Matthew Dillon [Sat, 2 Aug 2008 14:34:29 +0000 (14:34 +0000)]
MFC 1.117 - fix desiredvnodes calculation for machines with >2G ram.
Requested-by: Francois Tigeot <ftigeot@wolfpond.org>
Sascha Wildner [Thu, 31 Jul 2008 20:09:43 +0000 (20:09 +0000)]
Sync with HEAD.
Michael Neumann [Wed, 30 Jul 2008 07:53:01 +0000 (07:53 +0000)]
MFC:
Implement mounting of a Hammer filesystem as a root filesystem.
To mount a Hammer filesystem as root filesystem (e.g. /dev/ad0s1d),
you have to specify the following in /boot/loader.conf:
vfs.root.mountfrom="hammer:ad0s1d"
Sascha Wildner [Tue, 29 Jul 2008 13:10:57 +0000 (13:10 +0000)]
MFC:
Update for 2.0.
Reported-by: Michael Neumann <mneumann@ntecs.de>
Sascha Wildner [Sun, 27 Jul 2008 22:12:03 +0000 (22:12 +0000)]
MFC:
Actually install packages into ${ISOROOT}.
Submitted-by: corecode
Reported-by: M.K. <mk@freeweb.ozi.nu>
Dragonfly-bug: <http://bugs.dragonflybsd.org/issue1092>
Sascha Wildner [Sun, 27 Jul 2008 21:14:41 +0000 (21:14 +0000)]
MFC: Fix comments.
Matthew Dillon [Sat, 26 Jul 2008 21:24:50 +0000 (21:24 +0000)]
MFC: An off-by-one malloc size was corrupting the installer's memory,
causing the time-zone selector to seg-fault.
Submitted-by: Pierre Riteau <pierre.riteau@gmail.com>
Sepherosa Ziehau [Sat, 26 Jul 2008 15:42:06 +0000 (15:42 +0000)]
MFC rev 1.89:
Bring following change from FreeBSD (yar@freebsd.org):
uipc_syscall.c rev 1.154
If connect(2) has been interrupted by a signal and therefore the
connection is to be established asynchronously, behave as in the
- keep the SS_ISCONNECTING bit set thus indicating that
the connection establishment is in progress, which is the case
(clearing the bit in this case was just a bug);
- return EALREADY, instead of the confusing and unreasonable
EADDRINUSE, upon further connect(2) attempts on this socket
until the connection is established (this also brings our
connect(2) into accord with IEEE Std 1003.1.)
Tested-by: y0netan1@
Reviewed-by: hsu@
Dragonfly-bug: <http://bugs.dragonflybsd.org/issue1079>
Matthew Dillon [Sat, 26 Jul 2008 05:37:20 +0000 (05:37 +0000)]
HAMMER commit - MFC ref count related panics when a HAMMER mount fails, etc.
Sepherosa Ziehau [Sat, 26 Jul 2008 04:58:41 +0000 (04:58 +0000)]
MFC if_ethersubr.c rev1.77:
Simplify ether_mport(). This also fixes the bug that m0 is not cleared in
the first place, which causes caller panik.
Reported-by: elekktretterr@exemail.com.au
Sascha Wildner [Fri, 25 Jul 2008 03:18:44 +0000 (03:18 +0000)]
MFC: Fix typos.
Sascha Wildner [Fri, 25 Jul 2008 03:18:36 +0000 (03:18 +0000)]
MFC: Document -f.
Sascha Wildner [Fri, 25 Jul 2008 03:16:12 +0000 (03:16 +0000)]
Sync with HEAD.
Matthew Dillon [Thu, 24 Jul 2008 05:41:56 +0000 (05:41 +0000)]
MFC adjustments to newfs_hammer for minimum UNDO FIFO space.
Sascha Wildner [Tue, 22 Jul 2008 15:43:06 +0000 (15:43 +0000)]
MFC:
Fix path for the package tools.
