2 * Copyright (c) 1996 - 2001 John Hay.
3 * Copyright (c) 1996 SDL Communications, Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of the author nor the names of any co-contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * $FreeBSD: src/sys/dev/sr/if_sr.c,v 1.48.2.1 2002/06/17 15:10:58 jhay Exp $
31 * $DragonFly: src/sys/dev/netif/sr/if_sr.c,v 1.21 2006/12/22 23:26:22 swildner Exp $
35 * Programming assumptions and other issues.
37 * Only a 16K window will be used.
39 * The descriptors of a DMA channel will fit in a 16K memory window.
41 * The buffers of a transmit DMA channel will fit in a 16K memory window.
43 * When interface is going up, handshaking is set and it is only cleared
44 * when the interface is down'ed.
46 * There should be a way to set/reset Raw HDLC/PPP, Loopback, DCE/DTE,
47 * internal/external clock, etc.....
51 #include "opt_netgraph.h"
56 #include <sys/param.h>
57 #include <sys/systm.h>
58 #include <sys/kernel.h>
59 #include <sys/malloc.h>
61 #include <sys/sockio.h>
62 #include <sys/socket.h>
63 #include <sys/thread2.h>
69 #include <sys/syslog.h>
71 #include <net/sppp/if_sppp.h>
76 #include <machine/md_var.h>
78 #include "../ic_layer/hd64570.h"
79 #include "if_srregs.h"
82 #include <netgraph/ng_message.h>
83 #include <netgraph/netgraph.h>
85 /* #define USE_MODEMCK */
92 #define PPP_HEADER_LEN 4
95 static int next_sc_unit = 0;
98 static int sr_watcher = 0;
100 #endif /* NETGRAPH */
103 * Define the software interface for the card... There is one for
104 * every channel (port).
108 struct sppp ifsppp; /* PPP service w/in system */
109 #endif /* NETGRAPH */
110 struct sr_hardc *hc; /* card-level information */
112 int unit; /* With regard to all sr devices */
113 int subunit; /* With regard to this card */
116 u_int txdesc; /* DPRAM offset */
117 u_int txstart;/* DPRAM offset */
118 u_int txend; /* DPRAM offset */
119 u_int txtail; /* # of 1st free gran */
120 u_int txmax; /* # of free grans */
121 u_int txeda; /* err descr addr */
122 } block[SR_TX_BLOCKS];
124 char xmit_busy; /* Transmitter is busy */
125 char txb_inuse; /* # of tx grans in use */
126 u_int txb_new; /* ndx to new buffer */
127 u_int txb_next_tx; /* ndx to next gran rdy tx */
129 u_int rxdesc; /* DPRAM offset */
130 u_int rxstart; /* DPRAM offset */
131 u_int rxend; /* DPRAM offset */
132 u_int rxhind; /* ndx to the hd of rx bufrs */
133 u_int rxmax; /* # of avail grans */
135 u_int clk_cfg; /* Clock configuration */
137 int scachan; /* channel # on card */
139 int running; /* something is attached so we are running */
140 int dcd; /* do we have dcd? */
141 /* ---netgraph bits --- */
142 char nodename[NG_NODELEN + 1]; /* store our node name */
143 int datahooks; /* number of data hooks attached */
144 node_p node; /* netgraph node */
145 hook_p hook; /* data hook */
147 struct ifqueue xmitq_hipri; /* hi-priority transmit queue */
148 struct ifqueue xmitq; /* transmit queue */
149 int flags; /* state */
150 #define SCF_RUNNING 0x01 /* board is active */
151 #define SCF_OACTIVE 0x02 /* output is active */
152 int out_dog; /* watchdog cycles output count-down */
153 struct callout sr_timer; /* timeout(9) handle */
154 u_long inbytes, outbytes; /* stats */
155 u_long lastinbytes, lastoutbytes; /* a second ago */
156 u_long inrate, outrate; /* highest rate seen */
157 u_long inlast; /* last input N secs ago */
158 u_long out_deficit; /* output since last input */
159 u_long oerrors, ierrors[6];
160 u_long opackets, ipackets;
161 #endif /* NETGRAPH */
165 #define DOG_HOLDOFF 6 /* dog holds off for 6 secs */
166 #define QUITE_A_WHILE 300 /* 5 MINUTES */
167 #define LOTS_OF_PACKETS 100
168 #endif /* NETGRAPH */
171 * Baud Rate table for Sync Mode.
172 * Each entry consists of 3 elements:
173 * Baud Rate (x100) , TMC, BR
175 * Baud Rate = FCLK / TMC / 2^BR
176 * Baud table for Crystal freq. of 9.8304 Mhz
180 int target; /* target rate/100 */
181 int tmc_reg; /* TMC register value */
182 int br_reg; /* BR (BaudRateClk) selector */
184 /* Baudx100 TMC BR */
205 int sr_test_speed[] = {
211 SR_MCR_ETC0, /* ISA channel 0 */
212 SR_MCR_ETC1, /* ISA channel 1 */
213 SR_FECR_ETC0, /* PCI channel 0 */
214 SR_FECR_ETC1 /* PCI channel 1 */
218 devclass_t sr_devclass;
220 DECLARE_DUMMY_MODULE(if_sr);
221 MODULE_DEPEND(if_sr, sppp, 1, 1, 1);
223 MODULE_DEPEND(ng_sync_sr, netgraph, 1, 1, 1);
226 static void srintr(void *arg);
227 static void sr_xmit(struct sr_softc *sc);
229 static void srstart(struct ifnet *ifp);
230 static int srioctl(struct ifnet *ifp, u_long cmd, caddr_t data,
232 static void srwatchdog(struct ifnet *ifp);
234 static void srstart(struct sr_softc *sc);
235 static void srwatchdog(struct sr_softc *sc);
236 #endif /* NETGRAPH */
237 static int sr_packet_avail(struct sr_softc *sc, int *len, u_char *rxstat);
238 static void sr_copy_rxbuf(struct mbuf *m, struct sr_softc *sc, int len);
239 static void sr_eat_packet(struct sr_softc *sc, int single);
240 static void sr_get_packets(struct sr_softc *sc);
242 static void sr_up(struct sr_softc *sc);
243 static void sr_down(struct sr_softc *sc);
244 static void src_init(struct sr_hardc *hc);
245 static void sr_init_sca(struct sr_hardc *hc);
246 static void sr_init_msci(struct sr_softc *sc);
247 static void sr_init_rx_dmac(struct sr_softc *sc);
248 static void sr_init_tx_dmac(struct sr_softc *sc);
249 static void sr_dmac_intr(struct sr_hardc *hc, u_char isr);
250 static void sr_msci_intr(struct sr_hardc *hc, u_char isr);
251 static void sr_timer_intr(struct sr_hardc *hc, u_char isr);
254 static void sr_modemck(void *x);
257 static void sr_modemck(struct sr_softc *x);
258 #endif /* NETGRAPH */
261 static void ngsr_watchdog_frame(void * arg);
262 static void ngsr_init(void* ignored);
264 static ng_constructor_t ngsr_constructor;
265 static ng_rcvmsg_t ngsr_rcvmsg;
266 static ng_shutdown_t ngsr_rmnode;
267 static ng_newhook_t ngsr_newhook;
268 /*static ng_findhook_t ngsr_findhook; */
269 static ng_connect_t ngsr_connect;
270 static ng_rcvdata_t ngsr_rcvdata;
271 static ng_disconnect_t ngsr_disconnect;
273 static struct ng_type typestruct = {
289 static int ngsr_done_init = 0;
290 #endif /* NETGRAPH */
293 * Register the ports on the adapter.
294 * Fill in the info for each port.
296 * Attach each port to sppp and bpf.
300 sr_attach(device_t device)
309 #endif /* NETGRAPH */
310 int unit; /* index: channel w/in card */
312 hc = (struct sr_hardc *)device_get_softc(device);
313 MALLOC(sc, struct sr_softc *,
314 hc->numports * sizeof(struct sr_softc),
315 M_DEVBUF, M_WAITOK | M_ZERO);
321 * Get the TX clock direction and configuration. The default is a
322 * single external clock which is used by RX and TX.
324 switch(hc->cardtype) {
326 flags = device_get_flags(device);
328 if (sr_test_speed[0] > 0)
329 hc->sc[0].clk_cfg = SR_FLAGS_INT_CLK;
332 if (flags & SR_FLAGS_0_CLK_MSK)
334 (flags & SR_FLAGS_0_CLK_MSK)
335 >> SR_FLAGS_CLK_SHFT;
337 if (hc->numports == 2)
339 if (sr_test_speed[1] > 0)
340 hc->sc[0].clk_cfg = SR_FLAGS_INT_CLK;
343 if (flags & SR_FLAGS_1_CLK_MSK)
344 hc->sc[1].clk_cfg = (flags & SR_FLAGS_1_CLK_MSK)
345 >> (SR_FLAGS_CLK_SHFT +
346 SR_FLAGS_CLK_CHAN_SHFT);
349 fecrp = (u_int *)(hc->sca_base + SR_FECR);
351 for (pndx = 0; pndx < hc->numports; pndx++, sc++) {
354 intf_sw = fecr & SR_FECR_ID1 >> SR_FE_ID1_SHFT;
358 intf_sw = fecr & SR_FECR_ID0 >> SR_FE_ID0_SHFT;
362 if (sr_test_speed[pndx] > 0)
363 sc->clk_cfg = SR_FLAGS_INT_CLK;
375 sc->clk_cfg = SR_FLAGS_EXT_SEP_CLK;
379 sc->clk_cfg = SR_FLAGS_EXT_CLK;
388 * Report Card configuration information before we start configuring
389 * each channel on the card...
391 kprintf("src%d: %uK RAM (%d mempages) @ %08x-%08x, %u ports.\n",
392 hc->cunit, hc->memsize / 1024, hc->mempages,
393 (u_int)hc->mem_start, (u_int)hc->mem_end, hc->numports);
398 if (BUS_SETUP_INTR(device_get_parent(device), device, hc->res_irq,
400 &hc->intr_cookie, NULL) != 0)
404 * Now configure each port on the card.
