Matthew Dillon [Tue, 22 Nov 2016 23:12:34 +0000 (15:12 -0800)]
efi - Add EFI run-time ABI support (2)
* Files forgotten in last commit. Fix ABI (microsoft call ABI is used
for EFI direct calls).
Matthew Dillon [Tue, 22 Nov 2016 22:53:50 +0000 (14:53 -0800)]
efi - Add EFI run-time ABI support
* Add EFI run-time ABI support, ability to query and set the time,
scan EFI BIOS variables, etc.
* Port from FreeBSD. Use our vmspace management functions to handle
the specialized pmap requirements instead of rerolling the page
table. Make adjustments for differences in the device API. etc.
Ported-by: swildner, dillon
Ported-from: FreeBSD, Warner Losh
Tomohiro Kusumi [Tue, 22 Nov 2016 14:50:01 +0000 (23:50 +0900)]
sys/dev/disk/dm: Sync with Linux changes in flakey read behavior
Synw with the following Linux kernel commits.
99f3c90d0d85708e7401a81ce3314e50bf7f2819
299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc
Note that above commits and this commit change read behavior.
It seems the existing read behavior was not what dm-flakey was
originally designed to be.
DragonFly's dm-flakey basically just does what Linux dm-flakey
does, so this commit just syncs with above changes.
Sepherosa Ziehau [Tue, 22 Nov 2016 02:57:13 +0000 (10:57 +0800)]
udp: Don't propagate connect error, as long as the inpcb has local port.
This fixes the UDP socket disconnect->[read/write] support; before this
fix, the immediate read/write after disconnect will get EAFNOTSUPPORT.
Sepherosa Ziehau [Tue, 22 Nov 2016 02:56:22 +0000 (10:56 +0800)]
test/udp: Add echo test for connected->disconnected socket.
zrj [Mon, 21 Nov 2016 14:24:01 +0000 (16:24 +0200)]
gcc50: Activate workaround for libgcc_pic.a.
For now to ease up dports compilations (affects only c++ -pthread -shared).
In-discussion-with: marino
zrj [Mon, 21 Nov 2016 11:14:08 +0000 (13:14 +0200)]
svc(8): Link as static.
Depends on libpthread.so that is in /usr/lib and symlink.
Avoids problems on split / and /usr layout installations.
zrj [Mon, 21 Nov 2016 11:28:20 +0000 (13:28 +0200)]
libsmb: Install .so.2 into /lib to unbreak mount_smbfs(8).
Fixes issue for /sbin/mount_smbfs on split / and /usr layout installations.
zrj [Mon, 21 Nov 2016 11:17:15 +0000 (13:17 +0200)]
libdevstat: Install .so.3 into /lib to unbreak vinum(8).
Fixes issue for /sbin/vinum on split / and /usr layout installations.
Reported-by: Stefan Unterweger
Imre Vadász [Tue, 15 Nov 2016 23:34:04 +0000 (00:34 +0100)]
drm: Use struct fb_info * as arg for syscons fb restore helper function.
* This makes the framebuffer api handling in drm slightly nicer, and
reduces the diffs in drm/radeonkms/i915 a bit.
* Renames the cookie element in struct fb_info to par, to avoid diffs
in drm, radeonkms and i915.
* While there, use drm_fb_helper_alloc_fbi() in drm/radeon as well for
allocating the struct fb_info, and uncomment drm_fb_helper_release_fbi(),
which is needed in an error handler there.
Sascha Wildner [Sat, 19 Nov 2016 11:19:09 +0000 (12:19 +0100)]
Remove /usr/include/readline from mtree too.
Sascha Wildner [Sat, 19 Nov 2016 10:09:06 +0000 (11:09 +0100)]
i386 removal, part 61/x: Adjust some further #ifdefs.
Sascha Wildner [Sat, 19 Nov 2016 09:41:08 +0000 (10:41 +0100)]
i386 removal, part 60/x: Generalize a buildkernel error message a bit.
Pointed-out-by: zrj
Sascha Wildner [Sat, 19 Nov 2016 09:38:44 +0000 (10:38 +0100)]
i386 removal, part 59/x: Revert a i386 specific local change in dma(8).
