2 * Copyright (c) 2001-2003, Shunsuke Akiyama <akiyama@FreeBSD.org>.
3 * Copyright (c) 1997, 1998, 1999, 2000 Bill Paul <wpaul@ee.columbia.edu>.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * Copyright (c) 1997, 1998, 1999, 2000
29 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
31 * Redistribution and use in source and binary forms, with or without
32 * modification, are permitted provided that the following conditions
34 * 1. Redistributions of source code must retain the above copyright
35 * notice, this list of conditions and the following disclaimer.
36 * 2. Redistributions in binary form must reproduce the above copyright
37 * notice, this list of conditions and the following disclaimer in the
38 * documentation and/or other materials provided with the distribution.
39 * 3. All advertising materials mentioning features or use of this software
40 * must display the following acknowledgement:
41 * This product includes software developed by Bill Paul.
42 * 4. Neither the name of the author nor the names of any co-contributors
43 * may be used to endorse or promote products derived from this software
44 * without specific prior written permission.
46 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
47 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
49 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
50 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
51 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
52 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
53 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
54 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
55 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
56 * THE POSSIBILITY OF SUCH DAMAGE.
59 #include <sys/cdefs.h>
60 __FBSDID("$FreeBSD$");
63 * RealTek RTL8150 USB to fast ethernet controller driver.
64 * Datasheet is available from
65 * ftp://ftp.realtek.com.tw/lancard/data_sheet/8150/.
68 #include <sys/stdint.h>
69 #include <sys/stddef.h>
70 #include <sys/param.h>
71 #include <sys/queue.h>
72 #include <sys/types.h>
73 #include <sys/systm.h>
74 #include <sys/kernel.h>
76 #include <sys/module.h>
78 #include <sys/mutex.h>
79 #include <sys/condvar.h>
80 #include <sys/sysctl.h>
82 #include <sys/unistd.h>
83 #include <sys/callout.h>
84 #include <sys/malloc.h>
87 #include <dev/usb/usb.h>
88 #include <dev/usb/usbdi.h>
89 #include <dev/usb/usbdi_util.h>
92 #define USB_DEBUG_VAR rue_debug
93 #include <dev/usb/usb_debug.h>
94 #include <dev/usb/usb_process.h>
96 #include <dev/usb/net/usb_ethernet.h>
97 #include <dev/usb/net/if_ruereg.h>
100 static int rue_debug = 0;
102 static SYSCTL_NODE(_hw_usb, OID_AUTO, rue, CTLFLAG_RW, 0, "USB rue");
103 SYSCTL_INT(_hw_usb_rue, OID_AUTO, debug, CTLFLAG_RW,
104 &rue_debug, 0, "Debug level");
108 * Various supported device vendors/products.
111 static const STRUCT_USB_HOST_ID rue_devs[] = {
112 {USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAKTX, 0)},
113 {USB_VPI(USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_USBKR100, 0)},
114 {USB_VPI(USB_VENDOR_OQO, USB_PRODUCT_OQO_ETHER01, 0)},
119 static device_probe_t rue_probe;
120 static device_attach_t rue_attach;
121 static device_detach_t rue_detach;
123 static miibus_readreg_t rue_miibus_readreg;
124 static miibus_writereg_t rue_miibus_writereg;
125 static miibus_statchg_t rue_miibus_statchg;
127 static usb_callback_t rue_intr_callback;
128 static usb_callback_t rue_bulk_read_callback;
129 static usb_callback_t rue_bulk_write_callback;
131 static uether_fn_t rue_attach_post;
132 static uether_fn_t rue_init;
133 static uether_fn_t rue_stop;
134 static uether_fn_t rue_start;
135 static uether_fn_t rue_tick;
136 static uether_fn_t rue_setmulti;
137 static uether_fn_t rue_setpromisc;
139 static int rue_read_mem(struct rue_softc *, uint16_t, void *, int);
140 static int rue_write_mem(struct rue_softc *, uint16_t, void *, int);
141 static uint8_t rue_csr_read_1(struct rue_softc *, uint16_t);
142 static uint16_t rue_csr_read_2(struct rue_softc *, uint16_t);
143 static int rue_csr_write_1(struct rue_softc *, uint16_t, uint8_t);
144 static int rue_csr_write_2(struct rue_softc *, uint16_t, uint16_t);
145 static int rue_csr_write_4(struct rue_softc *, int, uint32_t);
147 static void rue_reset(struct rue_softc *);
