2 # GENERIC -- Generic kernel configuration file for DragonFly/i386
4 # Check the LINT configuration file in sys/config, for an
5 # exhaustive list of options.
16 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
18 options MATH_EMULATE #Support for x87 emulation
19 options INET #InterNETworking
20 options INET6 #IPv6 communications protocols
21 options HAMMER #Hammer Filesystem
22 options NULLFS #NULL filesystem
23 options FFS #Berkeley Fast Filesystem
24 options FFS_ROOT #FFS usable as root device [keep this!]
25 options SOFTUPDATES #Enable FFS soft updates support
26 options UFS_DIRHASH #Improve performance on big directories
27 options MFS #Memory Filesystem
28 options TMPFS #Temporary Filesystem
29 options MD_ROOT #MD is a potential root device
30 options NFS #Network Filesystem
31 options NFS_ROOT #NFS usable as root device, NFS required
32 options MSDOSFS #MSDOS Filesystem
33 options CD9660 #ISO 9660 Filesystem
34 options PROCFS #Process filesystem
35 #options COMPAT_43 #Compatible with BSD 4.3
36 options COMPAT_DF12 #Compatible with DragonFly up to 1.2
37 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38 options IFPOLL_ENABLE # Support mixed interrupt-polling
39 # handling of network device drivers
40 options UCONSOLE #Allow users to grab the console
41 options USERCONFIG #boot -c editor
42 options VISUAL_USERCONFIG #visual boot -c editor
43 options KTRACE #ktrace(1) support
44 options SYSVSHM #SYSV-style shared memory
45 options SYSVMSG #SYSV-style message queues
46 options SYSVSEM #SYSV-style semaphores
47 options P1003_1B #Posix P1003_1B real-time extensions
48 options _KPOSIX_PRIORITY_SCHEDULING
49 options ICMP_BANDLIM #Rate limit bad replies
50 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55 options DSCHED_FQ # Fair-queuing disk scheduler
58 options ALTQ #alternate queueing
59 options ALTQ_CBQ #class based queueing
60 options ALTQ_RED #random early detection
61 options ALTQ_RIO #triple red for diffserv (needs RED)
62 options ALTQ_HFSC #hierarchical fair service curve
63 options ALTQ_PRIQ #priority queue
64 options ALTQ_FAIRQ #fair queueing
65 #options ALTQ_NOPCC #don't use processor cycle counter
66 #options ALTQ_DEBUG #for debugging
68 # Debugging for Development
77 device fdc0 at isa? port IO_FD1 irq 6 drq 2
78 device fd0 at fdc0 drive 0
79 device fd1 at fdc0 drive 1
81 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
82 # don't use the above line for fdc0 but the following one:
85 # AHCI driver, this will override NATA for AHCI devices,
86 # both drivers may be included.
94 # NEW-ATA (NATA) and ATAPI devices
97 device natadisk # ATA disk drives
98 device natapicd # ATAPI CDROM drives
99 device natapifd # ATAPI floppy drives
100 device natapist # ATAPI tape drives
101 device natapicam # Emulate ATAPI devices as SCSI
102 device nataraid # support for ATA software RAID
104 device natausb # ATA-over-USB support
105 options ATA_STATIC_ID # Static device numbering
108 device ahc # AHA2940 and onboard AIC7xxx devices
109 device ahd # AHA39320/29320 and onboard AIC79xx devices
110 device amd # AMD 53C974 (Tekram DC-390(T))
111 device isp # Qlogic family
112 #device ispfw # Firmware for QLogic HBAs- normally a module
113 device mpt # LSI-Logic MPT/Fusion
114 device mps # LSI-Logic MPT-Fusion 2
115 device ncr # NCR/Symbios Logic
116 device sym # NCR/Symbios Logic (newer chipsets)
117 options SYM_SETUP_LP_PROBE_MAP=0x40
118 # Allow ncr to attach legacy NCR devices when
119 # both sym and ncr are configured
126 device ncv # NCR 53C500
127 device nsp # Workbit Ninja SCSI-3
128 device stg # TMC 18C30/18C50
131 device scbus # SCSI bus (required)
132 device da # Direct Access (disks)
133 device sa # Sequential Access (tape etc)
135 device pass # Passthrough device (direct SCSI access)
136 device sg # Passthrough device (linux scsi generic)
138 # RAID controllers interfaced to the SCSI subsystem
139 device arcmsr # Areca SATA II RAID
140 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
141 device ciss # Compaq SmartRAID 5* series
142 device dpt # DPT Smartcache - See LINT for options!