406 for (unit = 0; unit < hc->numports; sc++, unit++) {
409 sc->unit = next_sc_unit;
411 sc->scachan = unit % NCHAN;
417 kprintf("sr%d: Adapter %d, port %d.\n",
418 sc->unit, hc->cunit, sc->subunit);
421 ifp = &sc->ifsppp.pp_if;
423 if_initname(ifp, "sr", sc->unit);
424 ifp->if_mtu = PP_MTU;
425 ifp->if_flags = IFF_POINTOPOINT | IFF_MULTICAST;
426 ifp->if_ioctl = srioctl;
427 ifp->if_start = srstart;
428 ifp->if_watchdog = srwatchdog;
430 sc->ifsppp.pp_flags = PP_KEEPALIVE;
431 sppp_attach((struct ifnet *)&sc->ifsppp);
432 if_attach(ifp, NULL);
434 bpfattach(ifp, DLT_PPP, PPP_HEADER_LEN);
437 * we have found a node, make sure our 'type' is availabe.
439 if (ngsr_done_init == 0) ngsr_init(NULL);
440 if (ng_make_node_common(&typestruct, &sc->node) != 0)
442 sc->node->private = sc;
443 callout_init(&sc->sr_timer);
444 sc->xmitq.ifq_maxlen = IFQ_MAXLEN;
445 sc->xmitq_hipri.ifq_maxlen = IFQ_MAXLEN;
446 ksprintf(sc->nodename, "%s%d", NG_SR_NODE_TYPE, sc->unit);
447 if (ng_name_node(sc->node, sc->nodename)) {
453 #endif /* NETGRAPH */
457 SRC_SET_OFF(hc->iobase);
462 sr_deallocate_resources(device);
467 sr_detach(device_t device)
469 device_t parent = device_get_parent(device);
470 struct sr_hardc *hc = device_get_softc(device);
472 if (hc->intr_cookie != NULL) {
473 if (BUS_TEARDOWN_INTR(parent, device,
474 hc->res_irq, hc->intr_cookie) != 0) {
475 kprintf("intr teardown failed.. continuing\n");
477 hc->intr_cookie = NULL;
480 /* XXX Stop the DMA. */
483 * deallocate any system resources we may have
484 * allocated on behalf of this driver.
486 FREE(hc->sc, M_DEVBUF);
488 hc->mem_start = NULL;
489 return (sr_deallocate_resources(device));
493 sr_allocate_ioport(device_t device, int rid, u_long size)
495 struct sr_hardc *hc = device_get_softc(device);
497 hc->rid_ioport = rid;
498 hc->res_ioport = bus_alloc_resource(device, SYS_RES_IOPORT,
499 &hc->rid_ioport, 0ul, ~0ul, size, RF_ACTIVE);
500 if (hc->res_ioport == NULL) {
506 sr_deallocate_resources(device);
511 sr_allocate_irq(device_t device, int rid, u_long size)
513 struct sr_hardc *hc = device_get_softc(device);
516 hc->res_irq = bus_alloc_resource_any(device, SYS_RES_IRQ,
517 &hc->rid_irq, RF_SHAREABLE|RF_ACTIVE);
518 if (hc->res_irq == NULL) {
524 sr_deallocate_resources(device);
529 sr_allocate_memory(device_t device, int rid, u_long size)
531 struct sr_hardc *hc = device_get_softc(device);
533 hc->rid_memory = rid;
534 hc->res_memory = bus_alloc_resource(device, SYS_RES_MEMORY,
535 &hc->rid_memory, 0ul, ~0ul, size, RF_ACTIVE);
536 if (hc->res_memory == NULL) {
542 sr_deallocate_resources(device);
547 sr_allocate_plx_memory(device_t device, int rid, u_long size)
549 struct sr_hardc *hc = device_get_softc(device);
551 hc->rid_plx_memory = rid;
552 hc->res_plx_memory = bus_alloc_resource(device, SYS_RES_MEMORY,
553 &hc->rid_plx_memory, 0ul, ~0ul, size, RF_ACTIVE);
554 if (hc->res_plx_memory == NULL) {
560 sr_deallocate_resources(device);
565 sr_deallocate_resources(device_t device)
567 struct sr_hardc *hc = device_get_softc(device);
569 if (hc->res_irq != 0) {
570 bus_deactivate_resource(device, SYS_RES_IRQ,
571 hc->rid_irq, hc->res_irq);
572 bus_release_resource(device, SYS_RES_IRQ,
573 hc->rid_irq, hc->res_irq);
576 if (hc->res_ioport != 0) {
577 bus_deactivate_resource(device, SYS_RES_IOPORT,
578 hc->rid_ioport, hc->res_ioport);
579 bus_release_resource(device, SYS_RES_IOPORT,
580 hc->rid_ioport, hc->res_ioport);
583 if (hc->res_memory != 0) {
584 bus_deactivate_resource(device, SYS_RES_MEMORY,
585 hc->rid_memory, hc->res_memory);
586 bus_release_resource(device, SYS_RES_MEMORY,
587 hc->rid_memory, hc->res_memory);
590 if (hc->res_plx_memory != 0) {
591 bus_deactivate_resource(device, SYS_RES_MEMORY,
592 hc->rid_plx_memory, hc->res_plx_memory);
593 bus_release_resource(device, SYS_RES_MEMORY,
594 hc->rid_plx_memory, hc->res_plx_memory);
595 hc->res_plx_memory = 0;
601 * N2 Interrupt Service Routine
603 * First figure out which SCA gave the interrupt.
605 * See if there is other interrupts pending.
606 * Repeat until there no interrupts remain.
611 struct sr_hardc *hc = (struct sr_hardc *)arg;
612 sca_regs *sca = hc->sca; /* MSCI register tree */
613 u_char isr0, isr1, isr2; /* interrupt statii captured */
616 kprintf("sr: srintr_hc(hc=%08x)\n", hc);
620 * Since multiple interfaces may share this interrupt, we must loop
621 * until no interrupts are still pending service.
625 * Read all three interrupt status registers from the N2
628 isr0 = SRC_GET8(hc->sca_base, sca->isr0);
629 isr1 = SRC_GET8(hc->sca_base, sca->isr1);
630 isr2 = SRC_GET8(hc->sca_base, sca->isr2);
633 * If all three registers returned 0, we've finished
634 * processing interrupts from this device, so we can quit
637 if ((isr0 | isr1 | isr2) == 0)
641 kprintf("src%d: srintr_hc isr0 %x, isr1 %x, isr2 %x\n",
643 unit, isr0, isr1, isr2);
645 hc->cunit, isr0, isr1, isr2);
646 #endif /* NETGRAPH */
650 * Now we can dispatch the interrupts. Since we don't expect
651 * either MSCI or timer interrupts, we'll test for DMA
652 * interrupts first...
654 if (isr1) /* DMA-initiated interrupt */
655 sr_dmac_intr(hc, isr1);
657 if (isr0) /* serial part IRQ? */
658 sr_msci_intr(hc, isr0);
660 if (isr2) /* timer-initiated interrupt */
661 sr_timer_intr(hc, isr2);
666 * This will only start the transmitter. It is assumed that the data
668 * It is normally called from srstart() or sr_dmac_intr().
671 sr_xmit(struct sr_softc *sc)
673 u_short cda_value; /* starting descriptor */
674 u_short eda_value; /* ending descriptor */
677 struct ifnet *ifp; /* O/S Network Services */
678 #endif /* NETGRAPH */
679 dmac_channel *dmac; /* DMA channel registers */
682 kprintf("sr: sr_xmit( sc=%08x)\n", sc);
687 ifp = &sc->ifsppp.pp_if;
688 #endif /* NETGRAPH */
689 dmac = &hc->sca->dmac[DMAC_TXCH(sc->scachan)];
692 * Get the starting and ending addresses of the chain to be
693 * transmitted and pass these on to the DMA engine on-chip.
695 cda_value = sc->block[sc->txb_next_tx].txdesc + hc->mem_pstart;
696 cda_value &= 0x00ffff;
697 eda_value = sc->block[sc->txb_next_tx].txeda + hc->mem_pstart;
698 eda_value &= 0x00ffff;
700 SRC_PUT16(hc->sca_base, dmac->cda, cda_value);
701 SRC_PUT16(hc->sca_base, dmac->eda, eda_value);
704 * Now we'll let the DMA status register know about this change
706 SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE);
708 sc->xmit_busy = 1; /* mark transmitter busy */
711 kprintf("sr%d: XMIT cda=%04x, eda=%4x, rcda=%08lx\n",
712 sc->unit, cda_value, eda_value,
713 sc->block[sc->txb_next_tx].txdesc + hc->mem_pstart);
716 sc->txb_next_tx++; /* update next transmit seq# */
718 if (sc->txb_next_tx == SR_TX_BLOCKS) /* handle wrap... */
723 * Finally, we'll set a timout (which will start srwatchdog())
724 * within the O/S network services layer...
726 ifp->if_timer = 2; /* Value in seconds. */
729 * Don't time out for a while.
731 sc->out_dog = DOG_HOLDOFF; /* give ourself some breathing space*/
732 #endif /* NETGRAPH */
736 * This function will be called from the upper level when a user add a
737 * packet to be send, and from the interrupt handler after a finished
740 * This function only place the data in the oncard buffers. It does not
741 * start the transmition. sr_xmit() does that.
743 * Transmitter idle state is indicated by the IFF_OACTIVE flag.
744 * The function that clears that should ensure that the transmitter
745 * and its DMA is in a "good" idle state.
749 srstart(struct ifnet *ifp)
751 struct sr_softc *sc; /* channel control structure */
754 srstart(struct sr_softc *sc)
756 #endif /* NETGRAPH */
757 struct sr_hardc *hc; /* card control/config block */
758 int len; /* total length of a packet */
759 int pkts; /* packets placed in DPRAM */
760 int tlen; /* working length of pkt */
762 struct mbuf *mtx; /* message buffer from O/S */
763 u_char *txdata; /* buffer address in DPRAM */
764 sca_descriptor *txdesc; /* working descriptor pointr */
765 struct buf_block *blkp;
769 kprintf("sr: srstart( ifp=%08x)\n", ifp);
772 if ((ifp->if_flags & IFF_RUNNING) == 0)
774 #endif /* NETGRAPH */
777 * It is OK to set the memory window outside the loop because all tx
778 * buffers and descriptors are assumed to be in the same 16K window.