148 static int rue_ifmedia_upd(struct ifnet *);
149 static void rue_ifmedia_sts(struct ifnet *, struct ifmediareq *);
151 static const struct usb_config rue_config[RUE_N_TRANSFER] = {
155 .endpoint = UE_ADDR_ANY,
156 .direction = UE_DIR_OUT,
158 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
159 .callback = rue_bulk_write_callback,
160 .timeout = 10000, /* 10 seconds */
165 .endpoint = UE_ADDR_ANY,
166 .direction = UE_DIR_IN,
167 .bufsize = (MCLBYTES + 4),
168 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
169 .callback = rue_bulk_read_callback,
170 .timeout = 0, /* no timeout */
174 .type = UE_INTERRUPT,
175 .endpoint = UE_ADDR_ANY,
176 .direction = UE_DIR_IN,
177 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
178 .bufsize = 0, /* use wMaxPacketSize */
179 .callback = rue_intr_callback,
183 static device_method_t rue_methods[] = {
184 /* Device interface */
185 DEVMETHOD(device_probe, rue_probe),
186 DEVMETHOD(device_attach, rue_attach),
187 DEVMETHOD(device_detach, rue_detach),
190 DEVMETHOD(miibus_readreg, rue_miibus_readreg),
191 DEVMETHOD(miibus_writereg, rue_miibus_writereg),
192 DEVMETHOD(miibus_statchg, rue_miibus_statchg),
197 static driver_t rue_driver = {
199 .methods = rue_methods,
200 .size = sizeof(struct rue_softc),
203 static devclass_t rue_devclass;
205 DRIVER_MODULE(rue, uhub, rue_driver, rue_devclass, NULL, 0);
206 DRIVER_MODULE(miibus, rue, miibus_driver, miibus_devclass, 0, 0);
207 MODULE_DEPEND(rue, uether, 1, 1, 1);
208 MODULE_DEPEND(rue, usb, 1, 1, 1);
209 MODULE_DEPEND(rue, ether, 1, 1, 1);
210 MODULE_DEPEND(rue, miibus, 1, 1, 1);
211 MODULE_VERSION(rue, 1);
213 static const struct usb_ether_methods rue_ue_methods = {
214 .ue_attach_post = rue_attach_post,
215 .ue_start = rue_start,
219 .ue_setmulti = rue_setmulti,
220 .ue_setpromisc = rue_setpromisc,
221 .ue_mii_upd = rue_ifmedia_upd,
222 .ue_mii_sts = rue_ifmedia_sts,
225 #define RUE_SETBIT(sc, reg, x) \
226 rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) | (x))
228 #define RUE_CLRBIT(sc, reg, x) \
229 rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) & ~(x))
232 rue_read_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
234 struct usb_device_request req;
236 req.bmRequestType = UT_READ_VENDOR_DEVICE;
237 req.bRequest = UR_SET_ADDRESS;
238 USETW(req.wValue, addr);
239 USETW(req.wIndex, 0);
240 USETW(req.wLength, len);
242 return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
246 rue_write_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
248 struct usb_device_request req;
250 req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
251 req.bRequest = UR_SET_ADDRESS;
252 USETW(req.wValue, addr);
253 USETW(req.wIndex, 0);
254 USETW(req.wLength, len);
256 return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
260 rue_csr_read_1(struct rue_softc *sc, uint16_t reg)
264 rue_read_mem(sc, reg, &val, 1);
269 rue_csr_read_2(struct rue_softc *sc, uint16_t reg)
273 rue_read_mem(sc, reg, &val, 2);
278 rue_csr_write_1(struct rue_softc *sc, uint16_t reg, uint8_t val)
280 return (rue_write_mem(sc, reg, &val, 1));
284 rue_csr_write_2(struct rue_softc *sc, uint16_t reg, uint16_t val)
289 return (rue_write_mem(sc, reg, &temp, 2));
293 rue_csr_write_4(struct rue_softc *sc, int reg, uint32_t val)
298 return (rue_write_mem(sc, reg, &temp, 4));
302 rue_miibus_readreg(device_t dev, int phy, int reg)
304 struct rue_softc *sc = device_get_softc(dev);
309 if (phy != 0) /* RTL8150 supports PHY == 0, only */
312 locked = mtx_owned(&sc->sc_mtx);
337 if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
338 rval = rue_csr_read_1(sc, reg);
341 device_printf(sc->sc_ue.ue_dev, "bad phy register\n");
346 rval = rue_csr_read_2(sc, ruereg);
354 rue_miibus_writereg(device_t dev, int phy, int reg, int data)
356 struct rue_softc *sc = device_get_softc(dev);
360 if (phy != 0) /* RTL8150 supports PHY == 0, only */
363 locked = mtx_owned(&sc->sc_mtx);
387 if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
388 rue_csr_write_1(sc, reg, data);
391 device_printf(sc->sc_ue.ue_dev, " bad phy register\n");
394 rue_csr_write_2(sc, ruereg, data);
402 rue_miibus_statchg(device_t dev)
405 * When the code below is enabled the card starts doing weird
406 * things after link going from UP to DOWN and back UP.
