2 * Copyright (c) 2000 Andre Lucas. All rights reserved.
3 * Portions copyright (c) 1998 Todd C. Miller
4 * Portions copyright (c) 1996 Jason Downs
5 * Portions copyright (c) 1996 Theo de Raadt
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 * The btmp logging code is derived from login.c from util-linux and is under
30 * the the following license:
32 * Copyright (c) 1980, 1987, 1988 The Regents of the University of California.
33 * All rights reserved.
35 * Redistribution and use in source and binary forms are permitted
36 * provided that the above copyright notice and this paragraph are
37 * duplicated in all such forms and that any documentation,
38 * advertising materials, and other materials related to such
39 * distribution and use acknowledge that the software was developed
40 * by the University of California, Berkeley. The name of the
41 * University may not be used to endorse or promote products derived
42 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
44 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
45 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
50 ** loginrec.c: platform-independent login recording and lastlog retrieval
54 * The new login code explained
55 * ============================
57 * This code attempts to provide a common interface to login recording
58 * (utmp and friends) and last login time retrieval.
60 * Its primary means of achieving this is to use 'struct logininfo', a
61 * union of all the useful fields in the various different types of
62 * system login record structures one finds on UNIX variants.
64 * We depend on autoconf to define which recording methods are to be
65 * used, and which fields are contained in the relevant data structures
66 * on the local system. Many C preprocessor symbols affect which code
69 * The code is designed to make it easy to modify a particular
70 * recording method, without affecting other methods nor requiring so
71 * many nested conditional compilation blocks as were commonplace in
74 * For login recording, we try to use the local system's libraries as
75 * these are clearly most likely to work correctly. For utmp systems
76 * this usually means login() and logout() or setutent() etc., probably
77 * in libutil, along with logwtmp() etc. On these systems, we fall back
78 * to writing the files directly if we have to, though this method
79 * requires very thorough testing so we do not corrupt local auditing
80 * information. These files and their access methods are very system
83 * For utmpx systems, the corresponding library functions are
84 * setutxent() etc. To the author's knowledge, all utmpx systems have
85 * these library functions and so no direct write is attempted. If such
86 * a system exists and needs support, direct analogues of the [uw]tmp
87 * code should suffice.
89 * Retrieving the time of last login ('lastlog') is in some ways even
90 * more problemmatic than login recording. Some systems provide a
91 * simple table of all users which we seek based on uid and retrieve a
92 * relatively standard structure. Others record the same information in
93 * a directory with a separate file, and others don't record the
94 * information separately at all. For systems in the latter category,
95 * we look backwards in the wtmp or wtmpx file for the last login entry
96 * for our user. Naturally this is slower and on busy systems could
97 * incur a significant performance penalty.
99 * Calling the new code
100 * --------------------
102 * In OpenSSH all login recording and retrieval is performed in
103 * login.c. Here you'll find working examples. Also, in the logintest.c
104 * program there are more examples.
106 * Internal handler calling method
107 * -------------------------------
109 * When a call is made to login_login() or login_logout(), both
110 * routines set a struct logininfo flag defining which action (log in,
111 * or log out) is to be taken. They both then call login_write(), which
112 * calls whichever of the many structure-specific handlers autoconf
113 * selects for the local system.
115 * The handlers themselves handle system data structure specifics. Both
116 * struct utmp and struct utmpx have utility functions (see
117 * construct_utmp*()) to try to make it simpler to add extra systems
118 * that introduce new features to either structure.
120 * While it may seem terribly wasteful to replicate so much similar
121 * code for each method, experience has shown that maintaining code to
122 * write both struct utmp and utmpx in one function, whilst maintaining
123 * support for all systems whether they have library support or not, is
124 * a difficult and time-consuming task.
126 * Lastlog support proceeds similarly. Functions login_get_lastlog()
127 * (and its OpenSSH-tuned friend login_get_lastlog_time()) call
128 * getlast_entry(), which tries one of three methods to find the last
129 * login time. It uses local system lastlog support if it can,
130 * otherwise it tries wtmp or wtmpx before giving up and returning 0,
136 * In many cases it's possible to tweak autoconf to select the correct
137 * methods for a particular platform, either by improving the detection
138 * code (best), or by presetting DISABLE_<method> or CONF_<method>_FILE
139 * symbols for the platform.
141 * Use logintest to check which symbols are defined before modifying
142 * configure.ac and loginrec.c. (You have to build logintest yourself
143 * with 'make logintest' as it's not built by default.)
145 * Otherwise, patches to the specific method(s) are very helpful!
