sys/dev/disk/fd/fd.c

   1 /*
   2  * Copyright (c) 1990 The Regents of the University of California.
   3  * All rights reserved.
   4  *
   5  * This code is derived from software contributed to Berkeley by
   6  * Don Ahn.
   7  *
   8  * Libretto PCMCIA floppy support by David Horwitt (dhorwitt@ucsd.edu)
   9  * aided by the Linux floppy driver modifications from David Bateman
  10  * (dbateman@eng.uts.edu.au).
  11  *
  12  * Copyright (c) 1993, 1994 by
  13  *  jc@irbs.UUCP (John Capo)
  14  *  vak@zebub.msk.su (Serge Vakulenko)
  15  *  ache@astral.msk.su (Andrew A. Chernov)
  16  *
  17  * Copyright (c) 1993, 1994, 1995 by
  18  *  joerg_wunsch@uriah.sax.de (Joerg Wunsch)
  19  *  dufault@hda.com (Peter Dufault)
  20  *
  21  * Copyright (c) 2001 Joerg Wunsch,
  22  *  joerg_wunsch@uriah.sax.de (Joerg Wunsch)
  23  *
  24  * Redistribution and use in source and binary forms, with or without
  25  * modification, are permitted provided that the following conditions
  26  * are met:
  27  * 1. Redistributions of source code must retain the above copyright
  28  *    notice, this list of conditions and the following disclaimer.
  29  * 2. Redistributions in binary form must reproduce the above copyright
  30  *    notice, this list of conditions and the following disclaimer in the
  31  *    documentation and/or other materials provided with the distribution.
  32  * 3. All advertising materials mentioning features or use of this software
  33  *    must display the following acknowledgement:
  34  *      This product includes software developed by the University of
  35  *      California, Berkeley and its contributors.
  36  * 4. Neither the name of the University nor the names of its contributors
  37  *    may be used to endorse or promote products derived from this software
  38  *    without specific prior written permission.
  39  *
  40  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  41  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  42  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  43  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  44  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  45  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  46  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  47  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  48  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  49  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  50  * SUCH DAMAGE.
  51  *
  52  *      from:   @(#)fd.c        7.4 (Berkeley) 5/25/91
  53  * $FreeBSD: src/sys/isa/fd.c,v 1.176.2.8 2002/05/15 21:56:14 joerg Exp $
  54  * $DragonFly: src/sys/dev/disk/fd/fd.c,v 1.43 2008/08/13 08:18:09 swildner Exp $
  55  *
  56  */
  57
  58 #include "opt_fdc.h"
  59 #include "use_pccard.h"
  60
  61 #include <sys/param.h>
  62 #include <sys/systm.h>
  63 #include <sys/bootmaj.h>
  64 #include <sys/kernel.h>
  65 #include <sys/buf.h>
  66 #include <sys/bus.h>
  67 #include <sys/conf.h>
  68 #include <sys/diskslice.h>
  69 #include <sys/disk.h>
  70 #include <sys/devicestat.h>
  71 #include <sys/fcntl.h>
  72 #include <sys/malloc.h>
  73 #include <sys/module.h>
  74 #include <sys/proc.h>
  75 #include <sys/priv.h>
  76 #include <sys/syslog.h>
  77 #include <sys/device.h>
  78 #include <sys/bus.h>
  79 #include <sys/rman.h>
  80 #include <sys/buf2.h>
  81 #include <sys/thread2.h>
  82
  83 #include <machine/clock.h>
  84 #include <machine/ioctl_fd.h>
  85 #include <machine/stdarg.h>
  86
  87 #include <bus/isa/isavar.h>
  88 #include <bus/isa/isareg.h>
  89 #include "fdreg.h"
  90 #include "fdc.h"
  91 #include <bus/isa/rtc.h>
  92
  93 /* configuration flags */
  94 #define FDC_PRETEND_D0  (1 << 0)        /* pretend drive 0 to be there */
  95 #define FDC_NO_FIFO     (1 << 2)        /* do not enable FIFO  */
  96
  97 /* internally used only, not really from CMOS: */
  98 #define RTCFDT_144M_PRETENDED   0x1000
  99
 100 /* error returns for fd_cmd() */
 101 #define FD_FAILED -1
 102 #define FD_NOT_VALID -2
 103 #define FDC_ERRMAX      100     /* do not log more */
 104 /*
 105  * Stop retrying after this many DMA overruns.  Since each retry takes
 106  * one revolution, with 300 rpm., 25 retries take approximately 10
 107  * seconds which the read attempt will block in case the DMA overrun
 108  * is persistent.
 109  */
 110 #define FDC_DMAOV_MAX   25
 111
 112 /*
 113  * Timeout value for the PIO loops to wait until the FDC main status
 114  * register matches our expectations (request for master, direction
 115  * bit).  This is supposed to be a number of microseconds, although
 116  * timing might actually not be very accurate.
 117  *
 118  * Timeouts of 100 msec are believed to be required for some broken
 119  * (old) hardware.
 120  */
 121 #define FDSTS_TIMEOUT   100000
 122
 123 #define NUMTYPES 17
 124 #define NUMDENS  (NUMTYPES - 7)
 125
 126 /* These defines (-1) must match index for fd_types */
 127 #define F_TAPE_TYPE     0x020   /* bit for fd_types to indicate tape */
 128 #define NO_TYPE         0       /* must match NO_TYPE in ft.c */
 129 #define FD_1720         1
 130 #define FD_1480         2
 131 #define FD_1440         3
 132 #define FD_1200         4
 133 #define FD_820          5
 134 #define FD_800          6
 135 #define FD_720          7
 136 #define FD_360          8
 137 #define FD_640          9
 138 #define FD_1232         10
 139
 140 #define FD_1480in5_25   11
 141 #define FD_1440in5_25   12
 142 #define FD_820in5_25    13
 143 #define FD_800in5_25    14
 144 #define FD_720in5_25    15
 145 #define FD_360in5_25    16
 146 #define FD_640in5_25    17
 147
 148
 149 static struct fd_type fd_types[NUMTYPES] =
 150 {
 151 { 21,2,0xFF,0x04,82,3444,1,FDC_500KBPS,2,0x0C,2 }, /* 1.72M in HD 3.5in */
 152 { 18,2,0xFF,0x1B,82,2952,1,FDC_500KBPS,2,0x6C,1 }, /* 1.48M in HD 3.5in */
 153 { 18,2,0xFF,0x1B,80,2880,1,FDC_500KBPS,2,0x6C,1 }, /* 1.44M in HD 3.5in */
 154 { 15,2,0xFF,0x1B,80,2400,1,FDC_500KBPS,2,0x54,1 }, /*  1.2M in HD 5.25/3.5 */
 155 { 10,2,0xFF,0x10,82,1640,1,FDC_250KBPS,2,0x2E,1 }, /*  820K in HD 3.5in */
 156 { 10,2,0xFF,0x10,80,1600,1,FDC_250KBPS,2,0x2E,1 }, /*  800K in HD 3.5in */
 157 {  9,2,0xFF,0x20,80,1440,1,FDC_250KBPS,2,0x50,1 }, /*  720K in HD 3.5in */
 158 {  9,2,0xFF,0x2A,40, 720,1,FDC_250KBPS,2,0x50,1 }, /*  360K in DD 5.25in */
 159 {  8,2,0xFF,0x2A,80,1280,1,FDC_250KBPS,2,0x50,1 }, /*  640K in DD 5.25in */
 160 {  8,3,0xFF,0x35,77,1232,1,FDC_500KBPS,2,0x74,1 }, /* 1.23M in HD 5.25in */
 161
 162 { 18,2,0xFF,0x02,82,2952,1,FDC_500KBPS,2,0x02,2 }, /* 1.48M in HD 5.25in */
 163 { 18,2,0xFF,0x02,80,2880,1,FDC_500KBPS,2,0x02,2 }, /* 1.44M in HD 5.25in */
 164 { 10,2,0xFF,0x10,82,1640,1,FDC_300KBPS,2,0x2E,1 }, /*  820K in HD 5.25in */
 165 { 10,2,0xFF,0x10,80,1600,1,FDC_300KBPS,2,0x2E,1 }, /*  800K in HD 5.25in */
 166 {  9,2,0xFF,0x20,80,1440,1,FDC_300KBPS,2,0x50,1 }, /*  720K in HD 5.25in */
 167 {  9,2,0xFF,0x23,40, 720,2,FDC_300KBPS,2,0x50,1 }, /*  360K in HD 5.25in */
 168 {  8,2,0xFF,0x2A,80,1280,1,FDC_300KBPS,2,0x50,1 }, /*  640K in HD 5.25in */
 169 };
 170
 171 #define DRVS_PER_CTLR 2         /* 2 floppies */
 172
 173 /***********************************************************************\
 174 * Per controller structure.                                             *
 175 \***********************************************************************/
 176 devclass_t fdc_devclass;
 177
 178 /***********************************************************************\
 179 * Per drive structure.                                                  *
 180 * N per controller  (DRVS_PER_CTLR)                                     *
 181 \***********************************************************************/
 182 struct fd_data {
 183         struct  fdc_data *fdc;  /* pointer to controller structure */
 184         int     fdsu;           /* this units number on this controller */
 185         int     type;           /* Drive type (FD_1440...) */
 186         struct  fd_type ft;     /* the type descriptor */
 187         int     flags;
 188 #define FD_OPEN         0x01    /* it's open            */
 189 #define FD_ACTIVE       0x02    /* it's active          */
 190 #define FD_MOTOR        0x04    /* motor should be on   */
 191 #define FD_MOTOR_WAIT   0x08    /* motor coming up      */
 192         int     skip;
 193         int     hddrv;
 194 #define FD_NO_TRACK -2
 195         int     track;          /* where we think the head is */
 196         int     options;        /* user configurable options, see ioctl_fd.h */
 197         struct  callout toffhandle;
 198         struct  callout tohandle;
 199         struct  callout motor;
 200         struct  disk disk;
 201         struct  devstat device_stats;
 202         device_t dev;
 203         fdu_t   fdu;
 204 };
 205
 206 struct fdc_ivars {
 207         int     fdunit;
 208 };
 209 static devclass_t fd_devclass;
 210
 211 /***********************************************************************\
 212 * Throughout this file the following conventions will be used:          *
 213 * fd is a pointer to the fd_data struct for the drive in question       *
 214 * fdc is a pointer to the fdc_data struct for the controller            *
 215 * fdu is the floppy drive unit number                                   *
 216 * fdcu is the floppy controller unit number                             *
 217 * fdsu is the floppy drive unit number on that controller. (sub-unit)   *
 218 \***********************************************************************/
 219
 220 /* internal functions */
 221 static  void fdc_intr(void *);
 222 static void set_motor(struct fdc_data *, int, int);
 223 #  define TURNON 1
 224 #  define TURNOFF 0
 225 static timeout_t fd_turnoff;
 226 static timeout_t fd_motor_on;
 227 static void fd_turnon(struct fd_data *);
 228 static void fdc_reset(fdc_p);
 229 static int fd_in(struct fdc_data *, int *);
 230 static int out_fdc(struct fdc_data *, int);
 231 static void fdstart(struct fdc_data *);
 232 static timeout_t fd_iotimeout;
 233 static timeout_t fd_pseudointr;
 234 static int fdstate(struct fdc_data *);
 235 static int retrier(struct fdc_data *);
 236 static int fdformat(cdev_t, struct fd_formb *, struct ucred *);
 237
 238 static int enable_fifo(fdc_p fdc);
 239
 240 static int fifo_threshold = 8;  /* XXX: should be accessible via sysctl */
 241
 242