408 * Looks like some of register writes below messes up PHY
411 * No visible regressions were found after commenting this code
412 * out, so that disable it for good.
415 struct rue_softc *sc = device_get_softc(dev);
416 struct mii_data *mii = GET_MII(sc);
420 locked = mtx_owned(&sc->sc_mtx);
424 RUE_CLRBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
426 bmcr = rue_csr_read_2(sc, RUE_BMCR);
428 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
429 bmcr |= RUE_BMCR_SPD_SET;
431 bmcr &= ~RUE_BMCR_SPD_SET;
433 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
434 bmcr |= RUE_BMCR_DUPLEX;
436 bmcr &= ~RUE_BMCR_DUPLEX;
438 rue_csr_write_2(sc, RUE_BMCR, bmcr);
440 RUE_SETBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
448 rue_setpromisc(struct usb_ether *ue)
450 struct rue_softc *sc = uether_getsc(ue);
451 struct ifnet *ifp = uether_getifp(ue);
453 RUE_LOCK_ASSERT(sc, MA_OWNED);
455 /* If we want promiscuous mode, set the allframes bit. */
456 if (ifp->if_flags & IFF_PROMISC)
457 RUE_SETBIT(sc, RUE_RCR, RUE_RCR_AAP);
459 RUE_CLRBIT(sc, RUE_RCR, RUE_RCR_AAP);
463 * Program the 64-bit multicast hash filter.
466 rue_setmulti(struct usb_ether *ue)
468 struct rue_softc *sc = uether_getsc(ue);
469 struct ifnet *ifp = uether_getifp(ue);
472 uint32_t hashes[2] = { 0, 0 };
473 struct ifmultiaddr *ifma;
476 RUE_LOCK_ASSERT(sc, MA_OWNED);
478 rxcfg = rue_csr_read_2(sc, RUE_RCR);
480 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
481 rxcfg |= (RUE_RCR_AAM | RUE_RCR_AAP);
482 rxcfg &= ~RUE_RCR_AM;
483 rue_csr_write_2(sc, RUE_RCR, rxcfg);
484 rue_csr_write_4(sc, RUE_MAR0, 0xFFFFFFFF);
485 rue_csr_write_4(sc, RUE_MAR4, 0xFFFFFFFF);
489 /* first, zot all the existing hash bits */
490 rue_csr_write_4(sc, RUE_MAR0, 0);
491 rue_csr_write_4(sc, RUE_MAR4, 0);
493 /* now program new ones */
495 TAILQ_FOREACH (ifma, &ifp->if_multiaddrs, ifma_link)
497 if (ifma->ifma_addr->sa_family != AF_LINK)
499 h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
500 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
502 hashes[0] |= (1 << h);
504 hashes[1] |= (1 << (h - 32));
507 if_maddr_runlock(ifp);
512 rxcfg &= ~RUE_RCR_AM;
514 rxcfg &= ~(RUE_RCR_AAM | RUE_RCR_AAP);
516 rue_csr_write_2(sc, RUE_RCR, rxcfg);
517 rue_csr_write_4(sc, RUE_MAR0, hashes[0]);
518 rue_csr_write_4(sc, RUE_MAR4, hashes[1]);
522 rue_reset(struct rue_softc *sc)
526 rue_csr_write_1(sc, RUE_CR, RUE_CR_SOFT_RST);
528 for (i = 0; i != RUE_TIMEOUT; i++) {
529 if (uether_pause(&sc->sc_ue, hz / 1000))
531 if (!(rue_csr_read_1(sc, RUE_CR) & RUE_CR_SOFT_RST))
534 if (i == RUE_TIMEOUT)
535 device_printf(sc->sc_ue.ue_dev, "reset never completed\n");
537 uether_pause(&sc->sc_ue, hz / 100);
541 rue_attach_post(struct usb_ether *ue)
543 struct rue_softc *sc = uether_getsc(ue);
545 /* reset the adapter */
548 /* get station address from the EEPROM */
549 rue_read_mem(sc, RUE_EEPROM_IDR0, ue->ue_eaddr, ETHER_ADDR_LEN);
553 * Probe for a RTL8150 chip.
