contrib/binutils-2.21/binutils/doc/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17 VPATH = @srcdir@
  18 pkgdatadir = $(datadir)/@PACKAGE@
  19 pkgincludedir = $(includedir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkglibexecdir = $(libexecdir)/@PACKAGE@
  22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  23 install_sh_DATA = $(install_sh) -c -m 644
  24 install_sh_PROGRAM = $(install_sh) -c
  25 install_sh_SCRIPT = $(install_sh) -c
  26 INSTALL_HEADER = $(INSTALL_DATA)
  27 transform = $(program_transform_name)
  28 NORMAL_INSTALL = :
  29 PRE_INSTALL = :
  30 POST_INSTALL = :
  31 NORMAL_UNINSTALL = :
  32 PRE_UNINSTALL = :
  33 POST_UNINSTALL = :
  34 build_triplet = @build@
  35 host_triplet = @host@
  36 target_triplet = @target@
  37 subdir = doc
  38 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
  39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  40 am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
  41         $(top_srcdir)/../config/zlib.m4 \
  42         $(top_srcdir)/../bfd/warning.m4 \
  43         $(top_srcdir)/../config/depstand.m4 \
  44         $(top_srcdir)/../config/gettext-sister.m4 \
  45         $(top_srcdir)/../config/iconv.m4 \
  46         $(top_srcdir)/../config/largefile.m4 \
  47         $(top_srcdir)/../config/lead-dot.m4 \
  48         $(top_srcdir)/../config/lib-ld.m4 \
  49         $(top_srcdir)/../config/lib-link.m4 \
  50         $(top_srcdir)/../config/lib-prefix.m4 \
  51         $(top_srcdir)/../config/nls.m4 \
  52         $(top_srcdir)/../config/override.m4 \
  53         $(top_srcdir)/../config/plugins.m4 \
  54         $(top_srcdir)/../config/po.m4 \
  55         $(top_srcdir)/../config/progtest.m4 \
  56         $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
  57         $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
  58         $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.in
  59 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  60         $(ACLOCAL_M4)
  61 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  62 CONFIG_HEADER = $(top_builddir)/config.h
  63 CONFIG_CLEAN_FILES =
  64 CONFIG_CLEAN_VPATH_FILES =
  65 depcomp =
  66 am__depfiles_maybe =
  67 SOURCES =
  68 INFO_DEPS = binutils.info
  69 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
  70 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
  71 DVIS = binutils.dvi
  72 PDFS = binutils.pdf
  73 PSS = binutils.ps
  74 HTMLS = binutils.html
  75 TEXINFOS = binutils.texi
  76 TEXI2PDF = $(TEXI2DVI) --pdf --batch
  77 MAKEINFOHTML = $(MAKEINFO) --html
  78 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
  79 DVIPS = dvips
  80 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  81 am__vpath_adj = case $$p in \
  82     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  83     *) f=$$p;; \
  84   esac;
  85 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  86 am__install_max = 40
  87 am__nobase_strip_setup = \
  88   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  89 am__nobase_strip = \
  90   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  91 am__nobase_list = $(am__nobase_strip_setup); \
  92   for p in $$list; do echo "$$p $$p"; done | \
  93   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  94   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  95     if (++n[$$2] == $(am__install_max)) \