Reported-by: Archimedes Gaviola <archimedes.gaviola@gmail.com>
Matthew Dillon [Sat, 19 Jul 2008 22:15:16 +0000 (22:15 +0000)]
MFC change 'default' to 'English'
Matthew Dillon [Sat, 19 Jul 2008 20:26:17 +0000 (20:26 +0000)]
Pre-2.0 release: Sync with HAMMER 65 - simplify PFS operations.
Matthew Dillon [Sat, 19 Jul 2008 18:49:09 +0000 (18:49 +0000)]
Pre-2.0 release: Sync with HAMMER 64 - simplify PFS operations.
Matthew Dillon [Sat, 19 Jul 2008 18:46:20 +0000 (18:46 +0000)]
Pre-2.0 release: Sync with HAMMER 64 - simplify PFS operations, fix pfs-upgrade
Matthias Schmidt [Sat, 19 Jul 2008 12:26:26 +0000 (12:26 +0000)]
Adjust path for the upcoming 2.0 release
Matthew Dillon [Sat, 19 Jul 2008 07:54:37 +0000 (07:54 +0000)]
MFC corrected printing of the slice number when adding a GPT partition.
Reported-by: Thomas Nikolajsen <thomas.nikolajsen@mail.dk>
Matthew Dillon [Sat, 19 Jul 2008 04:51:09 +0000 (04:51 +0000)]
Pre-2.0 release: Sync with HAMMER 64 - NFS and cross-device link fixes.
Matthew Dillon [Sat, 19 Jul 2008 04:44:15 +0000 (04:44 +0000)]
MFC 1.25: O_CREAT was being allowed to leak through a read-only NFS export.
Sascha Wildner [Fri, 18 Jul 2008 23:30:10 +0000 (23:30 +0000)]
Remove outdated hammer.txt.
Sascha Wildner [Fri, 18 Jul 2008 23:28:02 +0000 (23:28 +0000)]
Sync with HEAD.
Sascha Wildner [Fri, 18 Jul 2008 23:25:05 +0000 (23:25 +0000)]
MFC: Fix message.
Matthew Dillon [Fri, 18 Jul 2008 03:52:01 +0000 (03:52 +0000)]
Pre-2.0 release, MFC some driver fixes related to interrupt management.
Matthew Dillon [Fri, 18 Jul 2008 03:50:00 +0000 (03:50 +0000)]
Pre-2.0 release, MFC firewire disk changes to properly detach SIMs.
Sascha Wildner [Fri, 18 Jul 2008 00:30:02 +0000 (00:30 +0000)]
MFC: Set count to a negative value for an initial burst.
Matthew Dillon [Fri, 18 Jul 2008 00:21:09 +0000 (00:21 +0000)]
Pre-2.0 release, MFC 63 - HAMMER I/O error handling and catastrophic
umount support.
Matthew Dillon [Fri, 18 Jul 2008 00:13:23 +0000 (00:13 +0000)]
MFC 1.45 for the 2.0 release: Properly set B_INVAL after failed read.
Matthew Dillon [Fri, 18 Jul 2008 00:08:23 +0000 (00:08 +0000)]
MFC CAM fixes for the 2.0 release.
Thomas Nikolajsen [Fri, 18 Jul 2008 00:07:54 +0000 (00:07 +0000)]
MFC:
Capitalize TAP and add some markup.
Thomas Nikolajsen [Fri, 18 Jul 2008 00:05:26 +0000 (00:05 +0000)]
MFC:
Add VKERNEL to FILES and make some paths a bit shorter.
Thomas Nikolajsen [Fri, 18 Jul 2008 00:02:59 +0000 (00:02 +0000)]
MFC:
Add VKERNEL.
Matthew Dillon [Fri, 18 Jul 2008 00:02:10 +0000 (00:02 +0000)]
MFC 1.113 - buffer cache adjustments for handling write errors.