781 SRC_SET_ON(hc->iobase);
782 SRC_SET_MEM(hc->iobase, sc->block[0].txdesc);
786 * Loop to place packets into DPRAM.
788 * We stay in this loop until there is nothing in
789 * the TX queue left or the tx buffers are full.
794 * See if we have space for more packets.
796 if (sc->txb_inuse == SR_TX_BLOCKS) { /* out of space? */
798 ifp->if_flags |= IFF_OACTIVE; /* yes, mark active */
800 /*ifp->if_flags |= IFF_OACTIVE;*/ /* yes, mark active */
801 #endif /* NETGRAPH */
804 SRC_SET_OFF(hc->iobase);
807 kprintf("sr%d.srstart: sc->txb_inuse=%d; DPRAM full...\n",
808 sc->unit, sc->txb_inuse);
813 * OK, the card can take more traffic. Let's see if there's any
814 * pending from the system...
817 * The architecture of the networking interface doesn't
818 * actually call us like 'write()', providing an address. We get
819 * started, a lot like a disk strategy routine, and we actually call
820 * back out to the system to get traffic to send...
823 * If we were gonna run through another layer, we would use a
824 * dispatch table to select the service we're getting a packet
828 mtx = sppp_dequeue(ifp);
830 IF_DEQUEUE(&sc->xmitq_hipri, mtx);
832 IF_DEQUEUE(&sc->xmitq, mtx);
834 #endif /* NETGRAPH */
837 SRC_SET_OFF(hc->iobase);
841 * OK, we got a packet from the network services of the O/S. Now we
842 * can move it into the DPRAM (under control of the descriptors) and
846 i = 0; /* counts # of granules used */
848 blkp = &sc->block[sc->txb_new]; /* address of free granule */
849 txdesc = (sca_descriptor *)
850 (hc->mem_start + (blkp->txdesc & hc->winmsk));
852 txdata = (u_char *)(hc->mem_start
853 + (blkp->txstart & hc->winmsk));
856 * Now we'll try to install as many packets as possible into the
857 * card's DP RAM buffers.
859 for (;;) { /* perform actual copy of packet */
860 len = mtx->m_pkthdr.len; /* length of message */
863 kprintf("sr%d.srstart: mbuf @ %08lx, %d bytes\n",
871 #endif /* NETGRAPH */
874 * We can perform a straight copy because the tranmit
875 * buffers won't wrap.
877 m_copydata(mtx, 0, len, txdata);
880 * Now we know how big the message is gonna be. We must now
881 * construct the descriptors to drive this message out...
884 while (tlen > SR_BUF_SIZ) { /* loop for full granules */
885 txdesc->stat = 0; /* reset bits */
886 txdesc->len = SR_BUF_SIZ; /* size of granule */
889 txdesc++; /* move to next dscr */
890 txdata += SR_BUF_SIZ; /* adjust data addr */
895 * This section handles the setting of the final piece of a
898 txdesc->stat = SCA_DESC_EOM;
903 * prepare for subsequent packets (if any)
906 txdata += SR_BUF_SIZ; /* next mem granule */
907 i++; /* count of granules */
910 * OK, we've now placed the message into the DPRAM where it
911 * can be transmitted. We'll now release the message memory
912 * and update the statistics...
916 ++sc->ifsppp.pp_if.if_opackets;
919 #endif /* NETGRAPH */
922 * Check if we have space for another packet. XXX This is
923 * hardcoded. A packet can't be larger than 3 buffers (3 x
926 if ((i + 3) >= blkp->txmax) { /* enough remains? */
928 kprintf("sr%d.srstart: i=%d (%d pkts); card full.\n",
934 * We'll pull the next message to be sent (if any)
937 mtx = sppp_dequeue(ifp);
939 IF_DEQUEUE(&sc->xmitq_hipri, mtx);
941 IF_DEQUEUE(&sc->xmitq, mtx);
943 #endif /* NETGRAPH */
944 if (!mtx) { /* no message? We're done! */
946 kprintf("sr%d.srstart: pending=0, pkts=%d\n",
953 blkp->txtail = i; /* record next free granule */
956 * Mark the last descriptor, so that the SCA know where to stop.
958 txdesc--; /* back up to last descriptor in list */
959 txdesc->stat |= SCA_DESC_EOT; /* mark as end of list */
962 * Now we'll reset the transmit granule's descriptor address so we
963 * can record this in the structure and fire it off w/ the DMA
964 * processor of the serial chip...
966 txdesc = (sca_descriptor *)blkp->txdesc;
967 blkp->txeda = (u_short)((u_int)&txdesc[i]);
969 sc->txb_inuse++; /* update inuse status */
970 sc->txb_new++; /* new traffic wuz added */
972 if (sc->txb_new == SR_TX_BLOCKS)
976 * If the tranmitter wasn't marked as "busy" we will force it to be
979 if (sc->xmit_busy == 0) {
982 kprintf("sr%d.srstart: called sr_xmit()\n", sc->unit);
990 * Handle ioctl's at the device level, though we *will* call up
994 static int bug_splats[] = {0, 0, 0, 0, 0, 0, 0, 0};
998 srioctl(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
1000 int error, was_up, should_be_up;
1001 struct sr_softc *sc = ifp->if_softc;
1004 kprintf("%s: srioctl(ifp=%08x, cmd=%08x, data=%08x)\n",
1005 ifp->if_xname, ifp, cmd, data);
1008 was_up = ifp->if_flags & IFF_RUNNING;
1010 error = sppp_ioctl(ifp, cmd, data);
1013 kprintf("%s: ioctl: ifsppp.pp_flags = %08x, if_flags %08x.\n",
1014 ifp->if_xname, ((struct sppp *)ifp)->pp_flags, ifp->if_flags);
1020 if ((cmd != SIOCSIFFLAGS) && (cmd != SIOCSIFADDR)) {
1022 if (bug_splats[sc->unit]++ < 2) {
1023 kprintf("sr(%d).if_addrlist = %08x\n",
1024 sc->unit, ifp->if_addrlist);
1025 kprintf("sr(%d).if_bpf = %08x\n",
1026 sc->unit, ifp->if_bpf);
1027 kprintf("sr(%d).if_init = %08x\n",
1028 sc->unit, ifp->if_init);
1029 kprintf("sr(%d).if_output = %08x\n",
1030 sc->unit, ifp->if_output);
1031 kprintf("sr(%d).if_start = %08x\n",
1032 sc->unit, ifp->if_start);
1033 kprintf("sr(%d).if_done = %08x\n",
1034 sc->unit, ifp->if_done);
1035 kprintf("sr(%d).if_ioctl = %08x\n",
1036 sc->unit, ifp->if_ioctl);
1037 kprintf("sr(%d).if_reset = %08x\n",
1038 sc->unit, ifp->if_reset);
1039 kprintf("sr(%d).if_watchdog = %08x\n",
1040 sc->unit, ifp->if_watchdog);
1048 should_be_up = ifp->if_flags & IFF_RUNNING;
1050 if (!was_up && should_be_up) {
1052 * Interface should be up -- start it.
1058 * XXX Clear the IFF_UP flag so that the link will only go
1059 * up after sppp lcp and ipcp negotiation.
1061 /* ifp->if_flags &= ~IFF_UP; */
1062 } else if (was_up && !should_be_up) {
1064 * Interface should be down -- stop it.
1074 #endif /* NETGRAPH */
1077 * This is to catch lost tx interrupts.
1081 srwatchdog(struct ifnet *ifp)
1083 srwatchdog(struct sr_softc *sc)
1084 #endif /* NETGRAPH */
1086 int got_st0, got_st1, got_st3, got_dsr;
1088 struct sr_softc *sc = ifp->if_softc;
1089 #endif /* NETGRAPH */
1090 struct sr_hardc *hc = sc->hc;
1091 msci_channel *msci = &hc->sca->msci[sc->scachan];
1092 dmac_channel *dmac = &sc->hc->sca->dmac[sc->scachan];
1096 kprintf("srwatchdog(unit=%d)\n", unit);
1098 kprintf("srwatchdog(unit=%d)\n", sc->unit);
1099 #endif /* NETGRAPH */
1103 if (!(ifp->if_flags & IFF_RUNNING))
1106 ifp->if_oerrors++; /* update output error count */
1107 #else /* NETGRAPH */
1108 sc->oerrors++; /* update output error count */
1109 #endif /* NETGRAPH */
1111 got_st0 = SRC_GET8(hc->sca_base, msci->st0);
1112 got_st1 = SRC_GET8(hc->sca_base, msci->st1);
1113 got_st3 = SRC_GET8(hc->sca_base, msci->st3);
1114 got_dsr = SRC_GET8(hc->sca_base, dmac->dsr);
1118 if (ifp->if_flags & IFF_DEBUG)
1120 kprintf("sr%d: transmit failed, "
1121 #else /* NETGRAPH */
1122 kprintf("sr%d: transmit failed, "
1123 #endif /* NETGRAPH */
1124 "ST0 %02x, ST1 %02x, ST3 %02x, DSR %02x.\n",
1126 got_st0, got_st1, got_st3, got_dsr);
1128 if (SRC_GET8(hc->sca_base, msci->st1) & SCA_ST1_UDRN) {
1129 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXABORT);
1130 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXENABLE);
1131 SRC_PUT8(hc->sca_base, msci->st1, SCA_ST1_UDRN);
1135 ifp->if_flags &= ~IFF_OACTIVE;
1137 /*ifp->if_flags &= ~IFF_OACTIVE; */
1138 #endif /* NETGRAPH */
1140 if (sc->txb_inuse && --sc->txb_inuse)
1144 srstart(ifp); /* restart transmitter */
1146 srstart(sc); /* restart transmitter */
1147 #endif /* NETGRAPH */
1151 sr_up(struct sr_softc *sc)
1154 struct sr_hardc *hc = sc->hc;
1155 sca_regs *sca = hc->sca;
1156 msci_channel *msci = &sca->msci[sc->scachan];
1159 kprintf("sr_up(sc=%08x)\n", sc);
1163 * Enable transmitter and receiver. Raise DTR and RTS. Enable
1166 * XXX What about using AUTO mode in msci->md0 ???
