1 2002-05-09 Anton Blanchard <anton@samba.org>
3 * ppc-opc.c: Add "tlbiel" for POWER4.
5 2002-05-09 Alan Modra <amodra@bigpond.net.au>
8 2002-05-01 Alan Modra <amodra@bigpond.net.au>
9 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
11 2002-04-17 matthew green <mrg@redhat.com>
12 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
14 2002-04-29 Chris Demetriou <cgd@broadcom.com>
17 2002-03-06 Chris Demetriou <cgd@broadcom.com>
18 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
22 2002-03-06 Chris Demetriou <cgd@broadcom.com>
23 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
26 2002-03-15 Chris Demetriou <cgd@broadcom.com>
27 * mips-dis.c (is_newabi): Fix ABI decoding.
29 2002-04-04 Alan Modra <amodra@bigpond.net.au>
31 * dep-in.sed: Cope with absolute paths.
32 * Makefile.am (dep.sed): Subst TOPDIR.
34 * Makefile.in: Regenerate.
37 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
38 * s390-dis.c (init_disasm): Use renamed architecture defines.
40 2002-03-28 Alan Modra <amodra@bigpond.net.au>
42 * aclocal.m4: Regenerate.
43 * config.in: Regenerate.
44 * configure: Regenerate.
45 * Makefile.am: Run "make dep-am".
46 * Makefile.in: Regenerate.
49 2002-03-23 matthew green <mrg@redhat.com>
50 * ppc-opc.c (vmaddfp): Fix operand order.
52 2002-03-21 Anton Blanchard <anton@samba.org>
53 * ppc-opc.c: Add optional field to mtmsrd.
54 (MTMSRD_L, XRLARB_MASK): Define.
56 2002-03-13 Alan Modra <amodra@bigpond.net.au>
57 * ppc-opc.c: Add optional `L' field to tlbie.
58 (XRTLRA_MASK): Define.
60 2002-02-20 Tom Rix <trix@redhat.com>
61 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
63 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
65 * configure.in (LINGUAS): Add de.po.
66 * configure: Regenerate.
69 Mon Feb 25 18:40:33 CET 2002 Jan Hubicka <jh@suse.cz>
71 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
73 (print_insn) Likewise.
74 (putop): Fix handling of 'E'
75 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
78 2002-02-25 Alan Modra <amodra@bigpond.net.au>
80 * ppc-dis.c (powerpc_dialect): Handle power4 option.
81 * ppc-opc.c (insert_bdm): Correct description of "at" branch
82 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
83 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
84 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
85 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
86 (PPCCOM32, PPCCOM64): Delete.
87 (NOPOWER4, POWER4): Define.
88 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
89 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
90 are enabled for power4 rather than ppc64.
92 Merge from mainline 2002-02-19 matthew green <mrg@redhat.com>
93 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
96 2002-02-15 Richard Henderson <rth@redhat.com>
98 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
101 2002-02-15 Richard Henderson <rth@redhat.com>
103 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
106 2002-02-13 Hans-Peter Nilsson <hp@bitrange.com>
108 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
109 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
111 * configure: Regenerate.
113 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
115 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
118 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
120 * cgen-dis.c: Add prototypes for count_decodable_bits
121 and add_insn_to_hash_chain.
123 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
125 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
126 * configure: Rebuilt.
128 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
130 * or32-opc.c: Fix compile time warning messages.
131 * or32-dis.c: Fix compile time warning messages.
133 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
136 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
137 * sh64-opc.c: Regenerate.
138 2001-03-13 DJ Delorie <dj@redhat.com>
139 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
140 purpose is more obvious.
141 * sh64-opc.c (shmedia_table): Ditto.
142 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
143 (print_insn_shmedia): Ditto.
144 2001-03-12 DJ Delorie <dj@redhat.com>
145 * sh64-opc.c: Adjust comments to reflect reality: replace bits
146 3:0 with zeros (not "reserved"), replace "rrrrrr" with
147 "gggggg" for two-operand floating point opcodes. Remove
149 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
150 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
151 Correct printing of .byte:s. Return number of printed bytes or
153 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
154 to next four-byte-alignment if insn or data is not aligned.
155 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
156 * sh64-dis.c: Update comments and fix comment formatting.
157 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
158 Abort instead of setting length to 0.
159 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
160 crange_bsearch_cmpl, sh64_get_contents_type,
161 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
162 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
163 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
164 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
165 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
166 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
167 address with same prefix as SHcompact.
168 In the disassembler, use a .cranges section for linked executables.
169 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
170 and update for using structure in info->private_data.
171 (struct sh64_disassemble_info): New.
172 (is_shmedia_p): Delete.
173 (crange_qsort_cmpb): New function.
174 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
175 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
176 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
177 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
178 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
179 pair. Display addresses for linked executables only.
180 (print_insn_sh64x_media): Initialize info->private_data by calling
181 init_sh64_disasm_info.
182 (print_insn_sh64x): Ditto. Find out type of contents by calling
183 sh64_contents_type_disasm. Display data regions using ".long" and
184 ".byte" similar to unrecognized opcodes.
185 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
186 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
187 information in section flags before considering symbols. Don't
188 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
189 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
190 matching $target $canon_targets instead of looking at the
191 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
192 * configure: Regenerate.
193 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
194 * sh64-opc.c (shmedia_creg_table): New.
195 * sh64-opc.h (shmedia_creg_info): New type.
196 (shmedia_creg_table): Declare.
197 * sh64-dis.c (creg_name): New function.
198 (print_insn_shmedia): Use it.
199 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
200 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
201 print_insn_sh64l if little-endian.
202 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
203 (print_insn_sh64l): New.
204 (print_insn_sh64x): New.
205 (print_insn_sh64x_media): New.
206 (print_insn_sh64): Break out code to print_insn_sh64x and
207 print_insn_sh64x_media.
208 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
209 * sh64-opc.h: New file
210 * sh64-opc.c: New file
211 * sh64-dis.c: New file
212 * Makefile.am: Add sh64 targets.
213 (HFILES): Add sh64-opc.h.
214 (CFILES): Add sh64-opc.c and sh64-dis.c.
215 (ALL_MACHINES): Add sh64 files.
216 * Makefile.in: Regenerate.
217 * configure.in: Add support for sh64 to bfd_sh_arch.
218 * configure: Regenerate.
219 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
220 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
222 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
223 * po/POTFILES.in: Regenerate.
224 * po/opcodes.pot: Regenerate.
226 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
228 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
230 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
232 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
234 2002-02-01 Alan Modra <amodra@bigpond.net.au>
236 * Makefile.am: Run "make dep-am"
237 * Makefile.in: Regenerate.
239 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
241 * or32-dis.c: New file.
242 * or32-opc.c: New file.
243 * configure.in: Add support for or32.
244 * configure: Regenerate.
245 * Makefile.am: Add support for or32.
246 * Makefile.in: Regenerate.
247 * disassemble.c: Add support for or32.
248 * po/POTFILES.in: Regenerate.
249 * po/opcodes.pot: Regenerate.
251 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
253 * configure: Regenerated.
255 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
257 * po/fr.po: Updated version.
259 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
261 * po/es.po: Updated version.
263 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
265 * po/da.po: New version.
267 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
269 * po/da.po: New file: Spanish translation.
270 * configure.in (ALL_LINGUAS): Add da.
271 * configure: Regenerate.
273 2002-01-22 Graydon Hoare <graydon@redhat.com>
275 * fr30-asm.c: Regenerate.
276 * fr30-desc.c: Likewise.
277 * fr30-desc.h: Likewise.
278 * fr30-dis.c: Likewise.
279 * fr30-ibld.c: Likewise.
280 * fr30-opc.c: Likewise.
281 * fr30-opc.h: Likewise.
282 * m32r-asm.c: Likewise.
283 * m32r-desc.c: Likewise.
284 * m32r-desc.h: Likewise.
285 * m32r-dis.c: Likewise.
286 * m32r-ibld.c: Likewise.
287 * m32r-opc.c: Likewise.
288 * m32r-opc.h: Likewise.
289 * m32r-opinst.c: Likewise.
290 * openrisc-asm.c: Likewise.
291 * openrisc-desc.c: Likewise.
292 * openrisc-desc.h: Likewise.
293 * openrisc-dis.c: Likewise.
294 * openrisc-ibld.c: Likewise.
295 * openrisc-opc.c: Likewise.
296 * openrisc-opc.h: Likewise.
297 * xstormy16-desc.c: Likewise.
299 2002-01-22 Richard Henderson <rth@redhat.com>
301 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
304 2002-01-22 Alan Modra <amodra@bigpond.net.au>
306 * Makefile.am: Run "make dep-am".
307 * Makefile.in: Regenerate.
308 * opcodes/po/POTFILES.in: Regenerate.
310 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
312 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
313 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
315 2002-01-18 Keith Walker <keith.walker@arm.com>
317 * arm-opc.h (arm_opcodes): Add bxj instruction.
319 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
321 * po/opcodes.pot: Regenerate.
322 * po/fr.po: Regenerate.
