2 * Copyright (c) 1997 Poul-Henning Kamp
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * From Id: lpt.c,v 1.55.2.1 1996/11/12 09:08:38 phk Exp
27 * $FreeBSD: src/sys/dev/ppbus/if_plip.c,v 1.19.2.1 2000/05/24 00:20:57 n_hibma Exp $
28 * $DragonFly: src/sys/dev/netif/plip/if_plip.c,v 1.12 2005/06/13 14:00:29 joerg Exp $
32 * Parallel port TCP/IP interfaces added. I looked at the driver from
33 * MACH but this is a complete rewrite, and btw. incompatible, and it
34 * should perform better too. I have never run the MACH driver though.
36 * This driver sends two bytes (0x08, 0x00) in front of each packet,
37 * to allow us to distinguish another format later.
39 * Now added an Linux/Crynwr compatibility mode which is enabled using
40 * IF_LINK0 - Tim Wilkinson.
43 * Make HDLC/PPP mode, use IF_LLC1 to enable.
45 * Connect the two computers using a Laplink parallel cable to use this
48 * +----------------------------------------+
49 * |A-name A-End B-End Descr. Port/Bit |
50 * +----------------------------------------+
51 * |DATA0 2 15 Data 0/0x01 |
52 * |-ERROR 15 2 1/0x08 |
53 * +----------------------------------------+
54 * |DATA1 3 13 Data 0/0x02 |
55 * |+SLCT 13 3 1/0x10 |
56 * +----------------------------------------+
57 * |DATA2 4 12 Data 0/0x04 |
59 * +----------------------------------------+
60 * |DATA3 5 10 Strobe 0/0x08 |
62 * +----------------------------------------+
63 * |DATA4 6 11 Data 0/0x10 |
64 * |BUSY 11 6 1/~0x80 |
65 * +----------------------------------------+
66 * |GND 18-25 18-25 GND - |
67 * +----------------------------------------+
69 * Expect transfer-rates up to 75 kbyte/sec.
71 * If GCC could correctly grok
72 * register int port asm("edx")
73 * the code would be cleaner
75 * Poul-Henning Kamp <phk@freebsd.org>
79 * Update for ppbus, PLIP support only - Nicolas Souchu
84 #include <sys/param.h>
85 #include <sys/systm.h>
86 #include <sys/module.h>
89 #include <sys/socket.h>
90 #include <sys/sockio.h>
91 #include <sys/kernel.h>
92 #include <sys/malloc.h>
93 #include <sys/thread2.h>
95 #include <machine/clock.h>
96 #include <machine/bus.h>
97 #include <machine/resource.h>
101 #include <net/ifq_var.h>
102 #include <net/if_types.h>
103 #include <net/netisr.h>
105 #include <netinet/in.h>
106 #include <netinet/in_var.h>
110 #include <bus/ppbus/ppbconf.h>
111 #include "ppbus_if.h"
112 #include <bus/ppbus/ppbio.h>
114 #ifndef LPMTU /* MTU for the lp# interfaces */
118 #ifndef LPMAXSPIN1 /* DELAY factor for the lp# interfaces */
119 #define LPMAXSPIN1 8000 /* Spinning for remote intr to happen */
122 #ifndef LPMAXSPIN2 /* DELAY factor for the lp# interfaces */
123 #define LPMAXSPIN2 500 /* Spinning for remote handshake to happen */
126 #ifndef LPMAXERRS /* Max errors before !RUNNING */
127 #define LPMAXERRS 100
130 #define CLPIPHDRLEN 14 /* We send dummy ethernet addresses (two) + packet type in front of packet */
131 #define CLPIP_SHAKE 0x80 /* This bit toggles between nibble reception */
132 #define MLPIPHDRLEN CLPIPHDRLEN
134 #define LPIPHDRLEN 2 /* We send 0x08, 0x00 in front of packet */
135 #define LPIP_SHAKE 0x40 /* This bit toggles between nibble reception */
136 #if !defined(MLPIPHDRLEN) || LPIPHDRLEN > MLPIPHDRLEN
137 #define MLPIPHDRLEN LPIPHDRLEN
140 #define LPIPTBLSIZE 256 /* Size of octet translation table */
142 #define lprintf if (lptflag) printf
145 static int volatile lptflag = 1;
147 static int volatile lptflag = 0;
151 unsigned short lp_unit;
157 struct resource *res_irq;
160 /* Tables for the lp# interface */
161 static u_char *txmith;