 243 #define DEVIDLE         0
 244 #define FINDWORK        1
 245 #define DOSEEK          2
 246 #define SEEKCOMPLETE    3
 247 #define IOCOMPLETE      4
 248 #define RECALCOMPLETE   5
 249 #define STARTRECAL      6
 250 #define RESETCTLR       7
 251 #define SEEKWAIT        8
 252 #define RECALWAIT       9
 253 #define MOTORWAIT       10
 254 #define IOTIMEDOUT      11
 255 #define RESETCOMPLETE   12
 256 #define PIOREAD         13
 257
 258 #ifdef  FDC_DEBUG
 259 static char const * const fdstates[] =
 260 {
 261 "DEVIDLE",
 262 "FINDWORK",
 263 "DOSEEK",
 264 "SEEKCOMPLETE",
 265 "IOCOMPLETE",
 266 "RECALCOMPLETE",
 267 "STARTRECAL",
 268 "RESETCTLR",
 269 "SEEKWAIT",
 270 "RECALWAIT",
 271 "MOTORWAIT",
 272 "IOTIMEDOUT",
 273 "RESETCOMPLETE",
 274 "PIOREAD",
 275 };
 276
 277 /* CAUTION: fd_debug causes huge amounts of logging output */
 278 static int volatile fd_debug = 0;
 279 #define TRACE0(arg) if(fd_debug) kprintf(arg)
 280 #define TRACE1(arg1, arg2) if(fd_debug) kprintf(arg1, arg2)
 281 #else /* FDC_DEBUG */
 282 #define TRACE0(arg)
 283 #define TRACE1(arg1, arg2)
 284 #endif /* FDC_DEBUG */
 285
 286 void
 287 fdout_wr(fdc_p fdc, u_int8_t v)
 288 {
 289         bus_space_write_1(fdc->portt, fdc->porth, FDOUT+fdc->port_off, v);
 290 }
 291
 292 static u_int8_t
 293 fdsts_rd(fdc_p fdc)
 294 {
 295         return bus_space_read_1(fdc->portt, fdc->porth, FDSTS+fdc->port_off);
 296 }
 297
 298 static void
 299 fddata_wr(fdc_p fdc, u_int8_t v)
 300 {
 301         bus_space_write_1(fdc->portt, fdc->porth, FDDATA+fdc->port_off, v);
 302 }
 303
 304 static u_int8_t
 305 fddata_rd(fdc_p fdc)
 306 {
 307         return bus_space_read_1(fdc->portt, fdc->porth, FDDATA+fdc->port_off);
 308 }
 309
 310 static void
 311 fdctl_wr_isa(fdc_p fdc, u_int8_t v)
 312 {
 313         bus_space_write_1(fdc->ctlt, fdc->ctlh, 0, v);
 314 }
 315
 316 #if 0
 317
 318 static u_int8_t
 319 fdin_rd(fdc_p fdc)
 320 {
 321         return bus_space_read_1(fdc->portt, fdc->porth, FDIN);
 322 }
 323
 324 #endif
 325
 326 static  d_open_t        Fdopen; /* NOTE, not fdopen */
 327 static  d_close_t       fdclose;
 328 static  d_ioctl_t       fdioctl;
 329 static  d_strategy_t    fdstrategy;
 330
 331 static struct dev_ops fd_ops = {
 332         { "fd", FD_CDEV_MAJOR, D_DISK },
 333         .d_open =       Fdopen,
 334         .d_close =      fdclose,
 335         .d_read =       physread,
 336         .d_write =      physwrite,
 337         .d_ioctl =      fdioctl,
 338         .d_strategy =   fdstrategy,
 339 };
 340
 341 static int
 342 fdc_err(struct fdc_data *fdc, const char *s)
 343 {
 344         fdc->fdc_errs++;
 345         if (s) {
 346                 if (fdc->fdc_errs < FDC_ERRMAX)
 347                         device_printf(fdc->fdc_dev, "%s", s);
 348                 else if (fdc->fdc_errs == FDC_ERRMAX)
 349                         device_printf(fdc->fdc_dev, "too many errors, not "
 350                                                     "logging any more\n");
 351         }
 352
 353         return FD_FAILED;
 354 }
 355
 356 /*
 357  * fd_cmd: Send a command to the chip.  Takes a varargs with this structure:
 358  * Unit number,
 359  * # of output bytes, output bytes as ints ...,
 360  * # of input bytes, input bytes as ints ...
 361  */
 362 int
 363 fd_cmd(struct fdc_data *fdc, int n_out, ...)
 364 {
 365         u_char cmd;
 366         int n_in;
 367         int n;
 368         __va_list ap;
 369
 370         __va_start(ap, n_out);
 371         cmd = (u_char)(__va_arg(ap, int));
 372         __va_end(ap);
 373         __va_start(ap, n_out);
 374         for (n = 0; n < n_out; n++)
 375         {
 376                 if (out_fdc(fdc, __va_arg(ap, int)) < 0)
 377                 {
 378                         char msg[50];
 379                         ksnprintf(msg, sizeof(msg),
 380                                 "cmd %x failed at out byte %d of %d\n",
 381                                 cmd, n + 1, n_out);
 382                         return fdc_err(fdc, msg);
 383                 }
 384         }
 385         n_in = __va_arg(ap, int);
 386         for (n = 0; n < n_in; n++)
 387         {
 388                 int *ptr = __va_arg(ap, int *);
 389                 if (fd_in(fdc, ptr) < 0)
 390                 {
 391                         char msg[50];
 392                         ksnprintf(msg, sizeof(msg),
 393                                 "cmd %02x failed at in byte %d of %d\n",
 394                                 cmd, n + 1, n_in);
 395                         return fdc_err(fdc, msg);
 396                 }
 397         }
 398
 399         return 0;
 400 }
 401
 402 static int
 403 enable_fifo(fdc_p fdc)
 404 {
 405         int i, j;
 406
 407         if ((fdc->flags & FDC_HAS_FIFO) == 0) {
 408
 409                 /*
 410                  * XXX:
 411                  * Cannot use fd_cmd the normal way here, since
 412                  * this might be an invalid command. Thus we send the
 413                  * first byte, and check for an early turn of data directon.
 414                  */
 415
 416                 if (out_fdc(fdc, I8207X_CONFIGURE) < 0)
 417                         return fdc_err(fdc, "Enable FIFO failed\n");
 418
 419                 /* If command is invalid, return */
 420                 j = FDSTS_TIMEOUT;
 421                 while ((i = fdsts_rd(fdc) & (NE7_DIO | NE7_RQM))
 422                        != NE7_RQM && j-- > 0) {
 423                         if (i == (NE7_DIO | NE7_RQM)) {
 424                                 fdc_reset(fdc);
 425                                 return FD_FAILED;
 426                         }
 427                         DELAY(1);
 428                 }
 429                 if (j<0 ||
 430                     fd_cmd(fdc, 3,
 431                            0, (fifo_threshold - 1) & 0xf, 0, 0) < 0) {
 432                         fdc_reset(fdc);
 433                         return fdc_err(fdc, "Enable FIFO failed\n");
 434                 }
 435                 fdc->flags |= FDC_HAS_FIFO;
 436                 return 0;
 437         }
 438         if (fd_cmd(fdc, 4,
 439                    I8207X_CONFIGURE, 0, (fifo_threshold - 1) & 0xf, 0, 0) < 0)
 440                 return fdc_err(fdc, "Re-enable FIFO failed\n");
 441         return 0;
 442 }
 443
 444 static int
 445 fd_sense_drive_status(fdc_p fdc, int *st3p)
 446 {
 447         int st3;
 448
 449         if (fd_cmd(fdc, 2, NE7CMD_SENSED, fdc->fdu, 1, &st3))
 450         {
 451                 return fdc_err(fdc, "Sense Drive Status failed\n");
 452         }
 453         if (st3p)
 454                 *st3p = st3;
 455
 456         return 0;
 457 }
 458
 459 static int
 460 fd_sense_int(fdc_p fdc, int *st0p, int *cylp)
 461 {
 462         int cyl, st0, ret;
 463
 464         ret = fd_cmd(fdc, 1, NE7CMD_SENSEI, 1, &st0);
 465         if (ret) {
 466                 (void)fdc_err(fdc,
 467                               "sense intr err reading stat reg 0\n");
 468                 return ret;
 469         }
 470
 471         if (st0p)
 472                 *st0p = st0;
 473
 474         if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV) {
 475                 /*
 476                  * There doesn't seem to have been an interrupt.
 477                  */
 478                 return FD_NOT_VALID;
 479         }
 480
 481         if (fd_in(fdc, &cyl) < 0) {
 482                 return fdc_err(fdc, "can't get cyl num\n");
 483         }
 484
 485         if (cylp)
 486                 *cylp = cyl;
 487
 488         return 0;
 489 }
 490
 491
 492 static int
 493 fd_read_status(fdc_p fdc, int fdsu)
 494 {
 495         int i, ret;
 496
 497         for (i = 0; i < 7; i++) {
 498                 /*
 499                  * XXX types are poorly chosen.  Only bytes can by read
 500                  * from the hardware, but fdc->status[] wants u_ints and
 501                  * fd_in() gives ints.
 502                  */
 503                 int status;
 504
 505                 ret = fd_in(fdc, &status);
 506                 fdc->status[i] = status;
 507                 if (ret != 0)
 508                         break;
 509         }
 510
 511         if (ret == 0)
 512                 fdc->flags |= FDC_STAT_VALID;
 513         else
 514                 fdc->flags &= ~FDC_STAT_VALID;
 515
 516         return ret;
 517 }
 518
 519 /****************************************************************************/
 520 /*                      autoconfiguration stuff                             */
 521 /****************************************************************************/
 522
 523 int
 524 fdc_alloc_resources(struct fdc_data *fdc)
 525 {
 526         device_t dev;
 527         int ispnp, ispcmcia;
 528
 529         dev = fdc->fdc_dev;
 530         ispnp = (fdc->flags & FDC_ISPNP) != 0;
 531         ispcmcia = (fdc->flags & FDC_ISPCMCIA) != 0;
 532         fdc->rid_ioport = fdc->rid_irq = fdc->rid_drq = 0;
 533         fdc->res_ioport = fdc->res_irq = fdc->res_drq = 0;
 534
 535         /*
 536          * On standard ISA, we don't just use an 8 port range
 537          * (e.g. 0x3f0-0x3f7) since that covers an IDE control
 538          * register at 0x3f6.
 539          *
 540          * Isn't PC hardware wonderful.
 541          *
 542          * The Y-E Data PCMCIA FDC doesn't have this problem, it
 543          * uses the register with offset 6 for pseudo-DMA, and the
 544          * one with offset 7 as control register.
 545          */
 546         fdc->res_ioport = bus_alloc_resource(dev, SYS_RES_IOPORT,
 547                                              &fdc->rid_ioport, 0ul, ~0ul,
 548                                              ispcmcia ? 8 : (ispnp ? 1 : 6),
 549                                              RF_ACTIVE);
 550         if (fdc->res_ioport == 0) {
 551                 device_printf(dev, "cannot reserve I/O port range\n");
 552                 return ENXIO;
 553         }
 554         fdc->portt = rman_get_bustag(fdc->res_ioport);
 555         fdc->porth = rman_get_bushandle(fdc->res_ioport);
 556
 557         if (!ispcmcia) {
 558                 /*
 559                  * Some BIOSen report the device at 0x3f2-0x3f5,0x3f7
 560                  * and some at 0x3f0-0x3f5,0x3f7. We detect the former
 561                  * by checking the size and adjust the port address
 562                  * accordingly.