323 * po/sv.po: Regenerate.
324 * po/tr.po: Regenerate.
326 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
328 * po/tr.po: Import new version.
330 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
332 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
333 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
336 2002-01-10 matthew green <mrg@redhat.com>
338 * xstormy16-asm.c: Regenerate.
339 * xstormy16-desc.c: Likewise.
340 * xstormy16-desc.h: Likewise.
341 * xstormy16-dis.c: Likewise.
342 * xstormy16-opc.c: Likewise.
343 * xstormy16-opc.h: Likewise.
345 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
347 * po/es.po: New file: Spanish translation.
348 * configure.in (ALL_LINGUAS): Add es.
349 * configure: Regenerate.
351 2001-12-31 Jeffrey A Law (law@redhat.com)
353 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
354 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
355 Always emit a space after 'H'.
357 2001-12-18 matthew green <mrg@redhat.com>
359 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
361 2001-12-17 Richard Henderson <rth@redhat.com>
363 * alpha-opc.c (unop): Encode with RB as $sp.
365 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
367 * Makefile.am: Add support for xstormy16.
368 * Makefile.in: Regenerate.
369 * configure.in: Add support for xstormy16.
370 * configure: Regenerate.
371 * disassemble.c: Add support for xstormy16.
372 * xstormy16-asm.c: New generated file.
373 * xstormy16-desc.c: New generated file.
374 * xstormy16-desc.h: New generated file.
375 * xstormy16-dis.c: New generated file.
376 * xstormy16-ibld.c: New generated file.
377 * xstormy16-opc.c: New generated file.
378 * xstormy16-opc.h: New generated file.
380 2001-12-06 Richard Henderson <rth@redhat.com>
382 * alpha-opc.c (alpha_opcodes): Add wh64en.
384 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
386 * d10v-opc.c (d10v_predefined_registers): Remove warnings
387 introduced in Nov 29's patch.
389 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
392 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
395 * d10v-opc.c (RSRC_NOSP): New macro.
396 (d10v_operands): Add it.
397 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
399 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
401 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
402 (RSRC_SP): New macro.
403 (d10v_operands): Add it.
404 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
406 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
408 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
409 Also, break out of the loop as soon as an instruction has been
412 2001-11-17 matthew green <mrg@redhat.com>
414 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
416 2001-11-15 Alan Modra <amodra@bigpond.net.au>
418 * po/POTFILES.in: Regenerate.
420 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
421 (insert_bat, extract_bat, insert_bba, extract_bba,
422 insert_bd, extract_bd, insert_bdm, extract_bdm,
423 insert_bdp, extract_bdp, valid_bo,
424 insert_bo, extract_bo, insert_boe, extract_boe,
425 insert_ds, extract_ds, insert_de, extract_de,
426 insert_des, extract_des, insert_li, extract_li,
427 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
428 insert_nb, extract_nb, insert_nsi, extract_nsi,
429 insert_ral, insert_ram, insert_ras,
430 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
431 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
432 (extract_bd, extract_bdm, extract_bdp,
433 extract_ds, extract_des,
434 extract_li, extract_nsi): Implement sign extension without conditional.
435 (insert_bdm, extract_bdm,
436 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
437 (extract_bdm, extract_bdp): Correct 32 bit validation.
438 (AT1_MASK, AT2_MASK): Define.
439 (BBOAT_MASK): Define.
440 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
441 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
442 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
443 (PPCCOM32, PPCCOM64): Define.
444 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
445 and add new patterns to implement 64 bit branches with hints. Move
446 booke instructions so they match before ppc64.
448 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
449 64 bit default targets, and parse "32" and "64" in options.
451 (print_insn_powerpc): Pass dialect to operand->extract.
453 2001-11-14 Dave Brolley <brolley@redhat.com>
455 * cgen-dis.c (count_decodable_bits): New function.
456 (add_insn_to_hash_chain): New function.
457 (hash_insn_array): Call add_insn_to_hash_chain.
458 (hash_insn_list): Call add_insn_to_hash_chain.
459 * m32r-dis.c: Regenerated.
460 * fr30-dis.c: Regenerated.
462 2001-11-14 Andreas Jaeger <aj@suse.de>
464 * i386-dis.c (print_insn): Use x86-64 as option.
466 2001-11-14 Alan Modra <amodra@bigpond.net.au>
468 * disassemble.c (disassembler): Call print_insn_i386.
469 * i386-dis.c (SUFFIX_ALWAYS): Define.
470 (struct dis_private): Add orig_sizeflag.
471 (print_insn_i386): Make it a wrapper, calling..
472 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
473 warning without using volatile by moving orig_sizeflag to priv,
474 and removing inbuf. Parse disassembler_options.
475 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
477 (putop): Remove #ifdef SUFFIX_ALWAYS.
479 2001-11-11 Timothy Wall <twall@alum.mit.edu>
481 * tic54x-dis.c: Use revised opcode structure. Export opcode
483 (has_lkaddr): Don't forget about Lmem insns.
484 * tic54x-opc.c: Add emulation trap. Parallel table now uses
485 standard opcode templates.
487 2001-11-13 Zack Weinberg <zack@codesourcery.com>
489 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
490 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
491 category instead of Ew.
493 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
495 * m68k-opc.c: Fix definitions of wddata[bwl].
497 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
499 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
500 fit in the buffer, try to match the empty keyword.
502 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
504 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
505 * fr30-ibld.c: Regenerate.
506 * m32r-ibld.c: Regenerate.
507 * openrisc-ibld.c: Regenerate.
509 2001-11-04 Chris Demetriou <cgd@broadcom.com>
511 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
513 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
515 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
516 * configure: Regernate.
517 * po/fr.po: New file.
518 * po/sv.po: New file.
519 * po/tr.po: New file.
521 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
523 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
526 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
528 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
530 * Makefile.in: Regenerate.
531 * mmix-dis.c, mmix-opc.c: New files.
533 2001-10-29 Kazu Hirata <kazu@hxi.com>
535 * d30v-dis.c: Fix a comment typo.
537 2001-10-23 Chris Demetriou <cgd@broadcom.com>
539 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
540 "bltzall" as writing GPR 31 (since they do).
542 * mips-dis.c (print_insn_arg): Calculate info->target
544 (print_insn_mips): Fill in instruction info.
545 (print_mips16_insn_arg): Remove unneded variable 'val'.
546 Removed duplicated instruction target calculations,
547 calculate once and print that result. Use same idiom for
548 masking the jump segment bits as is used in print_insn_arg.
550 2001-10-20 Alan Modra <amodra@bigpond.net.au>
552 * ppc-opc.c (CT): Make it an optional operand.
554 2001-10-17 Chris Demetriou <cgd@broadcom.com>
556 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
557 SB-1 binaries include instructions specific to the SB-1.
558 * mips-opc.c (SB1): New definition.
559 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
560 "recip.ps", "rsqrt.ps", and "sqrt.ps".
562 2001-10-17 matthew green <mrg@redhat.com>
564 * ppc-opc.c (STRM): New AltiVec operand.
565 (XDSS): New AltiVec instruction form.
566 (mtvscr): Correct operand list.
567 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
569 2001-10-17 Alan Modra <amodra@bigpond.net.au>
571 * po/POTFILES.in: Regenerate.
573 2001-10-13 matthew green <mrg@redhat.com>
575 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
576 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
577 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
579 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
581 * cgen-ibld.in: Include safe-ctype.h in preference to
583 * cgen-asm.in: Include safe-ctype.h in preference to
584 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
585 TOLOWER instead of tolower.
586 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
587 string elements in constructed regular expression.
588 * fr30-asm.c: Regenerate.
589 * fr30-desc.c: Regenerate.
590 * fr30-ibld.c: Regenerate.
591 * m32r-asm.c: Regenerate.
592 * m32r-desc.c: Regenerate.
593 * m32r-ibld.c: Regenerate.
594 * openrisc-asm.c: Regenerate.
595 * openrisc-desc.c: Regenerate.
596 * openrisc-ibld.c: Regenerate.
597 * po/opcodes.pot: Regenerate.
599 2001-10-12 matthew green <mrg@redhat.com>
601 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
602 instruction field instruction/extraction functions for new BookE
603 DE form instructions.
604 (CT): New macro for CT field in an X form instruction.
605 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
607 (PPC64): Don't include PPC_OPCODE_PPC.
608 (403): New opcode macro for PPC403 processors.
609 (BOOKE): New opcode macro for BookE processors.
610 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
611 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
612 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
613 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
614 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
615 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
616 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
617 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
618 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
619 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
620 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
621 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
622 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
623 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
625 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
626 for a disassembler option of `booke', `booke32' or `booke64' to enable
627 BookE support in the disassembler.
629 2001-10-12 John Healy <jhealy@redhat.com>
631 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
632 for the length when extracting the base part of the insn.
634 2001-10-09 Bruno Haible <haible@clisp.cons.org>
636 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
637 regular expression. Fix some formatting problems.
638 * fr30-asm.c: Regenerate.
639 * openrisc-asm.c: Regenerate.
