1 # DragonFly BSD Tinderbox Configuration File
3 # $DragonFly: src/sys/config/Attic/TINDERBOX,v 1.17 2005/07/26 00:29:38 hmp Exp $
10 # ADD TEST OPTIONS HERE
12 options DDB_UNATTENDED
14 options INVARIANT_SUPPORT
17 makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
19 options MATH_EMULATE #Support for x87 emulation
20 options INET #InterNETworking
21 options INET6 #IPv6 communications protocols
22 options FFS #Berkeley Fast Filesystem
23 options FFS_ROOT #FFS usable as root device [keep this!]
24 options SOFTUPDATES #Enable FFS soft updates support
25 options UFS_DIRHASH #Improve performance on big directories
26 options MFS #Memory Filesystem
27 options MD_ROOT #MD is a potential root device
28 options NFS #Network Filesystem
29 options NFS_ROOT #NFS usable as root device, NFS required
30 options MSDOSFS #MSDOS Filesystem
31 options CD9660 #ISO 9660 Filesystem
32 options CD9660_ROOT #CD-ROM usable as root, CD9660 required
33 options PROCFS #Process filesystem
34 options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
35 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
36 options UCONSOLE #Allow users to grab the console
37 options USERCONFIG #boot -c editor
38 options VISUAL_USERCONFIG #visual boot -c editor
39 options KTRACE #ktrace(1) support
40 options SYSVSHM #SYSV-style shared memory
41 options SYSVMSG #SYSV-style message queues
42 options SYSVSEM #SYSV-style semaphores
43 options P1003_1B #Posix P1003_1B real-time extensions
44 options _KPOSIX_PRIORITY_SCHEDULING
45 options ICMP_BANDLIM #Rate limit bad replies
46 options KBD_INSTALL_CDEV # install a CDEV entry in /dev
47 options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~128k to driver.
49 options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
50 # output. Adds ~215k to driver.
53 # To make an SMP kernel, the next two are needed
54 #options SMP # Symmetric MultiProcessor Kernel
55 #options APIC_IO # Symmetric (APIC) I/O
62 device fdc0 at isa? port IO_FD1 irq 6 drq 2
63 device fd0 at fdc0 drive 0
64 device fd1 at fdc0 drive 1
66 # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
67 # don't use the above line for fdc0 but the following one:
70 # ATA and ATAPI devices
71 device ata0 at isa? port IO_WD1 irq 14
72 device ata1 at isa? port IO_WD2 irq 15
74 device atadisk # ATA disk drives
75 device atapicd # ATAPI CDROM drives
76 device atapifd # ATAPI floppy drives
77 device atapist # ATAPI tape drives
78 device atapicam # Emulate ATAPI devices as SCSI via CAM
79 options ATA_STATIC_ID #Static device numbering
82 device ahb # EISA AHA1742 family
83 device ahc # AHA2940 and onboard AIC7xxx devices
84 device ahd # AHA39320/29320 and onboard AIC79xx devices
85 device amd # AMD 53C974 (Tekram DC-390(T))
86 device isp # Qlogic family
87 device mpt # LSI-Logic MPT/Fusion
88 device ncr # NCR/Symbios Logic
89 device sym # NCR/Symbios Logic (newer chipsets)
90 options SYM_SETUP_LP_PROBE_MAP=0x40
91 # Allow ncr to attach legacy NCR devices when
92 # both sym and ncr are configured
100 device ncv # NCR 53C500
101 device nsp # Workbit Ninja SCSI-3
102 device stg # TMC 18C30/18C50
105 device scbus # SCSI bus (required)
106 device da # Direct Access (disks)
107 device sa # Sequential Access (tape etc)
109 device pass # Passthrough device (direct SCSI access)
111 # RAID controllers interfaced to the SCSI subsystem
112 device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
113 device dpt # DPT Smartcache - See LINT for options!
114 device iir # Intel Integrated RAID
115 device mly # Mylex AcceleRAID/eXtremeRAID
116 device ciss # Compaq SmartRAID 5* series
119 device aac # Adaptec FSA RAID, Dell PERC2/PERC3
120 #device aacp # SCSI passthrough for aac (requires CAM)
121 device ida # Compaq Smart RAID
122 device amr # AMI MegaRAID
123 device mlx # Mylex DAC960 family
124 device twe # 3ware Escalade 7000/8000's
125 device twa # 3ware Escalade 9000's
126 device pst # Promise Supertrack
128 # atkbdc0 controls both the keyboard and the PS/2 mouse
129 device atkbdc0 at isa? port IO_KBD
130 device atkbd0 at atkbdc? irq 1 flags 0x1
131 device psm0 at atkbdc? irq 12
135 # splash screen/screen saver
138 # syscons is the default console driver, resembling an SCO console
139 device sc0 at isa? flags 0x100
141 device agp # support several AGP chipsets
143 # Floating point support - do not disable.