148 #include "includes.h"
150 #include <sys/types.h>
151 #include <sys/stat.h>
152 #include <sys/socket.h>
154 #include <netinet/in.h>
169 #include "hostfile.h"
171 #include "loginrec.h"
173 #include "atomicio.h"
175 #include "canohost.h"
183 #ifdef HAVE_LIBUTIL_H
184 # include <libutil.h>
188 ** prototypes for helper functions in this file
192 void set_utmp_time(struct logininfo *li, struct utmp *ut);
193 void construct_utmp(struct logininfo *li, struct utmp *ut);
197 void set_utmpx_time(struct logininfo *li, struct utmpx *ut);
198 void construct_utmpx(struct logininfo *li, struct utmpx *ut);
201 int utmp_write_entry(struct logininfo *li);
202 int utmpx_write_entry(struct logininfo *li);
203 int wtmp_write_entry(struct logininfo *li);
204 int wtmpx_write_entry(struct logininfo *li);
205 int lastlog_write_entry(struct logininfo *li);
206 int syslogin_write_entry(struct logininfo *li);
208 int getlast_entry(struct logininfo *li);
209 int lastlog_get_entry(struct logininfo *li);
210 int utmpx_get_entry(struct logininfo *li);
211 int wtmp_get_entry(struct logininfo *li);
212 int wtmpx_get_entry(struct logininfo *li);
214 extern Buffer loginmsg;
216 /* pick the shortest string */
217 #define MIN_SIZEOF(s1,s2) (sizeof(s1) < sizeof(s2) ? sizeof(s1) : sizeof(s2))
220 ** platform-independent login functions
224 * login_login(struct logininfo *) - Record a login
226 * Call with a pointer to a struct logininfo initialised with
227 * login_init_entry() or login_alloc_entry()
231 * 0 on failure (will use OpenSSH's logging facilities for diagnostics)
234 login_login(struct logininfo *li)
236 li->type = LTYPE_LOGIN;
237 return (login_write(li));
242 * login_logout(struct logininfo *) - Record a logout
244 * Call as with login_login()
248 * 0 on failure (will use OpenSSH's logging facilities for diagnostics)
251 login_logout(struct logininfo *li)
253 li->type = LTYPE_LOGOUT;
254 return (login_write(li));
258 * login_get_lastlog_time(int) - Retrieve the last login time
260 * Retrieve the last login time for the given uid. Will try to use the
261 * system lastlog facilities if they are available, but will fall back
262 * to looking in wtmp/wtmpx if necessary
265 * 0 on failure, or if user has never logged in
266 * Time in seconds from the epoch if successful
268 * Useful preprocessor symbols:
269 * DISABLE_LASTLOG: If set, *never* even try to retrieve lastlog
271 * USE_LASTLOG: If set, indicates the presence of system lastlog
272 * facilities. If this and DISABLE_LASTLOG are not set,
273 * try to retrieve lastlog information from wtmp/wtmpx.
276 login_get_lastlog_time(const int uid)
280 if (login_get_lastlog(&li, uid))
287 * login_get_lastlog(struct logininfo *, int) - Retrieve a lastlog entry
289 * Retrieve a logininfo structure populated (only partially) with
290 * information from the system lastlog data, or from wtmp/wtmpx if no
291 * system lastlog information exists.
293 * Note this routine must be given a pre-allocated logininfo.
296 * >0: A pointer to your struct logininfo if successful
297 * 0 on failure (will use OpenSSH's logging facilities for diagnostics)
300 login_get_lastlog(struct logininfo *li, const int uid)
304 memset(li, '\0', sizeof(*li));
308 * If we don't have a 'real' lastlog, we need the username to
309 * reliably search wtmp(x) for the last login (see
314 fatal("%s: Cannot find account for uid %i", __func__, uid);
316 /* No MIN_SIZEOF here - we absolutely *must not* truncate the
317 * username (XXX - so check for trunc!) */
318 strlcpy(li->username, pw->pw_name, sizeof(li->username));
320 if (getlast_entry(li))
328 * login_alloc_entry(int, char*, char*, char*) - Allocate and initialise
329 * a logininfo structure
331 * This function creates a new struct logininfo, a data structure
332 * meant to carry the information required to portably record login info.
334 * Returns a pointer to a newly created struct logininfo. If memory
335 * allocation fails, the program halts.
338 logininfo *login_alloc_entry(int pid, const char *username,
339 const char *hostname, const char *line)
341 struct logininfo *newli;
343 newli = xmalloc(sizeof(*newli));
344 login_init_entry(newli, pid, username, hostname, line);
349 /* login_free_entry(struct logininfo *) - free struct memory */
351 login_free_entry(struct logininfo *li)
357 /* login_init_entry(struct logininfo *, int, char*, char*, char*)
358 * - initialise a struct logininfo
360 * Populates a new struct logininfo, a data structure meant to carry
361 * the information required to portably record login info.
366 login_init_entry(struct logininfo *li, int pid, const char *username,
367 const char *hostname, const char *line)
371 memset(li, 0, sizeof(*li));
375 /* set the line information */
377 line_fullname(li->line, line, sizeof(li->line));
380 strlcpy(li->username, username, sizeof(li->username));
381 pw = getpwnam(li->username);
383 fatal("%s: Cannot find user \"%s\"", __func__,
386 li->uid = pw->pw_uid;
390 strlcpy(li->hostname, hostname, sizeof(li->hostname));
396 * login_set_current_time(struct logininfo *) - set the current time