Sascha Wildner [Sat, 19 Nov 2016 09:34:53 +0000 (10:34 +0100)]
Remove some old architecture handling.
Affected #ifdefs:
__arm__
hp300
__ia64__
__mips__
__powerpc__
__sparc64__
Sascha Wildner [Sat, 19 Nov 2016 09:08:12 +0000 (10:08 +0100)]
i386 removal, part 58/x: Remove <sys/link_aout.h>.
Its last user was removed in
aeaecd482b46e655e59bf281f04e91d0bb4f773b.
Matthew Dillon [Sat, 19 Nov 2016 05:55:50 +0000 (21:55 -0800)]
drm - Fix lock order reversal
* Lock order reversal caused by holding dev_pager_mtx() across
the object->un_pager.devp.ops->cdev_pg_dtor() call. devpgr -> drmslk.
* Move the lock from before to after the call. Holding the mutex shouldn't
be necessary across the call. This also fixes the reversal as devpgr is
no longer held across the call.
* Fixes a lock order reversal against drm_ioctl() which obtains drmslk first
and recurses into a device pager operation which gets devpgr.
* Fix a few other incidental bugs that would normally not be triggered by
the DRM code due to outer locks held by the DRM code. Plus some formatting
fixes.
Matthew Dillon [Fri, 18 Nov 2016 23:24:45 +0000 (15:24 -0800)]
kernel - Fix swap warning message when swap is full
* Wrong variable tested caused confusing warning to be output. Output
swap full warning instead of 'no swap space configured' warning when
swap is full and swap space has been configured.
Reported-by: tuxillo
zrj [Fri, 18 Nov 2016 17:02:10 +0000 (19:02 +0200)]
LIBPRIV: Add private includes for dfuife_curses.
installer(1) is only built during make release or WANT_INSTALLER=yes.
John Marino [Thu, 17 Nov 2016 20:46:24 +0000 (14:46 -0600)]
Relocate readline and ncurses headers to /usr/include/priv
Having public headers for private libraries can cause confusion for
software that assumes the presence of headers leads to the availability
of the libraries.
Discussed-with: dillon
Tomohiro Kusumi [Fri, 18 Nov 2016 08:40:27 +0000 (17:40 +0900)]
sys/vfs/hammer: Fix wrong comment
7f1e2b68 should have had 4TB, not 4GB.
Imre Vadász [Thu, 17 Nov 2016 22:06:29 +0000 (23:06 +0100)]
wlan - Don't check bgscanidle setting in net80211 for full-offload scan.
* If full-offload scan is used, the NIC driver (or rather the firmware of
the NIC) should take care of interrupting and continuing the background
scan. So net80211 should ignore the vap->iv_bgscanidle setting then,
instead the NIC driver might look at this setting and pass it on to the
firmware in some way if possible.
* Since full-offload scans won't be explicitly interrupted by net80211, it
also doesn't really make sense to check the vap->iv_bgscanidle condition
in that case, before starting a background scan. If the NIC driver
advertises background scan support and full-offload scanning, the firmware
should be able to execute that scan without interfering too much with our
data traffic.
Taken-From: FreeBSD (svn r308785)
zrj [Thu, 17 Nov 2016 18:40:57 +0000 (20:40 +0200)]
drm/linux: add sg_pcopy_{from/to}_buffer()
Needed for i915 guc fw loading.
Found on github implemented by mattmacy@ FreeBSD repo
François Tigeot [Thu, 17 Nov 2016 16:39:10 +0000 (17:39 +0100)]
drm/linux: Add ida_simple_get()
Inspired-by: NetBSD
zrj [Thu, 17 Nov 2016 16:05:38 +0000 (17:05 +0100)]
drm/linux: add few ida_* functions.
Needed for i915 guc submission.
zRJ-note: technically should be in idr(9) but for now will do.