143 device "hpt27xx" # Highpoint RocketRAID 27xx series
144 device hptiop # Highpoint RocketRAID 3xxx series
145 device hptmv # Highpoint RocketRAID 182x
146 device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
147 device iir # Intel Integrated RAID
148 device mly # Mylex AcceleRAID/eXtremeRAID
149 device twa # 3ware 9000 series PATA/SATA RAID
150 device tws # 3ware 9750 series SATA/SAS RAID
153 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
154 device aacp # SCSI passthrough for aac (requires CAM)
155 device amr # AMI MegaRAID
156 device amrp # SCSI Passthrough interface (optional, CAM req.)
157 device ida # Compaq Smart RAID
158 device ips # IBM ServeRAID
159 device mlx # Mylex DAC960 family
160 device mfi # LSI MegaRAID SAS
161 device mfip # LSI MegaRAID SAS passthrough, requires CAM
162 device pst # Promise Supertrack
163 device twe # 3ware Escalade 7000/8000's
165 # atkbdc0 controls both the keyboard and the PS/2 mouse
166 device atkbdc0 at isa? port IO_KBD
167 device atkbd0 at atkbdc? irq 1 flags 0x1
168 device psm0 at atkbdc? irq 12
172 # kbdmux is the keyboard multiplexer
175 # splash screen/screen saver
178 # syscons is the default console driver, resembling an SCO console
179 device sc0 at isa? flags 0x100
180 options SC_PIXEL_MODE # add support for the raster text mode
182 device agp # support several AGP chipsets
184 # Floating point support - do not disable.
185 device npx0 at nexus? port IO_NPX irq 13
187 # Power management support (see LINT for more options)
188 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
190 # HW monitoring devices
191 #device aps0 at isa? port 0x1600
192 device lm0 at isa? port 0x290
193 device it0 at isa? port 0x290
194 device it1 at isa? port 0xc00
195 device it2 at isa? port 0xd00
196 device it3 at isa? port 0x228
197 device wbsio0 at isa? port 0x2e
198 device wbsio1 at isa? port 0x4e
199 device lm#3 at wbsio?
201 # PCCARD (PCMCIA) support
207 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
208 device sio1 at isa? port IO_COM2 irq 3
209 device sio2 at isa? disable port IO_COM3 irq 5
210 device sio3 at isa? disable port IO_COM4 irq 9
213 device ppc0 at isa? irq 7
214 device ppbus # Parallel port bus (required)
216 device plip # TCP/IP over parallel
217 device ppi # Parallel port interface device
218 #device vpo # Requires scbus and da
221 device de # DEC/Intel DC21x4x (``Tulip'')
222 device txp # 3Com 3cR990 (``Typhoon'')
223 device vx # 3Com 3c590, 3c595 (``Vortex'')
225 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
227 device igb # Intel Pro/1000 (82575, 82576, 82580, i350)
229 device ig_hal # Intel PRO/1000 hardware abstraction layer
230 device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
232 # PCI Ethernet NICs that use the common MII bus controller code.