Thomas Nikolajsen [Fri, 18 Jul 2008 00:00:19 +0000 (00:00 +0000)]
MFC:
Update newfs_hammer doc:
- sync usage() & newfs_hammer.8
- add a cross reference
Thomas Nikolajsen [Thu, 17 Jul 2008 23:58:08 +0000 (23:58 +0000)]
MFC: following 2 commits:
Update mount_hammer doc:
- sync usage() & mount_hammer.8
- add missing \n to usage()
- rename transactionid to transaction-id to ease reading
- describe that special files can be `:' separated
- add some more cross references
Add a pointer to hammer(5) and fix some minor issues.
Matthew Dillon [Thu, 17 Jul 2008 23:56:43 +0000 (23:56 +0000)]
MFC 1.21: Give krateprintf() a burst capability.
Thomas Nikolajsen [Thu, 17 Jul 2008 23:54:06 +0000 (23:54 +0000)]
MFC:
Update mount_hammer doc:
- sync usage() & mount_hammer.8
- add missing \n to usage()
- rename transactionid to transaction-id to ease reading
- describe that special files can be `:' separated
- add some more cross references
Thomas Nikolajsen [Thu, 17 Jul 2008 23:50:02 +0000 (23:50 +0000)]
MFC: following 4 commits:
undo(1) doc fixes:
- sync usage() to undo.1
- improve wording a bit in a few places
Update `-t' flag; now it is always transaction-id.
Add logic to warn of possible renames, and clearly state when failures may
be due to prior renames.
Change -h to -a (-a for 'all'), which is a more obvious option name.
Add missing space and newline to error message.
Thomas Nikolajsen [Thu, 17 Jul 2008 23:36:58 +0000 (23:36 +0000)]
MFC: HAMMER can now be demand-loaded.
Sascha Wildner [Thu, 17 Jul 2008 10:18:37 +0000 (10:18 +0000)]
Sync with HEAD.
Sascha Wildner [Thu, 17 Jul 2008 10:18:06 +0000 (10:18 +0000)]
MFC: Enable building of hammer.ko.
Matthias Schmidt [Thu, 17 Jul 2008 09:25:51 +0000 (09:25 +0000)]
Change the man page ident string from 1.13 to 2.0 for the release
Sascha Wildner [Wed, 16 Jul 2008 21:11:27 +0000 (21:11 +0000)]
Merge 1.17: Add hammer(5).
branch-fixup [Wed, 16 Jul 2008 20:39:28 +0000 (20:39 +0000)]
Add files from parent branch HEAD:
share/man/man5/hammer.5
Matthew Dillon [Wed, 16 Jul 2008 18:39:32 +0000 (18:39 +0000)]
Pre-2.0 release, synchronize with HAMMER 62
Matthew Dillon [Wed, 16 Jul 2008 18:22:25 +0000 (18:22 +0000)]
MFC 1.79 - fix lock leak in nfs_create().
Matthew Dillon [Tue, 15 Jul 2008 22:14:40 +0000 (22:14 +0000)]
Pre-2.0 release, synchronize with HAMMER 61H
Matthew Dillon [Tue, 15 Jul 2008 18:04:54 +0000 (18:04 +0000)]
Pre-2.0 release, synchronize with HAMMER 61G
Sascha Wildner [Tue, 15 Jul 2008 02:32:09 +0000 (02:32 +0000)]
MFC: Exclude acd* and fd* from the list of disks.
Matthew Dillon [Tue, 15 Jul 2008 01:24:54 +0000 (01:24 +0000)]
MFC: Fix an issue w/libthread_xu's priority ranges.
branch-fixup [Mon, 14 Jul 2008 23:57:10 +0000 (23:57 +0000)]
Add files from parent branch HEAD:
usr.sbin/installer/libinstaller/survey.c.patch
Matthew Dillon [Mon, 14 Jul 2008 22:23:45 +0000 (22:23 +0000)]
MFC 1.14: Fix bug where mount_nfs w/ IP address could still fail if
name resolution is down.
Matthew Dillon [Mon, 14 Jul 2008 22:19:42 +0000 (22:19 +0000)]
MFC 1.36: Fix a bug in the mount scan.
Matthew Dillon [Mon, 14 Jul 2008 17:46:41 +0000 (17:46 +0000)]
MFC NFS performance fixes.
Matthew Dillon [Mon, 14 Jul 2008 04:20:39 +0000 (04:20 +0000)]
2.0 Release Engineering:
* Post-branch adjustments for 2.0-release
Matthew Dillon [Mon, 14 Jul 2008 03:50:00 +0000 (03:50 +0000)]
2.0 Release Engineering:
* cvsup file, slip tag target
Matthew Dillon [Mon, 14 Jul 2008 03:46:52 +0000 (03:46 +0000)]
2.0 Release Engineering:
* Bump DragonFly_version
* Bump HEAD sub-vers
Matthew Dillon [Mon, 14 Jul 2008 03:21:34 +0000 (03:21 +0000)]
HAMMER Utilities: Features
* hammer show: report the CRC in verbose mode.
Matthew Dillon [Mon, 14 Jul 2008 03:20:49 +0000 (03:20 +0000)]
HAMMER 61F/Many: Stabilization w/ simultanious pruning and reblocking
* BUG FIX: When doing direct-read check to see if any device buffers
are aliasing the disk block and flush any we find which are dirty.
This ensures that reblocked data gets to disk before a direct-read
tries to read them FROM the disk.
* BUG FIX: Fix a bug introduced in a recent commit where the flusher
wlll not always completely flush the UNDO FIFO or completely flush
all meta-data, resulting in a rollback after a normal umount/mount.
* BUG FIX: Direct-writes queue I/O independant of the in-memory record.
When the backend flusher flushes the record, making it available in the
B-Tree, make sure that the indepent I/O has completed. Otherwise
a later reblocking operation might read the media before the direct-write
has actually completed.
* BUG FIX: In-memory records are not subject direct-IO, since their data
is not yet on the media.
* BUG FIX: Do not allow mount to succeed unless all volumes have been found.
(Reported-by: Sascha Wildner <saw@online.de>)
* BUG FIX: The bd_heatup() call in the reblocker was in the wrong place,
potentially causing the cursor to shift unexpectedly.
* Reorient some of the buffer invalidation code by enhancing
the reservation code.
* Add read CRC verification logic for some direct-reads, but comment it out
because the VM system's bogus-page replacement breaks it.
Matthew Dillon [Mon, 14 Jul 2008 03:09:00 +0000 (03:09 +0000)]
Kernel support for HAMMER:
* Add another type to the bio->bio_caller_info1 union
* Add two new flags to getblk(), used by the cluster code.
GETBLK_SZMATCH - Tell getblk() to fail and return NULL if a
pre-existing buffer's size does not match
the requested size (this prevents getblk()
from doing a potentially undesired bwrite()
sequence).
GETBLK_NOWAIT - Tell getblk() to use a non-blocking lock.
* pop_bio() now returns the previous BIO (or NULL if there is no previous
BIO). This allows HAMMER to chain bio_done()'s
* Fix a bug in cluster_read(). The cluster code's read-ahead at the
end could go past the caller-specified limit and force a block to
the wrong block size.
Matthew Dillon [Mon, 14 Jul 2008 00:09:42 +0000 (00:09 +0000)]
Fix an asf core dump.
Submitted-by: ejc <eric.j.christeson@gmail.com>
Sascha Wildner [Sun, 13 Jul 2008 22:18:18 +0000 (22:18 +0000)]
Sync the 'hammer show' description with reality.
Sascha Wildner [Sun, 13 Jul 2008 22:14:16 +0000 (22:14 +0000)]
Uniformly refer to 'B-tree'.
Sepherosa Ziehau [Sun, 13 Jul 2008 11:02:50 +0000 (11:02 +0000)]
Unload the bus dmamap, which was successfully loaded
Sascha Wildner [Sun, 13 Jul 2008 10:55:05 +0000 (10:55 +0000)]
We're building live CDs using the installer in base for some time now,
so they don't need to identify anymore as being built with it.
Nicolas Thery [Sun, 13 Jul 2008 10:28:51 +0000 (10:28 +0000)]
Fix deadlock occuring when booting vkernel from gdb. One lwp in the vkernel
sends a signal to another one and is preempted by the signal receiving one in
userexit(). As the vkernel is traced, the vkernel process is stopped and the
receiving lwp stops too. The emitting lwp then resumes and blocks later on a
condition variable. The gdb process sleeps on wait(2) which never completes
because the emitting lwp is not stopped.
To prevent this, stop lwps in userexit(), after lwkt_reschedule, if their
owning process is stopped.
Reported-by: Simon Schubert <corecode@fs.ei.tum.de>
Matthew Dillon [Sun, 13 Jul 2008 09:32:48 +0000 (09:32 +0000)]
HAMMER 61E/Many: Stabilization, Performance
* PERFORMANCE: hammer_sync_inode() was generating a new transaction id
for each inode, causing hammer_btree_do_propagation() to have to
modify B-Tree nodes all the way to root on a per-file basis when
syncing a rm -rf.
Change the code to use the flusher's transaction id so all inodes
bundled into the same flush group use the same transaction id.
* BUG FIX: The reblocker was able to blow out the buffer cache with
dirty data buffers. Even though HAMMER allows these buffers to be
flushed to the disk at any time by the kernel, calls to bwillwrite()
are still needed to prevent a buffer cache deadlock.
Sepherosa Ziehau [Sun, 13 Jul 2008 03:57:41 +0000 (03:57 +0000)]
Increate receive max coalesced bds to 80 to prevent system from being
livelocked when 64bytes packets are injected @1.48Mpps.
It's RX side interrupt moderation logic is quite similar to et(4)'s:
(# recved packets > recv max coalesced bds) || (ticks > recv coalescing ticks)
# The 5750A1 I have tested could only sink packets @1.26Mpps
Matthew Dillon [Sun, 13 Jul 2008 03:37:43 +0000 (03:37 +0000)]
Use a 64 bit quantity to collect file size data instead of
32 bits, fixing overflows in the printed output.
Requested-by: "Trevor Kendall" <trevorjkendall@gmail.com>
Sascha Wildner [Sun, 13 Jul 2008 02:02:40 +0000 (02:02 +0000)]
perror() will print its own colon.
Matthew Dillon [Sun, 13 Jul 2008 01:12:41 +0000 (01:12 +0000)]
HAMMER 61G/Many: Stabilization of new flush_group code
* The mirroring, reblocking, and pruning code are now more robust in
checking that too many meta-data buffers have not built up.
* Fix a bug in the flusher (today's flusher work) where pure meta-data
changes to the media were not being flushed unless there was also a
modified inode or two to flush.
Sascha Wildner [Sun, 13 Jul 2008 00:56:06 +0000 (00:56 +0000)]
Typo fixing & minor cleanup.
Matthew Dillon [Sat, 12 Jul 2008 23:55:22 +0000 (23:55 +0000)]
HAMMER 61F2/Many: Fix bug in last commit
* ip -> dip (pun intended)
Matthew Dillon [Sat, 12 Jul 2008 23:47:13 +0000 (23:47 +0000)]
HAMMER 61F/Many: Stabilization
* Fix a bug triggered by rm -rf where HAMMER was failling to wait for
reclaimed inodes to drain, allowing a build-up that would result in
a kmalloc() pool-full panic.
Add a required call to hammer_inode_waitreclaims() in the dounlink
code. Because this code acquires and releases inodes without having
to mess around with related vnodes, it bypassed the reclaim checks in
the vnode path.
Reported-by: Michael Neumann <mneumann@ntecs.de>
Matthew Dillon [Sat, 12 Jul 2008 23:05:30 +0000 (23:05 +0000)]
HAMMER Utilities: Cleanup
* Cleanup the printfs for mirror-read, mirror-write, and mirror-copy.
