/*- * Copyright (c) 2003-2007 Tim Kientzle * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: src/lib/libarchive/archive.h.in,v 1.46 2007/07/06 15:36:37 kientzle Exp $ */ #ifndef ARCHIVE_H_INCLUDED #define ARCHIVE_H_INCLUDED /* * This header file corresponds to: * Library version @ARCHIVE_VERSION@ * Shared library version @SHLIB_MAJOR@ */ #include /* Linux requires this for off_t */ @ARCHIVE_H_INCLUDE_INTTYPES_H@ #include /* For FILE * */ #ifndef _WIN32 #include /* For ssize_t and size_t */ #else typedef long ssize_t; typedef unsigned int uid_t; typedef unsigned int gid_t; typedef unsigned short mode_t; #endif #ifdef __cplusplus extern "C" { #endif /* * Each of the version identifiers comes as a macro and a function. * The macro identifies the installed header; the function identifies * the library version (which may not be the same if you're using a * dynamically-linked version of the library). */ /* * Textual name/version of the library, useful for version displays. */ #define ARCHIVE_LIBRARY_VERSION "libarchive @ARCHIVE_VERSION@" const char * archive_version(void); /* * Major version number: If ARCHIVE_API_VERSION != * archive_api_version(), then the library you were linked with is * using an incompatible API to the one you were compiled with. This * is almost certainly a fatal problem. */ #define ARCHIVE_API_VERSION @ARCHIVE_API_MAJOR@ int archive_api_version(void); /* * Minor version number: ARCHIVE_API_FEATURE is incremented with each * significant feature addition, so you can test (at compile or run * time) if a particular feature is implemented. It's no big deal if * ARCHIVE_API_FEATURE != archive_api_feature(), as long as both are * high enough to include the features you're relying on. Specific * values of FEATURE are documented here: * * 1 - Version tests are available. * 2 - archive_{read,write}_close available separately from _finish. * 3 - open_memory, open_memory2, open_FILE, open_fd available * 5 - archive_write_disk interface available * * Unfortunately, this count resets whenever ARCHIVE_API_VERSION changes, * making it awkward to use in practice. For that reason, it is deprecated * in favor of the more-accurate version stamp below. It will eventually * be removed. */ #define ARCHIVE_API_FEATURE @ARCHIVE_API_MINOR@ int archive_api_feature(void); /* * The "version stamp" is a single integer that makes it easy to check * the exact version: for version a.b.c, the version stamp is * printf("%d%03d%03d",a,b,c). For example, version 2.12.108 has * version stamp 2012108. * * This was introduced with libarchive 1.9.0 in the libarchive 1.x family * and libarchive 2.2.4 in the libarchive 2.x family. The following * may be useful if you really want to do feature detection for earlier * libarchive versions: * * #ifndef ARCHIVE_VERSION_STAMP * #define ARCHIVE_VERSION_STAMP \ * (ARCHIVE_API_VERSION * 1000000 + ARCHIVE_API_FEATURE * 1000) * #endif */ #define ARCHIVE_VERSION_STAMP @ARCHIVE_VERSION_STAMP@ int archive_version_stamp(void); #define ARCHIVE_BYTES_PER_RECORD 512 #define ARCHIVE_DEFAULT_BYTES_PER_BLOCK 10240 /* Declare our basic types. */ struct archive; struct archive_entry; /* * Error codes: Use archive_errno() and archive_error_string() * to retrieve details. Unless specified otherwise, all functions * that return 'int' use these codes. */ #define ARCHIVE_EOF 1 /* Found end of archive. */ #define ARCHIVE_OK 0 /* Operation was successful. */ #define ARCHIVE_RETRY (-10) /* Retry might succeed. */ #define ARCHIVE_WARN (-20) /* Partial success. */ /* For example, if write_header "fails", then you can't push data. */ #define ARCHIVE_FAILED (-25) /* Current operation cannot complete. */ #define ARCHIVE_FATAL (-30) /* No more operations are possible. */ /* * As far as possible, archive_errno returns standard platform errno codes. * Of course, the details vary by platform, so the actual definitions * here are stored in "archive_platform.h". The symbols are listed here * for reference; as a rule, clients should not need to know the exact * platform-dependent error code. */ /* Unrecognized or invalid file format. */ /* #define ARCHIVE_ERRNO_FILE_FORMAT */ /* Illegal usage of the library. */ /* #define ARCHIVE_ERRNO_PROGRAMMER_ERROR */ /* Unknown or unclassified error. */ /* #define ARCHIVE_ERRNO_MISC */ /* * Callbacks are