  96       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  97     END { for (dir in files) print dir, files[dir] }'
  98 am__base_list = \
  99   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 100   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 101 man1dir = $(mandir)/man1
 102 am__installdirs = "$(DESTDIR)$(man1dir)"
 103 NROFF = nroff
 104 MANS = $(man_MANS)
 105 ACLOCAL = @ACLOCAL@
 106 ALLOCA = @ALLOCA@
 107 AMTAR = @AMTAR@
 108 AR = @AR@
 109 AUTOCONF = @AUTOCONF@
 110 AUTOHEADER = @AUTOHEADER@
 111 AUTOMAKE = @AUTOMAKE@
 112 AWK = @AWK@
 113 BUILD_DLLTOOL = @BUILD_DLLTOOL@
 114 BUILD_DLLWRAP = @BUILD_DLLWRAP@
 115 BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
 116 BUILD_MISC = @BUILD_MISC@
 117 BUILD_NLMCONV = @BUILD_NLMCONV@
 118 BUILD_SRCONV = @BUILD_SRCONV@
 119 BUILD_WINDMC = @BUILD_WINDMC@
 120 BUILD_WINDRES = @BUILD_WINDRES@
 121 CATALOGS = @CATALOGS@
 122 CATOBJEXT = @CATOBJEXT@
 123 CC = @CC@
 124 CCDEPMODE = @CCDEPMODE@
 125 CC_FOR_BUILD = @CC_FOR_BUILD@
 126 CFLAGS = @CFLAGS@
 127 CPP = @CPP@
 128 CPPFLAGS = @CPPFLAGS@
 129 CYGPATH_W = @CYGPATH_W@
 130 DATADIRNAME = @DATADIRNAME@
 131 DEFS = @DEFS@
 132 DEMANGLER_NAME = @DEMANGLER_NAME@
 133 DEPDIR = @DEPDIR@
 134 DLLTOOL_DEFS = @DLLTOOL_DEFS@
 135 DSYMUTIL = @DSYMUTIL@
 136 DUMPBIN = @DUMPBIN@
 137 ECHO_C = @ECHO_C@
 138 ECHO_N = @ECHO_N@
 139 ECHO_T = @ECHO_T@
 140 EGREP = @EGREP@
 141 EMULATION = @EMULATION@
 142 EMULATION_VECTOR = @EMULATION_VECTOR@
 143 EXEEXT = @EXEEXT@
 144 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 145 FGREP = @FGREP@
 146 GENCAT = @GENCAT@
 147 GMSGFMT = @GMSGFMT@
 148 GREP = @GREP@
 149 HDEFINES = @HDEFINES@
 150 INCINTL = @INCINTL@
 151 INSTALL = @INSTALL@
 152 INSTALL_DATA = @INSTALL_DATA@
 153 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 154 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 155 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 156 INSTOBJEXT = @INSTOBJEXT@
 157 LD = @LD@
 158 LDFLAGS = @LDFLAGS@
 159 LEX = @LEX@
 160 LEXLIB = @LEXLIB@
 161 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 162 LIBICONV = @LIBICONV@
 163 LIBINTL = @LIBINTL@
 164 LIBINTL_DEP = @LIBINTL_DEP@
 165 LIBOBJS = @LIBOBJS@
 166 LIBS = @LIBS@
 167 LIBTOOL = @LIBTOOL@
 168 LIPO = @LIPO@
 169 LN_S = @LN_S@
 170 LTLIBICONV = @LTLIBICONV@
 171 LTLIBOBJS = @LTLIBOBJS@
 172 MAINT = @MAINT@
 173 MAKEINFO = @MAKEINFO@
 174 MKDIR_P = @MKDIR_P@
 175 MKINSTALLDIRS = @MKINSTALLDIRS@
 176 MSGFMT = @MSGFMT@
 177 MSGMERGE = @MSGMERGE@
 178 NLMCONV_DEFS = @NLMCONV_DEFS@
 179 NM = @NM@
 180 NMEDIT = @NMEDIT@
 181 NO_WERROR = @NO_WERROR@
 182 OBJDUMP = @OBJDUMP@
 183 OBJDUMP_DEFS = @OBJDUMP_DEFS@
 184 OBJEXT = @OBJEXT@
 185 OTOOL = @OTOOL@
 186 OTOOL64 = @OTOOL64@
 187 PACKAGE = @PACKAGE@
 188 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 189 PACKAGE_NAME = @PACKAGE_NAME@
 190 PACKAGE_STRING = @PACKAGE_STRING@
 191 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 192 PACKAGE_URL = @PACKAGE_URL@
 193 PACKAGE_VERSION = @PACKAGE_VERSION@
 194 PATH_SEPARATOR = @PATH_SEPARATOR@
 195 POSUB = @POSUB@
 196 RANLIB = @RANLIB@
 197 SED = @SED@
 198 SET_MAKE = @SET_MAKE@
 199 SHELL = @SHELL@
 200 STRIP = @STRIP@
 201 USE_NLS = @USE_NLS@
