2 * Copyright (c) 1994,1997 John S. Dyson
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice immediately at the beginning of the file, without modification,
10 * this list of conditions, and the following disclaimer.
11 * 2. Absolutely no warranty of function or purpose is made by the author
14 * $FreeBSD: src/sys/kern/vfs_bio.c,v 1.242.2.20 2003/05/28 18:38:10 alc Exp $
15 * $DragonFly: src/sys/kern/vfs_bio.c,v 1.22 2004/03/31 15:32:53 drhodus Exp $
19 * this file contains a new buffer I/O scheme implementing a coherent
20 * VM object and buffer cache scheme. Pains have been taken to make
21 * sure that the performance degradation associated with schemes such
22 * as this is not realized.
24 * Author: John S. Dyson
25 * Significant help during the development and debugging phases
26 * had been provided by David Greenman, also of the FreeBSD core team.
28 * see man buf(9) for more info.
31 #include <sys/param.h>
32 #include <sys/systm.h>
35 #include <sys/eventhandler.h>
37 #include <sys/malloc.h>
38 #include <sys/mount.h>
39 #include <sys/kernel.h>
40 #include <sys/kthread.h>
42 #include <sys/reboot.h>
43 #include <sys/resourcevar.h>
44 #include <sys/sysctl.h>
45 #include <sys/vmmeter.h>
46 #include <sys/vnode.h>
49 #include <vm/vm_param.h>
50 #include <vm/vm_kern.h>
51 #include <vm/vm_pageout.h>
52 #include <vm/vm_page.h>
53 #include <vm/vm_object.h>
54 #include <vm/vm_extern.h>
55 #include <vm/vm_map.h>
57 #include <vm/vm_page2.h>
59 static MALLOC_DEFINE(M_BIOBUF, "BIO buffer", "BIO buffer");
61 struct bio_ops bioops; /* I/O operation notification */
63 struct buf *buf; /* buffer header pool */
64 struct swqueue bswlist;
66 static void vm_hold_free_pages(struct buf * bp, vm_offset_t from,
68 static void vm_hold_load_pages(struct buf * bp, vm_offset_t from,
70 static void vfs_page_set_valid(struct buf *bp, vm_ooffset_t off,
71 int pageno, vm_page_t m);
72 static void vfs_clean_pages(struct buf * bp);
73 static void vfs_setdirty(struct buf *bp);
74 static void vfs_vmio_release(struct buf *bp);
75 static void vfs_backgroundwritedone(struct buf *bp);
76 static int flushbufqueues(void);
78 static int bd_request;
80 static void buf_daemon (void);
82 * bogus page -- for I/O to/from partially complete buffers
83 * this is a temporary solution to the problem, but it is not
84 * really that bad. it would be better to split the buffer
85 * for input in the case of buffers partially already in memory,
86 * but the code is intricate enough already.
89 int vmiodirenable = TRUE;
91 struct lwkt_token buftimetoken; /* Interlock on setting prio and timo */
93 static vm_offset_t bogus_offset;
95 static int bufspace, maxbufspace,
96 bufmallocspace, maxbufmallocspace, lobufspace, hibufspace;
97 static int bufreusecnt, bufdefragcnt, buffreekvacnt;
98 static int needsbuffer;
99 static int lorunningspace, hirunningspace, runningbufreq;
100 static int numdirtybuffers, lodirtybuffers, hidirtybuffers;
101 static int numfreebuffers, lofreebuffers, hifreebuffers;
102 static int getnewbufcalls;
103 static int getnewbufrestarts;
105 SYSCTL_INT(_vfs, OID_AUTO, numdirtybuffers, CTLFLAG_RD,
106 &numdirtybuffers, 0, "");
107 SYSCTL_INT(_vfs, OID_AUTO, lodirtybuffers, CTLFLAG_RW,
108 &lodirtybuffers, 0, "");
109 SYSCTL_INT(_vfs, OID_AUTO, hidirtybuffers, CTLFLAG_RW,
110 &hidirtybuffers, 0, "");
111 SYSCTL_INT(_vfs, OID_AUTO, numfreebuffers, CTLFLAG_RD,
112 &numfreebuffers, 0, "");
113 SYSCTL_INT(_vfs, OID_AUTO, lofreebuffers, CTLFLAG_RW,
114 &lofreebuffers, 0, "");
115 SYSCTL_INT(_vfs, OID_AUTO, hifreebuffers, CTLFLAG_RW,
116 &hifreebuffers, 0, "");
117 SYSCTL_INT(_vfs, OID_AUTO, runningbufspace, CTLFLAG_RD,
118 &runningbufspace, 0, "");
119 SYSCTL_INT(_vfs, OID_AUTO, lorunningspace, CTLFLAG_RW,
120 &lorunningspace, 0, "");
121 SYSCTL_INT(_vfs, OID_AUTO, hirunningspace, CTLFLAG_RW,
122 &hirunningspace, 0, "");
123 SYSCTL_INT(_vfs, OID_AUTO, maxbufspace, CTLFLAG_RD,
124 &maxbufspace, 0, "");
125 SYSCTL_INT(_vfs, OID_AUTO, hibufspace, CTLFLAG_RD,
127 SYSCTL_INT(_vfs, OID_AUTO, lobufspace, CTLFLAG_RD,
129 SYSCTL_INT(_vfs, OID_AUTO, bufspace, CTLFLAG_RD,
131 SYSCTL_INT(_vfs, OID_AUTO, maxmallocbufspace, CTLFLAG_RW,
132 &maxbufmallocspace, 0, "");
133 SYSCTL_INT(_vfs, OID_AUTO, bufmallocspace, CTLFLAG_RD,
134 &bufmallocspace, 0, "");
135 SYSCTL_INT(_vfs, OID_AUTO, getnewbufcalls, CTLFLAG_RW,
136 &getnewbufcalls, 0, "");
137 SYSCTL_INT(_vfs, OID_AUTO, getnewbufrestarts, CTLFLAG_RW,
138 &getnewbufrestarts, 0, "");
139 SYSCTL_INT(_vfs, OID_AUTO, vmiodirenable, CTLFLAG_RW,
140 &vmiodirenable, 0, "");
141 SYSCTL_INT(_vfs, OID_AUTO, bufdefragcnt, CTLFLAG_RW,
142 &bufdefragcnt, 0, "");
143 SYSCTL_INT(_vfs, OID_AUTO, buffreekvacnt, CTLFLAG_RW,
144 &buffreekvacnt, 0, "");
145 SYSCTL_INT(_vfs, OID_AUTO, bufreusecnt, CTLFLAG_RW,
146 &bufreusecnt, 0, "");
149 * Disable background writes for now. There appear to be races in the
150 * flags tests and locking operations as well as races in the completion
151 * code modifying the original bp (origbp) without holding a lock, assuming
152 * splbio protection when there might not be splbio protection.
154 static int dobkgrdwrite = 0;
155 SYSCTL_INT(_debug, OID_AUTO, dobkgrdwrite, CTLFLAG_RW, &dobkgrdwrite, 0,
156 "Do background writes (honoring the BV_BKGRDWRITE flag)?");
158 static int bufhashmask;
159 static int bufhashshift;
160 static LIST_HEAD(bufhashhdr, buf) *bufhashtbl, invalhash;
161 struct bqueues bufqueues[BUFFER_QUEUES] = { { 0 } };
162 char *buf_wmesg = BUF_WMESG;
164 extern int vm_swap_size;
166 #define VFS_BIO_NEED_ANY 0x01 /* any freeable buffer */
167 #define VFS_BIO_NEED_DIRTYFLUSH 0x02 /* waiting for dirty buffer flush */
168 #define VFS_BIO_NEED_FREE 0x04 /* wait for free bufs, hi hysteresis */
169 #define VFS_BIO_NEED_BUFSPACE 0x08 /* wait for buf space, lo hysteresis */
172 * Buffer hash table code. Note that the logical block scans linearly, which
173 * gives us some L1 cache locality.
178 bufhash(struct vnode *vnp, daddr_t bn)
184 * A variation on the Fibonacci hash that Knuth credits to
185 * R. W. Floyd, see Knuth's _Art of Computer Programming,
186 * Volume 3 / Sorting and Searching_
188 * We reduce the argument to 32 bits before doing the hash to
189 * avoid the need for a slow 64x64 multiply on 32 bit platforms.
191 * sizeof(struct vnode) is 168 on i386, so toss some of the lower
192 * bits of the vnode address to reduce the key range, which
193 * improves the distribution of keys across buckets.
195 * The file system cylinder group blocks are very heavily
196 * used. They are located at invervals of fbg, which is
197 * on the order of 89 to 94 * 2^10, depending on other
198 * filesystem parameters, for a 16k block size. Smaller block
199 * sizes will reduce fpg approximately proportionally. This
200 * will cause the cylinder group index to be hashed using the
201 * lower bits of the hash multiplier, which will not distribute
202 * the keys as uniformly in a classic Fibonacci hash where a
203 * relatively small number of the upper bits of the result
204 * are used. Using 2^16 as a close-enough approximation to
205 * fpg, split the hash multiplier in half, with the upper 16
206 * bits being the inverse of the golden ratio, and the lower
207 * 16 bits being a fraction between 1/3 and 3/7 (closer to
208 * 3/7 in this case), that gives good experimental results.
210 hashkey64 = ((u_int64_t)(uintptr_t)vnp >> 3) + (u_int64_t)bn;
211 hashkey = (((u_int32_t)(hashkey64 + (hashkey64 >> 32)) * 0x9E376DB1u) >>
212 bufhashshift) & bufhashmask;
213 return(&bufhashtbl[hashkey]);
219 * If someone is blocked due to there being too many dirty buffers,
220 * and numdirtybuffers is now reasonable, wake them up.
224 numdirtywakeup(int level)
226 if (numdirtybuffers <= level) {
227 if (needsbuffer & VFS_BIO_NEED_DIRTYFLUSH) {
228 needsbuffer &= ~VFS_BIO_NEED_DIRTYFLUSH;
229 wakeup(&needsbuffer);
237 * Called when buffer space is potentially available for recovery.
238 * getnewbuf() will block on this flag when it is unable to free
239 * sufficient buffer space. Buffer space becomes recoverable when
240 * bp's get placed back in the queues.
247 * If someone is waiting for BUF space, wake them up. Even
248 * though we haven't freed the kva space yet, the waiting
249 * process will be able to now.
251 if (needsbuffer & VFS_BIO_NEED_BUFSPACE) {
252 needsbuffer &= ~VFS_BIO_NEED_BUFSPACE;
253 wakeup(&needsbuffer);
258 * runningbufwakeup() - in-progress I/O accounting.
262 runningbufwakeup(struct buf *bp)
264 if (bp->b_runningbufspace) {
265 runningbufspace -= bp->b_runningbufspace;
266 bp->b_runningbufspace = 0;
267 if (runningbufreq && runningbufspace <= lorunningspace) {
269 wakeup(&runningbufreq);
277 * Called when a buffer has been added to one of the free queues to
278 * account for the buffer and to wakeup anyone waiting for free buffers.
279 * This typically occurs when large amounts of metadata are being handled
280 * by the buffer cache ( else buffer space runs out first, usually ).
288 needsbuffer &= ~VFS_BIO_NEED_ANY;
289 if (numfreebuffers >= hifreebuffers)
290 needsbuffer &= ~VFS_BIO_NEED_FREE;
291 wakeup(&needsbuffer);
296 * waitrunningbufspace()
298 * runningbufspace is a measure of the amount of I/O currently
299 * running. This routine is used in async-write situations to
300 * prevent creating huge backups of pending writes to a device.
301 * Only asynchronous writes are governed by this function.
303 * Reads will adjust runningbufspace, but will not block based on it.
304 * The read load has a side effect of reducing the allowed write load.
306 * This does NOT turn an async write into a sync write. It waits
307 * for earlier writes to complete and generally returns before the
308 * caller's write has reached the device.