1168 SRC_PUT8(hc->sca_base, msci->ctl,
1169 SRC_GET8(hc->sca_base, msci->ctl) & ~SCA_CTL_RTS);
1171 if (sc->scachan == 0)
1172 switch (hc->cardtype) {
1174 outb(hc->iobase + SR_MCR,
1175 (inb(hc->iobase + SR_MCR) & ~SR_MCR_DTR0));
1178 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1179 *fecrp &= ~SR_FECR_DTR0;
1183 switch (hc->cardtype) {
1185 outb(hc->iobase + SR_MCR,
1186 (inb(hc->iobase + SR_MCR) & ~SR_MCR_DTR1));
1189 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1190 *fecrp &= ~SR_FECR_DTR1;
1194 if (sc->scachan == 0) {
1195 SRC_PUT8(hc->sca_base, sca->ier0,
1196 SRC_GET8(hc->sca_base, sca->ier0) | 0x000F);
1197 SRC_PUT8(hc->sca_base, sca->ier1,
1198 SRC_GET8(hc->sca_base, sca->ier1) | 0x000F);
1200 SRC_PUT8(hc->sca_base, sca->ier0,
1201 SRC_GET8(hc->sca_base, sca->ier0) | 0x00F0);
1202 SRC_PUT8(hc->sca_base, sca->ier1,
1203 SRC_GET8(hc->sca_base, sca->ier1) | 0x00F0);
1206 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXENABLE);
1207 inb(hc->iobase); /* XXX slow it down a bit. */
1208 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXENABLE);
1212 if (sr_watcher == 0)
1215 #else /* NETGRAPH */
1216 callout_reset(&sc->sr_timer, hz, ngsr_watchdog_frame, sc);
1218 #endif /* NETGRAPH */
1222 sr_down(struct sr_softc *sc)
1225 struct sr_hardc *hc = sc->hc;
1226 sca_regs *sca = hc->sca;
1227 msci_channel *msci = &sca->msci[sc->scachan];
1230 kprintf("sr_down(sc=%08x)\n", sc);
1233 callout_stop(&sc->sr_timer);
1235 #endif /* NETGRAPH */
1238 * Disable transmitter and receiver. Lower DTR and RTS. Disable
1241 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXDISABLE);
1242 inb(hc->iobase); /* XXX slow it down a bit. */
1243 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_TXDISABLE);
1245 SRC_PUT8(hc->sca_base, msci->ctl,
1246 SRC_GET8(hc->sca_base, msci->ctl) | SCA_CTL_RTS);
1248 if (sc->scachan == 0)
1249 switch (hc->cardtype) {
1251 outb(hc->iobase + SR_MCR,
1252 (inb(hc->iobase + SR_MCR) | SR_MCR_DTR0));
1255 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1256 *fecrp |= SR_FECR_DTR0;
1260 switch (hc->cardtype) {
1262 outb(hc->iobase + SR_MCR,
1263 (inb(hc->iobase + SR_MCR) | SR_MCR_DTR1));
1266 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1267 *fecrp |= SR_FECR_DTR1;
1271 if (sc->scachan == 0) {
1272 SRC_PUT8(hc->sca_base, sca->ier0,
1273 SRC_GET8(hc->sca_base, sca->ier0) & ~0x0F);
1274 SRC_PUT8(hc->sca_base, sca->ier1,
1275 SRC_GET8(hc->sca_base, sca->ier1) & ~0x0F);
1277 SRC_PUT8(hc->sca_base, sca->ier0,
1278 SRC_GET8(hc->sca_base, sca->ier0) & ~0xF0);
1279 SRC_PUT8(hc->sca_base, sca->ier1,
1280 SRC_GET8(hc->sca_base, sca->ier1) & ~0xF0);
1285 * Initialize the card, allocate memory for the sr_softc structures
1286 * and fill in the pointers.
1289 src_init(struct sr_hardc *hc)
1291 struct sr_softc *sc = hc->sc;
1299 kprintf("src_init(hc=%08x)\n", hc);
1302 chanmem = hc->memsize / hc->numports;
1305 for (x = 0; x < hc->numports; x++, sc++) {
1308 for (blk = 0; blk < SR_TX_BLOCKS; blk++) {
1309 sc->block[blk].txdesc = next;
1310 bufmem = (16 * 1024) / SR_TX_BLOCKS;
1311 descneeded = bufmem / SR_BUF_SIZ;
1313 sc->block[blk].txstart = sc->block[blk].txdesc
1314 + ((((descneeded * sizeof(sca_descriptor))
1318 sc->block[blk].txend = next + bufmem;
1319 sc->block[blk].txmax =
1320 (sc->block[blk].txend - sc->block[blk].txstart)
1325 kprintf("sr%d: blk %d: txdesc %08x, txstart %08x\n",
1327 sc->block[blk].txdesc, sc->block[blk].txstart);
1332 bufmem = chanmem - (bufmem * SR_TX_BLOCKS);
1333 descneeded = bufmem / SR_BUF_SIZ;
1334 sc->rxstart = sc->rxdesc +
1335 ((((descneeded * sizeof(sca_descriptor)) /
1336 SR_BUF_SIZ) + 1) * SR_BUF_SIZ);
1337 sc->rxend = next + bufmem;
1338 sc->rxmax = (sc->rxend - sc->rxstart) / SR_BUF_SIZ;
1344 * The things done here are channel independent.
1346 * Configure the sca waitstates.
1347 * Configure the global interrupt registers.
1348 * Enable master dma enable.
1351 sr_init_sca(struct sr_hardc *hc)
1353 sca_regs *sca = hc->sca;
1356 kprintf("sr_init_sca(hc=%08x)\n", hc);
1360 * Do the wait registers. Set everything to 0 wait states.
1362 SRC_PUT8(hc->sca_base, sca->pabr0, 0);
1363 SRC_PUT8(hc->sca_base, sca->pabr1, 0);
1364 SRC_PUT8(hc->sca_base, sca->wcrl, 0);
1365 SRC_PUT8(hc->sca_base, sca->wcrm, 0);
1366 SRC_PUT8(hc->sca_base, sca->wcrh, 0);
1369 * Configure the interrupt registers. Most are cleared until the
1370 * interface is configured.
1372 SRC_PUT8(hc->sca_base, sca->ier0, 0x00); /* MSCI interrupts. */
1373 SRC_PUT8(hc->sca_base, sca->ier1, 0x00); /* DMAC interrupts */
1374 SRC_PUT8(hc->sca_base, sca->ier2, 0x00); /* TIMER interrupts. */
1375 SRC_PUT8(hc->sca_base, sca->itcr, 0x00); /* Use ivr and no intr
1377 SRC_PUT8(hc->sca_base, sca->ivr, 0x40); /* Interrupt vector. */
1378 SRC_PUT8(hc->sca_base, sca->imvr, 0x40);
1381 * Configure the timers. XXX Later
1385 * Set the DMA channel priority to rotate between all four channels.
1387 * Enable all dma channels.
1389 SRC_PUT8(hc->sca_base, sca->pcr, SCA_PCR_PR2);
1390 SRC_PUT8(hc->sca_base, sca->dmer, SCA_DMER_EN);
1394 * Configure the msci
1396 * NOTE: The serial port configuration is hardcoded at the moment.
1399 sr_init_msci(struct sr_softc *sc)
1401 int portndx; /* on-board port number */
1402 u_int mcr_v; /* contents of modem control */
1403 u_int *fecrp; /* pointer for PCI's MCR i/o */
1404 struct sr_hardc *hc = sc->hc;
1405 msci_channel *msci = &hc->sca->msci[sc->scachan];
1406 #ifdef N2_TEST_SPEED
1407 int br_v; /* contents for BR divisor */
1408 int etcndx; /* index into ETC table */
1409 int fifo_v, gotspeed; /* final tabled speed found */
1410 int tmc_v; /* timer control register */
1411 int wanted; /* speed (bitrate) wanted... */
1412 struct rate_line *rtp;
1415 portndx = sc->scachan;
1418 kprintf("sr: sr_init_msci( sc=%08x)\n", sc);
1421 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RESET);
1422 SRC_PUT8(hc->sca_base, msci->md0, SCA_MD0_CRC_1 |
1424 SCA_MD0_CRC_ENABLE |
1426 SRC_PUT8(hc->sca_base, msci->md1, SCA_MD1_NOADDRCHK);
1427 SRC_PUT8(hc->sca_base, msci->md2, SCA_MD2_DUPLEX | SCA_MD2_NRZ);
1430 * According to the manual I should give a reset after changing the
1433 SRC_PUT8(hc->sca_base, msci->cmd, SCA_CMD_RXRESET);
1434 SRC_PUT8(hc->sca_base, msci->ctl, SCA_CTL_IDLPAT |
1439 * XXX Later we will have to support different clock settings.
1441 switch (sc->clk_cfg) {
1444 kprintf("sr%: clk_cfg=%08x, selected default clock.\n",
1445 portndx, sc->clk_cfg);
1448 case SR_FLAGS_EXT_CLK:
1450 * For now all interfaces are programmed to use the RX clock
1455 kprintf("sr%d: External Clock Selected.\n", portndx);
1458 SRC_PUT8(hc->sca_base, msci->rxs,
1459 SCA_RXS_CLK_RXC0 | SCA_RXS_DIV1);
1460 SRC_PUT8(hc->sca_base, msci->txs,
1461 SCA_TXS_CLK_RX | SCA_TXS_DIV1);
1464 case SR_FLAGS_EXT_SEP_CLK:
1466 kprintf("sr%d: Split Clocking Selected.\n", portndx);
1469 SRC_PUT8(hc->sca_base, msci->rxs,
1470 SCA_RXS_CLK_RXC0 | SCA_RXS_DIV1);
1471 SRC_PUT8(hc->sca_base, msci->txs,
1472 SCA_TXS_CLK_TXC | SCA_TXS_DIV1);
1475 case SR_FLAGS_INT_CLK:
1477 kprintf("sr%d: Internal Clocking selected.\n", portndx);
1481 * XXX I do need some code to set the baud rate here!