556 rue_probe(device_t dev)
558 struct usb_attach_arg *uaa = device_get_ivars(dev);
560 if (uaa->usb_mode != USB_MODE_HOST)
562 if (uaa->info.bConfigIndex != RUE_CONFIG_IDX)
564 if (uaa->info.bIfaceIndex != RUE_IFACE_IDX)
567 return (usbd_lookup_id_by_uaa(rue_devs, sizeof(rue_devs), uaa));
571 * Attach the interface. Allocate softc structures, do ifmedia
572 * setup and ethernet/BPF attach.
575 rue_attach(device_t dev)
577 struct usb_attach_arg *uaa = device_get_ivars(dev);
578 struct rue_softc *sc = device_get_softc(dev);
579 struct usb_ether *ue = &sc->sc_ue;
583 device_set_usb_desc(dev);
584 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
586 iface_index = RUE_IFACE_IDX;
587 error = usbd_transfer_setup(uaa->device, &iface_index,
588 sc->sc_xfer, rue_config, RUE_N_TRANSFER,
591 device_printf(dev, "allocating USB transfers failed\n");
597 ue->ue_udev = uaa->device;
598 ue->ue_mtx = &sc->sc_mtx;
599 ue->ue_methods = &rue_ue_methods;
601 error = uether_ifattach(ue);
603 device_printf(dev, "could not attach interface\n");
606 return (0); /* success */
610 return (ENXIO); /* failure */
614 rue_detach(device_t dev)
616 struct rue_softc *sc = device_get_softc(dev);
617 struct usb_ether *ue = &sc->sc_ue;
619 usbd_transfer_unsetup(sc->sc_xfer, RUE_N_TRANSFER);
621 mtx_destroy(&sc->sc_mtx);
627 rue_intr_callback(struct usb_xfer *xfer, usb_error_t error)
629 struct rue_softc *sc = usbd_xfer_softc(xfer);
630 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
631 struct rue_intrpkt pkt;
632 struct usb_page_cache *pc;
635 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
637 switch (USB_GET_STATE(xfer)) {
638 case USB_ST_TRANSFERRED:
640 if (ifp && (ifp->if_drv_flags & IFF_DRV_RUNNING) &&
641 actlen >= sizeof(pkt)) {
643 pc = usbd_xfer_get_frame(xfer, 0);
644 usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
646 ifp->if_ierrors += pkt.rue_rxlost_cnt;
647 ifp->if_ierrors += pkt.rue_crcerr_cnt;
648 ifp->if_collisions += pkt.rue_col_cnt;
653 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
654 usbd_transfer_submit(xfer);
658 if (error != USB_ERR_CANCELLED) {
659 /* try to clear stall first */
660 usbd_xfer_set_stall(xfer);
668 rue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
670 struct rue_softc *sc = usbd_xfer_softc(xfer);
671 struct usb_ether *ue = &sc->sc_ue;
672 struct ifnet *ifp = uether_getifp(ue);
673 struct usb_page_cache *pc;
677 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
679 switch (USB_GET_STATE(xfer)) {
680 case USB_ST_TRANSFERRED:
686 pc = usbd_xfer_get_frame(xfer, 0);
687 usbd_copy_out(pc, actlen - 4, &status, sizeof(status));
690 /* check recieve packet was valid or not */
691 status = le16toh(status);
692 if ((status & RUE_RXSTAT_VALID) == 0) {
696 uether_rxbuf(ue, pc, 0, actlen);
700 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
701 usbd_transfer_submit(xfer);
706 DPRINTF("bulk read error, %s\n",
709 if (error != USB_ERR_CANCELLED) {
710 /* try to clear stall first */
711 usbd_xfer_set_stall(xfer);
719 rue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
721 struct rue_softc *sc = usbd_xfer_softc(xfer);
722 struct ifnet *ifp = uether_getifp(&sc->sc_ue);
723 struct usb_page_cache *pc;
727 switch (USB_GET_STATE(xfer)) {
728 case USB_ST_TRANSFERRED:
729 DPRINTFN(11, "transfer complete\n");
735 if ((sc->sc_flags & RUE_FLAG_LINK) == 0) {
737 * don't send anything if there is no link !
