_with_hpet", &acpi_hpet_for_calibration); static sysclock_t acpi_hpet_early_get_timecount(void) { return readl(ptr + HPET_MAIN_COUNTER) + acpi_hpet_timer.base; } static void acpi_hpet_early_construct(struct cputimer *timer, sysclock_t oldclock) { uint32_t val; val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val | HPET_CNF_ENABLE); timer->base = 0; timer->base = oldclock - acpi_hpet_early_get_timecount(); } static void acpi_hpet_early_destruct(struct cputimer *timer) { uint32_t val; val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val & ~HPET_CNF_ENABLE); } static int acpi_hpet_early_init(void) { uintmax_t freq; uint64_t old_tsc, new_tsc; uint32_t val, val2; val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val | HPET_CNF_ENABLE); /* Read basic statistics about the timer. */ val = readl(ptr + HPET_PERIOD); if (val == 0) { kprintf("acpi_hpet: invalid period\n"); val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val & ~HPET_CNF_ENABLE); return ENXIO; } freq = (1000000000000000LL + val / 2) / val; if (bootverbose) { val = readl(ptr + HPET_CAPABILITIES); kprintf("acpi_hpet: " "vend: 0x%x, rev: 0x%x, num: %d, opts:%s%s\n", val >> 16, val & HPET_CAP_REV_ID, (val & HPET_CAP_NUM_TIM) >> 8, (val & HPET_CAP_LEG_RT) ? " legacy_route" : "", (val & HPET_CAP_COUNT_SIZE) ? " 64-bit" : ""); } #if 0 if (ktestenv("debug.acpi.hpet_test")) acpi_hpet_test(sc); #endif /* * Don't attach if the timer never increments. Since the spec * requires it to be at least 10 MHz, it has to change in 1 us. */ val = readl(ptr + HPET_MAIN_COUNTER); /* This delay correspond to 1us, even at 6 GHz TSC. */ old_tsc = rdtsc(); do { cpu_pause(); new_tsc = rdtsc(); } while (new_tsc - old_tsc < 6000); val2 = readl(ptr + HPET_MAIN_COUNTER); if (val == val2) { kprintf("acpi_hpet: HPET never increments, disabling\n"); val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val & ~HPET_CNF_ENABLE); return ENXIO; } val = readl(ptr + HPET_CONFIG); writel(ptr + HPET_CONFIG, val & ~HPET_CNF_ENABLE); acpi_hpet_timer.freq = freq; kprintf("acpi_hpet: frequency %u\n", acpi_hpet_timer.freq); acpi_hpet_timer.count = acpi_hpet_early_get_timecount; acpi_hpet_timer.construct = acpi_hpet_early_construct; acpi_hpet_timer.destruct = acpi_hpet_early_destruct; cputimer_register(&acpi_hpet_timer); cputimer_select(&acpi_hpet_timer, 0); return 0; } static void acpi_hpet_cputimer_register(void) { ACPI_TABLE_HPET *hpet; vm_paddr_t hpet_paddr; if (acpi_hpet_for_calibration == 0) return; if (acpi_disabled("hpet")) return; hpet_paddr = sdt_search(ACPI_SIG_HPET); if (hpet_paddr == 0) { if (bootverbose) kprintf("acpi_hpet: can't locate HPET\n"); return; } hpet = sdt_sdth_map(hpet_paddr); if (hpet == NULL) return; if (hpet->Header.Length < 56) { kprintf("acpi_hpet: HPET table too short. Length: 0x%x\n", hpet->Header.Length); return; } if (hpet->Sequence != 0) { kprintf("acpi_hpet: " "HPET table Sequence not 0. Sequence: 0x%x\n", hpet->Id); goto done; } acpi_hpet_res_start = hpet->Address.Address; if (acpi_hpet_res_start == 0) goto done; ptr = (vm_offset_t)pmap_mapdev(acpi_hpet_res_start, HPET_MEM_WIDTH); if (acpi_hpet_early_init() == 0) { i8254_cputimer_disable = 1; } else { pmap_unmapdev(ptr, HPET_MEM_WIDTH); ptr = 0; } done: sdt_sdth_unmap(&hpet->Header); return; } TIMECOUNTER_INIT(acpi_hpet_init, acpi_hpet_cputimer_register); #endif /* * Locate the ACPI timer using the FADT, set up and allocate the I/O resources * we will be using. */ static int acpi_hpet_identify(driver_t *driver, device_t parent) { ACPI_TABLE_HPET *hpet; ACPI_TABLE_HEADER *hdr; ACPI_STATUS status; device_t