1483 #ifdef N2_TEST_SPEED
1484 switch (hc->cardtype) {
1486 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1492 mcr_v = inb(hc->iobase + SR_MCR);
1496 fifo_v = 0x10; /* stolen from Linux version */
1499 * search for appropriate speed in table, don't calc it:
1501 wanted = sr_test_speed[portndx];
1502 rtp = &n2_rates[0]; /* point to first table item */
1504 while ((rtp->target > 0) /* search table for speed */
1505 &&(rtp->target != wanted))
1509 * We've searched the table for a matching speed. If we've
1510 * found the correct rate line, we'll get the pre-calc'd
1511 * values for the TMC and baud rate divisor for subsequent
1514 if (rtp->target > 0) { /* use table-provided values */
1516 tmc_v = rtp->tmc_reg;
1518 } else { /* otherwise assume 1MBit comm rate */
1525 * Now we mask in the enable clock output for the MCR:
1527 mcr_v |= etc0vals[etcndx + portndx];
1530 * Now we'll program the registers with these speed- related
1533 SRC_PUT8(hc->sca_base, msci->tmc, tmc_v);
1534 SRC_PUT8(hc->sca_base, msci->trc0, fifo_v);
1535 SRC_PUT8(hc->sca_base, msci->rxs, SCA_RXS_CLK_INT + br_v);
1536 SRC_PUT8(hc->sca_base, msci->txs, SCA_TXS_CLK_INT + br_v);
1538 switch (hc->cardtype) {
1544 outb(hc->iobase + SR_MCR, mcr_v);
1548 if (wanted != gotspeed)
1549 kprintf("sr%d: Speed wanted=%d, found=%d\n",
1552 kprintf("sr%d: Internal Clock %dx100 BPS, tmc=%d, div=%d\n",
1553 portndx, gotspeed, tmc_v, br_v);
1556 SRC_PUT8(hc->sca_base, msci->rxs,
1557 SCA_RXS_CLK_INT | SCA_RXS_DIV1);
1558 SRC_PUT8(hc->sca_base, msci->txs,
1559 SCA_TXS_CLK_INT | SCA_TXS_DIV1);
1561 SRC_PUT8(hc->sca_base, msci->tmc, 5);
1564 switch (hc->cardtype) {
1566 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1567 *fecrp |= SR_FECR_ETC0;
1571 mcr_v = inb(hc->iobase + SR_MCR);
1572 mcr_v |= SR_MCR_ETC0;
1573 outb(hc->iobase + SR_MCR, mcr_v);
1576 switch (hc->cardtype) {
1578 mcr_v = inb(hc->iobase + SR_MCR);
1579 mcr_v |= SR_MCR_ETC1;
1580 outb(hc->iobase + SR_MCR, mcr_v);
1583 fecrp = (u_int *)(hc->sca_base + SR_FECR);
1584 *fecrp |= SR_FECR_ETC1;
1591 * XXX Disable all interrupts for now. I think if you are using the
1592 * dmac you don't use these interrupts.
1594 SRC_PUT8(hc->sca_base, msci->ie0, 0);
1595 SRC_PUT8(hc->sca_base, msci->ie1, 0x0C);
1596 SRC_PUT8(hc->sca_base, msci->ie2, 0);
1597 SRC_PUT8(hc->sca_base, msci->fie, 0);
1599 SRC_PUT8(hc->sca_base, msci->sa0, 0);
1600 SRC_PUT8(hc->sca_base, msci->sa1, 0);
1602 SRC_PUT8(hc->sca_base, msci->idl, 0x7E); /* set flags value */
1604 SRC_PUT8(hc->sca_base, msci->rrc, 0x0E);
1605 SRC_PUT8(hc->sca_base, msci->trc0, 0x10);
1606 SRC_PUT8(hc->sca_base, msci->trc1, 0x1F);
1610 * Configure the rx dma controller.
1613 sr_init_rx_dmac(struct sr_softc *sc)
1615 struct sr_hardc *hc;
1617 sca_descriptor *rxd;
1618 u_int cda_v, sarb_v, rxbuf, rxda, rxda_d;
1621 kprintf("sr_init_rx_dmac(sc=%08x)\n", sc);
1625 dmac = &hc->sca->dmac[DMAC_RXCH(sc->scachan)];
1628 SRC_SET_MEM(hc->iobase, sc->rxdesc);
1631 * This phase initializes the contents of the descriptor table
1632 * needed to construct a circular buffer...
1634 rxd = (sca_descriptor *)(hc->mem_start + (sc->rxdesc & hc->winmsk));
1635 rxda_d = (u_int) hc->mem_start - (sc->rxdesc & ~hc->winmsk);
1637 for (rxbuf = sc->rxstart;
1639 rxbuf += SR_BUF_SIZ, rxd++) {
1641 * construct the circular chain...
1643 rxda = (u_int) & rxd[1] - rxda_d + hc->mem_pstart;
1644 rxd->cp = (u_short)(rxda & 0xffff);
1647 * set the on-card buffer address...
1649 rxd->bp = (u_short)((rxbuf + hc->mem_pstart) & 0xffff);
1650 rxd->bpb = (u_char)(((rxbuf + hc->mem_pstart) >> 16) & 0xff);
1652 rxd->len = 0; /* bytes resident w/in granule */
1653 rxd->stat = 0xff; /* The sca write here when finished */
1657 * heal the chain so that the last entry points to the first...
1660 rxd->cp = (u_short)((sc->rxdesc + hc->mem_pstart) & 0xffff);
1663 * reset the reception handler's index...
1668 * We'll now configure the receiver's DMA logic...
1670 SRC_PUT8(hc->sca_base, dmac->dsr, 0); /* Disable DMA transfer */
1671 SRC_PUT8(hc->sca_base, dmac->dcr, SCA_DCR_ABRT);
1673 /* XXX maybe also SCA_DMR_CNTE */
1674 SRC_PUT8(hc->sca_base, dmac->dmr, SCA_DMR_TMOD | SCA_DMR_NF);
1675 SRC_PUT16(hc->sca_base, dmac->bfl, SR_BUF_SIZ);
1677 cda_v = (u_short)((sc->rxdesc + hc->mem_pstart) & 0xffff);
1678 sarb_v = (u_char)(((sc->rxdesc + hc->mem_pstart) >> 16) & 0xff);
1680 SRC_PUT16(hc->sca_base, dmac->cda, cda_v);
1681 SRC_PUT8(hc->sca_base, dmac->sarb, sarb_v);
1683 rxd = (sca_descriptor *)sc->rxstart;
1685 SRC_PUT16(hc->sca_base, dmac->eda,
1686 (u_short)((u_int) & rxd[sc->rxmax - 1] & 0xffff));
1688 SRC_PUT8(hc->sca_base, dmac->dir, 0xF0);
1691 SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE); /* Enable DMA */
1695 * Configure the TX DMA descriptors.
1696 * Initialize the needed values and chain the descriptors.
1699 sr_init_tx_dmac(struct sr_softc *sc)
1702 u_int txbuf, txda, txda_d;
1703 struct sr_hardc *hc;
1704 sca_descriptor *txd;
1706 struct buf_block *blkp;
1711 kprintf("sr_init_tx_dmac(sc=%08x)\n", sc);
1715 dmac = &hc->sca->dmac[DMAC_TXCH(sc->scachan)];
1718 SRC_SET_MEM(hc->iobase, sc->block[0].txdesc);
1721 * Initialize the array of descriptors for transmission
1723 for (blk = 0; blk < SR_TX_BLOCKS; blk++) {
1724 blkp = &sc->block[blk];
1725 txd = (sca_descriptor *)(hc->mem_start
1726 + (blkp->txdesc & hc->winmsk));
1727 txda_d = (u_int) hc->mem_start
1728 - (blkp->txdesc & ~hc->winmsk);
1731 txbuf = blkp->txstart;
1732 for (; txbuf < blkp->txend; txbuf += SR_BUF_SIZ, txd++) {
1733 txda = (u_int) & txd[1] - txda_d + hc->mem_pstart;
1734 txd->cp = (u_short)(txda & 0xffff);
1736 txd->bp = (u_short)((txbuf + hc->mem_pstart)
1738 txd->bpb = (u_char)(((txbuf + hc->mem_pstart) >> 16)
1746 txd->cp = (u_short)((blkp->txdesc + hc->mem_pstart)
1749 blkp->txtail = (u_int)txd - (u_int)hc->mem_start;
1752 SRC_PUT8(hc->sca_base, dmac->dsr, 0); /* Disable DMA */
1753 SRC_PUT8(hc->sca_base, dmac->dcr, SCA_DCR_ABRT);
1754 SRC_PUT8(hc->sca_base, dmac->dmr, SCA_DMR_TMOD | SCA_DMR_NF);
1755 SRC_PUT8(hc->sca_base, dmac->dir,
1756 SCA_DIR_EOT | SCA_DIR_BOF | SCA_DIR_COF);
1758 sarb_v = (sc->block[0].txdesc + hc->mem_pstart) >> 16;
1761 SRC_PUT8(hc->sca_base, dmac->sarb, (u_char) sarb_v);
1765 * Look through the descriptors to see if there is a complete packet
1766 * available. Stop if we get to where the sca is busy.
1768 * Return the length and status of the packet.
1769 * Return nonzero if there is a packet available.
1772 * It seems that we get the interrupt a bit early. The updateing of
1773 * descriptor values is not always completed when this is called.