741 IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
745 if (m->m_pkthdr.len > MCLBYTES)
746 m->m_pkthdr.len = MCLBYTES;
747 temp_len = m->m_pkthdr.len;
749 pc = usbd_xfer_get_frame(xfer, 0);
750 usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
753 * This is an undocumented behavior.
754 * RTL8150 chip doesn't send frame length smaller than
755 * RUE_MIN_FRAMELEN (60) byte packet.
757 if (temp_len < RUE_MIN_FRAMELEN) {
758 usbd_frame_zero(pc, temp_len,
759 RUE_MIN_FRAMELEN - temp_len);
760 temp_len = RUE_MIN_FRAMELEN;
762 usbd_xfer_set_frame_len(xfer, 0, temp_len);
765 * if there's a BPF listener, bounce a copy
766 * of this frame to him:
772 usbd_transfer_submit(xfer);
777 DPRINTFN(11, "transfer error, %s\n",
782 if (error != USB_ERR_CANCELLED) {
783 /* try to clear stall first */
784 usbd_xfer_set_stall(xfer);
792 rue_tick(struct usb_ether *ue)
794 struct rue_softc *sc = uether_getsc(ue);
795 struct mii_data *mii = GET_MII(sc);
797 RUE_LOCK_ASSERT(sc, MA_OWNED);
800 if ((sc->sc_flags & RUE_FLAG_LINK) == 0
801 && mii->mii_media_status & IFM_ACTIVE &&
802 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
803 sc->sc_flags |= RUE_FLAG_LINK;
809 rue_start(struct usb_ether *ue)
811 struct rue_softc *sc = uether_getsc(ue);
814 * start the USB transfers, if not already started:
816 usbd_transfer_start(sc->sc_xfer[RUE_INTR_DT_RD]);
817 usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_RD]);
818 usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_WR]);
822 rue_init(struct usb_ether *ue)
824 struct rue_softc *sc = uether_getsc(ue);
825 struct ifnet *ifp = uether_getifp(ue);
827 RUE_LOCK_ASSERT(sc, MA_OWNED);
834 /* Set MAC address */
835 rue_write_mem(sc, RUE_IDR0, IF_LLADDR(ifp), ETHER_ADDR_LEN);
840 * Set the initial TX and RX configuration.
842 rue_csr_write_1(sc, RUE_TCR, RUE_TCR_CONFIG);
843 rue_csr_write_2(sc, RUE_RCR, RUE_RCR_CONFIG|RUE_RCR_AB);
845 /* Load the multicast filter */
847 /* Load the multicast filter. */
850 /* Enable RX and TX */
851 rue_csr_write_1(sc, RUE_CR, (RUE_CR_TE | RUE_CR_RE | RUE_CR_EP3CLREN));
853 usbd_xfer_set_stall(sc->sc_xfer[RUE_BULK_DT_WR]);
855 ifp->if_drv_flags |= IFF_DRV_RUNNING;
863 rue_ifmedia_upd(struct ifnet *ifp)
865 struct rue_softc *sc = ifp->if_softc;
866 struct mii_data *mii = GET_MII(sc);
867 struct mii_softc *miisc;
869 RUE_LOCK_ASSERT(sc, MA_OWNED);
871 sc->sc_flags &= ~RUE_FLAG_LINK;
872 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
879 * Report current media status.
882 rue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
884 struct rue_softc *sc = ifp->if_softc;
885 struct mii_data *mii = GET_MII(sc);
889 ifmr->ifm_active = mii->mii_media_active;
890 ifmr->ifm_status = mii->mii_media_status;
895 rue_stop(struct usb_ether *ue)
897 struct rue_softc *sc = uether_getsc(ue);
898 struct ifnet *ifp = uether_getifp(ue);
900 RUE_LOCK_ASSERT(sc, MA_OWNED);
902 ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
903 sc->sc_flags &= ~RUE_FLAG_LINK;
906 * stop all the transfers, if not already stopped:
908 usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_WR]);
909 usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_RD]);
910 usbd_transfer_stop(sc->sc_xfer[RUE_INTR_DT_RD]);
912 rue_csr_write_1(sc, RUE_CR, 0x00);