invoked to automatically read/skip/write/open/close the * archive. You can provide your own for complex tasks (like breaking * archives across multiple tapes) or use standard ones built into the * library. */ /* Returns pointer and size of next block of data from archive. */ typedef ssize_t archive_read_callback(struct archive *, void *_client_data, const void **_buffer); /* Skips at most request bytes from archive and returns the skipped amount */ #if ARCHIVE_API_VERSION < 2 typedef ssize_t archive_skip_callback(struct archive *, void *_client_data, size_t request); #else typedef off_t archive_skip_callback(struct archive *, void *_client_data, off_t request); #endif /* Returns size actually written, zero on EOF, -1 on error. */ typedef ssize_t archive_write_callback(struct archive *, void *_client_data, const void *_buffer, size_t _length); typedef int archive_open_callback(struct archive *, void *_client_data); typedef int archive_close_callback(struct archive *, void *_client_data); /* * Codes for archive_compression. */ #define ARCHIVE_COMPRESSION_NONE 0 #define ARCHIVE_COMPRESSION_GZIP 1 #define ARCHIVE_COMPRESSION_BZIP2 2 #define ARCHIVE_COMPRESSION_COMPRESS 3 #define ARCHIVE_COMPRESSION_PROGRAM 4 /* * Codes returned by archive_format. * * Top 16 bits identifies the format family (e.g., "tar"); lower * 16 bits indicate the variant. This is updated by read_next_header. * Note that the lower 16 bits will often vary from entry to entry. * In some cases, this variation occurs as libarchive learns more about * the archive (for example, later entries might utilize extensions that * weren't necessary earlier in the archive; in this case, libarchive * will change the format code to indicate the extended format that * was used). In other cases, it's because different tools have * modified the archive and so different parts of the archive * actually have slightly different formts. (Both tar and cpio store * format codes in each entry, so it is quite possible for each * entry to be in a different format.) */ #define ARCHIVE_FORMAT_BASE_MASK 0xff0000 #define ARCHIVE_FORMAT_CPIO 0x10000 #define ARCHIVE_FORMAT_CPIO_POSIX (ARCHIVE_FORMAT_CPIO | 1) #define ARCHIVE_FORMAT_CPIO_BIN_LE (ARCHIVE_FORMAT_CPIO | 2) #define ARCHIVE_FORMAT_CPIO_BIN_BE (ARCHIVE_FORMAT_CPIO | 3) #define ARCHIVE_FORMAT_CPIO_SVR4_NOCRC (ARCHIVE_FORMAT_CPIO | 4) #define ARCHIVE_FORMAT_CPIO_SVR4_CRC (ARCHIVE_FORMAT_CPIO | 5) #define ARCHIVE_FORMAT_SHAR 0x20000 #define ARCHIVE_FORMAT_SHAR_BASE (ARCHIVE_FORMAT_SHAR | 1) #define ARCHIVE_FORMAT_SHAR_DUMP (ARCHIVE_FORMAT_SHAR | 2) #define ARCHIVE_FORMAT_TAR 0x30000 #define ARCHIVE_FORMAT_TAR_USTAR (ARCHIVE_FORMAT_TAR | 1) #define ARCHIVE_FORMAT_TAR_PAX_INTERCHANGE (ARCHIVE_FORMAT_TAR | 2) #define ARCHIVE_FORMAT_TAR_PAX_RESTRICTED (ARCHIVE_FORMAT_TAR | 3) #define ARCHIVE_FORMAT_TAR_GNUTAR (ARCHIVE_FORMAT_TAR | 4) #define ARCHIVE_FORMAT_ISO9660 0x40000 #define ARCHIVE_FORMAT_ISO9660_ROCKRIDGE (ARCHIVE_FORMAT_ISO9660 | 1) #define ARCHIVE_FORMAT_ZIP 0x50000 #define ARCHIVE_FORMAT_EMPTY 0x60000 #define ARCHIVE_FORMAT_AR 0x70000 #define ARCHIVE_FORMAT_AR_GNU (ARCHIVE_FORMAT_AR | 1) #define ARCHIVE_FORMAT_AR_BSD (ARCHIVE_FORMAT_AR | 2) /*- * Basic outline for reading an archive: * 1) Ask archive_read_new for an archive reader object. * 2) Update any global properties as appropriate. * In particular, you'll certainly want to call appropriate * archive_read_support_XXX functions. * 3) Call archive_read_open_XXX to open the archive * 4) Repeatedly call archive_read_next_header to get information about * successive archive entries. Call archive_read_data to extract * data for entries of interest. * 5) Call archive_read_finish to end processing. */ struct archive *archive_read_new(void); /* * The archive_read_support_XXX calls enable auto-detect for this * archive handle. They also link in the necessary support code. * For example, if you don't want bzlib linked in, don't invoke * support_compression_bzip2(). The "all" functions provide the * obvious shorthand. */ int archive_read_support_compression_all(struct archive *); int archive_read_support_compression_bzip2(struct archive *); int archive_read_support_compression_compress(struct archive *); int archive_read_support_compression_gzip(struct archive *); int archive_read_support_compression_none(struct