Joris Giovannangeli [Tue, 10 Jun 2014 12:08:24 +0000 (14:08 +0200)]
ips: initialize local variables
found-with: clang
Joris Giovannangeli [Tue, 10 Jun 2014 11:53:07 +0000 (13:53 +0200)]
kernel: fix an invalid self assignment in linker
found-with: clang
Sascha Wildner [Tue, 10 Jun 2014 09:58:22 +0000 (11:58 +0200)]
kernel: Add some more missing crit_exit(), rel_mplock(), etc.
Sascha Wildner [Mon, 9 Jun 2014 21:32:42 +0000 (23:32 +0200)]
unlock_return.cocci: Add a nlookup_init()/done() test (which we pass).
Sascha Wildner [Mon, 9 Jun 2014 20:46:48 +0000 (22:46 +0200)]
kernel/hammer2: Add two missing lockmgr(..., LK_RELEASE).
Imre Vadasz [Mon, 9 Jun 2014 20:36:22 +0000 (22:36 +0200)]
kernel/bwn: Improve error handling in bwn_attach().
* Making sure to call wlan_serialize_exit() when bus_setup_intr() fails.
* Return the proper error values when bwn_attach() fails.
Sascha Wildner [Mon, 9 Jun 2014 20:32:13 +0000 (22:32 +0200)]
unlock_return.cocci: Add vn_unlock() and wlan_serialize_exit() tests.
Sascha Wildner [Mon, 9 Jun 2014 20:22:50 +0000 (22:22 +0200)]
kernel/iwn: Add a missing wlan_serialize_exit().
Sascha Wildner [Sun, 8 Jun 2014 12:42:06 +0000 (14:42 +0200)]
kernel: Add a missing vn_unlock().
Matthew Dillon [Mon, 9 Jun 2014 17:57:23 +0000 (10:57 -0700)]
hammer - Fix wild free() in 'hammer info' path
* Fix a wild free that could cause the program to assert.
Reported-by: shamaz
François Tigeot [Mon, 9 Jun 2014 10:17:39 +0000 (12:17 +0200)]
drm/i915: More initialization code from Linux
François Tigeot [Mon, 9 Jun 2014 08:38:11 +0000 (10:38 +0200)]
drm/i915: drm_i915_private_t changed
François Tigeot [Sun, 8 Jun 2014 21:14:56 +0000 (23:14 +0200)]
drm/i915: Fix unresponsive X server issues
* In some circumstances, the drm/i915 driver slept on irq_lock with no
timeout and never woke up, causing the X server to become unresponsive
* It turns the absence of timeout came from the original FreeBSD version
of this driver; Linux uses a 1 second timeout by default
* Add the same 1-second timeout to the culprit function calls, hopefully
fixing this issue for good
François Tigeot [Sun, 8 Jun 2014 21:13:30 +0000 (23:13 +0200)]
drm/i915: Partial sync of the ring handling code...
... with Linux 3.8.13
A few parts obtained from OpenBSD
François Tigeot [Sun, 8 Jun 2014 21:12:19 +0000 (23:12 +0200)]
drm/i915: Reduce differences with Linux 3.8.13
Joris Giovannangeli [Sun, 8 Jun 2014 10:48:15 +0000 (12:48 +0200)]
kernel disk/vn: fix locking in vnstrategy
François Tigeot [Sun, 8 Jun 2014 09:45:34 +0000 (11:45 +0200)]
ipv6: Silence src xxx is not link-local messages
They pollute logs in situations where users have no control
over traffic being transmitted on the local network.
Sascha Wildner [Sun, 8 Jun 2014 09:44:48 +0000 (11:44 +0200)]
Improve our unlock_return.cocci (now finds much more candidates).
Unfortunately, the number of false positives goes up proportionally,
so careful review and re-review of the results is advised.
Sascha Wildner [Sun, 8 Jun 2014 09:32:23 +0000 (11:32 +0200)]
kernel: Add a number of missing crit_exit, lwkt_reltoken, rel_mplock, etc.
Sascha Wildner [Sun, 8 Jun 2014 08:50:56 +0000 (10:50 +0200)]
kernel: Build modules with -Werror too.
Sascha Wildner [Sun, 8 Jun 2014 08:49:27 +0000 (10:49 +0200)]
Move ed(4), sr(4), and ng_sync_{ar,sr} to being i386 only.
If someone needs them on x86_64, they will first have to fix the various
int <-> pointer conversions which they warn about.
