/*- * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/dev/acpica/acpi_pcib_acpi.c,v 1.55.8.1 2009/04/15 03:14:26 kensmith Exp $ */ #include "opt_acpi.h" #include #include #include #include #include #include #include #include "acpi.h" #include #include #include #include #include "pcib_if.h" #include /* Hooks for the ACPICA debugging infrastructure. */ #define _COMPONENT ACPI_BUS ACPI_MODULE_NAME("PCI_ACPI") struct acpi_hpcib_softc { device_t ap_dev; ACPI_HANDLE ap_handle; int ap_flags; int ap_segment; /* analagous to Alpha 'hose' */ int ap_bus; /* bios-assigned bus number */ ACPI_BUFFER ap_prt; /* interrupt routing table */ }; static int acpi_pcib_acpi_probe(device_t bus); static int acpi_pcib_acpi_attach(device_t bus); static int acpi_pcib_acpi_resume(device_t bus); static int acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result); static int acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value); static uint32_t acpi_pcib_read_config(device_t dev, int bus, int slot, int func, int reg, int bytes); static void acpi_pcib_write_config(device_t dev, int bus, int slot, int func, int reg, uint32_t data, int bytes); static int acpi_pcib_acpi_route_interrupt(device_t pcib, device_t dev, int pin); static int acpi_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs, int cpuid); static int acpi_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data, int cpuid); static int acpi_pcib_alloc_msix(device_t pcib, device_t dev, int *irq, int cpuid); static struct resource *acpi_pcib_acpi_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags, int cpuid); static device_method_t acpi_pcib_acpi_methods[] = { /* Device interface */ DEVMETHOD(device_probe, acpi_pcib_acpi_probe), DEVMETHOD(device_attach, acpi_pcib_acpi_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, acpi_pcib_acpi_resume), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar), DEVMETHOD(bus_write_ivar, acpi_pcib_write_ivar), DEVMETHOD(bus_alloc_resource, acpi_pcib_acpi_alloc_resource), /* DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource), */ DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), /* pcib interface */ DEVMETHOD(pcib_maxslots, pcib_maxslots), DEVMETHOD(pcib_read_config, acpi_pcib_read_config), DEVMETHOD(pcib_write_config, acpi_pcib_write_config), DEVMETHOD(pcib_route_interrupt, acpi_pcib_acpi_route_interrupt), DEVMETHOD(pcib_alloc_msi, acpi_pcib_alloc_msi), DEVMETHOD(pcib_release_msi, pcib_release_msi), DEVMETHOD(pcib_alloc_msix, acpi_pcib_alloc_msix), DEVMETHOD(pcib_release_msix, pcib_release_msix), DEVMETHOD(pcib_map_msi, acpi_pcib_map_msi), DEVMETHOD_END }; static devclass_t pcib_devclass; DEFINE_CLASS_0(pcib, acpi_pcib_acpi_driver, acpi_pcib_acpi_methods, sizeof(struct acpi_hpcib_softc)); DRIVER_MODULE(acpi_pcib, acpi, acpi_pcib_acpi_driver, pcib_devclass, NULL, NULL); MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1); static int acpi_pcib_acpi_probe(device_t dev) { int error; static char *pcib_ids[] = { "PNP0A03", "PNP0A08", NULL }; if (acpi_disabled("pcib") || ACPI_ID_PROBE(device_get_parent(dev), dev, pcib_ids) == NULL) return (ENXIO); error = acpi_pcib_probe(dev); if (error) return (error); device_set_desc(dev, "ACPI Host-PCI bridge"); return (0); } static int acpi_pcib_acpi_attach(device_t dev) { struct acpi_hpcib_softc *sc; ACPI_STATUS status; static int bus0_seen = 0; u_int addr, slot, func, busok; uint8_t busno; ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); sc = device_get_softc(dev); sc->ap_dev = dev; sc->ap_handle = acpi_get_handle(dev); /* * Get our segment number by evaluating _SEG * It's OK for this to not exist. */ status = acpi_GetInteger(sc->ap_handle, "_SEG", &sc->ap_segment); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { device_printf(dev, "could not evaluate _SEG - %s\n", AcpiFormatException(status)); return_VALUE (ENXIO); } /* If it's not found, assume 0. */ sc->ap_segment = 0; } /* * Get our base bus number by evaluating _BBN. * If this doesn't work, we assume we're bus number 0. * * XXX note that it may also not exist in the case where we are * meant to use a private configuration space mechanism for this bus, * so we should dig out our resources and check to see if we have * anything like that. How do we do this? * XXX If we have the requisite information, and if we don't think the * default PCI configuration space handlers can deal with this bus, * we should attach our own handler. * XXX invoke _REG on this for the PCI config space address space? * XXX It seems many BIOS's with multiple Host-PCI bridges do not set * _BBN correctly. They set _BBN to zero for all bridges. Thus, * if _BBN is zero and PCI bus 0 already exists, we try to read our * bus number from the configuration registers at address _ADR. * We only do this for domain/segment 0 in the hopes that this is * only needed for old