 563                  */
 564                 if (bus_get_resource_count(dev, SYS_RES_IOPORT, 0) == 4)
 565                         fdc->port_off = -2;
 566
 567                 /*
 568                  * Register the control port range as rid 1 if it
 569                  * isn't there already. Most PnP BIOSen will have
 570                  * already done this but non-PnP configurations don't.
 571                  *
 572                  * And some (!!) report 0x3f2-0x3f5 and completely
 573                  * leave out the control register!  It seems that some
 574                  * non-antique controller chips have a different
 575                  * method of programming the transfer speed which
 576                  * doesn't require the control register, but it's
 577                  * mighty bogus as the chip still responds to the
 578                  * address for the control register.
 579                  */
 580                 if (bus_get_resource_count(dev, SYS_RES_IOPORT, 1) == 0) {
 581                         u_long ctlstart;
 582
 583                         /* Find the control port, usually 0x3f7 */
 584                         ctlstart = rman_get_start(fdc->res_ioport) +
 585                                 fdc->port_off + 7;
 586
 587                         bus_set_resource(dev, SYS_RES_IOPORT, 1, ctlstart, 1);
 588                 }
 589
 590                 /*
 591                  * Now (finally!) allocate the control port.
 592                  */
 593                 fdc->rid_ctl = 1;
 594                 fdc->res_ctl = bus_alloc_resource(dev, SYS_RES_IOPORT,
 595                                                   &fdc->rid_ctl,
 596                                                   0ul, ~0ul, 1, RF_ACTIVE);
 597                 if (fdc->res_ctl == 0) {
 598                         device_printf(dev,
 599                                       "cannot reserve control I/O port range\n");
 600                         return ENXIO;
 601                 }
 602                 fdc->ctlt = rman_get_bustag(fdc->res_ctl);
 603                 fdc->ctlh = rman_get_bushandle(fdc->res_ctl);
 604         }
 605
 606         fdc->res_irq = bus_alloc_resource(dev, SYS_RES_IRQ,
 607                                           &fdc->rid_irq, 0ul, ~0ul, 1,
 608                                           RF_ACTIVE);
 609         if (fdc->res_irq == 0) {
 610                 device_printf(dev, "cannot reserve interrupt line\n");
 611                 return ENXIO;
 612         }
 613
 614         if ((fdc->flags & FDC_NODMA) == 0) {
 615                 fdc->res_drq = bus_alloc_resource(dev, SYS_RES_DRQ,
 616                                                   &fdc->rid_drq, 0ul, ~0ul, 1,
 617                                                   RF_ACTIVE);
 618                 if (fdc->res_drq == 0) {
 619                         device_printf(dev, "cannot reserve DMA request line\n");
 620                         return ENXIO;
 621                 }
 622                 fdc->dmachan = fdc->res_drq->r_start;
 623         }
 624
 625         return 0;
 626 }
 627
 628 void
 629 fdc_release_resources(struct fdc_data *fdc)
 630 {
 631         device_t dev;
 632
 633         dev = fdc->fdc_dev;
 634         if (fdc->res_irq != 0) {
 635                 bus_deactivate_resource(dev, SYS_RES_IRQ, fdc->rid_irq,
 636                                         fdc->res_irq);
 637                 bus_release_resource(dev, SYS_RES_IRQ, fdc->rid_irq,
 638                                      fdc->res_irq);
 639         }
 640         if (fdc->res_ctl != 0) {
 641                 bus_deactivate_resource(dev, SYS_RES_IOPORT, fdc->rid_ctl,
 642                                         fdc->res_ctl);
 643                 bus_release_resource(dev, SYS_RES_IOPORT, fdc->rid_ctl,
 644                                      fdc->res_ctl);
 645         }
 646         if (fdc->res_ioport != 0) {
 647                 bus_deactivate_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport,
 648                                         fdc->res_ioport);
 649                 bus_release_resource(dev, SYS_RES_IOPORT, fdc->rid_ioport,
 650                                      fdc->res_ioport);
 651         }
 652         if (fdc->res_drq != 0) {
 653                 bus_deactivate_resource(dev, SYS_RES_DRQ, fdc->rid_drq,
 654                                         fdc->res_drq);
 655                 bus_release_resource(dev, SYS_RES_DRQ, fdc->rid_drq,
 656                                      fdc->res_drq);
 657         }
 658 }
 659
 660 /****************************************************************************/
 661 /*                      autoconfiguration stuff                             */
 662 /****************************************************************************/
 663
 664 static struct isa_pnp_id fdc_ids[] = {
 665         {0x0007d041, "PC standard floppy disk controller"}, /* PNP0700 */
 666         {0x0107d041, "Standard floppy controller supporting MS Device Bay Spec"}, /* PNP0701 */
 667         {0}
 668 };
 669
 670 int
 671 fdc_read_ivar(device_t dev, device_t child, int which, u_long *result)
 672 {
 673         struct fdc_ivars *ivars = device_get_ivars(child);
 674
 675         switch (which) {
 676         case FDC_IVAR_FDUNIT:
 677                 *result = ivars->fdunit;
 678                 break;
 679         default:
 680                 return ENOENT;
 681         }
 682         return 0;
 683 }
 684
 685 /*
 686  * fdc controller section.
 687  */
 688 static int
 689 fdc_probe(device_t dev)
 690 {
 691         int     error, ic_type;
 692         struct  fdc_data *fdc;
 693
 694         fdc = device_get_softc(dev);
 695         bzero(fdc, sizeof *fdc);
 696         fdc->fdc_dev = dev;
 697         fdc->fdctl_wr = fdctl_wr_isa;
 698
 699         /* Check pnp ids */
 700         error = ISA_PNP_PROBE(device_get_parent(dev), dev, fdc_ids);
 701         if (error == ENXIO)
 702                 return ENXIO;
 703         if (error == 0)
 704                 fdc->flags |= FDC_ISPNP;
 705
 706         /* Attempt to allocate our resources for the duration of the probe */
 707         error = fdc_alloc_resources(fdc);
 708         if (error)
 709                 goto out;
 710
 711         /* First - lets reset the floppy controller */
 712         fdout_wr(fdc, 0);
 713         DELAY(100);
 714         fdout_wr(fdc, FDO_FRST);
 715
 716         /* see if it can handle a command */
 717         if (fd_cmd(fdc, 3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240),
 718                    NE7_SPEC_2(2, 0), 0)) {
 719                 error = ENXIO;
 720                 goto out;
 721         }
 722
 723         if (fd_cmd(fdc, 1, NE7CMD_VERSION, 1, &ic_type) == 0) {
 724                 ic_type = (u_char)ic_type;
 725                 switch (ic_type) {
 726                 case 0x80:
 727                         device_set_desc(dev, "NEC 765 or clone");
 728                         fdc->fdct = FDC_NE765;
 729                         break;
 730                 case 0x81:
 731                         device_set_desc(dev, "Intel 82077 or clone");
 732                         fdc->fdct = FDC_I82077;
 733                         break;
 734                 case 0x90:
 735                         device_set_desc(dev, "NEC 72065B or clone");
 736                         fdc->fdct = FDC_NE72065;
 737                         break;
 738                 default:
 739                         device_set_desc(dev, "generic floppy controller");
 740                         fdc->fdct = FDC_UNKNOWN;
 741                         break;
 742                 }
 743         }
 744
 745 out:
 746         fdc_release_resources(fdc);
 747         return (error);
 748 }
 749
 750 /*
 751  * Add a child device to the fdc controller.  It will then be probed etc.
 752  */
 753 static void
 754 fdc_add_child(device_t dev, const char *name, int unit)
 755 {
 756         int     disabled;
 757         struct fdc_ivars *ivar;
 758         device_t child;
 759
 760         ivar = kmalloc(sizeof *ivar, M_DEVBUF /* XXX */, M_WAITOK | M_ZERO);
 761         if (resource_int_value(name, unit, "drive", &ivar->fdunit) != 0)
 762                 ivar->fdunit = 0;
 763         child = device_add_child(dev, name, unit);
 764         if (child == NULL)
 765                 return;
 766         device_set_ivars(child, ivar);
 767         if (resource_int_value(name, unit, "disabled", &disabled) == 0
 768             && disabled != 0)
 769                 device_disable(child);
 770 }
 771
 772 int
 773 fdc_attach(device_t dev)
 774 {
 775         struct  fdc_data *fdc;
 776         int     i, error;
 777
 778         fdc = device_get_softc(dev);
 779
 780         callout_init(&fdc->pseudointr_ch);
 781
 782         error = fdc_alloc_resources(fdc);
 783         if (error) {
 784                 device_printf(dev, "cannot reacquire resources\n");
 785                 return error;
 786         }
 787         error = BUS_SETUP_INTR(device_get_parent(dev), dev, fdc->res_irq,
 788                                0, fdc_intr, fdc,
 789                                &fdc->fdc_intr, NULL);
 790         if (error) {
 791                 device_printf(dev, "cannot setup interrupt\n");
 792                 return error;
 793         }
 794         fdc->fdcu = device_get_unit(dev);
 795         fdc->flags |= FDC_ATTACHED;
 796
 797         if ((fdc->flags & FDC_NODMA) == 0) {
 798                 /* Acquire the DMA channel forever, The driver will do the rest */
 799                                 /* XXX should integrate with rman */
 800                 isa_dma_acquire(fdc->dmachan);
 801                 isa_dmainit(fdc->dmachan, 128 << 3 /* XXX max secsize */);
 802         }
 803         fdc->state = DEVIDLE;
 804
 805         /* reset controller, turn motor off, clear fdout mirror reg */
 806         fdout_wr(fdc, ((fdc->fdout = 0)));
 807         bioq_init(&fdc->bio_queue);
 808
 809         /*
 810          * Probe and attach any children.  We should probably detect
 811          * devices from the BIOS unless overridden.
 812          */
 813         for (i = resource_query_string(-1, "at", device_get_nameunit(dev));
 814              i != -1;
 815              i = resource_query_string(i, "at", device_get_nameunit(dev)))
 816                 fdc_add_child(dev, resource_query_name(i),
 817                                resource_query_unit(i));
 818
 819         return (bus_generic_attach(dev));
 820 }
 821
 822 int
 823 fdc_print_child(device_t me, device_t child)
 824 {
 825         int retval = 0;
 826
 827         retval += bus_print_child_header(me, child);
 828         retval += kprintf(" on %s drive %d\n", device_get_nameunit(me),
 829                fdc_get_fdunit(child));
 830
 831         return (retval);
 832 }
 833
 834 static device_method_t fdc_methods[] = {
 835         /* Device interface */
 836         DEVMETHOD(device_probe,         fdc_probe),
 837         DEVMETHOD(device_attach,        fdc_attach),
 838         DEVMETHOD(device_detach,        bus_generic_detach),
 839         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
 840         DEVMETHOD(device_suspend,       bus_generic_suspend),
 841         DEVMETHOD(device_resume,        bus_generic_resume),
 842
 843         /* Bus interface */
 844         DEVMETHOD(bus_print_child,      fdc_print_child),
 845         DEVMETHOD(bus_read_ivar,        fdc_read_ivar),
 846         /* Our children never use any other bus interface methods. */
 847
 848         { 0, 0 }
 849 };
 850
 851 static driver_t fdc_driver = {
 852         "fdc",
 853         fdc_methods,
 854         sizeof(struct fdc_data)
 855 };
 856
 857 DRIVER_MODULE(fdc, isa, fdc_driver, fdc_devclass, 0, 0);
 858 DRIVER_MODULE(fdc, acpi, fdc_driver, fdc_devclass, 0, 0);
 859
 860 /******************************************************************/
 861 /*
 862  * devices attached to the controller section.