398 * Set the current time in a logininfo structure. This function is
399 * meant to eliminate the need to deal with system dependencies for
403 login_set_current_time(struct logininfo *li)
407 gettimeofday(&tv, NULL);
409 li->tv_sec = tv.tv_sec;
410 li->tv_usec = tv.tv_usec;
413 /* copy a sockaddr_* into our logininfo */
415 login_set_addr(struct logininfo *li, const struct sockaddr *sa,
416 const unsigned int sa_size)
418 unsigned int bufsize = sa_size;
420 /* make sure we don't overrun our union */
421 if (sizeof(li->hostaddr) < sa_size)
422 bufsize = sizeof(li->hostaddr);
424 memcpy(&li->hostaddr.sa, sa, bufsize);
429 ** login_write: Call low-level recording functions based on autoconf
433 login_write(struct logininfo *li)
436 if (geteuid() != 0) {
437 logit("Attempt to write login records by non-root user (aborting)");
442 /* set the timestamp */
443 login_set_current_time(li);
445 syslogin_write_entry(li);
448 if (li->type == LTYPE_LOGIN)
449 lastlog_write_entry(li);
452 utmp_write_entry(li);
455 wtmp_write_entry(li);
458 utmpx_write_entry(li);
461 wtmpx_write_entry(li);
463 #ifdef CUSTOM_SYS_AUTH_RECORD_LOGIN
464 if (li->type == LTYPE_LOGIN &&
465 !sys_auth_record_login(li->username,li->hostname,li->line,
467 logit("Writing login record failed for %s", li->username);
469 #ifdef SSH_AUDIT_EVENTS
470 if (li->type == LTYPE_LOGIN)
471 audit_session_open(li->line);
472 else if (li->type == LTYPE_LOGOUT)
473 audit_session_close(li->line);
478 #ifdef LOGIN_NEEDS_UTMPX
480 login_utmp_only(struct logininfo *li)
482 li->type = LTYPE_LOGIN;
483 login_set_current_time(li);
485 utmp_write_entry(li);
488 wtmp_write_entry(li);
491 utmpx_write_entry(li);
494 wtmpx_write_entry(li);
501 ** getlast_entry: Call low-level functions to retrieve the last login
505 /* take the uid in li and return the last login time */
507 getlast_entry(struct logininfo *li)
510 return(lastlog_get_entry(li));
511 #else /* !USE_LASTLOG */
512 #if defined(USE_UTMPX) && defined(HAVE_SETUTXDB) && \
513 defined(UTXDB_LASTLOGIN) && defined(HAVE_GETUTXUSER)
514 return (utmpx_get_entry(li));
517 #if defined(DISABLE_LASTLOG)
518 /* On some systems we shouldn't even try to obtain last login
521 # elif defined(USE_WTMP) && \
522 (defined(HAVE_TIME_IN_UTMP) || defined(HAVE_TV_IN_UTMP))
523 /* retrieve last login time from utmp */
524 return (wtmp_get_entry(li));
525 # elif defined(USE_WTMPX) && \
526 (defined(HAVE_TIME_IN_UTMPX) || defined(HAVE_TV_IN_UTMPX))
527 /* If wtmp isn't available, try wtmpx */
528 return (wtmpx_get_entry(li));
530 /* Give up: No means of retrieving last login time */
532 # endif /* DISABLE_LASTLOG */
533 #endif /* USE_LASTLOG */
539 * 'line' string utility functions
541 * These functions process the 'line' string into one of three forms:
543 * 1. The full filename (including '/dev')
544 * 2. The stripped name (excluding '/dev')
545 * 3. The abbreviated name (e.g. /dev/ttyp00 -> yp00
546 * /dev/pts/1 -> ts/1 )
548 * Form 3 is used on some systems to identify a .tmp.? entry when
549 * attempting to remove it. Typically both addition and removal is
550 * performed by one application - say, sshd - so as long as the choice
551 * uniquely identifies a terminal it's ok.
556 * line_fullname(): add the leading '/dev/' if it doesn't exist make
557 * sure dst has enough space, if not just copy src (ugh)
560 line_fullname(char *dst, const char *src, u_int dstsize)
562 memset(dst, '\0', dstsize);
563 if ((strncmp(src, "/dev/", 5) == 0) || (dstsize < (strlen(src) + 5)))
564 strlcpy(dst, src, dstsize);
566 strlcpy(dst, "/dev/", dstsize);
567 strlcat(dst, src, dstsize);
572 /* line_stripname(): strip the leading '/dev' if it exists, return dst */
574 line_stripname(char *dst, const char *src, int dstsize)
576 memset(dst, '\0', dstsize);
577 if (strncmp(src, "/dev/", 5) == 0)
578 strlcpy(dst, src + 5, dstsize);
580 strlcpy(dst, src, dstsize);
585 * line_abbrevname(): Return the abbreviated (usually four-character)
586 * form of the line (Just use the last <dstsize> characters of the
589 * NOTE: use strncpy because we do NOT necessarily want zero
593 line_abbrevname(char *dst, const char *src, int dstsize)
597 memset(dst, '\0', dstsize);
599 /* Always skip prefix if present */
600 if (strncmp(src, "/dev/", 5) == 0)
603 #ifdef WITH_ABBREV_NO_TTY
604 if (strncmp(src, "tty", 3) == 0)
611 if (((int)len - dstsize) > 0)
612 src += ((int)len - dstsize);
614 /* note: _don't_ change this to strlcpy */
615 strncpy(dst, src, (size_t)dstsize);
622 ** utmp utility functions
624 ** These functions manipulate struct utmp, taking system differences
628 #if defined(USE_UTMP) || defined (USE_WTMP) || defined (USE_LOGIN)
630 /* build the utmp structure */
632 set_utmp_time(struct logininfo *li, struct utmp *ut)
634 # if defined(HAVE_TV_IN_UTMP)
635 ut->ut_tv.tv_sec = li->tv_sec;
636 ut->ut_tv.tv_usec = li->tv_usec;
637 # elif defined(HAVE_TIME_IN_UTMP)
638 ut->ut_time = li->tv_sec;
643 construct_utmp(struct logininfo *li,
646 # ifdef HAVE_ADDR_V6_IN_UTMP
647 struct sockaddr_in6 *sa6;