233 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
234 device miibus # MII bus support
235 device ae # Attansic/Atheros L2 Fast Ethernet
236 device age # Attansic/Atheros L1 Gigabit Ethernet
237 device alc # Atheros AR8131/AR8132
238 device ale # Atheros AR8121/AR8113/AR8114
239 device bce # Broadcom NetXtreme II Gigabit Ethernet
240 device bfe # Broadcom BCM440x 10/100 Ethernet
241 device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet
242 device dc # DEC/Intel 21143 and various workalikes
243 device et # Agere ET1310 10/100/1000 Ethernet
244 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
245 device jme # JMicron Gigabit/Fast Ethernet
246 device pcn # AMD Am79C97x PCI 10/100 NICs
247 device rl # RealTek 8129/8139
248 device re # RealTek 8139C+/8169
249 device sf # Adaptec AIC-6915 (``Starfire'')
250 device sis # Silicon Integrated Systems SiS 900/SiS 7016
251 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
252 device ste # Sundance ST201 (D-Link DFE-550TX)
253 device tl # Texas Instruments ThunderLAN
254 device tx # SMC EtherPower II (83c170 ``EPIC'')
255 device vge # VIA 612x GigE
256 device vr # VIA Rhine, Rhine II
257 device wb # Winbond W89C840F
258 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
259 device bge # Broadcom BCM570x (``Tigon III'')
260 device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
261 device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
262 device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
265 # 'device ed' requires 'device miibus'
266 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
269 device fe0 at isa? disable port 0x300
274 options IEEE80211_DEBUG #enable debugging msgs
275 options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
276 options IEEE80211_SUPPORT_TDMA #enable TDMA support
277 device wlan # 802.11 support
278 device wlan_ccmp # 802.11 CCMP support
279 device wlan_tkip # 802.11 TKIP support
280 device wlan_wep # 802.11 WEP support
281 #device wlan_amrr # AMRR
283 # All wireless NICs require wlan and wlan_amrr
284 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
285 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
286 # mode (the factory default). If you set the switches on your ISA
287 # card for a manually chosen I/O address and IRQ, you must specify
288 # those parameters here.
290 device ral # Ralink Technology 802.11 wireless NIC
291 #device rtw # RealTek 802.11 wireless NIC
292 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
293 # exists only as a PCMCIA device, so there is no ISA attachment needed
294 # and resources will always be dynamically assigned by the pccard code.
297 device lnc0 at isa? disable port 0x280 irq 10 drq 0
298 device cs0 at isa? disable port 0x300
299 device sn0 at isa? disable port 0x300 irq 10
301 # Pseudo devices - the number indicates how many units to allocate.
302 pseudo-device loop # Network loopback
303 pseudo-device ether # Ethernet support
304 pseudo-device sl 1 # Kernel SLIP
305 pseudo-device ppp 1 # Kernel PPP
306 pseudo-device tun # Packet tunnel.
307 pseudo-device pty # Pseudo-ttys (telnet etc)
308 pseudo-device md # Memory "disks"
309 pseudo-device gif # IPv6 and IPv4 tunneling
310 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
316 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
317 # Be aware of the administrative consequences of enabling this!
318 pseudo-device bpf #Berkeley packet filter
320 pseudo-device crypto # core crypto support, used by wlan
321 pseudo-device cryptodev
324 device uhci # UHCI PCI->USB interface
325 device ohci # OHCI PCI->USB interface
326 device usb # USB Bus (required)
327 #device "usb4bsd" # use this instead of usb for the new stack
328 device ugen # Generic
329 device uhid # "Human Interface Devices"
330 device ukbd # Keyboard
331 device ulpt # Printer
332 device umass # Disks/Mass storage - Requires scbus and da
334 device uscanner # Scanners
335 device urio # Diamond Rio MP3 Player
336 # USB Ethernet, requires mii
337 device aue # ADMtek USB ethernet
338 device axe # ASIX Electronics USB Ethernet
339 device cue # CATC USB ethernet
340 device kue # Kawasaki LSI USB ethernet
341 device rue # RealTek 8150 based USB ethernet
342 # USB wireless NICs, requires wlan, wlan_amrr
343 #device rum # Ralink Technology RT2501USB/RT2601USB
344 #device ural # Ralink Technology RT2500USB
347 device firewire # FireWire bus code
348 device sbp # SCSI over FireWire (Requires scbus and da)
349 device fwe # Ethernet over FireWire (non-standard!)