4 * Copyright (c) 2010 The DragonFly Project. All rights reserved.
6 * This code is derived from software contributed to The DragonFly Project
7 * by Matthew Dillon <dillon@backplane.com>
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in
17 * the documentation and/or other materials provided with the
19 * 3. Neither the name of The DragonFly Project nor the names of its
20 * contributors may be used to endorse or promote products derived
21 * from this software without specific, prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
27 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 * Implement the swapcache daemon. When enabled swap is assumed to be
39 * configured on a fast storage device such as a SSD. Swap is assigned
40 * to clean vnode-backed pages in the inactive queue, clustered by object
41 * if possible, and written out. The swap assignment sticks around even
42 * after the underlying pages have been recycled.
44 * The daemon manages write bandwidth based on sysctl settings to control
47 * The vnode strategy code will check for the swap assignments and divert
48 * reads to the swap device when the data is present in the swapcache.
50 * This operates on both regular files and the block device vnodes used by
51 * filesystems to manage meta-data.
55 #include <sys/param.h>
56 #include <sys/systm.h>
57 #include <sys/kernel.h>
59 #include <sys/kthread.h>
60 #include <sys/resourcevar.h>
61 #include <sys/signalvar.h>
62 #include <sys/vnode.h>
63 #include <sys/vmmeter.h>
64 #include <sys/sysctl.h>
67 #include <vm/vm_param.h>
69 #include <vm/vm_object.h>
70 #include <vm/vm_page.h>
71 #include <vm/vm_map.h>
72 #include <vm/vm_pageout.h>
73 #include <vm/vm_pager.h>
74 #include <vm/swap_pager.h>
75 #include <vm/vm_extern.h>
77 #include <sys/thread2.h>
78 #include <sys/mplock2.h>
79 #include <vm/vm_page2.h>
81 #define INACTIVE_LIST (&vm_page_queues[PQ_INACTIVE].pl)
83 /* the kernel process "vm_pageout"*/
84 static int vm_swapcached_flush (vm_page_t m, int isblkdev);
85 static int vm_swapcache_test(vm_page_t m);
86 static void vm_swapcache_writing(vm_page_t marker);
87 static void vm_swapcache_cleaning(vm_object_t marker);
88 struct thread *swapcached_thread;
90 SYSCTL_NODE(_vm, OID_AUTO, swapcache, CTLFLAG_RW, NULL, NULL);
92 int vm_swapcache_read_enable;
93 int vm_swapcache_inactive_heuristic;
94 static int vm_swapcache_sleep;
95 static int vm_swapcache_maxlaunder = 256;
96 static int vm_swapcache_data_enable = 0;
97 static int vm_swapcache_meta_enable = 0;
98 static int vm_swapcache_maxswappct = 75;
99 static int vm_swapcache_hysteresis;
100 static int vm_swapcache_use_chflags = 1; /* require chflags cache */
101 static int64_t vm_swapcache_minburst = 10000000LL; /* 10MB */
102 static int64_t vm_swapcache_curburst = 4000000000LL; /* 4G after boot */
103 static int64_t vm_swapcache_maxburst = 2000000000LL; /* 2G nominal max */
104 static int64_t vm_swapcache_accrate = 100000LL; /* 100K/s */
105 static int64_t vm_swapcache_write_count;
106 static int64_t vm_swapcache_maxfilesize;
108 SYSCTL_INT(_vm_swapcache, OID_AUTO, maxlaunder,
109 CTLFLAG_RW, &vm_swapcache_maxlaunder, 0, "");
111 SYSCTL_INT(_vm_swapcache, OID_AUTO, data_enable,
112 CTLFLAG_RW, &vm_swapcache_data_enable, 0, "");
113 SYSCTL_INT(_vm_swapcache, OID_AUTO, meta_enable,
114 CTLFLAG_RW, &vm_swapcache_meta_enable, 0, "");
115 SYSCTL_INT(_vm_swapcache, OID_AUTO, read_enable,
116 CTLFLAG_RW, &vm_swapcache_read_enable, 0, "");
117 SYSCTL_INT(_vm_swapcache, OID_AUTO, maxswappct,
118 CTLFLAG_RW, &vm_swapcache_maxswappct, 0, "");
119 SYSCTL_INT(_vm_swapcache, OID_AUTO, hysteresis,
120 CTLFLAG_RW, &vm_swapcache_hysteresis, 0, "");
121 SYSCTL_INT(_vm_swapcache, OID_AUTO, use_chflags,
122 CTLFLAG_RW, &vm_swapcache_use_chflags, 0, "");
124 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, minburst,
125 CTLFLAG_RW, &vm_swapcache_minburst, 0, "");
126 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, curburst,
127 CTLFLAG_RW, &vm_swapcache_curburst, 0, "");
128 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, maxburst,
129 CTLFLAG_RW, &vm_swapcache_maxburst, 0, "");
130 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, maxfilesize,
131 CTLFLAG_RW, &vm_swapcache_maxfilesize, 0, "");
132 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, accrate,
133 CTLFLAG_RW, &vm_swapcache_accrate, 0, "");
134 SYSCTL_QUAD(_vm_swapcache, OID_AUTO, write_count,
135 CTLFLAG_RW, &vm_swapcache_write_count, 0, "");
137 #define SWAPMAX(adj) \
138 ((int64_t)vm_swap_max * (vm_swapcache_maxswappct + (adj)) / 100)
141 * vm_swapcached is the high level pageout daemon.