650 memset(ut, '\0', sizeof(*ut));
652 /* First fill out fields used for both logins and logouts */
654 # ifdef HAVE_ID_IN_UTMP
655 line_abbrevname(ut->ut_id, li->line, sizeof(ut->ut_id));
658 # ifdef HAVE_TYPE_IN_UTMP
659 /* This is done here to keep utmp constants out of struct logininfo */
662 ut->ut_type = USER_PROCESS;
668 ut->ut_type = DEAD_PROCESS;
670 cray_retain_utmp(ut, li->pid);
675 set_utmp_time(li, ut);
677 line_stripname(ut->ut_line, li->line, sizeof(ut->ut_line));
679 # ifdef HAVE_PID_IN_UTMP
680 ut->ut_pid = li->pid;
683 /* If we're logging out, leave all other fields blank */
684 if (li->type == LTYPE_LOGOUT)
688 * These fields are only used when logging in, and are blank
692 /* Use strncpy because we don't necessarily want null termination */
693 strncpy(ut->ut_name, li->username,
694 MIN_SIZEOF(ut->ut_name, li->username));
695 # ifdef HAVE_HOST_IN_UTMP
696 strncpy(ut->ut_host, li->hostname,
697 MIN_SIZEOF(ut->ut_host, li->hostname));
699 # ifdef HAVE_ADDR_IN_UTMP
700 /* this is just a 32-bit IP address */
701 if (li->hostaddr.sa.sa_family == AF_INET)
702 ut->ut_addr = li->hostaddr.sa_in.sin_addr.s_addr;
704 # ifdef HAVE_ADDR_V6_IN_UTMP
705 /* this is just a 128-bit IPv6 address */
706 if (li->hostaddr.sa.sa_family == AF_INET6) {
707 sa6 = ((struct sockaddr_in6 *)&li->hostaddr.sa);
708 memcpy(ut->ut_addr_v6, sa6->sin6_addr.s6_addr, 16);
709 if (IN6_IS_ADDR_V4MAPPED(&sa6->sin6_addr)) {
710 ut->ut_addr_v6[0] = ut->ut_addr_v6[3];
711 ut->ut_addr_v6[1] = 0;
712 ut->ut_addr_v6[2] = 0;
713 ut->ut_addr_v6[3] = 0;
718 #endif /* USE_UTMP || USE_WTMP || USE_LOGIN */
721 ** utmpx utility functions
723 ** These functions manipulate struct utmpx, accounting for system
727 #if defined(USE_UTMPX) || defined (USE_WTMPX)
728 /* build the utmpx structure */
730 set_utmpx_time(struct logininfo *li, struct utmpx *utx)
732 # if defined(HAVE_TV_IN_UTMPX)
733 utx->ut_tv.tv_sec = li->tv_sec;
734 utx->ut_tv.tv_usec = li->tv_usec;
735 # elif defined(HAVE_TIME_IN_UTMPX)
736 utx->ut_time = li->tv_sec;
741 construct_utmpx(struct logininfo *li, struct utmpx *utx)
743 # ifdef HAVE_ADDR_V6_IN_UTMP
744 struct sockaddr_in6 *sa6;
746 memset(utx, '\0', sizeof(*utx));
748 # ifdef HAVE_ID_IN_UTMPX
749 line_abbrevname(utx->ut_id, li->line, sizeof(utx->ut_id));
752 /* this is done here to keep utmp constants out of loginrec.h */
755 utx->ut_type = USER_PROCESS;
758 utx->ut_type = DEAD_PROCESS;
761 line_stripname(utx->ut_line, li->line, sizeof(utx->ut_line));
762 set_utmpx_time(li, utx);
763 utx->ut_pid = li->pid;
765 /* strncpy(): Don't necessarily want null termination */
766 strncpy(utx->ut_user, li->username,
767 MIN_SIZEOF(utx->ut_user, li->username));
769 if (li->type == LTYPE_LOGOUT)
773 * These fields are only used when logging in, and are blank
777 # ifdef HAVE_HOST_IN_UTMPX
778 strncpy(utx->ut_host, li->hostname,
779 MIN_SIZEOF(utx->ut_host, li->hostname));
781 # ifdef HAVE_ADDR_IN_UTMPX
782 /* this is just a 32-bit IP address */
783 if (li->hostaddr.sa.sa_family == AF_INET)
784 utx->ut_addr = li->hostaddr.sa_in.sin_addr.s_addr;
786 # ifdef HAVE_ADDR_V6_IN_UTMP
787 /* this is just a 128-bit IPv6 address */
788 if (li->hostaddr.sa.sa_family == AF_INET6) {
789 sa6 = ((struct sockaddr_in6 *)&li->hostaddr.sa);
790 memcpy(ut->ut_addr_v6, sa6->sin6_addr.s6_addr, 16);
791 if (IN6_IS_ADDR_V4MAPPED(&sa6->sin6_addr)) {
792 ut->ut_addr_v6[0] = ut->ut_addr_v6[3];
793 ut->ut_addr_v6[1] = 0;
794 ut->ut_addr_v6[2] = 0;
795 ut->ut_addr_v6[3] = 0;
799 # ifdef HAVE_SYSLEN_IN_UTMPX
800 /* ut_syslen is the length of the utx_host string */
801 utx->ut_syslen = MIN(strlen(li->hostname), sizeof(utx->ut_host));
804 #endif /* USE_UTMPX || USE_WTMPX */
807 ** Low-level utmp functions
810 /* FIXME: (ATL) utmp_write_direct needs testing */
813 /* if we can, use pututline() etc. */
814 # if !defined(DISABLE_PUTUTLINE) && defined(HAVE_SETUTENT) && \
815 defined(HAVE_PUTUTLINE)
816 # define UTMP_USE_LIBRARY
820 /* write a utmp entry with the system's help (pututline() and pals) */
821 # ifdef UTMP_USE_LIBRARY
823 utmp_write_library(struct logininfo *li, struct utmp *ut)
827 # ifdef HAVE_ENDUTENT
832 # else /* UTMP_USE_LIBRARY */
835 * Write a utmp entry direct to the file
836 * This is a slightly modification of code in OpenBSD's login.c
839 utmp_write_direct(struct logininfo *li, struct utmp *ut)
845 /* FIXME: (ATL) ttyslot() needs local implementation */
847 #if defined(HAVE_GETTTYENT)
852 while (NULL != (ty = getttyent())) {
854 if (!strncmp(ty->ty_name, ut->ut_line, sizeof(ut->ut_line)))
860 logit("%s: tty not found", __func__);
865 tty = ttyslot(); /* seems only to work for /dev/ttyp? style names */
867 #endif /* HAVE_GETTTYENT */
869 if (tty > 0 && (fd = open(UTMP_FILE, O_RDWR|O_CREAT, 0644)) >= 0) {
872 pos = (off_t)tty * sizeof(struct utmp);
873 if ((ret = lseek(fd, pos, SEEK_SET)) == -1) {
874 logit("%s: lseek: %s", __func__, strerror(errno));
878 logit("%s: Couldn't seek to tty %d slot in %s",
879 __func__, tty, UTMP_FILE);
883 * Prevent luser from zero'ing out ut_host.