162 #define txmitl (txmith+(1*LPIPTBLSIZE))
163 #define trecvh (txmith+(2*LPIPTBLSIZE))
164 #define trecvl (txmith+(3*LPIPTBLSIZE))
166 static u_char *ctxmith;
167 #define ctxmitl (ctxmith+(1*LPIPTBLSIZE))
168 #define ctrecvh (ctxmith+(2*LPIPTBLSIZE))
169 #define ctrecvl (ctxmith+(3*LPIPTBLSIZE))
171 /* Functions for the lp# interface */
172 static int lpinittables(void);
173 static int lpioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
174 static int lpoutput(struct ifnet *, struct mbuf *, struct sockaddr *,
176 static void lp_intr(void *);
178 #define DEVTOSOFTC(dev) \
179 ((struct lp_data *)device_get_softc(dev))
180 #define UNITOSOFTC(unit) \
181 ((struct lp_data *)devclass_get_softc(lp_devclass, (unit)))
182 #define UNITODEVICE(unit) \
183 (devclass_get_device(lp_devclass, (unit)))
185 static devclass_t lp_devclass;
188 lp_identify(driver_t *driver, device_t parent)
191 BUS_ADD_CHILD(parent, 0, "plip", 0);
197 lp_probe(device_t dev)
199 device_t ppbus = device_get_parent(dev);
204 lp = DEVTOSOFTC(dev);
205 bzero(lp, sizeof(struct lp_data));
207 /* retrieve the ppbus irq */
208 BUS_READ_IVAR(ppbus, dev, PPBUS_IVAR_IRQ, &irq);
210 /* if we haven't interrupts, the probe fails */
212 device_printf(dev, "not an interrupt driven port, failed.\n");
216 /* reserve the interrupt resource, expecting irq is available to continue */
217 lp->res_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &zero, irq, irq, 1,
219 if (lp->res_irq == 0) {
220 device_printf(dev, "cannot reserve interrupt, failed.\n");
225 * lp dependent initialisation.
227 lp->lp_unit = device_get_unit(dev);
229 device_set_desc(dev, "PLIP network interface");
235 lp_attach (device_t dev)
237 struct lp_data *lp = DEVTOSOFTC(dev);
238 struct ifnet *ifp = &lp->sc_if;
241 if_initname(ifp, "lp", device_get_unit(dev));
243 ifp->if_flags = IFF_SIMPLEX | IFF_POINTOPOINT | IFF_MULTICAST;
244 ifp->if_ioctl = lpioctl;
245 ifp->if_output = lpoutput;
246 ifp->if_type = IFT_PARA;
249 ifq_set_maxlen(&ifp->if_snd, IFQ_MAXLEN);
252 bpfattach(ifp, DLT_NULL, sizeof(u_int32_t));
257 * Build the translation tables for the LPIP (BSD unix) protocol.
258 * We don't want to calculate these nasties in our tight loop, so we
259 * precalculate them when we initialize.
267 txmith = malloc(4*LPIPTBLSIZE, M_DEVBUF, M_WAITOK);
270 ctxmith = malloc(4*LPIPTBLSIZE, M_DEVBUF, M_WAITOK);
272 for (i=0; i < LPIPTBLSIZE; i++) {
273 ctxmith[i] = (i & 0xF0) >> 4;
274 ctxmitl[i] = 0x10 | (i & 0x0F);
275 ctrecvh[i] = (i & 0x78) << 1;
276 ctrecvl[i] = (i & 0x78) >> 3;
279 for (i=0; i < LPIPTBLSIZE; i++) {
280 txmith[i] = ((i & 0x80) >> 3) | ((i & 0x70) >> 4) | 0x08;
281 txmitl[i] = ((i & 0x08) << 1) | (i & 0x07);
282 trecvh[i] = ((~i) & 0x80) | ((i & 0x38) << 1);
283 trecvl[i] = (((~i) & 0x80) >> 4) | ((i & 0x38) >> 3);
290 * Process an ioctl request.
294 lpioctl (struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
296 device_t dev = UNITODEVICE(ifp->if_dunit);
297 device_t ppbus = device_get_parent(dev);
298 struct lp_data *sc = DEVTOSOFTC(dev);
299 struct ifaddr *ifa = (struct ifaddr *)data;
300 struct ifreq *ifr = (struct ifreq *)data;
310 if (ifa->ifa_addr->sa_family != AF_INET)
313 ifp->if_flags |= IFF_UP;
316 if ((!(ifp->if_flags & IFF_UP)) && (ifp->if_flags & IFF_RUNNING)) {
318 ppb_wctr(ppbus, 0x00);
319 ifp->if_flags &= ~IFF_RUNNING;
321 /* IFF_UP is not set, try to release the bus anyway */
322 ppb_release_bus(ppbus, dev);
325 if (((ifp->if_flags & IFF_UP)) && (!(ifp->if_flags & IFF_RUNNING))) {
328 * Should the request be interruptible?
