Michael Neumann [Mon, 25 May 2015 14:45:04 +0000 (17:45 +0300)]
radeon: sync to radeon 3.10
zrj [Mon, 25 May 2015 16:34:57 +0000 (19:34 +0300)]
drm/ttm: revert again to use tree(3)
This reverts
06cbdcf32488e8ce7bf9c345068a9f8d72cf48e2.
Also add RB_ROOT redefine in ttm_bo_driver.h for ttm.
Tomohiro Kusumi [Wed, 27 May 2015 18:33:07 +0000 (03:33 +0900)]
sys/gnu/vfs/ext2fs: Sync with Linux kernel's ext2 definitions
- Note that ext2 on DragonFly seems to be broken currently.
Sascha Wildner [Wed, 27 May 2015 18:36:30 +0000 (20:36 +0200)]
Update libarchive's and liblzma's configuration for recently added stuff.
Make both use futimens() and utimensat(). xz's configure won't check for
futimes() if futimens() is available (hence HAVE_FUTIMES goes back to
undefined).
While here, define HAVE_DIRFD for libarchive too since we have it as a
public function since
de45303d1431339260c3a353a1e18d034c807c4a.
Note that diff and grep also have HAVE_... macros for futimens() and
utimesat() in their config.h's but they are unused in the code, probably
stray configure checks.
Sascha Wildner [Wed, 27 May 2015 16:40:59 +0000 (18:40 +0200)]
<sys/param.h>: Bump __DragonFly_version for futimens() and utimensat().
Dimitris Papastamos [Wed, 27 May 2015 16:28:27 +0000 (17:28 +0100)]
Add missing prototype for futimens(2) in <sys/stat.h>
Fix spacing for utimensat() as well.
Sascha Wildner [Wed, 27 May 2015 16:38:12 +0000 (18:38 +0200)]
<sys/stat.h>: Whitespace cleanup.
Matthew Dillon [Wed, 27 May 2015 16:19:25 +0000 (09:19 -0700)]
kernel - Fix issue w/recent utimes commit
* The repurposed itimerfix() and itimespecfix() functions needed to have
a conditional removed which was putting an arbitrary limit on the tv_sec
field.
* Fixes an issue that caused utimes*() to fail and return EINVAL.
Matthew Dillon [Wed, 27 May 2015 03:00:18 +0000 (20:00 -0700)]
hammer2 - cleanup
* Cleanup a lock/unlock sequence used to force-load chain->data by
replacing it with the appropriate load call.
Matthew Dillon [Tue, 26 May 2015 20:01:25 +0000 (13:01 -0700)]
ttys - Add 'ifconsole' option to ttys entries
* Add the 'ifconsole' option. This allows you to construct a line as shown
below to enable a getty (e.g. on a serial port) only if the tty is the
system console.
ttyd0 "/usr/libexec/getty std.9600" dialup on secure ifconsole
The ifconsole option also silently disables any devices which do not
exist, removing unnecessary console spam.
* Modify libc and init to handle the new flag.
* Modify the nrelease build and ttys defaults to use this option for
ttyd0, ttyd1, ttyd2, and ttyd3.
* Avoids previously reported issues with system crashes on certain machines
whos serial ports are not implemented properly without having to fully
disable the default ttyd* getty feature. If the serial port isn't the
console, it won't be enabled.
* Add a sysctl to the kernel which init needs to test whether a tty is the
console or not.
Suggested-by: swildner
Matthew Dillon [Tue, 26 May 2015 18:03:32 +0000 (11:03 -0700)]
kernel - Return EINVAL on negative timeout to poll()
* Return EINVAL if poll() is called with a negative
timeout, as per manual page.
Submitted-by: stateless
Matthew Dillon [Tue, 26 May 2015 18:00:45 +0000 (11:00 -0700)]
kernel - Sanity-check getutimes().
* Sanity check getutimes() and getutimens()
* Also note futimes commit just before this one was also
Submitted-by: stateless.