François Tigeot [Sun, 8 Jun 2014 08:35:25 +0000 (10:35 +0200)]
initrd: Create a bin/scp link
Imre Vadasz [Sat, 7 Jun 2014 19:45:17 +0000 (21:45 +0200)]
Convert files to UTF-8
Taken-from: FreeBSD
Joris Giovannangeli [Sun, 8 Jun 2014 00:37:55 +0000 (02:37 +0200)]
patch: use size_t for line len.
* allow file with lines longer than sizeof(short)
Submitted-by: tautolog
Joris Giovannangeli [Sat, 7 Jun 2014 18:08:57 +0000 (20:08 +0200)]
kern/dsched: remove leftover code
* The found variable has been replaced in
12cdc371fb859682eda7d1c26c5059920a7cf118
and leftover assertion lead to a panic.
Joris Giovannangeli [Sat, 7 Jun 2014 17:56:54 +0000 (19:56 +0200)]
kernel/dsched: add a missing LK_RELEASE
Peter Avalos [Sat, 7 Jun 2014 16:25:39 +0000 (09:25 -0700)]
Merge branch 'vendor/TNFTP'
Peter Avalos [Sat, 7 Jun 2014 16:15:09 +0000 (09:15 -0700)]
Sync ftp with NetBSD.
* Fix timeout on http fetches.
* Let progressmeter deal with a timeout.
Obtained-from: NetBSD
Sepherosa Ziehau [Sat, 7 Jun 2014 13:17:08 +0000 (21:17 +0800)]
udp: Dispatch UDP datagrams to the correct netisr to perform ip_output()
Redispatch UDP datagrams to the netisr, whose owner CPU matches the
UDP datagrams hash, to do the ip_output(). As measured bt KTR, the
udp_send() spends most of its time in ip_output().
To properly support this, following stuffs are added/changed:
- Add a network private lwkt message flag to indicate the so_port of
the netmsg should not be matched against the current netisr's msgport.
This flag is set when we redispatch the UDP datagrams to other netisrs.
- Don't use priority messages for netisr barrier, so at UDP socket close
time, UDP datagrams pending on other netisr msgport could be properly
sync'ed.
The UDP datagrams redispatch itself:
- If IP options are ever configured (supposely none), a copy of it will
be carried along w/ the UDP datagram to the target netisr. The copy
is made mainly because it is not safe to access the IP options of the
inpcb in netisr which does not own the inpcb.
(*) On the other hand accessing inpcb's multicast options is safe since
multicast UDP datagrams output and multicast options configuration all
happen in netisr0.
- Add nm_priv into netmsg_pru_send, which saves flags to be passed to
ip_output() for the UDP datagram. This does not changes the size of
netmsg_pru_send on x86_64 due to the implicit 4bytes padding.
- udp_addrcpu_pkt() is added to calculate the "real" CPU for the UDP
datagrams.
- Don't use inpcb route cache for redispatched UDP datagrams. Since:
o The cached route is usually not for the UDP datagrams' destination.
o Accessing inpcb route cache in the netisr, which is not the owner
of the inpcb is not safe.
On i7-3770 w/ 82599ES, this increases 18bytes UDP request/response
performance by ~19% (1.12M trasactions/s ---> 1.34M transactions/s)
This commit also makes lockless firewall state table doable, since input
and output of UDP datagrams, which have same hash, are running in the
same netisr now!
Sepherosa Ziehau [Sat, 7 Jun 2014 12:40:01 +0000 (20:40 +0800)]
tools/udpecho: Tool to test UDP request/response rate
Markus Pfeiffer [Fri, 6 Jun 2014 20:01:26 +0000 (21:01 +0100)]
locking.9: more editing
Markus Pfeiffer [Fri, 6 Jun 2014 19:57:46 +0000 (20:57 +0100)]
locking.9: more updates
Markus Pfeiffer [Fri, 6 Jun 2014 18:23:52 +0000 (19:23 +0100)]
locking.9 updates
Markus Pfeiffer [Thu, 5 Jun 2014 21:22:27 +0000 (22:22 +0100)]
man: Add locking(9) manpage about locking and synchronisation
Sascha Wildner [Fri, 6 Jun 2014 15:57:17 +0000 (17:57 +0200)]
openssl: Adjust manual pages for 1.0.1h.
Sascha Wildner [Fri, 6 Jun 2014 15:51:29 +0000 (17:51 +0200)]
Merge branch 'vendor/OPENSSL'
Sascha Wildner [Fri, 6 Jun 2014 15:48:23 +0000 (17:48 +0200)]
Import OpenSSL-1.0.1h.
* Fixes for CVE-2014-0224, CVE-2014-0221, CVE-2014-0195, CVE-2014-3470
* Harmonize version and its documentation
* Fix eckey_priv_encode so it immediately returns an error upon a
failure in i2d_ECPrivateKey
* Fix some double frees. These are not thought to be exploitable.
See also http://www.openssl.org/news/secadv_20140605.txt
Submitted-by: Robin Hahling <robin.hahling@gw-computing.net>
Sepherosa Ziehau [Fri, 6 Jun 2014 12:47:59 +0000 (20:47 +0800)]
pktgen: Allow switching dst and src addresses configuration
So it could simulate multiple clients and one target server use case.
Sascha Wildner [Fri, 6 Jun 2014 02:28:18 +0000 (04:28 +0200)]
bsd-family-tree: Sync with FreeBSD (for OpenBSD 5.5 and DragonFly 3.8.0).
Joris Giovannangeli [Thu, 5 Jun 2014 13:34:12 +0000 (15:34 +0200)]
libfetch: sync with freebsd
Sascha Wildner [Thu, 5 Jun 2014 08:32:33 +0000 (10:32 +0200)]
hostapd.conf.5: Add back Mt for email addresses.
Joris Giovannangeli [Wed, 4 Jun 2014 13:48:38 +0000 (15:48 +0200)]
libthread_xu: add support for named POSIX semaphores.
* this implementation uses files as rendezvous and simply map files
into the process address space. It means one page per semaphore.
* by default, semaphores are created in /tmp/sem. If the
LIBTHREAD_SEM_PREFIX environment variable is defined, its value is
used as prefix.
Robert Garrett [Wed, 4 Jun 2014 13:44:02 +0000 (15:44 +0200)]
PER FREEBSD-SA-14:13 Incorrect error handling in PAM policy parser
This is the original patch submitted to FreeBSD
by as far as I can tell Peter Wemm, and Dag-Erling Smorgrav
Testing: Robert Garrett
Sepherosa Ziehau [Wed, 4 Jun 2014 08:38:16 +0000 (16:38 +0800)]
udp: Wait for address memory
It's better than wait for the current message to be done, since there
could be piles of messages on the target msgport. This Improves UDP
sending performance a little bit.
Sascha Wildner [Tue, 3 Jun 2014 13:29:50 +0000 (15:29 +0200)]
wpa_supplicant/hostapd: Fix a number of manual page issues.
* If there were no content related change on a manual page, leave .Dd
as it is. If there were content related change, change it to the date
when it was changed in our tree, not when it was changed in FreeBSD
or elsewhere.
* Comment out a number of references to manual pages which we don't
have because the drivers have not yet been ported.
* Add .Mt back to email addresses.
* .Fx -> .Dx
* Typo fix.
Markus Pfeiffer [Tue, 3 Jun 2014 09:43:59 +0000 (10:43 +0100)]
usb4bsd: change if_run to use usb_pause_ls
Markus Pfeiffer [Tue, 3 Jun 2014 09:15:32 +0000 (10:15 +0100)]
usb4bsd: implement pause function with lock and serializer
Franco Fichtner [Mon, 2 Jun 2014 20:03:04 +0000 (22:03 +0200)]
mandoc: bump DragonFly version number
Franco Fichtner [Mon, 2 Jun 2014 19:59:29 +0000 (21:59 +0200)]
service: vanilla import of /etc/rc.d/xxx wrapper
Taken-from: FreeBSD
Sascha Wildner [Mon, 2 Jun 2014 18:07:33 +0000 (20:07 +0200)]
kernel/xdisk: Move the dereference of 'tag' below the NULL check.
Johannes Hofmann [Sun, 1 Jun 2014 18:46:39 +0000 (20:46 +0200)]
kernel/iwn: Fix panic on kldunload
Sascha Wildner [Sun, 1 Jun 2014 14:06:11 +0000 (16:06 +0200)]
kernel/acpi: Make interpreter slack mode a tunable.
Taken-from: FreeBSD
Peeter [Wed, 7 May 2014 03:17:25 +0000 (12:17 +0900)]
pflogd: Make pflogd recognize previous logfile
* scan_dump() must use pcap_sf_pkthdr instead of pcap_pkthdr
* other minor changes to make pdflogd more similar to the FreeBSD version
Changes obtained from FreeBSD
Sascha Wildner [Fri, 30 May 2014 17:05:04 +0000 (19:05 +0200)]
acpica: Add a Makefile for the 'aapits' utility (part of the ACPICA tests).
It is not hooked into the build and remains unhooked and serves just to
make setting up the tests easier.
Sascha Wildner [Fri, 30 May 2014 16:56:24 +0000 (18:56 +0200)]
kernel/acpi: Remove some empty code.
Markus Pfeiffer [Thu, 29 May 2014 20:51:07 +0000 (21:51 +0100)]
kernel/npx: add process name to error message
Sascha Wildner [Thu, 29 May 2014 18:21:03 +0000 (20:21 +0200)]
nrelease: Verify that $DPORTS_TREE indeed exists as a directory.
Also, if it exists, output its name so it can be looked up in the
logfile (in case there might have been a typo when overriding the
default).
Sascha Wildner [Thu, 29 May 2014 16:46:50 +0000 (18:46 +0200)]
kernel/acpi: Sync acpi_video with FreeBSD.
* Add LCD brightness control notify handler.
* Add support for "cycle" and "zero" events for LCD brightness control.
* Fix recognition of video outputs that use the standardized device
ID scheme in ACPI 3.0 and set bit 31 at the same time (such as certain
Dell laptops).
François Tigeot [Thu, 29 May 2014 10:01:31 +0000 (12:01 +0200)]
drm/i915: New IRQ management code from Linux
* Move some functions around, they were defined in different files
than in Linux
* Add some Haswell and Valleyview support code
* Generally reduce differences with Linux 3.8.13
Sascha Wildner [Thu, 29 May 2014 06:26:47 +0000 (08:26 +0200)]
installer: Fix disk_find() on systems that have both da1 and da10.
In addition to comparing names (up to the length of the disk which
was found previously), also compare name lengths.
While here, remove the disk_find() check in disk_new(). disk_new()
didn't deal with it returning NULL. But because the list of disks
we offer as targets for installing is taken from sysctl kern.disks'
output, it will not have duplicates (else it would likely be a bug
in the kernel).
Reported-by: BSDUX on IRC
Imre Vadasz [Wed, 28 May 2014 20:07:11 +0000 (22:07 +0200)]
top: Fix the interactive command 'U'.
* The gstate->header_text and gstate->get_userid variables need to be
updated when toggling between displaying of UIDs and usernames.
* Removing the unnecessary HAVE_FORMAT_PROCESS_HEADER checks.
John Marino [Wed, 28 May 2014 16:26:52 +0000 (18:26 +0200)]
top: Fix -Sc option combination (bug #2670)
It was reported that the "top -S" and "top -c" commands work as expected
but "top -Sc" showed repeated lines. I confirmed a malfunction, but a
different one: all 20 lines showing in console were the same.
The following patch will revert to standard format if a system command is
detected, otherwise the desired "full command" option is shown.
< http://bugs.dragonflybsd.org/issues/2670 >
John Marino [Wed, 28 May 2014 11:31:47 +0000 (13:31 +0200)]
WPA Supplicant version upgrade complete: 0.6.10 => 2.1
This is step 4 of 4 of the process to upgrade WPA Supplicant and HostAPD
from version 0.6.10 (Dec 2010) to version 2.1 (Feb 2014).
- Added hostapd.conf and wpa_supplicant.conf to etc
- updated share/initrd/etc/wpa_supplicant.conf with the vendor
version,
- minors man fixes taken from FreeBSD head,
- major Makefile overhaul in usr.sbin/802_11 based on FreeBSD head,
- use the vendor's driver_wired and driver_bsd,
- l2_packet.c is a copy of the vendor's l2_packet/l2_packet_freebsd.
All significant work contributed by: Alexandre Perrin <alex@kaworu.ch>
Thanks!
John Marino [Wed, 28 May 2014 11:22:00 +0000 (13:22 +0200)]
WPA Supplicant upgrade: Add local modifications and READMEs
Both vendor sources only need modification on a single file: wps_upnp.c
This is step 3 of 4 of the upgrade.
John Marino [Wed, 28 May 2014 15:24:05 +0000 (17:24 +0200)]
Merge branch 'vendor/WPA_SUPPLICANT'
Internally conflicted, use vendor/WPA_SUPPLICANT in all cases.
John Marino [Wed, 28 May 2014 15:21:37 +0000 (17:21 +0200)]
Merge branch 'vendor/HOSTAPD'
Internally conflicted, use vendor/HOSTAPD in all cases
John Marino [Wed, 28 May 2014 10:50:04 +0000 (12:50 +0200)]
Removed copies of hostapd/wpa to prepare for branch merge
The contrib directories for hostapd and wpa_supplicant were just
copies of their respective vendor branches. They were never merged
into the master branch.
To prepare for their first merging, let's remove the existing copies of
these two contrib subdirectories completely to avoid conflicts.
This is the first of four steps to update WPA Supplicant in base.
Step 2: Merge in hostapd and wpa_supplicant vendor branches (ver 2.1)
Step 3: Add local modifications to hostapd and wpa_supplicant
Step 4: Update makefile and conf files accordingly
John Marino [Tue, 27 May 2014 21:43:58 +0000 (23:43 +0200)]
wpa_supplicant vendor branch: Update version 0.6.10 => 2.1
John Marino [Tue, 27 May 2014 19:42:16 +0000 (21:42 +0200)]
hostapd vendor branch: Update version from 0.6.10 => 2.1
Sepherosa Ziehau [Wed, 28 May 2014 12:45:25 +0000 (20:45 +0800)]
udp: Merge udp_send and udp_output
This paves way for the udp packet redispatch to distribute ip_output
workload.
Sepherosa Ziehau [Sun, 25 May 2014 12:30:15 +0000 (20:30 +0800)]
udp: Remove no longer necessary code
François Tigeot [Tue, 27 May 2014 08:36:25 +0000 (10:36 +0200)]
drm: Change the prototype of fb_create()
Make it identical to the Linux 3.8.13 version.
François Tigeot [Mon, 26 May 2014 19:08:39 +0000 (21:08 +0200)]
Linux headers: Improve the WARN_ON() macro
Obtained-from: OpenBSD
Sascha Wildner [Mon, 26 May 2014 17:21:18 +0000 (19:21 +0200)]
newvers.sh: Adjust revision.
Reported-by: luxh
Sascha Wildner [Mon, 26 May 2014 08:11:15 +0000 (10:11 +0200)]
kernel/acpi: Remove some unneeded code in acpi_hp.
Justin C. Sherrill [Mon, 26 May 2014 04:52:17 +0000 (00:52 -0400)]
3.9-DEVELOPMENT, a.k.a. master
Sascha Wildner [Sun, 25 May 2014 12:02:21 +0000 (14:02 +0200)]
kernel/ig_hal: Add missing braces.
In-discussion-with: sephe
Sascha Wildner [Sun, 25 May 2014 08:38:41 +0000 (10:38 +0200)]
kernel: Fix various indentation issues (no functional change).
Sascha Wildner [Sun, 25 May 2014 07:59:46 +0000 (09:59 +0200)]
kernel/acpi: Use standard types.
Sascha Wildner [Sun, 25 May 2014 07:17:32 +0000 (09:17 +0200)]
kernel/acpi: Fix indent, also use NULL for pointers (no functional change).
Sascha Wildner [Sat, 24 May 2014 21:27:39 +0000 (23:27 +0200)]
acpi.4: Sort hpet.
Sascha Wildner [Sat, 24 May 2014 21:27:02 +0000 (23:27 +0200)]
acpi_dock.4: Add Mt
Sascha Wildner [Sat, 24 May 2014 21:24:38 +0000 (23:24 +0200)]
kernel/acpi: Add a docking station driver.
Tested-by: profmakx (on a ThinkPad X230)
Taken-from: FreeBSD
Sascha Wildner [Fri, 23 May 2014 11:59:50 +0000 (13:59 +0200)]
acpixtract.8: Add missing Fl
Sascha Wildner [Thu, 22 May 2014 07:58:15 +0000 (09:58 +0200)]
acpi.4: Add missing space.
Sascha Wildner [Wed, 21 May 2014 19:35:57 +0000 (21:35 +0200)]
s/NO_OBJ/NOOBJ/ in a few Makefiles.
Sascha Wildner [Wed, 21 May 2014 19:11:54 +0000 (21:11 +0200)]
libc: Fix strcasecmp_l() and strncasecmp_l() issues.
POSIX.1-2008 specifies that those two functions should be declared by
including <strings.h>, not <string.h> (the latter only has strcoll_l()
and strxfrm_l()):
http://pubs.opengroup.org/onlinepubs/
9699919799/functions/strcasecmp.html
It looks like FreeBSD got this wrong in their xlocale stuff originally.