640 * m32r-asm.c: Regenerate.
642 2001-10-09 Christian Groessler <cpg@aladdin.de>
644 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
645 of indirect register memory accesses to be same format the
648 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
650 * sh-opc.h: Fix encoding of least significant nibble of the
651 DSP single data transfer instructions.
653 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
656 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
658 * cgen-asm.in: Fix compile time warning messages in generated
660 * cgen-dis.in: The same.
661 * cgen-ibld.in: The same.
662 * fr30-asm.c: Regenerate.
663 * fr30-desc.c: Regenerate.
664 * fr30-dis.c: Regenerate.
665 * fr30-ibld.c: Regenerate.
666 * fr30-opc.c: Regenerate.
667 * m32r-asm.c: Regenerate.
668 * m32r-desc.c: Regenerate.
669 * m32r-dis.c: Regenerate.
670 * m32r-ibld.c: Regenerate.
671 * m32r-opc.c: Regenerate.
672 * m32r-opinst.c Regenerate.
673 * openrisc-asm.c: Regenerate.
674 * openrisc-desc.c: Regenerate.
675 * openrisc-dis.c: Regenerate.
676 * openrisc-ibld.c: Regenerate.
677 * openrisc-opc.c: Regenerate.
678 * openrisc-opc.h: Regenerate.
679 * Makefile.in: Regenerate.
680 * po/POTFILES.in: Regenerate.
681 * po/opcodes.pot: Regenerate.
683 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
685 * arm-opc.h (arm_opcodes): Add cirrus insns.
687 * arm-dis.c (print_insn_arm): Add 'I' case.
689 2001-10-03 Alan Modra <amodra@bigpond.net.au>
691 * po/POTFILES.in: Regenerate.
692 * configure: Regenerate.
694 2001-10-02 Alan Modra <amodra@bigpond.net.au>
696 * Makefile.am (Makefile): Depend on bfd/configure.in.
698 * Makefile.in: Regenerate.
700 2001-09-30 John Healy <jhealy@redhat.com>
702 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
703 calls to cgen_get_insn_value and cgen_put_insn_value calls.
704 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
706 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
708 * Makefile.am: Update dependencies with "make dep-am".
709 * Makefile.in: Regenerate.
711 2001-09-26 Alan Modra <amodra@bigpond.net.au>
713 * arc-dis.c: Formatting fixes.
714 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
716 2001-09-21 Bruno Haible <haible@clisp.cons.org>
718 * arc-dis.c: Don't include <ctype.h>.
719 * openrisc-desc.c: Likewise.
720 * openrisc-ibld.c: Likewise.
722 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
724 * fr30-opc.c: Fix compile time warning messages.
725 * i370-opc.c: Fix compile time warning messages.
726 * i960-dis.c: Fix compile time warning messages.
727 * m32r-asm.c: Fix compile time warning messages.
728 * m32r-desc.c: Fix compile time warning messages.
729 * m32r-dis.c: Fix compile time warning messages.
730 * m32r-ibld.c: Fix compile time warning messages.
731 * m32r-opc.c: Fix compile time warning messages.
732 * m32r-opinst.c: Fix compile time warning messages.
733 * ns32k-dis.c: Fix compile time warning messages.
734 * openrisc-asm.c: Fix compile time warning messages.
735 * openrisc-desc.c: Fix compile time warning messages.
736 * openrisc-dis.c: Fix compile time warning messages.
737 * openrisc-ibld.c: Fix compile time warning messages.
738 * openrisc-opc.c: Fix compile time warning messages.
739 * pdp11-dis.c: Fix compile time warning messages.
740 * tic54x-dis.c: Fix compile time warning messages.
741 * v850-opc.c: Fix compile time warning messages.
742 * vax-dis.c: Fix compile time warning messages.
743 * w65-opc.h: Fix compile time warning messages.
744 * z8k-opc.h: Fix compile time warning messages.
745 * z8kgen.c: Fix compile time warning messages.
747 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
749 * arm-dis.c: Fix compile time warning messages.
750 * cgen-asm.c: Fix compile time warning messages.
751 * cgen-dis.c: Fix compile time warning messages.
752 * cris-dis.c: Fix compile time warning messages.
753 * d10v-dis.c: Fix compile time warning messages.
754 * fr30-asm.c: Fix compile time warning messages.
755 * fr30-desc.c: Fix compile time warning messages.
756 * fr30-dis.c: Fix compile time warning messages.
757 * fr30-ibld.c: Fix compile time warning messages.
759 2001-09-18 Bruno Haible <haible@clisp.cons.org>
761 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
762 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
763 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
764 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
766 (cgen_keyword_add): Use ISALNUM instead of isalnum.
767 (hash_keyword_name): Use TOLOWER instead of tolower.
768 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
769 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
771 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
772 * fr30-desc.c: Don't include <ctype.h>.
773 * fr30-ibld.c: Likewise.
774 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
775 (load_insn_classes, parse_resource_users, load_depfile): Use
776 ISSPACE instead of isspace.
777 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
778 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
780 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
781 * m32r-desc.c: Don't include <ctype.h>.
782 * m32r-ibld.c: Likewise.
783 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
784 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
786 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
788 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
790 * Makefile.am: Add rules and dependencies to create the s/390 opcode
791 table out of s390-opc.txt automatically.
792 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
793 * s390-mkopc.c (dumpTable): Change output to create a complete file.
794 * s390-opc.c: New improved opcode format macros and remove the
795 pregenerated opcode table.
796 * s390-opc.txt: Adapt to new improved opcode format macros.
798 2001-09-14 David Schleef <ds@schleef.org>
800 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
802 2001-09-04 Alan Modra <amodra@bigpond.net.au>
804 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
805 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
807 2001-08-31 Eric Christopher <echristo@redhat.com>
808 Jason Eckhardt <jle@redhat.com>
810 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
811 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
814 2001-08-31 Andreas Jaeger <aj@suse.de>
816 * tic54x-opc.c: Add default initializers to avoid warnings.
818 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
819 * arc-ext.c: Likewise.
821 2001-08-28 matthew gren <mrg@redhat.com>
823 * ppc-opc.c (icbt): Order correctly.
825 2001-08-27 David Edelsohn <dje@watson.ibm.com>
826 Torbjorn Granlund <tege@swox.com>
828 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
830 (insert_ds): Complain if not a multiple of 4.
832 (XSYNC_MASK): Define.
833 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
834 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
836 2001-08-26 Andreas Jaeger <aj@suse.de>
838 * h8500-opc.h: Add default initializers to h8500_table to shut up
841 2001-08-25 Andreas Jaeger <aj@suse.de>
843 * tic54x-dis.c: Add unused attributes where needed.
845 * z8k-dis.c (output_instr): Add unused attribute.
847 * h8300-dis.c: Add missing prototypes.
848 (bfd_h8_disassemble): Make static.
850 * cris-dis.c: Add missing prototype.
851 * h8500-dis.c: Likewise.
852 * m68hc11-dis.c: Likewise.
853 * pj-dis.c: Likewise.
854 * tic54x-dis.c: Likewise.
855 * v850-dis.c: Likewise.
856 * vax-dis.c: Likewise.
857 * w65-dis.c: Likewise.
858 * z8k-dis.c: Likewise.
860 * d10v-dis.c: Add missing prototype.
861 (dis_long): Remove unused variable.
862 (dis_2_short): Likewise.
864 * sh-dis.c: Add missing prototypes.
865 * v850-opc.c: Likewise.
866 Add unused attributes where needed.
868 * ns32k-dis.c: Add missing prototypes.
869 (bit_extract_simple): Remove unused variable.
871 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
873 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
874 branch instructions for gcc 3.0.
875 * opcodes/s390-opc.txt: Likewise.
877 2001-08-21 Andreas Jaeger <aj@suse.de>
879 * i960-dis.c: Add parameters for prototypes
880 (ctrl): Add unused attributes.
884 * mips-dis.c: Add missing prototypes.
885 * a29k-dis.c: Likewise.
886 * arc-dis.c: Likewise.
887 * ia64-opc.c: Likewise.
889 * s390-dis.c: Add missing prototypes.
890 (init_disasm): Remove unused attribute since the parameter is
893 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
895 * mips-opc.c (M1): Define. Reformatted Code.
896 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
899 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
901 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
902 the corresponding non-likely insn is in MIPS I.
904 2001-08-13 Kazu Hirata <kazu@hxi.com>
906 * mcore-dis.c: Fix formatting.
907 * mips-dis.c: Likewise.
908 * pj-dis.c: Likewise.
909 * z8k-dis.c: Likewise.
911 2001-08-12 Richard Henderson <rth@redhat.com>
913 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
914 to *VALUEP. Regenerate all cgen files.
916 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
918 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
920 * mips-opc.c (G6): Undefine.
921 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
922 as the first "move" alternative.
924 2001-08-10 Andreas Jaeger <aj@suse.de>
926 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
928 * configure: Regenerate.
930 2001-08-10 Alan Modra <amodra@bigpond.net.au>
932 * ppc-opc.c: Revert 2001-08-08.
934 2001-08-09 Alan Modra <amodra@bigpond.net.au>
936 * dis-buf.c (generic_strcat_address): Add missing prototype.
937 #if 0 the functions as it is unused.
939 2001-08-08 Alan Modra <amodra@bigpond.net.au>
941 1999-10-25 Torbjorn Granlund <tege@swox.com>
942 * ppc-opc.c: Include "bfd.h".
943 (powerpc_operands): Add new field for reloc type.
945 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
947 * mips-dis.c (print_insn_arg): Don't use software integer registers
948 for coprocessor registers.
949 (get_mips_isa): Removed.
950 (is_newabi): New function, checks if NewABI is used.
951 (_print_insn_mips): Get distinction between old ABI and new ABI right.
953 2001-08-01 Christian Groessler <cpg@aladdin.de>
955 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
956 get stderr definition.
957 (internal, gas): Removed warnings.
958 (gas): Create a correct final entry for created array.
959 * z8k-opc.h: Recreated with new z8kgen.
961 2001-07-28 Kazu Hirata <kazu@hxi.com>
963 * i386-dis.c: Fix formatting.
965 2001-07-28 Matthias Kramm <kramm@quiss.org>
967 * i386-dis.c: Change formatting conventions for architecture
968 i386:intel to better match the format of various intel i386
969 assemblers, like nasm, tasm or masm.
971 2001-07-24 Alan Modra <amodra@bigpond.net.au>
973 * Makefile.am: Update dependencies with "make dep-am".
974 * Makefile.in: Regenerate
976 2001-07-24 Kazu Hirata <kazu@hxi.com>
978 * alpha-dis.c: Fix formatting.
979 * cris-dis.c: Likewise.
980 * d10v-dis.c: Likewise.
981 * d30v-dis.c: Likewise.
982 * m10300-dis.c: Likewise.
983 * tic54x-dis.c: Likewise.
985 2001-07-23 Kazu Hirata <kazu@hxi.com>
987 * m68k-dis.c: Fix formatting.
988 * pj-dis.c: Likewise.
989 * s390-dis.c: Likewise.
990 * z8k-dis.c: Likewise.
992 2001-07-21 Chris Demetriou <cgd@broadcom.com>
994 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
995 into the rest of the surrounding definitions.
997 2001-07-18 Alan Modra <amodra@bigpond.net.au>
999 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1000 for lgdt, lidt, sgdt, sidt.
1002 2001-07-13 Philip Blundell <philb@gnu.org>
1004 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1006 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1008 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1010 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1011 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1012 to verify if it is worth parsing the insn as insn "x". Also update
1013 error message when insn is not a recognized format of the insn vs
1014 when the insn is completely unrecognized.
1016 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1018 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1020 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1021 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1023 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1025 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1026 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1027 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1029 2001-07-05 Ben Elliston <bje@redhat.com>
1031 * Makefile.am (CPUDIR): Define.
1032 (stamp-m32r): Update dependencies.
1033 (stamp-fr30): Ditto.
1034 (stamp-openrisc): Ditto.
1035 * Makefile.in: Regenerate.
1037 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1039 * ppc-opc.c: Fix encoding of 'clf' instruction.
1041 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1043 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1045 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1047 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1048 * cgen-opc.c (cgen_keyword_add): Ignore special first
1049 character when building nonalpha_chars field.
1051 2001-06-24 Ben Elliston <bje@redhat.com>
1053 * m88k-dis.c: Format to conform to GNU coding standards.
1055 2001-06-23 Andreas Jaeger <aj@suse.de>
1057 * disassemble.c (disassembler_usage): Add unused attribute.
1059 2001-06-22 Eric Christopher <echristo@redhat.com>
1061 * mips-opc.c: Move prefx to start of the table.
1063 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1065 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1068 2001-06-22 Pauli <pauli@moreton.com.au>
1070 * m68k-opc.c: Add wdebug instruction.
1072 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1074 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1076 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1078 * cgen-asm.c (cgen_parse_keyword): When looking for the
1079 boundaries of a keyword, allow any special characters
1080 that are actually in one of the allowed keyword.
1081 * cgen-opc.c (cgen_keyword_add): Add any special characters
1082 to the nonalpha_chars field.
1084 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1086 * s390-opc.c: Add lgh instruction.
1087 * s390-opc.txt: Likewise.
1089 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1091 * i386-dis.c: Group function prototypes in one place.
1092 (FLOATCODE): Redefine as 1.
1093 (USE_GROUPS): Redefine as 2.
1094 (USE_PREFIX_USER_TABLE): Redefine as 3.
1095 (X86_64_SPECIAL): Define as 4.
1096 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1097 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1098 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1099 (dis386): New table combining above four tables.
1100 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1101 (dis386_twobyte): New table combining above two tables.
1102 (x86_64_table): New table to handle x86_64.
1104 (float_mem_att, float_mem_intel): Delet.
1105 (float_mem): New table combining above two tables.
1106 (print_insn_i386): Modify for above.
1107 (dofloat): Likewise.
1108 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1109 Return 0 on success, 1 if no valid alternative.
1110 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1111 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1112 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1113 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1115 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1116 (OP_I64): If not 64-bit mode, call OP_I.
1117 OP_OFF64): If not 64-bit mode, call OP_OFF.
1118 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1119 'ignore'/'ignored' to 'bytemode'.
1121 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1123 * configure.in: Sort 'ta' case statement.
1124 * configure: Regenerate.
1126 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1128 (disx86_64_att): Likewise.
1129 (dis386_twobyte_att): Likewise.
1130 (print_insn_i386): Don't print branch hints as a prefix.
1131 (putop): 'H' macro prints branch hints.
1132 (get64): Kill compile warnings.
1134 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1136 * sh-opc.h (sh_table): Don't use empty initializers.
1138 2001-06-06 Christian Groessler <cpg@aladdin.de>
1140 * z8k-dis.c: Fix formatting.
1141 (unpack_instr): Remove unused cases in switch statement. Add
1142 safety abort() in default case.
1143 (unparse_instr): Add safety abort() in default case.
1145 2001-06-06 Peter Jakubek <pjak@snafu.de>
1147 * m68k-dis.c (print_insn_m68k): Fix typo.
1148 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1149 mcf (ColdFire) div, rem and moveb instructions.
1151 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1153 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1154 (cond_jump_mode, loop_jcxz_mode): Define.
1155 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1156 appropriate, and 'F' suffix to loop insns.
1157 (disx86_64_att): Likewise.
1158 (dis386_twobyte_att): Likewise.
1159 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1160 Output data size prefix for long conditional jumps. Output cs and
1162 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1163 (OP_J): Don't make PREFIX_DATA used.
1165 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1167 * sh-opc.h (sh_table): Complete last element entry to avoid
1170 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1172 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1174 2001-05-23 Alan Modra <amodra@one.net.au>
1176 * arc-opc.c: Whitespace changes.
1178 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1180 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1183 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1185 * cgen-dis.in (extract_normal): Complete support for min<base case.
1187 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1189 * mips-dis.c (INSNLEN): Rename MAXLEN.
1190 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1191 (print_insn_arg): Remove $ prefix of register names.
1192 (set_mips_isa_type): Remove.
1193 (mips_isa_type): New function.
1194 (get_mips_isa): New Function.
1195 (print_insn_mips): Rename _print_insn_mips.
1196 (_print_insn_mips): New function, contains code which was
1197 duplicated in print_insn_big_mips and print_insn_little_mips.
1198 (print_insn_big_mips): Moved code to _print_insn_mips.
1199 (print_insn_little_mips): Likewise.
1200 (print_mips16_insn_arg): Remove $ prefix of register names.
1201 Print error message before abort.
1203 2001-05-14 J.T. Conklin <jtc@redback.com>
1205 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1206 simplified mnemonics used for setting PPC750-specific special
1209 2001-05-12 H.J. Lu <hjl@gnu.org>
1211 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1214 2001-05-12 Peter Targett <peter.targett@arccores.com>
1216 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1217 register to r/w. Formatting fixes throughout file.
1219 2001-05-12 Alan Modra <amodra@one.net.au>
1221 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1223 (twobyte_has_modrm): Update table.
1224 (need_modrm): Give it file scope.
1225 (MODRM_CHECK): Define.
1226 (dofloat): Use MODRM_CHECK.
1231 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1233 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1234 even at end of a section.
1235 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1236 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1238 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1240 * disassemble.c (disassembler_usage): Remove unused attribute.
1242 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1244 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1246 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1248 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1249 assume incoming buffer already has the base insn loaded. Handle
1250 smaller-than-base instructions for variable-length case.
1252 2001-05-04 Alan Modra <amodra@one.net.au>
1254 * i386-dis.c (Ev, Ed): Remove duplicate define.
1257 (OP_XS): New function.
1258 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1260 (dis386_twobyte_intel): Likewise.
1261 (prefix_user_table): Use MS for maskmovq operand.
1263 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1265 * Makefile.am: Add OpenRISC target.
1266 * Makefile.in: Regenerated.
1268 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1270 * configure.in (bfd_openrisc_arch): Add target.
1271 * configure: Regenerated.
1273 * openrisc-asm.c: New file.
1274 * openrisc-desc.c: Likewise.
1275 * openrisc-desc.h: Likewise.
1276 * openrisc-dis.c: Likewise.
1277 * openrisc-ibld.c: Likewise.
1278 * openrisc-opc.c: Likewise.
1279 * openrisc-opc.h: Likewise.
1281 2001-04-24 Christian Groessler <cpg@aladdin.de>
1283 * z8k-dis.c: add names of control registers (ctrl_names);
1284 (seg_length): provides instruction length fixup for segmented
1285 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1286 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1287 (unparse_intr): handle CLASS_PR, print addresses without '#'
1288 * z8k-opc.h: re-created with new z8kgen
1289 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1290 entries for ldctl/ldctlb instruction
1292 2001-04-06 Andreas Jaeger <aj@suse.de>
1294 * i386-dis.c: Add ffreep instruction.
1296 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1298 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1300 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1302 * i386-dis.c (PREGRP25): Define.
1303 (dis386_twobyte_att): Use here in place of "movntq" entry.
1304 (dis386_twobyte_intel): Likewise.
1305 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1307 (dis386_twobyte_att): Use here.
1308 (dis386_twobyte_intel): Likewise.
1309 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1310 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1311 (prefix_user_table): Cosmetic changes to "bad" entries.
1313 2001-03-23 Nick Clifton <nickc@redhat.com>
1315 * mips-opc.c: Remove extraneous whitespace.
1316 * mips-dis.c: Remove extraneous whitespace.
1318 2001-03-22 Ben Elliston <bje@redhat.com>
1320 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1321 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1322 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1323 to allay a compiler warning.
1325 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1327 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1328 (dis386_twobyte_intel): Likewise.
1329 (twobyte_has_modrm): Set entry for paddq, psubq.
1331 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1333 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1334 determination via CGEN_COMPUTE_MACH.
1335 * fr30-desc.c: Regenerate.
1336 * fr30-dis.c: Regenerate.
1337 * fr30-opc.h: Regenerate.
1338 * m32r-desc.c: Regenerate.
1339 * m32r-dis.c: Regenerate.
1340 * m32r-opc.h: Regenerate.
1341 * m32r-opinst.c: Regenerate.
1343 2001-03-20 H.J. Lu <hjl@gnu.org>
1345 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1346 * configure: Rebuild.
1348 2001-03-19 Jim Wilson <wilson@redhat.com>
1350 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1351 notestr if larger than xsect.
1352 (in_class): Handle format M5.
1353 * ia64-asmtab.c: Regnerate.
1355 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1357 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1358 has more than one byte left to read.
1360 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1362 * s390-opc.c: Add new opcodes. Smooth out formatting.
1363 * s390-opc.txt: Add new opcodes.
1365 2001-03-06 Nick Clifton <nickc@redhat.com>
1367 * arm-dis.c (print_insn_thumb): Compute destination address
1368 of BLX(1) instruction by taking bit 1 from PC and not from bit
1371 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1373 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1374 so command line switches will work.
1376 2001-03-05 Dave Brolley <brolley@redhat.com>
1378 * fr30-asm.c: Regenerate.
1379 * fr30-desc.c: Regenerate.
1380 * fr30-desc.h: Regenerate.
1381 * fr30-dis.c: Regenerate.
1382 * fr30-ibld.c: Regenerate.
1383 * fr30-opc.c: Regenerate.
1384 * fr30-opc.h: Regenerate.
1385 * m32r-asm.c: Regenerate.
1386 * m32r-desc.c: Regenerate.
1387 * m32r-desc.h: Regenerate.
1388 * m32r-dis.c: Regenerate.
1389 * m32r-ibld.c: Regenerate.
1390 * m32r-opc.c: Regenerate.
1391 * m32r-opc.h: Regenerate.
1392 * m32r-opinst.c: Regenerate.
1394 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1396 * m68k-opc.c: fix cpushl according to Motorola. Enable
1397 bunch of instructions for Coldfire 5407 and add all new.
1399 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1401 * configure.in (BFD_VERSION): Do without grep.
1402 * configure: Regenerate.
1403 * Makefile.am: Run "make dep-am".
1404 * Makefile.in: Regenerate.
1406 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1408 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1409 * ia64-asmtab.c: Regenerate.
1411 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1413 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1414 separate variants: one for IMM22 and the other for IMM14.
1415 * ia64-asmtab.c: Regenerate.
1417 2001-02-21 Greg McGary <greg@mcgary.org>
1419 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1421 2001-02-20 H.J. Lu <hjl@gnu.org>
1423 * Makefile.am (ia64-ic.tbl): Remove the target.
1424 (ia64-raw.tbl): Likewise.
1425 (ia64-waw.tbl): Likewise.
1426 (ia64-war.tbl): Likewise.
1427 (ia64-asmtab.c): Generate it in the source directory.
1428 * Makefile.in: Regenerated.
1430 2001-02-18 lars brinkhoff <lars@nocrew.org>
1432 * Makefile.am: Add PDP-11 target.
1433 * configure.in: Likewise.
1434 * disassemble.c: Likewise.
1435 * pdp11-dis.c: New file.
1436 * pdp11-opc.c: New file.
1438 2001-02-14 Jim Wilson <wilson@redhat.com>
1440 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1441 * ia64-asmtab.c: Regenerate.
1443 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1445 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1449 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1451 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1452 the following instruction not of the jump itself for the jump
1454 (print_mips16_insn_arg): Likewise.
1456 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1458 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1460 * Makefile.in: Regenerate.
1462 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1464 * Makefile.am: Add linux target for S/390.
1465 * Makefile.in: Likewise.
1466 * configure.in: Likewise.
1467 * disassemble.c: Likewise.
1468 * s390-dis.c: New file.
1469 * s390-mkopc.c: New file.
1470 * s390-opc.c: New file.
1471 * s390-opc.txt: New file.
1473 2001-02-05 Jim Wilson <wilson@redhat.com>
1475 * ia64-asmtab.c: Revert 2000-12-16 change.
1477 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1479 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1480 * m32r-desc.h: Regenerate.
1482 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1484 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1485 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1487 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1489 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1491 2001-01-13 Nick Clifton <nickc@redhat.com>
1493 * disassemble.c: Remove spurious white space.
1495 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1497 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1500 2001-01-11 Peter Targett <peter.targett@arccores.com>
1502 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1503 * Makefile.am (C_FILES): Add arc-ext.c.
1504 (ALL_MACHINES) Add arc-ext.lo.
1505 (INCLUDES) Add opcode directory to list.
1506 New dependency entry for arc-ext.lo.
1507 * disassemble.c (disassembler): Correct call to
1508 arc_get_disassembler.
1509 * arc-opc.c: New update for ARC, including full base
1510 instructions for ARC variants.
1511 * arc-dis.h, arc-dis.c: New update for ARC, including
1512 extensibility functionality.
1513 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1515 2001-01-10 Jan Hubicka <jh@suse.cz>
1517 * i386-dis.c (PREGRP15 - PREGRP24): New.
1518 (dis386_twobyt): Add SSE2 instructions.
1519 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1520 (twobyte_uses_f3_prefix): ... this one.
1521 (grps): Add SSE instructions.
1522 (prefix_user_table): Add two new slots; add SSE2 instructions.
1523 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1524 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1525 to prefix_user_table.
1526 (OP_E): Accept mfence and lfence as well.
1527 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1528 (OP_XMM): Support REX extensions.
1532 2001-01-09 Nick Clifton <nickc@redhat.com>
1534 * arm-dis.c (print_insn): Set pc to zero for instructions with
1535 a reloc associated with them.
1537 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1539 * cgen-asm.in (parse_insn_normal): Changed syn to be
1540 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1541 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1542 to '\0' to use 0 instead.
1543 * cgen-dis.in (print_insn_normal): Ditto.
1544 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1546 2001-01-05 Jan Hubicka <jh@suse.cz>
1548 * i386-dis.c: Add x86_64 support.
1549 (rex): New static variable.
1550 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1551 (USED_REX): New macro.
1552 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1553 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1554 (OP_REG, OP_OFF): Declare.
1555 (get64, get32, get32s): New functions.
1556 (r??_reg): New constants.
1557 (dis386_att): Change templates of instruction implicitly promoted
1558 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1560 (dis386_intel): Likewise.
1561 (dixx86_64_att): New table based on dis386_att.
1562 (dixx86_64_intel): New table based on dis386_intel.
1563 (names64, names8rex): New global variable.
1564 (names32, names16): Add extended registers.
1565 (prefix_user_t): Recognize rex prefixes.
1566 (prefix_name): Print REX prefixes nicely.
1567 (op_riprel): New global variable.
1568 (start_pc): Set type to bfd_vma.
1569 (print_insn_i386): Detect the 64bit mode and use proper table;
1570 move ckprefix after initializing the buffer; output unused rex prefixes;
1571 output information about target of RIP relative addresses.
1572 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1573 (print_operand_value): New function.
1574 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1575 REX prefix and new modes.
1576 (get64, get32s): New.
1577 (get32): Return bfd_signed_vma type.
1578 (set_op): Initialize the op_riprel.
1579 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1581 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1583 cgen-dis.in (read_insn): Use bfd_get_bits()
1585 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1587 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1588 (hash_insn_list): Likewise
1589 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1590 (extract_1): Use bfd_get_bits().
1591 (extract_normal): Apply sign extension to both extraction
1593 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1594 (cgen_put_insn_value): Use bfd_put_bits()
1596 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1598 * cgen-asm.in (parse_insn_normal): Print better error message for
1599 instructions with missing operands.
1601 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1603 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1605 2000-12-16 Nick Clifton <nickc@redhat.com>
1607 * Makefile.in: Regenerate.
1608 * aclocal.m4: Regenerate.
1609 * config.in: Regenerate.
1610 * configure.in: Add spacing.
1611 * configure: Regenerate.
1612 * ia64-asmtab.c: Regenerate.
1613 * po/opcodes.pot: Regenerate.
1615 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1617 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1618 error messages over later parse-time ones.
1620 2000-12-12 Jim Wilson <wilson@redhat.com>
1622 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1624 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1625 (print_dependency_table): Print NULL if semantics field not set.
1626 (insert_opcode_dependencies): Mark cmp parameter as unused.
1627 (print_main_table): Use fprintf_vma to print long long fields.
1628 (main): Mark argv paramter as unused. Convert to old style definition.
1629 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1630 * ia64-asmtab.c: Regnerate.
1632 2000-12-09 Nick Clifton <nickc@redhat.com>
1634 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1637 * fr30-dis.c: Regenerate.
1639 2000-12-08 Peter Targett <peter.targett@arccores.com>
1641 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1642 * Makefile.am (C_FILES): Add arc-ext.c.
1643 (ALL_MACHINES) Add arc-ext.lo.
1644 (INCLUDES) Add opcode directory to list.
1645 New dependency entry for arc-ext.lo.
1646 * disassemble.c (disassembler): Correct call to
1647 arc_get_disassembler.
1648 * arc-opc.c: New update for ARC, including full base
1649 instructions for ARC variants.
1650 * arc-dis.h, arc-dis.c: New update for ARC, including
1651 extensibility functionality.
1652 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1654 2000-12-03 Chris Demetriou cgd@sibyte.com
1656 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1657 MOD_HILO, and MOD_LO macros.
1659 * mips-opc.c (M1, M2): Delete.
1660 (mips_builtin_opcodes): Remove all uses of M1.
1662 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1663 instructions take "G" format second operands and use the
1665 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1667 Delete "sel" code operands from mfc1 and mtc1.
1668 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1671 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1672 Chris Demetriou cgd@sibyte.com
1674 * mips-opc.c (mips_builtin_opcodes): Finish additions
1675 for MIPS32 support, and clean up existing entries for
1676 aesthetics, consistency with the MIPS32 ISA, and
1677 with consistency the rest of the table.
1679 2000-12-01 Nick Clifton <nickc@redhat.com>
1681 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1684 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1686 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1687 specifiers. Update 'B' for new constant names, and remove
1689 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1690 near the top of the array, so they are disassembled properly.
1691 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1692 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1693 specifier. Add 'H' format specifier variants for "mfc1,"
1694 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1695 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1696 "wait" variant which uses 'J' operand specifier.
1698 * mips-dis.c (set_mips_isa_type): Update to use
1699 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1700 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1701 * mips-opc.c (I32): New constant for instructions added in
1704 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1706 * mips-dis.c (set_mips_isa_type): Add cases for
1707 bfd_mach_mips5 and bfd_mach_mips64.
1708 * mips-opc.c (I64): New definitions.
1710 * mips-dis.c (set_mips_isa_type): Add case for
1713 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1715 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1716 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1717 Initialize variable dc to NULL.
1718 (print_insn_shx): Remove unused label d_reg_n.
1720 2000-11-24 Nick Clifton <nickc@redhat.com>
1722 * arm-opc.h: Add new opcode formatting parameter 'B'.
1723 (arm_opcodes): Add XScale, v5, and v5te instructions.
1724 (thumb_opcodes): Add v5t instructions.
1726 * arm-dis.c (print_insn_arm): Handle new 'B' format
1728 (print_insn_thumb): Decode BLX(1) instruction.
1730 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1732 * mips-opc.c: Fix file header comment.
1734 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1736 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1737 print_insn_cris_with_register_prefix.
1739 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1741 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1743 2000-11-07 Matthew Green <mrg@redhat.com>
1745 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1746 must be loaded there in their entirety.
1748 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1750 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1751 (compute_arch_mask): Add v8plusb and v9b machines.
1752 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1753 * sparc-opc.c: Support for Cheetah instruction set.
1754 (prefetch_table): Add #invalidate.
1756 2000-10-16 Nick Clifton <nickc@redhat.com>
1758 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1760 2000-10-06 Dave Brolley <brolley@redhat.com>
1762 * fr30-desc.h: Regenerate.
1763 * m32r-desc.h: Regenerate.
1764 * m32r-ibld.c: Regenerate.
1766 2000-10-05 Jim Wilson <wilson@redhat.com>
1768 * ia64-ic.tbl: Update from Intel.
1769 * ia64-asmtab.c: Regenerate.
1771 2000-10-04 Kazu Hirata <kazu@hxi.com>
1773 * ia64-gen.c: Convert C++-style comments to C-style comments.
1774 * tic54x-dis.c: Likewise.
1776 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1778 Changes to add dollar prefix to registers for files where user symbols
1779 don't have a leading underscore. Fix formatting.
1780 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1781 (format_reg): Add parameter with_reg_prefix. All callers changed.
1782 (print_with_operands): Ditto.
1783 (print_insn_cris_generic): Renamed from print_insn_cris, add
1784 parameter with_reg_prefix.
1785 (print_insn_cris_with_register_prefix,
1786 print_insn_cris_without_register_prefix, cris_get_disassembler):
1788 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1790 2000-09-22 Jim Wilson <wilson@redhat.com>
1792 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1793 gt, ge, ngt, and nge.
1794 * ia64-asmtab.c: Regenerate.
1796 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1797 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1798 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1799 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1800 * ia64-asmtab.c: Regnerate.
1802 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1804 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1805 Add mfc0 and mtc0 with sub-selection values.
1806 Add clo and clz opcodes.
1807 Add msub and msubu instructions for MIPS32.
1808 Add madd/maddu aliases for mad/madu for MIPS32.
1809 Support wait, deret, eret, movn, pref for MIPS32.
1810 Support tlbp, tlbr, tlbwi, tlbwr.
1813 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1814 (print_insn_arg): Handle 'H' args.
1815 (set_mips_isa_type): Recognize 4K.
1816 Use CPU_* defines instead of hardcoded numbers.
1818 2000-09-11 Catherine Moore <clm@redhat.com>
1820 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1821 (d30v_format_tab): Use Rb2 for modinc and moddec.
1823 2000-09-07 Catherine Moore <clm@redhat.com>
1825 * d30v-opc.c (d30v_format_tab): Use format Ra for
1828 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1830 * configure: Rebuilt with new libtool.m4.
1832 2000-09-05 Nick Clifton <nickc@redhat.com>
1834 * configure: Regenerate.
1835 * po/opcodes.pot: Regenerate.
1837 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1839 * acinclude.m4: Include libtool and gettext macros from the
1841 * aclocal.m4, configure: Rebuilt.
1843 2000-08-30 Kazu Hirata <kazu@hxi.com>
1845 * tic80-dis.c: Fix formatting.
1847 2000-08-29 Kazu Hirata <kazu@hxi.com>
1849 * w65-dis.c: Fix formatting.
1851 2000-08-28 Mark Hatle <mhatle@mvista.com>
1853 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1854 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1855 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1856 instructions. Added extended mnemonic mftbl as defined in the
1857 405GP manual for all PPCs.
1859 2000-08-28 Jim Wilson <wilson@redhat.com>
1861 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1862 call. Change last goto to use failed instead of done.
1864 2000-08-28 Dave Brolley <brolley@redhat.com>
1866 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1867 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1868 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1869 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1870 * cgen-dis.in (read_insn): New static function.
1871 (print_insn): Use read_insn to read the insn into the buffer and set
1873 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1875 * fr30-asm.c: Regenerated.
1876 * fr30-desc.c: Regenerated.
1877 * fr30-desc.h: Regenerated.
1878 * fr30-dis.c: Regenerated.
1879 * fr30-ibld.c: Regenerated.
1880 * fr30-opc.c: Regenerated.
1881 * fr30-opc.h: Regenerated.
1882 * m32r-asm.c: Regenerated.
1883 * m32r-desc.c: Regenerated.
1884 * m32r-desc.h: Regenerated.
1885 * m32r-dis.c: Regenerated.
1886 * m32r-ibld.c: Regenerated.
1887 * m32r-opc.c: Regenerated.
1889 2000-08-28 Kazu Hirata <kazu@hxi.com>
1891 * tic30-dis.c: Fix formatting.
1893 2000-08-27 Kazu Hirata <kazu@hxi.com>
1895 * sh-dis.c: Fix formatting.
1897 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1899 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1901 2000-08-24 Kazu Hirata <kazu@hxi.com>
1903 * z8k-dis.c: Fix formatting.
1905 2000-08-16 Jim Wilson <wilson@redhat.com>
1907 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1908 break, mov-immediate, nop.
1909 * ia64-opc-f.c: Delete fpsub instructions.
1910 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1911 address operand. Rewrite using macros to avoid long lines.
1912 * ia64-opc.h (POSTINC): Define.
1913 * ia64-asmtab.c: Regenerate.
1915 2000-08-15 Jim Wilson <wilson@redhat.com>
1917 * ia64-ic.tbl: Add missing entries.
1919 2000-08-08 Jason Eckhardt <jle@redhat.com>
1921 * i860-dis.c (print_br_address): Change third argument from int
1924 2000-08-07 Richard Henderson <rth@redhat.com>
1926 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1927 for MLI templates. Handle IA64_OPND_TGT64.
1929 2000-08-04 Ben Elliston <bje@redhat.com>
1931 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1932 * cgen.sh: Likewise.
1934 2000-08-02 Jim Wilson <wilson@redhat.com>
1936 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1938 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1940 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1941 Change return type from void to int. Check the combination
1942 of operands, return 1 if valid. Fix to avoid BUF overflow.
1943 Report undefined combinations of operands in COMMENT.
1944 Report internal errors to stderr. Output the adiw/sbiw
1945 constant operand in both decimal and hex.
1946 (print_insn_avr): Disassemble ldd/std with displacement of 0
1947 as ld/st. Check avr_operand () return value, handle invalid
1948 combinations of operands like unknown opcodes.
1950 2000-07-28 Ben Elliston <bje@redhat.com>
1952 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1953 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1954 * Makefile.in: Regenerate.
1955 * configure.in: Add --enable-cgen-maint option.
1956 * configure: Regenerate.
1958 2000-07-26 Dave Brolley <brolley@redhat.com>
1960 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1961 (cgen_hw_lookup_by_num): Ditto.
1962 (cgen_operand_lookup_by_name): Ditto.
1963 (print_address): Ditto.
1964 (print_keyword): Ditto.
1965 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1967 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1969 (cgen_parse_keyword): Ditto.
1971 2000-07-22 Jason Eckhardt <jle@redhat.com>
1973 * i860-dis.c: New file.
1974 (print_insn_i860): New function.
1975 (print_br_address): New function.
1976 (sign_extend): New function.
1977 (BITWISE_OP): New macro.
1978 (I860_REG_PREFIX): New macro.
1979 (grnames, frnames, crnames): New structures.
1981 * disassemble.c (ARCH_i860): Define.
1982 (disassembler): Add check for bfd_arch_i860 to set disassemble
1983 function to print_insn_i860.
1985 * Makefile.in (CFILES): Added i860-dis.c.
1986 (ALL_MACHINES): Added i860-dis.lo.
1987 (i860-dis.lo): New dependences.
1989 * configure.in: New bits for bfd_i860_arch.
1991 * configure: Regenerated.
1993 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1995 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1996 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1997 (cris-dis.lo, cris-opc.lo): New rules.
1998 * Makefile.in: Rebuild.
1999 * configure.in (bfd_cris_arch): New target.
2000 * configure: Rebuild.
2001 * disassemble.c (ARCH_cris): Define.
2002 (disassembler): Support ARCH_cris.
2003 * cris-dis.c, cris-opc.c: New files.
2004 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2006 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2008 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2009 Reported by Bill Clarke <llib@computer.org>.
2011 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2013 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2014 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2016 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2018 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2019 fput_const, extract_3, extract_5_load, extract_5_store,
2020 extract_5r_store, extract_5R_store, extract_10U_store,
2021 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2022 extract_12, extract_17, extract_22): Prototype.
2023 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2024 shadowing outer block.
2027 2000-07-05 DJ Delorie <dj@redhat.com>
2031 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2033 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2035 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2037 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2038 marked for translation (exception from the usual coding style).
2039 (print_insn_avr): Initialize insn2 to avoid warnings.
2041 2000-07-03 Kazu Hirata <kazu@hxi.com>
2043 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2044 * h8500-dis.c: Fix formatting.
2046 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2048 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2049 (CLEANFILES): Add DEPA.
2050 * Makefile.in: Regenerate.
2052 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2054 * arm-dis.c (regnames): Add an additional register set to match
2055 the set used by GCC. Make it the default.
2057 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2059 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2061 * Makefile.in: Regenerate.
2063 2000-06-20 H.J. Lu <hjl@gnu.org>
2065 * Makefile.am: Rebuild dependency.
2066 * Makefile.in: Rebuild.
2068 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2070 * Makefile.in, configure: regenerate
2071 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2073 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2075 * configure.in: Recognize m68hc12 and m68hc11.
2076 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2077 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2078 and opcode generation for m68hc11 and m68hc12.
2080 2000-06-16 Nick Duffek <nsd@redhat.com>
2082 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2083 bfd_mach_ppc_620 instead of 620.
2085 2000-06-12 Kazu Hirata <kazu@hxi.com>
2087 * h8300-dis.c: Fix formatting.
2088 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2091 2000-06-09 Denis Chertykov <denisc@overta.ru>
2093 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2095 2000-06-07 Denis Chertykov <denisc@overta.ru>
2097 * avr-dis.c: completely rewritten.
2099 2000-06-02 Kazu Hirata <kazu@hxi.com>
2101 * h8300-dis.c: Follow the GNU coding style.
2102 (bfd_h8_disassemble) Fix a typo.
2104 2000-06-01 Kazu Hirata <kazu@hxi.com>
2106 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2107 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2108 correctly. Fix a typo.
2110 2000-05-31 Nick Clifton <nickc@redhat.com>
2112 * opintl.h (_(String)): Explain why dgettext is used instead of
2115 2000-05-30 Nick Clifton <nickc@redhat.com>
2117 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2118 bindtextdomain): Replace defines with those from intl/libgettext.h
2119 to quieten gcc warnings.
2121 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2123 * Makefile.am: Update dependencies with "make dep-am"
2124 * Makefile.in: Regenerate.
2126 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2128 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2129 sign-extending operands.
2131 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2133 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2136 2000-05-21 Nick Clifton <nickc@redhat.com>
2138 * Makefile.am (LIBIBERTY): Define.
2140 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2142 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2143 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2144 (reg_names): Rename to std_reg_names. Change it to a char **
2146 (std_reg_names): New name for reg_names.
2147 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2150 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2152 * fr30-desc.h: Partially regenerated to account for changed
2153 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2154 * m32r-desc.h: Ditto.
2156 2000-05-15 Nick Clifton <nickc@redhat.com>
2158 * arm-opc.h: Use upper case for flasg in MSR and MRS
2159 instructions. Allow any bit to be set in the field_mask of
2160 the MSR instruction.
2162 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2163 field_mask of an MSR instruction.
2165 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2167 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2168 instructions changed to ldrsb/ldrsh.
2170 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2172 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2173 target addresses for 'jal' and 'j'.
2175 2000-05-10 Geoff Keating <geoffk@redhat.com>
2177 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2178 also available in common mode when powerpc syntax is being used.
2180 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2182 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2183 (dummy_print_address): Ditto.
2185 2000-05-04 Timothy Wall <twall@redhat.com>
2187 * tic54x-opc.c: New.
2188 * tic54x-dis.c: New.
2189 * disassemble.c (disassembler): Add ARCH_tic54x.
2190 * configure.in: Added tic54x target.
2192 * Makefile.am: Add tic54x dependencies.
2193 * Makefile.in: Ditto.
2195 2000-05-03 J.T. Conklin <jtc@redback.com>
2197 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2198 vector unit operands.
2199 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2200 unit instruction formats.
2201 (PPCVEC): New macro, mask for vector instructions.
2202 (powerpc_operands): Add table entries for above operand types.
2203 (powerpc_opcodes): Add table entries for vector instructions.
2205 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2206 (print_insn_little_powerpc): Likewise.
2207 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2209 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2211 * configure.in: Add bfd_powerpc_64_arch.
2212 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2215 2000-04-24 Nick Clifton <nickc@redhat.com>
2217 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2220 2000-04-23 Denis Chertykov <denisc@overta.ru>
2222 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2224 (reg_fmul_r): New. Extract source register from FMUL instruction.
2225 (reg_muls_d): New. Extract destination register from MULS instruction.
2226 (reg_muls_r): New. Extract source register from MULS instruction.
2227 (reg_movw_d): New. Extract destination register from MOVW instruction.
2228 (reg_movw_r): New. Extract source register from MOVW instruction.
2229 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2230 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2232 2000-04-22 Timothy Wall <twall@redhat.com>
2234 * ia64-gen.c (general): Add an ordered table of primary
2235 opcode names, as well as priority fields to disassembly data
2236 structures to enforce a preferred disassembly format based on the
2237 ordering of the opcode tables.
2238 (load_insn_classes): Show a useful message if IC tables are missing.
2239 (load_depfile): Ditto.
2240 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2241 distinguish preferred disassembly.
2242 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2243 format. Fix incorrect flag on fma.s/fma.s.s0.
2244 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2245 the highest priority.
2246 * ia64-opc-b.c: Use more abbreviations.
2247 * ia64-asmtab.c: Regenerate.
2249 2000-04-21 Jason Eckhardt <jle@redhat.com>
2251 * hppa-dis.c (extract_16): New function.
2252 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2253 new operand types l,y,&,fe,fE,fx.
2255 2000-04-21 Richard Henderson <rth@redhat.com>
2256 David Mosberger <davidm@hpl.hp.com>
2257 Timothy Wall <twall@redhat.com>
2258 Bob Manson <manson@charmed.cygnus.com>
2259 Jim Wilson <wilson@redhat.com>
2261 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2262 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2263 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2265 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2266 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2267 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2268 * Makefile.in: Rebuild.
2269 * configure Rebuild.
2270 * configure.in (bfd_ia64_arch): New target.
2271 * disassemble.c (ARCH_ia64): Define.
2272 (disassembler): Support ARCH_ia64.
2273 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2274 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2275 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2276 ia64-war.tbl, ia64-waw.tbl: New files.
2278 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2280 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2281 (disassemble): Use them.
2283 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2285 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2286 * Makefile.am: Update dependencies.
2287 * Makefile.in: Regenerate.
2289 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2291 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2292 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2293 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2294 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2295 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2296 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2297 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2298 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2299 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2300 ansidecl.h as sysdep.h includes it.
2302 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2304 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2305 --enable-build-warnings option.
2306 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2307 * Makefile.in, configure: Re-generate.
2309 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2311 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2312 stc GBR,@-<REG_N> is available for arch_sh1_up.
2313 Group parallel processing insn with identical mnemonics together.
2314 Make three-operand psha / pshl come first.
2316 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2318 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2319 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2320 (sh_arg_type): Add A_PC.
2321 (sh_table): Update entries using immediates. Add repeat.
2322 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2323 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2325 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2327 * po/opcodes.pot: Regenerate.
2329 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2330 (DEP): Quote when passing vars to sub-make. Add warning message
2332 (DEP1): Rewrite for "gcc -MM".
2333 (CLEANFILES): Add DEP2.
2334 Update dependencies.
2335 * Makefile.in: Regenerate.
2337 2000-04-03 Denis Chertykov <denisc@overta.ru>
2339 * avr-dis.c: Syntax cleanup.
2340 (add0fff): Print the pc relative address as a signed number.
2341 (add03f8): Likewise.
2343 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2345 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2346 the parameter ATTRIBUTE_UNUSED.
2347 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2349 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2351 * m10300-opc.c: SP-based offsets are always unsigned.
2353 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2355 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2356 [branch always] instead of "undefined".
2358 2000-03-27 Nick Clifton <nickc@redhat.com>
2360 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2361 short instructions, from end of list of long instructions.
2363 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2365 * Makefile.am (CFILES): Add avr-dis.c.
2366 (ALL_MACHINES): Add avr-dis.lo.
2368 2000-03-27 Alan Modra <alan@linuxcare.com>
2370 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2372 (print_insn_avr): Call function via pointer in K&R compatible way.
2373 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2374 add0fff, add03f8): Convert to old style function declaration and
2376 (avrdis_opcode): Add prototype.
2378 2000-03-27 Denis Chertykov <denisc@overta.ru>
2380 * avr-dis.c: New file. AVR disassembler.
2381 * configure.in (bfd_avr_arch): New architecture support.
2382 * disassemble.c: Likewise.
2383 * configure: Regenerate.
2385 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2387 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2389 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2391 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2392 flag to determine if operand is pc-relative.
2394 (d30v_format_table):
2395 (REL6S3): Renamed from IMM6S3.
2396 Added flag OPERAND_PCREL.
2397 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2398 added flag OPERAND_PCREL.
2399 (IMM12S3U): Replaced with REL12S3.
2400 (SHORT_D2, LONG_D): Delay target is pc-relative.
2401 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2402 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2403 using the REL* operands.
2404 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2405 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2406 LONG_Db, using REL* operands.
2407 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2408 (d30v_opcode_table): Use new *r formats.
2410 2000-02-28 Nick Clifton <nickc@redhat.com>
2412 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2413 'signed_overflow_ok_p'.
2415 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2417 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2418 name of the libtool directory.
2419 * Makefile.in: Rebuild.
2421 2000-02-24 Nick Clifton <nickc@redhat.com>
2423 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2424 (cgen_clear_signed_overflow_ok): New function.
2425 (cgen_signed_overflow_ok_p): New function.
2427 2000-02-23 Andrew Haley <aph@redhat.com>
2429 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2430 m32r-ibld.c, m32r-opc.h: Rebuild.
2432 2000-02-23 Linas Vepstas <linas@linas.org>
2434 * i370-dis.c, i370-opc.c: New.
2436 * disassemble.c (ARCH_i370): Define.
2437 (disassembler): Handle it.
2439 * Makefile.am: Add support for Linux/IBM 370.
2440 * configure.in: Likewise.
2442 * Makefile.in: Regenerate.
2443 * configure: Likewise.
2445 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2447 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2448 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2451 2000-02-22 Andrew Haley <aph@redhat.com>
2453 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2455 * mips-opc.c (G6): New define.
2456 (mips_builtin_op): Add "move" definition for -gp32.
2458 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2460 From Grant Erickson <gerickso@Brocade.COM>:
2461 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2463 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2465 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2468 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2470 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2471 (print_insn_ppi): Likewise.
2472 (print_insn_shx): Use info->mach to select appropriate insn set.
2473 Add support for sh-dsp. Remove FD_REG_N support.
2474 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2475 (sh_arg_type): Likewise. Remove FD_REG_N.
2476 (sh_dsp_reg_nums): New enum.
2477 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2478 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2479 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2480 (arch_sh3_dsp_up): Likewise.
2481 (sh_opcode_info): New field: arch.
2482 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2483 D_REG_N. Fill in arch field. Add sh-dsp insns.
2485 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2487 * arm-dis.c: Change flavor name from atpcs-special to
2488 special-atpcs to prevent name conflict in gdb.
2489 (get_arm_regname_num_options, set_arm_regname_option,
2490 get_arm_regnames): New functions. API to access the several
2491 flavor of register names. Note: Used by gdb.
2492 (print_insn_thumb): Use the register name entry from the currently
2493 selected flavor for LR and PC.
2495 2000-02-10 Nick Clifton <nickc@redhat.com>
2497 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2499 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2500 "mulsh.h" instructions.
2501 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2503 (print_insn_mcore): Add support for little endian targets.
2504 Add support for MULSH and OPSR classes.
2506 2000-02-07 Nick Clifton <nickc@redhat.com>
2508 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2509 Previous delat did not take.
2511 2000-02-03 Timothy Wall <twall@redhat.com>
2513 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2514 to adjust target address bounds checking and calculate the
2515 appropriate octet offset into data.
2517 2000-01-27 Nick Clifton <nickc@redhat.com>
2519 * arm-dis.c: (parse_disassembler_option): Rename to
2520 parse_arm_disassembler_option and allow to be exported.
2522 * disassemble.c (disassembler_usage): New function: Print out any
2523 target specific disassembler options.
2524 Call arm_disassembler_options() if the ARM architecture is being
2527 * arm-dis.c (NUM_ELEM): Define this macro if not already
2529 (arm_regname): New struct type for ARM register names.
2530 (arm_toggle_regnames): Delete.
2531 (parse_disassembler_option): Use register name structure.
2532 (print_insn): New function: Combines duplicate code found in
2533 print_insn_big_arm and print_insn_little_arm.
2534 (print_insn_big_arm): Call print_insn.
2535 (print_insn_little_arm): Call print_insn.
2536 (print_arm_disassembler_options): Display list of supported,
2537 ARM specific disassembler options.
2539 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2541 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2542 ARM_STT_16BIT flag as Thumb code symbols.
2544 * arm-dis.c (printf_insn_little_arm): Ditto.
2546 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2548 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2549 of raw thumb instructions.
2551 2000-01-20 Nick Clifton <nickc@redhat.com>
2553 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2555 2000-01-03 Nick Clifton <nickc@cygnus.com>
2557 * arm-dis.c (streq): New macro.
2558 (strneq): New macro.
2559 (force_thumb): ew local variable.
2560 (parse_disassembler_option): New function: Parse a single, ARM
2561 specific disassembler command line switch.
2562 (parse_disassembler_option): Call parse_disassembler_option to
2563 parse individual command line switches.
2564 (print_insn_big_arm): Check force_thumb.
2565 (print_insn_little_arm): Check force_thumb.
2567 For older changes see ChangeLog-9899
2573 version-control: never