Merge branch 'vendor/OPENSSL'
[dragonfly.git] / sys / netinet6 / udp6_output.c
1 /*      $FreeBSD: src/sys/netinet6/udp6_output.c,v 1.1.2.6 2003/01/23 21:06:47 sam Exp $        */
2 /*      $DragonFly: src/sys/netinet6/udp6_output.c,v 1.9 2008/09/04 09:08:22 hasso Exp $        */
3 /*      $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $    */
4
5 /*
6  * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 3. Neither the name of the project nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33
34 /*
35  * Copyright (c) 1982, 1986, 1989, 1993
36  *      The Regents of the University of California.  All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  * 1. Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  * 2. Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in the
45  *    documentation and/or other materials provided with the distribution.
46  * 3. All advertising materials mentioning features or use of this software
47  *    must display the following acknowledgement:
48  *      This product includes software developed by the University of
49  *      California, Berkeley and its contributors.
50  * 4. Neither the name of the University nor the names of its contributors
51  *    may be used to endorse or promote products derived from this software
52  *    without specific prior written permission.
53  *
54  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
55  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
56  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
57  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
58  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
59  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
60  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
61  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
62  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
63  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
64  * SUCH DAMAGE.
65  *
66  *      @(#)udp_var.h   8.1 (Berkeley) 6/10/93
67  */
68
69 #include "opt_ipsec.h"
70 #include "opt_inet.h"
71 #include "opt_inet6.h"
72
73 #include <sys/param.h>
74 #include <sys/malloc.h>
75 #include <sys/mbuf.h>
76 #include <sys/protosw.h>
77 #include <sys/socket.h>
78 #include <sys/socketvar.h>
79 #include <sys/sysctl.h>
80 #include <sys/errno.h>
81 #include <sys/stat.h>
82 #include <sys/systm.h>
83 #include <sys/proc.h>
84 #include <sys/priv.h>
85 #include <sys/syslog.h>
86
87 #include <net/if.h>
88 #include <net/route.h>
89 #include <net/if_types.h>
90
91 #include <netinet/in.h>
92 #include <netinet/in_var.h>
93 #include <netinet/in_systm.h>
94 #include <netinet/ip.h>
95 #include <netinet/ip_var.h>
96 #include <netinet/in_pcb.h>
97 #include <netinet/udp.h>
98 #include <netinet/udp_var.h>
99 #include <netinet/ip6.h>
100 #include <netinet6/ip6_var.h>
101 #include <netinet6/in6_pcb.h>
102 #include <netinet6/udp6_var.h>
103 #include <netinet/icmp6.h>
104 #include <netinet6/ip6protosw.h>
105
106 #ifdef IPSEC
107 #include <netinet6/ipsec.h>
108 #ifdef INET6
109 #include <netinet6/ipsec6.h>
110 #endif
111 #endif /* IPSEC */
112
113 #include <net/net_osdep.h>
114
115 /*
116  * UDP protocol inplementation.
117  * Per RFC 768, August, 1980.
118  */
119
120 #define in6pcb          inpcb
121 #define udp6stat        udpstat
122 #define udp6s_opackets  udps_opackets
123
124 int
125 udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
126             struct mbuf *control, struct thread *td)
127 {
128         u_int32_t ulen = m->m_pkthdr.len;
129         u_int32_t plen = sizeof(struct udphdr) + ulen;
130         struct ip6_hdr *ip6;
131         struct udphdr *udp6;
132         struct in6_addr *laddr, *faddr;
133         u_short fport;
134         int error = 0;
135         struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
136         int priv;
137         int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
138         int flags;
139         struct sockaddr_in6 tmp;
140
141         priv = !priv_check(td, PRIV_ROOT);      /* 1 if privileged, 0 if not */
142         if (control) {
143                 if ((error = ip6_setpktoptions(control, &opt,
144                     in6p->in6p_outputopts, 
145                     IPPROTO_UDP, priv)) != 0)
146                         goto release;
147                 in6p->in6p_outputopts = &opt;
148         }
149
150         if (addr6) {
151                 /*
152                  * IPv4 version of udp_output calls in_pcbconnect in this case,
153                  * which needs splnet and affects performance.
154                  * Since we saw no essential reason for calling in_pcbconnect,
155                  * we get rid of such kind of logic, and call in6_selectsrc
156                  * and in6_pcbsetport in order to fill in the local address
157                  * and the local port.