 863  */
 864 static int
 865 fd_probe(device_t dev)
 866 {
 867         int     i;
 868         u_int   fdt, st0, st3;
 869         struct  fd_data *fd;
 870         struct  fdc_data *fdc;
 871         fdsu_t  fdsu;
 872         static int fd_fifo = 0;
 873
 874         fdsu = *(int *)device_get_ivars(dev); /* xxx cheat a bit... */
 875         fd = device_get_softc(dev);
 876         fdc = device_get_softc(device_get_parent(dev));
 877
 878         bzero(fd, sizeof *fd);
 879         fd->dev = dev;
 880         fd->fdc = fdc;
 881         fd->fdsu = fdsu;
 882         fd->fdu = device_get_unit(dev);
 883
 884 #ifdef __i386__
 885         /* look up what bios thinks we have */
 886         switch (fd->fdu) {
 887         case 0:
 888                 if ((fdc->flags & FDC_ISPCMCIA))
 889                         fdt = RTCFDT_144M;
 890                 else if (device_get_flags(fdc->fdc_dev) & FDC_PRETEND_D0)
 891                         fdt = RTCFDT_144M | RTCFDT_144M_PRETENDED;
 892                 else
 893                         fdt = (rtcin(RTC_FDISKETTE) & 0xf0);
 894                 break;
 895         case 1:
 896                 fdt = ((rtcin(RTC_FDISKETTE) << 4) & 0xf0);
 897                 break;
 898         default:
 899                 fdt = RTCFDT_NONE;
 900                 break;
 901         }
 902 #else
 903         fdt = RTCFDT_144M;      /* XXX probably */
 904 #endif
 905
 906         /* is there a unit? */
 907         if (fdt == RTCFDT_NONE)
 908                 return (ENXIO);
 909
 910         /* select it */
 911         set_motor(fdc, fdsu, TURNON);
 912         DELAY(1000000); /* 1 sec */
 913
 914         /* XXX This doesn't work before the first set_motor() */
 915         if (fd_fifo == 0 && fdc->fdct != FDC_NE765 && fdc->fdct != FDC_UNKNOWN
 916             && (device_get_flags(fdc->fdc_dev) & FDC_NO_FIFO) == 0
 917             && enable_fifo(fdc) == 0) {
 918                 device_printf(device_get_parent(dev),
 919                     "FIFO enabled, %d bytes threshold\n", fifo_threshold);
 920         }
 921         fd_fifo = 1;
 922
 923         if ((fd_cmd(fdc, 2, NE7CMD_SENSED, fdsu, 1, &st3) == 0)
 924             && (st3 & NE7_ST3_T0)) {
 925                 /* if at track 0, first seek inwards */
 926                 /* seek some steps: */
 927                 fd_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0);
 928                 DELAY(300000); /* ...wait a moment... */
 929                 fd_sense_int(fdc, 0, 0); /* make ctrlr happy */
 930         }
 931
 932         /* If we're at track 0 first seek inwards. */
 933         if ((fd_sense_drive_status(fdc, &st3) == 0) && (st3 & NE7_ST3_T0)) {
 934                 /* Seek some steps... */
 935                 if (fd_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) {
 936                         /* ...wait a moment... */
 937                         DELAY(300000);
 938                         /* make ctrlr happy: */
 939                         fd_sense_int(fdc, 0, 0);
 940                 }
 941         }
 942
 943         for (i = 0; i < 2; i++) {
 944                 /*
 945                  * we must recalibrate twice, just in case the
 946                  * heads have been beyond cylinder 76, since most
 947                  * FDCs still barf when attempting to recalibrate
 948                  * more than 77 steps
 949                  */
 950                 /* go back to 0: */
 951                 if (fd_cmd(fdc, 2, NE7CMD_RECAL, fdsu, 0) == 0) {
 952                         /* a second being enough for full stroke seek*/
 953                         DELAY(i == 0 ? 1000000 : 300000);
 954
 955                         /* anything responding? */
 956                         if (fd_sense_int(fdc, &st0, 0) == 0 &&
 957                             (st0 & NE7_ST0_EC) == 0)
 958                                 break; /* already probed succesfully */
 959                 }
 960         }
 961
 962         set_motor(fdc, fdsu, TURNOFF);
 963
 964         if (st0 & NE7_ST0_EC) /* no track 0 -> no drive present */
 965                 return (ENXIO);
 966
 967         fd->track = FD_NO_TRACK;
 968         fd->fdc = fdc;
 969         fd->fdsu = fdsu;
 970         fd->options = 0;
 971         callout_init(&fd->toffhandle);
 972         callout_init(&fd->tohandle);
 973         callout_init(&fd->motor);
 974
 975         switch (fdt) {
 976         case RTCFDT_12M:
 977                 device_set_desc(dev, "1200-KB 5.25\" drive");
 978                 fd->type = FD_1200;
 979                 break;
 980         case RTCFDT_144M | RTCFDT_144M_PRETENDED:
 981                 device_set_desc(dev, "config-pretended 1440-MB 3.5\" drive");
 982                 fd->type = FD_1440;
 983                 break;
 984         case RTCFDT_144M:
 985                 device_set_desc(dev, "1440-KB 3.5\" drive");
 986                 fd->type = FD_1440;
 987                 break;
 988         case RTCFDT_288M:
 989         case RTCFDT_288M_1:
 990                 device_set_desc(dev, "2880-KB 3.5\" drive (in 1440-KB mode)");
 991                 fd->type = FD_1440;
 992                 break;
 993         case RTCFDT_360K:
 994                 device_set_desc(dev, "360-KB 5.25\" drive");
 995                 fd->type = FD_360;
 996                 break;
 997         case RTCFDT_720K:
 998                 kprintf("720-KB 3.5\" drive");
 999                 fd->type = FD_720;
1000                 break;
1001         default:
1002                 return (ENXIO);
1003         }
1004         fd->ft = fd_types[fd->type - 1];
1005         return (0);
1006 }
1007
1008 static int
1009 fd_attach(device_t dev)
1010 {
1011         struct  fd_data *fd;
1012
1013         fd = device_get_softc(dev);
1014
1015         disk_create(fd->fdu, &fd->disk, &fd_ops);
1016
1017         /*
1018          * Make special raw floppy devices with preset types to
1019          * make formatting easier.  These override the disk management
1020          * layer for the whole-slice-disk for partitions 128-191.  Note
1021          * that we do not override partition 255, which is the
1022          * whole-slice-part.  If we did we would have to provide our
1023          * own DIOCGPART ioctl.
1024          */
1025         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 1),
1026                  UID_ROOT, GID_WHEEL, 0600, "fd%d.1720", fd->fdu);
1027         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 2),
1028                  UID_ROOT, GID_WHEEL, 0600, "fd%d.1480", fd->fdu);
1029         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 3),
1030                  UID_ROOT, GID_WHEEL, 0600, "fd%d.1440", fd->fdu);
1031         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 4),
1032                  UID_ROOT, GID_WHEEL, 0600, "fd%d.1200", fd->fdu);
1033         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 5),
1034                  UID_ROOT, GID_WHEEL, 0600, "fd%d.820", fd->fdu);
1035         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 6),
1036                  UID_ROOT, GID_WHEEL, 0600, "fd%d.800", fd->fdu);
1037         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 7),
1038                  UID_ROOT, GID_WHEEL, 0600, "fd%d.720", fd->fdu);
1039         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 8),
1040                  UID_ROOT, GID_WHEEL, 0600, "fd%d.360", fd->fdu);
1041         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 9),
1042                  UID_ROOT, GID_WHEEL, 0600, "fd%d.640", fd->fdu);
1043         make_dev(&fd_ops, dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128 + 10),
1044                  UID_ROOT, GID_WHEEL, 0600, "fd%d.1232", fd->fdu);
1045
1046         devstat_add_entry(&fd->device_stats, device_get_name(dev),
1047                           device_get_unit(dev), 512, DEVSTAT_NO_ORDERED_TAGS,
1048                           DEVSTAT_TYPE_FLOPPY | DEVSTAT_TYPE_IF_OTHER,
1049                           DEVSTAT_PRIORITY_FD);
1050         return (0);
1051 }
1052
1053 static int
1054 fd_detach(device_t dev)
1055 {
1056         struct  fd_data *fd;
1057
1058         fd = device_get_softc(dev);
1059         kprintf("devfs: Please make sure that only the right fd device was removed!!!\n");
1060         dev_ops_remove_minor(&fd_ops,
1061                          /*dkunitmask() | dkmakeslice(-1) | dkmakepart(128|64),*/
1062                          dkmakeminor(fd->fdu, WHOLE_DISK_SLICE, 128));
1063         disk_invalidate(&fd->disk);
1064         disk_destroy(&fd->disk);
1065         devstat_remove_entry(&fd->device_stats);
1066         callout_stop(&fd->toffhandle);
1067         callout_stop(&fd->motor);
1068
1069         return (0);
1070 }
1071
1072 static device_method_t fd_methods[] = {
1073         /* Device interface */
1074         DEVMETHOD(device_probe,         fd_probe),
1075         DEVMETHOD(device_attach,        fd_attach),
1076         DEVMETHOD(device_detach,        fd_detach),
1077         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
1078         DEVMETHOD(device_suspend,       bus_generic_suspend), /* XXX */
1079         DEVMETHOD(device_resume,        bus_generic_resume), /* XXX */
1080
1081         { 0, 0 }
1082 };
1083
1084 static driver_t fd_driver = {
1085         "fd",
1086         fd_methods,
1087         sizeof(struct fd_data)
1088 };
1089
1090 DRIVER_MODULE(fd, fdc, fd_driver, fd_devclass, 0, 0);
1091
1092 /****************************************************************************/
1093 /*                            motor control stuff                           */
1094 /*              remember to not deselect the drive we're working on         */
1095 /****************************************************************************/
1096 static void
1097 set_motor(struct fdc_data *fdc, int fdsu, int turnon)
1098 {
1099         int fdout = fdc->fdout;
1100         int needspecify = 0;
1101
1102         if(turnon) {
1103                 fdout &= ~FDO_FDSEL;
1104                 fdout |= (FDO_MOEN0 << fdsu) + fdsu;
1105         } else
1106                 fdout &= ~(FDO_MOEN0 << fdsu);
1107
1108         if(!turnon
1109            && (fdout & (FDO_MOEN0+FDO_MOEN1+FDO_MOEN2+FDO_MOEN3)) == 0)
1110                 /* gonna turn off the last drive, put FDC to bed */
1111                 fdout &= ~ (FDO_FRST|FDO_FDMAEN);
1112         else {
1113                 /* make sure controller is selected and specified */
1114                 if((fdout & (FDO_FRST|FDO_FDMAEN)) == 0)
1115                         needspecify = 1;
1116                 fdout |= (FDO_FRST|FDO_FDMAEN);
1117         }
1118
1119         fdout_wr(fdc, fdout);
1120         fdc->fdout = fdout;
1121         TRACE1("[0x%x->FDOUT]", fdout);
1122
1123         if (needspecify) {
1124                 /*
1125                  * XXX
1126                  * special case: since we have just woken up the FDC
1127                  * from its sleep, we silently assume the command will
1128                  * be accepted, and do not test for a timeout
1129                  */
1130                 (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY,
1131                              NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
1132                              0);
1133                 if (fdc->flags & FDC_HAS_FIFO)
1134                         (void) enable_fifo(fdc);
1135         }
1136 }
1137
1138 static void
1139 fd_turnoff(void *xfd)
1140 {
1141         fd_p fd = xfd;
1142
1143         TRACE1("[fd%d: turnoff]", fd->fdu);
1144
1145         crit_enter();
1146         /*
1147          * Don't turn off the motor yet if the drive is active.
