sys/dev/usbmisc/ukbd/ukbd.c

   1 /*
   2  * $FreeBSD: src/sys/dev/usb/ukbd.c,v 1.45 2003/10/04 21:41:01 joe Exp $
   3  * $DragonFly: src/sys/dev/usbmisc/ukbd/ukbd.c,v 1.14 2005/06/02 20:40:56 dillon Exp $
   4  */
   5
   6 /*
   7  * Copyright (c) 1998 The NetBSD Foundation, Inc.
   8  * All rights reserved.
   9  *
  10  * This code is derived from software contributed to The NetBSD Foundation
  11  * by Lennart Augustsson (lennart@augustsson.net) at
  12  * Carlstedt Research & Technology.
  13  *
  14  * Redistribution and use in source and binary forms, with or without
  15  * modification, are permitted provided that the following conditions
  16  * are met:
  17  * 1. Redistributions of source code must retain the above copyright
  18  *    notice, this list of conditions and the following disclaimer.
  19  * 2. Redistributions in binary form must reproduce the above copyright
  20  *    notice, this list of conditions and the following disclaimer in the
  21  *    documentation and/or other materials provided with the distribution.
  22  * 3. All advertising materials mentioning features or use of this software
  23  *    must display the following acknowledgement:
  24  *        This product includes software developed by the NetBSD
  25  *        Foundation, Inc. and its contributors.
  26  * 4. Neither the name of The NetBSD Foundation nor the names of its
  27  *    contributors may be used to endorse or promote products derived
  28  *    from this software without specific prior written permission.
  29  *
  30  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  31  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  32  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  33  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  34  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  35  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  36  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  37  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  38  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  39  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  40  * POSSIBILITY OF SUCH DAMAGE.
  41  */
  42
  43 /*
  44  * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf
  45  */
  46
  47 #include "opt_kbd.h"
  48 #include "opt_ukbd.h"
  49
  50 #include <sys/param.h>
  51 #include <sys/systm.h>
  52 #include <sys/kernel.h>
  53 #include <sys/ioccom.h>
  54 #include <sys/module.h>
  55 #include <sys/bus.h>
  56 #include <sys/file.h>
  57 #if defined(__FreeBSD__) && __FreeBSD_version >= 500000
  58 #include <sys/limits.h>
  59 #else
  60 #include <machine/limits.h>
  61 #endif
  62 #if defined(__FreeBSD__) && __FreeBSD_version >= 500014
  63 #include <sys/selinfo.h>
  64 #else
  65 #include <sys/select.h>
  66 #endif
  67 #include <sys/vnode.h>
  68 #include <sys/sysctl.h>
  69 #include <sys/thread2.h>
  70
  71 #include <bus/usb/usb.h>
  72 #include <bus/usb/usbhid.h>
  73 #include <bus/usb/usbdi.h>
  74 #include <bus/usb/usbdi_util.h>
  75 #include <bus/usb/usbdevs.h>
  76 #include <bus/usb/usb_quirks.h>
  77 #include <bus/usb/hid.h>
  78
  79 #include <sys/kbio.h>
  80 #include <dev/misc/kbd/kbdreg.h>
  81
  82 #define UKBD_EMULATE_ATSCANCODE 1
  83
  84 #define DRIVER_NAME     "ukbd"
  85
  86 #define delay(d)         DELAY(d)
  87
  88 #ifdef USB_DEBUG
  89 #define DPRINTF(x)      if (ukbddebug) logprintf x
  90 #define DPRINTFN(n,x)   if (ukbddebug>(n)) logprintf x
  91 int     ukbddebug = 0;
  92 SYSCTL_NODE(_hw_usb, OID_AUTO, ukbd, CTLFLAG_RW, 0, "USB ukbd");
  93 SYSCTL_INT(_hw_usb_ukbd, OID_AUTO, debug, CTLFLAG_RW,
  94            &ukbddebug, 0, "ukbd debug level");
  95 #else
  96 #define DPRINTF(x)
  97 #define DPRINTFN(n,x)
  98 #endif
  99
 100 #define UPROTO_BOOT_KEYBOARD 1
 101
 102 #define NKEYCODE 6
 103
 104 struct ukbd_data {
 105         u_int8_t        modifiers;
 106 #define MOD_CONTROL_L   0x01
 107 #define MOD_CONTROL_R   0x10
 108 #define MOD_SHIFT_L     0x02
 109 #define MOD_SHIFT_R     0x20
 110 #define MOD_ALT_L       0x04
 111 #define MOD_ALT_R       0x40
 112 #define MOD_WIN_L       0x08
 113 #define MOD_WIN_R       0x80
 114         u_int8_t        reserved;
 115         u_int8_t        keycode[NKEYCODE];
 116 };
 117
 118 #define MAXKEYS (NMOD+2*NKEYCODE)
 119
 120 typedef struct ukbd_softc {
 121         device_t                sc_dev;         /* base device */
 122 } ukbd_softc_t;
 123
 124 #define UKBD_CHUNK      128     /* chunk size for read */
 125 #define UKBD_BSIZE      1020    /* buffer size */
 126
 127 typedef void usbd_intr_t(usbd_xfer_handle, usbd_private_handle, usbd_status);
 128 typedef void usbd_disco_t(void *);
 129
 130 Static int              ukbd_resume(device_t self);
 131 Static usbd_intr_t      ukbd_intr;
 132 Static int              ukbd_driver_load(module_t mod, int what, void *arg);
 133 Static int              ukbd_default_term(keyboard_t *kbd);
 134
 135 Static keyboard_t       default_kbd;
 136
 137 USB_DECLARE_DRIVER_INIT(ukbd, DEVMETHOD(device_resume, ukbd_resume));
 138
 139 USB_MATCH(ukbd)
 140 {
 141         USB_MATCH_START(ukbd, uaa);
 142
 143         keyboard_switch_t *sw;
 144         void *arg[2];
 145         int unit = device_get_unit(self);
 146
 147         sw = kbd_get_switch(DRIVER_NAME);
 148         if (sw == NULL)
 149                 return (UMATCH_NONE);
 150
 151         arg[0] = (void *)uaa;
 152         arg[1] = (void *)ukbd_intr;
 153         if ((*sw->probe)(unit, (void *)arg, 0))
 154                 return (UMATCH_NONE);
 155
 156         return (UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO);
 157 }
 158
 159 USB_ATTACH(ukbd)
 160 {
 161         USB_ATTACH_START(ukbd, sc, uaa);
 162         usbd_interface_handle iface = uaa->iface;
 163         usb_interface_descriptor_t *id;
 164         char devinfo[1024];
 165
 166         keyboard_switch_t *sw;
 167         keyboard_t *kbd;
 168         void *arg[2];
 169         int unit = device_get_unit(self);
 170
 171         sw = kbd_get_switch(DRIVER_NAME);
 172         if (sw == NULL)
 173                 USB_ATTACH_ERROR_RETURN;
 174
 175         id = usbd_get_interface_descriptor(iface);
 176         usbd_devinfo(uaa->device, 0, devinfo);
 177         USB_ATTACH_SETUP;
 178         printf("%s: %s, iclass %d/%d\n", USBDEVNAME(sc->sc_dev),
 179                devinfo, id->bInterfaceClass, id->bInterfaceSubClass);
 180
 181         arg[0] = (void *)uaa;
 182         arg[1] = (void *)ukbd_intr;
 183         kbd = NULL;
 184         if ((*sw->probe)(unit, (void *)arg, 0))
 185                 USB_ATTACH_ERROR_RETURN;
 186         if ((*sw->init)(unit, &kbd, (void *)arg, 0))
 187                 USB_ATTACH_ERROR_RETURN;
 188         (*sw->enable)(kbd);
 189
 190 #ifdef KBD_INSTALL_CDEV
 191         if (kbd_attach(kbd))
 192                 USB_ATTACH_ERROR_RETURN;
 193 #endif
 194         if (bootverbose)
 195                 (*sw->diag)(kbd, bootverbose);
 196
 197         USB_ATTACH_SUCCESS_RETURN;
 198 }
 199
 200 int
 201 ukbd_detach(device_t self)
 202 {
 203         keyboard_t *kbd;
 204         int error;
 205
 206         kbd = kbd_get_keyboard(kbd_find_keyboard(DRIVER_NAME,
 207                                                  device_get_unit(self)));
 208         if (kbd == NULL) {
 209                 DPRINTF(("%s: keyboard not attached!?\n", USBDEVNAME(self)));
 210                 return ENXIO;
 211         }
 212         (*kbdsw[kbd->kb_index]->disable)(kbd);
 213
 214 #ifdef KBD_INSTALL_CDEV
 215         if (kbd != &default_kbd) {
 216                 error = kbd_detach(kbd);