144 device npx0 at nexus? port IO_NPX irq 13
146 # Power management support (see LINT for more options)
147 device apm0 at nexus? disable flags 0x20 # Advanced Power Management
149 # PCCARD (PCMCIA) support
155 device sio0 at isa? port IO_COM1 flags 0x10 irq 4
156 device sio1 at isa? port IO_COM2 irq 3
157 device sio2 at isa? disable port IO_COM3 irq 5
158 device sio3 at isa? disable port IO_COM4 irq 9
161 device ppc0 at isa? irq 7
162 device ppbus # Parallel port bus (required)
164 device plip # TCP/IP over parallel
165 device ppi # Parallel port interface device
166 #device vpo # Requires scbus and da
170 device de # DEC/Intel DC21x4x (``Tulip'')
171 device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
172 device txp # 3Com 3cR990 (``Typhoon'')
173 device vx # 3Com 3c590, 3c595 (``Vortex'')
175 # PCI Ethernet NICs that use the common MII bus controller code.
176 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
177 device miibus # MII bus support
178 device bfe # Broadcom BCM440x 10/100 Ethernet
179 device dc # DEC/Intel 21143 and various workalikes
180 device fxp # Intel EtherExpress PRO/100B (82557, 82558)
181 device pcn # AMD Am79C97x PCI 10/100 NICs
182 device rl # RealTek 8129/8139
183 device re # RealTek 8139C+/8169
184 device sf # Adaptec AIC-6915 (``Starfire'')
185 device sis # Silicon Integrated Systems SiS 900/SiS 7016
186 device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
187 device ste # Sundance ST201 (D-Link DFE-550TX)
188 device tl # Texas Instruments ThunderLAN
189 device tx # SMC EtherPower II (83c170 ``EPIC'')
190 device vr # VIA Rhine, Rhine II
191 device wb # Winbond W89C840F
192 device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
193 device bge # Broadcom BCM570x (``Tigon III'')
196 # 'device ed' requires 'device miibus'
197 device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
200 device fe0 at isa? disable port 0x300
203 # Generic 802.11 stack, used by wi
205 # PRISM I IEEE 802.11b wireless NIC.
207 # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
208 # exists only as a PCMCIA device, so there is no ISA attachment needed
209 # and resources will always be dynamically assigned by the pccard code.
211 # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
212 # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
213 # mode (the factory default). If you set the switches on your ISA
214 # card for a manually chosen I/O address and IRQ, you must specify
215 # those parameters here.
217 # The probe order of these is presently determined by i386/isa/isa_compat.c.
218 device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
219 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
220 device lnc0 at isa? disable port 0x280 irq 10 drq 0
221 device cs0 at isa? disable port 0x300
222 device sn0 at isa? disable port 0x300 irq 10
224 # Pseudo devices - the number indicates how many units to allocate.
225 pseudo-device loop # Network loopback
226 pseudo-device ether # Ethernet support
227 pseudo-device sl 1 # Kernel SLIP
228 pseudo-device ppp 1 # Kernel PPP
229 pseudo-device tun # Packet tunnel.
230 pseudo-device pty # Pseudo-ttys (telnet etc)
231 pseudo-device md # Memory "disks"
232 pseudo-device gif # IPv6 and IPv4 tunneling
233 pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
235 pseudo-device crypto # core crypto support, used by wlan
237 # The `bpf' pseudo-device enables the Berkeley Packet Filter.
238 # Be aware of the administrative consequences of enabling this!
239 pseudo-device bpf #Berkeley packet filter
242 device uhci # UHCI PCI->USB interface
243 device ohci # OHCI PCI->USB interface
244 device ehci # USB 2 Support
245 device usb # USB Bus (required)
246 device ugen # Generic
247 device uhid # "Human Interface Devices"
248 device ukbd # Keyboard
249 device ulpt # Printer
250 device umass # Disks/Mass storage - Requires scbus and da
252 device uscanner # Scanners
253 device urio # Diamond Rio MP3 Player
254 # USB Ethernet, requires mii
255 device aue # ADMtek USB ethernet
256 device cue # CATC USB ethernet
257 device kue # Kawasaki LSI USB ethernet
260 device firewire # FireWire bus code
261 device sbp # SCSI over FireWire (Requires scbus and da)
262 device fwe # Ethernet over FireWire (non-standard!)