1148          *
1149          * If we got here, this could only mean we missed an interrupt.
1150          * This can e. g. happen on the Y-E Date PCMCIA floppy controller
1151          * after a controller reset.  Just schedule a pseudo-interrupt
1152          * so the state machine gets re-entered.
1153          */
1154         if (fd->fdc->state != DEVIDLE && fd->fdc->fdu == fd->fdu) {
1155                 fdc_intr(fd->fdc);
1156                 crit_exit();
1157                 return;
1158         }
1159
1160         fd->flags &= ~FD_MOTOR;
1161         set_motor(fd->fdc, fd->fdsu, TURNOFF);
1162         crit_exit();
1163 }
1164
1165 static void
1166 fd_motor_on(void *xfd)
1167 {
1168         fd_p fd = xfd;
1169
1170         crit_enter();
1171         fd->flags &= ~FD_MOTOR_WAIT;
1172         if((fd->fdc->fd == fd) && (fd->fdc->state == MOTORWAIT))
1173         {
1174                 fdc_intr(fd->fdc);
1175         }
1176         crit_exit();
1177 }
1178
1179 static void
1180 fd_turnon(fd_p fd)
1181 {
1182         if(!(fd->flags & FD_MOTOR))
1183         {
1184                 fd->flags |= (FD_MOTOR + FD_MOTOR_WAIT);
1185                 set_motor(fd->fdc, fd->fdsu, TURNON);
1186                 callout_reset(&fd->motor, hz, fd_motor_on, fd);
1187         }
1188 }
1189
1190 static void
1191 fdc_reset(fdc_p fdc)
1192 {
1193         /* Try a reset, keep motor on */
1194         fdout_wr(fdc, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
1195         TRACE1("[0x%x->FDOUT]", fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
1196         DELAY(100);
1197         /* enable FDC, but defer interrupts a moment */
1198         fdout_wr(fdc, fdc->fdout & ~FDO_FDMAEN);
1199         TRACE1("[0x%x->FDOUT]", fdc->fdout & ~FDO_FDMAEN);
1200         DELAY(100);
1201         fdout_wr(fdc, fdc->fdout);
1202         TRACE1("[0x%x->FDOUT]", fdc->fdout);
1203
1204         /* XXX after a reset, silently believe the FDC will accept commands */
1205         (void)fd_cmd(fdc, 3, NE7CMD_SPECIFY,
1206                      NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
1207                      0);
1208         if (fdc->flags & FDC_HAS_FIFO)
1209                 (void) enable_fifo(fdc);
1210 }
1211
1212 /****************************************************************************/
1213 /*                             fdc in/out                                   */
1214 /****************************************************************************/
1215 /*
1216  * FDC IO functions, take care of the main status register, timeout
1217  * in case the desired status bits are never set.
1218  *
1219  * These PIO loops initially start out with short delays between
1220  * each iteration in the expectation that the required condition
1221  * is usually met quickly, so it can be handled immediately.  After
1222  * about 1 ms, stepping is increased to achieve a better timing
1223  * accuracy in the calls to DELAY().
1224  */
1225 static int
1226 fd_in(struct fdc_data *fdc, int *ptr)
1227 {
1228         int i, j, step;
1229
1230         for (j = 0, step = 1;
1231             (i = fdsts_rd(fdc) & (NE7_DIO|NE7_RQM)) != (NE7_DIO|NE7_RQM) &&
1232             j < FDSTS_TIMEOUT;
1233             j += step) {
1234                 if (i == NE7_RQM)
1235                         return (fdc_err(fdc, "ready for output in input\n"));
1236                 if (j == 1000)
1237                         step = 1000;
1238                 DELAY(step);
1239         }
1240         if (j >= FDSTS_TIMEOUT)
1241                 return (fdc_err(fdc, bootverbose? "input ready timeout\n": 0));
1242 #ifdef  FDC_DEBUG
1243         i = fddata_rd(fdc);
1244         TRACE1("[FDDATA->0x%x]", (unsigned char)i);
1245         *ptr = i;
1246         return (0);
1247 #else   /* !FDC_DEBUG */
1248         i = fddata_rd(fdc);
1249         if (ptr)
1250                 *ptr = i;
1251         return (0);
1252 #endif  /* FDC_DEBUG */
1253 }
1254
1255 static int
1256 out_fdc(struct fdc_data *fdc, int x)
1257 {
1258         int i, j, step;
1259
1260         for (j = 0, step = 1;
1261             (i = fdsts_rd(fdc) & (NE7_DIO|NE7_RQM)) != NE7_RQM &&
1262             j < FDSTS_TIMEOUT;
1263             j += step) {
1264                 if (i == (NE7_DIO|NE7_RQM))
1265                         return (fdc_err(fdc, "ready for input in output\n"));
1266                 if (j == 1000)
1267                         step = 1000;
1268                 DELAY(step);
1269         }
1270         if (j >= FDSTS_TIMEOUT)
1271                 return (fdc_err(fdc, bootverbose? "output ready timeout\n": 0));
1272
1273         /* Send the command and return */
1274         fddata_wr(fdc, x);
1275         TRACE1("[0x%x->FDDATA]", x);
1276         return (0);
1277 }
1278
1279 /****************************************************************************/
1280 /*                           fdopen/fdclose                                 */
1281 /****************************************************************************/
1282 int
1283 Fdopen(struct dev_open_args *ap)
1284 {
1285         cdev_t dev = ap->a_head.a_dev;
1286         fdu_t fdu = dkunit(dev);
1287         struct disk_info info;
1288         struct fd_type *ft;
1289         int     type;
1290         int     changetype;
1291         fd_p    fd;
1292         fdc_p   fdc;
1293
1294         /* check bounds */
1295         if ((fd = devclass_get_softc(fd_devclass, fdu)) == 0)
1296                 return (ENXIO);
1297         fdc = fd->fdc;
1298         if ((fdc == NULL) || (fd->type == NO_TYPE))
1299                 return (ENXIO);
1300
1301         /*
1302          * Figure out the type of floppy.  There are special whole-disk-device
1303          * overrides that will override the current type.
1304          */
1305         type = dkpart(dev);
1306         if (type == WHOLE_SLICE_PART) {
1307                 type = fd->type;        /* do not change selected type data */
1308                 changetype = 0;
1309         } else if (type > 128) {
1310                 type -= 128;            /* set to specific format */
1311                 changetype = 1;
1312         } else {
1313                 type = fd->type;        /* reset to default */
1314                 changetype = 1;
1315         }
1316         if (type > NUMDENS)
1317                 return (ENXIO);
1318         if (type != fd->type) {
1319                 /*
1320                  * For each type of basic drive, make sure we are trying
1321                  * to open a type it can do,
1322                  */
1323                 switch (fd->type) {
1324                 case FD_360:
1325                         return (ENXIO);
1326                 case FD_720:
1327                         if (   type != FD_820
1328                             && type != FD_800
1329                             && type != FD_640
1330                            )
1331                                 return (ENXIO);
1332                         break;
1333                 case FD_1200:
1334                         switch (type) {
1335                         case FD_1480:
1336                                 type = FD_1480in5_25;
1337                                 break;
1338                         case FD_1440:
1339                                 type = FD_1440in5_25;
1340                                 break;
1341                         case FD_1232:
1342                                 break;
1343                         case FD_820:
1344                                 type = FD_820in5_25;
1345                                 break;
1346                         case FD_800:
1347                                 type = FD_800in5_25;
1348                                 break;
1349                         case FD_720:
1350                                 type = FD_720in5_25;
1351                                 break;
1352                         case FD_640:
1353                                 type = FD_640in5_25;
1354                                 break;
1355                         case FD_360:
1356                                 type = FD_360in5_25;
1357                                 break;
1358                         default:
1359                                 return(ENXIO);
1360                         }
1361                         break;
1362                 case FD_1440:
1363                         if (   type != FD_1720
1364                             && type != FD_1480
1365                             && type != FD_1200
1366                             && type != FD_820
1367                             && type != FD_800
1368                             && type != FD_720
1369                             && type != FD_640
1370                             )
1371                                 return(ENXIO);
1372                         break;
1373                 }
1374         }
1375
1376         /*
1377          * fd->type is the basic drive type, not the current format
1378          * we are reading.  We only change the type when opening the
1379          * whole-slice-partition
1380          */
1381         if (changetype)
1382                 fd->ft = fd_types[type - 1];
1383         fd->flags |= FD_OPEN;
1384
1385         /*
1386          * Clearing the DMA overrun counter at open time is a bit messy.
1387          * Since we're only managing one counter per controller, opening
1388          * the second drive could mess it up.  Anyway, if the DMA overrun
1389          * condition is really persistent, it will eventually time out
1390          * still.  OTOH, clearing it here will ensure we'll at least start
1391          * trying again after a previous (maybe even long ago) failure.
1392          * Also, this is merely a stop-gap measure only that should not
1393          * happen during normal operation, so we can tolerate it to be a
1394          * bit sloppy about this.
1395          */
1396         fdc->dma_overruns = 0;
1397
1398         /*
1399          * Set disk parameters for the disk management layer.
1400          *
1401          * Note that we do not set RAWEXTENSIONS here.  We override
1402          * the minor numbers in the raw-extension range and handle them
1403          * directly.
1404          */
1405         bzero(&info, sizeof(info));
1406         ft = &fd->ft;
1407         info.d_media_blksize = 128 << ft->secsize;
1408         info.d_media_blocks = ft->size;
1409         info.d_dsflags = DSO_COMPATPARTA | DSO_COMPATMBR;
1410         info.d_nheads = ft->heads;
1411         info.d_secpertrack = ft->sectrac;
1412         info.d_secpercyl = ft->sectrac * ft->heads;
1413         info.d_ncylinders = ft->size / info.d_secpercyl;
1414         disk_setdiskinfo(&fd->disk, &info);
1415
1416         return 0;
1417 }
1418
1419 int
1420 fdclose(struct dev_close_args *ap)
1421 {
1422         cdev_t dev = ap->a_head.a_dev;
1423         fdu_t fdu = dkunit(dev);
1424         struct fd_data *fd;
1425
1426         fd = devclass_get_softc(fd_devclass, fdu);
1427         fd->flags &= ~FD_OPEN;
1428         fd->options &= ~(FDOPT_NORETRY | FDOPT_NOERRLOG);
1429
1430         return (0);
1431 }
1432
1433 /****************************************************************************/
1434 /*                               fdstrategy                                 */
1435 /****************************************************************************/
1436 int
1437 fdstrategy(struct dev_strategy_args *ap)
1438 {
1439         cdev_t dev = ap->a_head.a_dev;
1440         struct bio *bio = ap->a_bio;
1441         struct buf *bp = bio->bio_buf;
1442         unsigned nblocks, blknum, cando;
1443         fdu_t   fdu;
1444         fdc_p   fdc;
1445         fd_p    fd;
1446         size_t  fdblk;
1447
1448         fdu = dkunit(dev);
1449         fd = devclass_get_softc(fd_devclass, fdu);
1450         if (fd == 0)
1451                 panic("fdstrategy: buf for nonexistent device (%#lx, %#lx)",
1452                       (u_long)major(dev), (u_long)minor(dev));
1453         fdc = fd->fdc;
1454         if (fd->type == NO_TYPE) {
1455                 bp->b_error = ENXIO;
1456                 bp->b_flags |= B_ERROR;
1457                 goto bad;
1458         };
1459
1460         fdblk = 128 << (fd->ft.secsize);
1461         if (bp->b_cmd != BUF_CMD_FORMAT) {
1462                 if (bio->bio_offset < 0) {
1463                         kprintf(
1464                 "fd%d: fdstrat: bad request offset = %lld, bcount = %d\n",
1465                                fdu, bio->bio_offset, bp->b_bcount);
1466                         bp->b_error = EINVAL;
1467                         bp->b_flags |= B_ERROR;
1468                         goto bad;
1469                 }
1470                 if ((bp->b_bcount % fdblk) != 0) {
1471                         bp->b_error = EINVAL;
1472                         bp->b_flags |= B_ERROR;
1473                         goto bad;
1474                 }
1475         }
1476
1477         /*
1478          * Set up block calculations.