Matthew Dillon [Sat, 12 Jul 2008 23:04:50 +0000 (23:04 +0000)]
HAMMER 61E/Many: Stabilization, Performance
* The UNDO FIFO could get over-full, causing an assertion. This was because
certain load tests could cuase directories to end up with tens of
thousands of directory entries and all of them were being flushed in
a single flush group.
Rewrite the flush group infrastructure to fix the issue. Instead of
having a two-stage flush we now have flush compartmentalization with
the new hammer_flush_group structure. Flushes can thus be broken down
into transactions that don't blow out the UNDO FIFO.
* Improve flush performance by quite a bit. The new infrastructure
generates fewer B-Tree conflicts and appears to flush the work more
smoothly, probably owing to the fact that the upper size of each
flush group is now bounded.
Peter Avalos [Sat, 12 Jul 2008 20:36:06 +0000 (20:36 +0000)]
Add quirk for the Samsung YP-U3.
Obtained-from: FreeBSD
Michael Neumann [Sat, 12 Jul 2008 16:52:48 +0000 (16:52 +0000)]
Fix an venerable bug: if we're reducing a rule that has an empty
right hand side and the yacc stackpointer is pointing at the very
end of the allocated stack, we end up accessing the stack out of
bounds by the implicit $$ = $1 action.
Obtained-from: OpenBSD (skeleton.c rev 1.29)
Michael Neumann [Sat, 12 Jul 2008 16:38:10 +0000 (16:38 +0000)]
* Add support for the nVidia MCP61, MCP65, MCP67, MCP73 and MCP77
series chipsets.
Obtained-from: FreeBSD
(ata-chipset.c rev 1.198 and parts of 1.204)
(ata-pci.h rev 1.77 and 1.82)
* Fix clearing of nVidia interrupts.
Obtained-from: FreeBSD
(ata-chipset.c rev 1.214)
* Add support for MCP67 (revision 0xa2) not found in FreeBSD.
Peter Avalos [Sat, 12 Jul 2008 14:57:33 +0000 (14:57 +0000)]
Update build structure for libarchive-2.5.5.
Start building bsdcpio. It is not the default, but it can be installed by
setting WITH_BSDCPIO. bsdcpio will become the default in 2.1, and GNU cpio
will be removed in 2.3.
Peter Avalos [Sat, 12 Jul 2008 14:42:23 +0000 (14:42 +0000)]
Merge from vendor branch LIBARCHIVE:
Import libarchive-2.5.5.
Peter Avalos [Sat, 12 Jul 2008 14:42:23 +0000 (14:42 +0000)]
Import libarchive-2.5.5.
Sepherosa Ziehau [Sat, 12 Jul 2008 11:44:17 +0000 (11:44 +0000)]
- Check number of free TX descs before trying to xmit packets
- Recollect TX descs in nfe_start() if nfe(4) is going to enter OACTIVE
- Use dynamic segment limit for bus_dmamap_load() in nfe_encap()
This change gives me following result on AMD64X2 3600+ with MCP51:
10 seconds, TX 64bytes packets, before/after
256 TX desc
imtimer | packets | if_snd full | if_oerrors
-125 1.08M/1.08M 84532/82786 90/0
-250 990K/1.08M 3735886/157125 38872/0
4096 TX desc
imtimer | packets | if_snd full | if_oerrors
-125 1.08M/1.09M 0/0 45/0
-250 1.08M/1.10M 0/0 39/0
It gives great improvement when number of TX desc is 256 (default),
and it at least will not loose any packets if number TX desc is 4096.
Sepherosa Ziehau [Sat, 12 Jul 2008 09:31:08 +0000 (09:31 +0000)]
Add brief description about tx_ring_count
Sepherosa Ziehau [Sat, 12 Jul 2008 09:27:49 +0000 (09:27 +0000)]
Add tunable for number of TX desc
Sepherosa Ziehau [Sat, 12 Jul 2008 06:50:04 +0000 (06:50 +0000)]
Prepare to rework nfe_start():
Allow number of segments to exceeds the limit set by the caller; caller
detects and handles this error accordingly.