Submitted-by: stateless
Matthew Dillon [Tue, 26 May 2015 17:56:19 +0000 (10:56 -0700)]
kernel - Add futimens()
* Add futimens()
* Consolidate the support function to kern_futimens().
Matthew Dillon [Tue, 26 May 2015 17:49:56 +0000 (10:49 -0700)]
kernel - Consolidate kern_utimes() into kern_utimensat()
* Consolidate kern_utimes() into kern_utimensat()
Submitted-by: stateless
John Marino [Tue, 26 May 2015 07:56:49 +0000 (09:56 +0200)]
buildworld: Specify cpp for rpcgen to use rather than fallback
Without the -Y switch, rpcgen will fall back to "cpp" which is guided
by OBJFORMAT environment settings to point at the host cpp from gcc50.
In the later stages of buildworld, we want to use the cpp we just built,
not the host cpp which could have issues. By stage 4, no native host
tools should be in use.
Matthew Dillon [Tue, 26 May 2015 04:42:00 +0000 (21:42 -0700)]
hammer2 - cleanup data load, unlink optimization
* Clean up data loading on chain lock. Use chain flags to interlock data
loading with either a shared or exclusive lock.
* We no longer upgrade a shared lock to exclusive in order to load data,
preventing a potentially unexpected deadlock from occuring.
* Clean up the chain_core (chain->core) structure. Remove flags and
move the main lock from the core to the main chain structure proper.
* Attempt to avoid I/O when unlinking files by not updating the inode
on the final 1->0 transition of nlinks. This greatly reduces the amount
of write I/O occuring during a rm -rf and improves performance by a
factor of 3x.
Matthew Dillon [Mon, 25 May 2015 19:28:09 +0000 (12:28 -0700)]
kernel - Change bundirty() location in I/O sequence (2)
* The bundirty() move interfered with softupdates because
the buf_complete() callback can re-dirty the buffer.
* Fixed by moving the bundirty() prior to the buf_complete()
call.
Reported-by: marino
Matthew Dillon [Mon, 25 May 2015 19:00:29 +0000 (12:00 -0700)]
net80211 - Add dofbsddiff script
* Add helper script to the repo so it isn't lost.
* Helps diff DFly and FBsd 80211 code for work.
Matthew Dillon [Mon, 25 May 2015 16:22:13 +0000 (09:22 -0700)]
hammer2 - stabilization
* Fix more deadlocks. The solution here is not ideal, I'm doing too much
unlocking and relocking of clusters and probably breaking certain atomicy
requirements.
* Implement a delayed flush mechanism when making permanent chain deletions
instead of calling hammer2_flush(). This should allow the flush code to
better optimize-out unnecessary write I/Os.
* Add a spinlock for the ip->cluster (not completed yet).
* I had broken system-initated filesystem syncing by calling vclrisdirty()
on the syncer vnode. Fix it.
John Marino [Mon, 25 May 2015 08:08:41 +0000 (10:08 +0200)]
gcc50: bump version date to 25 May 2015
The base compiler gains all the fixes over the last 5 weeks since
GCC 5.1 was released. This could fix a couple of issues in dports.
John Marino [Mon, 25 May 2015 08:52:09 +0000 (10:52 +0200)]
Merge branch 'vendor/GCC50'
John Marino [Mon, 25 May 2015 08:05:27 +0000 (10:05 +0200)]
Update gcc-50 to SVN version 223641 (gcc-5-branch)
Last Changed Date: 2015-05-25 02:16:10 +0200 (Mon, 25 May 2015)
Sepherosa Ziehau [Sun, 24 May 2015 12:46:53 +0000 (20:46 +0800)]
systat.1: Update sensors display specific commands
Sepherosa Ziehau [Sun, 24 May 2015 12:06:39 +0000 (20:06 +0800)]
ecc.4: Update for the recent ecc(4) changes
Sepherosa Ziehau [Sun, 24 May 2015 11:54:10 +0000 (19:54 +0800)]
memtemp.4: Update for the recent sensor description change
Sepherosa Ziehau [Sun, 24 May 2015 11:51:34 +0000 (19:51 +0800)]
coretemp.4: Update for the recent sensor description change
Matthew Dillon [Mon, 25 May 2015 04:04:25 +0000 (21:04 -0700)]
dirfs - only expose inlines to the kernel
* Only expose inlines to kernel code, user code can get tripped up on
things like KKASSERT().