311 waitrunningbufspace(void)
313 while (runningbufspace > hirunningspace) {
316 s = splbio(); /* fix race against interrupt/biodone() */
318 tsleep(&runningbufreq, 0, "wdrain", 0);
324 * vfs_buf_test_cache:
326 * Called when a buffer is extended. This function clears the B_CACHE
327 * bit if the newly extended portion of the buffer does not contain
332 vfs_buf_test_cache(struct buf *bp,
333 vm_ooffset_t foff, vm_offset_t off, vm_offset_t size,
336 if (bp->b_flags & B_CACHE) {
337 int base = (foff + off) & PAGE_MASK;
338 if (vm_page_is_valid(m, base, size) == 0)
339 bp->b_flags &= ~B_CACHE;
345 bd_wakeup(int dirtybuflevel)
347 if (bd_request == 0 && numdirtybuffers >= dirtybuflevel) {
354 * bd_speedup - speedup the buffer cache flushing code
365 * Initialize buffer headers and related structures.
369 bufhashinit(caddr_t vaddr)
371 /* first, make a null hash table */
373 for (bufhashmask = 8; bufhashmask < nbuf / 4; bufhashmask <<= 1)
375 bufhashtbl = (void *)vaddr;
376 vaddr = vaddr + sizeof(*bufhashtbl) * bufhashmask;
387 TAILQ_INIT(&bswlist);
388 LIST_INIT(&invalhash);
389 lwkt_token_init(&buftimetoken);
391 for (i = 0; i <= bufhashmask; i++)
392 LIST_INIT(&bufhashtbl[i]);
394 /* next, make a null set of free lists */
395 for (i = 0; i < BUFFER_QUEUES; i++)
396 TAILQ_INIT(&bufqueues[i]);
398 /* finally, initialize each buffer header and stick on empty q */
399 for (i = 0; i < nbuf; i++) {
401 bzero(bp, sizeof *bp);
402 bp->b_flags = B_INVAL; /* we're just an empty header */
404 bp->b_qindex = QUEUE_EMPTY;
406 LIST_INIT(&bp->b_dep);
408 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_EMPTY], bp, b_freelist);
409 LIST_INSERT_HEAD(&invalhash, bp, b_hash);
413 * maxbufspace is the absolute maximum amount of buffer space we are
414 * allowed to reserve in KVM and in real terms. The absolute maximum
415 * is nominally used by buf_daemon. hibufspace is the nominal maximum
416 * used by most other processes. The differential is required to
417 * ensure that buf_daemon is able to run when other processes might
418 * be blocked waiting for buffer space.
420 * maxbufspace is based on BKVASIZE. Allocating buffers larger then
421 * this may result in KVM fragmentation which is not handled optimally
424 maxbufspace = nbuf * BKVASIZE;
425 hibufspace = imax(3 * maxbufspace / 4, maxbufspace - MAXBSIZE * 10);
426 lobufspace = hibufspace - MAXBSIZE;
428 lorunningspace = 512 * 1024;
429 hirunningspace = 1024 * 1024;
432 * Limit the amount of malloc memory since it is wired permanently into
433 * the kernel space. Even though this is accounted for in the buffer
434 * allocation, we don't want the malloced region to grow uncontrolled.
435 * The malloc scheme improves memory utilization significantly on average
436 * (small) directories.
438 maxbufmallocspace = hibufspace / 20;
441 * Reduce the chance of a deadlock occuring by limiting the number
442 * of delayed-write dirty buffers we allow to stack up.
444 hidirtybuffers = nbuf / 4 + 20;
447 * To support extreme low-memory systems, make sure hidirtybuffers cannot
448 * eat up all available buffer space. This occurs when our minimum cannot
449 * be met. We try to size hidirtybuffers to 3/4 our buffer space assuming
450 * BKVASIZE'd (8K) buffers.
452 while (hidirtybuffers * BKVASIZE > 3 * hibufspace / 4) {
453 hidirtybuffers >>= 1;
455 lodirtybuffers = hidirtybuffers / 2;
458 * Try to keep the number of free buffers in the specified range,
459 * and give special processes (e.g. like buf_daemon) access to an
462 lofreebuffers = nbuf / 18 + 5;
463 hifreebuffers = 2 * lofreebuffers;
464 numfreebuffers = nbuf;
467 * Maximum number of async ops initiated per buf_daemon loop. This is
468 * somewhat of a hack at the moment, we really need to limit ourselves
469 * based on the number of bytes of I/O in-transit that were initiated
473 bogus_offset = kmem_alloc_pageable(kernel_map, PAGE_SIZE);
474 bogus_page = vm_page_alloc(kernel_object,
475 ((bogus_offset - VM_MIN_KERNEL_ADDRESS) >> PAGE_SHIFT),
477 vmstats.v_wire_count++;
482 * bfreekva() - free the kva allocation for a buffer.
484 * Must be called at splbio() or higher as this is the only locking for
487 * Since this call frees up buffer space, we call bufspacewakeup().
490 bfreekva(struct buf * bp)
496 count = vm_map_entry_reserve(MAP_RESERVE_COUNT);
497 vm_map_lock(buffer_map);
498 bufspace -= bp->b_kvasize;
499 vm_map_delete(buffer_map,
500 (vm_offset_t) bp->b_kvabase,
501 (vm_offset_t) bp->b_kvabase + bp->b_kvasize,
504 vm_map_unlock(buffer_map);
505 vm_map_entry_release(count);
514 * Remove the buffer from the appropriate free list.
517 bremfree(struct buf * bp)
520 int old_qindex = bp->b_qindex;
522 if (bp->b_qindex != QUEUE_NONE) {
523 KASSERT(BUF_REFCNT(bp) == 1, ("bremfree: bp %p not locked",bp));
524 TAILQ_REMOVE(&bufqueues[bp->b_qindex], bp, b_freelist);
525 bp->b_qindex = QUEUE_NONE;
527 if (BUF_REFCNT(bp) <= 1)
528 panic("bremfree: removing a buffer not on a queue");
532 * Fixup numfreebuffers count. If the buffer is invalid or not
533 * delayed-write, and it was on the EMPTY, LRU, or AGE queues,
534 * the buffer was free and we must decrement numfreebuffers.
536 if ((bp->b_flags & B_INVAL) || (bp->b_flags & B_DELWRI) == 0) {
553 * Get a buffer with the specified data. Look in the cache first. We
554 * must clear B_ERROR and B_INVAL prior to initiating I/O. If B_CACHE
555 * is set, the buffer is valid and we do not have to do anything ( see
559 bread(struct vnode * vp, daddr_t blkno, int size, struct buf ** bpp)
563 bp = getblk(vp, blkno, size, 0, 0);
566 /* if not found in cache, do some I/O */
567 if ((bp->b_flags & B_CACHE) == 0) {
568 KASSERT(!(bp->b_flags & B_ASYNC), ("bread: illegal async bp %p", bp));
569 bp->b_flags |= B_READ;
570 bp->b_flags &= ~(B_ERROR | B_INVAL);
571 vfs_busy_pages(bp, 0);
572 VOP_STRATEGY(vp, bp);
573 return (biowait(bp));
579 * Operates like bread, but also starts asynchronous I/O on
580 * read-ahead blocks. We must clear B_ERROR and B_INVAL prior
581 * to initiating I/O . If B_CACHE is set, the buffer is valid
582 * and we do not have to do anything.
585 breadn(struct vnode * vp, daddr_t blkno, int size, daddr_t * rablkno,
586 int *rabsize, int cnt, struct buf ** bpp)
588 struct buf *bp, *rabp;
590 int rv = 0, readwait = 0;
592 *bpp = bp = getblk(vp, blkno, size, 0, 0);
594 /* if not found in cache, do some I/O */
595 if ((bp->b_flags & B_CACHE) == 0) {
596 bp->b_flags |= B_READ;
597 bp->b_flags &= ~(B_ERROR | B_INVAL);
598 vfs_busy_pages(bp, 0);
599 VOP_STRATEGY(vp, bp);
603 for (i = 0; i < cnt; i++, rablkno++, rabsize++) {
604 if (inmem(vp, *rablkno))
606 rabp = getblk(vp, *rablkno, *rabsize, 0, 0);
608 if ((rabp->b_flags & B_CACHE) == 0) {
609 rabp->b_flags |= B_READ | B_ASYNC;
610 rabp->b_flags &= ~(B_ERROR | B_INVAL);
611 vfs_busy_pages(rabp, 0);
613 VOP_STRATEGY(vp, rabp);
626 * Write, release buffer on completion. (Done by iodone
627 * if async). Do not bother writing anything if the buffer
630 * Note that we set B_CACHE here, indicating that buffer is
631 * fully valid and thus cacheable. This is true even of NFS
632 * now so we set it generally. This could be set either here
633 * or in biodone() since the I/O is synchronous. We put it
637 bwrite(struct buf * bp)
642 if (bp->b_flags & B_INVAL) {
647 oldflags = bp->b_flags;
649 if (BUF_REFCNT(bp) == 0)
650 panic("bwrite: buffer is not busy???");
653 * If a background write is already in progress, delay
654 * writing this block if it is asynchronous. Otherwise
655 * wait for the background write to complete.
657 if (bp->b_xflags & BX_BKGRDINPROG) {
658 if (bp->b_flags & B_ASYNC) {
663 bp->b_xflags |= BX_BKGRDWAIT;
664 tsleep(&bp->b_xflags, 0, "biord", 0);
665 if (bp->b_xflags & BX_BKGRDINPROG)
666 panic("bwrite: still writing");
669 /* Mark the buffer clean */
673 * If this buffer is marked for background writing and we
674 * do not have to wait for it, make a copy and write the
675 * copy so as to leave this buffer ready for further use.
677 * This optimization eats a lot of memory. If we have a page
678 * or buffer shortfull we can't do it.
681 (bp->b_xflags & BX_BKGRDWRITE) &&
682 (bp->b_flags & B_ASYNC) &&
683 !vm_page_count_severe() &&
684 !buf_dirty_count_severe()) {
685 if (bp->b_flags & B_CALL)
686 panic("bwrite: need chained iodone");
688 /* get a new block */
689 newbp = geteblk(bp->b_bufsize);
691 /* set it to be identical to the old block */
692 memcpy(newbp->b_data, bp->b_data, bp->b_bufsize);
693 bgetvp(bp->b_vp, newbp);
694 newbp->b_lblkno = bp->b_lblkno;
695 newbp->b_blkno = bp->b_blkno;
696 newbp->b_offset = bp->b_offset;
697 newbp->b_iodone = vfs_backgroundwritedone;
698 newbp->b_flags |= B_ASYNC | B_CALL;
699 newbp->b_flags &= ~B_INVAL;
701 /* move over the dependencies */
702 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_movedeps)
703 (*bioops.io_movedeps)(bp, newbp);
706 * Initiate write on the copy, release the original to
707 * the B_LOCKED queue so that it cannot go away until
708 * the background write completes. If not locked it could go
709 * away and then be reconstituted while it was being written.
710 * If the reconstituted buffer were written, we could end up
711 * with two background copies being written at the same time.
713 bp->b_xflags |= BX_BKGRDINPROG;
714 bp->b_flags |= B_LOCKED;
719 bp->b_flags &= ~(B_READ | B_DONE | B_ERROR);
720 bp->b_flags |= B_WRITEINPROG | B_CACHE;
722 bp->b_vp->v_numoutput++;
723 vfs_busy_pages(bp, 1);
726 * Normal bwrites pipeline writes
728 bp->b_runningbufspace = bp->b_bufsize;
729 runningbufspace += bp->b_runningbufspace;
732 if (oldflags & B_ASYNC)
734 VOP_STRATEGY(bp->b_vp, bp);
736 if ((oldflags & B_ASYNC) == 0) {
737 int rtval = biowait(bp);
740 } else if ((oldflags & B_NOWDRAIN) == 0) {
742 * don't allow the async write to saturate the I/O
743 * system. Deadlocks can occur only if a device strategy
744 * routine (like in VN) turns around and issues another
745 * high-level write, in which case B_NOWDRAIN is expected
746 * to be set. Otherwise we will not deadlock here because
747 * we are blocking waiting for I/O that is already in-progress
750 waitrunningbufspace();
757 * Complete a background write started from bwrite.
760 vfs_backgroundwritedone(bp)
766 * Find the original buffer that we are writing.
