2 * Copyright (c) 1990 William Jolitz.
3 * Copyright (c) 1991 The Regents of the University of California.
4 * Copyright (c) 2006 The DragonFly Project.
5 * Copyright (c) 2006 Matthew Dillon.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
18 * 3. Neither the name of The DragonFly Project nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific, prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
25 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
26 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
28 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
30 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
31 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
32 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * from: @(#)npx.c 7.2 (Berkeley) 5/12/91
36 * $FreeBSD: src/sys/i386/isa/npx.c,v 1.80.2.3 2001/10/20 19:04:38 tegge Exp $
39 #include "opt_debug_npx.h"
41 #include <sys/param.h>
42 #include <sys/systm.h>
44 #include <sys/kernel.h>
45 #include <sys/malloc.h>
46 #include <sys/module.h>
47 #include <sys/sysctl.h>
51 #include <sys/syslog.h>
53 #include <sys/signalvar.h>
54 #include <sys/thread2.h>
57 #include <machine/asmacros.h>
59 #include <machine/cputypes.h>
60 #include <machine/frame.h>
61 #include <machine/md_var.h>
62 #include <machine/pcb.h>
63 #include <machine/psl.h>
65 #include <machine/clock.h>
67 #include <machine/specialreg.h>
68 #include <machine/segments.h>
69 #include <machine/globaldata.h>
71 #define fldcw(addr) __asm("fldcw %0" : : "m" (*(addr)))
72 #define fnclex() __asm("fnclex")
73 #define fninit() __asm("fninit")
74 #define fnop() __asm("fnop")
75 #define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr)))
76 #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr)))
77 #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=m" (*(addr)))
78 #define frstor(addr) __asm("frstor %0" : : "m" (*(addr)))
79 #ifndef CPU_DISABLE_SSE
80 #define fxrstor(addr) __asm("fxrstor %0" : : "m" (*(addr)))
81 #define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr)))
83 #define start_emulating() __asm("smsw %%ax; orb %0,%%al; lmsw %%ax" \
84 : : "n" (CR0_TS) : "ax")
85 #define stop_emulating() __asm("clts")
87 #ifndef CPU_DISABLE_SSE
88 #define GET_FPU_EXSW_PTR(td) \
90 &(td)->td_savefpu->sv_xmm.sv_ex_sw : \
91 &(td)->td_savefpu->sv_87.sv_ex_sw)
92 #else /* CPU_DISABLE_SSE */
93 #define GET_FPU_EXSW_PTR(td) \
94 (&(td)->td_savefpu->sv_87.sv_ex_sw)
95 #endif /* CPU_DISABLE_SSE */
97 typedef u_char bool_t;
98 #ifndef CPU_DISABLE_SSE
99 static void fpu_clean_state(void);
102 static struct krate badfprate = { 1 };
104 static void fpusave (union savefpu *);
105 static void fpurstor (union savefpu *);
108 * Initialize the floating point unit.
111 npxinit(u_short control)
113 static union savefpu dummy __aligned(16);
116 * fninit has the same h/w bugs as fnsave. Use the detoxified
117 * fnsave to throw away any junk in the fpu. npxsave() initializes
118 * the fpu and sets npxthread = NULL as important side effects.
124 fpusave(curthread->td_savefpu);
125 mdcpu->gd_npxthread = NULL;
131 * Free coprocessor (if we have it).
136 if (curthread == mdcpu->gd_npxthread)
137 npxsave(curthread->td_savefpu);
142 * The following mechanism is used to ensure that the FPE_... value
143 * that is passed as a trapcode to the signal handler of the user
144 * process does not have more than one bit set.
146 * Multiple bits may be set if the user process modifies the control
147 * word while a status word bit is already set. While this is a sign
148 * of bad coding, we have no choise than to narrow them down to one
149 * bit, since we must not send a trapcode that is not exactly one of
152 * The mechanism has a static table with 127 entries. Each combination
153 * of the 7 FPU status word exception bits directly translates to a
154 * position in this table, where a single FPE_... value is stored.
155 * This FPE_... value stored there is considered the "most important"
156 * of the exception bits and will be sent as the signal code. The
157 * precedence of the bits is based upon Intel Document "Numerical
158 * Applications", Chapter "Special Computational Situations".
160 * The macro to choose one of these values does these steps: 1) Throw
161 * away status word bits that cannot be masked. 2) Throw away the bits
162 * currently masked in the control word, assuming the user isn't
163 * interested in them anymore. 3) Reinsert status word bit 7 (stack
164 * fault) if it is set, which cannot be masked but must be presered.