 217                 if (error)
 218                         return error;
 219         }
 220 #endif
 221         if (kbd == &default_kbd) {
 222                 ukbd_default_term(kbd);
 223         } else {
 224                 error = (*kbdsw[kbd->kb_index]->term)(kbd);
 225                 if (error)
 226                         return error;
 227         }
 228
 229         DPRINTF(("%s: disconnected\n", USBDEVNAME(self)));
 230
 231         return (0);
 232 }
 233
 234 Static int
 235 ukbd_resume(device_t self)
 236 {
 237         keyboard_t *kbd;
 238
 239         kbd = kbd_get_keyboard(kbd_find_keyboard(DRIVER_NAME,
 240                                                  device_get_unit(self)));
 241         if (kbd)
 242                 (*kbdsw[kbd->kb_index]->clear_state)(kbd);
 243         return (0);
 244 }
 245
 246 void
 247 ukbd_intr(usbd_xfer_handle xfer, usbd_private_handle addr, usbd_status status)
 248 {
 249         keyboard_t *kbd = (keyboard_t *)addr;
 250
 251         (*kbdsw[kbd->kb_index]->intr)(kbd, (void *)status);
 252 }
 253
 254 DRIVER_MODULE(ukbd, uhub, ukbd_driver, ukbd_devclass, ukbd_driver_load, 0);
 255
 256
 257 #define UKBD_DEFAULT    0
 258
 259 #define KEY_ERROR       0x01
 260
 261 #define KEY_PRESS       0
 262 #define KEY_RELEASE     0x400
 263 #define KEY_INDEX(c)    ((c) & ~KEY_RELEASE)
 264
 265 #define SCAN_PRESS      0
 266 #define SCAN_RELEASE    0x80
 267 #define SCAN_PREFIX_E0  0x100
 268 #define SCAN_PREFIX_E1  0x200
 269 #define SCAN_PREFIX_CTL 0x400
 270 #define SCAN_PREFIX_SHIFT 0x800
 271 #define SCAN_PREFIX     (SCAN_PREFIX_E0 | SCAN_PREFIX_E1 | SCAN_PREFIX_CTL \
 272                          | SCAN_PREFIX_SHIFT)
 273 #define SCAN_CHAR(c)    ((c) & 0x7f)
 274
 275 #define NMOD 8
 276 Static struct {
 277         int mask, key;
 278 } ukbd_mods[NMOD] = {
 279         { MOD_CONTROL_L, 0xe0 },
 280         { MOD_CONTROL_R, 0xe4 },
 281         { MOD_SHIFT_L,   0xe1 },
 282         { MOD_SHIFT_R,   0xe5 },
 283         { MOD_ALT_L,     0xe2 },
 284         { MOD_ALT_R,     0xe6 },
 285         { MOD_WIN_L,     0xe3 },
 286         { MOD_WIN_R,     0xe7 },
 287 };
 288
 289 #define NN 0                    /* no translation */
 290 /*
 291  * Translate USB keycodes to AT keyboard scancodes.
 292  */
 293 /*
 294  * FIXME: Mac USB keyboard generates:
 295  * 0x53: keypad NumLock/Clear
 296  * 0x66: Power
 297  * 0x67: keypad =
 298  * 0x68: F13
 299  * 0x69: F14
 300  * 0x6a: F15
 301  */
 302 Static u_int8_t ukbd_trtab[256] = {
 303            0,   0,   0,   0,  30,  48,  46,  32, /* 00 - 07 */
 304           18,  33,  34,  35,  23,  36,  37,  38, /* 08 - 0F */
 305           50,  49,  24,  25,  16,  19,  31,  20, /* 10 - 17 */
 306           22,  47,  17,  45,  21,  44,   2,   3, /* 18 - 1F */
 307            4,   5,   6,   7,   8,   9,  10,  11, /* 20 - 27 */
 308           28,   1,  14,  15,  57,  12,  13,  26, /* 28 - 2F */
 309           27,  43,  43,  39,  40,  41,  51,  52, /* 30 - 37 */
 310           53,  58,  59,  60,  61,  62,  63,  64, /* 38 - 3F */
 311           65,  66,  67,  68,  87,  88,  92,  70, /* 40 - 47 */
 312          104, 102,  94,  96, 103,  99, 101,  98, /* 48 - 4F */
 313           97, 100,  95,  69,  91,  55,  74,  78, /* 50 - 57 */
 314           89,  79,  80,  81,  75,  76,  77,  71, /* 58 - 5F */
 315           72,  73,  82,  83,  86, 107,  NN,  NN, /* 60 - 67 */
 316           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* 68 - 6F */
 317           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* 70 - 77 */
 318           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* 78 - 7F */
 319           NN,  NN,  NN,  NN,  NN,  NN,  NN, 115, /* 80 - 87 */
 320          112, 125, 121, 123,  NN,  NN,  NN,  NN, /* 88 - 8F */
 321           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* 90 - 97 */
 322           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* 98 - 9F */
 323           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* A0 - A7 */
 324           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* A8 - AF */
 325           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* B0 - B7 */
 326           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* B8 - BF */
 327           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* C0 - C7 */
 328           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* C8 - CF */
 329           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* D0 - D7 */
 330           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* D8 - DF */
 331           29,  42,  56, 105,  90,  54,  93, 106, /* E0 - E7 */
 332           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* E8 - EF */
 333           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* F0 - F7 */
 334           NN,  NN,  NN,  NN,  NN,  NN,  NN,  NN, /* F8 - FF */
 335 };
 336
 337 typedef struct ukbd_state {
 338         usbd_interface_handle ks_iface; /* interface */
 339         usbd_pipe_handle ks_intrpipe;   /* interrupt pipe */
 340         struct usb_attach_arg *ks_uaa;
 341         int ks_ep_addr;
 342
 343         struct ukbd_data ks_ndata;
 344         struct ukbd_data ks_odata;
 345         u_long          ks_ntime[NKEYCODE];
 346         u_long          ks_otime[NKEYCODE];
 347
 348 #define INPUTBUFSIZE    (NMOD + 2*NKEYCODE)
 349         u_int           ks_input[INPUTBUFSIZE]; /* input buffer */
 350         int             ks_inputs;
 351         int             ks_inputhead;
 352         int             ks_inputtail;
 353
 354         int             ks_ifstate;
 355 #define INTRENABLED     (1 << 0)
 356 #define DISCONNECTED    (1 << 1)
 357
 358         struct callout ks_timeout;
 359
 360         int             ks_mode;        /* input mode (K_XLATE,K_RAW,K_CODE) */
 361         int             ks_flags;       /* flags */
 362 #define COMPOSE         (1 << 0)
 363         int             ks_polling;
 364         int             ks_state;       /* shift/lock key state */
 365         int             ks_accents;     /* accent key index (> 0) */
 366         u_int           ks_composed_char; /* composed char code (> 0) */
 367 #ifdef UKBD_EMULATE_ATSCANCODE
 368         u_int           ks_buffered_char[2];
 369 #endif
 370 } ukbd_state_t;
 371
 372 /* keyboard driver declaration */
 373 Static int              ukbd_configure(int flags);
 374 Static kbd_probe_t      ukbd_probe;
 375 Static kbd_init_t       ukbd_init;
 376 Static kbd_term_t       ukbd_term;
 377 Static kbd_intr_t       ukbd_interrupt;
 378 Static kbd_test_if_t    ukbd_test_if;
 379 Static kbd_enable_t     ukbd_enable;
 380 Static kbd_disable_t    ukbd_disable;
 381 Static kbd_read_t       ukbd_read;
 382 Static kbd_check_t      ukbd_check;
 383 Static kbd_read_char_t  ukbd_read_char;
 384 Static kbd_check_char_t ukbd_check_char;
 385 Static kbd_ioctl_t      ukbd_ioctl;
 386 Static kbd_lock_t       ukbd_lock;
 387 Static kbd_clear_state_t ukbd_clear_state;
 388 Static kbd_get_state_t  ukbd_get_state;
 389 Static kbd_set_state_t  ukbd_set_state;
 390 Static kbd_poll_mode_t  ukbd_poll;
 391
 392 keyboard_switch_t ukbdsw = {
 393         ukbd_probe,
 394         ukbd_init,
 395         ukbd_term,
 396         ukbd_interrupt,
 397         ukbd_test_if,
 398         ukbd_enable,
 399         ukbd_disable,
 400         ukbd_read,
 401         ukbd_check,
 402         ukbd_read_char,
 403         ukbd_check_char,
 404         ukbd_ioctl,
 405         ukbd_lock,
 406         ukbd_clear_state,
 407         ukbd_get_state,
 408         ukbd_set_state,