Sepherosa Ziehau [Sat, 12 Jul 2008 06:16:22 +0000 (06:16 +0000)]
- Decrease NFE_MAX_SCATTER to 32, should be enough
- Increase ifnet.if_snd length to (NFE_TX_RING_COUNT - 1)
Sepherosa Ziehau [Sat, 12 Jul 2008 06:01:37 +0000 (06:01 +0000)]
Use softc sc_rx_ring_count to allocate jumbo frame instead of nfe_rx_ring_count
Sepherosa Ziehau [Sat, 12 Jul 2008 05:48:32 +0000 (05:48 +0000)]
- Correct max segment size passed to various bus_dma_tag_create()
- Pass softc's sysctl context to SYSCTL_ADD_INT
- Allow jumbo frame allocation to fail during attach. If jumbo frame
allocation failed, then MTU was not allowed to set above ETHERMTU
- Don't reinitialize device, if MTU is changed but the device is not
running yet
Matthew Dillon [Sat, 12 Jul 2008 02:48:46 +0000 (02:48 +0000)]
HAMMER Utillities: Sync with 61D
* Add the new pfs-upgrade, pfs-downgrade, and pfs-destroy directives.
* Add more safeties to the PFS directives.
Matthew Dillon [Sat, 12 Jul 2008 02:47:39 +0000 (02:47 +0000)]
HAMMER 61D/Many: Mirroring features
* Split PFS ioctls into their own source file.
* Add additional PFS/mirroring directives: pfs-upgrade, pfs-downgrade, and
finish implementing pfs-destroy. (Yes, that means you can change the
master/slave mode for a PFS now).
* Consolidate some of the B-Tree deletion code.
* Fix another sync_lock deadlock.
Matthew Dillon [Sat, 12 Jul 2008 02:44:59 +0000 (02:44 +0000)]
Correct a bug in the last commit.
Matthew Dillon [Sat, 12 Jul 2008 01:09:46 +0000 (01:09 +0000)]
Add a vclean_unlocked() call that allows HAMMER to try to get rid of a
vnode.
Thomas Nikolajsen [Fri, 11 Jul 2008 23:42:46 +0000 (23:42 +0000)]
Tunables are called loader tunables; fix this in a few places.
Thomas Nikolajsen [Fri, 11 Jul 2008 23:09:18 +0000 (23:09 +0000)]
Update netstat help:
- sync usage() with netstat.1
- describe that -W shows MPLS label operations
- add description of protocol families and carp(4)
- add cross references to inet6(4) and carp(4)
Jeremy C. Reed [Fri, 11 Jul 2008 22:42:30 +0000 (22:42 +0000)]
Add patch from 9.3.5 to 9.3.5-P1. This is for adding randomization
for every query.
The patch for the security issues from 9.3.5 to 9.3.5-P1 (minus
win32 and doc) applies fine to HEAD contrib/bind-9.3 (which is
9.3.4-P1) other than a few RCS ident conflicts.
I made up my own version name for this for DragonFly: 9.3.4-P2.
This is for
http://www.kb.cert.org/vuls/id/800113
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2008-1447
Note that this -P1 patch is the unoptimized version.
Also on busy recursive caching systems you may need to set limits
to allow many sockets.
This also removes comment from DragonFly's named.conf as
that is now a "warning" and is not recommended. Remove any
query-source restriction for one port or this patch will not be used.
Thomas Nikolajsen [Fri, 11 Jul 2008 18:42:14 +0000 (18:42 +0000)]
Update LINT:
- add reference to kernconf(5)
- copy description of SMP from GENERIC,
espcially that APIC_IO can be laft out
- truncate description of polling(4) & dummynet(4),
ensure reference to polling(4) & dummynet(4).
This also removed outdated description of dependency on HZ.
Corret information is in manual pages; it is best to have it in one place.
- point out that SOFTUPDATES applies to UFS only.
- add HAMMER to list of filesystems which cant be build as module.
- point outthat ATA_STATIC_ID is for NATA also, not just ATA.