884 * If the new ut_line is empty but the old one is not
885 * and ut_line and ut_name match, preserve the old ut_line.
887 if (atomicio(read, fd, &old_ut, sizeof(old_ut)) == sizeof(old_ut) &&
888 (ut->ut_host[0] == '\0') && (old_ut.ut_host[0] != '\0') &&
889 (strncmp(old_ut.ut_line, ut->ut_line, sizeof(ut->ut_line)) == 0) &&
890 (strncmp(old_ut.ut_name, ut->ut_name, sizeof(ut->ut_name)) == 0))
891 memcpy(ut->ut_host, old_ut.ut_host, sizeof(ut->ut_host));
893 if ((ret = lseek(fd, pos, SEEK_SET)) == -1) {
894 logit("%s: lseek: %s", __func__, strerror(errno));
898 logit("%s: Couldn't seek to tty %d slot in %s",
899 __func__, tty, UTMP_FILE);
902 if (atomicio(vwrite, fd, ut, sizeof(*ut)) != sizeof(*ut)) {
903 logit("%s: error writing %s: %s", __func__,
904 UTMP_FILE, strerror(errno));
913 # endif /* UTMP_USE_LIBRARY */
916 utmp_perform_login(struct logininfo *li)
920 construct_utmp(li, &ut);
921 # ifdef UTMP_USE_LIBRARY
922 if (!utmp_write_library(li, &ut)) {
923 logit("%s: utmp_write_library() failed", __func__);
927 if (!utmp_write_direct(li, &ut)) {
928 logit("%s: utmp_write_direct() failed", __func__);
937 utmp_perform_logout(struct logininfo *li)
941 construct_utmp(li, &ut);
942 # ifdef UTMP_USE_LIBRARY
943 if (!utmp_write_library(li, &ut)) {
944 logit("%s: utmp_write_library() failed", __func__);
948 if (!utmp_write_direct(li, &ut)) {
949 logit("%s: utmp_write_direct() failed", __func__);
958 utmp_write_entry(struct logininfo *li)
962 return (utmp_perform_login(li));
965 return (utmp_perform_logout(li));
968 logit("%s: invalid type field", __func__);
972 #endif /* USE_UTMP */
976 ** Low-level utmpx functions
979 /* not much point if we don't want utmpx entries */
982 /* if we have the wherewithall, use pututxline etc. */
983 # if !defined(DISABLE_PUTUTXLINE) && defined(HAVE_SETUTXENT) && \
984 defined(HAVE_PUTUTXLINE)
985 # define UTMPX_USE_LIBRARY
989 /* write a utmpx entry with the system's help (pututxline() and pals) */
990 # ifdef UTMPX_USE_LIBRARY
992 utmpx_write_library(struct logininfo *li, struct utmpx *utx)
997 # ifdef HAVE_ENDUTXENT
1003 # else /* UTMPX_USE_LIBRARY */
1005 /* write a utmp entry direct to the file */
1007 utmpx_write_direct(struct logininfo *li, struct utmpx *utx)
1009 logit("%s: not implemented!", __func__);
1012 # endif /* UTMPX_USE_LIBRARY */
1015 utmpx_perform_login(struct logininfo *li)
1019 construct_utmpx(li, &utx);
1020 # ifdef UTMPX_USE_LIBRARY
1021 if (!utmpx_write_library(li, &utx)) {
1022 logit("%s: utmp_write_library() failed", __func__);
1026 if (!utmpx_write_direct(li, &ut)) {
1027 logit("%s: utmp_write_direct() failed", __func__);
1036 utmpx_perform_logout(struct logininfo *li)
1040 construct_utmpx(li, &utx);
1041 # ifdef HAVE_ID_IN_UTMPX
1042 line_abbrevname(utx.ut_id, li->line, sizeof(utx.ut_id));
1044 # ifdef HAVE_TYPE_IN_UTMPX
1045 utx.ut_type = DEAD_PROCESS;
1048 # ifdef UTMPX_USE_LIBRARY
1049 utmpx_write_library(li, &utx);
1051 utmpx_write_direct(li, &utx);
1057 utmpx_write_entry(struct logininfo *li)
1061 return (utmpx_perform_login(li));
1063 return (utmpx_perform_logout(li));
1065 logit("%s: invalid type field", __func__);
1069 #endif /* USE_UTMPX */
1073 ** Low-level wtmp functions
1079 * Write a wtmp entry direct to the end of the file
1080 * This is a slight modification of code in OpenBSD's logwtmp.c
1083 wtmp_write(struct logininfo *li, struct utmp *ut)
1088 if ((fd = open(WTMP_FILE, O_WRONLY|O_APPEND, 0)) < 0) {
1089 logit("%s: problem writing %s: %s", __func__,
1090 WTMP_FILE, strerror(errno));
1093 if (fstat(fd, &buf) == 0)
1094 if (atomicio(vwrite, fd, ut, sizeof(*ut)) != sizeof(*ut)) {
1095 ftruncate(fd, buf.st_size);
1096 logit("%s: problem writing %s: %s", __func__,
1097 WTMP_FILE, strerror(errno));
1105 wtmp_perform_login(struct logininfo *li)
1109 construct_utmp(li, &ut);
1110 return (wtmp_write(li, &ut));
1115 wtmp_perform_logout(struct logininfo *li)
1119 construct_utmp(li, &ut);
1120 return (wtmp_write(li, &ut));
1125 wtmp_write_entry(struct logininfo *li)
1129 return (wtmp_perform_login(li));
1131 return (wtmp_perform_logout(li));
1133 logit("%s: invalid type field", __func__);
1140 * Notes on fetching login data from wtmp/wtmpx
1142 * Logouts are usually recorded with (amongst other things) a blank
1143 * username on a given tty line. However, some systems (HP-UX is one)
1144 * leave all fields set, but change the ut_type field to DEAD_PROCESS.
