Sascha Wildner [Sun, 25 Nov 2007 14:48:30 +0000 (14:48 +0000)]
Remove (now) bogus prototype.
Sascha Wildner [Sun, 25 Nov 2007 14:33:02 +0000 (14:33 +0000)]
* Add prototype for callrpc()
* Fix function type for callrpc() in rpc(3)
* Raise WARNS to 2 for librpcsvc, fix warnings and ansify
Sepherosa Ziehau [Sun, 25 Nov 2007 10:31:41 +0000 (10:31 +0000)]
- Cache PCI-X capability PTR.
- Add IVARs to read PCI Express and PCI-X capability PTR.
- Add convenient functions to test whether a device is PCI Express based
or is PCI-X based.
Peter Avalos [Sun, 25 Nov 2007 04:42:38 +0000 (04:42 +0000)]
Don't use the devstat->busy_count for state decisions in the device
drivers. Doing so imposes atomicity and locking constraints.
Obtained-from: FreeBSD
Sepherosa Ziehau [Sun, 25 Nov 2007 04:08:42 +0000 (04:08 +0000)]
Cache following information for PCI Express capability:
- Capability PTR
- PCI Express Capabilities register
- Slot Capabilities register
Print them if 'bootverbose'.
Above information should be enough for identifying PCI Express hot-plug
support, e.g. ExpressCard
Peter Avalos [Sun, 25 Nov 2007 02:21:30 +0000 (02:21 +0000)]
Fix typo.
Obtained-from: FreeBSD
Sepherosa Ziehau [Sun, 25 Nov 2007 02:17:56 +0000 (02:17 +0000)]
Factor out a function to read power management capability
Peter Avalos [Sun, 25 Nov 2007 01:30:55 +0000 (01:30 +0000)]
panic() shouldn't have a \n.
Obtained-from: FreeBSD
Peter Avalos [Sun, 25 Nov 2007 01:29:57 +0000 (01:29 +0000)]
panic() shouldn't have a \n.
Obtained-from: FreeBSD
Sascha Wildner [Sun, 25 Nov 2007 01:28:24 +0000 (01:28 +0000)]
Add some #include's to fix 'implicit declaration of...' warnings.
Peter Avalos [Sun, 25 Nov 2007 01:21:42 +0000 (01:21 +0000)]
Use parens for arguments in macro.
Obtained-from: FreeBSD
Sascha Wildner [Sun, 25 Nov 2007 00:13:28 +0000 (00:13 +0000)]
Adjust acpi.c and bios.c to use kfreeenv()/ktestenv() and remove the
freeenv/testenv compatibility defines.
Peter Avalos [Sat, 24 Nov 2007 23:12:51 +0000 (23:12 +0000)]
Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.
Obtained-from: FreeBSD
Sascha Wildner [Sat, 24 Nov 2007 23:12:36 +0000 (23:12 +0000)]
Remove old prototypes of consinit() (which was removed along with pcvt(4))
and usrinfoinit() (which was removed from FreeBSD before we forked).
Peter Avalos [Sat, 24 Nov 2007 19:57:01 +0000 (19:57 +0000)]
A SCSI_DELAY of zero is a legitimate value to have in some cases.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 19:41:39 +0000 (19:41 +0000)]
Don't call dkpart() just to print the result, it is constant.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 19:22:51 +0000 (19:22 +0000)]
Document camcontrol load.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 19:19:43 +0000 (19:19 +0000)]
Make SCSI_DELAY setable at boot time and runtime via the
kern.cam.scsi_delay tunable/sysctl.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 18:55:27 +0000 (18:55 +0000)]
Add some \n's to kprintf()s.
Obtained-from: FreeBSD
Sascha Wildner [Sat, 24 Nov 2007 18:53:15 +0000 (18:53 +0000)]
s/Conatainer/Container/
Taken-from: FreeBSD
Sascha Wildner [Sat, 24 Nov 2007 18:47:07 +0000 (18:47 +0000)]
Use .An
Sepherosa Ziehau [Sat, 24 Nov 2007 13:21:32 +0000 (13:21 +0000)]
Rename pci_read_extcap() to pci_read_capabilities() to avoid possible
confusion between PCI "capability" and PCI Express "extended capability".
Sepherosa Ziehau [Sat, 24 Nov 2007 13:04:16 +0000 (13:04 +0000)]
White space
Sepherosa Ziehau [Sat, 24 Nov 2007 06:47:37 +0000 (06:47 +0000)]
- Factor out pci_fixup_nextptr().
- The checking about whether 'data' register of power management capability
exists or not is incorrect, according to PCI local bus spec:
1) Next capability is not necessarily at a higher location than the
current capability.
2) Two capabilities are not necessarily consecutive.
Set it to 0 for now (it is not used at all) and add comment about a possible
way to test the existence of this register in power management capability.
- Clean up pci_read_extcap() a little bit.
Peter Avalos [Sat, 24 Nov 2007 05:18:35 +0000 (05:18 +0000)]
If we boot verbose, then print out 'interesting' CAM errors that otherwise
would hide problems (like Selection Timeout).
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 03:48:31 +0000 (03:48 +0000)]
Add REPORT LUNS basic infrastructure.
Obtained-from: FreeBSD
Sepherosa Ziehau [Sat, 24 Nov 2007 03:42:24 +0000 (03:42 +0000)]
- Push PCI status "capability list bit" checking down into pci_read_extcap().
- Mask bottom two bits of "next pointer", add comment about it.
- If "next pointer" is not 0 and is less than 0x40 (standard PCI configuration
space size), then it is illegal, bark out loudly and terminate the capability
iteration.
Peter Avalos [Sat, 24 Nov 2007 03:13:03 +0000 (03:13 +0000)]
Do not +1 with MAXPATHLEN.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 03:09:57 +0000 (03:09 +0000)]
Remove unused variable.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 02:36:13 +0000 (02:36 +0000)]
Remove extra semicolon.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 02:29:24 +0000 (02:29 +0000)]
Remove comment that doesn't seem to apply any more.
Peter Avalos [Sat, 24 Nov 2007 02:08:50 +0000 (02:08 +0000)]
Staticise a debugging variable.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 01:53:50 +0000 (01:53 +0000)]
Const'ify the CDB format string passed to the CDB parsing routines
(csio_decode_visit() and family).
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 01:38:46 +0000 (01:38 +0000)]
Fix breakage in 'camcontrol defects' introduced in last commit.
Obtained-from: FreeBSD
Peter Avalos [Sat, 24 Nov 2007 01:31:39 +0000 (01:31 +0000)]
Be very generous with timeouts for synchronize cache. We may wait a very long
time in the cases where it really sends the drive out to lunch, but it also
allows us to catch very weird edge cases of strange drives that might take
a very long time.
Obtained-from: FreeBSD
Simon Schubert [Sat, 24 Nov 2007 00:55:10 +0000 (00:55 +0000)]
Add llabs(3).
Simon Schubert [Sat, 24 Nov 2007 00:54:25 +0000 (00:54 +0000)]
Add llabs(3).
Obtained-From: FreeBSD
Sascha Wildner [Fri, 23 Nov 2007 23:16:37 +0000 (23:16 +0000)]
Uniformly refer to RFCs as 'RFC xxxx' and not 'RFCxxxx' or 'RFC-xxxx'.
Sascha Wildner [Fri, 23 Nov 2007 23:03:57 +0000 (23:03 +0000)]
Fix a number of typos in defined values (ioctls and others).
Matthew Dillon [Fri, 23 Nov 2007 22:29:51 +0000 (22:29 +0000)]
Remove debugging printfs.
Sascha Wildner [Fri, 23 Nov 2007 20:08:35 +0000 (20:08 +0000)]
Properly use .Ar
Sepherosa Ziehau [Fri, 23 Nov 2007 14:41:56 +0000 (14:41 +0000)]
Add comment about pcicfgregs.pmgt field
Sepherosa Ziehau [Fri, 23 Nov 2007 14:36:17 +0000 (14:36 +0000)]
Create structure to group PCI power management configuration
Obtained-from: FreeBSD
Sepherosa Ziehau [Fri, 23 Nov 2007 13:40:58 +0000 (13:40 +0000)]
- Add CAP_PTR macro for type 2 devices (cardbus)
- Less magic values in pci_read_extcap()
Obtained-from: FreeBSD
Sascha Wildner [Thu, 22 Nov 2007 21:17:55 +0000 (21:17 +0000)]
Use .Ev
Hasso Tepper [Thu, 22 Nov 2007 20:19:43 +0000 (20:19 +0000)]
Fix typos.
Obtained-from: NetBSD
Sascha Wildner [Thu, 22 Nov 2007 20:13:38 +0000 (20:13 +0000)]
Remove comments about 0x2 flags value and FDC_YE option of which there
are no traces in the code.
Found-in: FreeBSD
Matthew Dillon [Thu, 22 Nov 2007 19:57:14 +0000 (19:57 +0000)]
Replace the very predictable 'random' IP sequence number generator with
something far less predictable. Use DragonFly's built-in PRNG and add a
shuffle algorithm. We eat 128KB of ram for the shuffle array but I've
pretty much had it with roll-your-own PRNGs. At least this way any PRNG
issues can be corrected in one place -- our system PRNG.
Turn net.inet.ip.random_id on by default. Eat the minor loss in performance.
On the bright side, our PRNG is very fast, so this should not represent
a burden.
References: Analysis of BSD ip randomizer algorithm by "Amit Klein"
<amit.klein@trusteer.com> showing serious vulnerabilities in
the algorithm.
Peter Avalos [Thu, 22 Nov 2007 17:35:12 +0000 (17:35 +0000)]
Fix bug in scsi_read_write() where it might use 6-byte commands when
10/12-byte-specific flags were specified.
Obtained-from: FreeBSD
Peter Avalos [Thu, 22 Nov 2007 17:11:43 +0000 (17:11 +0000)]
Fix typo in comment.
Obtained-from: FreeBSD
Peter Avalos [Thu, 22 Nov 2007 16:34:25 +0000 (16:34 +0000)]
Add interfaces for SCSI LOG SELECT and LOG SENSE commands.
Obtained-from: FreeBSD
Peter Avalos [Thu, 22 Nov 2007 15:53:16 +0000 (15:53 +0000)]
Mark some functions as __printflike().
Obtained-from: FreeBSD
Sascha Wildner [Thu, 22 Nov 2007 08:40:03 +0000 (08:40 +0000)]
Use .Ev
Peter Avalos [Thu, 22 Nov 2007 00:59:49 +0000 (00:59 +0000)]
Kill the command (don't rerun it) if we had an AUTOSENSE failure.
If we had an AUTOSENSE failure, we don't know what SENSE DATA
we had for a CHECK CONDITION. It's far better to assume failure
in this case.
Obtained-from: FreeBSD
Peter Avalos [Wed, 21 Nov 2007 22:10:16 +0000 (22:10 +0000)]
Propagate CAM_DIS_DISCONNECT on through:
1. If we get frozen, unfreeze for disable disconnects.
2. Put CAM_DIS_DISCONNECT commands at the head of the work queue
(we have a target still connected and we can't run anything else
until this command completes).
If we had an error sending the last CTIO, unfreeze the queue anyway.
Obtained-from: FreeBSD
Sascha Wildner [Wed, 21 Nov 2007 22:02:32 +0000 (22:02 +0000)]
Fix .Dv abuse and use .Li instead.
Peter Avalos [Wed, 21 Nov 2007 21:28:41 +0000 (21:28 +0000)]
Check the void * argument in the AC_FOUND_DEV case against NULL.
Obtained-from: FreeBSD
Peter Avalos [Wed, 21 Nov 2007 20:29:34 +0000 (20:29 +0000)]
Cleanup some of the XPORT_FC code (mostly whitespace)
Obtained-from: FreeBSD
Peter Avalos [Wed, 21 Nov 2007 20:07:31 +0000 (20:07 +0000)]
Add a transport settings variant for Fibre Channel.
Obtained-from: FreeBSD
Sascha Wildner [Wed, 21 Nov 2007 19:12:41 +0000 (19:12 +0000)]
Uniformly use .Pa for URLs.
Matthew Dillon [Wed, 21 Nov 2007 05:48:31 +0000 (05:48 +0000)]
Fix loc_seek - using lseek to acquire the directory cookie.
Reminded-by: "Simon 'corecode' Schubert" <corecode@fs.ei.tum.de>
Matthew Dillon [Tue, 20 Nov 2007 22:55:40 +0000 (22:55 +0000)]
HAMMER 5/many - in-memory cache and more vnops.
Get more vnops working with the in-memory cache. Files can now be created,
linked, and deleted. Directories can be scanned. NOTE: The topology is
not yet flushed to the media.
Matthew Dillon [Tue, 20 Nov 2007 22:52:23 +0000 (22:52 +0000)]
Break out the scan info structure's support routines so external code
can use them directly.
Sascha Wildner [Tue, 20 Nov 2007 22:50:48 +0000 (22:50 +0000)]
mdoc(7) section order
Matthew Dillon [Tue, 20 Nov 2007 21:37:54 +0000 (21:37 +0000)]
Add vop_helper_create_uid() - roughly taken from UFS. Figure out special
directory permissions given the directory mode, uid, cred, and other
information, and return the uid which should be used to create a new
file/node.
Matthew Dillon [Tue, 20 Nov 2007 21:36:08 +0000 (21:36 +0000)]
Clean up some missing 32->64 bit cookie conversions. Adjust the NFS server
to return 64 bit cookies (NFSv3 supports 64 bit cookies).
Matthew Dillon [Tue, 20 Nov 2007 21:03:51 +0000 (21:03 +0000)]
Make necessary changes to readdir/getdirentries to support HAMMER. HAMMER
needs to use 64 bit directory cookies.
Adjust libc's DIR structure and change readdir to acquire the directory
position via lseek() instead of using the basep argument to getdirentries().
The basep argument is a long, which is 32 bits on IA32, and it just isn't
wide enough. The seek position is 64 bits and is wide enough.
Sizeof(DIR) has changed, but hopefully won't cause any major issues since
libc is responsible for allocating it. The APIs remain the same.
Adjust the VOP_READIR() VFS interface routine to return 64 bit cookies.
All VFSs have been reworked, requiring only minor adjustments.
Matthew Dillon [Tue, 20 Nov 2007 18:35:46 +0000 (18:35 +0000)]
Adjust getdirentries() to allow basep to be NULL. Use off_t for the loff
calculation, but we can't change basep's documented type yet.
Matthew Dillon [Tue, 20 Nov 2007 18:34:01 +0000 (18:34 +0000)]
Add a helper function vop_helper_setattr_flags() modeled off of UFS's
chflags checks.
Matthew Dillon [Tue, 20 Nov 2007 18:21:35 +0000 (18:21 +0000)]
Update the documentation for getdirentries(2). Describe issues with using
long *basep (it not being wide enough) and suggest using lseek (with its 64
bit seek 'offset') instead.
Hasso Tepper [Tue, 20 Nov 2007 11:32:28 +0000 (11:32 +0000)]
Fix the fix.
Pointed-out-by: swildner@
Hasso Tepper [Tue, 20 Nov 2007 09:25:21 +0000 (09:25 +0000)]
Add SATA ATAPI support for AHCI controllers.
Obtained-from: FreeBSD
Reviewed-by: tgen@
Hasso Tepper [Tue, 20 Nov 2007 08:40:42 +0000 (08:40 +0000)]
Fix typo.
Matthew Dillon [Tue, 20 Nov 2007 07:16:28 +0000 (07:16 +0000)]
HAMMER 4/many - more core infrastructure
* Add reserved areas for a boot area and a memory log.
* Add merged scan operations which are the core procedures used to execute
most filesystem operations. These functions will access both the
in-memory tree of unsynchronized information and the on-disk topology
to generate a 'merged' result.
Amoung other things this allows the filesystem to hold operations in a
memory cache without actually having to mess with the HAMMER topology
on-disk. The on-disk topology is then updated in a deferred manner.
Disk I/O is entirely avoided for self contained operations which create,
write, and delete related files quickly enough.
* Add unmount sequencing, make mount and df work again.
* Test the reference counting and flushing system on most primary
structures.
* Test basic buffer cache interactions, reading, writing, and lazy
synchronization.
* Start tying VNOPS into the infrastructure. open/close/read/write works
now via the in-memory cache (none of it is synched to the disk topology
yet!). readdir doesn't yet work... the 32 bit cookies are not large
enough.
Peter Avalos [Tue, 20 Nov 2007 00:03:21 +0000 (00:03 +0000)]
FC path inquiry settings.
Obtained-from: FreeBSD
Peter Avalos [Mon, 19 Nov 2007 23:52:10 +0000 (23:52 +0000)]
FC path inquiry settings.
Obtained-from: FreeBSD
Peter Avalos [Mon, 19 Nov 2007 23:29:13 +0000 (23:29 +0000)]
Print out the asc/ascq and description even when both the asc and ascq
are zero. This is so that users will see the "no additional sense" printout
and know that they have the full sense information.
Obtained-from: FreeBSD
Sascha Wildner [Mon, 19 Nov 2007 18:49:06 +0000 (18:49 +0000)]
Remove various references to sysinstall from the system.
Reported-by: Robert Gauthier <rg0@sympatico.ca>
Sascha Wildner [Mon, 19 Nov 2007 18:23:36 +0000 (18:23 +0000)]
Remove old freebsd-tips fortune(6) datfile.
Matthew Dillon [Mon, 19 Nov 2007 00:53:40 +0000 (00:53 +0000)]
HAMMER 3/many - more core infrastructure.
* Add an in-memory B-Tree node abstraction
* Add an in-memory record abstraction.
* Put the B-Tree cursor code in its own source file.
* Fill in more of the VOP code.
* Do a major clean-up of all in-memory structures and some on-disk
structures. All the major in-memory structures now use similarly
named functions.
* Move inter-cluster link from a B-Tree leaf node to a B-Tree internal
node, giving us a left and right boundary to play with. This simplifies
the algorithms by quite a bit.
* Allow the B-Tree to be unbalanced by moving the sub-type from the B-Tree
node header to the B-Tree element structure.
* Revamp the I/O infrastructure, in particular allow B-Tree nodes to be
held passively.
* Implement a flexible B-Tree node cache. References into the B-Tree can
be cached by inodes. If the related buffer is flushed by the system, the
related cache pointers will be cleared.
Peter Avalos [Sun, 18 Nov 2007 19:34:50 +0000 (19:34 +0000)]
Add quirk for SONY SMO drive. This (pre SCSI-2) drive returns a mystic
code when the medium is inserted but not spun up.
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 19:27:29 +0000 (19:27 +0000)]
Fix up unit attention and selection timeout handling.
- change daprevent() to set CAM_RETRY_SELTO and SF_RETRY_UA when it calls
cam_periph_runccb().
- change the pt(4) driver to ignore unit attentions
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 19:16:26 +0000 (19:16 +0000)]
Add sense key table entries for DATA PROTECT and BLANK CHECK. This will
prevent scsi_sense_desc() from deferencing a NULL pointer when a drive
happens to return one of these sense keys.
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 19:11:23 +0000 (19:11 +0000)]
In camperiphscsisenseerror(), don't return an error when the error action
is SS_NOP.
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 19:04:08 +0000 (19:04 +0000)]
Fix typo. SS_START is quite different than SSS_START.
Peter Avalos [Sun, 18 Nov 2007 18:49:53 +0000 (18:49 +0000)]
If we have an error and are booting verbosely, don't be complaining
if this was a non-retryable selection timeout.
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 17:59:54 +0000 (17:59 +0000)]
Fix typo.
Obtained-from: FreeBSD
Peter Avalos [Sun, 18 Nov 2007 17:53:02 +0000 (17:53 +0000)]
Rewrite of the CAM error recovery code.
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
Obtained-from: FreeBSD
Sascha Wildner [Sun, 18 Nov 2007 16:13:31 +0000 (16:13 +0000)]
Remove <net/intrq.h> via 'make upgrade'.
Sascha Wildner [Sun, 18 Nov 2007 14:10:41 +0000 (14:10 +0000)]
Add an altq(9) manpage.
Adapted-from: NetBSD
Reviewed-by: sephe
Sepherosa Ziehau [Sun, 18 Nov 2007 13:00:28 +0000 (13:00 +0000)]
CPU localize dummynet(4) step 2/2:
- Add ip_dn_sockopt() in net/dummynet/ip_dummynet_glue.c, which
o Copy socket option from user space.
o Dispatch get/config/delete/flush operation to CPU ip_dn_cpu, so we don't
even need to enter critical section when iterating pipes/flow_sets or
checking whether dummynet has loaded.
o Copy out information from kernel space to user space.
- Adjust raw_ip.c to call ip_dn_sockopt() instead of checking DUMMYNET_LOADED
and calling ip_dn_ctl_ptr.
- Remove now unnecessary critical section protection, however, replying dn_msg,
setting and clearing ip_dn_io_ptr still need to be protected by critical
section, since dn_msg and ip_dn_io_ptr are touched/checked by systimer
callback.
Sepherosa Ziehau [Sun, 18 Nov 2007 09:53:19 +0000 (09:53 +0000)]
Add a new light weight function to synchronize IPI queues on other CPUs by
broadcasting a NOP IPI to other CPUs; this is used be make sure that all
IPIs before the NOP one are processed.
Use this new function to fix a possible race between kfree() and
malloc_uninit():
kfree() may be in transitting state when malloc_uninit() is running.
Ideas-from: dillon@
Reviewed-by: dillon@
Peter Avalos [Sat, 17 Nov 2007 23:47:17 +0000 (23:47 +0000)]
Fix inquiry length detection for the ses(4) driver.
It was using the inq_len member of the ccb_getdev structure, but that
value was never filled in.
So we now get the length from the inquiry data returned by the drive.
(Since we will fetch as much inquiry data as the drive claims to support.)
Obtained-from: FreeBSD
Peter Avalos [Sat, 17 Nov 2007 22:41:11 +0000 (22:41 +0000)]
Don't use /dev/rXXX names.
Obtained-from: FreeBSD
Peter Avalos [Sat, 17 Nov 2007 20:28:46 +0000 (20:28 +0000)]
Change the peripheral driver list from a linker set to module driven
driver registration. This should allow things like da, sa, cd etc to be
in seperate KLD's to the cam core and make them preloadable.
Obtained-from: FreeBSD
Sepherosa Ziehau [Sat, 17 Nov 2007 09:23:53 +0000 (09:23 +0000)]
Offload the dummynet(4) init/stop work to the netisr on CPU ip_dn_cpu
Sepherosa Ziehau [Sat, 17 Nov 2007 08:30:00 +0000 (08:30 +0000)]
- Move dummynet sysctl tree root from ip_dummynet.c to ip_dummynet_glue.c
- Add tunable to change the CPU that will run dummynet
- Add a read-only sysctl node to show the CPU number that runs dummynet
Sepherosa Ziehau [Sat, 17 Nov 2007 08:07:27 +0000 (08:07 +0000)]
More assertions:
- The mbuf contains pkthdr
- The mbuf has been tagged for dummynet(4)
Sepherosa Ziehau [Sat, 17 Nov 2007 08:05:43 +0000 (08:05 +0000)]
Make sure that the mbuf contains pkthdr.
Peter Avalos [Fri, 16 Nov 2007 22:32:32 +0000 (22:32 +0000)]
Update for less-415.