 409         genkbd_get_fkeystr,
 410         ukbd_poll,
 411         genkbd_diag,
 412 };
 413
 414 KEYBOARD_DRIVER(ukbd, ukbdsw, ukbd_configure);
 415
 416 /* local functions */
 417 Static int              ukbd_enable_intr(keyboard_t *kbd, int on,
 418                                          usbd_intr_t *func);
 419 Static timeout_t        ukbd_timeout;
 420
 421 Static int              ukbd_getc(ukbd_state_t *state);
 422 Static int              probe_keyboard(struct usb_attach_arg *uaa, int flags);
 423 Static int              init_keyboard(ukbd_state_t *state, int *type,
 424                                       int flags);
 425 Static void             set_leds(ukbd_state_t *state, int leds);
 426 Static int              set_typematic(keyboard_t *kbd, int code);
 427 #ifdef UKBD_EMULATE_ATSCANCODE
 428 Static int              keycode2scancode(int keycode, int shift, int up);
 429 #endif
 430
 431 /* local variables */
 432
 433 /* the initial key map, accent map and fkey strings */
 434 #if defined(UKBD_DFLT_KEYMAP) && !defined(KLD_MODULE)
 435 #define KBD_DFLT_KEYMAP
 436 #include "ukbdmap.h"
 437 #endif
 438 #include <dev/misc/kbd/kbdtables.h>
 439
 440 /* structures for the default keyboard */
 441 Static ukbd_state_t     default_kbd_state;
 442 Static keymap_t         default_keymap;
 443 Static accentmap_t      default_accentmap;
 444 Static fkeytab_t        default_fkeytab[NUM_FKEYS];
 445
 446 /*
 447  * The back door to the keyboard driver!
 448  * This function is called by the console driver, via the kbdio module,
 449  * to tickle keyboard drivers when the low-level console is being initialized.
 450  * Almost nothing in the kernel has been initialied yet.  Try to probe
 451  * keyboards if possible.
 452  * NOTE: because of the way the low-level conole is initialized, this routine
 453  * may be called more than once!!
 454  */
 455 Static int
 456 ukbd_configure(int flags)
 457 {
 458         return 0;
 459
 460 #if 0 /* not yet */
 461         keyboard_t *kbd;
 462         device_t device;
 463         struct usb_attach_arg *uaa;
 464         void *arg[2];
 465
 466         device = devclass_get_device(ukbd_devclass, UKBD_DEFAULT);
 467         if (device == NULL)
 468                 return 0;
 469         uaa = (struct usb_attach_arg *)device_get_ivars(device);
 470         if (uaa == NULL)
 471                 return 0;
 472
 473         /* probe the default keyboard */
 474         arg[0] = (void *)uaa;
 475         arg[1] = (void *)ukbd_intr;
 476         kbd = NULL;
 477         if (ukbd_probe(UKBD_DEFAULT, arg, flags))
 478                 return 0;
 479         if (ukbd_init(UKBD_DEFAULT, &kbd, arg, flags))
 480                 return 0;
 481
 482         /* return the number of found keyboards */
 483         return 1;
 484 #endif
 485 }
 486
 487 /* low-level functions */
 488
 489 /* detect a keyboard */
 490 Static int
 491 ukbd_probe(int unit, void *arg, int flags)
 492 {
 493         void **data;
 494         struct usb_attach_arg *uaa;
 495
 496         data = (void **)arg;
 497         uaa = (struct usb_attach_arg *)data[0];
 498
 499         if (unit == UKBD_DEFAULT) {
 500                 if (KBD_IS_PROBED(&default_kbd))
 501                         return 0;
 502         }
 503         if (probe_keyboard(uaa, flags))
 504                 return ENXIO;
 505         return 0;
 506 }
 507
 508 /*
 509  * Reset and initialize the device.  Note that unit 0 (UKBD_DEFAULT) is an
 510  * always-connected device once it has been initially detected.  We do not
 511  * deregister it if the usb keyboard is unplugged to avoid losing the
 512  * connection to the console.  This feature also handles the USB bus reset
 513  * which detaches and reattaches USB devices during boot.
 514  */
 515 Static int
 516 ukbd_init(int unit, keyboard_t **kbdp, void *arg, int flags)
 517 {
 518         keyboard_t *kbd;
 519         ukbd_state_t *state;
 520         keymap_t *keymap;
 521         accentmap_t *accmap;
 522         fkeytab_t *fkeymap;
 523         int fkeymap_size;
 524         void **data = (void **)arg;
 525         struct usb_attach_arg *uaa = (struct usb_attach_arg *)data[0];
 526
 527         if (unit == UKBD_DEFAULT) {
 528                 *kbdp = kbd = &default_kbd;
 529                 if (KBD_IS_INITIALIZED(kbd) && KBD_IS_CONFIGURED(kbd))
 530                         return 0;
 531                 state = &default_kbd_state;
 532                 keymap = &default_keymap;
 533                 accmap = &default_accentmap;
 534                 fkeymap = default_fkeytab;
 535                 fkeymap_size =
 536                         sizeof(default_fkeytab)/sizeof(default_fkeytab[0]);
 537         } else if (*kbdp == NULL) {
 538                 *kbdp = kbd = malloc(sizeof(*kbd), M_DEVBUF, M_INTWAIT | M_ZERO);
 539                 state = malloc(sizeof(*state), M_DEVBUF, M_INTWAIT);
 540                 keymap = malloc(sizeof(key_map), M_DEVBUF, M_INTWAIT);
 541                 accmap = malloc(sizeof(accent_map), M_DEVBUF, M_INTWAIT);
 542                 fkeymap = malloc(sizeof(fkey_tab), M_DEVBUF, M_INTWAIT);
 543                 fkeymap_size = sizeof(fkey_tab)/sizeof(fkey_tab[0]);
 544                 if ((state == NULL) || (keymap == NULL) || (accmap == NULL)
 545                      || (fkeymap == NULL)) {
 546                         if (state != NULL)
 547                                 free(state, M_DEVBUF);
 548                         if (keymap != NULL)
 549                                 free(keymap, M_DEVBUF);
 550                         if (accmap != NULL)
 551                                 free(accmap, M_DEVBUF);
 552                         if (fkeymap != NULL)
 553                                 free(fkeymap, M_DEVBUF);
 554                         free(kbd, M_DEVBUF);
 555                         return ENOMEM;
 556                 }
 557         } else if (KBD_IS_INITIALIZED(*kbdp) && KBD_IS_CONFIGURED(*kbdp)) {
 558                 return 0;
 559         } else {
 560                 kbd = *kbdp;
 561                 state = (ukbd_state_t *)kbd->kb_data;
 562                 keymap = kbd->kb_keymap;
 563                 accmap = kbd->kb_accentmap;
 564                 fkeymap = kbd->kb_fkeytab;
 565                 fkeymap_size = kbd->kb_fkeytab_size;
 566         }
 567
 568         if (!KBD_IS_PROBED(kbd)) {
 569                 if (KBD_IS_CONFIGURED(kbd)) {
 570                         kbd_reinit_struct(kbd, flags, KB_PRI_USB);
 571                 } else {
 572                         kbd_init_struct(kbd, DRIVER_NAME, KB_OTHER,
 573                                         unit, flags, KB_PRI_USB,
 574                                         0, 0);
 575                 }
 576                 bzero(state, sizeof(*state));
 577                 bcopy(&key_map, keymap, sizeof(key_map));
 578                 bcopy(&accent_map, accmap, sizeof(accent_map));
 579                 bcopy(fkey_tab, fkeymap,
 580                       imin(fkeymap_size*sizeof(fkeymap[0]), sizeof(fkey_tab)));
 581                 kbd_set_maps(kbd, keymap, accmap, fkeymap, fkeymap_size);
 582                 kbd->kb_data = (void *)state;
 583
 584                 if (probe_keyboard(uaa, flags))
 585                         return ENXIO;
 586                 else
 587                         KBD_FOUND_DEVICE(kbd);
 588                 ukbd_clear_state(kbd);
 589
 590                 /*
 591                  * Initialize the translation mode only if we are not
 592                  * reattaching to an already open keyboard (e.g. console).