archive *); int archive_read_support_compression_program(struct archive *, const char *command); int archive_read_support_format_all(struct archive *); int archive_read_support_format_ar(struct archive *); int archive_read_support_format_cpio(struct archive *); int archive_read_support_format_empty(struct archive *); int archive_read_support_format_gnutar(struct archive *); int archive_read_support_format_iso9660(struct archive *); int archive_read_support_format_tar(struct archive *); int archive_read_support_format_zip(struct archive *); /* Open the archive using callbacks for archive I/O. */ int archive_read_open(struct archive *, void *_client_data, archive_open_callback *, archive_read_callback *, archive_close_callback *); int archive_read_open2(struct archive *, void *_client_data, archive_open_callback *, archive_read_callback *, archive_skip_callback *, archive_close_callback *); /* * A variety of shortcuts that invoke archive_read_open() with * canned callbacks suitable for common situations. The ones that * accept a block size handle tape blocking correctly. */ /* Use this if you know the filename. Note: NULL indicates stdin. */ int archive_read_open_filename(struct archive *, const char *_filename, size_t _block_size); /* archive_read_open_file() is a deprecated synonym for ..._open_filename(). */ int archive_read_open_file(struct archive *, const char *_filename, size_t _block_size); /* Read an archive that's stored in memory. */ int archive_read_open_memory(struct archive *, void * buff, size_t size); /* A more involved version that is only used for internal testing. */ int archive_read_open_memory2(struct archive *a, void *buff, size_t size, size_t read_size); /* Read an archive that's already open, using the file descriptor. */ int archive_read_open_fd(struct archive *, int _fd, size_t _block_size); /* Read an archive that's already open, using a FILE *. */ /* Note: DO NOT use this with tape drives. */ int archive_read_open_FILE(struct archive *, FILE *_file); /* Parses and returns next entry header. */ int archive_read_next_header(struct archive *, struct archive_entry **); /* * Retrieve the byte offset in UNCOMPRESSED data where last-read * header started. */ int64_t archive_read_header_position(struct archive *); /* Read data from the body of an entry. Similar to read(2). */ ssize_t archive_read_data(struct archive *, void *, size_t); /* * A zero-copy version of archive_read_data that also exposes the file offset * of each returned block. Note that the client has no way to specify * the desired size of the block. The API does guarantee that offsets will * be strictly increasing and that returned blocks will not overlap. */ int archive_read_data_block(struct archive *a, const void **buff, size_t *size, off_t *offset); /*- * Some convenience functions that are built on archive_read_data: * 'skip': skips entire entry * 'into_buffer': writes data into memory buffer that you provide * 'into_fd': writes data to specified filedes */ int archive_read_data_skip(struct archive *); int archive_read_data_into_buffer(struct archive *, void *buffer, ssize_t len); int archive_read_data_into_fd(struct archive *, int fd); /*- * Convenience function to recreate the current entry (whose header * has just been read) on disk. * * This does quite a bit more than just copy data to disk. It also: * - Creates intermediate directories as required. * - Manages directory permissions: non-writable directories will * be initially created with write permission enabled; when the * archive is closed, dir permissions are edited to the values specified * in the archive. * - Checks hardlinks: hardlinks will not be extracted unless the * linked-to file was also extracted within the same session. (TODO) */ /* The "flags" argument selects optional behavior, 'OR' the flags you want. */ /* Default: Do not try to set owner/group. */ #define ARCHIVE_EXTRACT_OWNER (1) /* Default: Do obey umask, do not restore SUID/SGID/SVTX bits. */ #define ARCHIVE_EXTRACT_PERM (2) /* Default: Do not restore mtime/atime. */ #define ARCHIVE_EXTRACT_TIME (4) /* Default: Replace existing files. */ #define ARCHIVE_EXTRACT_NO_OVERWRITE (8) /* Default: Try create first, unlink only if create fails with EEXIST. */ #define ARCHIVE_EXTRACT_UNLINK (16) /* Default: Do not