 202 VERSION = @VERSION@
 203 WARN_CFLAGS = @WARN_CFLAGS@
 204 XGETTEXT = @XGETTEXT@
 205 YACC = @YACC@
 206 YFLAGS = @YFLAGS@
 207 abs_builddir = @abs_builddir@
 208 abs_srcdir = @abs_srcdir@
 209 abs_top_builddir = @abs_top_builddir@
 210 abs_top_srcdir = @abs_top_srcdir@
 211 ac_ct_CC = @ac_ct_CC@
 212 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 213 am__include = @am__include@
 214 am__leading_dot = @am__leading_dot@
 215 am__quote = @am__quote@
 216 am__tar = @am__tar@
 217 am__untar = @am__untar@
 218 bindir = @bindir@
 219 build = @build@
 220 build_alias = @build_alias@
 221 build_cpu = @build_cpu@
 222 build_os = @build_os@
 223 build_vendor = @build_vendor@
 224 builddir = @builddir@
 225 datadir = @datadir@
 226 datarootdir = @datarootdir@
 227 docdir = @docdir@
 228 dvidir = @dvidir@
 229 exec_prefix = @exec_prefix@
 230 host = @host@
 231 host_alias = @host_alias@
 232 host_cpu = @host_cpu@
 233 host_os = @host_os@
 234 host_vendor = @host_vendor@
 235 htmldir = @htmldir@
 236 includedir = @includedir@
 237 infodir = @infodir@
 238 install_sh = @install_sh@
 239 libdir = @libdir@
 240 libexecdir = @libexecdir@
 241 localedir = @localedir@
 242 localstatedir = @localstatedir@
 243 mandir = @mandir@
 244 mkdir_p = @mkdir_p@
 245 oldincludedir = @oldincludedir@
 246 pdfdir = @pdfdir@
 247 prefix = @prefix@
 248 program_transform_name = @program_transform_name@
 249 psdir = @psdir@
 250 sbindir = @sbindir@
 251 sharedstatedir = @sharedstatedir@
 252 srcdir = @srcdir@
 253 sysconfdir = @sysconfdir@
 254 target = @target@
 255 target_alias = @target_alias@
 256 target_cpu = @target_cpu@
 257 target_os = @target_os@
 258 target_vendor = @target_vendor@
 259 top_build_prefix = @top_build_prefix@
 260 top_builddir = @top_builddir@
 261 top_srcdir = @top_srcdir@
 262 AUTOMAKE_OPTIONS = cygnus
 263
 264 # What version of the manual you want; "all" includes everything
 265 CONFIG = all
 266
 267 # Options to extract the man page from as.texinfo
 268 MANCONF = -Dman
 269 TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 270 POD2MAN = pod2man --center="GNU Development Tools" \
 271          --release="binutils-$(VERSION)" --section=1
 272
 273
 274 # List of man pages generated from binutils.texi
 275 man_MANS = \
 276         addr2line.1 \
 277         ar.1 \
 278         dlltool.1 \
 279         nlmconv.1 \
 280         nm.1 \
 281         objcopy.1 \
 282         objdump.1 \
 283         ranlib.1 \
 284         readelf.1 \
 285         size.1 \
 286         strings.1 \
 287         strip.1 \
 288         elfedit.1 \
 289         windres.1 \
 290         windmc.1 \
 291         $(DEMANGLER_NAME).1
 292
 293 info_TEXINFOS = binutils.texi
 294 binutils_TEXI = $(srcdir)/binutils.texi
 295 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 296                    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 297
 298 TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 299                     -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 300
 301 MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
 302 MAINTAINERCLEANFILES = binutils.info
 303
 304 # Automake 1.9 will only build info files in the objdir if they are
 305 # mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
 306 # though, so we use a bogus condition.