Found on github implemented by mattmacy@ FreeBSD repo
François Tigeot [Tue, 15 Nov 2016 20:38:53 +0000 (21:38 +0100)]
drm/linux: Add cache_line_size()
zrj [Tue, 15 Nov 2016 19:19:33 +0000 (20:19 +0100)]
drm/linux: add atomic64_cmpxchg()
Found on github implemented by mattmacy@ FreeBSD repo
François Tigeot [Tue, 15 Nov 2016 16:16:37 +0000 (17:16 +0100)]
drm/i915/trace: Add missing include files
François Tigeot [Tue, 15 Nov 2016 16:12:59 +0000 (17:12 +0100)]
drm/linux: MODULE_FIRMWARE is defined in linux/module.h
zrj [Tue, 15 Nov 2016 12:08:26 +0000 (13:08 +0100)]
drm/linux: implement div64_u64_rem() helper in math64.h
Sascha Wildner [Mon, 14 Nov 2016 17:35:02 +0000 (18:35 +0100)]
dntpd: Fix typo.
zrj [Mon, 14 Nov 2016 08:47:36 +0000 (10:47 +0200)]
gcc50: Add alternative variant of pthread presence checking.
There are few issues that ld.gold is having with DragonFly libgcc_pic.a.
This alternative variant is less strict when linking c++ projects.
zrj [Sun, 13 Nov 2016 17:52:15 +0000 (19:52 +0200)]
LINT64: Fix buildkernel with WANT_HAMMER2=yes.
Mostly #if DEBUG paths, also use panic() in z_error() for kernel.
zrj [Fri, 11 Nov 2016 12:51:43 +0000 (14:51 +0200)]
nvi: Convert catalog creation to use hostprog.
nvi dump utility is not part of btools, so just split vidump as hostprog.
There were few issues:
* build races like dump and say spanish get created twice (and raced)
* buildworld failures, from time to time i hit ./dump linking race (rare)
* ./dump being used as target program (problems on crosscompilations)
* missing env LANG=C for sort, minor issues in awk script and SHAREDIR.
Now even "cd usr.bin/vi && make -j9 depend all" should be race free.
zrj [Thu, 10 Nov 2016 18:43:24 +0000 (20:43 +0200)]
gcc47: Remove bits/ handling.
Not used by any active sources.
Now quickworld should not delete libstdcxx .depend on no source changes.
zrj [Thu, 10 Nov 2016 18:41:54 +0000 (20:41 +0200)]
gcc50: Fix logic in cxx hostlib.
Now quickworld should not delete libstdcxx .depend on no source changes.
Antonio Huete Jimenez [Thu, 10 Nov 2016 22:59:50 +0000 (23:59 +0100)]
installer - Fix a bug in survey_storage()
- survey_storage() issues DIOCGPART on every disk present in
kern.disks in order to retrieve information about it.
The problem was that a failure to get that information from
any disk in the list caused the whole storage survey to be
marked as failed. This happens, for example, with some card
readers that present the disk devices even though there is no
media inserted on the corresponding slot.
- Fix the logic in the installer and allow to check all disks
in the system.
Antonio Huete Jimenez [Thu, 10 Nov 2016 22:26:45 +0000 (23:26 +0100)]
installer - Allow to specify cmdnames file path
Imre Vadász [Sun, 13 Nov 2016 21:36:16 +0000 (22:36 +0100)]
if_iwm - Check sc->sc_attached flag in suspend/resume callbacks.
* There is (almost) nothing to do in suspend/resume if if_iwm has failed
during initialization (e.g. because of firmware load failure) and was
already uninitialized by iwm_detach_local().
Tomohiro Kusumi [Sat, 12 Nov 2016 15:45:04 +0000 (00:45 +0900)]
sys/vfs/hammer: Fix comments
Tomohiro Kusumi [Sat, 12 Nov 2016 15:44:51 +0000 (00:44 +0900)]
sys/vfs/hammer: Remove wrong comment
Tomohiro Kusumi [Sat, 12 Nov 2016 09:57:41 +0000 (18:57 +0900)]
sys/vfs/hammer: Use HAMMER_HEAD_DOALIGN()
Tomohiro Kusumi [Sat, 12 Nov 2016 09:48:50 +0000 (18:48 +0900)]
sbin/hammer: sbin/hammer: Fix hammer show-undo output format
Add some ondisk redo fields.
Tomohiro Kusumi [Sat, 12 Nov 2016 09:26:13 +0000 (18:26 +0900)]
sys/vfs/hammer: Change unused ondisk redo_mtime to reserved
It was never used after added in
6048b411 in 2010.