768 if ((origbp = gbincore(bp->b_vp, bp->b_lblkno)) == NULL)
769 panic("backgroundwritedone: lost buffer");
771 * Process dependencies then return any unfinished ones.
773 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_complete)
774 (*bioops.io_complete)(bp);
775 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_movedeps)
776 (*bioops.io_movedeps)(bp, origbp);
778 * Clear the BX_BKGRDINPROG flag in the original buffer
779 * and awaken it if it is waiting for the write to complete.
780 * If BX_BKGRDINPROG is not set in the original buffer it must
781 * have been released and re-instantiated - which is not legal.
783 KASSERT((origbp->b_xflags & BX_BKGRDINPROG), ("backgroundwritedone: lost buffer2"));
784 origbp->b_xflags &= ~BX_BKGRDINPROG;
785 if (origbp->b_xflags & BX_BKGRDWAIT) {
786 origbp->b_xflags &= ~BX_BKGRDWAIT;
787 wakeup(&origbp->b_xflags);
790 * Clear the B_LOCKED flag and remove it from the locked
791 * queue if it currently resides there.
793 origbp->b_flags &= ~B_LOCKED;
794 if (BUF_LOCK(origbp, LK_EXCLUSIVE | LK_NOWAIT) == 0) {
799 * This buffer is marked B_NOCACHE, so when it is released
800 * by biodone, it will be tossed. We mark it with B_READ
801 * to avoid biodone doing a second vwakeup.
803 bp->b_flags |= B_NOCACHE | B_READ;
804 bp->b_flags &= ~(B_CACHE | B_CALL | B_DONE);
810 * Delayed write. (Buffer is marked dirty). Do not bother writing
811 * anything if the buffer is marked invalid.
813 * Note that since the buffer must be completely valid, we can safely
814 * set B_CACHE. In fact, we have to set B_CACHE here rather then in
815 * biodone() in order to prevent getblk from writing the buffer
819 bdwrite(struct buf * bp)
821 if (BUF_REFCNT(bp) == 0)
822 panic("bdwrite: buffer is not busy");
824 if (bp->b_flags & B_INVAL) {
831 * Set B_CACHE, indicating that the buffer is fully valid. This is
832 * true even of NFS now.
834 bp->b_flags |= B_CACHE;
837 * This bmap keeps the system from needing to do the bmap later,
838 * perhaps when the system is attempting to do a sync. Since it
839 * is likely that the indirect block -- or whatever other datastructure
840 * that the filesystem needs is still in memory now, it is a good
841 * thing to do this. Note also, that if the pageout daemon is
842 * requesting a sync -- there might not be enough memory to do
843 * the bmap then... So, this is important to do.
845 if (bp->b_lblkno == bp->b_blkno) {
846 VOP_BMAP(bp->b_vp, bp->b_lblkno, NULL, &bp->b_blkno, NULL, NULL);
850 * Set the *dirty* buffer range based upon the VM system dirty pages.
855 * We need to do this here to satisfy the vnode_pager and the
856 * pageout daemon, so that it thinks that the pages have been
857 * "cleaned". Note that since the pages are in a delayed write
858 * buffer -- the VFS layer "will" see that the pages get written
859 * out on the next sync, or perhaps the cluster will be completed.
865 * Wakeup the buffer flushing daemon if we have a lot of dirty
866 * buffers (midpoint between our recovery point and our stall
869 bd_wakeup((lodirtybuffers + hidirtybuffers) / 2);
872 * note: we cannot initiate I/O from a bdwrite even if we wanted to,
873 * due to the softdep code.
880 * Turn buffer into delayed write request. We must clear B_READ and
881 * B_RELBUF, and we must set B_DELWRI. We reassign the buffer to
882 * itself to properly update it in the dirty/clean lists. We mark it
883 * B_DONE to ensure that any asynchronization of the buffer properly
884 * clears B_DONE ( else a panic will occur later ).
886 * bdirty() is kinda like bdwrite() - we have to clear B_INVAL which
887 * might have been set pre-getblk(). Unlike bwrite/bdwrite, bdirty()
888 * should only be called if the buffer is known-good.
890 * Since the buffer is not on a queue, we do not update the numfreebuffers
893 * Must be called at splbio().
894 * The buffer must be on QUEUE_NONE.
900 KASSERT(bp->b_qindex == QUEUE_NONE, ("bdirty: buffer %p still on queue %d", bp, bp->b_qindex));
901 bp->b_flags &= ~(B_READ|B_RELBUF);
903 if ((bp->b_flags & B_DELWRI) == 0) {
904 bp->b_flags |= B_DONE | B_DELWRI;
905 reassignbuf(bp, bp->b_vp);
907 bd_wakeup((lodirtybuffers + hidirtybuffers) / 2);
914 * Clear B_DELWRI for buffer.
916 * Since the buffer is not on a queue, we do not update the numfreebuffers
919 * Must be called at splbio().
920 * The buffer must be on QUEUE_NONE.
927 KASSERT(bp->b_qindex == QUEUE_NONE, ("bundirty: buffer %p still on queue %d", bp, bp->b_qindex));
929 if (bp->b_flags & B_DELWRI) {
930 bp->b_flags &= ~B_DELWRI;
931 reassignbuf(bp, bp->b_vp);
933 numdirtywakeup(lodirtybuffers);
936 * Since it is now being written, we can clear its deferred write flag.
938 bp->b_flags &= ~B_DEFERRED;
944 * Asynchronous write. Start output on a buffer, but do not wait for
945 * it to complete. The buffer is released when the output completes.
947 * bwrite() ( or the VOP routine anyway ) is responsible for handling
948 * B_INVAL buffers. Not us.
951 bawrite(struct buf * bp)
953 bp->b_flags |= B_ASYNC;
954 (void) VOP_BWRITE(bp->b_vp, bp);
960 * Ordered write. Start output on a buffer, and flag it so that the
961 * device will write it in the order it was queued. The buffer is
962 * released when the output completes. bwrite() ( or the VOP routine
963 * anyway ) is responsible for handling B_INVAL buffers.
966 bowrite(struct buf * bp)
968 bp->b_flags |= B_ORDERED | B_ASYNC;
969 return (VOP_BWRITE(bp->b_vp, bp));
975 * Called prior to the locking of any vnodes when we are expecting to
976 * write. We do not want to starve the buffer cache with too many
977 * dirty buffers so we block here. By blocking prior to the locking
978 * of any vnodes we attempt to avoid the situation where a locked vnode
979 * prevents the various system daemons from flushing related buffers.
985 if (numdirtybuffers >= hidirtybuffers) {
989 while (numdirtybuffers >= hidirtybuffers) {
991 needsbuffer |= VFS_BIO_NEED_DIRTYFLUSH;
992 tsleep(&needsbuffer, 0, "flswai", 0);
999 * Return true if we have too many dirty buffers.
1002 buf_dirty_count_severe(void)
1004 return(numdirtybuffers >= hidirtybuffers);
1010 * Release a busy buffer and, if requested, free its resources. The
1011 * buffer will be stashed in the appropriate bufqueue[] allowing it
1012 * to be accessed later as a cache entity or reused for other purposes.
1015 brelse(struct buf * bp)
1019 KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)), ("brelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
1023 if (bp->b_flags & B_LOCKED)
1024 bp->b_flags &= ~B_ERROR;
1026 if ((bp->b_flags & (B_READ | B_ERROR | B_INVAL)) == B_ERROR) {
1028 * Failed write, redirty. Must clear B_ERROR to prevent
1029 * pages from being scrapped. If B_INVAL is set then
1030 * this case is not run and the next case is run to
1031 * destroy the buffer. B_INVAL can occur if the buffer
1032 * is outside the range supported by the underlying device.
1034 bp->b_flags &= ~B_ERROR;
1036 } else if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_ERROR | B_FREEBUF)) ||
1037 (bp->b_bufsize <= 0)) {
1039 * Either a failed I/O or we were asked to free or not
1042 bp->b_flags |= B_INVAL;
1043 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_deallocate)
1044 (*bioops.io_deallocate)(bp);
1045 if (bp->b_flags & B_DELWRI) {
1047 numdirtywakeup(lodirtybuffers);
1049 bp->b_flags &= ~(B_DELWRI | B_CACHE | B_FREEBUF);
1050 if ((bp->b_flags & B_VMIO) == 0) {
1059 * We must clear B_RELBUF if B_DELWRI is set. If vfs_vmio_release()
1060 * is called with B_DELWRI set, the underlying pages may wind up
1061 * getting freed causing a previous write (bdwrite()) to get 'lost'
1062 * because pages associated with a B_DELWRI bp are marked clean.
1064 * We still allow the B_INVAL case to call vfs_vmio_release(), even
1065 * if B_DELWRI is set.
1067 * If B_DELWRI is not set we may have to set B_RELBUF if we are low
1068 * on pages to return pages to the VM page queues.
1070 if (bp->b_flags & B_DELWRI)
1071 bp->b_flags &= ~B_RELBUF;
1072 else if (vm_page_count_severe() && !(bp->b_xflags & BX_BKGRDINPROG))
1073 bp->b_flags |= B_RELBUF;
1076 * VMIO buffer rundown. It is not very necessary to keep a VMIO buffer
1077 * constituted, not even NFS buffers now. Two flags effect this. If
1078 * B_INVAL, the struct buf is invalidated but the VM object is kept
1079 * around ( i.e. so it is trivial to reconstitute the buffer later ).
1081 * If B_ERROR or B_NOCACHE is set, pages in the VM object will be
1082 * invalidated. B_ERROR cannot be set for a failed write unless the
1083 * buffer is also B_INVAL because it hits the re-dirtying code above.
1085 * Normally we can do this whether a buffer is B_DELWRI or not. If
1086 * the buffer is an NFS buffer, it is tracking piecemeal writes or
1087 * the commit state and we cannot afford to lose the buffer. If the
1088 * buffer has a background write in progress, we need to keep it
1089 * around to prevent it from being reconstituted and starting a second
1092 if ((bp->b_flags & B_VMIO)
1093 && !(bp->b_vp->v_tag == VT_NFS &&
1094 !vn_isdisk(bp->b_vp, NULL) &&
1095 (bp->b_flags & B_DELWRI))
1108 * Get the base offset and length of the buffer. Note that
1109 * in the VMIO case if the buffer block size is not
1110 * page-aligned then b_data pointer may not be page-aligned.
1111 * But our b_pages[] array *IS* page aligned.
1113 * block sizes less then DEV_BSIZE (usually 512) are not
1114 * supported due to the page granularity bits (m->valid,
1115 * m->dirty, etc...).
1117 * See man buf(9) for more information
1120 resid = bp->b_bufsize;
1121 foff = bp->b_offset;
1123 for (i = 0; i < bp->b_npages; i++) {
1125 vm_page_flag_clear(m, PG_ZERO);
1127 * If we hit a bogus page, fixup *all* of them
1130 if (m == bogus_page) {
1131 VOP_GETVOBJECT(vp, &obj);
1132 poff = OFF_TO_IDX(bp->b_offset);
1134 for (j = i; j < bp->b_npages; j++) {
1137 mtmp = bp->b_pages[j];
1138 if (mtmp == bogus_page) {
1139 mtmp = vm_page_lookup(obj, poff + j);
1141 panic("brelse: page missing\n");
1143 bp->b_pages[j] = mtmp;
1147 if ((bp->b_flags & B_INVAL) == 0) {
1148 pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_pages, bp->b_npages);
1152 if (bp->b_flags & (B_NOCACHE|B_ERROR)) {
1153 int poffset = foff & PAGE_MASK;
1154 int presid = resid > (PAGE_SIZE - poffset) ?