 307 @GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info
 308 all: all-am
 309
 310 .SUFFIXES:
 311 .SUFFIXES: .dvi .ps
 312 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 313         @for dep in $?; do \
 314           case '$(am__configure_deps)' in \
 315             *$$dep*) \
 316               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 317                 && { if test -f $@; then exit 0; else break; fi; }; \
 318               exit 1;; \
 319           esac; \
 320         done; \
 321         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
 322         $(am__cd) $(top_srcdir) && \
 323           $(AUTOMAKE) --foreign doc/Makefile
 324 .PRECIOUS: Makefile
 325 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 326         @case '$?' in \
 327           *config.status*) \
 328             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 329           *) \
 330             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 331             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 332         esac;
 333
 334 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 335         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 336
 337 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 338         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 339 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 340         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 341 $(am__aclocal_m4_deps):
 342
 343 mostlyclean-libtool:
 344         -rm -f *.lo
 345
 346 clean-libtool:
 347         -rm -rf .libs _libs
 348
 349 binutils.info: binutils.texi
 350         restore=: && backupdir="$(am__leading_dot)am$$$$" && \
 351         rm -rf $$backupdir && mkdir $$backupdir && \
 352         if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 353           for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 354             if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 355           done; \
 356         else :; fi && \
 357         if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 358          -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
 359         then \
 360           rc=0; \
 361         else \
 362           rc=$$?; \
 363           $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 364         fi; \
 365         rm -rf $$backupdir; exit $$rc
 366
 367 binutils.dvi: binutils.texi
 368         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 369         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 370         $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 371
 372 binutils.pdf: binutils.texi
 373         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 374         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 375         $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 376
 377 binutils.html: binutils.texi
 378         rm -rf $(@:.html=.htp)
 379         if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 380          -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
 381         then \
 382           rm -rf $@; \
 383           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 384             mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 385         else \
 386           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 387             rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 388           exit 1; \
 389         fi
 390 .dvi.ps:
 391         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 392         $(DVIPS) -o $@ $<
 393
 394 uninstall-dvi-am:
 395         @$(NORMAL_UNINSTALL)
 396         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 397         for p in $$list; do \
 398           $(am__strip_dir) \
 399           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 400           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 401         done
 402
 403 uninstall-html-am:
 404         @$(NORMAL_UNINSTALL)
 405         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 406         for p in $$list; do \
 407           $(am__strip_dir) \
 408           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 409           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 410         done
 411
 412 uninstall-info-am:
 413         @$(PRE_UNINSTALL)
 414         @if test -d '$(DESTDIR)$(infodir)' && \
 415             (install-info --version && \
 416              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 417           list='$(INFO_DEPS)'; \
 418           for file in $$list; do \
 419             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 420             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 421             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 422             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 423           done; \
 424         else :; fi
 425         @$(NORMAL_UNINSTALL)
 426         @list='$(INFO_DEPS)'; \
 427         for file in $$list; do \
 428           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 429           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 430           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 431              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 432              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 433            else :; fi); \
 434         done
 435
 436 uninstall-pdf-am:
 437         @$(NORMAL_UNINSTALL)
 438         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 439         for p in $$list; do \
 440           $(am__strip_dir) \
 441           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 442           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 443         done
 444
 445 uninstall-ps-am:
 446         @$(NORMAL_UNINSTALL)
 447         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 448         for p in $$list; do \
 449           $(am__strip_dir) \
 450           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 451           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 452         done
 453
 454 dist-info: $(INFO_DEPS)
 455         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 456         list='$(INFO_DEPS)'; \
 457         for base in $$list; do \
 458           case $$base in \
 459             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 460           esac; \
 461           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 462           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 463           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 464             if test -f $$file; then \
 465               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 466               test -f "$(distdir)/$$relfile" || \
 467                 cp -p $$file "$(distdir)/$$relfile"; \
 468             else :; fi; \
 469           done; \
 470         done
 471
 472 mostlyclean-aminfo:
 473         -rm -rf binutils.aux binutils.cp binutils.cps binutils.fn binutils.fns \
 474           binutils.ky binutils.log binutils.pg binutils.pgs \
 475           binutils.tmp binutils.toc binutils.tp binutils.tps \
 476           binutils.vr binutils.vrs
 477
 478 clean-aminfo:
 479         -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
 480         || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
 481
 482 maintainer-clean-aminfo:
 483         @list='$(INFO_DEPS)'; for i in $$list; do \
 484           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 485           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 486           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 487         done
 488
 489 clean-info: mostlyclean-aminfo clean-aminfo
 490 install-man1: $(man_MANS)
 491         @$(NORMAL_INSTALL)
 492         test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
 493         @list=''; test -n "$(man1dir)" || exit 0; \
 494         { for i in $$list; do echo "$$i"; done; \
 495         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 496           sed -n '/\.1[a-z]*$$/p'; \
 497         } | while read p; do \
 498           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 499           echo "$$d$$p"; echo "$$p"; \
 500         done | \
 501         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 502               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 503         sed 'N;N;s,\n, ,g' | { \
 504         list=; while read file base inst; do \
 505           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 506             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 507             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 508           fi; \
 509         done; \
 510         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 511         while read files; do \
 512           test -z "$$files" || { \
 513             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 514             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 515         done; }
 516
 517 uninstall-man1:
 518         @$(NORMAL_UNINSTALL)
 519         @list=''; test -n "$(man1dir)" || exit 0; \
 520         files=`{ for i in $$list; do echo "$$i"; done; \
 521         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 522           sed -n '/\.1[a-z]*$$/p'; \
 523         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 524               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 525         test -z "$$files" || { \
 526           echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
 527           cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
 528 tags: TAGS
 529 TAGS:
 530
 531 ctags: CTAGS
 532 CTAGS:
 533
 534 check-am:
 535 check: check-am
 536 all-am: Makefile $(MANS)
 537 installdirs:
 538         for dir in "$(DESTDIR)$(man1dir)"; do \
 539           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 540         done
 541 install: install-am
 542 install-exec: install-exec-am
 543 install-data: install-data-am
 544 uninstall: uninstall-am
 545
 546 install-am: all-am
 547         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 548
 549 installcheck: installcheck-am
 550 install-strip:
 551         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 552           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 553           `test -z '$(STRIP)' || \
 554             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 555 mostlyclean-generic:
 556         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 557
 558 clean-generic:
 559
 560 distclean-generic:
 561         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 562         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 563         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 564
 565 maintainer-clean-generic:
 566         @echo "This command is intended for maintainers to use"
 567         @echo "it deletes files that may require special tools to rebuild."