1776 sr_packet_avail(struct sr_softc *sc, int *len, u_char *rxstat)
1778 int granules; /* count of granules in pkt */
1780 struct sr_hardc *hc;
1781 sca_descriptor *rxdesc; /* current descriptor */
1782 sca_descriptor *endp; /* ending descriptor */
1783 sca_descriptor *cda; /* starting descriptor */
1785 hc = sc->hc; /* get card's information */
1788 * set up starting descriptor by pulling that info from the DMA half
1791 wki = DMAC_RXCH(sc->scachan);
1792 wko = SRC_GET16(hc->sca_base, hc->sca->dmac[wki].cda);
1794 cda = (sca_descriptor *)(hc->mem_start + (wko & hc->winmsk));
1797 kprintf("sr_packet_avail(): wki=%d, wko=%04x, cda=%08x\n",
1802 * open the appropriate memory window and set our expectations...
1805 SRC_SET_MEM(hc->iobase, sc->rxdesc);
1806 SRC_SET_ON(hc->iobase);
1808 rxdesc = (sca_descriptor *)
1809 (hc->mem_start + (sc->rxdesc & hc->winmsk));
1811 rxdesc = &rxdesc[sc->rxhind];
1812 endp = &endp[sc->rxmax];
1814 *len = 0; /* reset result total length */
1815 granules = 0; /* reset count of granules */
1818 * This loop will scan descriptors, but it *will* puke up if we wrap
1819 * around to our starting point...
1821 while (rxdesc != cda) {
1822 *len += rxdesc->len; /* increment result length */
1826 * If we hit a valid packet's completion we'll know we've
1827 * got a live one, and that we can deliver the packet.
1828 * Since we're only allowed to report a packet available,
1829 * somebody else does that...
1831 if (rxdesc->stat & SCA_DESC_EOM) { /* End Of Message */
1832 *rxstat = rxdesc->stat; /* return closing */
1834 kprintf("sr%d: PKT AVAIL len %d, %x, bufs %u.\n",
1835 sc->unit, *len, *rxstat, granules);
1837 return 1; /* indicate success */
1840 * OK, this packet take up multiple granules. Move on to
1841 * the next descriptor so we can consider it...
1845 if (rxdesc == endp) /* recognize & act on wrap point */
1846 rxdesc = (sca_descriptor *)
1847 (hc->mem_start + (sc->rxdesc & hc->winmsk));
1851 * Nothing found in the DPRAM. Let the caller know...
1860 * Copy a packet from the on card memory into a provided mbuf.
1861 * Take into account that buffers wrap and that a packet may
1862 * be larger than a buffer.
1865 sr_copy_rxbuf(struct mbuf *m, struct sr_softc *sc, int len)
1867 struct sr_hardc *hc;
1868 sca_descriptor *rxdesc;
1875 kprintf("sr_copy_rxbuf(m=%08x,sc=%08x,len=%d)\n",
1881 rxdata = sc->rxstart + (sc->rxhind * SR_BUF_SIZ);
1882 rxmax = sc->rxstart + (sc->rxmax * SR_BUF_SIZ);
1884 rxdesc = (sca_descriptor *)
1885 (hc->mem_start + (sc->rxdesc & hc->winmsk));
1886 rxdesc = &rxdesc[sc->rxhind];
1889 * Using the count of bytes in the received packet, we decrement it
1890 * for each granule (controller by an SCA descriptor) to control the
1895 * tlen gets the length of *this* granule... ...which is
1896 * then copied to the target buffer.
1898 tlen = (len < SR_BUF_SIZ) ? len : SR_BUF_SIZ;
1901 SRC_SET_MEM(hc->iobase, rxdata);
1903 bcopy(hc->mem_start + (rxdata & hc->winmsk),
1904 mtod(m, caddr_t) +off,
1911 * now, return to the descriptor's window in DPRAM and reset
1912 * the descriptor we've just suctioned...
1915 SRC_SET_MEM(hc->iobase, sc->rxdesc);
1918 rxdesc->stat = 0xff;
1921 * Move on to the next granule. If we've any remaining
1922 * bytes to process we'll just continue in our loop...
1924 rxdata += SR_BUF_SIZ;
1927 if (rxdata == rxmax) { /* handle the wrap point */
1928 rxdata = sc->rxstart;
1929 rxdesc = (sca_descriptor *)
1930 (hc->mem_start + (sc->rxdesc & hc->winmsk));
1936 * If single is set, just eat a packet. Otherwise eat everything up to
1937 * where cda points. Update pointers to point to the next packet.
1939 * This handles "flushing" of a packet as received...
1941 * If the "single" parameter is zero, all pending reeceive traffic will
1942 * be flushed out of existence. A non-zero value will only drop the
1943 * *next* (currently) pending packet...
1946 sr_eat_packet(struct sr_softc *sc, int single)
1948 struct sr_hardc *hc;
1949 sca_descriptor *rxdesc; /* current descriptor being eval'd */
1950 sca_descriptor *endp; /* last descriptor in chain */
1951 sca_descriptor *cda; /* current start point */
1952 u_int loopcnt = 0; /* count of packets flushed ??? */
1953 u_char stat; /* captured status byte from descr */
1956 cda = (sca_descriptor *)(hc->mem_start +
1957 (SRC_GET16(hc->sca_base,
1958 hc->sca->dmac[DMAC_RXCH(sc->scachan)].cda) &
1962 * loop until desc->stat == (0xff || EOM) Clear the status and
1963 * length in the descriptor. Increment the descriptor.
1966 SRC_SET_MEM(hc->iobase, sc->rxdesc);
1968 rxdesc = (sca_descriptor *)
1969 (hc->mem_start + (sc->rxdesc & hc->winmsk));
1971 rxdesc = &rxdesc[sc->rxhind];
1972 endp = &endp[sc->rxmax];
1975 * allow loop, but abort it if we wrap completely...
1977 while (rxdesc != cda) {
1980 if (loopcnt > sc->rxmax) {
1981 kprintf("sr%d: eat pkt %d loop, cda %x, "
1982 "rxdesc %x, stat %x.\n",
1983 sc->unit, loopcnt, (u_int) cda, (u_int) rxdesc,
1987 stat = rxdesc->stat;
1990 rxdesc->stat = 0xff;
1995 if (rxdesc == endp) {
1996 rxdesc = (sca_descriptor *)
1997 (hc->mem_start + (sc->rxdesc & hc->winmsk));
2000 if (single && (stat == SCA_DESC_EOM))
2005 * Update the eda to the previous descriptor.
2007 rxdesc = (sca_descriptor *)sc->rxdesc;
2008 rxdesc = &rxdesc[(sc->rxhind + sc->rxmax - 2) % sc->rxmax];
2010 SRC_PUT16(hc->sca_base,
2011 hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda,
2012 (u_short)((u_int)(rxdesc + hc->mem_pstart) & 0xffff));
2016 * While there is packets available in the rx buffer, read them out
2017 * into mbufs and ship them off.
2020 sr_get_packets(struct sr_softc *sc)
2022 u_char rxstat; /* acquired status byte */
2024 int pkts; /* count of packets found */
2025 int rxndx; /* rcv buffer index */
2026 int tries; /* settling time counter */
2027 u_int len; /* length of pending packet */
2028 struct sr_hardc *hc; /* card-level information */
2029 sca_descriptor *rxdesc; /* descriptor in memory */
2031 struct ifnet *ifp; /* network intf ctl table */
2032 #endif /* NETGRAPH */
2033 struct mbuf *m = NULL; /* message buffer */
2036 kprintf("sr_get_packets(sc=%08x)\n", sc);
2041 ifp = &sc->ifsppp.pp_if;
2042 #endif /* NETGRAPH */
2045 SRC_SET_MEM(hc->iobase, sc->rxdesc);
2046 SRC_SET_ON(hc->iobase); /* enable shared memory */
2048 pkts = 0; /* reset count of found packets */
2051 * for each complete packet in the receiving pool, process each
2054 while (sr_packet_avail(sc, &len, &rxstat)) { /* packet pending? */
2056 * I have seen situations where we got the interrupt but the
2057 * status value wasn't deposited. This code should allow
2058 * the status byte's value to settle...
2063 while ((rxstat == 0x00ff)
2065 sr_packet_avail(sc, &len, &rxstat);
2068 kprintf("sr_packet_avail() returned len=%d, rxstat=%02ux\n",
2076 #endif /* NETGRAPH */
2079 * OK, we've settled the incoming message status. We can now
2082 if (((rxstat & SCA_DESC_ERRORS) == 0) && (len < MCLBYTES)) {
2084 kprintf("sr%d: sr_get_packet() rxstat=%02x, len=%d\n",
2085 sc->unit, rxstat, len);
2088 MGETHDR(m, MB_DONTWAIT, MT_DATA);
2091 * eat (flush) packet if get mbuf fail!!
2093 sr_eat_packet(sc, 1);
2097 * construct control information for pass-off
2100 m->m_pkthdr.rcvif = ifp;
2102 m->m_pkthdr.rcvif = NULL;
2103 #endif /* NETGRAPH */
2104 m->m_pkthdr.len = m->m_len = len;
2106 MCLGET(m, MB_DONTWAIT);
2107 if ((m->m_flags & M_EXT) == 0) {
2109 * We couldn't get a big enough
2110 * message packet, so we'll send the
2111 * packet to /dev/null...
2114 sr_eat_packet(sc, 1);
2119 * OK, we've got a good message buffer. Now we can
2120 * copy the received message into it
2122 sr_copy_rxbuf(m, sc, len); /* copy from DPRAM */
2132 kprintf("sr%d: rcvd=%02x%02x%02x%02x%02x%02x\n",
2134 bp[0], bp[1], bp[2],
2135 bp[4], bp[5], bp[6]);
2141 #else /* NETGRAPH */
2146 bp = mtod(m,u_char *);
2147 kprintf("sr%d: rd=%02x:%02x:%02x:%02x:%02x:%02x",
2149 bp[0], bp[1], bp[2],
2150 bp[4], bp[5], bp[6]);
2151 kprintf(":%02x:%02x:%02x:%02x:%02x:%02x\n",
2152 bp[6], bp[7], bp[8],
2153 bp[9], bp[10], bp[11]);
2156 ng_queue_data(sc->hook, m, NULL);
2158 #endif /* NETGRAPH */
2160 * Update the eda to the previous descriptor.