single-domain machines. */ status = acpi_GetInteger(sc->ap_handle, "_BBN", &sc->ap_bus); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { device_printf(dev, "could not evaluate _BBN - %s\n", AcpiFormatException(status)); return_VALUE (ENXIO); } else { /* If it's not found, assume 0. */ sc->ap_bus = 0; } } /* * If this is segment 0, the bus is zero, and PCI bus 0 already * exists, read the bus number via PCI config space. */ busok = 1; if (sc->ap_segment == 0 && sc->ap_bus == 0 && bus0_seen) { busok = 0; status = acpi_GetInteger(sc->ap_handle, "_ADR", &addr); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { device_printf(dev, "could not evaluate _ADR - %s\n", AcpiFormatException(status)); return_VALUE (ENXIO); } else device_printf(dev, "couldn't find _ADR\n"); } else { /* XXX: We assume bus 0. */ slot = ACPI_ADR_PCI_SLOT(addr); func = ACPI_ADR_PCI_FUNC(addr); if (bootverbose) device_printf(dev, "reading config registers from 0:%d:%d\n", slot, func); if (host_pcib_get_busno(pci_cfgregread, 0, slot, func, &busno) == 0) device_printf(dev, "couldn't read bus number from cfg space\n"); else { sc->ap_bus = busno; busok = 1; } } } /* * If nothing else worked, hope that ACPI at least lays out the * host-PCI bridges in order and that as a result our unit number * is actually our bus number. There are several reasons this * might not be true. */ if (busok == 0) { sc->ap_bus = device_get_unit(dev); device_printf(dev, "trying bus number %d\n", sc->ap_bus); } /* If this is bus 0 on segment 0, note that it has been seen already. */ if (sc->ap_segment == 0 && sc->ap_bus == 0) bus0_seen = 1; return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_bus)); } static int acpi_pcib_acpi_resume(device_t dev) { return (acpi_pcib_resume(dev)); } /* * Support for standard PCI bridge ivars. */ static int acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct acpi_hpcib_softc *sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_DOMAIN: *result = sc->ap_segment; return (0); case PCIB_IVAR_BUS: *result = sc->ap_bus; return (0); case ACPI_IVAR_HANDLE: *result = (uintptr_t)sc->ap_handle; return (0); case ACPI_IVAR_FLAGS: *result = (uintptr_t)sc->ap_flags; return (0); } return (ENOENT); } static int acpi_pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) { struct acpi_hpcib_softc *sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_DOMAIN: return (EINVAL); case PCIB_IVAR_BUS: sc->ap_bus = value; return (0); case ACPI_IVAR_HANDLE: sc->ap_handle = (ACPI_HANDLE)value; return (0); case ACPI_IVAR_FLAGS: sc->ap_flags = (int)value; return (0); } return (ENOENT); } static uint32_t acpi_pcib_read_config(device_t dev, int bus, int slot, int func, int reg, int bytes) { return (pci_cfgregread(bus, slot, func, reg, bytes)); } static void acpi_pcib_write_config(device_t dev, int bus, int slot, int func, int reg, uint32_t data, int bytes) { pci_cfgregwrite(bus, slot, func, reg, data, bytes); } static int acpi_pcib_acpi_route_interrupt(device_t pcib, device_t dev, int pin) { struct acpi_hpcib_softc *sc = device_get_softc(pcib); return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt)); } static int acpi_pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs, int cpuid) { device_t bus; bus = device_get_parent(pcib); return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount, irqs, cpuid)); } static int acpi_pcib_alloc_msix(device_t pcib, device_t dev, int *irq, int cpuid) { device_t bus; bus = device_get_parent(pcib); return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq, cpuid)); } static int acpi_pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data, int cpuid) { device_t bus; bus = device_get_parent(pcib); return (PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data, cpuid)); } static u_long acpi_host_mem_start = 0x80000000; TUNABLE_ULONG("hw.acpi.host_mem_start", &acpi_host_mem_start); static struct resource * acpi_pcib_acpi_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags, int cpuid) { /* * If no memory preference is given, use upper 32MB slot most * bioses use for their memory window. Typically other bridges * before us get in the way to assert their preferences on memory. * Hardcoding like this sucks, so a more MD/MI way needs to be * found to do it. This is typically only used on older laptops * that don't have pci busses behind pci bridge, so assuming > 32MB * is likely OK. * * PCI-PCI bridges may allocate smaller ranges for their windows, * but the heuristics here should apply to those, so we allow * several different end addresses. */ if (type == SYS_RES_MEMORY && start == 0UL && (end == ~0UL || end == 0xffffffff)) start = acpi_host_mem_start; if (type == SYS_RES_IOPORT && start == 0UL && (end == ~0UL || end == 0xffff || end == 0xffffffff)) start = 0x1000; return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags, cpuid)); }