1479          */
1480         if (bio->bio_offset > 20000000LL * fdblk) {
1481                 /*
1482                  * Reject unreasonably high block number, prevent the
1483                  * multiplication below from overflowing.
1484                  */
1485                 bp->b_error = EINVAL;
1486                 bp->b_flags |= B_ERROR;
1487                 goto bad;
1488         }
1489         blknum = (unsigned)(bio->bio_offset / fdblk);
1490         nblocks = fd->ft.size;
1491         bp->b_resid = 0;
1492         if (blknum + (bp->b_bcount / fdblk) > nblocks) {
1493                 if (blknum <= nblocks) {
1494                         cando = (nblocks - blknum) * fdblk;
1495                         bp->b_resid = bp->b_bcount - cando;
1496                         if (cando == 0)
1497                                 goto bad;       /* not actually bad but EOF */
1498                 } else {
1499                         bp->b_error = EINVAL;
1500                         bp->b_flags |= B_ERROR;
1501                         goto bad;
1502                 }
1503         }
1504         crit_enter();
1505         bio->bio_driver_info = dev;
1506         bioqdisksort(&fdc->bio_queue, bio);
1507         callout_stop(&fd->toffhandle);
1508
1509         /* Tell devstat we are starting on the transaction */
1510         devstat_start_transaction(&fd->device_stats);
1511         device_busy(fd->dev);
1512
1513         fdstart(fdc);
1514         crit_exit();
1515         return(0);
1516
1517 bad:
1518         biodone(bio);
1519         return(0);
1520 }
1521
1522 /***************************************************************\
1523 *                               fdstart                         *
1524 * We have just queued something.. if the controller is not busy *
1525 * then simulate the case where it has just finished a command   *
1526 * So that it (the interrupt routine) looks on the queue for more*
1527 * work to do and picks up what we just added.                   *
1528 * If the controller is already busy, we need do nothing, as it  *
1529 * will pick up our work when the present work completes         *
1530 \***************************************************************/
1531 static void
1532 fdstart(struct fdc_data *fdc)
1533 {
1534         crit_enter();
1535         if(fdc->state == DEVIDLE)
1536         {
1537                 fdc_intr(fdc);
1538         }
1539         crit_exit();
1540 }
1541
1542 static void
1543 fd_iotimeout(void *xfdc)
1544 {
1545         fdc_p fdc;
1546
1547         fdc = xfdc;
1548         TRACE1("fd%d[fd_iotimeout()]", fdc->fdu);
1549
1550         /*
1551          * Due to IBM's brain-dead design, the FDC has a faked ready
1552          * signal, hardwired to ready == true. Thus, any command
1553          * issued if there's no diskette in the drive will _never_
1554          * complete, and must be aborted by resetting the FDC.
1555          * Many thanks, Big Blue!
1556          * The FDC must not be reset directly, since that would
1557          * interfere with the state machine.  Instead, pretend that
1558          * the command completed but was invalid.  The state machine
1559          * will reset the FDC and retry once.
1560          */
1561         crit_enter();
1562         fdc->status[0] = NE7_ST0_IC_IV;
1563         fdc->flags &= ~FDC_STAT_VALID;
1564         fdc->state = IOTIMEDOUT;
1565         fdc_intr(fdc);
1566         crit_exit();
1567 }
1568
1569 /* just ensure it is running in a critical section */
1570 static void
1571 fd_pseudointr(void *xfdc)
1572 {
1573         crit_enter();
1574         fdc_intr(xfdc);
1575         crit_exit();
1576 }
1577
1578 /***********************************************************************\
1579 *                                 fdintr                                *
1580 * keep calling the state machine until it returns a 0                   *
1581 * ALWAYS called at SPLBIO                                               *
1582 \***********************************************************************/
1583 static void
1584 fdc_intr(void *xfdc)
1585 {
1586         fdc_p fdc = xfdc;
1587         while(fdstate(fdc))
1588                 ;
1589 }
1590
1591 /*
1592  * magic pseudo-DMA initialization for YE FDC. Sets count and
1593  * direction
1594  */
1595 #define SET_BCDR(fdc,wr,cnt,port) \
1596         bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port,  \
1597             ((cnt)-1) & 0xff);                                           \
1598         bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port + 1, \
1599             ((wr ? 0x80 : 0) | ((((cnt)-1) >> 8) & 0x7f)));
1600
1601 /*
1602  * fdcpio(): perform programmed IO read/write for YE PCMCIA floppy
1603  */
1604 static int fdcpio(fdc_p fdc, buf_cmd_t cmd, caddr_t addr, u_int count)
1605 {
1606         u_char *cptr = (u_char *)addr;
1607
1608         if (cmd == BUF_CMD_READ) {
1609                 if (fdc->state != PIOREAD) {
1610                         fdc->state = PIOREAD;
1611                         return(0);
1612                 };
1613                 SET_BCDR(fdc, 0, count, 0);
1614                 bus_space_read_multi_1(fdc->portt, fdc->porth, fdc->port_off +
1615                     FDC_YE_DATAPORT, cptr, count);
1616         } else {
1617                 bus_space_write_multi_1(fdc->portt, fdc->porth, fdc->port_off +
1618                     FDC_YE_DATAPORT, cptr, count);
1619                 SET_BCDR(fdc, 0, count, 0);
1620         };
1621         return(1);
1622 }
1623
1624 /***********************************************************************\
1625 * The controller state machine.                                         *
1626 * if it returns a non zero value, it should be called again immediatly  *
1627 \***********************************************************************/
1628 static int
1629 fdstate(fdc_p fdc)
1630 {
1631         int read, format, head, i, sec = 0, sectrac, st0, cyl, st3;
1632         unsigned blknum = 0, b_cylinder = 0;
1633         fdu_t fdu;
1634         fd_p fd;
1635         struct bio *bio;
1636         struct buf *bp;
1637         struct fd_formb *finfo = NULL;
1638         size_t fdblk;
1639         cdev_t dev;
1640
1641         bio = fdc->bio;
1642         if (bio == NULL) {
1643                 bio = bioq_first(&fdc->bio_queue);
1644                 if (bio != NULL) {
1645                         bioq_remove(&fdc->bio_queue, bio);
1646                         fdc->bio = bio;
1647                 }
1648         }
1649         if (bio == NULL) {
1650                 /***********************************************\
1651                 * nothing left for this controller to do        *
1652                 * Force into the IDLE state,                    *
1653                 \***********************************************/
1654                 fdc->state = DEVIDLE;
1655                 if (fdc->fd) {
1656                         device_printf(fdc->fdc_dev,
1657                             "unexpected valid fd pointer\n");
1658                         fdc->fd = (fd_p) 0;
1659                         fdc->fdu = -1;
1660                 }
1661                 TRACE1("[fdc%d IDLE]", fdc->fdcu);
1662                 return (0);
1663         }
1664         bp = bio->bio_buf;
1665         dev = bio->bio_driver_info;
1666
1667         fdu = dkunit(dev);
1668         fd = devclass_get_softc(fd_devclass, fdu);
1669         fdblk = 128 << fd->ft.secsize;
1670         if (fdc->fd && (fd != fdc->fd))
1671                 device_printf(fd->dev, "confused fd pointers\n");
1672         read = (bp->b_cmd == BUF_CMD_READ);
1673         format = (bp->b_cmd == BUF_CMD_FORMAT);
1674         if (format) {
1675                 finfo = (struct fd_formb *)bp->b_data;
1676                 fd->skip = (char *)&(finfo->fd_formb_cylno(0))
1677                         - (char *)finfo;
1678         }
1679         if (fdc->state == DOSEEK || fdc->state == SEEKCOMPLETE) {
1680                 blknum = (unsigned)(bio->bio_offset / fdblk) +
1681                          fd->skip  /fdblk;
1682                 b_cylinder = blknum / (fd->ft.sectrac * fd->ft.heads);
1683         }
1684         TRACE1("fd%d", fdu);
1685         TRACE1("[%s]", fdstates[fdc->state]);
1686         TRACE1("(0x%x)", fd->flags);
1687         callout_reset(&fd->toffhandle, 4 * hz, fd_turnoff, fd);
1688         switch (fdc->state)
1689         {
1690         case DEVIDLE:
1691         case FINDWORK:  /* we have found new work */
1692                 fdc->retry = 0;
1693                 fd->skip = 0;
1694                 fdc->fd = fd;
1695                 fdc->fdu = fdu;
1696                 fdc->fdctl_wr(fdc, fd->ft.trans);
1697                 TRACE1("[0x%x->FDCTL]", fd->ft.trans);
1698                 /*******************************************************\
1699                 * If the next drive has a motor startup pending, then   *
1700                 * it will start up in its own good time         *
1701                 \*******************************************************/
1702                 if(fd->flags & FD_MOTOR_WAIT) {
1703                         fdc->state = MOTORWAIT;
1704                         return (0); /* come back later */
1705                 }
1706                 /*******************************************************\
1707                 * Maybe if it's not starting, it SHOULD be starting     *
1708                 \*******************************************************/
1709                 if (!(fd->flags & FD_MOTOR))
1710                 {
1711                         fdc->state = MOTORWAIT;
1712                         fd_turnon(fd);
1713                         return (0);
1714                 }
1715                 else    /* at least make sure we are selected */
1716                 {
1717                         set_motor(fdc, fd->fdsu, TURNON);
1718                 }
1719                 if (fdc->flags & FDC_NEEDS_RESET) {
1720                         fdc->state = RESETCTLR;
1721                         fdc->flags &= ~FDC_NEEDS_RESET;
1722                 } else
1723                         fdc->state = DOSEEK;
1724                 break;
1725         case DOSEEK:
1726                 if (b_cylinder == (unsigned)fd->track)
1727                 {
1728                         fdc->state = SEEKCOMPLETE;
1729                         break;
1730                 }
1731                 if (fd_cmd(fdc, 3, NE7CMD_SEEK,
1732                            fd->fdsu, b_cylinder * fd->ft.steptrac,
1733                            0))
1734                 {
1735                         /*
1736                          * seek command not accepted, looks like
1737                          * the FDC went off to the Saints...