330 if ((error = ppb_request_bus(ppbus, dev, PPB_WAIT|PPB_INTR)))
333 /* Now IFF_UP means that we own the bus */
335 ppb_set_mode(ppbus, PPB_COMPATIBLE);
337 if (lpinittables()) {
338 ppb_release_bus(ppbus, dev);
342 sc->sc_ifbuf = malloc(sc->sc_if.if_mtu + MLPIPHDRLEN,
345 ppb_release_bus(ppbus, dev);
349 /* attach our interrupt handler, later detached when the bus is released */
350 error = BUS_SETUP_INTR(ppbus, dev, sc->res_irq, INTR_TYPE_NET,
351 lp_intr, dev, &ih, NULL);
353 ppb_release_bus(ppbus, dev);
357 ppb_wctr(ppbus, IRQENABLE);
358 ifp->if_flags |= IFF_RUNNING;
364 sc->sc_ifbuf = malloc(ifr->ifr_mtu+MLPIPHDRLEN, M_DEVBUF, M_WAITOK);
367 sc->sc_if.if_mtu = ifr->ifr_mtu;
371 ifr->ifr_mtu = sc->sc_if.if_mtu;
377 return EAFNOSUPPORT; /* XXX */
379 switch (ifr->ifr_addr.sa_family) {
391 * No ifmedia support at this stage; maybe use it
392 * in future for eg. protocol selection.
397 lprintf("LP:ioctl(0x%lx)\n", cmd);
404 clpoutbyte (u_char byte, int spin, device_t ppbus)
406 ppb_wdtr(ppbus, ctxmitl[byte]);
407 while (ppb_rstr(ppbus) & CLPIP_SHAKE)
411 ppb_wdtr(ppbus, ctxmith[byte]);
412 while (!(ppb_rstr(ppbus) & CLPIP_SHAKE))
420 clpinbyte (int spin, device_t ppbus)
424 while((ppb_rstr(ppbus) & CLPIP_SHAKE))
428 cl = ppb_rstr(ppbus);
429 ppb_wdtr(ppbus, 0x10);
431 while(!(ppb_rstr(ppbus) & CLPIP_SHAKE))
436 ppb_wdtr(ppbus, 0x00);
438 return (ctrecvl[cl] | ctrecvh[c]);
442 lptap(struct ifnet *ifp, struct mbuf *m)
445 * We need to prepend the address family as a four byte field.
447 static const uint32_t af = AF_INET;
450 bpf_ptap(ifp->if_bpf, m, &af, sizeof(af));
456 device_t dev = (device_t)arg;
457 device_t ppbus = device_get_parent(dev);
458 struct lp_data *sc = DEVTOSOFTC(dev);
466 if (sc->sc_if.if_flags & IFF_LINK0) {
468 /* Ack. the request */
469 ppb_wdtr(ppbus, 0x01);
471 /* Get the packet length */
472 j = clpinbyte(LPMAXSPIN2, ppbus);
476 j = clpinbyte(LPMAXSPIN2, ppbus);
479 len = len + (j << 8);
480 if (len > sc->sc_if.if_mtu + MLPIPHDRLEN)
486 j = clpinbyte(LPMAXSPIN2, ppbus);
492 /* Get and ignore checksum */
493 j = clpinbyte(LPMAXSPIN2, ppbus);
498 len = bp - sc->sc_ifbuf;
499 if (len <= CLPIPHDRLEN)
505 sc->sc_if.if_ipackets++;
506 sc->sc_if.if_ibytes += len;
507 top = m_devget(sc->sc_ifbuf + CLPIPHDRLEN, len, 0, &sc->sc_if, 0);
509 if (sc->sc_if.if_bpf)
510 lptap(&sc->sc_if, top);
511 netisr_queue(NETISR_IP, top);
515 while ((ppb_rstr(ppbus) & LPIP_SHAKE)) {
516 len = sc->sc_if.if_mtu + LPIPHDRLEN;
520 cl = ppb_rstr(ppbus);
524 while((ppb_rstr(ppbus) & LPIP_SHAKE))
530 *bp++= trecvh[cl] | trecvl[c];
533 while (!((cl=ppb_rstr(ppbus)) & LPIP_SHAKE)) {
535 (((cl = ppb_rstr(ppbus)) ^ 0xb8) & 0xf8) ==
543 len = bp - sc->sc_ifbuf;
544 if (len <= LPIPHDRLEN)
550 sc->sc_if.if_ipackets++;
551 sc->sc_if.if_ibytes += len;
552 top = m_devget(sc->sc_ifbuf + LPIPHDRLEN, len, 0, &sc->sc_if, 0);