restore ACLs. */ #define ARCHIVE_EXTRACT_ACL (32) /* Default: Do not restore fflags. */ #define ARCHIVE_EXTRACT_FFLAGS (64) /* Default: Do not restore xattrs. */ #define ARCHIVE_EXTRACT_XATTR (128) /* Default: Do not try to guard against extracts redirected by symlinks. */ /* Note: With ARCHIVE_EXTRACT_UNLINK, will remove any intermediate symlink. */ #define ARCHIVE_EXTRACT_SECURE_SYMLINKS (256) /* Default: Do not reject entries with '..' as path elements. */ #define ARCHIVE_EXTRACT_SECURE_NODOTDOT (512) /* Default: Create parent directories as needed. */ #define ARCHIVE_EXTRACT_NO_AUTODIR (1024) /* Default: Overwrite files, even if one on disk is newer. */ #define ARCHIVE_EXTRACT_NO_OVERWRITE_NEWER (2048) int archive_read_extract(struct archive *, struct archive_entry *, int flags); void archive_read_extract_set_progress_callback(struct archive *, void (*_progress_func)(void *), void *_user_data); /* Record the dev/ino of a file that will not be written. This is * generally set to the dev/ino of the archive being read. */ void archive_read_extract_set_skip_file(struct archive *, dev_t, ino_t); /* Close the file and release most resources. */ int archive_read_close(struct archive *); /* Release all resources and destroy the object. */ /* Note that archive_read_finish will call archive_read_close for you. */ #if ARCHIVE_API_VERSION > 1 int archive_read_finish(struct archive *); #else /* Temporarily allow library to compile with either 1.x or 2.0 API. */ /* Erroneously declared to return void in libarchive 1.x */ void archive_read_finish(struct archive *); #endif /*- * To create an archive: * 1) Ask archive_write_new for a archive writer object. * 2) Set any global properties. In particular, you should set * the compression and format to use. * 3) Call archive_write_open to open the file (most people * will use archive_write_open_file or archive_write_open_fd, * which provide convenient canned I/O callbacks for you). * 4) For each entry: * - construct an appropriate struct archive_entry structure * - archive_write_header to write the header * - archive_write_data to write the entry data * 5) archive_write_close to close the output * 6) archive_write_finish to cleanup the writer and release resources */ struct archive *archive_write_new(void); int archive_write_set_bytes_per_block(struct archive *, int bytes_per_block); int archive_write_get_bytes_per_block(struct archive *); /* XXX This is badly misnamed; suggestions appreciated. XXX */ int archive_write_set_bytes_in_last_block(struct archive *, int bytes_in_last_block); int archive_write_get_bytes_in_last_block(struct archive *); /* The dev/ino of a file that won't be archived. This is used * to avoid recursively adding an archive to itself. */ int archive_write_set_skip_file(struct archive *, dev_t, ino_t); int archive_write_set_compression_bzip2(struct archive *); int archive_write_set_compression_gzip(struct archive *); int archive_write_set_compression_none(struct archive *); int archive_write_set_compression_program(struct archive *, const char *cmd); /* A convenience function to set the format based on the code or name. */ int archive_write_set_format(struct archive *, int format_code); int archive_write_set_format_by_name(struct archive *, const char *name); /* To minimize link pollution, use one or more of the following. */ int archive_write_set_format_ar_bsd(struct archive *); int archive_write_set_format_ar_svr4(struct archive *); int archive_write_set_format_cpio(struct archive *); int archive_write_set_format_cpio_newc(struct archive *); /* TODO: int archive_write_set_format_old_tar(struct archive *); */ int archive_write_set_format_pax(struct archive *); int archive_write_set_format_pax_restricted(struct archive *); int archive_write_set_format_shar(struct archive *); int archive_write_set_format_shar_dump(struct archive *); int archive_write_set_format_ustar(struct archive *); int archive_write_open(struct archive *, void *, archive_open_callback *, archive_write_callback *, archive_close_callback *); int archive_write_open_fd(struct archive *, int _fd); int archive_write_open_filename(struct archive *, const char *_file); /* A deprecated synonym for archive_write_open_filename() */ int archive_write_open_file(struct archive *, const char *_file); int archive_write_open_FILE(struct archive *, FILE *); /* _buffSize is the size of the buffer, _used refers to a variable that * will be updated after each write into the buffer. */ int archive_write_open_memory(struct archive *, void *_buffer, size_t _buffSize, size_t *_used); /* * Note that the library will truncate writes beyond the size provided * to archive_write_header or pad if the provided data is short. */ int archive_write_header(struct archive *, struct archive_entry *); #if ARCHIVE_API_VERSION > 1 ssize_t archive_write_data(struct archive *, const void *, size_t); #else /* Temporarily allow library to compile with either 1.x or 2.0 API. */ /* This was erroneously declared to return "int" in libarchive 1.x. */ int archive_write_data(struct archive *, const void *, size_t); #endif ssize_t archive_write_data_block(struct archive *, const void *, size_t, off_t); int archive_write_finish_entry(struct archive *); int archive_write_close(struct archive *); #if ARCHIVE_API_VERSION > 1 int archive_write_finish(struct archive *); #else /* Temporarily allow library to compile with either 1.x or 2.0 API. */ /* Return value was incorrect in libarchive 1.x. */ void archive_write_finish(struct archive *); #endif /*- * To create objects on disk: * 1) Ask archive_write_disk_new for a new archive_write_disk object. * 2) Set any global properties. In particular, you should set * the compression and format to use. * 3) For each entry: * - construct an appropriate struct archive_entry structure * - archive_write_header to create the file/dir/etc on disk * - archive_write_data to write the entry data * 4) archive_write_finish to cleanup the writer and release resources * * In particular, you can use this in conjunction with archive_read() * to pull entries out of an archive and create them on disk. */ struct archive *archive_write_disk_new(void); /* This file will not be overwritten. */ int archive_write_disk_set_skip_file(struct archive *, dev_t, ino_t); /* Set flags to control how the next item gets created. */ int archive_write_disk_set_options(struct archive *, int flags); /* * The lookup functions are given uname/uid (or gname/gid) pairs and * return a uid (gid) suitable for this system. These are used for * restoring ownership and for setting ACLs. The default functions * are naive, they just return the uid/gid. These are small, so reasonable * for applications that don't need to preserve ownership; they * are probably also appropriate for applications that are doing * same-system backup and restore. */ /* * The "standard" lookup functions use common system calls to lookup * the uname/gname, falling back to the uid/gid if the names can't be * found. They cache lookups and are reasonably fast, but can be very * large, so they are not used unless you ask for them. In * particular, these match the specifications of POSIX "pax" and old * POSIX "tar". */ int archive_write_disk_set_standard_lookup(struct archive *); /* * If neither the default (naive) nor the standard (big) functions suit * your needs, you can write your own and register them. Be sure to * include a cleanup function if you have allocated private data. */ int archive_write_disk_set_group_lookup(struct archive *, void *private_data, gid_t (*loookup)(void *, const char *gname, gid_t gid), void (*cleanup)(void *)); int archive_write_disk_set_user_lookup(struct archive *, void *private_data, uid_t (*)(void *, const char *uname, uid_t uid), void (*cleanup)(void *)); /* * Accessor functions to read/set various information in * the struct archive object: */ /* Bytes written after compression or read before decompression. */ int64_t archive_position_compressed(struct archive *); /* Bytes written to compressor or read from decompressor. */ int64_t archive_position_uncompressed(struct archive *); const char *archive_compression_name(struct archive *); int archive_compression(struct archive *); int archive_errno(struct archive *); const char *archive_error_string(struct archive *); const char *archive_format_name(struct archive *); int archive_format(struct archive *); void archive_clear_error(struct archive *); void archive_set_error(struct archive *, int _err, const char *fmt, ...); void archive_copy_error(struct archive *dest, struct archive *src); #ifdef __cplusplus } #endif #endif /* !ARCHIVE_H_INCLUDED */