1738                          */
1739                         fdc->retry = 6; /* try a reset */
1740                         return(retrier(fdc));
1741                 }
1742                 fd->track = FD_NO_TRACK;
1743                 fdc->state = SEEKWAIT;
1744                 return(0);      /* will return later */
1745         case SEEKWAIT:
1746                 /* allow heads to settle */
1747                 callout_reset(&fdc->pseudointr_ch, hz / 16,
1748                                fd_pseudointr, fdc);
1749                 fdc->state = SEEKCOMPLETE;
1750                 return(0);      /* will return later */
1751         case SEEKCOMPLETE : /* SEEK DONE, START DMA */
1752                 /* Make sure seek really happened*/
1753                 if(fd->track == FD_NO_TRACK) {
1754                         int descyl = b_cylinder * fd->ft.steptrac;
1755                         do {
1756                                 /*
1757                                  * This might be a "ready changed" interrupt,
1758                                  * which cannot really happen since the
1759                                  * RDY pin is hardwired to + 5 volts.  This
1760                                  * generally indicates a "bouncing" intr
1761                                  * line, so do one of the following:
1762                                  *
1763                                  * When running on an enhanced FDC that is
1764                                  * known to not go stuck after responding
1765                                  * with INVALID, fetch all interrupt states
1766                                  * until seeing either an INVALID or a
1767                                  * real interrupt condition.
1768                                  *
1769                                  * When running on a dumb old NE765, give
1770                                  * up immediately.  The controller will
1771                                  * provide up to four dummy RC interrupt
1772                                  * conditions right after reset (for the
1773                                  * corresponding four drives), so this is
1774                                  * our only chance to get notice that it
1775                                  * was not the FDC that caused the interrupt.
1776                                  */
1777                                 if (fd_sense_int(fdc, &st0, &cyl)
1778                                     == FD_NOT_VALID)
1779                                         return 0;
1780                                 if(fdc->fdct == FDC_NE765
1781                                    && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
1782                                         return 0; /* hope for a real intr */
1783                         } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
1784
1785                         if (0 == descyl) {
1786                                 int failed = 0;
1787                                 /*
1788                                  * seek to cyl 0 requested; make sure we are
1789                                  * really there
1790                                  */
1791                                 if (fd_sense_drive_status(fdc, &st3))
1792                                         failed = 1;
1793                                 if ((st3 & NE7_ST3_T0) == 0) {
1794                                         kprintf(
1795                 "fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n",
1796                                                fdu, st3, NE7_ST3BITS);
1797                                         failed = 1;
1798                                 }
1799
1800                                 if (failed) {
1801                                         if(fdc->retry < 3)
1802                                                 fdc->retry = 3;
1803                                         return (retrier(fdc));
1804                                 }
1805                         }
1806
1807                         if (cyl != descyl) {
1808                                 kprintf(
1809                 "fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n",
1810                                        fdu, descyl, cyl, st0);
1811                                 if (fdc->retry < 3)
1812                                         fdc->retry = 3;
1813                                 return (retrier(fdc));
1814                         }
1815                 }
1816
1817                 fd->track = b_cylinder;
1818                 if (!(fdc->flags & FDC_NODMA)) {
1819                         isa_dmastart(isa_dmabp(bp),
1820                                      bp->b_data+fd->skip,
1821                                 format ? bp->b_bcount : fdblk, fdc->dmachan);
1822                 }
1823                 sectrac = fd->ft.sectrac;
1824                 sec = blknum %  (sectrac * fd->ft.heads);
1825                 head = sec / sectrac;
1826                 sec = sec % sectrac + 1;
1827                 fd->hddrv = ((head&1)<<2)+fdu;
1828
1829                 if(format || !read)
1830                 {
1831                         /* make sure the drive is writable */
1832                         if(fd_sense_drive_status(fdc, &st3) != 0)
1833                         {
1834                                 /* stuck controller? */
1835                                 if (!(fdc->flags & FDC_NODMA))
1836                                         isa_dmadone(isa_dmabp(bp),
1837                                                     bp->b_data + fd->skip,
1838                                                     format ? bp->b_bcount : fdblk,
1839                                                     fdc->dmachan);
1840                                 fdc->retry = 6; /* reset the beast */
1841                                 return (retrier(fdc));
1842                         }
1843                         if(st3 & NE7_ST3_WP)
1844                         {
1845                                 /*
1846                                  * XXX YES! this is ugly.
1847                                  * in order to force the current operation
1848                                  * to fail, we will have to fake an FDC
1849                                  * error - all error handling is done
1850                                  * by the retrier()
1851                                  */
1852                                 fdc->status[0] = NE7_ST0_IC_AT;
1853                                 fdc->status[1] = NE7_ST1_NW;
1854                                 fdc->status[2] = 0;
1855                                 fdc->status[3] = fd->track;
1856                                 fdc->status[4] = head;
1857                                 fdc->status[5] = sec;
1858                                 fdc->retry = 8; /* break out immediately */
1859                                 fdc->state = IOTIMEDOUT; /* not really... */
1860                                 return (1);
1861                         }
1862                 }
1863
1864                 if (format) {
1865                         if (fdc->flags & FDC_NODMA) {
1866                                 /*
1867                                  * This seems to be necessary for
1868                                  * whatever obscure reason; if we omit
1869                                  * it, we end up filling the sector ID
1870                                  * fields of the newly formatted track
1871                                  * entirely with garbage, causing
1872                                  * `wrong cylinder' errors all over
1873                                  * the place when trying to read them
1874                                  * back.
1875                                  *
1876                                  * Umpf.
1877                                  */
1878                                 SET_BCDR(fdc, 1, bp->b_bcount, 0);
1879
1880                                 (void)fdcpio(fdc,bp->b_cmd,
1881                                         bp->b_data+fd->skip,
1882                                         bp->b_bcount);
1883
1884                         }
1885                         /* formatting */
1886                         if(fd_cmd(fdc, 6,  NE7CMD_FORMAT, head << 2 | fdu,
1887                                   finfo->fd_formb_secshift,
1888                                   finfo->fd_formb_nsecs,
1889                                   finfo->fd_formb_gaplen,
1890                                   finfo->fd_formb_fillbyte, 0)) {
1891                                 /* controller fell over */
1892                                 if (!(fdc->flags & FDC_NODMA))
1893                                         isa_dmadone(isa_dmabp(bp),
1894                                                     bp->b_data + fd->skip,
1895                                                     format ? bp->b_bcount : fdblk,
1896                                                     fdc->dmachan);
1897                                 fdc->retry = 6;
1898                                 return (retrier(fdc));
1899                         }
1900                 } else {
1901                         if (fdc->flags & FDC_NODMA) {
1902                                 /*
1903                                  * this seems to be necessary even when
1904                                  * reading data
1905                                  */
1906                                 SET_BCDR(fdc, 1, fdblk, 0);
1907
1908                                 /*
1909                                  * perform the write pseudo-DMA before
1910                                  * the WRITE command is sent
1911                                  */
1912                                 if (!read)
1913                                         (void)fdcpio(fdc,bp->b_cmd,
1914                                             bp->b_data+fd->skip,
1915                                             fdblk);
1916                         }
1917                         if (fd_cmd(fdc, 9,
1918                                    (read ? NE7CMD_READ : NE7CMD_WRITE),
1919                                    head << 2 | fdu,  /* head & unit */
1920                                    fd->track,        /* track */
1921                                    head,
1922                                    sec,              /* sector + 1 */
1923                                    fd->ft.secsize,   /* sector size */
1924                                    sectrac,          /* sectors/track */
1925                                    fd->ft.gap,       /* gap size */
1926                                    fd->ft.datalen,   /* data length */
1927                                    0)) {
1928                                 /* the beast is sleeping again */
1929                                 if (!(fdc->flags & FDC_NODMA))
1930                                         isa_dmadone(isa_dmabp(bp),
1931                                                     bp->b_data + fd->skip,
1932                                                     format ? bp->b_bcount : fdblk,
1933                                                     fdc->dmachan);
1934                                 fdc->retry = 6;
1935                                 return (retrier(fdc));
1936                         }
1937                 }
1938                 if (fdc->flags & FDC_NODMA)
1939                         /*
1940                          * if this is a read, then simply await interrupt
1941                          * before performing PIO
1942                          */
1943                         if (read && !fdcpio(fdc,bp->b_cmd,
1944                             bp->b_data+fd->skip,fdblk)) {
1945                                 callout_reset(&fd->tohandle, hz,
1946                                                 fd_iotimeout, fdc);
1947                                 return(0);      /* will return later */
1948                         };
1949
1950                 /*
1951                  * write (or format) operation will fall through and
1952                  * await completion interrupt
1953                  */
1954                 fdc->state = IOCOMPLETE;
1955                 callout_reset(&fd->tohandle, hz, fd_iotimeout, fdc);
1956                 return (0);     /* will return later */
1957         case PIOREAD:
1958                 /*
1959                  * actually perform the PIO read.  The IOCOMPLETE case
1960                  * removes the timeout for us.
1961                  */
1962                 (void)fdcpio(fdc,bp->b_cmd,bp->b_data+fd->skip,fdblk);
1963                 fdc->state = IOCOMPLETE;
1964                 /* FALLTHROUGH */
1965         case IOCOMPLETE: /* IO DONE, post-analyze */
1966                 callout_stop(&fd->tohandle);
1967
1968                 if (fd_read_status(fdc, fd->fdsu)) {
1969                         if (!(fdc->flags & FDC_NODMA)) {
1970                                 isa_dmadone(isa_dmabp(bp),
1971                                             bp->b_data + fd->skip,
1972                                             format ? bp->b_bcount : fdblk,
1973                                             fdc->dmachan);
1974                         }
1975                         if (fdc->retry < 6)
1976                                 fdc->retry = 6; /* force a reset */
1977                         return (retrier(fdc));
1978                 }
1979
1980                 fdc->state = IOTIMEDOUT;
1981
1982                 /* FALLTHROUGH */
1983
1984         case IOTIMEDOUT:
1985                 if (!(fdc->flags & FDC_NODMA)) {
1986                         isa_dmadone(isa_dmabp(bp),
1987                                     bp->b_data + fd->skip,
1988                                 format ? bp->b_bcount : fdblk, fdc->dmachan);
1989                 }
1990                 if (fdc->status[0] & NE7_ST0_IC) {
1991                         if ((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
1992                             && fdc->status[1] & NE7_ST1_OR) {
1993                                 /*
1994                                  * DMA overrun. Someone hogged the bus and
1995                                  * didn't release it in time for the next
1996                                  * FDC transfer.
1997                                  *
1998                                  * We normally restart this without bumping
1999                                  * the retry counter.  However, in case
2000                                  * something is seriously messed up (like
2001                                  * broken hardware), we rather limit the
2002                                  * number of retries so the IO operation
2003                                  * doesn't block indefinately.
2004                                  */
2005                                 if (fdc->dma_overruns++ < FDC_DMAOV_MAX) {
2006                                         fdc->state = SEEKCOMPLETE;
2007                                         return (1);
2008                                 } /* else fall through */
2009                         }
2010                         if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_IV
2011                                 && fdc->retry < 6)
2012                                 fdc->retry = 6; /* force a reset */
2013                         else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
2014                                 && fdc->status[2] & NE7_ST2_WC
2015                                 && fdc->retry < 3)
2016                                 fdc->retry = 3; /* force recalibrate */
2017                         return (retrier(fdc));
2018                 }
2019                 /* All OK */
2020                 /* Operation successful, retry DMA overruns again next time. */
2021                 fdc->dma_overruns = 0;
2022                 fd->skip += fdblk;
2023                 if (!format && fd->skip < bp->b_bcount - bp->b_resid) {
2024                         /* set up next transfer */
2025                         fdc->state = DOSEEK;
2026                 } else {
2027                         /* ALL DONE */
2028                         fd->skip = 0;
2029                         fdc->bio = NULL;
2030                         device_unbusy(fd->dev);
2031                         devstat_end_transaction_buf(&fd->device_stats, bp);
2032                         biodone(bio);
2033                         fdc->fd = (fd_p) 0;
2034                         fdc->fdu = -1;
2035                         fdc->state = FINDWORK;
2036                 }
2037                 return (1);
2038         case RESETCTLR:
2039                 fdc_reset(fdc);
2040                 fdc->retry++;
2041                 fdc->state = RESETCOMPLETE;
2042                 return (0);
2043         case RESETCOMPLETE:
2044                 /*
2045                  * Discard all the results from the reset so that they
2046                  * can't cause an unexpected interrupt later.