165 * 4) Use the remaining bits to point into the trapcode table.
167 * The 6 maskable bits in order of their preference, as stated in the
168 * above referenced Intel manual:
169 * 1 Invalid operation (FP_X_INV)
172 * 1c Operand of unsupported format
174 * 2 QNaN operand (not an exception, irrelavant here)
175 * 3 Any other invalid-operation not mentioned above or zero divide
176 * (FP_X_INV, FP_X_DZ)
177 * 4 Denormal operand (FP_X_DNML)
178 * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL)
179 * 6 Inexact result (FP_X_IMP)
181 static char fpetable[128] = {
183 FPE_FLTINV, /* 1 - INV */
184 FPE_FLTUND, /* 2 - DNML */
185 FPE_FLTINV, /* 3 - INV | DNML */
186 FPE_FLTDIV, /* 4 - DZ */
187 FPE_FLTINV, /* 5 - INV | DZ */
188 FPE_FLTDIV, /* 6 - DNML | DZ */
189 FPE_FLTINV, /* 7 - INV | DNML | DZ */
190 FPE_FLTOVF, /* 8 - OFL */
191 FPE_FLTINV, /* 9 - INV | OFL */
192 FPE_FLTUND, /* A - DNML | OFL */
193 FPE_FLTINV, /* B - INV | DNML | OFL */
194 FPE_FLTDIV, /* C - DZ | OFL */
195 FPE_FLTINV, /* D - INV | DZ | OFL */
196 FPE_FLTDIV, /* E - DNML | DZ | OFL */
197 FPE_FLTINV, /* F - INV | DNML | DZ | OFL */
198 FPE_FLTUND, /* 10 - UFL */
199 FPE_FLTINV, /* 11 - INV | UFL */
200 FPE_FLTUND, /* 12 - DNML | UFL */
201 FPE_FLTINV, /* 13 - INV | DNML | UFL */
202 FPE_FLTDIV, /* 14 - DZ | UFL */
203 FPE_FLTINV, /* 15 - INV | DZ | UFL */
204 FPE_FLTDIV, /* 16 - DNML | DZ | UFL */
205 FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */
206 FPE_FLTOVF, /* 18 - OFL | UFL */
207 FPE_FLTINV, /* 19 - INV | OFL | UFL */
208 FPE_FLTUND, /* 1A - DNML | OFL | UFL */
209 FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */
210 FPE_FLTDIV, /* 1C - DZ | OFL | UFL */
211 FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */
212 FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */
213 FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */
214 FPE_FLTRES, /* 20 - IMP */
215 FPE_FLTINV, /* 21 - INV | IMP */
216 FPE_FLTUND, /* 22 - DNML | IMP */
217 FPE_FLTINV, /* 23 - INV | DNML | IMP */
218 FPE_FLTDIV, /* 24 - DZ | IMP */
219 FPE_FLTINV, /* 25 - INV | DZ | IMP */
220 FPE_FLTDIV, /* 26 - DNML | DZ | IMP */
221 FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */
222 FPE_FLTOVF, /* 28 - OFL | IMP */
223 FPE_FLTINV, /* 29 - INV | OFL | IMP */
224 FPE_FLTUND, /* 2A - DNML | OFL | IMP */
225 FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */
226 FPE_FLTDIV, /* 2C - DZ | OFL | IMP */
227 FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */
228 FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */
229 FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */
230 FPE_FLTUND, /* 30 - UFL | IMP */
231 FPE_FLTINV, /* 31 - INV | UFL | IMP */
232 FPE_FLTUND, /* 32 - DNML | UFL | IMP */
233 FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */
234 FPE_FLTDIV, /* 34 - DZ | UFL | IMP */
235 FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */
236 FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */
237 FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */
238 FPE_FLTOVF, /* 38 - OFL | UFL | IMP */
239 FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */
240 FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */
241 FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */
242 FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */
243 FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */
244 FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */
245 FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */
246 FPE_FLTSUB, /* 40 - STK */
247 FPE_FLTSUB, /* 41 - INV | STK */
248 FPE_FLTUND, /* 42 - DNML | STK */
249 FPE_FLTSUB, /* 43 - INV | DNML | STK */
250 FPE_FLTDIV, /* 44 - DZ | STK */
251 FPE_FLTSUB, /* 45 - INV | DZ | STK */
252 FPE_FLTDIV, /* 46 - DNML | DZ | STK */
253 FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */
254 FPE_FLTOVF, /* 48 - OFL | STK */
255 FPE_FLTSUB, /* 49 - INV | OFL | STK */
256 FPE_FLTUND, /* 4A - DNML | OFL | STK */
257 FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */
258 FPE_FLTDIV, /* 4C - DZ | OFL | STK */
259 FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */
260 FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */
261 FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */
262 FPE_FLTUND, /* 50 - UFL | STK */
263 FPE_FLTSUB, /* 51 - INV | UFL | STK */
264 FPE_FLTUND, /* 52 - DNML | UFL | STK */
265 FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */
266 FPE_FLTDIV, /* 54 - DZ | UFL | STK */
267 FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */
268 FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */
269 FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */
270 FPE_FLTOVF, /* 58 - OFL | UFL | STK */
271 FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */
272 FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */
273 FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */
274 FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */
275 FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */
276 FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */
277 FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */
278 FPE_FLTRES, /* 60 - IMP | STK */
279 FPE_FLTSUB, /* 61 - INV | IMP | STK */
280 FPE_FLTUND, /* 62 - DNML | IMP | STK */
281 FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */
282 FPE_FLTDIV, /* 64 - DZ | IMP | STK */
283 FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */
284 FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */
285 FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */
286 FPE_FLTOVF, /* 68 - OFL | IMP | STK */
287 FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */
288 FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */
289 FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */
290 FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */
291 FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */
292 FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */
293 FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */
294 FPE_FLTUND, /* 70 - UFL | IMP | STK */
295 FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */
296 FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */
297 FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */
298 FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */
299 FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */
300 FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */
301 FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */
302 FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */
303 FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */
304 FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */
305 FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */
306 FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */
307 FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */
308 FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */
309 FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */
317 * Preserve the FP status word, clear FP exceptions, then generate a SIGFPE.
319 * Clearing exceptions is necessary mainly to avoid IRQ13 bugs. We now
320 * depend on longjmp() restoring a usable state. Restoring the state
321 * or examining it might fail if we didn't clear exceptions.
323 * The error code chosen will be one of the FPE_... macros. It will be
324 * sent as the second argument to old BSD-style signal handlers and as
325 * "siginfo_t->si_code" (second argument) to SA_SIGINFO signal handlers.
327 * XXX the FP state is not preserved across signal handlers. So signal
328 * handlers cannot afford to do FP unless they preserve the state or
329 * longjmp() out. Both preserving the state and longjmp()ing may be
330 * destroyed by IRQ13 bugs. Clearing FP exceptions is not an acceptable
331 * solution for signals other than SIGFPE.
333 * The MP lock is not held on entry (see i386/i386/exception.s) and
334 * should not be held on exit. Interrupts are enabled. We must enter
335 * a critical section to stabilize the FP system and prevent an interrupt
336 * or preemption from changing the FP state out from under us.
339 npx_intr(void *dummy)
343 struct intrframe *frame;
349 * This exception can only occur with CR0_TS clear, otherwise we
350 * would get a DNA exception. However, since interrupts were
351 * enabled a preemption could have sneaked in and used the FP system
352 * before we entered our critical section. If that occured, the
353 * TS bit will be set and npxthread will be NULL.
355 panic("npx_intr: not coded");
356 /* XXX FP STATE FLAG MUST BE PART OF CONTEXT SUPPLIED BY REAL KERNEL */
358 if (rcr0() & CR0_TS) {
359 KASSERT(mdcpu->gd_npxthread == NULL, ("gd_npxthread was %p with TS set!", mdcpu->gd_npxthread));
365 if (mdcpu->gd_npxthread == NULL) {
367 kprintf("npxintr: npxthread = %p, curthread = %p\n",
368 mdcpu->gd_npxthread, curthread);
369 panic("npxintr from nowhere");
371 if (mdcpu->gd_npxthread != curthread) {
373 kprintf("npxintr: npxthread = %p, curthread = %p\n",
374 mdcpu->gd_npxthread, curthread);
375 panic("npxintr from non-current process");
378 exstat = GET_FPU_EXSW_PTR(curthread);
387 * Pass exception to process.