2162 i = (len + SR_BUF_SIZ - 1) / SR_BUF_SIZ;
2163 sc->rxhind = (sc->rxhind + i) % sc->rxmax;
2165 rxdesc = (sca_descriptor *)sc->rxdesc;
2166 rxndx = (sc->rxhind + sc->rxmax - 2) % sc->rxmax;
2167 rxdesc = &rxdesc[rxndx];
2169 SRC_PUT16(hc->sca_base,
2170 hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda,
2171 (u_short)((u_int)(rxdesc + hc->mem_pstart)
2175 int got_st3, got_cda, got_eda;
2178 while ((rxstat == 0xff) && --tries)
2179 sr_packet_avail(sc, &len, &rxstat);
2182 * It look like we get an interrupt early
2183 * sometimes and then the status is not
2186 if (tries && (tries != 5))
2190 * This chunk of code handles the error packets.
2191 * We'll log them for posterity...
2193 sr_eat_packet(sc, 1);
2199 #endif /* NETGRAPH */
2201 got_st3 = SRC_GET8(hc->sca_base,
2202 hc->sca->msci[sc->scachan].st3);
2203 got_cda = SRC_GET16(hc->sca_base,
2204 hc->sca->dmac[DMAC_RXCH(sc->scachan)].cda);
2205 got_eda = SRC_GET16(hc->sca_base,
2206 hc->sca->dmac[DMAC_RXCH(sc->scachan)].eda);
2209 kprintf("sr%d: Receive error chan %d, "
2210 "stat %02x, msci st3 %02x,"
2211 "rxhind %d, cda %04x, eda %04x.\n",
2212 sc->unit, sc->scachan, rxstat,
2213 got_st3, sc->rxhind, got_cda, got_eda);
2219 kprintf("sr%d: sr_get_packets() found %d packet(s)\n",
2224 SRC_SET_OFF(hc->iobase);
2228 * All DMA interrupts come here.
2230 * Each channel has two interrupts.
2231 * Interrupt A for errors and Interrupt B for normal stuff like end
2232 * of transmit or receive dmas.
2235 sr_dmac_intr(struct sr_hardc *hc, u_char isr1)
2237 u_char dsr; /* contents of DMA Stat Reg */
2238 u_char dotxstart; /* enables for tranmit part */
2239 int mch; /* channel being processed */
2240 struct sr_softc *sc; /* channel's softc structure */
2241 sca_regs *sca = hc->sca;
2242 dmac_channel *dmac; /* dma structure of chip */
2245 kprintf("sr_dmac_intr(hc=%08x,isr1=%04x)\n", hc, isr1);
2248 mch = 0; /* assume chan0 on card */
2249 dotxstart = isr1; /* copy for xmitter starts */
2252 * Shortcut if there is no interrupts for dma channel 0 or 1.
2253 * Skip processing for channel 0 if no incoming hit
2255 if ((isr1 & 0x0F) == 0) {
2263 * Transmit channel - DMA Status Register Evaluation
2266 dmac = &sca->dmac[DMAC_TXCH(mch)];
2269 * get the DMA Status Register contents and write
2270 * back to reset interrupt...
2272 dsr = SRC_GET8(hc->sca_base, dmac->dsr);
2273 SRC_PUT8(hc->sca_base, dmac->dsr, dsr);
2276 * Check for (& process) a Counter overflow
2278 if (dsr & SCA_DSR_COF) {
2279 kprintf("sr%d: TX DMA Counter overflow, "
2280 "txpacket no %lu.\n",
2282 sc->unit, sc->ifsppp.pp_if.if_opackets);
2283 sc->ifsppp.pp_if.if_oerrors++;
2285 sc->unit, sc->opackets);
2287 #endif /* NETGRAPH */
2290 * Check for (& process) a Buffer overflow
2292 if (dsr & SCA_DSR_BOF) {
2293 kprintf("sr%d: TX DMA Buffer overflow, "
2294 "txpacket no %lu, dsr %02x, "
2295 "cda %04x, eda %04x.\n",
2297 sc->unit, sc->ifsppp.pp_if.if_opackets,
2299 sc->unit, sc->opackets,
2300 #endif /* NETGRAPH */
2302 SRC_GET16(hc->sca_base, dmac->cda),
2303 SRC_GET16(hc->sca_base, dmac->eda));
2305 sc->ifsppp.pp_if.if_oerrors++;
2308 #endif /* NETGRAPH */
2311 * Check for (& process) an End of Transfer (OK)
2313 if (dsr & SCA_DSR_EOT) {
2315 * This should be the most common case.
2317 * Clear the IFF_OACTIVE flag.
2319 * Call srstart to start a new transmit if
2320 * there is data to transmit.
2323 kprintf("sr%d: TX Completed OK\n", sc->unit);
2327 sc->ifsppp.pp_if.if_flags &= ~IFF_OACTIVE;
2328 sc->ifsppp.pp_if.if_timer = 0;
2330 /* XXX may need to mark tx inactive? */
2332 sc->out_dog = DOG_HOLDOFF;
2333 #endif /* NETGRAPH */
2335 if (sc->txb_inuse && --sc->txb_inuse)
2340 * Receive channel processing of DMA Status Register
2343 dmac = &sca->dmac[DMAC_RXCH(mch)];
2345 dsr = SRC_GET8(hc->sca_base, dmac->dsr);
2346 SRC_PUT8(hc->sca_base, dmac->dsr, dsr);
2349 * End of frame processing (MSG OK?)
2351 if (dsr & SCA_DSR_EOM) {
2356 tt = sc->ifsppp.pp_if.if_ipackets;
2357 #else /* NETGRAPH */
2359 #endif /* NETGRAPH */
2366 if (tt == sc->ifsppp.pp_if.if_ipackets)
2367 #else /* NETGRAPH */
2368 if (tt == sc->ipackets)
2369 #endif /* NETGRAPH */
2371 sca_descriptor *rxdesc;
2374 kprintf("SR: RXINTR isr1 %x, dsr %x, "
2375 "no data %d pkts, orxind %d.\n",
2376 dotxstart, dsr, tt, ind);
2377 kprintf("SR: rxdesc %x, rxstart %x, "
2378 "rxend %x, rxhind %d, "
2380 sc->rxdesc, sc->rxstart,
2381 sc->rxend, sc->rxhind,
2383 kprintf("SR: cda %x, eda %x.\n",
2384 SRC_GET16(hc->sca_base, dmac->cda),
2385 SRC_GET16(hc->sca_base, dmac->eda));
2388 SRC_SET_ON(hc->iobase);
2389 SRC_SET_MEM(hc->iobase, sc->rxdesc);
2391 rxdesc = (sca_descriptor *)
2393 (sc->rxdesc & hc->winmsk));
2394 rxdesc = &rxdesc[sc->rxhind];
2396 for (i = 0; i < 3; i++, rxdesc++)
2397 kprintf("SR: rxdesc->stat %x, "
2403 SRC_SET_OFF(hc->iobase);
2408 * Check for Counter overflow
2410 if (dsr & SCA_DSR_COF) {
2411 kprintf("sr%d: RX DMA Counter overflow, "
2414 sc->unit, sc->ifsppp.pp_if.if_ipackets);
2415 sc->ifsppp.pp_if.if_ierrors++;
2416 #else /* NETGRAPH */
2417 sc->unit, sc->ipackets);
2419 #endif /* NETGRAPH */
2422 * Check for Buffer overflow
2424 if (dsr & SCA_DSR_BOF) {
2425 kprintf("sr%d: RX DMA Buffer overflow, "
2426 "rxpkts %lu, rxind %d, "
2427 "cda %x, eda %x, dsr %x.\n",
2429 sc->unit, sc->ifsppp.pp_if.if_ipackets,
2430 #else /* NETGRAPH */
2431 sc->unit, sc->ipackets,
2432 #endif /* NETGRAPH */
2434 SRC_GET16(hc->sca_base, dmac->cda),
2435 SRC_GET16(hc->sca_base, dmac->eda),
2439 * Make sure we eat as many as possible.
2440 * Then get the system running again.
2443 SRC_SET_ON(hc->iobase);
2445 sr_eat_packet(sc, 0);
2447 sc->ifsppp.pp_if.if_ierrors++;
2448 #else /* NETGRAPH */
2450 #endif /* NETGRAPH */
2452 SRC_PUT8(hc->sca_base,
2456 SRC_PUT8(hc->sca_base, dmac->dsr, SCA_DSR_DE);
2459 kprintf("sr%d: RX DMA Buffer overflow, "
2460 "rxpkts %lu, rxind %d, "
2461 "cda %x, eda %x, dsr %x. After\n",
2465 #else /* NETGRAPH */
2466 sc->ifsppp.pp_if.if_ipackets,
2467 #endif /* NETGRAPH */
2469 SRC_GET16(hc->sca_base, dmac->cda),
2470 SRC_GET16(hc->sca_base, dmac->eda),
2471 SRC_GET8(hc->sca_base, dmac->dsr));
2475 SRC_SET_OFF(hc->iobase);
2480 if (dsr & SCA_DSR_EOT) {
2482 * If this happen, it means that we are
2483 * receiving faster than what the processor
2486 * XXX We should enable the dma again.
2488 kprintf("sr%d: RX End of xfer, rxpkts %lu.\n",
2491 sc->ifsppp.pp_if.if_ipackets);
2492 sc->ifsppp.pp_if.if_ierrors++;
2496 #endif /* NETGRAPH */
2499 isr1 >>= 4; /* process next half of ISR */
2500 mch++; /* and move to next channel */
2501 } while ((mch < NCHAN) && isr1); /* loop for each chn */
2504 * Now that we have done all the urgent things, see if we can fill
2505 * the transmit buffers.