Matthew Dillon [Mon, 25 May 2015 03:20:39 +0000 (20:20 -0700)]
hammer2 - Refactor cluster locks, syncthr fixes, cleanups
* Do not resolve the cluster when locking and unlocking. This led to
problems when cparents used in iterations were being temporarily unlocked,
because their nodes represent the iteration in the physical topology
so the resolve might fail when relocked.
Instead, resolution occurs with all cluster creation mechanics. So, e.g.
hammer2_cluster_lookup() and hammer2_cluster_next() will resolve the
cluster being returned.
* Change hammer2_cluster_copy() semantics to inherit focus state and not
call hammer2_cluster_resolve(), for the same reason as above.
* A cluster iteration usually returns NULL when the focus is lost, e.g.
when only unsynchronized slaves remain. Add a flag so the sync thread
can iterate the cluster until all nodes are exhausted.
* Cleanup focus handling for the cluster iterator. Move the bref compare
to the resolver and get rid of the manual compare code in the iterator.
* Fix a locking flags bug in the cluster iterator.
* Fix numerous deadlocks. Mostly requires unlocking the whole cluster before
looping the iterator for new elements, so later indexes are not held locked
while working on earlier indexes.
* Fix numerous issues in syncthr, in particular only repoint the index
of the cluster the syncthr is managing when updating the inode to avoid
clashes with inode updates from other syncthrs.
* Change the way HAMMER2_CITEM_INVALID works in syncthr so we can be
more hard-nosed about it in the cluster iterator. Generally speaking
we clear the INVALID bit when synchronizing a new element, even if it is
a recursion and modify_tid cannot be immediately set.
Sascha Wildner [Sun, 24 May 2015 17:34:35 +0000 (19:34 +0200)]
Remove unused bsd.cpu.gcc44.mk file.
Sascha Wildner [Sat, 23 May 2015 07:49:36 +0000 (09:49 +0200)]
kernel/acpi_wmi: Move wmi_info_list into sc.
Taken-from: FreeBSD
Sascha Wildner [Sat, 23 May 2015 07:42:25 +0000 (09:42 +0200)]
vi(1): Remove a no longer used file.
François Tigeot [Sun, 24 May 2015 09:04:12 +0000 (11:04 +0200)]
drm: Add linux/ktime.h
Matthew Dillon [Sun, 24 May 2015 04:19:04 +0000 (21:19 -0700)]
kernel - Add utimensat() support
* Brings in utimensat() from FreeBSD, adjusted for DragonFly system
call mechanics.
Submitted-by: stateless #2818
François Tigeot [Sat, 23 May 2015 17:08:11 +0000 (19:08 +0200)]
drm/i915: Fix a __raw_i915_read32() definition
We don't have pci_iomap() yet so registers can't be properly mapped
in the Linux way.