And it looks like the only clean way to properly solve it is to split
<xlocale/_string.h> into <xlocale/_string.h> and <xlocale/_strings.h>,
which this commit does.
Sepherosa Ziehau [Wed, 21 May 2014 12:44:59 +0000 (20:44 +0800)]
udp: Add KTR to measure UDP packet creation and ip_output cost
Sascha Wildner [Wed, 21 May 2014 06:53:38 +0000 (08:53 +0200)]
loader: Remove some unused code.
Sascha Wildner [Wed, 21 May 2014 06:53:12 +0000 (08:53 +0200)]
kernel: Remove some unused code.
Matthew Dillon [Wed, 21 May 2014 01:42:20 +0000 (18:42 -0700)]
groff - horrible hack to fix .gz issues
* If a gzipped manual page contains a .so forwarding entry, groff
will attempt to open the forwarding entry directly and will not
check to see if a file with a .gz extension is present, resulting
in an open error.
* Hack hack hack. Horrible hack of the input search path to check
for a .gz extension and popen() the file with zcat. Horrible because
I haven't bothered to modify all the other myrid code to properly call
pclose() instead of fclose() in that case.
Sepherosa Ziehau [Wed, 21 May 2014 01:21:06 +0000 (09:21 +0800)]
ifnet: Remove marker from if_multiaddrs, once iteration is done
Reported-by: tuxillo@
Sascha Wildner [Tue, 20 May 2014 19:55:52 +0000 (21:55 +0200)]
kernel/acpi: Improve the disabling of Debug object output.
It is actually a global in ACPICA (since
20100304) so add a new
sysctl debug.acpi.enable_debug_objects that can be used to toggle
it, with the default being 0.
Unlike the previous attempt (which I had to revert again), this
time also clear ACPI_LV_DEBUG_OBJECT in the AcpiDbgLevel global in
case ACPI_DEBUG is not defined. My assumption that ACPICA would
initialize AcpiDbgLevel to 0 was wrong. It really is initialized
to ACPI_NORMAL_DEFAULT. It is kind of weird that
ACPI_NORMAL_DEFAULT == ACPI_DEBUG_DEFAULT in acoutput.h, but FWIW,
leave the other bits in AcpiDbgLevel set for now.
This commit reverts (again) a previous commit by sephe which solved
it differently (in the ACPICA code).
Taken-from: FreeBSD (with modification by me)
Dragonfly-bug: <http://bugs.dragonflybsd.org/issues/2672>
Sascha Wildner [Tue, 20 May 2014 17:57:49 +0000 (19:57 +0200)]
acpica: Use only one #ifdef _KERNEL ... and use 'inline' directly.
Sascha Wildner [Tue, 20 May 2014 04:17:05 +0000 (06:17 +0200)]
kernel/acpi: Fix memory and port I/O functions in the OS services layer.
This makes AcpiOsReadPort(), AcpiOsWritePort(), AcpiOsReadMemory()
and AcpiOsWriteMemory() match the behavior requested in the "ACPI
User Guide and Programmer Reference".
When the width of the location that is read from or written to is less
than the (return) value's width, the read functions must ensure the
rest of the bits are zero and the write functions must write no more
than the location's width.
This should fix at least a number of temperature reading issues we
were seeing, such as the messages we were getting lately:
acpi_tz0: _TMP value is absurd, ignored (-204.0C)
acpi_tz0: _TMP value is absurd, ignored (-204.0C)
acpi_tz0: _TMP value is absurd, ignored (-203.0C)
Found-in: FreeBSD
Sascha Wildner [Tue, 20 May 2014 01:47:22 +0000 (03:47 +0200)]
kernel/acpi: Remove an Itanium define.
Sepherosa Ziehau [Mon, 19 May 2014 12:46:01 +0000 (20:46 +0800)]
in_pcbladdr: Break long line; no functional changes
Sepherosa Ziehau [Mon, 19 May 2014 11:45:31 +0000 (19:45 +0800)]
inet: Return NULL from IN_LOOKUP_MULTI if ifnet is NULL
This could happen for mbufs on ip_input path, whose rcvif could be NULL.
Sepherosa Ziehau [Mon, 19 May 2014 11:37:16 +0000 (19:37 +0800)]
ip_input: Only multicast forwarding may be not MPSAFE
Sepherosa Ziehau [Mon, 19 May 2014 11:37:01 +0000 (19:37 +0800)]
ip_output: if_simloop is MPSAFE