2507 for (mch = 0; mch < NCHAN; mch++) {
2508 if (dotxstart & 0x0C) { /* TX initiation enabled? */
2511 srstart(&sc->ifsppp.pp_if);
2514 #endif /* NETGRAPH */
2516 dotxstart >>= 4;/* shift for next channel */
2522 * Perform timeout on an FR channel
2524 * Establish a periodic check of open N2 ports; If
2525 * a port is open/active, its DCD state is checked
2526 * and a loss of DCD is recognized (and eventually
2530 sr_modemck(void *arg)
2532 int card; /* card index in table */
2533 int cards; /* card list index */
2534 int mch; /* channel on card */
2535 u_char dcd_v; /* Data Carrier Detect */
2536 u_char got_st0; /* contents of ST0 */
2537 u_char got_st1; /* contents of ST1 */
2538 u_char got_st2; /* contents of ST2 */
2539 u_char got_st3; /* contents of ST3 */
2540 struct sr_hardc *hc; /* card's configuration */
2541 struct sr_hardc *Card[16];/* up to 16 cards in system */
2542 struct sr_softc *sc; /* channel's softc structure */
2543 struct ifnet *ifp; /* interface control table */
2544 msci_channel *msci; /* regs specific to channel */
2549 if (sr_opens == 0) { /* count of "up" channels */
2550 sr_watcher = 0; /* indicate no watcher */
2558 sr_watcher = 1; /* mark that we're online */
2561 * Now we'll need a list of cards to process. Since we can handle
2562 * both ISA and PCI cards (and I didn't think of making this logic
2563 * global YET) we'll generate a single table of card table
2568 for (card = 0; card < NSR; card++) {
2569 hc = &sr_hardc[card];
2571 if (hc->sc == (void *)0)
2585 * OK, we've got work we can do. Let's do it... (Please note that
2586 * this code _only_ deals w/ ISA cards)
2588 for (card = 0; card < cards; card++) {
2589 hc = Card[card];/* get card table */
2591 for (mch = 0; mch < hc->numports; mch++) {
2594 ifp = &sc->ifsppp.pp_if;
2597 * if this channel isn't "up", skip it
2599 if ((ifp->if_flags & IFF_UP) == 0)
2603 * OK, now we can go looking at this channel's
2604 * actual register contents...
2606 msci = &hc->sca->msci[sc->scachan];
2609 * OK, now we'll look into the actual status of this
2612 * I suck in more registers than strictly needed
2614 got_st0 = SRC_GET8(hc->sca_base, msci->st0);
2615 got_st1 = SRC_GET8(hc->sca_base, msci->st1);
2616 got_st2 = SRC_GET8(hc->sca_base, msci->st2);
2617 got_st3 = SRC_GET8(hc->sca_base, msci->st3);
2620 * We want to see if the DCD signal is up (DCD is
2623 dcd_v = (got_st3 & SCA_ST3_DCD) == 0;
2626 kprintf("sr%d: DCD lost\n", sc->unit);
2631 * OK, now set up for the next modem signal checking pass...
2633 timeout(sr_modemck, NULL, hz);
2638 #else /* NETGRAPH */
2640 * If a port is open/active, it's DCD state is checked
2641 * and a loss of DCD is recognized (and eventually processed?).
2644 sr_modemck(struct sr_softc *sc )
2646 u_char got_st3; /* contents of ST3 */
2647 struct sr_hardc *hc = sc->hc; /* card's configuration */
2648 msci_channel *msci; /* regs specific to channel */
2652 if (sc->running == 0) {
2658 * OK, now we can go looking at this channel's register contents...
2660 msci = &hc->sca->msci[sc->scachan];
2661 got_st3 = SRC_GET8(hc->sca_base, msci->st3);
2664 * We want to see if the DCD signal is up (DCD is true if zero)
2666 sc->dcd = (got_st3 & SCA_ST3_DCD) == 0;
2671 #endif /* NETGRAPH */
2673 sr_msci_intr(struct sr_hardc *hc, u_char isr0)
2675 kprintf("src%d: SRINTR: MSCI\n", hc->cunit);
2679 sr_timer_intr(struct sr_hardc *hc, u_char isr2)
2681 kprintf("src%d: SRINTR: TIMER\n", hc->cunit);
2685 /*****************************************
2686 * Device timeout/watchdog routine.
2687 * called once per second.
2688 * checks to see that if activity was expected, that it hapenned.
2689 * At present we only look to see if expected output was completed.
2692 ngsr_watchdog_frame(void * arg)
2694 struct sr_softc * sc = arg;
2699 if (sc->running == 0) {
2701 return; /* if we are not running let timeouts die */
2704 * calculate the apparent throughputs
2708 speed = sc->inbytes - sc->lastinbytes;
2709 sc->lastinbytes = sc->inbytes;
2710 if ( sc->inrate < speed )
2712 speed = sc->outbytes - sc->lastoutbytes;
2713 sc->lastoutbytes = sc->outbytes;
2714 if ( sc->outrate < speed )
2715 sc->outrate = speed;
2720 if ((sc->inlast > QUITE_A_WHILE)
2721 && (sc->out_deficit > LOTS_OF_PACKETS)) {
2722 log(LOG_ERR, "sr%d: No response from remote end\n", sc->unit);
2728 sc->inlast = sc->out_deficit = 0;
2731 } else if ( sc->xmit_busy ) { /* no TX -> no TX timeouts */
2732 if (sc->out_dog == 0) {
2733 log(LOG_ERR, "sr%d: Transmit failure.. no clock?\n",
2746 sc->inlast = sc->out_deficit = 0;
2751 sr_modemck(sc); /* update the DCD status */
2752 callout_reset(&sc->sr_timer, hz, ngsr_watchdog_frame, sc);
2755 /***********************************************************************
2756 * This section contains the methods for the Netgraph interface
2757 ***********************************************************************/
2759 * It is not possible or allowable to create a node of this type.
2760 * If the hardware exists, it will already have created it.
2763 ngsr_constructor(node_p *nodep)
2769 * give our ok for a hook to be added...
2770 * If we are not running this should kick the device into life.
2771 * The hook's private info points to our stash of info about that
2775 ngsr_newhook(node_p node, hook_p hook, const char *name)
2777 struct sr_softc * sc = node->private;
2780 * check if it's our friend the debug hook
2782 if (strcmp(name, NG_SR_HOOK_DEBUG) == 0) {
2783 hook->private = NULL; /* paranoid */
2784 sc->debug_hook = hook;
2789 * Check for raw mode hook.
2791 if (strcmp(name, NG_SR_HOOK_RAW) != 0) {
2802 * incoming messages.
2803 * Just respond to the generic TEXT_STATUS message
2806 ngsr_rcvmsg(node_p node,
2807 struct ng_mesg *msg, const char *retaddr, struct ng_mesg **resp)
2809 struct sr_softc * sc;
2813 switch (msg->header.typecookie) {
2817 case NGM_GENERIC_COOKIE:
2818 switch(msg->header.cmd) {
2819 case NGM_TEXT_STATUS: {
2822 int resplen = sizeof(struct ng_mesg) + 512;
2823 MALLOC(*resp, struct ng_mesg *, resplen,
2824 M_NETGRAPH, M_INTWAIT | M_ZERO);
2825 if (*resp == NULL) {
2829 arg = (*resp)->data;
2832 * Put in the throughput information.
2834 pos = ksprintf(arg, "%ld bytes in, %ld bytes out\n"
2835 "highest rate seen: %ld B/S in, %ld B/S out\n",
2836 sc->inbytes, sc->outbytes,
2837 sc->inrate, sc->outrate);
2838 pos += ksprintf(arg + pos,
2839 "%ld output errors\n",
2841 pos += ksprintf(arg + pos,
2842 "ierrors = %ld, %ld, %ld, %ld, %ld, %ld\n",
2850 (*resp)->header.version = NG_VERSION;
2851 (*resp)->header.arglen = strlen(arg) + 1;
2852 (*resp)->header.token = msg->header.token;
2853 (*resp)->header.typecookie = NG_SR_COOKIE;
2854 (*resp)->header.cmd = msg->header.cmd;
2855 strncpy((*resp)->header.cmdstr, "status",
2868 kfree(msg, M_NETGRAPH);
2873 * get data from another node and transmit it to the correct channel
2876 ngsr_rcvdata(hook_p hook, struct mbuf *m, meta_p meta)
2879 struct sr_softc * sc = hook->node->private;
2880 struct ifqueue *xmitq_p;
2883 * data doesn't come in from just anywhere (e.g control hook)
2885 if ( hook->private == NULL) {
2891 * Now queue the data for when it can be sent
2893 if (meta && meta->priority > 0) {
2894 xmitq_p = (&sc->xmitq_hipri);
2896 xmitq_p = (&sc->xmitq);
2901 if (IF_QFULL(xmitq_p)) {
2909 IF_ENQUEUE(xmitq_p, m);
2918 * It was an error case.
2919 * check if we need to free the mbuf, and then return the error
2921 NG_FREE_DATA(m, meta);
2926 * do local shutdown processing..
2927 * this node will refuse to go away, unless the hardware says to..
2928 * don't unref the node, or remove our name. just clear our links up.
2931 ngsr_rmnode(node_p node)
2933 struct sr_softc * sc = node->private;
2937 node->flags &= ~NG_INVALID; /* bounce back to life */
2941 /* already linked */
2943 ngsr_connect(hook_p hook)
2945 /* be really amiable and just say "YUP that's OK by me! " */
2950 * notify on hook disconnection (destruction)
2952 * Invalidate the private data associated with this dlci.
2953 * For this type, removal of the last link resets tries to destroy the node.
2954 * As the device still exists, the shutdown method will not actually
2955 * destroy the node, but reset the device and leave it 'fresh' :)
2957 * The node removal code will remove all references except that owned by the
2961 ngsr_disconnect(hook_p hook)
2963 struct sr_softc * sc = hook->node->private;
2965 * If it's the data hook, then free resources etc.
2967 if (hook->private) {
2971 if (sc->datahooks == 0)
2976 sc->debug_hook = NULL;
2982 * called during bootup
2983 * or LKM loading to put this type into the list of known modules
2986 ngsr_init(void *ignored)
2988 if (ng_newtype(&typestruct))
2989 kprintf("ngsr install failed\n");
2992 #endif /* NETGRAPH */
2995 ********************************* END ************************************