1155 (PAGE_SIZE - poffset) : resid;
1157 KASSERT(presid >= 0, ("brelse: extra page"));
1158 vm_page_set_invalid(m, poffset, presid);
1160 resid -= PAGE_SIZE - (foff & PAGE_MASK);
1161 foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
1164 if (bp->b_flags & (B_INVAL | B_RELBUF))
1165 vfs_vmio_release(bp);
1167 } else if (bp->b_flags & B_VMIO) {
1169 if (bp->b_flags & (B_INVAL | B_RELBUF))
1170 vfs_vmio_release(bp);
1174 if (bp->b_qindex != QUEUE_NONE)
1175 panic("brelse: free buffer onto another queue???");
1176 if (BUF_REFCNT(bp) > 1) {
1177 /* Temporary panic to verify exclusive locking */
1178 /* This panic goes away when we allow shared refs */
1179 panic("brelse: multiple refs");
1180 /* do not release to free list */
1188 /* buffers with no memory */
1189 if (bp->b_bufsize == 0) {
1190 bp->b_flags |= B_INVAL;
1191 bp->b_xflags &= ~BX_BKGRDWRITE;
1192 if (bp->b_xflags & BX_BKGRDINPROG)
1193 panic("losing buffer 1");
1194 if (bp->b_kvasize) {
1195 bp->b_qindex = QUEUE_EMPTYKVA;
1197 bp->b_qindex = QUEUE_EMPTY;
1199 TAILQ_INSERT_HEAD(&bufqueues[bp->b_qindex], bp, b_freelist);
1200 LIST_REMOVE(bp, b_hash);
1201 LIST_INSERT_HEAD(&invalhash, bp, b_hash);
1203 /* buffers with junk contents */
1204 } else if (bp->b_flags & (B_ERROR | B_INVAL | B_NOCACHE | B_RELBUF)) {
1205 bp->b_flags |= B_INVAL;
1206 bp->b_xflags &= ~BX_BKGRDWRITE;
1207 if (bp->b_xflags & BX_BKGRDINPROG)
1208 panic("losing buffer 2");
1209 bp->b_qindex = QUEUE_CLEAN;
1210 TAILQ_INSERT_HEAD(&bufqueues[QUEUE_CLEAN], bp, b_freelist);
1211 LIST_REMOVE(bp, b_hash);
1212 LIST_INSERT_HEAD(&invalhash, bp, b_hash);
1215 /* buffers that are locked */
1216 } else if (bp->b_flags & B_LOCKED) {
1217 bp->b_qindex = QUEUE_LOCKED;
1218 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_LOCKED], bp, b_freelist);
1220 /* remaining buffers */
1222 switch(bp->b_flags & (B_DELWRI|B_AGE)) {
1223 case B_DELWRI | B_AGE:
1224 bp->b_qindex = QUEUE_DIRTY;
1225 TAILQ_INSERT_HEAD(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
1228 bp->b_qindex = QUEUE_DIRTY;
1229 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
1232 bp->b_qindex = QUEUE_CLEAN;
1233 TAILQ_INSERT_HEAD(&bufqueues[QUEUE_CLEAN], bp, b_freelist);
1236 bp->b_qindex = QUEUE_CLEAN;
1237 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_CLEAN], bp, b_freelist);
1243 * If B_INVAL, clear B_DELWRI. We've already placed the buffer
1244 * on the correct queue.
1246 if ((bp->b_flags & (B_INVAL|B_DELWRI)) == (B_INVAL|B_DELWRI))
1250 * Fixup numfreebuffers count. The bp is on an appropriate queue
1251 * unless locked. We then bump numfreebuffers if it is not B_DELWRI.
1252 * We've already handled the B_INVAL case ( B_DELWRI will be clear
1253 * if B_INVAL is set ).
1256 if ((bp->b_flags & B_LOCKED) == 0 && !(bp->b_flags & B_DELWRI))
1260 * Something we can maybe free or reuse
1262 if (bp->b_bufsize || bp->b_kvasize)
1267 bp->b_flags &= ~(B_ORDERED | B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF |
1268 B_DIRECT | B_NOWDRAIN);
1273 * Release a buffer back to the appropriate queue but do not try to free
1274 * it. The buffer is expected to be used again soon.
1276 * bqrelse() is used by bdwrite() to requeue a delayed write, and used by
1277 * biodone() to requeue an async I/O on completion. It is also used when
1278 * known good buffers need to be requeued but we think we may need the data
1281 * XXX we should be able to leave the B_RELBUF hint set on completion.
1284 bqrelse(struct buf * bp)
1290 KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)), ("bqrelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
1292 if (bp->b_qindex != QUEUE_NONE)
1293 panic("bqrelse: free buffer onto another queue???");
1294 if (BUF_REFCNT(bp) > 1) {
1295 /* do not release to free list */
1296 panic("bqrelse: multiple refs");
1301 if (bp->b_flags & B_LOCKED) {
1302 bp->b_flags &= ~B_ERROR;
1303 bp->b_qindex = QUEUE_LOCKED;
1304 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_LOCKED], bp, b_freelist);
1305 /* buffers with stale but valid contents */
1306 } else if (bp->b_flags & B_DELWRI) {
1307 bp->b_qindex = QUEUE_DIRTY;
1308 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
1309 } else if (vm_page_count_severe()) {
1311 * We are too low on memory, we have to try to free the
1312 * buffer (most importantly: the wired pages making up its
1313 * backing store) *now*.
1319 bp->b_qindex = QUEUE_CLEAN;
1320 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_CLEAN], bp, b_freelist);
1323 if ((bp->b_flags & B_LOCKED) == 0 &&
1324 ((bp->b_flags & B_INVAL) || !(bp->b_flags & B_DELWRI))) {
1329 * Something we can maybe free or reuse.
1331 if (bp->b_bufsize && !(bp->b_flags & B_DELWRI))
1336 bp->b_flags &= ~(B_ORDERED | B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF);
1341 vfs_vmio_release(bp)
1348 for (i = 0; i < bp->b_npages; i++) {
1350 bp->b_pages[i] = NULL;
1352 * In order to keep page LRU ordering consistent, put
1353 * everything on the inactive queue.
1355 vm_page_unwire(m, 0);
1357 * We don't mess with busy pages, it is
1358 * the responsibility of the process that
1359 * busied the pages to deal with them.
1361 if ((m->flags & PG_BUSY) || (m->busy != 0))
1364 if (m->wire_count == 0) {
1365 vm_page_flag_clear(m, PG_ZERO);
1367 * Might as well free the page if we can and it has
1368 * no valid data. We also free the page if the
1369 * buffer was used for direct I/O.
1371 if ((bp->b_flags & B_ASYNC) == 0 && !m->valid && m->hold_count == 0) {
1373 vm_page_protect(m, VM_PROT_NONE);
1375 } else if (bp->b_flags & B_DIRECT) {
1376 vm_page_try_to_free(m);
1377 } else if (vm_page_count_severe()) {
1378 vm_page_try_to_cache(m);
1383 pmap_qremove(trunc_page((vm_offset_t) bp->b_data), bp->b_npages);
1384 if (bp->b_bufsize) {
1389 bp->b_flags &= ~B_VMIO;
1395 * Check to see if a block is currently memory resident.
1398 gbincore(struct vnode * vp, daddr_t blkno)
1401 struct bufhashhdr *bh;
1403 bh = bufhash(vp, blkno);
1405 /* Search hash chain */
1406 LIST_FOREACH(bp, bh, b_hash) {
1408 if (bp->b_vp == vp && bp->b_lblkno == blkno &&
1409 (bp->b_flags & B_INVAL) == 0) {
1419 * Implement clustered async writes for clearing out B_DELWRI buffers.
1420 * This is much better then the old way of writing only one buffer at
1421 * a time. Note that we may not be presented with the buffers in the
1422 * correct order, so we search for the cluster in both directions.
1425 vfs_bio_awrite(struct buf * bp)
1429 daddr_t lblkno = bp->b_lblkno;
1430 struct vnode *vp = bp->b_vp;
1440 * right now we support clustered writing only to regular files. If
1441 * we find a clusterable block we could be in the middle of a cluster
1442 * rather then at the beginning.
1444 if ((vp->v_type == VREG) &&
1445 (vp->v_mount != 0) && /* Only on nodes that have the size info */
1446 (bp->b_flags & (B_CLUSTEROK | B_INVAL)) == B_CLUSTEROK) {
1448 size = vp->v_mount->mnt_stat.f_iosize;
1449 maxcl = MAXPHYS / size;
1451 for (i = 1; i < maxcl; i++) {
1452 if ((bpa = gbincore(vp, lblkno + i)) &&
1453 BUF_REFCNT(bpa) == 0 &&
1454 ((bpa->b_flags & (B_DELWRI | B_CLUSTEROK | B_INVAL)) ==
1455 (B_DELWRI | B_CLUSTEROK)) &&
1456 (bpa->b_bufsize == size)) {
1457 if ((bpa->b_blkno == bpa->b_lblkno) ||
1459 bp->b_blkno + ((i * size) >> DEV_BSHIFT)))
1465 for (j = 1; i + j <= maxcl && j <= lblkno; j++) {
1466 if ((bpa = gbincore(vp, lblkno - j)) &&
1467 BUF_REFCNT(bpa) == 0 &&
1468 ((bpa->b_flags & (B_DELWRI | B_CLUSTEROK | B_INVAL)) ==
1469 (B_DELWRI | B_CLUSTEROK)) &&
1470 (bpa->b_bufsize == size)) {
1471 if ((bpa->b_blkno == bpa->b_lblkno) ||
1473 bp->b_blkno - ((j * size) >> DEV_BSHIFT)))
1482 * this is a possible cluster write
1485 nwritten = cluster_wbuild(vp, size, lblkno - j, ncl);
1491 BUF_LOCK(bp, LK_EXCLUSIVE);
1493 bp->b_flags |= B_ASYNC;
1497 * default (old) behavior, writing out only one block
1499 * XXX returns b_bufsize instead of b_bcount for nwritten?
1501 nwritten = bp->b_bufsize;
1502 (void) VOP_BWRITE(bp->b_vp, bp);
1510 * Find and initialize a new buffer header, freeing up existing buffers
1511 * in the bufqueues as necessary. The new buffer is returned locked.
1513 * Important: B_INVAL is not set. If the caller wishes to throw the
1514 * buffer away, the caller must set B_INVAL prior to calling brelse().
1517 * We have insufficient buffer headers
1518 * We have insufficient buffer space
1519 * buffer_map is too fragmented ( space reservation fails )
1520 * If we have to flush dirty buffers ( but we try to avoid this )
1522 * To avoid VFS layer recursion we do not flush dirty buffers ourselves.
1523 * Instead we ask the buf daemon to do it for us. We attempt to
1524 * avoid piecemeal wakeups of the pageout daemon.
1528 getnewbuf(int slpflag, int slptimeo, int size, int maxsize)
1534 static int flushingbufs;
1537 * We can't afford to block since we might be holding a vnode lock,
1538 * which may prevent system daemons from running. We deal with
1539 * low-memory situations by proactively returning memory and running
1540 * async I/O rather then sync I/O.
1544 --getnewbufrestarts;
1546 ++getnewbufrestarts;
1549 * Setup for scan. If we do not have enough free buffers,
1550 * we setup a degenerate case that immediately fails. Note
1551 * that if we are specially marked process, we are allowed to
1552 * dip into our reserves.
1554 * The scanning sequence is nominally: EMPTY->EMPTYKVA->CLEAN
1556 * We start with EMPTYKVA. If the list is empty we backup to EMPTY.
1557 * However, there are a number of cases (defragging, reusing, ...)
1558 * where we cannot backup.
1560 nqindex = QUEUE_EMPTYKVA;
1561 nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA]);
1565 * If no EMPTYKVA buffers and we are either
1566 * defragging or reusing, locate a CLEAN buffer
1567 * to free or reuse. If bufspace useage is low
1568 * skip this step so we can allocate a new buffer.
1570 if (defrag || bufspace >= lobufspace) {
1571 nqindex = QUEUE_CLEAN;
1572 nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN]);
1576 * If we could not find or were not allowed to reuse a
1577 * CLEAN buffer, check to see if it is ok to use an EMPTY
1578 * buffer. We can only use an EMPTY buffer if allocating
1579 * its KVA would not otherwise run us out of buffer space.
1581 if (nbp == NULL && defrag == 0 &&
1582 bufspace + maxsize < hibufspace) {
1583 nqindex = QUEUE_EMPTY;
1584 nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTY]);
1589 * Run scan, possibly freeing data and/or kva mappings on the fly
1593 while ((bp = nbp) != NULL) {
1594 int qindex = nqindex;
1597 * Calculate next bp ( we can only use it if we do not block
1598 * or do other fancy things ).