 593                  * Otherwise we might rip the translation mode out from
 594                  * under X.
 595                  */
 596                 if (!KBD_IS_CONFIGURED(kbd))
 597                         state->ks_mode = K_XLATE;
 598                 state->ks_iface = uaa->iface;
 599                 state->ks_uaa = uaa;
 600                 state->ks_ifstate = 0;
 601                 callout_init(&state->ks_timeout);
 602                 /*
 603                  * FIXME: set the initial value for lock keys in ks_state
 604                  * according to the BIOS data?
 605                  */
 606                 KBD_PROBE_DONE(kbd);
 607         }
 608         if (!KBD_IS_INITIALIZED(kbd) && !(flags & KB_CONF_PROBE_ONLY)) {
 609                 if (KBD_HAS_DEVICE(kbd)
 610                     && init_keyboard((ukbd_state_t *)kbd->kb_data,
 611                                      &kbd->kb_type, kbd->kb_flags))
 612                         return ENXIO;
 613                 ukbd_ioctl(kbd, KDSETLED, (caddr_t)&(state->ks_state));
 614         }
 615         if (!KBD_IS_CONFIGURED(kbd)) {
 616                 if (kbd_register(kbd) < 0)
 617                         return ENXIO;
 618                 KBD_CONFIG_DONE(kbd);
 619         }
 620         if (!KBD_IS_INITIALIZED(kbd) && !(flags & KB_CONF_PROBE_ONLY)) {
 621                 if (ukbd_enable_intr(kbd, TRUE, (usbd_intr_t *)data[1]) == 0)
 622                         ukbd_timeout((void *)kbd);
 623                 KBD_INIT_DONE(kbd);
 624         }
 625         return 0;
 626 }
 627
 628 Static int
 629 ukbd_enable_intr(keyboard_t *kbd, int on, usbd_intr_t *func)
 630 {
 631         ukbd_state_t *state = (ukbd_state_t *)kbd->kb_data;
 632         usbd_status err;
 633
 634         if (on) {
 635                 /* Set up interrupt pipe. */
 636                 if (state->ks_ifstate & INTRENABLED)
 637                         return EBUSY;
 638
 639                 state->ks_ifstate |= INTRENABLED;
 640                 err = usbd_open_pipe_intr(state->ks_iface, state->ks_ep_addr,
 641                                         USBD_SHORT_XFER_OK,
 642                                         &state->ks_intrpipe, kbd,
 643                                         &state->ks_ndata,
 644                                         sizeof(state->ks_ndata), func,
 645                                         USBD_DEFAULT_INTERVAL);
 646                 if (err)
 647                         return (EIO);
 648         } else {
 649                 /* Disable interrupts. */
 650                 usbd_abort_pipe(state->ks_intrpipe);
 651                 usbd_close_pipe(state->ks_intrpipe);
 652
 653                 state->ks_ifstate &= ~INTRENABLED;
 654         }
 655
 656         return (0);
 657 }
 658
 659 /* finish using this keyboard */
 660 Static int
 661 ukbd_term(keyboard_t *kbd)
 662 {
 663         ukbd_state_t *state;
 664         int error;
 665
 666         crit_enter();
 667         state = (ukbd_state_t *)kbd->kb_data;
 668         DPRINTF(("ukbd_term: ks_ifstate=0x%x\n", state->ks_ifstate));
 669
 670         callout_stop(&state->ks_timeout);
 671
 672         if (state->ks_ifstate & INTRENABLED)
 673                 ukbd_enable_intr(kbd, FALSE, NULL);
 674         if (state->ks_ifstate & INTRENABLED) {
 675                 crit_exit();
 676                 DPRINTF(("ukbd_term: INTRENABLED!\n"));
 677                 return ENXIO;
 678         }
 679
 680         error = kbd_unregister(kbd);
 681         DPRINTF(("ukbd_term: kbd_unregister() %d\n", error));
 682         if (error == 0) {
 683                 kbd->kb_flags = 0;
 684                 if (kbd != &default_kbd) {
 685                         free(kbd->kb_keymap, M_DEVBUF);
 686                         free(kbd->kb_accentmap, M_DEVBUF);
 687                         free(kbd->kb_fkeytab, M_DEVBUF);
 688                         free(state, M_DEVBUF);
 689                         free(kbd, M_DEVBUF);
 690                 }
 691         }
 692         crit_exit();
 693         return error;
 694 }
 695
 696 /*
 697  * Finish using the default keyboard.  Shutdown the USB side of the keyboard
 698  * but do not unregister it.