146 vm_swapcached_thread(void)
148 enum { SWAPC_WRITING, SWAPC_CLEANING } state = SWAPC_WRITING;
149 enum { SWAPB_BURSTING, SWAPB_RECOVERING } burst = SWAPB_BURSTING;
150 struct vm_page page_marker;
151 struct vm_object object_marker;
156 curthread->td_flags |= TDF_SYSTHREAD;
158 lwkt_gettoken(&vm_token);
162 * Initialize our marker for the inactive scan (SWAPC_WRITING)
164 bzero(&page_marker, sizeof(page_marker));
165 page_marker.flags = PG_BUSY | PG_FICTITIOUS | PG_MARKER;
166 page_marker.queue = PQ_INACTIVE;
167 page_marker.wire_count = 1;
168 TAILQ_INSERT_HEAD(INACTIVE_LIST, &page_marker, pageq);
169 vm_swapcache_hysteresis = vmstats.v_inactive_target / 2;
170 vm_swapcache_inactive_heuristic = -vm_swapcache_hysteresis;
173 * Initialize our marker for the vm_object scan (SWAPC_CLEANING)
175 bzero(&object_marker, sizeof(object_marker));
176 object_marker.type = OBJT_MARKER;
177 lwkt_gettoken(&vmobj_token);
178 TAILQ_INSERT_HEAD(&vm_object_list, &object_marker, object_list);
179 lwkt_reltoken(&vmobj_token);
183 * Check every 5 seconds when not enabled or if no swap
186 if ((vm_swapcache_data_enable == 0 &&
187 vm_swapcache_meta_enable == 0) ||
189 tsleep(&vm_swapcache_sleep, 0, "csleep", hz * 5);
194 * Polling rate when enabled is approximately 10 hz.
196 tsleep(&vm_swapcache_sleep, 0, "csleep", hz / 10);
199 * State hysteresis. Generate write activity up to 75% of
200 * swap, then clean out swap assignments down to 70%, then
203 if (state == SWAPC_WRITING) {
204 if (vm_swap_cache_use > SWAPMAX(0))
205 state = SWAPC_CLEANING;
207 if (vm_swap_cache_use < SWAPMAX(-5))
208 state = SWAPC_WRITING;
212 * We are allowed to continue accumulating burst value
213 * in either state. Allow the user to set curburst > maxburst
214 * for the initial load-in.
216 if (vm_swapcache_curburst < vm_swapcache_maxburst) {
217 vm_swapcache_curburst += vm_swapcache_accrate / 10;
218 if (vm_swapcache_curburst > vm_swapcache_maxburst)
219 vm_swapcache_curburst = vm_swapcache_maxburst;
223 * We don't want to nickle-and-dime the scan as that will
224 * create unnecessary fragmentation. The minimum burst
225 * is one-seconds worth of accumulation.
227 if (state == SWAPC_WRITING) {
228 if (vm_swapcache_curburst >= vm_swapcache_accrate) {
229 if (burst == SWAPB_BURSTING) {
230 vm_swapcache_writing(&page_marker);
231 if (vm_swapcache_curburst <= 0)
232 burst = SWAPB_RECOVERING;
233 } else if (vm_swapcache_curburst >
234 vm_swapcache_minburst) {
235 vm_swapcache_writing(&page_marker);
236 burst = SWAPB_BURSTING;
240 vm_swapcache_cleaning(&object_marker);
245 * Cleanup (NOT REACHED)
247 TAILQ_REMOVE(INACTIVE_LIST, &page_marker, pageq);
249 lwkt_reltoken(&vm_token);
251 lwkt_gettoken(&vmobj_token);
252 TAILQ_REMOVE(&vm_object_list, &object_marker, object_list);
253 lwkt_reltoken(&vmobj_token);
256 static struct kproc_desc swpc_kp = {
258 vm_swapcached_thread,
261 SYSINIT(swapcached, SI_SUB_KTHREAD_PAGE, SI_ORDER_SECOND, kproc_start, &swpc_kp)
264 * The caller must hold vm_token.
267 vm_swapcache_writing(vm_page_t marker)
276 * Deal with an overflow of the heuristic counter or if the user
277 * manually changes the hysteresis.
279 * Try to avoid small incremental pageouts by waiting for enough
280 * pages to buildup in the inactive queue to hopefully get a good
281 * burst in. This heuristic is bumped by the VM system and reset
282 * when our scan hits the end of the queue.
284 if (vm_swapcache_inactive_heuristic < -vm_swapcache_hysteresis)
285 vm_swapcache_inactive_heuristic = -vm_swapcache_hysteresis;
286 if (vm_swapcache_inactive_heuristic < 0)
290 * Scan the inactive queue from our marker to locate
291 * suitable pages to push to the swap cache.
293 * We are looking for clean vnode-backed pages.
295 * NOTE: PG_SWAPPED pages in particular are not part of
296 * our count because once the cache stabilizes we
297 * can end up with a very high datarate of VM pages
301 count = vm_swapcache_maxlaunder;
303 while ((m = TAILQ_NEXT(m, pageq)) != NULL && count--) {
304 if (m->flags & (PG_MARKER | PG_SWAPPED)) {
308 if (vm_swapcache_curburst < 0)
310 if (vm_swapcache_test(m))
320 * If data_enable is 0 do not try to swapcache data.
321 * If use_chflags is set then only swapcache data for
322 * VSWAPCACHE marked vnodes, otherwise any vnode.
324 if (vm_swapcache_data_enable == 0 ||
325 ((vp->v_flag & VSWAPCACHE) == 0 &&
326 vm_swapcache_use_chflags)) {
329 if (vm_swapcache_maxfilesize &&
331 (vm_swapcache_maxfilesize >> PAGE_SHIFT)) {
338 * The PG_NOTMETA flag only applies to pages
339 * associated with block devices.
341 if (m->flags & PG_NOTMETA)
343 if (vm_swapcache_meta_enable == 0)
352 * Ok, move the marker and soft-busy the page.
354 TAILQ_REMOVE(INACTIVE_LIST, marker, pageq);
355 TAILQ_INSERT_AFTER(INACTIVE_LIST, m, marker, pageq);
358 * Assign swap and initiate I/O.
360 * (adjust for the --count which also occurs in the loop)
362 count -= vm_swapcached_flush(m, isblkdev) - 1;
365 * Setup for next loop using marker.
371 * Cleanup marker position. If we hit the end of the
372 * list the marker is placed at the tail. Newly deactivated
373 * pages will be placed after it.
375 * Earlier inactive pages that were dirty and become clean
376 * are typically moved to the end of PQ_INACTIVE by virtue
377 * of vfs_vmio_release() when they become unwired from the
380 TAILQ_REMOVE(INACTIVE_LIST, marker, pageq);
382 TAILQ_INSERT_BEFORE(m, marker, pageq);
384 TAILQ_INSERT_TAIL(INACTIVE_LIST, marker, pageq);
385 vm_swapcache_inactive_heuristic = -vm_swapcache_hysteresis;
390 * Flush the specified page using the swap_pager.
392 * Try to collect surrounding pages, including pages which may
393 * have already been assigned swap. Try to cluster within a
394 * contiguous aligned SMAP_META_PAGES (typ 16 x PAGE_SIZE) block
395 * to match what swap_pager_putpages() can do.
397 * We also want to try to match against the buffer cache blocksize
398 * but we don't really know what it is here. Since the buffer cache
399 * wires and unwires pages in groups the fact that we skip wired pages
400 * should be sufficient.
402 * Returns a count of pages we might have flushed (minimum 1)
404 * The caller must hold vm_token.
408 vm_swapcached_flush(vm_page_t m, int isblkdev)
411 vm_page_t marray[SWAP_META_PAGES];
413 int rtvals[SWAP_META_PAGES];
420 vm_page_protect(m, VM_PROT_READ);
424 * Try to cluster around (m), keeping in mind that the swap pager
425 * can only do SMAP_META_PAGES worth of continguous write.
427 x = (int)m->pindex & SWAP_META_MASK;
431 for (i = x - 1; i >= 0; --i) {
432 m = vm_page_lookup(object, basei - x + i);
435 if (vm_swapcache_test(m))
437 if (isblkdev && (m->flags & PG_NOTMETA))
440 vm_page_protect(m, VM_PROT_READ);
441 if (m->queue - m->pc == PQ_CACHE) {
442 vm_page_unqueue_nowakeup(m);
443 vm_page_deactivate(m);
449 for (j = x + 1; j < SWAP_META_PAGES; ++j) {
450 m = vm_page_lookup(object, basei - x + j);
453 if (vm_swapcache_test(m))
455 if (isblkdev && (m->flags & PG_NOTMETA))
458 vm_page_protect(m, VM_PROT_READ);
459 if (m->queue - m->pc == PQ_CACHE) {
460 vm_page_unqueue_nowakeup(m);
461 vm_page_deactivate(m);
467 vm_object_pip_add(object, count);
468 swap_pager_putpages(object, marray + i, count, FALSE, rtvals + i);
469 vm_swapcache_write_count += count * PAGE_SIZE;
470 vm_swapcache_curburst -= count * PAGE_SIZE;
473 if (rtvals[i] != VM_PAGER_PEND) {
474 vm_page_io_finish(marray[i]);
475 vm_object_pip_wakeup(object);
483 * Test whether a VM page is suitable for writing to the swapcache.
484 * Does not test m->queue, PG_MARKER, or PG_SWAPPED.
486 * Returns 0 on success, 1 on failure
488 * The caller must hold vm_token.
491 vm_swapcache_test(vm_page_t m)
495 if (m->flags & (PG_BUSY | PG_UNMANAGED))
497 if (m->busy || m->hold_count || m->wire_count)
499 if (m->valid != VM_PAGE_BITS_ALL)
501 if (m->dirty & m->valid)
503 if ((object = m->object) == NULL)
505 if (object->type != OBJT_VNODE ||
506 (object->flags & OBJ_DEAD)) {
509 vm_page_test_dirty(m);
510 if (m->dirty & m->valid)
518 * The caller must hold vm_token.
522 vm_swapcache_cleaning(vm_object_t marker)
530 count = vm_swapcache_maxlaunder;
533 * Look for vnode objects
535 lwkt_gettoken(&vm_token);
536 lwkt_gettoken(&vmobj_token);
538 while ((object = TAILQ_NEXT(object, object_list)) != NULL && count--) {
539 if (object->type != OBJT_VNODE)
541 if ((object->flags & OBJ_DEAD) || object->swblock_count == 0)
543 if ((vp = object->handle) == NULL)
545 if (vp->v_type != VREG && vp->v_type != VCHR)
551 if (marker->backing_object != object)
555 * Move the marker so we can work on the VM object
557 TAILQ_REMOVE(&vm_object_list, marker, object_list);
558 TAILQ_INSERT_AFTER(&vm_object_list, object,
559 marker, object_list);
562 * Look for swblocks starting at our iterator.
564 * The swap_pager_condfree() function attempts to free
565 * swap space starting at the specified index. The index
566 * will be updated on return. The function will return
567 * a scan factor (NOT the number of blocks freed).
569 * If it must cut its scan of the object short due to an
570 * excessive number of swblocks, or is able to free the
571 * requested number of blocks, it will return n >= count
572 * and we break and pick it back up on a future attempt.
574 n = swap_pager_condfree(object, &marker->size, count);
587 * Adjust marker so we continue the scan from where we left off.
588 * When we reach the end we start back at the beginning.
590 TAILQ_REMOVE(&vm_object_list, marker, object_list);
592 TAILQ_INSERT_BEFORE(object, marker, object_list);
594 TAILQ_INSERT_HEAD(&vm_object_list, marker, object_list);
595 marker->backing_object = object;
597 lwkt_reltoken(&vmobj_token);
598 lwkt_reltoken(&vm_token);