389 frame = (struct intrframe *)&dummy; /* XXX */
390 if ((ISPL(frame->if_cs) == SEL_UPL) /*||(frame->if_eflags&PSL_VM)*/) {
392 * Interrupt is essentially a trap, so we can afford to call
393 * the SIGFPE handler (if any) as soon as the interrupt
396 * XXX little or nothing is gained from this, and plenty is
397 * lost - the interrupt frame has to contain the trap frame
398 * (this is otherwise only necessary for the rescheduling trap
399 * in doreti, and the frame for that could easily be set up
400 * just before it is used).
402 curthread->td_lwp->lwp_md.md_regs = INTR_TO_TRAPFRAME(frame);
404 * Encode the appropriate code for detailed information on
408 fpetable[(*exstat & ~control & 0x3f) | (*exstat & 0x40)];
409 trapsignal(curthread->td_lwp, SIGFPE, code);
412 * Nested interrupt. These losers occur when:
413 * o an IRQ13 is bogusly generated at a bogus time, e.g.:
414 * o immediately after an fnsave or frstor of an
416 * o a couple of 386 instructions after
417 * "fstpl _memvar" causes a stack overflow.
418 * These are especially nasty when combined with a
420 * o an IRQ13 occurs at the same time as another higher-
421 * priority interrupt.
423 * Treat them like a true async interrupt.
425 lwpsignal(curproc, curthread->td_lwp, SIGFPE);
434 * Implement the device not available (DNA) exception. gd_npxthread had
435 * better be NULL. Restore the current thread's FP state and set gd_npxthread
438 * Interrupts are enabled and preemption can occur. Enter a critical
439 * section to stabilize the FP state.
444 thread_t td = curthread;
448 if (mdcpu->gd_npxthread != NULL) {
449 kprintf("npxdna: npxthread = %p, curthread = %p\n",
450 mdcpu->gd_npxthread, curthread);
455 * Setup the initial saved state if the thread has never before
456 * used the FP unit. This also occurs when a thread pushes a
457 * signal handler and uses FP in the handler.
459 if ((td->td_flags & (TDF_USINGFP | TDF_KERNELFP)) == 0) {
460 td->td_flags |= TDF_USINGFP;
461 npxinit(__INITIAL_NPXCW__);
466 * The setting of gd_npxthread and the call to fpurstor() must not
467 * be preempted by an interrupt thread or we will take an npxdna
468 * trap and potentially save our current fpstate (which is garbage)
469 * and then restore the garbage rather then the originally saved
475 * Record new context early in case frstor causes an IRQ13.
477 mdcpu->gd_npxthread = td;
478 exstat = GET_FPU_EXSW_PTR(td);
481 * The following frstor may cause an IRQ13 when the state being
482 * restored has a pending error. The error will appear to have been
483 * triggered by the current (npx) user instruction even when that
484 * instruction is a no-wait instruction that should not trigger an
485 * error (e.g., fnclex). On at least one 486 system all of the
486 * no-wait instructions are broken the same as frstor, so our
487 * treatment does not amplify the breakage. On at least one
488 * 386/Cyrix 387 system, fnclex works correctly while frstor and
489 * fnsave are broken, so our treatment breaks fnclex if it is the
490 * first FPU instruction after a context switch.
492 if ((td->td_savefpu->sv_xmm.sv_env.en_mxcsr & ~0xFFBF)
493 #ifndef CPU_DISABLE_SSE
497 krateprintf(&badfprate,
498 "FXRSTR: illegal FP MXCSR %08x didinit = %d\n",
499 td->td_savefpu->sv_xmm.sv_env.en_mxcsr, didinit);
500 td->td_savefpu->sv_xmm.sv_env.en_mxcsr &= 0xFFBF;
501 lwpsignal(curproc, curthread->td_lwp, SIGFPE);
503 fpurstor(td->td_savefpu);
510 * Wrapper for the fnsave instruction to handle h/w bugs. If there is an error
511 * pending, then fnsave generates a bogus IRQ13 on some systems. Force
512 * any IRQ13 to be handled immediately, and then ignore it. This routine is
513 * often called at splhigh so it must not use many system services. In
514 * particular, it's much easier to install a special handler than to
515 * guarantee that it's safe to use npxintr() and its supporting code.
517 * WARNING! This call is made during a switch and the MP lock will be
518 * setup for the new target thread rather then the current thread, so we
519 * cannot do anything here that depends on the *_mplock() functions as
520 * we may trip over their assertions.