Imre Vadász [Sat, 12 Nov 2016 12:41:49 +0000 (13:41 +0100)]
if_iwm - Move iwm_read_firmware() call into iwm_attach().
* We should load the firmware exactly once before the driver really
initializes the hardware the first time, and unload it at detach time.
There is no need to retrieve the firmware during execution of
iwm_mvm_load_ucode_wait_alive(), we should make sure we already have the
firmware data at hand before that.
* The existing sc_preinit_hook code fails to deal with the case where
if_iwm is loaded by the loader (or is statically linked) and the
firmware needs to be loaded from disk. So we can just call
iwm_read_firmware() from iwm_attach() directly.
* A separate solution will have to be added to properly defer the firmware
loading during bootup, until the necessary filesystem is mounted.
Sascha Wildner [Sat, 12 Nov 2016 11:45:01 +0000 (12:45 +0100)]
Do
3b5eca529baf58ea74a485139963552cc4c1d977 a bit better.
FWIW, keep the NO_CRYPT dependency in lib/libcrypt for various sources.
Imre Vadász [Fri, 11 Nov 2016 20:09:05 +0000 (21:09 +0100)]
if_iwm - Attach to new AC3168 and AC8265 chipsets (untested).
Imre Vadász [Fri, 11 Nov 2016 20:08:29 +0000 (21:08 +0100)]
iwmfw - Add version 22 firmwares for AC3168 and AC8265 chipsets.
Tomohiro Kusumi [Sat, 12 Nov 2016 06:25:41 +0000 (15:25 +0900)]
sbin/hammer: Fix hammer show-undo output format
The whole size should be in %d since data size is in %d as well.
Tomohiro Kusumi [Sat, 12 Nov 2016 05:37:26 +0000 (14:37 +0900)]
sys/vfs/hammer: Add hammer_xlate_to_undo()
Tomohiro Kusumi [Sat, 12 Nov 2016 04:11:10 +0000 (13:11 +0900)]
sbin/hammer: Refactor left/right boundary elms in hammer show
hammer show doesn't need to pass around pointers to left/right
boundary elms in every function while walking the B-Tree.
Left/right elms are there to test whether a B-Tree node in
question fits in boundaries defined by its parent, which means
that hammer show always requires the right elm be (left+1), but
not some random elm after the left elm. Because of this, it
only needs to pass around the left elm.
The code is more efficient plus look better without bunch of
left/right stuff.
Tomohiro Kusumi [Fri, 11 Nov 2016 18:23:52 +0000 (03:23 +0900)]
sbin/hammer: Cleanup zone statistics
Tomohiro Kusumi [Fri, 11 Nov 2016 18:14:49 +0000 (03:14 +0900)]
sbin/hammer: Cleanup hammer show-undo
Tomohiro Kusumi [Fri, 11 Nov 2016 18:09:39 +0000 (03:09 +0900)]
sbin/hammer: Make hammer show-undo support zone statistics
Tomohiro Kusumi [Wed, 9 Nov 2016 15:56:25 +0000 (00:56 +0900)]
sys/vfs/hammer: Add HAMMER_UNDO_DOALIGN()
The only reason it's "DOALIGN" instead of just "ALIGN" is
because that's how macros have been named in HAMMER1/2.
"ALIGN" macros represent alignment size.
Tomohiro Kusumi [Wed, 9 Nov 2016 15:41:31 +0000 (00:41 +0900)]
sbin/hammer: Cleanup blockmap
François Tigeot [Fri, 11 Nov 2016 11:25:55 +0000 (12:25 +0100)]
drm/linux: Add clamp_val()
Obtained-from: FreeBSD
François Tigeot [Fri, 11 Nov 2016 11:09:29 +0000 (12:09 +0100)]
drm/linux: Add ktime_get_boottime and ktime_ms_delta()
zrj [Fri, 11 Nov 2016 07:17:44 +0000 (09:17 +0200)]
gcc50: Install liblto_plugin.so as +x.
Sad but this limitation in gcc driver requires that utility be executable.
This matches how it is done on standard installations, so follow along.
Some ports rely on gcc -print-prog-name=liblto_plugin.so working.
zrj [Fri, 11 Nov 2016 07:02:07 +0000 (09:02 +0200)]
build: Suppress exessive echoing.
zrj [Wed, 9 Nov 2016 17:14:52 +0000 (19:14 +0200)]
LIBPRIV: Add common PRIVATELIB_LDFLAGS definitions.
Simply being able to change it in two places is easier than everywhere.
Also add PRIVATELIB_BLDFLAGS that is intended for bootsrapping only.
While there, perform some cleanup for dup entries.
zrj [Wed, 9 Nov 2016 15:36:05 +0000 (17:36 +0200)]
LIBPRIV: Introduce PRIVATELIB knob (just like INTERNALLIB).
Collect common private libraries path handling bits into share/mk/bsd.lib.mk.
It is cleaner this way, prevents issues like manual paths and/or ignoring stale
.depend for /usr/obj/usr/src/world_x86_64/usr/lib/priv/priv/libprivate_ncurses.a
zrj [Wed, 9 Nov 2016 10:25:23 +0000 (12:25 +0200)]
flex: Break the hardlinks to fix quickworld issues.
Upon repeated quickworld run when install -C installs the libfl.a it breaks
the previous hardlink and retrigers relink for anything that depends on -ll.
Solve this by changing logic to install compat libs for install target only.
During buildworld only main ${LIBL} should be used where needed.
Fix a single case where -lfl was used in binutils. Add missing DPADD too.
zrj [Wed, 9 Nov 2016 10:12:41 +0000 (12:12 +0200)]
flex: Rename and install the main libl.a as primary one.
libfl and libln are only used as compat ones for external sources linkage.
Whole base makefile system uses the ${LIBL}.
Tomohiro Kusumi [Wed, 9 Nov 2016 13:06:18 +0000 (22:06 +0900)]
sys/vfs/hammer: Add HAMMER_ZONE_LAYER2_NEXT_OFFSET()
Note that this is different from HAMMER_BLOCKMAP_LAYER2_OFFSET().
HAMMER_BLOCKMAP_LAYER2_OFFSET() is an offset of layer2 entry within
a big-block for layer2, but not zone offset itself.
Tomohiro Kusumi [Wed, 9 Nov 2016 12:52:21 +0000 (21:52 +0900)]
sys/vfs/hammer: Add HAMMER_ZONE_LAYER1_NEXT_OFFSET()
Note that this is different from HAMMER_BLOCKMAP_LAYER1_OFFSET().
HAMMER_BLOCKMAP_LAYER1_OFFSET() is an offset of layer1 entry within
a big-block for layer1, but not zone offset itself.
zrj [Mon, 7 Nov 2016 12:33:52 +0000 (14:33 +0200)]
bsd.crunchgen.mk: Sync with FreeBSD.
This finally allows not to relink rescue image if there are no changes and
have clean stage of "4d: building everything.."!
Helps a lot on LTO quick rebuilds.
While there, remove hack from crunchgen(1), it no longer should be needed.
Please report build races if any.
Taken-from: FreeBSD
zrj [Mon, 7 Nov 2016 11:32:11 +0000 (13:32 +0200)]
bsd.crunchgen.mk: Split few monolitic targets.
For easier debug.
Taken-from: FreeBSD
zrj [Mon, 7 Nov 2016 11:12:54 +0000 (13:12 +0200)]
bsd.crunchgen.mk: Simplify mk logic a bit.
Just provide defaults if needed.
zrj [Mon, 7 Nov 2016 10:40:29 +0000 (12:40 +0200)]
bsd.crunchgen.mk: Remove dub handling of CANONICALOBJDIR.
It is already handled in bsd.obj.mk.
While there, drop non functional NO_DEBUG_FILES and update bsd.README.
zrj [Mon, 7 Nov 2016 08:48:16 +0000 (10:48 +0200)]
bsd.crunchgen.mk: No longer exclude -P option.
It was used only when fmake.
While there, do not hardcode crunchgen name and add env handling.
Taken-from: FreeBSD
zrj [Mon, 7 Nov 2016 08:40:22 +0000 (10:40 +0200)]
bsd.crunchgen.mk: Use single style for variables.
No functional change.
Imre Vadász [Mon, 7 Nov 2016 21:02:31 +0000 (22:02 +0100)]
if_iwm - Advertise full-offload scan support, fixes scan while associated.
* This avoids the firmware panics previously experienced when starting a
wlan scan (e.g. with "ifconfig wlan0 scan" or "scan" command in a
wpa_supplicant user-interface), while associated to an AP.
Imre Vadász [Mon, 7 Nov 2016 20:45:45 +0000 (21:45 +0100)]
wlan - Import initial full-offload scan support from FreeBSD.
This is a very simple addition to the net80211 scan support.
It doesn't implement a replacement scan interface - it just disables
the pieces that we should disable to make this lifecycle a bit
more managable.
There's more work to come before full scan offload support is available
but it should be good enough for driver work.
* add a flag to say "full offload"
* don't do probe requests when scanning full-offload - firmware can do that
* don't do powersave transitions and buffering - firmware can do that
* don't abort a background scan upon reception of a single packet.
Full offload drivers don't need this behaviour - they do it in firmware.
Taken-From: FreeBSD (svn r307602, r308007 and r308008)
Tomohiro Kusumi [Mon, 7 Nov 2016 15:12:54 +0000 (00:12 +0900)]
sys/vfs/hammer: Use HAMMER_BUFSIZE_DOALIGN() and variants
This should have been in
bbc5e78b (failed to catch these).
Tomohiro Kusumi [Mon, 7 Nov 2016 15:06:43 +0000 (00:06 +0900)]
sys/vfs/hammer: Cleanups
Tomohiro Kusumi [Mon, 7 Nov 2016 14:53:08 +0000 (23:53 +0900)]
sys/vfs/hammer: Add HAMMER_BIGBLOCK_DOALIGN()
The only reason it's "DOALIGN" instead of just "ALIGN" is
because that's how macros have been named in HAMMER1/2.
"ALIGN" macros represent alignment size.
Matthew Dillon [Tue, 8 Nov 2016 02:56:34 +0000 (18:56 -0800)]
kernel - Attempt to fix cluster pbuf deadlock on recursive filesystems
* Change global pbuf count limits (used primarily for clustered I/O) to
per-mount and per-device limits. The per-mount / per-device limit
is set to nswbuf_kva / 10, allowing 10 different entities to obtain
pbufs concurrently without interference.
* This change goes a long way towards fixing deadlocks that could occur
with the old global system (a global limit of nswbuf_kva / 2) when
the I/O system recurses through a virtual block device or filesystem.
Two examples of virtual block devices are the 'vn' device and the crypto
layer.
* We also note that even normal filesystem read and write I/O strategy calls
will recurse at least once to dive the underlying block device. DFly also
had issues with pbuf hogging by one mount causing unnecessary stalls
in other mounts. This fix also prevents pbuf hogging.
* Remove unused internal O_MAPONREAD flag.
Reported-by: htse, multiple
Testing-by: htse, dillon
Matthew Dillon [Sun, 6 Nov 2016 19:55:45 +0000 (11:55 -0800)]
kernel - Add nvme to the default kernel build
* Add the nvme disk driver to the default kernel build, it no longer
needs to be loaded as a module.
Tomohiro Kusumi [Mon, 7 Nov 2016 12:04:41 +0000 (21:04 +0900)]
sbin/hammer: Cleanup alloc_blockmap()
Layer1 could be assertion.
It's essentially the same as what
0d1f6085 in 2015 checks.
Tomohiro Kusumi [Sun, 6 Nov 2016 14:14:06 +0000 (23:14 +0900)]
sbin/hammer: Add another condition to assert_volume_offset()
which is kinda obvious and expected to be false on newfs time.
Tomohiro Kusumi [Sun, 6 Nov 2016 14:29:54 +0000 (23:29 +0900)]
sbin/hammer: Split alloc_bigblock() into two functions [2/2]
This function is currently only used by zone-3, but it's actually
only usable by zone-3 from the way it's implemented, so rename it
to alloc_undo_bigblock() and get rid of zone argument.
The way blockmap offsets (in root volume) get updated for zone-3
differs from other zones like 8/9/10/11, and this function which
doesn't update blockmap offsets on allocation only works against
zone-3.
Tomohiro Kusumi [Sun, 6 Nov 2016 13:51:09 +0000 (22:51 +0900)]
sbin/hammer: Split alloc_bigblock() into two functions [1/2]
For zone-4, all you can (need to) do is increment offset by 8MB,
so split alloc_bigblock() into bootstrap_bigblock() for zone-4 and
alloc_bigblock() for zone-3. It's easier to understand this way.
Sascha Wildner [Sun, 6 Nov 2016 23:08:49 +0000 (00:08 +0100)]
Adjust various things after the removal of secure/.
* Fix etc/Makefile: This brings back installation of /etc/ssh_config
and /etc/sshd_config to our IMG/ISO.
* Add back DES and Blowfish functions to libcrypt.
* Remove installation of CA.pl/CA.sh. They don't seem to be part of
LibreSSL.
* Remove obsolete paths from whereis(1).
* Adjust hier(7) manual page.
* Adjust openssh upgrade instructions.
* While here, fix a typo in Makefile.ssh.common.
Imre Vadász [Sun, 6 Nov 2016 21:21:22 +0000 (22:21 +0100)]
if_iwm - The iwm_prepare_card_hw() in iwm_attach() is only needed on 8K hw.
* Doing the iwm_prepare_card_hw() call in iwm_attach() only on Family 8000
hardware matches the code in Linux iwlwifi.
* While there remove DEFAULT_MAX_TX_POWER definition which is unused, and
has a value different from IWL_DEFAULT_MAX_TX_POWER in iwlwifi.
Imre Vadász [Sun, 6 Nov 2016 16:44:56 +0000 (17:44 +0100)]
if_iwm - Use rates given in struct ieee80211_txparam for non-data transfers.
* Make iwm_tx_fill_cmd() just return the uint8_t rate, to avoid looking up
the firmware rate-index for DATA transfers.
Taken-From: FreeBSD (svn r306286)
Imre Vadász [Sun, 6 Nov 2016 15:25:54 +0000 (16:25 +0100)]
if_iwm - Update firmware rs table, instead of indexing the table in tx cmds.
* Rather than providing a non-zero index into the firmware RS table,
we should always use index 0 and update the firmware RS table whenever
our chosen tx rate for data-frames changes.
* Send IWM_LQ_CMD updates when the tx rate gets updated by the net80211
rate control (which is after we tell the tx status to the net80211
rate-control in iwm_mvm_rx_tx_cmd_single()).
* Disregard frames transferred with a different tx rate than the currently
selected rate for the rate-control calculations. This way we avoid
counting management frames (which are sent at a slow, and fixed rate),
as well as frames we added to the tx queue just before a new IWM_LQ_CMD
update took effect.
Inspired-By: Linux iwlwifi
Matthew Dillon [Sun, 6 Nov 2016 19:24:00 +0000 (11:24 -0800)]
build - Fix modifying operation to /usr/obj during installworld (2)
* efi/boot1 needs the same treatment as the last commit.
Reported-by: ivadasz
Matthew Dillon [Sun, 6 Nov 2016 18:56:35 +0000 (10:56 -0800)]
build - Fix modifying operation to /usr/obj during installworld.
* The build for /usr/src/sys/boot/efi/loader is incomplete. The
installworld step tries to build the last piece. Add the piece to
all: to properly build it during the build phase and not the
install phase.
Tomohiro Kusumi [Sun, 6 Nov 2016 06:17:37 +0000 (15:17 +0900)]
sys/vfs/hammer: Add HAMMER_DATA_DOALIGN() and variants
The only reason it's "DOALIGN" instead of just "ALIGN" is
because that's how macros have been named in HAMMER1/2.
"ALIGN" macros represent alignment size.
Tomohiro Kusumi [Sun, 6 Nov 2016 06:35:28 +0000 (15:35 +0900)]
sys/vfs/hammer: Add HAMMER_BUFSIZE_DOALIGN() and variants
The only reason it's "DOALIGN" instead of just "ALIGN" is
because that's how macros have been named in HAMMER1/2.
"ALIGN" macros represent alignment size.
Tomohiro Kusumi [Sun, 6 Nov 2016 05:47:26 +0000 (14:47 +0900)]
sys/vfs/hammer: Add HAMMER_BLOCKMAP_LAYER2_DOALIGN()
The only reason it's "DOALIGN" instead of just "ALIGN" is
because that's how macros have been named in HAMMER1/2.
"ALIGN" macros represent alignment size.
Tomohiro Kusumi [Sun, 6 Nov 2016 05:20:12 +0000 (14:20 +0900)]
sbin/hammer: Add a TODO comment for hammer recover
The way hammer recover simply walks through zone-2 offset from
0 to the end of the volume is inefficient.
Since we know most big-blocks are not for zone-8 (B-Tree zone),
most of the time and I/O spent for testing B-Tree nodes is wasted.
If zone-2 offset can be reverse mapped to zone-X, it no longer
needs to always call recover_top() assuming offsets are for
B-Tree nodes when we know it's mostly wrong.
Reverse mapping can also avoid possible misinterpretation of
zone-2 buffers (i.e. wrong cast to hammer_node_ondisk_t).
zrj [Sun, 6 Nov 2016 08:25:19 +0000 (10:25 +0200)]
tic(1): Add missing beforedepend for termsort.c.
Noticed-by: swildner
Antonio Huete Jimenez [Sat, 5 Nov 2016 17:56:27 +0000 (18:56 +0100)]
installer - Enhance test_storage program
- Warn when run as non-root.
- Actually print detected disks after execution.
Antonio Huete Jimenez [Sat, 5 Nov 2016 14:22:07 +0000 (15:22 +0100)]
installer - Reorganize test directory a bit
Matthew Dillon [Sat, 5 Nov 2016 19:36:31 +0000 (12:36 -0700)]
doc - Document 'crypt' option in fstab(5)
* The 'crypt' was documented in swapon(8) but most people would probably
look for it in fstab(5), so put it there too.
Sascha Wildner [Sat, 5 Nov 2016 07:28:51 +0000 (08:28 +0100)]
boot: Use snprintf() when filling command_errbuf[] w/ dynamic content.
Taken-from: FreeBSD
Sascha Wildner [Fri, 4 Nov 2016 18:49:54 +0000 (19:49 +0100)]
Sync zoneinfo database with tzdata2016i from ftp://ftp.iana.org/tz/releases
* Pacific/Tongatapu begins DST on 2016-11-06 at 02:00, ending on
2017-01-15 at 03:00. Assume future observances in Tonga will be
from the first Sunday in November through the third Sunday in
January, like Fiji. (Thanks to Pulu ʻAnau.) Switch to numeric
time zone abbreviations for this zone.
* Northern Cyprus is now +03 year round, causing a split in Cyprus
time zones starting 2016-10-30 at 04:00. This creates a zone
Asia/Famagusta. (Thanks to Even Scharning and Matt Johnson.)
* Antarctica/Casey switched from +08 to +11 on 2016-10-22.
(Thanks to Steffen Thorsen.)
* Several corrections were made for pre-1975 time stamps in Italy.
These affect Europe/Malta, Europe/Rome, Europe/San_Marino, and
Europe/Vatican.
First, the 1893-11-01 00:00 transition in Italy used the new UT
offset (+01), not the old (+00:49:56). (Thanks to Michael
Deckers.)
Second, rules for daylight saving in Italy were changed to agree
with Italy's National Institute of Metrological Research (INRiM)
except for 1944, as follows (thanks to Pierpaolo Bernardi, Brian
Inglis, and Michael Deckers):
The 1916-06-03 transition was at 24:00, not 00:00.
The 1916-10-01, 1919-10-05, and 1920-09-19 transitions were at
00:00, not 01:00.
The 1917-09-30 and 1918-10-06 transitions were at 24:00, not
01:00.
The 1944-09-17 transition was at 03:00, not 01:00. This
particular change is taken from Italian law as INRiM's table,
(which says 02:00) appears to have a typo here. Also, keep the
1944-04-03 transition for Europe/Rome, as Rome was controlled by
Germany then.
The 1967-1970 and 1972-1974 fallback transitions were at 01:00,
not 00:00.
Sascha Wildner [Fri, 4 Nov 2016 17:39:27 +0000 (18:39 +0100)]
<sys/cdefs.h>/<machine/stdint.h>: Fix __STDC_VERSION__ macro.
Noticed-by: zrj