child; /* * Just try once, do nothing if the 'acpi' bus is rescanned. */ if (device_get_state(parent) == DS_ATTACHED) return 0; ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__); /* Only one HPET device can be added. */ if (devclass_get_device(acpi_hpet_devclass, 0)) return ENXIO; #if !defined(KLD_MODULE) if (ptr != 0) { /* Use data from early boot for attachment. */ child = BUS_ADD_CHILD(parent, parent, 0, "acpi_hpet", 0); if (child == NULL) { device_printf(parent, "%s: can't add acpi_hpet0\n", __func__); return ENXIO; } /* Record a magic value so we can detect this device later. */ acpi_set_magic(child, (uintptr_t)&acpi_hpet_devclass); if (bus_set_resource(child, SYS_RES_MEMORY, 0, acpi_hpet_res_start, HPET_MEM_WIDTH, -1)) { device_printf(child, "could not set iomem resources: 0x%jx, %d\n", (uintmax_t)acpi_hpet_res_start, HPET_MEM_WIDTH); return ENOMEM; } return 0; } #endif /* Currently, ID and minimum clock tick info is unused. */ status = AcpiGetTable(ACPI_SIG_HPET, 1, &hdr); if (ACPI_FAILURE(status)) return ENXIO; /* * The unit number could be derived from hdr->Sequence but we only * support one HPET device. */ hpet = (ACPI_TABLE_HPET *)hdr; if (hpet->Sequence != 0) { kprintf("ACPI HPET table warning: Sequence is non-zero (%d)\n", hpet->Sequence); } child = BUS_ADD_CHILD(parent, parent, 0, "acpi_hpet", 0); if (child == NULL) { device_printf(parent, "%s: can't add acpi_hpet0\n", __func__); return ENXIO; } /* Record a magic value so we can detect this device later. */ acpi_set_magic(child, (uintptr_t)&acpi_hpet_devclass); acpi_hpet_res_start = hpet->Address.Address; if (bus_set_resource(child, SYS_RES_MEMORY, 0, hpet->Address.Address, HPET_MEM_WIDTH, -1)) { device_printf(child, "could not set iomem resources: " "0x%jx, %d\n", (uintmax_t)hpet->Address.Address, HPET_MEM_WIDTH); return ENOMEM; } return 0; } static int acpi_hpet_probe(device_t dev) { ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__); if (acpi_disabled("hpet")) return ENXIO; if (!DEV_HPET(dev) && (ACPI_ID_PROBE(device_get_parent(dev), dev, hpet_ids) == NULL || device_get_unit(dev) != 0)) return ENXIO; device_set_desc(dev, "High Precision Event Timer"); return 0; } static int acpi_hpet_attach(device_t dev) { struct acpi_hpet_softc *sc; int rid; uint32_t val, val2; uintmax_t freq; ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__); sc = device_get_softc(dev); sc->dev = dev; sc->handle = acpi_get_handle(dev); rid = 0; sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->mem_res == NULL) { /* * We only need to make sure that main counter * is accessable. */ device_printf(dev, "can't map %dB register space, try %dB\n", HPET_MEM_WIDTH, HPET_MEM_WIDTH_MIN); rid = 0; sc->mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, acpi_hpet_res_start, acpi_hpet_res_start + HPET_MEM_WIDTH_MIN - 1, HPET_MEM_WIDTH_MIN, RF_ACTIVE); if (sc->mem_res == NULL) return ENOMEM; } /* Validate that we can access the whole region. */ if (rman_get_size(sc->mem_res) < HPET_MEM_WIDTH_MIN) { device_printf(dev, "memory region width %ld too small\n", rman_get_size(sc->mem_res)); bus_release_resource(dev, SYS_RES_MEMORY, rid, sc->mem_res); return ENXIO; } acpi_hpet_bsh = rman_get_bushandle(sc->mem_res); acpi_hpet_bst = rman_get_bustag(sc->mem_res); #if !defined(KLD_MODULE) if (ptr != 0) { /* Use data from early boot for attachment. */ if (ktestenv("debug.acpi.hpet_test")) acpi_hpet_test(sc); return 0; } #endif /* Be sure timer is enabled. */ acpi_hpet_enable(sc); /* Read basic statistics about the timer. */ val = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_PERIOD); if (val == 0) { device_printf(dev, "invalid period\n"); acpi_hpet_disable(sc); bus_release_resource(dev, SYS_RES_MEMORY, rid, sc->mem_res); return ENXIO; } freq = (1000000000000000LL + val / 2) / val; if (bootverbose) { val = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_CAPABILITIES); device_printf(dev, "vend: 0x%x, rev: 0x%x, num: %d, opts:%s%s\n", val >> 16, val & HPET_CAP_REV_ID, (val & HPET_CAP_NUM_TIM) >> 8, (val & HPET_CAP_LEG_RT) ? " legacy_route" : "", (val & HPET_CAP_COUNT_SIZE) ? " 64-bit" : ""); } if (ktestenv("debug.acpi.hpet_test")) acpi_hpet_test(sc); /* * Don't attach if the timer never increments. Since the spec * requires it to be at least 10 MHz, it has to change in 1 us. */ val = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); DELAY(1); val2 = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); if (val == val2) { device_printf(dev, "HPET never increments, disabling\n"); acpi_hpet_disable(sc); bus_release_resource(dev, SYS_RES_MEMORY, rid, sc->mem_res); return ENXIO; } acpi_hpet_timer.freq = freq; device_printf(dev, "frequency %u\n", acpi_hpet_timer.freq); cputimer_register(&acpi_hpet_timer); cputimer_select(&acpi_hpet_timer, 0); return 0; } /* * Construct the timer. Adjust the base so the system clock does not * jump weirdly. */ static void acpi_hpet_construct(struct cputimer *timer, sysclock_t oldclock) { timer->base = 0; timer->base = oldclock - acpi_hpet_get_timecount(); } static sysclock_t acpi_hpet_get_timecount(void) { return acpi_hpet_read() + acpi_hpet_timer.base; } static void acpi_hpet_enable(struct acpi_hpet_softc *sc) { uint32_t val; val = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_CONFIG); bus_space_write_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_CONFIG, val | HPET_CNF_ENABLE); } static void acpi_hpet_disable(struct acpi_hpet_softc *sc) { uint32_t val; val = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_CONFIG); bus_space_write_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_CONFIG, val & ~HPET_CNF_ENABLE); } static int acpi_hpet_suspend(device_t dev) { /* * According to IA-PC HPET specification rev 1.0a * * Page 10, 2.3.3: * "1. The Event Timer registers (including the main counter) * are not expected to be preserved through an S3, S4, or S5 * state." * * Page 11, 2.3.3: * "3. The main counter is permitted, but not required, to run * during S1 or S2 states. ..." * * These mean we are not allowed to enter any of Sx states, * if HPET is used as the sys_cputimer. */ if (sys_cputimer != &acpi_hpet_timer) { struct acpi_hpet_softc *sc; sc = device_get_softc(dev); acpi_hpet_disable(sc); return 0; } else { return EOPNOTSUPP; } } static int acpi_hpet_resume(device_t dev) { if (sys_cputimer != &acpi_hpet_timer) { struct acpi_hpet_softc *sc; sc = device_get_softc(dev); acpi_hpet_enable(sc); } return 0; } /* Print some basic latency/rate information to assist in debugging. */ static void acpi_hpet_test(struct acpi_hpet_softc *sc) { int i; uint32_t u1, u2; struct timeval b0, b1, b2; struct timespec ts; microuptime(&b0); microuptime(&b0); microuptime(&b1); u1 = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); for (i = 1; i < 1000; i++) { u2 = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); } microuptime(&b2); u2 = bus_space_read_4(acpi_hpet_bst, acpi_hpet_bsh, HPET_MAIN_COUNTER); timevalsub(&b2, &b1); timevalsub(&b1, &b0); timevalsub(&b2, &b1); TIMEVAL_TO_TIMESPEC(&b2, &ts); device_printf(sc->dev, "%ld.%09ld: %u ... %u = %u\n", (long)b2.tv_sec, b2.tv_usec, u1, u2, u2 - u1); device_printf(sc->dev, "time per call: %ld ns\n", ts.tv_nsec / 1000); }