2047                  */
2048                 for (i = 0; i < 4; i++)
2049                         (void)fd_sense_int(fdc, &st0, &cyl);
2050                 fdc->state = STARTRECAL;
2051                 /* Fall through. */
2052         case STARTRECAL:
2053                 if(fd_cmd(fdc, 2, NE7CMD_RECAL, fdu, 0)) {
2054                         /* arrgl */
2055                         fdc->retry = 6;
2056                         return (retrier(fdc));
2057                 }
2058                 fdc->state = RECALWAIT;
2059                 return (0);     /* will return later */
2060         case RECALWAIT:
2061                 /* allow heads to settle */
2062                 callout_reset(&fdc->pseudointr_ch, hz / 8, fd_pseudointr, fdc);
2063                 fdc->state = RECALCOMPLETE;
2064                 return (0);     /* will return later */
2065         case RECALCOMPLETE:
2066                 do {
2067                         /*
2068                          * See SEEKCOMPLETE for a comment on this:
2069                          */
2070                         if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
2071                                 return 0;
2072                         if(fdc->fdct == FDC_NE765
2073                            && (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
2074                                 return 0; /* hope for a real intr */
2075                 } while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
2076                 if ((st0 & NE7_ST0_IC) != NE7_ST0_IC_NT || cyl != 0)
2077                 {
2078                         if(fdc->retry > 3)
2079                                 /*
2080                                  * a recalibrate from beyond cylinder 77
2081                                  * will "fail" due to the FDC limitations;
2082                                  * since people used to complain much about
2083                                  * the failure message, try not logging
2084                                  * this one if it seems to be the first
2085                                  * time in a line
2086                                  */
2087                                 kprintf("fd%d: recal failed ST0 %b cyl %d\n",
2088                                        fdu, st0, NE7_ST0BITS, cyl);
2089                         if(fdc->retry < 3) fdc->retry = 3;
2090                         return (retrier(fdc));
2091                 }
2092                 fd->track = 0;
2093                 /* Seek (probably) necessary */
2094                 fdc->state = DOSEEK;
2095                 return (1);     /* will return immediatly */
2096         case MOTORWAIT:
2097                 if(fd->flags & FD_MOTOR_WAIT)
2098                 {
2099                         return (0); /* time's not up yet */
2100                 }
2101                 if (fdc->flags & FDC_NEEDS_RESET) {
2102                         fdc->state = RESETCTLR;
2103                         fdc->flags &= ~FDC_NEEDS_RESET;
2104                 } else {
2105                         /*
2106                          * If all motors were off, then the controller was
2107                          * reset, so it has lost track of the current
2108                          * cylinder.  Recalibrate to handle this case.
2109                          * But first, discard the results of the reset.
2110                          */
2111                         fdc->state = RESETCOMPLETE;
2112                 }
2113                 return (1);     /* will return immediatly */
2114         default:
2115                 device_printf(fdc->fdc_dev, "unexpected FD int->");
2116                 if (fd_read_status(fdc, fd->fdsu) == 0)
2117                         kprintf("FDC status :%x %x %x %x %x %x %x   ",
2118                                fdc->status[0],
2119                                fdc->status[1],
2120                                fdc->status[2],
2121                                fdc->status[3],
2122                                fdc->status[4],
2123                                fdc->status[5],
2124                                fdc->status[6] );
2125                 else
2126                         kprintf("No status available   ");
2127                 if (fd_sense_int(fdc, &st0, &cyl) != 0)
2128                 {
2129                         kprintf("[controller is dead now]\n");
2130                         return (0);
2131                 }
2132                 kprintf("ST0 = %x, PCN = %x\n", st0, cyl);
2133                 return (0);
2134         }
2135         /*XXX confusing: some branches return immediately, others end up here*/
2136         return (1); /* Come back immediatly to new state */
2137 }
2138
2139 static int
2140 retrier(struct fdc_data *fdc)
2141 {
2142         struct bio *bio;
2143         struct buf *bp;
2144         struct fd_data *fd;
2145         cdev_t dev;
2146         int fdu;
2147
2148         bio = fdc->bio;
2149         bp = bio->bio_buf;
2150         dev = bio->bio_driver_info;
2151
2152         /* XXX shouldn't this be cached somewhere?  */
2153         fdu = dkunit(dev);
2154         fd = devclass_get_softc(fd_devclass, fdu);
2155         if (fd->options & FDOPT_NORETRY)
2156                 goto fail;
2157
2158         switch (fdc->retry) {
2159         case 0: case 1: case 2:
2160                 fdc->state = SEEKCOMPLETE;
2161                 break;
2162         case 3: case 4: case 5:
2163                 fdc->state = STARTRECAL;
2164                 break;
2165         case 6:
2166                 fdc->state = RESETCTLR;
2167                 break;
2168         case 7:
2169                 break;
2170         default:
2171         fail:
2172                 {
2173                         int printerror = (fd->options & FDOPT_NOERRLOG) == 0;
2174
2175                         if (printerror) {
2176                                 /*
2177                                  * note: use the correct device for more
2178                                  * verbose error reporting.
2179                                  */
2180                                 diskerr(bio, dev,
2181                                         "hard error", LOG_PRINTF,
2182                                         fdc->fd->skip);
2183                         }
2184                         if (printerror) {
2185                                 if (fdc->flags & FDC_STAT_VALID)
2186                                         kprintf(
2187                         " (ST0 %b ST1 %b ST2 %b cyl %u hd %u sec %u)\n",
2188                                                fdc->status[0], NE7_ST0BITS,
2189                                                fdc->status[1], NE7_ST1BITS,
2190                                                fdc->status[2], NE7_ST2BITS,
2191                                                fdc->status[3], fdc->status[4],
2192                                                fdc->status[5]);
2193                                 else
2194                                         kprintf(" (No status)\n");
2195                         }
2196                 }
2197                 bp->b_flags |= B_ERROR;
2198                 bp->b_error = EIO;
2199                 bp->b_resid += bp->b_bcount - fdc->fd->skip;
2200                 fdc->bio = NULL;
2201                 fdc->fd->skip = 0;
2202                 device_unbusy(fd->dev);
2203                 devstat_end_transaction_buf(&fdc->fd->device_stats, bp);
2204                 biodone(bio);
2205                 fdc->state = FINDWORK;
2206                 fdc->flags |= FDC_NEEDS_RESET;
2207                 fdc->fd = (fd_p) 0;
2208                 fdc->fdu = -1;
2209                 return (1);
2210         }
2211         fdc->retry++;
2212         return (1);
2213 }
2214
2215 static int
2216 fdformat(cdev_t dev, struct fd_formb *finfo, struct ucred *cred)
2217 {
2218         fdu_t   fdu;
2219         fd_p    fd;
2220         struct buf *bp;
2221         int rv = 0;
2222         size_t fdblk;
2223
2224         fdu     = dkunit(dev);
2225         fd      = devclass_get_softc(fd_devclass, fdu);
2226         fdblk = 128 << fd->ft.secsize;
2227
2228         /* set up a buffer header for fdstrategy() */
2229         bp = getpbuf(NULL);
2230         bp->b_cmd = BUF_CMD_FORMAT;
2231
2232         /*
2233          * calculate a fake blkno, so fdstrategy() would initiate a
2234          * seek to the requested cylinder
2235          */
2236         bp->b_bio1.bio_offset = (off_t)(finfo->cyl *
2237                 (fd->ft.sectrac * fd->ft.heads)
2238                 + finfo->head * fd->ft.sectrac) * fdblk;
2239         bp->b_bio1.bio_driver_info = dev;
2240         bp->b_bio1.bio_flags |= BIO_SYNC;
2241         bp->b_bio1.bio_done = biodone_sync;
2242
2243         bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs;
2244         bp->b_data = (caddr_t)finfo;
2245
2246         /* now do the format */
2247         dev_dstrategy(dev, &bp->b_bio1);
2248
2249         /* ...and wait for it to complete */
2250         rv = biowait_timeout(&bp->b_bio1, "fdform", 20 * hz);
2251         if (rv == EWOULDBLOCK) {
2252                 /* timed out */
2253                 rv = EIO;
2254                 device_unbusy(fd->dev);
2255                 biodone(&bp->b_bio1);
2256         }
2257         if (bp->b_flags & B_ERROR)
2258                 rv = bp->b_error;
2259         /*
2260          * allow the process to be swapped
2261          */
2262         relpbuf(bp, NULL);
2263         return rv;
2264 }
2265
2266 /*
2267  * TODO: don't allocate buffer on stack.
2268  */
2269
2270 static int
2271 fdioctl(struct dev_ioctl_args *ap)
2272 {
2273         cdev_t dev = ap->a_head.a_dev;
2274         fdu_t   fdu = dkunit(dev);
2275         fd_p    fd = devclass_get_softc(fd_devclass, fdu);
2276         struct fdc_status *fsp;
2277         int error = 0;
2278
2279         switch (ap->a_cmd) {
2280         case FD_FORM:
2281                 if ((ap->a_fflag & FWRITE) == 0)
2282                         error = EBADF;  /* must be opened for writing */
2283                 else if (((struct fd_formb *)ap->a_data)->format_version !=
2284                         FD_FORMAT_VERSION)
2285                         error = EINVAL; /* wrong version of formatting prog */
2286                 else
2287                         error = fdformat(dev, (struct fd_formb *)ap->a_data, ap->a_cred);
2288                 break;
2289
2290         case FD_GTYPE:                  /* get drive type */
2291                 *(struct fd_type *)ap->a_data = fd->ft;
2292                 break;
2293
2294         case FD_STYPE:                  /* set drive type */
2295                 /* this is considered harmful; only allow for superuser */
2296                 if (priv_check_cred(ap->a_cred, PRIV_ROOT, 0) != 0)
2297                         return EPERM;
2298                 fd->ft = *(struct fd_type *)ap->a_data;
2299                 break;
2300
2301         case FD_GOPTS:                  /* get drive options */
2302                 *(int *)ap->a_data = fd->options;
2303                 break;
2304
2305         case FD_SOPTS:                  /* set drive options */
2306                 fd->options = *(int *)ap->a_data;
2307                 break;
2308
2309         case FD_GSTAT:
2310                 fsp = (struct fdc_status *)ap->a_data;
2311                 if ((fd->fdc->flags & FDC_STAT_VALID) == 0)
2312                         return EINVAL;
2313                 memcpy(fsp->status, fd->fdc->status, 7 * sizeof(u_int));
2314                 break;
2315
2316         default:
2317                 error = ENOTTY;
2318                 break;
2319         }
2320         return (error);
2321 }
2322
2323 /*
2324  * Hello emacs, these are the
2325  * Local Variables:
2326  *  c-indent-level:               8
2327  *  c-continued-statement-offset: 8
2328  *  c-continued-brace-offset:     0
2329  *  c-brace-offset:              -8
2330  *  c-brace-imaginary-offset:     0
2331  *  c-argdecl-indent:             8
2332  *  c-label-offset:              -8
2333  *  c++-hanging-braces:           1
2334  *  c++-access-specifier-offset: -8
2335  *  c++-empty-arglist-indent:     8
2336  *  c++-friend-offset:            0
2337  * End:
2338  */