1600 if ((nbp = TAILQ_NEXT(bp, b_freelist)) == NULL) {
1603 nqindex = QUEUE_EMPTYKVA;
1604 if ((nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA])))
1607 case QUEUE_EMPTYKVA:
1608 nqindex = QUEUE_CLEAN;
1609 if ((nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN])))
1623 KASSERT(bp->b_qindex == qindex, ("getnewbuf: inconsistant queue %d bp %p", qindex, bp));
1626 * Note: we no longer distinguish between VMIO and non-VMIO
1630 KASSERT((bp->b_flags & B_DELWRI) == 0, ("delwri buffer %p found in queue %d", bp, qindex));
1633 * If we are defragging then we need a buffer with
1634 * b_kvasize != 0. XXX this situation should no longer
1635 * occur, if defrag is non-zero the buffer's b_kvasize
1636 * should also be non-zero at this point. XXX
1638 if (defrag && bp->b_kvasize == 0) {
1639 printf("Warning: defrag empty buffer %p\n", bp);
1644 * Start freeing the bp. This is somewhat involved. nbp
1645 * remains valid only for QUEUE_EMPTY[KVA] bp's.
1648 if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT) != 0)
1649 panic("getnewbuf: locked buf");
1652 if (qindex == QUEUE_CLEAN) {
1653 if (bp->b_flags & B_VMIO) {
1654 bp->b_flags &= ~B_ASYNC;
1655 vfs_vmio_release(bp);
1662 * NOTE: nbp is now entirely invalid. We can only restart
1663 * the scan from this point on.
1665 * Get the rest of the buffer freed up. b_kva* is still
1666 * valid after this operation.
1669 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_deallocate)
1670 (*bioops.io_deallocate)(bp);
1671 if (bp->b_xflags & BX_BKGRDINPROG)
1672 panic("losing buffer 3");
1673 LIST_REMOVE(bp, b_hash);
1674 LIST_INSERT_HEAD(&invalhash, bp, b_hash);
1683 bp->b_blkno = bp->b_lblkno = 0;
1684 bp->b_offset = NOOFFSET;
1690 bp->b_dirtyoff = bp->b_dirtyend = 0;
1692 LIST_INIT(&bp->b_dep);
1695 * If we are defragging then free the buffer.
1698 bp->b_flags |= B_INVAL;
1706 * If we are overcomitted then recover the buffer and its
1707 * KVM space. This occurs in rare situations when multiple
1708 * processes are blocked in getnewbuf() or allocbuf().
1710 if (bufspace >= hibufspace)
1712 if (flushingbufs && bp->b_kvasize != 0) {
1713 bp->b_flags |= B_INVAL;
1718 if (bufspace < lobufspace)
1724 * If we exhausted our list, sleep as appropriate. We may have to
1725 * wakeup various daemons and write out some dirty buffers.
1727 * Generally we are sleeping due to insufficient buffer space.
1735 flags = VFS_BIO_NEED_BUFSPACE;
1737 } else if (bufspace >= hibufspace) {
1739 flags = VFS_BIO_NEED_BUFSPACE;
1742 flags = VFS_BIO_NEED_ANY;
1745 bd_speedup(); /* heeeelp */
1747 needsbuffer |= flags;
1748 while (needsbuffer & flags) {
1749 if (tsleep(&needsbuffer, slpflag, waitmsg, slptimeo))
1754 * We finally have a valid bp. We aren't quite out of the
1755 * woods, we still have to reserve kva space. In order
1756 * to keep fragmentation sane we only allocate kva in
1759 maxsize = (maxsize + BKVAMASK) & ~BKVAMASK;
1761 if (maxsize != bp->b_kvasize) {
1762 vm_offset_t addr = 0;
1767 count = vm_map_entry_reserve(MAP_RESERVE_COUNT);
1768 vm_map_lock(buffer_map);
1770 if (vm_map_findspace(buffer_map,
1771 vm_map_min(buffer_map), maxsize,
1774 * Uh oh. Buffer map is to fragmented. We
1775 * must defragment the map.
1777 vm_map_unlock(buffer_map);
1778 vm_map_entry_release(count);
1781 bp->b_flags |= B_INVAL;
1786 vm_map_insert(buffer_map, &count,
1788 addr, addr + maxsize,
1789 VM_PROT_ALL, VM_PROT_ALL, MAP_NOFAULT);
1791 bp->b_kvabase = (caddr_t) addr;
1792 bp->b_kvasize = maxsize;
1793 bufspace += bp->b_kvasize;
1796 vm_map_unlock(buffer_map);
1797 vm_map_entry_release(count);
1799 bp->b_data = bp->b_kvabase;
1807 * buffer flushing daemon. Buffers are normally flushed by the
1808 * update daemon but if it cannot keep up this process starts to
1809 * take the load in an attempt to prevent getnewbuf() from blocking.
1812 static struct thread *bufdaemonthread;
1814 static struct kproc_desc buf_kp = {
1819 SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp)
1827 * This process needs to be suspended prior to shutdown sync.
1829 EVENTHANDLER_REGISTER(shutdown_pre_sync, shutdown_kproc,
1830 bufdaemonthread, SHUTDOWN_PRI_LAST);
1833 * This process is allowed to take the buffer cache to the limit
1838 kproc_suspend_loop();
1841 * Do the flush. Limit the amount of in-transit I/O we
1842 * allow to build up, otherwise we would completely saturate
1843 * the I/O system. Wakeup any waiting processes before we
1844 * normally would so they can run in parallel with our drain.
1846 while (numdirtybuffers > lodirtybuffers) {
1847 if (flushbufqueues() == 0)
1849 waitrunningbufspace();
1850 numdirtywakeup((lodirtybuffers + hidirtybuffers) / 2);
1854 * Only clear bd_request if we have reached our low water
1855 * mark. The buf_daemon normally waits 5 seconds and
1856 * then incrementally flushes any dirty buffers that have
1857 * built up, within reason.
1859 * If we were unable to hit our low water mark and couldn't
1860 * find any flushable buffers, we sleep half a second.
1861 * Otherwise we loop immediately.
1863 if (numdirtybuffers <= lodirtybuffers) {
1865 * We reached our low water mark, reset the
1866 * request and sleep until we are needed again.
1867 * The sleep is just so the suspend code works.
1870 tsleep(&bd_request, 0, "psleep", hz);
1873 * We couldn't find any flushable dirty buffers but
1874 * still have too many dirty buffers, we
1875 * have to sleep and try again. (rare)
1877 tsleep(&bd_request, 0, "qsleep", hz / 2);
1885 * Try to flush a buffer in the dirty queue. We must be careful to
1886 * free up B_INVAL buffers instead of write them, which NFS is
1887 * particularly sensitive to.
1891 flushbufqueues(void)
1896 bp = TAILQ_FIRST(&bufqueues[QUEUE_DIRTY]);
1899 KASSERT((bp->b_flags & B_DELWRI), ("unexpected clean buffer %p", bp));
1900 if ((bp->b_flags & B_DELWRI) != 0 &&
1901 (bp->b_xflags & BX_BKGRDINPROG) == 0) {
1902 if (bp->b_flags & B_INVAL) {
1903 if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT) != 0)
1904 panic("flushbufqueues: locked buf");
1910 if (LIST_FIRST(&bp->b_dep) != NULL &&
1911 bioops.io_countdeps &&
1912 (bp->b_flags & B_DEFERRED) == 0 &&
1913 (*bioops.io_countdeps)(bp, 0)) {
1914 TAILQ_REMOVE(&bufqueues[QUEUE_DIRTY],
1916 TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY],
1918 bp->b_flags |= B_DEFERRED;
1919 bp = TAILQ_FIRST(&bufqueues[QUEUE_DIRTY]);
1926 bp = TAILQ_NEXT(bp, b_freelist);
1932 * Check to see if a block is currently memory resident.
1935 incore(struct vnode * vp, daddr_t blkno)
1940 bp = gbincore(vp, blkno);
1946 * Returns true if no I/O is needed to access the
1947 * associated VM object. This is like incore except
1948 * it also hunts around in the VM system for the data.
1952 inmem(struct vnode * vp, daddr_t blkno)
1955 vm_offset_t toff, tinc, size;
1959 if (incore(vp, blkno))
1961 if (vp->v_mount == NULL)
1963 if (VOP_GETVOBJECT(vp, &obj) != 0 || (vp->v_flag & VOBJBUF) == 0)
1967 if (size > vp->v_mount->mnt_stat.f_iosize)
1968 size = vp->v_mount->mnt_stat.f_iosize;
1969 off = (vm_ooffset_t)blkno * (vm_ooffset_t)vp->v_mount->mnt_stat.f_iosize;
1971 for (toff = 0; toff < vp->v_mount->mnt_stat.f_iosize; toff += tinc) {
1972 m = vm_page_lookup(obj, OFF_TO_IDX(off + toff));
1976 if (tinc > PAGE_SIZE - ((toff + off) & PAGE_MASK))
1977 tinc = PAGE_SIZE - ((toff + off) & PAGE_MASK);
1978 if (vm_page_is_valid(m,
1979 (vm_offset_t) ((toff + off) & PAGE_MASK), tinc) == 0)
1988 * Sets the dirty range for a buffer based on the status of the dirty
1989 * bits in the pages comprising the buffer.
1991 * The range is limited to the size of the buffer.
1993 * This routine is primarily used by NFS, but is generalized for the
1997 vfs_setdirty(struct buf *bp)
2003 * Degenerate case - empty buffer
2006 if (bp->b_bufsize == 0)
2010 * We qualify the scan for modified pages on whether the
2011 * object has been flushed yet. The OBJ_WRITEABLE flag
2012 * is not cleared simply by protecting pages off.
2015 if ((bp->b_flags & B_VMIO) == 0)
2018 object = bp->b_pages[0]->object;
2020 if ((object->flags & OBJ_WRITEABLE) && !(object->flags & OBJ_MIGHTBEDIRTY))
2021 printf("Warning: object %p writeable but not mightbedirty\n", object);
2022 if (!(object->flags & OBJ_WRITEABLE) && (object->flags & OBJ_MIGHTBEDIRTY))
2023 printf("Warning: object %p mightbedirty but not writeable\n", object);
2025 if (object->flags & (OBJ_MIGHTBEDIRTY|OBJ_CLEANING)) {
2026 vm_offset_t boffset;
2027 vm_offset_t eoffset;
2030 * test the pages to see if they have been modified directly
2031 * by users through the VM system.
2033 for (i = 0; i < bp->b_npages; i++) {
2034 vm_page_flag_clear(bp->b_pages[i], PG_ZERO);
2035 vm_page_test_dirty(bp->b_pages[i]);
2039 * Calculate the encompassing dirty range, boffset and eoffset,
2040 * (eoffset - boffset) bytes.
2043 for (i = 0; i < bp->b_npages; i++) {
2044 if (bp->b_pages[i]->dirty)
2047 boffset = (i << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
2049 for (i = bp->b_npages - 1; i >= 0; --i) {
2050 if (bp->b_pages[i]->dirty) {
2054 eoffset = ((i + 1) << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
2057 * Fit it to the buffer.
2060 if (eoffset > bp->b_bcount)
2061 eoffset = bp->b_bcount;
2064 * If we have a good dirty range, merge with the existing
2068 if (boffset < eoffset) {
2069 if (bp->b_dirtyoff > boffset)
2070 bp->b_dirtyoff = boffset;
2071 if (bp->b_dirtyend < eoffset)
2072 bp->b_dirtyend = eoffset;
2080 * Get a block given a specified block and offset into a file/device.
2081 * The buffers B_DONE bit will be cleared on return, making it almost
2082 * ready for an I/O initiation. B_INVAL may or may not be set on
2083 * return. The caller should clear B_INVAL prior to initiating a
2086 * For a non-VMIO buffer, B_CACHE is set to the opposite of B_INVAL for
2087 * an existing buffer.
2089 * For a VMIO buffer, B_CACHE is modified according to the backing VM.
2090 * If getblk()ing a previously 0-sized invalid buffer, B_CACHE is set
2091 * and then cleared based on the backing VM. If the previous buffer is
2092 * non-0-sized but invalid, B_CACHE will be cleared.
2094 * If getblk() must create a new buffer, the new buffer is returned with
2095 * both B_INVAL and B_CACHE clear unless it is a VMIO buffer, in which
2096 * case it is returned with B_INVAL clear and B_CACHE set based on the
2099 * getblk() also forces a VOP_BWRITE() for any B_DELWRI buffer whos
2100 * B_CACHE bit is clear.
2102 * What this means, basically, is that the caller should use B_CACHE to
2103 * determine whether the buffer is fully valid or not and should clear
2104 * B_INVAL prior to issuing a read. If the caller intends to validate
2105 * the buffer by loading its data area with something, the caller needs
2106 * to clear B_INVAL. If the caller does this without issuing an I/O,
2107 * the caller should set B_CACHE ( as an optimization ), else the caller
2108 * should issue the I/O and biodone() will set B_CACHE if the I/O was
2109 * a write attempt or if it was a successfull read. If the caller
2110 * intends to issue a READ, the caller must clear B_INVAL and B_ERROR
2111 * prior to issuing the READ. biodone() will *not* clear B_INVAL.
2114 getblk(struct vnode * vp, daddr_t blkno, int size, int slpflag, int slptimeo)
2118 struct bufhashhdr *bh;
2120 if (size > MAXBSIZE)
2121 panic("getblk: size(%d) > MAXBSIZE(%d)\n", size, MAXBSIZE);
2126 * Block if we are low on buffers. Certain processes are allowed
2127 * to completely exhaust the buffer cache.
2129 * If this check ever becomes a bottleneck it may be better to
2130 * move it into the else, when gbincore() fails. At the moment
2131 * it isn't a problem.
2133 * XXX remove, we cannot afford to block anywhere if holding a vnode
2134 * lock in low-memory situation, so take it to the max.
2136 if (numfreebuffers == 0) {
2139 needsbuffer |= VFS_BIO_NEED_ANY;
2140 tsleep(&needsbuffer, slpflag, "newbuf", slptimeo);
2143 if ((bp = gbincore(vp, blkno))) {
2145 * Buffer is in-core. If the buffer is not busy, it must
2149 if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT)) {
2150 if (BUF_TIMELOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL,
2151 "getblk", slpflag, slptimeo) == ENOLCK)
2154 return (struct buf *) NULL;
2158 * The buffer is locked. B_CACHE is cleared if the buffer is
2159 * invalid. Ohterwise, for a non-VMIO buffer, B_CACHE is set
2160 * and for a VMIO buffer B_CACHE is adjusted according to the
2163 if (bp->b_flags & B_INVAL)
2164 bp->b_flags &= ~B_CACHE;
2165 else if ((bp->b_flags & (B_VMIO | B_INVAL)) == 0)
2166 bp->b_flags |= B_CACHE;
2170 * check for size inconsistancies for non-VMIO case.
2173 if (bp->b_bcount != size) {
2174 if ((bp->b_flags & B_VMIO) == 0 ||
2175 (size > bp->b_kvasize)) {
2176 if (bp->b_flags & B_DELWRI) {
2177 bp->b_flags |= B_NOCACHE;
2178 VOP_BWRITE(bp->b_vp, bp);
2180 if ((bp->b_flags & B_VMIO) &&
2181 (LIST_FIRST(&bp->b_dep) == NULL)) {
2182 bp->b_flags |= B_RELBUF;
2185 bp->b_flags |= B_NOCACHE;
2186 VOP_BWRITE(bp->b_vp, bp);
2194 * If the size is inconsistant in the VMIO case, we can resize
2195 * the buffer. This might lead to B_CACHE getting set or
2196 * cleared. If the size has not changed, B_CACHE remains
2197 * unchanged from its previous state.
2200 if (bp->b_bcount != size)
2203 KASSERT(bp->b_offset != NOOFFSET,
2204 ("getblk: no buffer offset"));
2207 * A buffer with B_DELWRI set and B_CACHE clear must
2208 * be committed before we can return the buffer in
2209 * order to prevent the caller from issuing a read
2210 * ( due to B_CACHE not being set ) and overwriting
2213 * Most callers, including NFS and FFS, need this to
2214 * operate properly either because they assume they
2215 * can issue a read if B_CACHE is not set, or because
2216 * ( for example ) an uncached B_DELWRI might loop due
2217 * to softupdates re-dirtying the buffer. In the latter
2218 * case, B_CACHE is set after the first write completes,
2219 * preventing further loops.
2221 * NOTE! b*write() sets B_CACHE. If we cleared B_CACHE
2222 * above while extending the buffer, we cannot allow the
2223 * buffer to remain with B_CACHE set after the write
2224 * completes or it will represent a corrupt state. To
2225 * deal with this we set B_NOCACHE to scrap the buffer
2228 * We might be able to do something fancy, like setting
2229 * B_CACHE in bwrite() except if B_DELWRI is already set,
2230 * so the below call doesn't set B_CACHE, but that gets real
2231 * confusing. This is much easier.
2234 if ((bp->b_flags & (B_CACHE|B_DELWRI)) == B_DELWRI) {
2235 bp->b_flags |= B_NOCACHE;
2236 VOP_BWRITE(bp->b_vp, bp);
2241 bp->b_flags &= ~B_DONE;
2244 * Buffer is not in-core, create new buffer. The buffer
2245 * returned by getnewbuf() is locked. Note that the returned
2246 * buffer is also considered valid (not marked B_INVAL).
2248 int bsize, maxsize, vmio;
2251 if (vn_isdisk(vp, NULL))
2253 else if (vp->v_mountedhere)
2254 bsize = vp->v_mountedhere->mnt_stat.f_iosize;
2255 else if (vp->v_mount)
2256 bsize = vp->v_mount->mnt_stat.f_iosize;
2260 offset = (off_t)blkno * bsize;
2261 vmio = (VOP_GETVOBJECT(vp, NULL) == 0) && (vp->v_flag & VOBJBUF);
2262 maxsize = vmio ? size + (offset & PAGE_MASK) : size;
2263 maxsize = imax(maxsize, bsize);
2265 if ((bp = getnewbuf(slpflag, slptimeo, size, maxsize)) == NULL) {
2266 if (slpflag || slptimeo) {
2274 * This code is used to make sure that a buffer is not
2275 * created while the getnewbuf routine is blocked.
2276 * This can be a problem whether the vnode is locked or not.
2277 * If the buffer is created out from under us, we have to
2278 * throw away the one we just created. There is now window
2279 * race because we are safely running at splbio() from the
2280 * point of the duplicate buffer creation through to here,
2281 * and we've locked the buffer.
2283 if (gbincore(vp, blkno)) {
2284 bp->b_flags |= B_INVAL;
2290 * Insert the buffer into the hash, so that it can
2291 * be found by incore.
2293 bp->b_blkno = bp->b_lblkno = blkno;
2294 bp->b_offset = offset;
2297 LIST_REMOVE(bp, b_hash);
2298 bh = bufhash(vp, blkno);
2299 LIST_INSERT_HEAD(bh, bp, b_hash);
2302 * set B_VMIO bit. allocbuf() the buffer bigger. Since the
2303 * buffer size starts out as 0, B_CACHE will be set by
2304 * allocbuf() for the VMIO case prior to it testing the
2305 * backing store for validity.
2309 bp->b_flags |= B_VMIO;
2310 #if defined(VFS_BIO_DEBUG)
2311 if (vn_canvmio(vp) != TRUE)
2312 printf("getblk: vmioing file type %d???\n", vp->v_type);
2315 bp->b_flags &= ~B_VMIO;
2321 bp->b_flags &= ~B_DONE;
2327 * Get an empty, disassociated buffer of given size. The buffer is initially
2337 maxsize = (size + BKVAMASK) & ~BKVAMASK;
2340 while ((bp = getnewbuf(0, 0, size, maxsize)) == 0);
2343 bp->b_flags |= B_INVAL; /* b_dep cleared by getnewbuf() */
2349 * This code constitutes the buffer memory from either anonymous system
2350 * memory (in the case of non-VMIO operations) or from an associated
2351 * VM object (in the case of VMIO operations). This code is able to
2352 * resize a buffer up or down.
2354 * Note that this code is tricky, and has many complications to resolve
2355 * deadlock or inconsistant data situations. Tread lightly!!!
2356 * There are B_CACHE and B_DELWRI interactions that must be dealt with by
2357 * the caller. Calling this code willy nilly can result in the loss of data.
2359 * allocbuf() only adjusts B_CACHE for VMIO buffers. getblk() deals with
2360 * B_CACHE for the non-VMIO case.
2364 allocbuf(struct buf *bp, int size)
2366 int newbsize, mbsize;
2369 if (BUF_REFCNT(bp) == 0)
2370 panic("allocbuf: buffer not busy");
2372 if (bp->b_kvasize < size)
2373 panic("allocbuf: buffer too small");
2375 if ((bp->b_flags & B_VMIO) == 0) {
2379 * Just get anonymous memory from the kernel. Don't
2380 * mess with B_CACHE.
2382 mbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
2383 #if !defined(NO_B_MALLOC)
2384 if (bp->b_flags & B_MALLOC)
2388 newbsize = round_page(size);
2390 if (newbsize < bp->b_bufsize) {
2391 #if !defined(NO_B_MALLOC)
2393 * malloced buffers are not shrunk
2395 if (bp->b_flags & B_MALLOC) {
2397 bp->b_bcount = size;
2399 free(bp->b_data, M_BIOBUF);
2400 if (bp->b_bufsize) {
2401 bufmallocspace -= bp->b_bufsize;
2405 bp->b_data = bp->b_kvabase;
2407 bp->b_flags &= ~B_MALLOC;
2414 (vm_offset_t) bp->b_data + newbsize,
2415 (vm_offset_t) bp->b_data + bp->b_bufsize);
2416 } else if (newbsize > bp->b_bufsize) {
2417 #if !defined(NO_B_MALLOC)
2419 * We only use malloced memory on the first allocation.
2420 * and revert to page-allocated memory when the buffer
2423 if ( (bufmallocspace < maxbufmallocspace) &&
2424 (bp->b_bufsize == 0) &&
2425 (mbsize <= PAGE_SIZE/2)) {
2427 bp->b_data = malloc(mbsize, M_BIOBUF, M_WAITOK);
2428 bp->b_bufsize = mbsize;
2429 bp->b_bcount = size;
2430 bp->b_flags |= B_MALLOC;
2431 bufmallocspace += mbsize;
2437 #if !defined(NO_B_MALLOC)
2439 * If the buffer is growing on its other-than-first allocation,
2440 * then we revert to the page-allocation scheme.
2442 if (bp->b_flags & B_MALLOC) {
2443 origbuf = bp->b_data;
2444 origbufsize = bp->b_bufsize;
2445 bp->b_data = bp->b_kvabase;
2446 if (bp->b_bufsize) {
2447 bufmallocspace -= bp->b_bufsize;
2451 bp->b_flags &= ~B_MALLOC;
2452 newbsize = round_page(newbsize);
2457 (vm_offset_t) bp->b_data + bp->b_bufsize,
2458 (vm_offset_t) bp->b_data + newbsize);
2459 #if !defined(NO_B_MALLOC)
2461 bcopy(origbuf, bp->b_data, origbufsize);
2462 free(origbuf, M_BIOBUF);
2470 newbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
2471 desiredpages = (size == 0) ? 0 :
2472 num_pages((bp->b_offset & PAGE_MASK) + newbsize);
2474 #if !defined(NO_B_MALLOC)
2475 if (bp->b_flags & B_MALLOC)
2476 panic("allocbuf: VMIO buffer can't be malloced");
2479 * Set B_CACHE initially if buffer is 0 length or will become
2482 if (size == 0 || bp->b_bufsize == 0)
2483 bp->b_flags |= B_CACHE;
2485 if (newbsize < bp->b_bufsize) {
2487 * DEV_BSIZE aligned new buffer size is less then the
2488 * DEV_BSIZE aligned existing buffer size. Figure out
2489 * if we have to remove any pages.
2491 if (desiredpages < bp->b_npages) {
2492 for (i = desiredpages; i < bp->b_npages; i++) {
2494 * the page is not freed here -- it
2495 * is the responsibility of
2496 * vnode_pager_setsize
2499 KASSERT(m != bogus_page,
2500 ("allocbuf: bogus page found"));
2501 while (vm_page_sleep_busy(m, TRUE, "biodep"))
2504 bp->b_pages[i] = NULL;
2505 vm_page_unwire(m, 0);
2507 pmap_qremove((vm_offset_t) trunc_page((vm_offset_t)bp->b_data) +
2508 (desiredpages << PAGE_SHIFT), (bp->b_npages - desiredpages));
2509 bp->b_npages = desiredpages;
2511 } else if (size > bp->b_bcount) {
2513 * We are growing the buffer, possibly in a
2514 * byte-granular fashion.
2522 * Step 1, bring in the VM pages from the object,
2523 * allocating them if necessary. We must clear
2524 * B_CACHE if these pages are not valid for the
2525 * range covered by the buffer.
2529 VOP_GETVOBJECT(vp, &obj);
2531 while (bp->b_npages < desiredpages) {
2535 pi = OFF_TO_IDX(bp->b_offset) + bp->b_npages;
2536 if ((m = vm_page_lookup(obj, pi)) == NULL) {
2538 * note: must allocate system pages
2539 * since blocking here could intefere
2540 * with paging I/O, no matter which
2543 m = vm_page_alloc(obj, pi, VM_ALLOC_NORMAL | VM_ALLOC_SYSTEM);
2546 vm_pageout_deficit += desiredpages - bp->b_npages;
2550 bp->b_flags &= ~B_CACHE;
2551 bp->b_pages[bp->b_npages] = m;
2558 * We found a page. If we have to sleep on it,
2559 * retry because it might have gotten freed out
2562 * We can only test PG_BUSY here. Blocking on
2563 * m->busy might lead to a deadlock:
2565 * vm_fault->getpages->cluster_read->allocbuf
2569 if (vm_page_sleep_busy(m, FALSE, "pgtblk"))
2573 * We have a good page. Should we wakeup the
2576 if ((curthread != pagethread) &&
2577 ((m->queue - m->pc) == PQ_CACHE) &&
2578 ((vmstats.v_free_count + vmstats.v_cache_count) <
2579 (vmstats.v_free_min + vmstats.v_cache_min))) {
2580 pagedaemon_wakeup();
2582 vm_page_flag_clear(m, PG_ZERO);
2584 bp->b_pages[bp->b_npages] = m;
2589 * Step 2. We've loaded the pages into the buffer,
2590 * we have to figure out if we can still have B_CACHE
2591 * set. Note that B_CACHE is set according to the
2592 * byte-granular range ( bcount and size ), new the
2593 * aligned range ( newbsize ).
2595 * The VM test is against m->valid, which is DEV_BSIZE
2596 * aligned. Needless to say, the validity of the data
2597 * needs to also be DEV_BSIZE aligned. Note that this
2598 * fails with NFS if the server or some other client
2599 * extends the file's EOF. If our buffer is resized,
2600 * B_CACHE may remain set! XXX
2603 toff = bp->b_bcount;
2604 tinc = PAGE_SIZE - ((bp->b_offset + toff) & PAGE_MASK);
2606 while ((bp->b_flags & B_CACHE) && toff < size) {
2609 if (tinc > (size - toff))
2612 pi = ((bp->b_offset & PAGE_MASK) + toff) >>
2627 * Step 3, fixup the KVM pmap. Remember that
2628 * bp->b_data is relative to bp->b_offset, but
2629 * bp->b_offset may be offset into the first page.
2632 bp->b_data = (caddr_t)
2633 trunc_page((vm_offset_t)bp->b_data);
2635 (vm_offset_t)bp->b_data,
2639 bp->b_data = (caddr_t)((vm_offset_t)bp->b_data |
2640 (vm_offset_t)(bp->b_offset & PAGE_MASK));
2643 if (newbsize < bp->b_bufsize)
2645 bp->b_bufsize = newbsize; /* actual buffer allocation */
2646 bp->b_bcount = size; /* requested buffer size */
2653 * Wait for buffer I/O completion, returning error status. The buffer
2654 * is left locked and B_DONE on return. B_EINTR is converted into a EINTR
2655 * error and cleared.
2658 biowait(struct buf * bp)
2663 while ((bp->b_flags & B_DONE) == 0) {
2664 #if defined(NO_SCHEDULE_MODS)
2665 tsleep(bp, 0, "biowait", 0);
2667 if (bp->b_flags & B_READ)
2668 tsleep(bp, 0, "biord", 0);
2670 tsleep(bp, 0, "biowr", 0);
2674 if (bp->b_flags & B_EINTR) {
2675 bp->b_flags &= ~B_EINTR;
2678 if (bp->b_flags & B_ERROR) {
2679 return (bp->b_error ? bp->b_error : EIO);
2688 * Finish I/O on a buffer, optionally calling a completion function.
2689 * This is usually called from an interrupt so process blocking is
2692 * biodone is also responsible for setting B_CACHE in a B_VMIO bp.
2693 * In a non-VMIO bp, B_CACHE will be set on the next getblk()
2694 * assuming B_INVAL is clear.
2696 * For the VMIO case, we set B_CACHE if the op was a read and no
2697 * read error occured, or if the op was a write. B_CACHE is never
2698 * set if the buffer is invalid or otherwise uncacheable.
2700 * biodone does not mess with B_INVAL, allowing the I/O routine or the
2701 * initiator to leave B_INVAL set to brelse the buffer out of existance
2702 * in the biodone routine.
2705 biodone(struct buf * bp)
2711 KASSERT(BUF_REFCNT(bp) > 0, ("biodone: bp %p not busy %d", bp, BUF_REFCNT(bp)));
2712 KASSERT(!(bp->b_flags & B_DONE), ("biodone: bp %p already done", bp));
2714 bp->b_flags |= B_DONE;
2715 runningbufwakeup(bp);
2717 if (bp->b_flags & B_FREEBUF) {
2723 if ((bp->b_flags & B_READ) == 0) {
2727 /* call optional completion function if requested */
2728 if (bp->b_flags & B_CALL) {
2729 bp->b_flags &= ~B_CALL;
2730 (*bp->b_iodone) (bp);
2734 if (LIST_FIRST(&bp->b_dep) != NULL && bioops.io_complete)
2735 (*bioops.io_complete)(bp);
2737 if (bp->b_flags & B_VMIO) {
2743 struct vnode *vp = bp->b_vp;
2745 error = VOP_GETVOBJECT(vp, &obj);
2747 #if defined(VFS_BIO_DEBUG)
2748 if (vp->v_holdcnt == 0) {
2749 panic("biodone: zero vnode hold count");
2753 panic("biodone: missing VM object");
2756 if ((vp->v_flag & VOBJBUF) == 0) {
2757 panic("biodone: vnode is not setup for merged cache");
2761 foff = bp->b_offset;
2762 KASSERT(bp->b_offset != NOOFFSET,
2763 ("biodone: no buffer offset"));
2766 panic("biodone: no object");
2768 #if defined(VFS_BIO_DEBUG)
2769 if (obj->paging_in_progress < bp->b_npages) {
2770 printf("biodone: paging in progress(%d) < bp->b_npages(%d)\n",
2771 obj->paging_in_progress, bp->b_npages);
2776 * Set B_CACHE if the op was a normal read and no error
2777 * occured. B_CACHE is set for writes in the b*write()
2780 iosize = bp->b_bcount - bp->b_resid;
2781 if ((bp->b_flags & (B_READ|B_FREEBUF|B_INVAL|B_NOCACHE|B_ERROR)) == B_READ) {
2782 bp->b_flags |= B_CACHE;
2785 for (i = 0; i < bp->b_npages; i++) {
2789 resid = ((foff + PAGE_SIZE) & ~(off_t)PAGE_MASK) - foff;
2794 * cleanup bogus pages, restoring the originals
2797 if (m == bogus_page) {
2799 m = vm_page_lookup(obj, OFF_TO_IDX(foff));
2801 panic("biodone: page disappeared");
2803 pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_pages, bp->b_npages);
2805 #if defined(VFS_BIO_DEBUG)
2806 if (OFF_TO_IDX(foff) != m->pindex) {
2808 "biodone: foff(%lu)/m->pindex(%d) mismatch\n",
2809 (unsigned long)foff, m->pindex);
2814 * In the write case, the valid and clean bits are
2815 * already changed correctly ( see bdwrite() ), so we
2816 * only need to do this here in the read case.
2818 if ((bp->b_flags & B_READ) && !bogusflag && resid > 0) {
2819 vfs_page_set_valid(bp, foff, i, m);
2821 vm_page_flag_clear(m, PG_ZERO);
2824 * when debugging new filesystems or buffer I/O methods, this
2825 * is the most common error that pops up. if you see this, you
2826 * have not set the page busy flag correctly!!!
2829 printf("biodone: page busy < 0, "
2830 "pindex: %d, foff: 0x(%x,%x), "
2831 "resid: %d, index: %d\n",
2832 (int) m->pindex, (int)(foff >> 32),
2833 (int) foff & 0xffffffff, resid, i);
2834 if (!vn_isdisk(vp, NULL))
2835 printf(" iosize: %ld, lblkno: %d, flags: 0x%lx, npages: %d\n",
2836 bp->b_vp->v_mount->mnt_stat.f_iosize,
2838 bp->b_flags, bp->b_npages);
2840 printf(" VDEV, lblkno: %d, flags: 0x%lx, npages: %d\n",
2842 bp->b_flags, bp->b_npages);
2843 printf(" valid: 0x%x, dirty: 0x%x, wired: %d\n",
2844 m->valid, m->dirty, m->wire_count);
2845 panic("biodone: page busy < 0\n");
2847 vm_page_io_finish(m);
2848 vm_object_pip_subtract(obj, 1);
2849 foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
2853 vm_object_pip_wakeupn(obj, 0);
2857 * For asynchronous completions, release the buffer now. The brelse
2858 * will do a wakeup there if necessary - so no need to do a wakeup
2859 * here in the async case. The sync case always needs to do a wakeup.
2862 if (bp->b_flags & B_ASYNC) {
2863 if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_ERROR | B_RELBUF)) != 0)
2874 * This routine is called in lieu of iodone in the case of
2875 * incomplete I/O. This keeps the busy status for pages
2879 vfs_unbusy_pages(struct buf * bp)
2883 runningbufwakeup(bp);
2884 if (bp->b_flags & B_VMIO) {
2885 struct vnode *vp = bp->b_vp;
2888 VOP_GETVOBJECT(vp, &obj);
2890 for (i = 0; i < bp->b_npages; i++) {
2891 vm_page_t m = bp->b_pages[i];
2893 if (m == bogus_page) {
2894 m = vm_page_lookup(obj, OFF_TO_IDX(bp->b_offset) + i);
2896 panic("vfs_unbusy_pages: page missing\n");
2899 pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_pages, bp->b_npages);
2901 vm_object_pip_subtract(obj, 1);
2902 vm_page_flag_clear(m, PG_ZERO);
2903 vm_page_io_finish(m);
2905 vm_object_pip_wakeupn(obj, 0);
2910 * vfs_page_set_valid:
2912 * Set the valid bits in a page based on the supplied offset. The
2913 * range is restricted to the buffer's size.
2915 * This routine is typically called after a read completes.
2918 vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, int pageno, vm_page_t m)
2920 vm_ooffset_t soff, eoff;
2923 * Start and end offsets in buffer. eoff - soff may not cross a
2924 * page boundry or cross the end of the buffer. The end of the
2925 * buffer, in this case, is our file EOF, not the allocation size
2929 eoff = (off + PAGE_SIZE) & ~(off_t)PAGE_MASK;
2930 if (eoff > bp->b_offset + bp->b_bcount)
2931 eoff = bp->b_offset + bp->b_bcount;
2934 * Set valid range. This is typically the entire buffer and thus the
2938 vm_page_set_validclean(
2940 (vm_offset_t) (soff & PAGE_MASK),
2941 (vm_offset_t) (eoff - soff)
2947 * This routine is called before a device strategy routine.
2948 * It is used to tell the VM system that paging I/O is in
2949 * progress, and treat the pages associated with the buffer
2950 * almost as being PG_BUSY. Also the object paging_in_progress
2951 * flag is handled to make sure that the object doesn't become
2954 * Since I/O has not been initiated yet, certain buffer flags
2955 * such as B_ERROR or B_INVAL may be in an inconsistant state
2956 * and should be ignored.
2959 vfs_busy_pages(struct buf * bp, int clear_modify)
2963 if (bp->b_flags & B_VMIO) {
2964 struct vnode *vp = bp->b_vp;
2968 VOP_GETVOBJECT(vp, &obj);
2969 foff = bp->b_offset;
2970 KASSERT(bp->b_offset != NOOFFSET,
2971 ("vfs_busy_pages: no buffer offset"));
2975 for (i = 0; i < bp->b_npages; i++) {
2976 vm_page_t m = bp->b_pages[i];
2977 if (vm_page_sleep_busy(m, FALSE, "vbpage"))
2982 for (i = 0; i < bp->b_npages; i++) {
2983 vm_page_t m = bp->b_pages[i];
2985 vm_page_flag_clear(m, PG_ZERO);
2986 if ((bp->b_flags & B_CLUSTER) == 0) {
2987 vm_object_pip_add(obj, 1);
2988 vm_page_io_start(m);
2992 * When readying a buffer for a read ( i.e
2993 * clear_modify == 0 ), it is important to do
2994 * bogus_page replacement for valid pages in
2995 * partially instantiated buffers. Partially
2996 * instantiated buffers can, in turn, occur when
2997 * reconstituting a buffer from its VM backing store
2998 * base. We only have to do this if B_CACHE is
2999 * clear ( which causes the I/O to occur in the
3000 * first place ). The replacement prevents the read
3001 * I/O from overwriting potentially dirty VM-backed
3002 * pages. XXX bogus page replacement is, uh, bogus.
3003 * It may not work properly with small-block devices.
3004 * We need to find a better way.
3007 vm_page_protect(m, VM_PROT_NONE);
3009 vfs_page_set_valid(bp, foff, i, m);
3010 else if (m->valid == VM_PAGE_BITS_ALL &&
3011 (bp->b_flags & B_CACHE) == 0) {
3012 bp->b_pages[i] = bogus_page;
3015 foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
3018 pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_pages, bp->b_npages);
3022 * This is the easiest place to put the process accounting for the I/O
3028 if ((p = curthread->td_proc) != NULL) {
3029 if (bp->b_flags & B_READ)
3030 p->p_stats->p_ru.ru_inblock++;
3032 p->p_stats->p_ru.ru_oublock++;
3038 * Tell the VM system that the pages associated with this buffer
3039 * are clean. This is used for delayed writes where the data is
3040 * going to go to disk eventually without additional VM intevention.
3042 * Note that while we only really need to clean through to b_bcount, we
3043 * just go ahead and clean through to b_bufsize.
3046 vfs_clean_pages(struct buf * bp)
3050 if (bp->b_flags & B_VMIO) {
3053 foff = bp->b_offset;
3054 KASSERT(bp->b_offset != NOOFFSET,
3055 ("vfs_clean_pages: no buffer offset"));
3056 for (i = 0; i < bp->b_npages; i++) {
3057 vm_page_t m = bp->b_pages[i];
3058 vm_ooffset_t noff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
3059 vm_ooffset_t eoff = noff;
3061 if (eoff > bp->b_offset + bp->b_bufsize)
3062 eoff = bp->b_offset + bp->b_bufsize;
3063 vfs_page_set_valid(bp, foff, i, m);
3064 /* vm_page_clear_dirty(m, foff & PAGE_MASK, eoff - foff); */
3071 * vfs_bio_set_validclean:
3073 * Set the range within the buffer to valid and clean. The range is
3074 * relative to the beginning of the buffer, b_offset. Note that b_offset
3075 * itself may be offset from the beginning of the first page.
3079 vfs_bio_set_validclean(struct buf *bp, int base, int size)
3081 if (bp->b_flags & B_VMIO) {
3086 * Fixup base to be relative to beginning of first page.
3087 * Set initial n to be the maximum number of bytes in the
3088 * first page that can be validated.
3091 base += (bp->b_offset & PAGE_MASK);
3092 n = PAGE_SIZE - (base & PAGE_MASK);
3094 for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
3095 vm_page_t m = bp->b_pages[i];
3100 vm_page_set_validclean(m, base & PAGE_MASK, n);
3111 * clear a buffer. This routine essentially fakes an I/O, so we need
3112 * to clear B_ERROR and B_INVAL.
3114 * Note that while we only theoretically need to clear through b_bcount,
3115 * we go ahead and clear through b_bufsize.
3119 vfs_bio_clrbuf(struct buf *bp)
3123 if ((bp->b_flags & (B_VMIO | B_MALLOC)) == B_VMIO) {
3124 bp->b_flags &= ~(B_INVAL|B_ERROR);
3125 if ((bp->b_npages == 1) && (bp->b_bufsize < PAGE_SIZE) &&
3126 (bp->b_offset & PAGE_MASK) == 0) {
3127 mask = (1 << (bp->b_bufsize / DEV_BSIZE)) - 1;
3128 if ((bp->b_pages[0]->valid & mask) == mask) {
3132 if (((bp->b_pages[0]->flags & PG_ZERO) == 0) &&
3133 ((bp->b_pages[0]->valid & mask) == 0)) {
3134 bzero(bp->b_data, bp->b_bufsize);
3135 bp->b_pages[0]->valid |= mask;
3140 ea = sa = bp->b_data;
3141 for(i=0;i<bp->b_npages;i++,sa=ea) {
3142 int j = ((vm_offset_t)sa & PAGE_MASK) / DEV_BSIZE;
3143 ea = (caddr_t)trunc_page((vm_offset_t)sa + PAGE_SIZE);
3144 ea = (caddr_t)(vm_offset_t)ulmin(
3145 (u_long)(vm_offset_t)ea,
3146 (u_long)(vm_offset_t)bp->b_data + bp->b_bufsize);
3147 mask = ((1 << ((ea - sa) / DEV_BSIZE)) - 1) << j;
3148 if ((bp->b_pages[i]->valid & mask) == mask)
3150 if ((bp->b_pages[i]->valid & mask) == 0) {
3151 if ((bp->b_pages[i]->flags & PG_ZERO) == 0) {
3155 for (; sa < ea; sa += DEV_BSIZE, j++) {
3156 if (((bp->b_pages[i]->flags & PG_ZERO) == 0) &&
3157 (bp->b_pages[i]->valid & (1<<j)) == 0)
3158 bzero(sa, DEV_BSIZE);
3161 bp->b_pages[i]->valid |= mask;
3162 vm_page_flag_clear(bp->b_pages[i], PG_ZERO);
3171 * vm_hold_load_pages and vm_hold_unload pages get pages into
3172 * a buffers address space. The pages are anonymous and are
3173 * not associated with a file object.
3176 vm_hold_load_pages(struct buf * bp, vm_offset_t from, vm_offset_t to)
3182 to = round_page(to);
3183 from = round_page(from);
3184 index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
3186 for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
3191 * note: must allocate system pages since blocking here
3192 * could intefere with paging I/O, no matter which
3195 p = vm_page_alloc(kernel_object,
3196 ((pg - VM_MIN_KERNEL_ADDRESS) >> PAGE_SHIFT),
3197 VM_ALLOC_NORMAL | VM_ALLOC_SYSTEM);
3199 vm_pageout_deficit += (to - from) >> PAGE_SHIFT;
3204 p->valid = VM_PAGE_BITS_ALL;
3205 vm_page_flag_clear(p, PG_ZERO);
3206 pmap_kenter(pg, VM_PAGE_TO_PHYS(p));
3207 bp->b_pages[index] = p;
3210 bp->b_npages = index;
3214 vm_hold_free_pages(struct buf * bp, vm_offset_t from, vm_offset_t to)
3218 int index, newnpages;
3220 from = round_page(from);
3221 to = round_page(to);
3222 newnpages = index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
3224 for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
3225 p = bp->b_pages[index];
3226 if (p && (index < bp->b_npages)) {
3228 printf("vm_hold_free_pages: blkno: %d, lblkno: %d\n",
3229 bp->b_blkno, bp->b_lblkno);
3231 bp->b_pages[index] = NULL;
3234 vm_page_unwire(p, 0);
3238 bp->b_npages = newnpages;
3242 * Map an IO request into kernel virtual address space.
3244 * All requests are (re)mapped into kernel VA space.
3245 * Notice that we use b_bufsize for the size of the buffer
3246 * to be mapped. b_bcount might be modified by the driver.
3249 vmapbuf(struct buf *bp)
3251 caddr_t addr, v, kva;
3257 if ((bp->b_flags & B_PHYS) == 0)
3259 if (bp->b_bufsize < 0)
3261 for (v = bp->b_saveaddr,
3262 addr = (caddr_t)trunc_page((vm_offset_t)bp->b_data),
3264 addr < bp->b_data + bp->b_bufsize;
3265 addr += PAGE_SIZE, v += PAGE_SIZE, pidx++) {
3267 * Do the vm_fault if needed; do the copy-on-write thing
3268 * when reading stuff off device into memory.
3271 i = vm_fault_quick((addr >= bp->b_data) ? addr : bp->b_data,
3272 (bp->b_flags&B_READ)?(VM_PROT_READ|VM_PROT_WRITE):VM_PROT_READ);
3274 for (i = 0; i < pidx; ++i) {
3275 vm_page_unhold(bp->b_pages[i]);
3276 bp->b_pages[i] = NULL;
3282 * WARNING! If sparc support is MFCd in the future this will
3283 * have to be changed from pmap_kextract() to pmap_extract()
3287 #error "If MFCing sparc support use pmap_extract"
3289 pa = pmap_kextract((vm_offset_t)addr);
3291 printf("vmapbuf: warning, race against user address during I/O");
3294 m = PHYS_TO_VM_PAGE(pa);
3296 bp->b_pages[pidx] = m;
3298 if (pidx > btoc(MAXPHYS))
3299 panic("vmapbuf: mapped more than MAXPHYS");
3300 pmap_qenter((vm_offset_t)bp->b_saveaddr, bp->b_pages, pidx);
3302 kva = bp->b_saveaddr;
3303 bp->b_npages = pidx;
3304 bp->b_saveaddr = bp->b_data;
3305 bp->b_data = kva + (((vm_offset_t) bp->b_data) & PAGE_MASK);
3310 * Free the io map PTEs associated with this IO operation.
3311 * We also invalidate the TLB entries and restore the original b_addr.
3321 if ((bp->b_flags & B_PHYS) == 0)
3324 npages = bp->b_npages;
3325 pmap_qremove(trunc_page((vm_offset_t)bp->b_data),
3328 for (pidx = 0; pidx < npages; pidx++)
3329 vm_page_unhold(*m++);
3331 bp->b_data = bp->b_saveaddr;
3334 #include "opt_ddb.h"
3336 #include <ddb/ddb.h>
3338 DB_SHOW_COMMAND(buffer, db_show_buffer)
3341 struct buf *bp = (struct buf *)addr;
3344 db_printf("usage: show buffer <addr>\n");
3348 db_printf("b_flags = 0x%b\n", (u_int)bp->b_flags, PRINT_BUF_FLAGS);
3349 db_printf("b_error = %d, b_bufsize = %ld, b_bcount = %ld, "
3350 "b_resid = %ld\nb_dev = (%d,%d), b_data = %p, "
3351 "b_blkno = %d, b_pblkno = %d\n",
3352 bp->b_error, bp->b_bufsize, bp->b_bcount, bp->b_resid,
3353 major(bp->b_dev), minor(bp->b_dev),
3354 bp->b_data, bp->b_blkno, bp->b_pblkno);
3357 db_printf("b_npages = %d, pages(OBJ, IDX, PA): ", bp->b_npages);
3358 for (i = 0; i < bp->b_npages; i++) {
3361 db_printf("(%p, 0x%lx, 0x%lx)", (void *)m->object,
3362 (u_long)m->pindex, (u_long)VM_PAGE_TO_PHYS(m));
3363 if ((i + 1) < bp->b_npages)