554 if (sc->sc_if.if_bpf)
555 lptap(&sc->sc_if, top);
556 netisr_queue(NETISR_IP, top);
564 sc->sc_if.if_ierrors++;
568 * We are not able to send receive anything for now,
569 * so stop wasting our time
571 if (sc->sc_iferrs > LPMAXERRS) {
572 printf("lp%d: Too many errors, Going off-line.\n", device_get_unit(dev));
573 ppb_wctr(ppbus, 0x00);
574 sc->sc_if.if_flags &= ~IFF_RUNNING;
584 lpoutbyte (u_char byte, int spin, device_t ppbus)
586 ppb_wdtr(ppbus, txmith[byte]);
587 while (!(ppb_rstr(ppbus) & LPIP_SHAKE))
590 ppb_wdtr(ppbus, txmitl[byte]);
591 while (ppb_rstr(ppbus) & LPIP_SHAKE)
598 lpoutput (struct ifnet *ifp, struct mbuf *m,
599 struct sockaddr *dst, struct rtentry *rt)
601 device_t dev = UNITODEVICE(ifp->if_dunit);
602 device_t ppbus = device_get_parent(dev);
610 /* We need a sensible value if we abort */
612 ifp->if_flags |= IFF_RUNNING;
614 err = 1; /* assume we're aborting because of an error */
618 /* Suspend (on laptops) or receive-errors might have taken us offline */
619 ppb_wctr(ppbus, IRQENABLE);
621 if (ifp->if_flags & IFF_LINK0) {
623 if (!(ppb_rstr(ppbus) & CLPIP_SHAKE)) {
628 /* Alert other end to pending packet */
630 ppb_wdtr(ppbus, 0x08);
631 while ((ppb_rstr(ppbus) & 0x08) == 0)
636 /* Calculate length of packet, then send that */
638 count += 14; /* Ethernet header len */
641 for (mm = m; mm; mm = mm->m_next) {
644 if (clpoutbyte(count & 0xFF, LPMAXSPIN1, ppbus))
646 if (clpoutbyte((count >> 8) & 0xFF, LPMAXSPIN1, ppbus))
649 /* Send dummy ethernet header */
650 for (i = 0; i < 12; i++) {
651 if (clpoutbyte(i, LPMAXSPIN1, ppbus))
656 if (clpoutbyte(0x08, LPMAXSPIN1, ppbus))
658 if (clpoutbyte(0x00, LPMAXSPIN1, ppbus))
660 chksum += 0x08 + 0x00; /* Add into checksum */
664 cp = mtod(mm, u_char *);
668 if (clpoutbyte(*cp++, LPMAXSPIN2, ppbus))
671 } while ((mm = mm->m_next));
674 if (clpoutbyte(chksum, LPMAXSPIN2, ppbus))
680 err = 0; /* No errors */
683 if (err) { /* if we didn't timeout... */
688 ifp->if_obytes += m->m_pkthdr.len;
695 if (!(ppb_rstr(ppbus) & CLPIP_SHAKE)) {
703 if (ppb_rstr(ppbus) & LPIP_SHAKE) {
708 if (lpoutbyte(0x08, LPMAXSPIN1, ppbus))
710 if (lpoutbyte(0x00, LPMAXSPIN2, ppbus))
715 cp = mtod(mm,u_char *);
718 if (lpoutbyte(*cp++, LPMAXSPIN2, ppbus))
720 } while ((mm = mm->m_next));
722 err = 0; /* no errors were encountered */
726 ppb_wdtr(ppbus, txmitl[*cp] ^ 0x17);
728 if (err) { /* if we didn't timeout... */
733 ifp->if_obytes += m->m_pkthdr.len;
740 if (ppb_rstr(ppbus) & LPIP_SHAKE) {
749 static device_method_t lp_methods[] = {
750 /* device interface */
751 DEVMETHOD(device_identify, lp_identify),
752 DEVMETHOD(device_probe, lp_probe),
753 DEVMETHOD(device_attach, lp_attach),
758 static driver_t lp_driver = {
761 sizeof(struct lp_data),
764 DECLARE_DUMMY_MODULE(if_plip);
765 DRIVER_MODULE(if_plip, ppbus, lp_driver, lp_devclass, 0, 0);