 568         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 569 clean: clean-am
 570
 571 clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
 572
 573 distclean: distclean-am
 574         -rm -f Makefile
 575 distclean-am: clean-am distclean-generic
 576
 577 dvi: dvi-am
 578
 579 dvi-am: $(DVIS)
 580
 581 html: html-am
 582
 583 html-am: $(HTMLS)
 584
 585 info: info-am
 586
 587 info-am: $(INFO_DEPS) info-local
 588
 589 install-data-am: install-data-local install-man
 590
 591 install-dvi: install-dvi-am
 592
 593 install-dvi-am: $(DVIS)
 594         @$(NORMAL_INSTALL)
 595         test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 596         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 597         for p in $$list; do \
 598           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 599           echo "$$d$$p"; \
 600         done | $(am__base_list) | \
 601         while read files; do \
 602           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 603           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 604         done
 605 install-exec-am:
 606
 607 install-html: install-html-am
 608
 609 install-html-am: $(HTMLS)
 610         @$(NORMAL_INSTALL)
 611         test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 612         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 613         for p in $$list; do \
 614           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 615           $(am__strip_dir) \
 616           if test -d "$$d$$p"; then \
 617             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 618             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 619             echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 620             $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 621           else \
 622             list2="$$list2 $$d$$p"; \
 623           fi; \
 624         done; \
 625         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 626         while read files; do \
 627           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 628           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 629         done; }
 630 install-info: install-info-am
 631
 632 install-info-am: $(INFO_DEPS)
 633         @$(NORMAL_INSTALL)
 634         test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 635         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 636         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 637         for file in $$list; do \
 638           case $$file in \
 639             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 640           esac; \
 641           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 642           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 643           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 644                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 645             if test -f $$ifile; then \
 646               echo "$$ifile"; \
 647             else : ; fi; \
 648           done; \
 649         done | $(am__base_list) | \
 650         while read files; do \
 651           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 652           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 653         @$(POST_INSTALL)
 654         @if (install-info --version && \
 655              install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 656           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 657           for file in $$list; do \
 658             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 659             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 660             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 661           done; \
 662         else : ; fi
 663 install-man: install-man1
 664
 665 install-pdf: install-pdf-am
 666
 667 install-pdf-am: $(PDFS)
 668         @$(NORMAL_INSTALL)
 669         test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 670         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 671         for p in $$list; do \
 672           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 673           echo "$$d$$p"; \
 674         done | $(am__base_list) | \
 675         while read files; do \
 676           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 677           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 678 install-ps: install-ps-am
 679
 680 install-ps-am: $(PSS)
 681         @$(NORMAL_INSTALL)
 682         test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 683         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 684         for p in $$list; do \
 685           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 686           echo "$$d$$p"; \
 687         done | $(am__base_list) | \
 688         while read files; do \
 689           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 690           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 691 installcheck-am:
 692
 693 maintainer-clean: maintainer-clean-am
 694         -rm -f Makefile
 695 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 696         maintainer-clean-generic
 697
 698 mostlyclean: mostlyclean-am
 699
 700 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
 701         mostlyclean-libtool
 702
 703 pdf: pdf-am
 704
 705 pdf-am: $(PDFS)
 706
 707 ps: ps-am
 708
 709 ps-am: $(PSS)
 710
 711 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
 712         uninstall-man uninstall-pdf-am uninstall-ps-am
 713
 714 uninstall-man: uninstall-man1
 715
 716 .MAKE: install-am install-strip
 717
 718 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
 719         clean-info clean-libtool dist-info distclean distclean-generic \
 720         distclean-libtool dvi dvi-am html html-am info info-am \
 721         info-local install install-am install-data install-data-am \
 722         install-data-local install-dvi install-dvi-am install-exec \
 723         install-exec-am install-html install-html-am install-info \
 724         install-info-am install-man install-man1 install-pdf \
 725         install-pdf-am install-ps install-ps-am install-strip \
 726         installcheck installcheck-am installdirs maintainer-clean \
 727         maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