 699  */
 700 Static int
 701 ukbd_default_term(keyboard_t *kbd)
 702 {
 703         ukbd_state_t *state;
 704
 705         crit_enter();
 706
 707         state = (ukbd_state_t *)kbd->kb_data;
 708         DPRINTF(("ukbd_default_term: ks_ifstate=0x%x\n", state->ks_ifstate));
 709
 710         callout_stop(&state->ks_timeout);
 711
 712         if (state->ks_ifstate & INTRENABLED)
 713                 ukbd_enable_intr(kbd, FALSE, NULL);
 714         if (state->ks_ifstate & INTRENABLED) {
 715                 crit_exit();
 716                 DPRINTF(("ukbd_term: INTRENABLED!\n"));
 717                 return ENXIO;
 718         }
 719         KBD_LOST_DEVICE(kbd);
 720         KBD_LOST_PROBE(kbd);
 721         KBD_LOST_INIT(kbd);
 722         crit_exit();
 723         return (0);
 724 }
 725
 726 /* keyboard interrupt routine */
 727
 728 Static void
 729 ukbd_timeout(void *arg)
 730 {
 731         keyboard_t *kbd;
 732         ukbd_state_t *state;
 733
 734         kbd = (keyboard_t *)arg;
 735         state = (ukbd_state_t *)kbd->kb_data;
 736         crit_enter();
 737         (*kbdsw[kbd->kb_index]->intr)(kbd, (void *)USBD_NORMAL_COMPLETION);
 738         callout_reset(&state->ks_timeout, hz / 40, ukbd_timeout, arg);
 739         crit_exit();
 740 }
 741
 742 Static int
 743 ukbd_interrupt(keyboard_t *kbd, void *arg)
 744 {
 745         usbd_status status = (usbd_status)arg;
 746         ukbd_state_t *state;
 747         struct ukbd_data *ud;
 748         struct timeval tv;
 749         u_long now;
 750         int mod, omod;
 751         int key, c;
 752         int i, j;
 753
 754         DPRINTFN(5, ("ukbd_intr: status=%d\n", status));
 755         if (status == USBD_CANCELLED)
 756                 return 0;
 757
 758         state = (ukbd_state_t *)kbd->kb_data;
 759         ud = &state->ks_ndata;
 760
 761         if (status != USBD_NORMAL_COMPLETION) {
 762                 DPRINTF(("ukbd_intr: status=%d\n", status));
 763                 if (status == USBD_STALLED)
 764                     usbd_clear_endpoint_stall_async(state->ks_intrpipe);
 765                 return 0;
 766         }
 767
 768         if (ud->keycode[0] == KEY_ERROR)
 769                 return 0;               /* ignore  */
 770
 771         getmicrouptime(&tv);
 772         now = (u_long)tv.tv_sec*1000 + (u_long)tv.tv_usec/1000;
 773
 774 #define ADDKEY1(c)              \
 775         if (state->ks_inputs < INPUTBUFSIZE) {                          \
 776                 state->ks_input[state->ks_inputtail] = (c);             \
 777                 ++state->ks_inputs;                                     \
 778                 state->ks_inputtail = (state->ks_inputtail + 1)%INPUTBUFSIZE; \
 779         }
 780
 781         mod = ud->modifiers;
 782         omod = state->ks_odata.modifiers;
 783         if (mod != omod) {
 784                 for (i = 0; i < NMOD; i++)
 785                         if (( mod & ukbd_mods[i].mask) !=
 786                             (omod & ukbd_mods[i].mask))
 787                                 ADDKEY1(ukbd_mods[i].key |
 788                                        (mod & ukbd_mods[i].mask
 789                                           ? KEY_PRESS : KEY_RELEASE));
 790         }
 791
 792         /* Check for released keys. */
 793         for (i = 0; i < NKEYCODE; i++) {
 794                 key = state->ks_odata.keycode[i];
 795                 if (key == 0)
 796                         continue;
 797                 for (j = 0; j < NKEYCODE; j++) {
 798                         if (ud->keycode[j] == 0)
 799                                 continue;
 800                         if (key == ud->keycode[j])
 801                                 goto rfound;
 802                 }
 803                 ADDKEY1(key | KEY_RELEASE);
 804         rfound:
 805                 ;
 806         }
 807
 808         /* Check for pressed keys. */
 809         for (i = 0; i < NKEYCODE; i++) {
 810                 key = ud->keycode[i];
 811                 if (key == 0)
 812                         continue;
 813                 state->ks_ntime[i] = now + kbd->kb_delay1;
 814                 for (j = 0; j < NKEYCODE; j++) {
 815                         if (state->ks_odata.keycode[j] == 0)
 816                                 continue;
 817                         if (key == state->ks_odata.keycode[j]) {
 818                                 state->ks_ntime[i] = state->ks_otime[j];
 819                                 if (state->ks_otime[j] > now)
 820                                         goto pfound;
 821                                 state->ks_ntime[i] = now + kbd->kb_delay2;
 822                                 break;
 823                         }
 824                 }
 825                 ADDKEY1(key | KEY_PRESS);
 826         pfound:
 827                 ;
 828         }
 829
 830         state->ks_odata = *ud;
 831         bcopy(state->ks_ntime, state->ks_otime, sizeof(state->ks_ntime));
 832         if (state->ks_inputs <= 0)
 833                 return 0;
 834
 835 #ifdef USB_DEBUG
 836         for (i = state->ks_inputhead, j = 0; j < state->ks_inputs; ++j,
 837                 i = (i + 1)%INPUTBUFSIZE) {
 838                 c = state->ks_input[i];
 839                 DPRINTF(("0x%x (%d) %s\n", c, c,
 840                         (c & KEY_RELEASE) ? "released":"pressed"));
 841         }
 842         if (ud->modifiers)
 843                 DPRINTF(("mod:0x%04x ", ud->modifiers));
 844         for (i = 0; i < NKEYCODE; i++) {
 845                 if (ud->keycode[i])
 846                         DPRINTF(("%d ", ud->keycode[i]));
 847         }
 848         DPRINTF(("\n"));
 849 #endif /* USB_DEBUG */
 850
 851         if (state->ks_polling)
 852                 return 0;
 853
 854         if (KBD_IS_ACTIVE(kbd) && KBD_IS_BUSY(kbd)) {
 855                 /* let the callback function to process the input */
 856                 (*kbd->kb_callback.kc_func)(kbd, KBDIO_KEYINPUT,
 857                                             kbd->kb_callback.kc_arg);
 858         } else {
 859                 /* read and discard the input; no one is waiting for it */
 860                 do {
 861                         c = ukbd_read_char(kbd, FALSE);
 862                 } while (c != NOKEY);
 863         }
 864
 865         return 0;
 866 }
 867
 868 Static int
 869 ukbd_getc(ukbd_state_t *state)
 870 {
 871         int c;
 872
 873         if (state->ks_polling) {
 874                 DPRINTFN(1,("ukbd_getc: polling\n"));
 875                 crit_enter();
 876                 while (state->ks_inputs <= 0)
 877                         usbd_dopoll(state->ks_iface);
 878                 crit_exit();
 879         }
 880         crit_enter();
 881         if (state->ks_inputs <= 0) {
 882                 c = -1;
 883         } else {
 884                 c = state->ks_input[state->ks_inputhead];
 885                 --state->ks_inputs;
 886                 state->ks_inputhead = (state->ks_inputhead + 1)%INPUTBUFSIZE;
 887         }
 888         crit_exit();
 889         return c;
 890 }
 891
 892 /* test the interface to the device */
 893 Static int
 894 ukbd_test_if(keyboard_t *kbd)
 895 {
 896         return 0;
 897 }
 898
 899 /*
 900  * Enable the access to the device; until this function is called,
 901  * the client cannot read from the keyboard.
 902  */
 903 Static int
 904 ukbd_enable(keyboard_t *kbd)
 905 {
 906         crit_enter();
 907         KBD_ACTIVATE(kbd);
 908         crit_exit();
 909         return 0;
 910 }
 911
 912 /* disallow the access to the device */
 913 Static int
 914 ukbd_disable(keyboard_t *kbd)
 915 {
 916         crit_enter();
 917         KBD_DEACTIVATE(kbd);
 918         crit_exit();
 919         return 0;
 920 }
 921
 922 /* read one byte from the keyboard if it's allowed */
 923 Static int
 924 ukbd_read(keyboard_t *kbd, int wait)
 925 {
 926         ukbd_state_t *state;
 927         int usbcode;
 928 #ifdef UKBD_EMULATE_ATSCANCODE
 929         int keycode;
 930         int scancode;
 931 #endif
 932
 933         state = (ukbd_state_t *)kbd->kb_data;
 934 #ifdef UKBD_EMULATE_ATSCANCODE
 935         if (state->ks_buffered_char[0]) {
 936                 scancode = state->ks_buffered_char[0];
 937                 if (scancode & SCAN_PREFIX) {
 938                         state->ks_buffered_char[0] = scancode & ~SCAN_PREFIX;
 939                         return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1);
 940                 } else {
 941                         state->ks_buffered_char[0] = state->ks_buffered_char[1];
 942                         state->ks_buffered_char[1] = 0;
 943                         return scancode;
 944                 }
 945         }
 946 #endif /* UKBD_EMULATE_ATSCANCODE */
 947
 948         /* XXX */
 949         usbcode = ukbd_getc(state);
 950         if (!KBD_IS_ACTIVE(kbd) || !KBD_HAS_DEVICE(kbd) || (usbcode == -1))
 951                 return -1;
 952         ++kbd->kb_count;
 953 #ifdef UKBD_EMULATE_ATSCANCODE
 954         keycode = ukbd_trtab[KEY_INDEX(usbcode)];
 955         if (keycode == NN)
 956                 return -1;
 957
 958         scancode = keycode2scancode(keycode, state->ks_ndata.modifiers,
 959                                     usbcode & KEY_RELEASE);
 960         if (scancode & SCAN_PREFIX) {
 961                 if (scancode & SCAN_PREFIX_CTL) {
 962                         state->ks_buffered_char[0] =
 963                                 0x1d | (scancode & SCAN_RELEASE); /* Ctrl */
 964                         state->ks_buffered_char[1] = scancode & ~SCAN_PREFIX;
 965                 } else if (scancode & SCAN_PREFIX_SHIFT) {
 966                         state->ks_buffered_char[0] =
 967                                 0x2a | (scancode & SCAN_RELEASE); /* Shift */
 968                         state->ks_buffered_char[1] =
 969                                 scancode & ~SCAN_PREFIX_SHIFT;
 970                 } else {
 971                         state->ks_buffered_char[0] = scancode & ~SCAN_PREFIX;
 972                         state->ks_buffered_char[1] = 0;
 973                 }
 974                 return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1);
 975         }
 976         return scancode;
 977 #else /* !UKBD_EMULATE_ATSCANCODE */
 978         return usbcode;
 979 #endif /* UKBD_EMULATE_ATSCANCODE */
 980 }
 981
 982 /* check if data is waiting */
 983 Static int
 984 ukbd_check(keyboard_t *kbd)
 985 {
 986         if (!KBD_IS_ACTIVE(kbd) || !KBD_HAS_DEVICE(kbd))
 987                 return FALSE;
 988 #ifdef UKBD_EMULATE_ATSCANCODE
 989         if (((ukbd_state_t *)kbd->kb_data)->ks_buffered_char[0])
 990                 return TRUE;
 991 #endif
 992         if (((ukbd_state_t *)kbd->kb_data)->ks_inputs > 0)
 993                 return TRUE;
 994         return FALSE;
 995 }
 996
 997 /* read char from the keyboard */
 998 Static u_int
 999 ukbd_read_char(keyboard_t *kbd, int wait)
1000 {
1001         ukbd_state_t *state;
1002         u_int action;
1003         int usbcode;
1004         int keycode;
1005 #ifdef UKBD_EMULATE_ATSCANCODE
1006         int scancode;
1007 #endif
1008
1009         state = (ukbd_state_t *)kbd->kb_data;
1010 next_code:
1011         /* do we have a composed char to return? */
1012         if (!(state->ks_flags & COMPOSE) && (state->ks_composed_char > 0)) {
1013                 action = state->ks_composed_char;
1014                 state->ks_composed_char = 0;
1015                 if (action > UCHAR_MAX)
1016                         return ERRKEY;
1017                 return action;
1018         }
1019
1020 #ifdef UKBD_EMULATE_ATSCANCODE
1021         /* do we have a pending raw scan code? */
1022         if (state->ks_mode == K_RAW) {
1023                 if (state->ks_buffered_char[0]) {
1024                         scancode = state->ks_buffered_char[0];
1025                         if (scancode & SCAN_PREFIX) {
1026                                 state->ks_buffered_char[0] =
1027                                         scancode & ~SCAN_PREFIX;
1028                                 return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1);
1029                         } else {
1030                                 state->ks_buffered_char[0] =
1031                                         state->ks_buffered_char[1];
1032                                 state->ks_buffered_char[1] = 0;
1033                                 return scancode;
1034                         }
1035                 }
1036         }
1037 #endif /* UKBD_EMULATE_ATSCANCODE */
1038
1039         /* see if there is something in the keyboard port */
1040         /* XXX */
1041         usbcode = ukbd_getc(state);
1042         if (usbcode == -1)
1043                 return NOKEY;
1044         ++kbd->kb_count;
1045
1046 #ifdef UKBD_EMULATE_ATSCANCODE
1047         /* USB key index -> key code -> AT scan code */
1048         keycode = ukbd_trtab[KEY_INDEX(usbcode)];
1049         if (keycode == NN)
1050                 return NOKEY;
1051
1052         /* return an AT scan code for the K_RAW mode */
1053         if (state->ks_mode == K_RAW) {
1054                 scancode = keycode2scancode(keycode, state->ks_ndata.modifiers,
1055                                             usbcode & KEY_RELEASE);
1056                 if (scancode & SCAN_PREFIX) {
1057                         if (scancode & SCAN_PREFIX_CTL) {
1058                                 state->ks_buffered_char[0] =
1059                                         0x1d | (scancode & SCAN_RELEASE);
1060                                 state->ks_buffered_char[1] =
1061                                         scancode & ~SCAN_PREFIX;
1062                         } else if (scancode & SCAN_PREFIX_SHIFT) {
1063                                 state->ks_buffered_char[0] =
1064                                         0x2a | (scancode & SCAN_RELEASE);
1065                                 state->ks_buffered_char[1] =
1066                                         scancode & ~SCAN_PREFIX_SHIFT;
1067                         } else {
1068                                 state->ks_buffered_char[0] =
1069                                         scancode & ~SCAN_PREFIX;
1070                                 state->ks_buffered_char[1] = 0;
1071                         }
1072                         return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1);
1073                 }
1074                 return scancode;
1075         }
1076 #else /* !UKBD_EMULATE_ATSCANCODE */
1077         /* return the byte as is for the K_RAW mode */
1078         if (state->ks_mode == K_RAW)
1079                 return usbcode;
1080
1081         /* USB key index -> key code */
1082         keycode = ukbd_trtab[KEY_INDEX(usbcode)];
1083         if (keycode == NN)
1084                 return NOKEY;
1085 #endif /* UKBD_EMULATE_ATSCANCODE */
1086
1087         switch (keycode) {
1088         case 0x38:      /* left alt (compose key) */
1089                 if (usbcode & KEY_RELEASE) {
1090                         if (state->ks_flags & COMPOSE) {
1091                                 state->ks_flags &= ~COMPOSE;
1092                                 if (state->ks_composed_char > UCHAR_MAX)
1093                                         state->ks_composed_char = 0;
1094                         }
1095                 } else {
1096                         if (!(state->ks_flags & COMPOSE)) {
1097                                 state->ks_flags |= COMPOSE;
1098                                 state->ks_composed_char = 0;
1099                         }
1100                 }
1101                 break;
1102         /* XXX: I don't like these... */
1103         case 0x5c:      /* print screen */
1104                 if (state->ks_flags & ALTS)
1105                         keycode = 0x54; /* sysrq */
1106                 break;
1107         case 0x68:      /* pause/break */
1108                 if (state->ks_flags & CTLS)
1109                         keycode = 0x6c; /* break */
1110                 break;
1111         }
1112
1113         /* return the key code in the K_CODE mode */
1114         if (usbcode & KEY_RELEASE)
1115                 keycode |= SCAN_RELEASE;
1116         if (state->ks_mode == K_CODE)
1117                 return keycode;
1118
1119         /* compose a character code */
1120         if (state->ks_flags & COMPOSE) {
1121                 switch (keycode) {
1122                 /* key pressed, process it */
1123                 case 0x47: case 0x48: case 0x49:        /* keypad 7,8,9 */
1124                         state->ks_composed_char *= 10;
1125                         state->ks_composed_char += keycode - 0x40;
1126                         if (state->ks_composed_char > UCHAR_MAX)
1127                                 return ERRKEY;
1128                         goto next_code;
1129                 case 0x4B: case 0x4C: case 0x4D:        /* keypad 4,5,6 */
1130                         state->ks_composed_char *= 10;
1131                         state->ks_composed_char += keycode - 0x47;
1132                         if (state->ks_composed_char > UCHAR_MAX)
1133                                 return ERRKEY;
1134                         goto next_code;
1135                 case 0x4F: case 0x50: case 0x51:        /* keypad 1,2,3 */
1136                         state->ks_composed_char *= 10;
1137                         state->ks_composed_char += keycode - 0x4E;
1138                         if (state->ks_composed_char > UCHAR_MAX)
1139                                 return ERRKEY;
1140                         goto next_code;
1141                 case 0x52:                              /* keypad 0 */
1142                         state->ks_composed_char *= 10;
1143                         if (state->ks_composed_char > UCHAR_MAX)
1144                                 return ERRKEY;
1145                         goto next_code;
1146
1147                 /* key released, no interest here */
1148                 case SCAN_RELEASE | 0x47:
1149                 case SCAN_RELEASE | 0x48:
1150                 case SCAN_RELEASE | 0x49:               /* keypad 7,8,9 */
1151                 case SCAN_RELEASE | 0x4B:
1152                 case SCAN_RELEASE | 0x4C:
1153                 case SCAN_RELEASE | 0x4D:               /* keypad 4,5,6 */
1154                 case SCAN_RELEASE | 0x4F:
1155                 case SCAN_RELEASE | 0x50:
1156                 case SCAN_RELEASE | 0x51:               /* keypad 1,2,3 */
1157                 case SCAN_RELEASE | 0x52:               /* keypad 0 */
1158                         goto next_code;
1159
1160                 case 0x38:                              /* left alt key */
1161                         break;
1162
1163                 default:
1164                         if (state->ks_composed_char > 0) {
1165                                 state->ks_flags &= ~COMPOSE;
1166                                 state->ks_composed_char = 0;
1167                                 return ERRKEY;
1168                         }
1169                         break;
1170                 }
1171         }
1172
1173         /* keycode to key action */
1174         action = genkbd_keyaction(kbd, SCAN_CHAR(keycode),
1175                                   keycode & SCAN_RELEASE, &state->ks_state,
1176                                   &state->ks_accents);
1177         if (action == NOKEY)
1178                 goto next_code;
1179         else
1180                 return action;
1181 }
1182
1183 /* check if char is waiting */
1184 Static int
1185 ukbd_check_char(keyboard_t *kbd)
1186 {
1187         ukbd_state_t *state;
1188
1189         if (!KBD_IS_ACTIVE(kbd) || !KBD_HAS_DEVICE(kbd))
1190                 return FALSE;
1191         state = (ukbd_state_t *)kbd->kb_data;
1192         if (!(state->ks_flags & COMPOSE) && (state->ks_composed_char > 0))
1193                 return TRUE;
1194         if (state->ks_inputs > 0)
1195                 return TRUE;
1196         return FALSE;
1197 }
1198
1199 /* some useful control functions */
1200 Static int
1201 ukbd_ioctl(keyboard_t *kbd, u_long cmd, caddr_t arg)
1202 {
1203         /* trasnlate LED_XXX bits into the device specific bits */
1204         static u_char ledmap[8] = {
1205                 0, 2, 1, 3, 4, 6, 5, 7,
1206         };
1207         ukbd_state_t *state = kbd->kb_data;
1208         int i;
1209
1210         crit_enter();
1211         switch (cmd) {
1212         case KDGKBMODE:         /* get keyboard mode */
1213                 *(int *)arg = state->ks_mode;
1214                 break;
1215         case KDSKBMODE:         /* set keyboard mode */
1216                 switch (*(int *)arg) {
1217                 case K_XLATE:
1218                         if (state->ks_mode != K_XLATE) {
1219                                 /* make lock key state and LED state match */
1220                                 state->ks_state &= ~LOCK_MASK;
1221                                 state->ks_state |= KBD_LED_VAL(kbd);
1222                         }
1223                         /* FALLTHROUGH */
1224                 case K_RAW:
1225                 case K_CODE:
1226                         if (state->ks_mode != *(int *)arg) {
1227                                 ukbd_clear_state(kbd);
1228                                 state->ks_mode = *(int *)arg;
1229                         }
1230                         break;
1231                 default:
1232                         crit_exit();
1233                         return EINVAL;
1234                 }
1235                 break;
1236
1237         case KDGETLED:          /* get keyboard LED */
1238                 *(int *)arg = KBD_LED_VAL(kbd);
1239                 break;
1240         case KDSETLED:          /* set keyboard LED */
1241                 /* NOTE: lock key state in ks_state won't be changed */
1242                 if (*(int *)arg & ~LOCK_MASK) {
1243                         crit_exit();
1244                         return EINVAL;
1245                 }
1246                 i = *(int *)arg;
1247                 /* replace CAPS LED with ALTGR LED for ALTGR keyboards */
1248                 if (kbd->kb_keymap->n_keys > ALTGR_OFFSET) {
1249                         if (i & ALKED)
1250                                 i |= CLKED;
1251                         else
1252                                 i &= ~CLKED;
1253                 }
1254                 if (KBD_HAS_DEVICE(kbd)) {
1255                         set_leds(state, ledmap[i & LED_MASK]);
1256                         /* XXX: error check? */
1257                 }
1258                 KBD_LED_VAL(kbd) = *(int *)arg;
1259                 break;
1260
1261         case KDGKBSTATE:        /* get lock key state */
1262                 *(int *)arg = state->ks_state & LOCK_MASK;
1263                 break;
1264         case KDSKBSTATE:        /* set lock key state */
1265                 if (*(int *)arg & ~LOCK_MASK) {
1266                         crit_exit();
1267                         return EINVAL;
1268                 }
1269                 state->ks_state &= ~LOCK_MASK;
1270                 state->ks_state |= *(int *)arg;
1271                 crit_exit();
1272                 /* set LEDs and quit */
1273                 return ukbd_ioctl(kbd, KDSETLED, arg);
1274
1275         case KDSETREPEAT:       /* set keyboard repeat rate (new interface) */
1276                 crit_exit();
1277                 if (!KBD_HAS_DEVICE(kbd))
1278                         return 0;
1279                 if (((int *)arg)[1] < 0)
1280                         return EINVAL;
1281                 if (((int *)arg)[0] < 0)
1282                         return EINVAL;
1283                 else if (((int *)arg)[0] == 0)  /* fastest possible value */
1284                         kbd->kb_delay1 = 200;
1285                 else
1286                         kbd->kb_delay1 = ((int *)arg)[0];
1287                 kbd->kb_delay2 = ((int *)arg)[1];
1288                 return 0;
1289
1290         case KDSETRAD:          /* set keyboard repeat rate (old interface) */
1291                 crit_exit();
1292                 return set_typematic(kbd, *(int *)arg);
1293
1294         case PIO_KEYMAP:        /* set keyboard translation table */
1295         case PIO_KEYMAPENT:     /* set keyboard translation table entry */
1296         case PIO_DEADKEYMAP:    /* set accent key translation table */
1297                 state->ks_accents = 0;
1298                 /* FALLTHROUGH */
1299         default:
1300                 crit_exit();
1301                 return genkbd_commonioctl(kbd, cmd, arg);
1302
1303 #ifdef USB_DEBUG
1304         case USB_SETDEBUG:
1305                 ukbddebug = *(int *)arg;
1306                 break;
1307 #endif
1308         }
1309
1310         crit_exit();
1311         return 0;
1312 }
1313
1314 /* lock the access to the keyboard */
1315 Static int
1316 ukbd_lock(keyboard_t *kbd, int lock)
1317 {
1318         /* XXX ? */
1319         return TRUE;
1320 }
1321
1322 /* clear the internal state of the keyboard */
1323 Static void
1324 ukbd_clear_state(keyboard_t *kbd)
1325 {
1326         ukbd_state_t *state;
1327
1328         state = (ukbd_state_t *)kbd->kb_data;
1329         state->ks_flags = 0;
1330         state->ks_polling = 0;
1331         state->ks_state &= LOCK_MASK;   /* preserve locking key state */
1332         state->ks_accents = 0;
1333         state->ks_composed_char = 0;
1334 #ifdef UKBD_EMULATE_ATSCANCODE
1335         state->ks_buffered_char[0] = 0;
1336         state->ks_buffered_char[1] = 0;
1337 #endif
1338         bzero(&state->ks_ndata, sizeof(state->ks_ndata));
1339         bzero(&state->ks_odata, sizeof(state->ks_odata));
1340         bzero(&state->ks_ntime, sizeof(state->ks_ntime));
1341         bzero(&state->ks_otime, sizeof(state->ks_otime));
1342 }
1343
1344 /* save the internal state */
1345 Static int
1346 ukbd_get_state(keyboard_t *kbd, void *buf, size_t len)
1347 {
1348         if (len == 0)
1349                 return sizeof(ukbd_state_t);
1350         if (len < sizeof(ukbd_state_t))
1351                 return -1;
1352         bcopy(kbd->kb_data, buf, sizeof(ukbd_state_t));
1353         return 0;
1354 }
1355
1356 /* set the internal state */
1357 Static int
1358 ukbd_set_state(keyboard_t *kbd, void *buf, size_t len)
1359 {
1360         if (len < sizeof(ukbd_state_t))
1361                 return ENOMEM;
1362         bcopy(buf, kbd->kb_data, sizeof(ukbd_state_t));
1363         return 0;
1364 }
1365
1366 Static int
1367 ukbd_poll(keyboard_t *kbd, int on)
1368 {
1369         ukbd_state_t *state;
1370         usbd_device_handle dev;
1371
1372         state = (ukbd_state_t *)kbd->kb_data;
1373         usbd_interface2device_handle(state->ks_iface, &dev);
1374
1375         crit_enter();
1376         if (on) {
1377                 if (state->ks_polling == 0)
1378                         usbd_set_polling(dev, on);
1379                 ++state->ks_polling;
1380         } else {
1381                 --state->ks_polling;
1382                 if (state->ks_polling == 0)
1383                         usbd_set_polling(dev, on);
1384         }
1385         crit_exit();
1386         return 0;
1387 }
1388
1389 /* local functions */
1390
1391 Static int
1392 probe_keyboard(struct usb_attach_arg *uaa, int flags)
1393 {
1394         usb_interface_descriptor_t *id;
1395
1396         if (!uaa->iface)        /* we attach to ifaces only */
1397                 return EINVAL;
1398
1399         /* Check that this is a keyboard that speaks the boot protocol. */
1400         id = usbd_get_interface_descriptor(uaa->iface);
1401         if (id
1402             && id->bInterfaceClass == UICLASS_HID
1403             && id->bInterfaceSubClass == UISUBCLASS_BOOT
1404             && id->bInterfaceProtocol == UPROTO_BOOT_KEYBOARD)
1405                 return 0;       /* found it */
1406
1407         return EINVAL;
1408 }
1409
1410 Static int
1411 init_keyboard(ukbd_state_t *state, int *type, int flags)
1412 {
1413         usb_endpoint_descriptor_t *ed;
1414         usbd_status err;
1415
1416         *type = KB_OTHER;
1417
1418         state->ks_ifstate |= DISCONNECTED;
1419
1420         ed = usbd_interface2endpoint_descriptor(state->ks_iface, 0);
1421         if (!ed) {
1422                 printf("ukbd: could not read endpoint descriptor\n");
1423                 return EIO;
1424         }
1425
1426         DPRINTFN(10,("ukbd:init_keyboard: \
1427 bLength=%d bDescriptorType=%d bEndpointAddress=%d-%s bmAttributes=%d wMaxPacketSize=%d bInterval=%d\n",
1428                ed->bLength, ed->bDescriptorType,
1429                UE_GET_ADDR(ed->bEndpointAddress),
1430                UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN ? "in":"out",
1431                UE_GET_XFERTYPE(ed->bmAttributes),
1432                UGETW(ed->wMaxPacketSize), ed->bInterval));
1433
1434         if (UE_GET_DIR(ed->bEndpointAddress) != UE_DIR_IN ||
1435             UE_GET_XFERTYPE(ed->bmAttributes) != UE_INTERRUPT) {
1436                 printf("ukbd: unexpected endpoint\n");
1437                 return EINVAL;
1438         }
1439
1440         if ((usbd_get_quirks(state->ks_uaa->device)->uq_flags & UQ_NO_SET_PROTO) == 0) {
1441                 err = usbd_set_protocol(state->ks_iface, 0);
1442                 DPRINTFN(5, ("ukbd:init_keyboard: protocol set\n"));
1443                 if (err) {
1444                         printf("ukbd: set protocol failed\n");
1445                         return EIO;
1446                 }
1447         }
1448         /* Ignore if SETIDLE fails since it is not crucial. */
1449         usbd_set_idle(state->ks_iface, 0, 0);
1450
1451         state->ks_ep_addr = ed->bEndpointAddress;
1452         state->ks_ifstate &= ~DISCONNECTED;
1453
1454         return 0;
1455 }
1456
1457 Static void
1458 set_leds(ukbd_state_t *state, int leds)
1459 {
1460         u_int8_t res = leds;
1461
1462         DPRINTF(("ukbd:set_leds: state=%p leds=%d\n", state, leds));
1463
1464         usbd_set_report_async(state->ks_iface, UHID_OUTPUT_REPORT, 0, &res, 1);
1465 }
1466
1467 Static int
1468 set_typematic(keyboard_t *kbd, int code)
1469 {
1470         static int delays[] = { 250, 500, 750, 1000 };
1471         static int rates[] = {  34,  38,  42,  46,  50,  55,  59,  63,
1472                                 68,  76,  84,  92, 100, 110, 118, 126,
1473                                136, 152, 168, 184, 200, 220, 236, 252,
1474                                272, 304, 336, 368, 400, 440, 472, 504 };
1475
1476         if (code & ~0x7f)
1477                 return EINVAL;
1478         kbd->kb_delay1 = delays[(code >> 5) & 3];
1479         kbd->kb_delay2 = rates[code & 0x1f];
1480         return 0;
1481 }
1482
1483 #ifdef UKBD_EMULATE_ATSCANCODE
1484 Static int
1485 keycode2scancode(int keycode, int shift, int up)
1486 {
1487         static int scan[] = {
1488                 0x1c, 0x1d, 0x35,
1489                 0x37 | SCAN_PREFIX_SHIFT, /* PrintScreen */
1490                 0x38, 0x47, 0x48, 0x49, 0x4b, 0x4d, 0x4f,
1491                 0x50, 0x51, 0x52, 0x53,
1492                 0x46,   /* XXX Pause/Break */
1493                 0x5b, 0x5c, 0x5d,
1494         };
1495         int scancode;
1496
1497         scancode = keycode;
1498         if ((keycode >= 89) && (keycode < 89 + sizeof(scan)/sizeof(scan[0])))
1499                 scancode = scan[keycode - 89] | SCAN_PREFIX_E0;
1500         /* Pause/Break */
1501         if ((keycode == 104) && !(shift & (MOD_CONTROL_L | MOD_CONTROL_R)))
1502                 scancode = 0x45 | SCAN_PREFIX_E1 | SCAN_PREFIX_CTL;
1503         if (shift & (MOD_SHIFT_L | MOD_SHIFT_R))
1504                 scancode &= ~SCAN_PREFIX_SHIFT;
1505         return (scancode | (up ? SCAN_RELEASE : SCAN_PRESS));
1506 }
1507 #endif /* UKBD_EMULATE_ATSCANCODE */
1508
1509 Static int
1510 ukbd_driver_load(module_t mod, int what, void *arg)
1511 {
1512         switch (what) {
1513                 case MOD_LOAD:
1514                         kbd_add_driver(&ukbd_kbd_driver);
1515                         break;
1516                 case MOD_UNLOAD:
1517                         kbd_delete_driver(&ukbd_kbd_driver);
1518                         break;
1519         }
1520         return usbd_driver_load(mod, what, 0);
1521 }