1146 * Since we're only looking for logins here, we know that the username
1147 * must be set correctly. On systems that leave it in, we check for
1148 * ut_type==USER_PROCESS (indicating a login.)
1150 * Portability: Some systems may set something other than USER_PROCESS
1151 * to indicate a login process. I don't know of any as I write. Also,
1152 * it's possible that some systems may both leave the username in
1153 * place and not have ut_type.
1156 /* return true if this wtmp entry indicates a login */
1158 wtmp_islogin(struct logininfo *li, struct utmp *ut)
1160 if (strncmp(li->username, ut->ut_name,
1161 MIN_SIZEOF(li->username, ut->ut_name)) == 0) {
1162 # ifdef HAVE_TYPE_IN_UTMP
1163 if (ut->ut_type & USER_PROCESS)
1173 wtmp_get_entry(struct logininfo *li)
1179 /* Clear the time entries in our logininfo */
1180 li->tv_sec = li->tv_usec = 0;
1182 if ((fd = open(WTMP_FILE, O_RDONLY)) < 0) {
1183 logit("%s: problem opening %s: %s", __func__,
1184 WTMP_FILE, strerror(errno));
1187 if (fstat(fd, &st) != 0) {
1188 logit("%s: couldn't stat %s: %s", __func__,
1189 WTMP_FILE, strerror(errno));
1194 /* Seek to the start of the last struct utmp */
1195 if (lseek(fd, -(off_t)sizeof(struct utmp), SEEK_END) == -1) {
1196 /* Looks like we've got a fresh wtmp file */
1202 if (atomicio(read, fd, &ut, sizeof(ut)) != sizeof(ut)) {
1203 logit("%s: read of %s failed: %s", __func__,
1204 WTMP_FILE, strerror(errno));
1208 if ( wtmp_islogin(li, &ut) ) {
1211 * We've already checked for a time in struct
1212 * utmp, in login_getlast()
1214 # ifdef HAVE_TIME_IN_UTMP
1215 li->tv_sec = ut.ut_time;
1217 # if HAVE_TV_IN_UTMP
1218 li->tv_sec = ut.ut_tv.tv_sec;
1221 line_fullname(li->line, ut.ut_line,
1222 MIN_SIZEOF(li->line, ut.ut_line));
1223 # ifdef HAVE_HOST_IN_UTMP
1224 strlcpy(li->hostname, ut.ut_host,
1225 MIN_SIZEOF(li->hostname, ut.ut_host));
1229 /* Seek back 2 x struct utmp */
1230 if (lseek(fd, -(off_t)(2 * sizeof(struct utmp)), SEEK_CUR) == -1) {
1231 /* We've found the start of the file, so quit */
1237 /* We found an entry. Tidy up and return */
1241 # endif /* USE_WTMP */
1245 ** Low-level wtmpx functions
1250 * Write a wtmpx entry direct to the end of the file
1251 * This is a slight modification of code in OpenBSD's logwtmp.c
1254 wtmpx_write(struct logininfo *li, struct utmpx *utx)
1256 #ifndef HAVE_UPDWTMPX
1260 if ((fd = open(WTMPX_FILE, O_WRONLY|O_APPEND, 0)) < 0) {
1261 logit("%s: problem opening %s: %s", __func__,
1262 WTMPX_FILE, strerror(errno));
1266 if (fstat(fd, &buf) == 0)
1267 if (atomicio(vwrite, fd, utx, sizeof(*utx)) != sizeof(*utx)) {
1268 ftruncate(fd, buf.st_size);
1269 logit("%s: problem writing %s: %s", __func__,
1270 WTMPX_FILE, strerror(errno));
1277 updwtmpx(WTMPX_FILE, utx);
1284 wtmpx_perform_login(struct logininfo *li)
1288 construct_utmpx(li, &utx);
1289 return (wtmpx_write(li, &utx));
1294 wtmpx_perform_logout(struct logininfo *li)
1298 construct_utmpx(li, &utx);
1299 return (wtmpx_write(li, &utx));
1304 wtmpx_write_entry(struct logininfo *li)
1308 return (wtmpx_perform_login(li));
1310 return (wtmpx_perform_logout(li));
1312 logit("%s: invalid type field", __func__);
1317 /* Please see the notes above wtmp_islogin() for information about the
1318 next two functions */
1320 /* Return true if this wtmpx entry indicates a login */
1322 wtmpx_islogin(struct logininfo *li, struct utmpx *utx)
1324 if (strncmp(li->username, utx->ut_user,
1325 MIN_SIZEOF(li->username, utx->ut_user)) == 0 ) {
1326 # ifdef HAVE_TYPE_IN_UTMPX
1327 if (utx->ut_type == USER_PROCESS)
1338 wtmpx_get_entry(struct logininfo *li)
1344 /* Clear the time entries */
1345 li->tv_sec = li->tv_usec = 0;
1347 if ((fd = open(WTMPX_FILE, O_RDONLY)) < 0) {
1348 logit("%s: problem opening %s: %s", __func__,
1349 WTMPX_FILE, strerror(errno));
1352 if (fstat(fd, &st) != 0) {
1353 logit("%s: couldn't stat %s: %s", __func__,
1354 WTMPX_FILE, strerror(errno));
1359 /* Seek to the start of the last struct utmpx */
1360 if (lseek(fd, -(off_t)sizeof(struct utmpx), SEEK_END) == -1 ) {
1361 /* probably a newly rotated wtmpx file */
1367 if (atomicio(read, fd, &utx, sizeof(utx)) != sizeof(utx)) {
1368 logit("%s: read of %s failed: %s", __func__,
1369 WTMPX_FILE, strerror(errno));
1374 * Logouts are recorded as a blank username on a particular
1375 * line. So, we just need to find the username in struct utmpx
1377 if (wtmpx_islogin(li, &utx)) {
1379 # if defined(HAVE_TV_IN_UTMPX)
1380 li->tv_sec = utx.ut_tv.tv_sec;
1381 # elif defined(HAVE_TIME_IN_UTMPX)
1382 li->tv_sec = utx.ut_time;
1384 line_fullname(li->line, utx.ut_line, sizeof(li->line));
1385 # if defined(HAVE_HOST_IN_UTMPX)
1386 strlcpy(li->hostname, utx.ut_host,
1387 MIN_SIZEOF(li->hostname, utx.ut_host));
1391 if (lseek(fd, -(off_t)(2 * sizeof(struct utmpx)), SEEK_CUR) == -1) {
1400 #endif /* USE_WTMPX */
1403 ** Low-level libutil login() functions
1408 syslogin_perform_login(struct logininfo *li)
1412 ut = xmalloc(sizeof(*ut));
1413 construct_utmp(li, ut);
1421 syslogin_perform_logout(struct logininfo *li)
1424 char line[UT_LINESIZE];
1426 (void)line_stripname(line, li->line, sizeof(line));
1429 logit("%s: logout() returned an error", __func__);
1430 # ifdef HAVE_LOGWTMP
1432 logwtmp(line, "", "");
1434 /* FIXME: (ATL - if the need arises) What to do if we have
1435 * login, but no logout? what if logout but no logwtmp? All
1436 * routines are in libutil so they should all be there,
1443 syslogin_write_entry(struct logininfo *li)
1447 return (syslogin_perform_login(li));
1449 return (syslogin_perform_logout(li));
1451 logit("%s: Invalid type field", __func__);
1455 #endif /* USE_LOGIN */
1457 /* end of file log-syslogin.c */
1460 ** Low-level lastlog functions
1465 #if !defined(LASTLOG_WRITE_PUTUTXLINE) || !defined(HAVE_GETLASTLOGXBYNAME)
1466 /* open the file (using filemode) and seek to the login entry */
1468 lastlog_openseek(struct logininfo *li, int *fd, int filemode)
1471 char lastlog_file[1024];
1474 if (stat(LASTLOG_FILE, &st) != 0) {
1475 logit("%s: Couldn't stat %s: %s", __func__,
1476 LASTLOG_FILE, strerror(errno));
1479 if (S_ISDIR(st.st_mode)) {
1480 snprintf(lastlog_file, sizeof(lastlog_file), "%s/%s",
1481 LASTLOG_FILE, li->username);
1482 } else if (S_ISREG(st.st_mode)) {
1483 strlcpy(lastlog_file, LASTLOG_FILE, sizeof(lastlog_file));
1485 logit("%s: %.100s is not a file or directory!", __func__,
1490 *fd = open(lastlog_file, filemode, 0600);
1492 debug("%s: Couldn't open %s: %s", __func__,
1493 lastlog_file, strerror(errno));
1497 if (S_ISREG(st.st_mode)) {
1498 /* find this uid's offset in the lastlog file */
1499 offset = (off_t) ((long)li->uid * sizeof(struct lastlog));
1501 if (lseek(*fd, offset, SEEK_SET) != offset) {
1502 logit("%s: %s->lseek(): %s", __func__,
1503 lastlog_file, strerror(errno));
1510 #endif /* !LASTLOG_WRITE_PUTUTXLINE || !HAVE_GETLASTLOGXBYNAME */
1512 #ifdef LASTLOG_WRITE_PUTUTXLINE
1514 lastlog_write_entry(struct logininfo *li)
1518 return 1; /* lastlog written by pututxline */
1520 logit("lastlog_write_entry: Invalid type field");
1524 #else /* LASTLOG_WRITE_PUTUTXLINE */
1526 lastlog_write_entry(struct logininfo *li)
1528 struct lastlog last;
1533 /* create our struct lastlog */
1534 memset(&last, '\0', sizeof(last));
1535 line_stripname(last.ll_line, li->line, sizeof(last.ll_line));
1536 strlcpy(last.ll_host, li->hostname,
1537 MIN_SIZEOF(last.ll_host, li->hostname));
1538 last.ll_time = li->tv_sec;
1540 if (!lastlog_openseek(li, &fd, O_RDWR|O_CREAT))
1543 /* write the entry */
1544 if (atomicio(vwrite, fd, &last, sizeof(last)) != sizeof(last)) {
1546 logit("%s: Error writing to %s: %s", __func__,