158                  */
159                 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
160                 if (sin6->sin6_port == 0) {
161                         error = EADDRNOTAVAIL;
162                         goto release;
163                 }
164
165                 if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
166                         /* how about ::ffff:0.0.0.0 case? */
167                         error = EISCONN;
168                         goto release;
169                 }
170                 if (!prison_remote_ip(td, (struct sockaddr *)addr6)) {
171                         error = EAFNOSUPPORT; /* IPv4 only jail */
172                         goto release;
173                 }
174
175                 /* protect *sin6 from overwrites */
176                 tmp = *sin6;
177                 sin6 = &tmp;
178
179                 faddr = &sin6->sin6_addr;
180                 fport = sin6->sin6_port; /* allow 0 port */
181
182                 if (IN6_IS_ADDR_V4MAPPED(faddr)) {
183                         if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
184                                 /*
185                                  * I believe we should explicitly discard the
186                                  * packet when mapped addresses are disabled,
187                                  * rather than send the packet as an IPv6 one.
188                                  * If we chose the latter approach, the packet
189                                  * might be sent out on the wire based on the
190                                  * default route, the situation which we'd
191                                  * probably want to avoid.
192                                  * (20010421 jinmei@kame.net)
193                                  */
194                                 error = EINVAL;
195                                 goto release;
196                         } else
197                                 af = AF_INET;
198                 }
199
200                 /* KAME hack: embed scopeid */
201                 if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
202                         error = EINVAL;
203                         goto release;
204                 }
205
206                 if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
207                         laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
208                                               in6p->in6p_moptions,
209                                               &in6p->in6p_route,
210                                               &in6p->in6p_laddr, &error, NULL);
211                 } else
212                         laddr = &in6p->in6p_laddr;      /* XXX */
213                 if (laddr == NULL) {
214                         if (error == 0)
215                                 error = EADDRNOTAVAIL;
216                         goto release;
217                 }
218                 if (in6p->in6p_lport == 0 &&
219                     (error = in6_pcbsetport(laddr, in6p, td)) != 0)
220                         goto release;
221         } else {
222                 if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
223                         error = ENOTCONN;
224                         goto release;
225                 }
226                 if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
227                         if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
228                                 /*
229                                  * XXX: this case would happen when the
230                                  * application sets the V6ONLY flag after
231                                  * connecting the foreign address.
232                                  * Such applications should be fixed,
233                                  * so we bark here.
234                                  */
235                                 log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
236                                     "option was set for a connected socket\n");
237                                 error = EINVAL;
238                                 goto release;
239                         } else
240                                 af = AF_INET;
241                 }
242                 laddr = &in6p->in6p_laddr;
243                 faddr = &in6p->in6p_faddr;
244                 fport = in6p->in6p_fport;
245         }
246
247         if (af == AF_INET)
248                 hlen = sizeof(struct ip);
249
250         /*
251          * Calculate data length and get a mbuf
252          * for UDP and IP6 headers.
253          */
254         M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
255         if (m == 0) {
256                 error = ENOBUFS;
257                 goto release;
258         }
259
260         /*
261          * Stuff checksum and output datagram.
262          */
263         udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
264         udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
265         udp6->uh_dport = fport;
266         if (plen <= 0xffff)
267                 udp6->uh_ulen = htons((u_short)plen);
268         else
269                 udp6->uh_ulen = 0;
270         udp6->uh_sum = 0;
271
272         switch (af) {
273         case AF_INET6:
274                 ip6 = mtod(m, struct ip6_hdr *);
275                 ip6->ip6_flow   = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
276                 ip6->ip6_vfc    &= ~IPV6_VERSION_MASK;
277                 ip6->ip6_vfc    |= IPV6_VERSION;
278 #if 0                           /* ip6_plen will be filled in ip6_output. */
279                 ip6->ip6_plen   = htons((u_short)plen);
280 #endif
281                 ip6->ip6_nxt    = IPPROTO_UDP;
282                 ip6->ip6_hlim   = in6_selecthlim(in6p,
283                                                  in6p->in6p_route.ro_rt ?
284                                                  in6p->in6p_route.ro_rt->rt_ifp : NULL);
285                 ip6->ip6_src    = *laddr;
286                 ip6->ip6_dst    = *faddr;
287
288                 if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
289                                 sizeof(struct ip6_hdr), plen)) == 0) {
290                         udp6->uh_sum = 0xffff;
291                 }
292
293                 flags = 0;
294
295                 udp6stat.udp6s_opackets++;
296                 error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
297                     flags, in6p->in6p_moptions, NULL, in6p);
298                 break;
299         case AF_INET:
300                 error = EAFNOSUPPORT;
301                 goto release;
302         }
303         goto releaseopt;
304
305 release:
306         m_freem(m);
307
308 releaseopt:
309         if (control) {
310                 ip6_clearpktopts(in6p->in6p_outputopts, -1);
311                 in6p->in6p_outputopts = stickyopt;
312                 m_freem(control);
313         }
314         return (error);
315 }