522 * WARNING! When using fxsave we MUST fninit after saving the FP state. The
523 * kernel will always assume that the FP state is 'safe' (will not cause
524 * exceptions) for mmx/xmm use if npxthread is NULL. The kernel must still
525 * setup a custom save area before actually using the FP unit, but it will
526 * not bother calling fninit. This greatly improves kernel performance when
527 * it wishes to use the FP unit.
530 npxsave(union savefpu *addr)
535 mdcpu->gd_npxthread = NULL;
542 fpusave(union savefpu *addr)
544 #ifndef CPU_DISABLE_SSE
553 * Save the FP state to the mcontext structure.
555 * WARNING: If you want to try to npxsave() directly to mctx->mc_fpregs,
556 * then it MUST be 16-byte aligned. Currently this is not guarenteed.
559 npxpush(mcontext_t *mctx)
561 thread_t td = curthread;
563 KKASSERT((td->td_flags & TDF_KERNELFP) == 0);
565 if (td->td_flags & TDF_USINGFP) {
566 if (mdcpu->gd_npxthread == td) {
568 * XXX Note: This is a bit inefficient if the signal
569 * handler uses floating point, extra faults will
572 mctx->mc_ownedfp = _MC_FPOWNED_FPU;
573 npxsave(td->td_savefpu);
575 mctx->mc_ownedfp = _MC_FPOWNED_PCB;
577 bcopy(td->td_savefpu, mctx->mc_fpregs, sizeof(mctx->mc_fpregs));
578 td->td_flags &= ~TDF_USINGFP;
580 #ifndef CPU_DISABLE_SSE
581 (cpu_fxsr) ? _MC_FPFMT_XMM :
585 mctx->mc_ownedfp = _MC_FPOWNED_NONE;
586 mctx->mc_fpformat = _MC_FPFMT_NODEV;
591 * Restore the FP state from the mcontext structure.
594 npxpop(mcontext_t *mctx)
596 thread_t td = curthread;
598 switch(mctx->mc_ownedfp) {
599 case _MC_FPOWNED_NONE:
601 * If the signal handler used the FP unit but the interrupted
602 * code did not, release the FP unit. Clear TDF_USINGFP will
603 * force the FP unit to reinit so the interrupted code sees
606 if (td->td_flags & TDF_USINGFP) {
607 if (td == mdcpu->gd_npxthread)
608 npxsave(td->td_savefpu);
609 td->td_flags &= ~TDF_USINGFP;
612 case _MC_FPOWNED_FPU:
613 case _MC_FPOWNED_PCB:
615 * Clear ownership of the FP unit and restore our saved state.
617 * NOTE: The signal handler may have set-up some FP state and
618 * enabled the FP unit, so we have to restore no matter what.
620 * XXX: This is bit inefficient, if the code being returned
621 * to is actively using the FP this results in multiple
624 * WARNING: The saved state was exposed to userland and may
625 * have to be sanitized to avoid a GP fault in the kernel.
627 if (td == mdcpu->gd_npxthread)
628 npxsave(td->td_savefpu);
629 bcopy(mctx->mc_fpregs, td->td_savefpu, sizeof(*td->td_savefpu));
630 if ((td->td_savefpu->sv_xmm.sv_env.en_mxcsr & ~0xFFBF)
631 #ifndef CPU_DISABLE_SSE
635 krateprintf(&badfprate,
636 "pid %d (%s) signal return from user: "
637 "illegal FP MXCSR %08x\n",
640 td->td_savefpu->sv_xmm.sv_env.en_mxcsr);
642 td->td_flags |= TDF_USINGFP;
648 #ifndef CPU_DISABLE_SSE
650 * On AuthenticAMD processors, the fxrstor instruction does not restore
651 * the x87's stored last instruction pointer, last data pointer, and last
652 * opcode values, except in the rare case in which the exception summary
653 * (ES) bit in the x87 status word is set to 1.
655 * In order to avoid leaking this information across processes, we clean
656 * these values by performing a dummy load before executing fxrstor().
658 static double dummy_variable = 0.0;
660 fpu_clean_state(void)
665 * Clear the ES bit in the x87 status word if it is currently
666 * set, in order to avoid causing a fault in the upcoming load.
673 * Load the dummy variable into the x87 stack. This mangles
674 * the x87 stack, but we don't care since we're about to call
677 __asm __volatile("ffree %%st(7); fld %0" : : "m" (dummy_variable));
679 #endif /* CPU_DISABLE_SSE */
682 fpurstor(union savefpu *addr)
684 #ifndef CPU_DISABLE_SSE