 728         mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
 729         pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
 730         uninstall-html-am uninstall-info-am uninstall-man \
 731         uninstall-man1 uninstall-pdf-am uninstall-ps-am
 732
 733
 734 # Man page generation from texinfo
 735 addr2line.1:    $(binutils_TEXI) $(binutils_TEXINFOS)
 736         touch $@
 737         -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
 738         -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 739                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 740         rm -f addr2line.pod
 741
 742 ar.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
 743         touch $@
 744         -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
 745         -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 746                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 747         rm -f ar.pod
 748
 749 dlltool.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 750         touch $@
 751         -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
 752         -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 753                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 754         rm -f dlltool.pod
 755
 756 nlmconv.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 757         touch $@
 758         -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod
 759         -($(POD2MAN) nlmconv.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 760                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 761         rm -f nlmconv.pod
 762
 763 nm.1:   $(binutils_TEXI) $(binutils_TEXINFOS)
 764         touch $@
 765         -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
 766         -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 767                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 768         rm -f nm.pod
 769
 770 objcopy.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 771         touch $@
 772         -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
 773         -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 774                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 775         rm -f objcopy.pod
 776
 777 objdump.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 778         touch $@
 779         -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
 780         -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 781                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 782         rm -f objdump.pod
 783
 784 ranlib.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
 785         touch $@
 786         -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
 787         -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 788                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 789         rm -f ranlib.pod
 790
 791 readelf.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 792         touch $@
 793         -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
 794         -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 795                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 796         rm -f readelf.pod
 797
 798 size.1: $(binutils_TEXI) $(binutils_TEXINFOS)
 799         touch $@
 800         -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
 801         -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 802                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 803         rm -f size.pod
 804
 805 strings.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 806         touch $@
 807         -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
 808         -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 809                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 810         rm -f strings.pod
 811
 812 strip.1:        $(binutils_TEXI) $(binutils_TEXINFOS)
 813         touch $@
 814         -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
 815         -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 816                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 817         rm -f strip.pod
 818
 819 elfedit.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 820         touch $@
 821         -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
 822         -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 823                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 824         rm -f elfedit.pod
 825
 826 windres.1:      $(binutils_TEXI) $(binutils_TEXINFOS)
 827         touch $@
 828         -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
 829         -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 830                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 831         rm -f windres.pod
 832
 833 windmc.1:       $(binutils_TEXI) $(binutils_TEXINFOS)
 834         touch $@
 835         -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
 836         -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 837                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 838         rm -f windmc.pod
 839
 840 cxxfilt.man:    $(binutils_TEXI) $(binutils_TEXINFOS)
 841         touch $@
 842         -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
 843         -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
 844                 mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
 845         rm -f $(DEMANGLER_NAME).pod
 846
 847 $(DEMANGLER_NAME).1: cxxfilt.man Makefile
 848         if test -f cxxfilt.man; then \
 849           man=cxxfilt.man; \
 850         else \
 851           man=$(srcdir)/cxxfilt.man; \
 852         fi; \
 853         sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
 854             -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
 855                 > $(DEMANGLER_NAME).1
 856
 857 # We want install to imply install-info as per GNU standards, despite the
 858 # cygnus option.
 859 install-data-local: install-info
 860
 861 # Maintenance
 862
 863 # We need it for the taz target in ../../Makefile.in.
 864 info-local: $(MANS)
 865
 866 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 867 # Otherwise a system limit (for SysV at least) may be exceeded.
 868 .NOEXPORT: