2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULL filesystem
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options TMPFS #Temporary Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 options COMPAT_43 #Compatible with BSD 4.3
36 options COMPAT_DF12 #Compatible with DragonFly up to 1.2
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55 options DSCHED_FQ # Fair-queuing disk scheduler
58 options ALTQ #alternate queueing
59 options ALTQ_CBQ #class based queueing
60 options ALTQ_RED #random early detection
61 options ALTQ_RIO #triple red for diffserv (needs RED)
62 options ALTQ_HFSC #hierarchical fair service curve
63 options ALTQ_PRIQ #priority queue
64 options ALTQ_FAIRQ #fair queueing
65 #options ALTQ_NOPCC #don't use processor cycle counter
66 #options ALTQ_DEBUG #for debugging
68 # Kernels configured with 'options SMP' should generally boot on both
71 options SMP # Symmetric MultiProcessor Kernel
73 # Debugging for Development
82 device fdc0 at isa? port IO_FD1 irq 6 drq 2
83 device fd0 at fdc0 drive 0
84 device fd1 at fdc0 drive 1
86 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
87 # don't use the above line for fdc0 but the following one:
90 # AHCI driver, this will override NATA for AHCI devices,
91 # both drivers may be included.
99 # NEW-ATA (NATA) and ATAPI devices
102 device natadisk # ATA disk drives
103 device natapicd # ATAPI CDROM drives
104 device natapifd # ATAPI floppy drives
105 device natapist # ATAPI tape drives
106 device natapicam # Emulate ATAPI devices as SCSI
107 device nataraid # support for ATA software RAID
109 device natausb # ATA-over-USB support
110 options ATA_STATIC_ID # Static device numbering
113 device ahc # AHA2940 and onboard AIC7xxx devices
114 device ahd # AHA39320/29320 and onboard AIC79xx devices
115 device amd # AMD 53C974 (Tekram DC-390(T))
116 device isp # Qlogic family
117 #device ispfw # Firmware for QLogic HBAs- normally a module
118 device mpt # LSI-Logic MPT/Fusion
119 device ncr # NCR/Symbios Logic
120 device sym # NCR/Symbios Logic (newer chipsets)
121 options SYM_SETUP_LP_PROBE_MAP=0x40
122 # Allow ncr to attach legacy NCR devices when
123 # both sym and ncr are configured
130 device ncv # NCR 53C500
131 device nsp # Workbit Ninja SCSI-3
132 device stg # TMC 18C30/18C50
135 device scbus # SCSI bus (required)
136 device da # Direct Access (disks)
137 device sa # Sequential Access (tape etc)
139 device pass # Passthrough device (direct SCSI access)
140 device sg # Passthrough device (linux scsi generic)
142 # RAID controllers interfaced to the SCSI subsystem
143 device arcmsr # Areca SATA II RAID
144 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
145 device ciss # Compaq SmartRAID 5* series
146 device dpt # DPT Smartcache - See LINT for options!
147 device hptiop # Highpoint RocketRaid 3xxx series
148 device hptmv # Highpoint RocketRAID 182x
149 device iir # Intel Integrated RAID
150 device mly # Mylex AcceleRAID/eXtremeRAID
151 device twa # 3ware 9000 series PATA/SATA RAID
152 device tws # 3ware 9750 series SATA/SAS RAID
155 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
156 device aacp # SCSI passthrough for aac (requires CAM)
157 device amr # AMI MegaRAID
158 device amrp # SCSI Passthrough interface (optional, CAM req.)
159 device ida # Compaq Smart RAID
160 device ips # IBM ServeRAID
161 device mlx # Mylex DAC960 family
162 device mfi # LSI MegaRAID SAS
163 device mfip # LSI MegaRAID SAS passthrough, requires CAM
164 device pst # Promise Supertrack
165 device twe # 3ware Escalade 7000/8000's
167 # atkbdc0 controls both the keyboard and the PS/2 mouse
168 device atkbdc0 at isa? port IO_KBD
169 device atkbd0 at atkbdc? irq 1 flags 0x1
170 device psm0 at atkbdc? irq 12
174 # kbdmux is the keyboard multiplexer
177 # splash screen/screen saver
180 # syscons is the default console driver, resembling an SCO console
181 device sc0 at isa? flags 0x100
182 options SC_PIXEL_MODE # add support for the raster text mode
184 device agp # support several AGP chipsets
186 # Floating point support - do not disable.
187 device npx0 at nexus? port IO_NPX irq 13
189 # Power management support (see LINT for more options)
190 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
192 # HW monitoring devices
193 #device aps0 at isa? port 0x1600
194 device lm0 at isa? port 0x290
195 device it0 at isa? port 0x290
196 device it1 at isa? port 0xc00
197 device it2 at isa? port 0xd00
198 device it3 at isa? port 0x228
199 device wbsio0 at isa? port 0x2e
200 device wbsio1 at isa? port 0x4e
201 device lm#3 at wbsio?
203 # PCCARD (PCMCIA) support
209 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
210 device sio1 at isa? port IO_COM2 irq 3
211 device sio2 at isa? disable port IO_COM3 irq 5
212 device sio3 at isa? disable port IO_COM4 irq 9
215 device ppc0 at isa? irq 7
216 device ppbus # Parallel port bus (required)
218 device plip # TCP/IP over parallel
219 device ppi # Parallel port interface device
220 #device vpo # Requires scbus and da
223 device de # DEC/Intel DC21x4x (``Tulip'')
224 device txp # 3Com 3cR990 (``Typhoon'')
225 device vx # 3Com 3c590, 3c595 (``Vortex'')
227 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
229 device ig_hal # Intel PRO/1000 hardware abstraction layer
231 # PCI Ethernet NICs that use the common MII bus controller code.
232 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
233 device miibus # MII bus support
234 device ae # Attansic/Atheros L2 Fast Ethernet
235 device age # Attansic/Atheros L1 Gigabit Ethernet
236 device alc # Atheros AR8131/AR8132
237 device ale # Atheros AR8121/AR8113/AR8114
238 device bce # Broadcom NetXtreme II Gigabit Ethernet
239 device bfe # Broadcom BCM440x 10/100 Ethernet
240 device dc # DEC/Intel 21143 and various workalikes
241 device et # Agere ET1310 10/100/1000 Ethernet
242 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
243 device jme # JMicron Gigabit/Fast Ethernet
244 device pcn # AMD Am79C97x PCI 10/100 NICs
245 device rl # RealTek 8129/8139
246 device re # RealTek 8139C+/8169
247 device sf # Adaptec AIC-6915 (``Starfire'')
248 device sis # Silicon Integrated Systems SiS 900/SiS 7016
249 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
250 device ste # Sundance ST201 (D-Link DFE-550TX)
251 device tl # Texas Instruments ThunderLAN
252 device tx # SMC EtherPower II (83c170 ``EPIC'')
253 device vge # VIA 612x GigE
254 device vr # VIA Rhine, Rhine II
255 device wb # Winbond W89C840F
256 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
257 device bge # Broadcom BCM570x (``Tigon III'')
258 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
259 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
260 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
263 # 'device ed' requires 'device miibus'
264 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
267 device fe0 at isa? disable port 0x300
272 options IEEE80211_DEBUG #enable debugging msgs
273 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
274 options IEEE80211_SUPPORT_TDMA #enable TDMA support
275 device wlan # 802.11 support
276 device wlan_ccmp # 802.11 CCMP support
277 device wlan_tkip # 802.11 TKIP support
278 device wlan_wep # 802.11 WEP support
279 #device wlan_amrr # AMRR
281 # All wireless NICs require wlan and wlan_amrr
282 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
283 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
284 # mode (the factory default). If you set the switches on your ISA
285 # card for a manually chosen I/O address and IRQ, you must specify
286 # those parameters here.
288 device ral # Ralink Technology 802.11 wireless NIC
289 #device rtw # RealTek 802.11 wireless NIC
290 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
291 # exists only as a PCMCIA device, so there is no ISA attachment needed
292 # and resources will always be dynamically assigned by the pccard code.
295 # The probe order of these is presently determined by i386/isa/isa_compat.c.
296 device lnc0 at isa? disable port 0x280 irq 10 drq 0
297 device cs0 at isa? disable port 0x300
298 device sn0 at isa? disable port 0x300 irq 10
300 # Pseudo devices - the number indicates how many units to allocate.
301 pseudo-device loop # Network loopback
302 pseudo-device ether # Ethernet support
303 pseudo-device sl 1 # Kernel SLIP
304 pseudo-device ppp 1 # Kernel PPP
305 pseudo-device tun # Packet tunnel.
306 pseudo-device pty # Pseudo-ttys (telnet etc)
307 pseudo-device md # Memory "disks"
308 pseudo-device gif # IPv6 and IPv4 tunneling
309 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
311 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
312 # Be aware of the administrative consequences of enabling this!
313 pseudo-device bpf #Berkeley packet filter
315 pseudo-device crypto # core crypto support, used by wlan
316 pseudo-device cryptodev
319 device uhci # UHCI PCI->USB interface
320 device ohci # OHCI PCI->USB interface
321 device usb # USB Bus (required)
322 device ugen # Generic
323 device uhid # "Human Interface Devices"
324 device ukbd # Keyboard
325 device ulpt # Printer
326 device umass # Disks/Mass storage - Requires scbus and da
328 device uscanner # Scanners
329 device urio # Diamond Rio MP3 Player
330 # USB Ethernet, requires mii
331 device aue # ADMtek USB ethernet
332 device axe # ASIX Electronics USB Ethernet
333 device cue # CATC USB ethernet
334 device kue # Kawasaki LSI USB ethernet
335 device rue # RealTek 8150 based USB ethernet
336 # USB wireless NICs, requires wlan, wlan_amrr
337 #device rum # Ralink Technology RT2501USB/RT2601USB
338 #device ural # Ralink Technology RT2500USB
341 device firewire # FireWire bus code
342 device sbp # SCSI over FireWire (Requires scbus and da)
343 device fwe # Ethernet over FireWire (non-standard!)