1547 LASTLOG_FILE, strerror(errno));
1554 logit("%s: Invalid type field", __func__);
1558 #endif /* LASTLOG_WRITE_PUTUTXLINE */
1560 #ifdef HAVE_GETLASTLOGXBYNAME
1562 lastlog_get_entry(struct logininfo *li)
1564 struct lastlogx l, *ll;
1566 if ((ll = getlastlogxbyname(li->username, &l)) == NULL) {
1567 memset(&l, '\0', sizeof(l));
1570 line_fullname(li->line, ll->ll_line, sizeof(li->line));
1571 strlcpy(li->hostname, ll->ll_host,
1572 MIN_SIZEOF(li->hostname, ll->ll_host));
1573 li->tv_sec = ll->ll_tv.tv_sec;
1574 li->tv_usec = ll->ll_tv.tv_usec;
1577 #else /* HAVE_GETLASTLOGXBYNAME */
1579 lastlog_get_entry(struct logininfo *li)
1581 struct lastlog last;
1584 if (!lastlog_openseek(li, &fd, O_RDONLY))
1587 ret = atomicio(read, fd, &last, sizeof(last));
1592 memset(&last, '\0', sizeof(last));
1595 line_fullname(li->line, last.ll_line, sizeof(li->line));
1596 strlcpy(li->hostname, last.ll_host,
1597 MIN_SIZEOF(li->hostname, last.ll_host));
1598 li->tv_sec = last.ll_time;
1601 error("%s: Error reading from %s: %s", __func__,
1602 LASTLOG_FILE, strerror(errno));
1605 error("%s: Error reading from %s: Expecting %d, got %d",
1606 __func__, LASTLOG_FILE, (int)sizeof(last), ret);
1613 #endif /* HAVE_GETLASTLOGXBYNAME */
1614 #endif /* USE_LASTLOG */
1616 #if defined(USE_UTMPX) && defined(HAVE_SETUTXDB) && \
1617 defined(UTXDB_LASTLOGIN) && defined(HAVE_GETUTXUSER)
1619 utmpx_get_entry(struct logininfo *li)
1623 if (setutxdb(UTXDB_LASTLOGIN, NULL) != 0)
1625 utx = getutxuser(li->username);
1631 line_fullname(li->line, utx->ut_line,
1632 MIN_SIZEOF(li->line, utx->ut_line));
1633 strlcpy(li->hostname, utx->ut_host,
1634 MIN_SIZEOF(li->hostname, utx->ut_host));
1635 li->tv_sec = utx->ut_tv.tv_sec;
1636 li->tv_usec = utx->ut_tv.tv_usec;
1640 #endif /* USE_UTMPX && HAVE_SETUTXDB && UTXDB_LASTLOGIN && HAVE_GETUTXUSER */
1644 * Logs failed login attempts in _PATH_BTMP if that exists.
1645 * The most common login failure is to give password instead of username.
1646 * So the _PATH_BTMP file checked for the correct permission, so that
1647 * only root can read it.
1651 record_failed_login(const char *username, const char *hostname,
1656 struct sockaddr_storage from;
1657 socklen_t fromlen = sizeof(from);
1658 struct sockaddr_in *a4;
1659 struct sockaddr_in6 *a6;
1665 if ((fd = open(_PATH_BTMP, O_WRONLY | O_APPEND)) < 0) {
1666 debug("Unable to open the btmp file %s: %s", _PATH_BTMP,
1670 if (fstat(fd, &fst) < 0) {
1671 logit("%s: fstat of %s failed: %s", __func__, _PATH_BTMP,
1675 if((fst.st_mode & (S_IRWXG | S_IRWXO)) || (fst.st_uid != 0)){
1676 logit("Excess permission or bad ownership on file %s",
1681 memset(&ut, 0, sizeof(ut));
1682 /* strncpy because we don't necessarily want nul termination */
1683 strncpy(ut.ut_user, username, sizeof(ut.ut_user));
1684 strlcpy(ut.ut_line, "ssh:notty", sizeof(ut.ut_line));
1687 ut.ut_time = t; /* ut_time is not always a time_t */
1688 ut.ut_type = LOGIN_PROCESS;
1689 ut.ut_pid = getpid();
1691 /* strncpy because we don't necessarily want nul termination */
1692 strncpy(ut.ut_host, hostname, sizeof(ut.ut_host));
1694 if (packet_connection_is_on_socket() &&
1695 getpeername(packet_get_connection_in(),
1696 (struct sockaddr *)&from, &fromlen) == 0) {
1697 ipv64_normalise_mapped(&from, &fromlen);
1698 if (from.ss_family == AF_INET) {
1699 a4 = (struct sockaddr_in *)&from;
1700 memcpy(&ut.ut_addr, &(a4->sin_addr),
1701 MIN_SIZEOF(ut.ut_addr, a4->sin_addr));
1703 #ifdef HAVE_ADDR_V6_IN_UTMP
1704 if (from.ss_family == AF_INET6) {
1705 a6 = (struct sockaddr_in6 *)&from;
1706 memcpy(&ut.ut_addr_v6, &(a6->sin6_addr),
1707 MIN_SIZEOF(ut.ut_addr_v6, a6->sin6_addr));
1712 if (atomicio(vwrite, fd, &ut, sizeof(ut)) != sizeof(ut))
1713 error("Failed to write to %s: %s", _PATH_BTMP,
1719 #endif /* USE_BTMP */