François Tigeot [Sat, 23 May 2015 06:24:11 +0000 (08:24 +0200)]
drm: Put abs64 definition in the right place
François Tigeot [Sat, 23 May 2015 06:15:04 +0000 (08:15 +0200)]
drm/linux: Add a few smp_mb_xxx_atomic_inc() functions
François Tigeot [Sat, 23 May 2015 06:11:42 +0000 (08:11 +0200)]
linux/i2c.h: Properly define struct device
François Tigeot [Sat, 23 May 2015 06:06:03 +0000 (08:06 +0200)]
drm/linux: Add TASK_COMM_LEN
François Tigeot [Sat, 23 May 2015 06:00:42 +0000 (08:00 +0200)]
drm/linux: Add mod_timer_pinned()
François Tigeot [Sat, 23 May 2015 05:58:41 +0000 (07:58 +0200)]
drm/linux: define destroy_timer_on_stack()
François Tigeot [Sat, 23 May 2015 05:51:07 +0000 (07:51 +0200)]
drm/linux: define ETIME
François Tigeot [Fri, 22 May 2015 20:23:13 +0000 (22:23 +0200)]
drm/linux: Implement DEFINE_MUTEX()
François Tigeot [Fri, 22 May 2015 18:38:34 +0000 (20:38 +0200)]
drm/linux: Add set_pages_uc()
John Marino [Fri, 22 May 2015 16:40:24 +0000 (09:40 -0700)]
WORLD_CCVER: Fix buildworld with clangXX
The backtrace library requires unwind.h to build. This file was never
created, so the base GCC's would fall back to the version in /usr/libdata.
Clang compilers from ports don't have unwind.h so they were failing on the
world build (building gcc50). This modification makes unwind.h available
for backtrace.c and allows the build to complete with WORLD_CCVER=clang36
Matthew Dillon [Fri, 22 May 2015 17:03:48 +0000 (10:03 -0700)]
kernel - Change cpu_idle_hlt default
* Set cpu_idle_hlt default to 1 for Intel Haswell or later cpus. These
cpus do major power management in the HLT instruction.
Leave cpu_idle_hlt default at 2 for AMD cpus or older Intel cpus.
These cpus do not do major management in the HLT instruction and ACPI
entry is required to reduce idle power consumption.
Matthew Dillon [Fri, 22 May 2015 01:48:06 +0000 (18:48 -0700)]
hammer2 - Fix hammer2_cluster_load_async() issue
* Fix a hammer2_cluster_load_async() issue. Old code hardwired the cluster
index to 0, but this might not be a validated chain. Use cluster->focus
instead.
François Tigeot [Thu, 21 May 2015 20:44:00 +0000 (22:44 +0200)]
drm: Improve mutex_lock_interruptible() again
It should really be interruptible by signals
Spotted-by: dillon
François Tigeot [Thu, 21 May 2015 18:47:46 +0000 (20:47 +0200)]
drm/linux: Improve the implementation of mutex_lock_interruptible()
François Tigeot [Thu, 21 May 2015 18:17:59 +0000 (20:17 +0200)]
drm/linux: Add get_page()
Sascha Wildner [Thu, 21 May 2015 16:35:04 +0000 (18:35 +0200)]
ipfw3.8: Some cleanup.
Matthew Dillon [Thu, 21 May 2015 05:18:41 +0000 (22:18 -0700)]
kernel - Change bundirty() location in I/O sequence
* When doing a write BIO, do not bundirty() the buffer prior to issuing
the vn_strategy(). Instead, bundirty() the buffer when the I/O
is complete, primarily in bpdone().
The I/O's data buffer is protected during the operation by vfs_busy_pages(),
so related VM pages cannot be modified while the write is running. And,
of course, the buffer itself is locked exclusively for the duration of the
opeartion. Thus this change should NOT introduce any redirtying races.
* This change ensures that vp->v_rbdirty_tree remains non-empty until all
related write I/Os have completed, removing a race condition for code
which checks vp->v_rbdirty_tree to determine e.g. if a file requires
synchronization or not.
This race could cause problems because the system buffer flusher might
be in the midst of flushing a buffer just as a filesystem decides to
sync and starts checking vp->v_rbdirty_tree.
* This should theoretically fix a long-standing but difficult-to-reproduce
bug in HAMMER1 where a backend flush occurs at an inopportune time.
Matthew Dillon [Thu, 21 May 2015 05:10:45 +0000 (22:10 -0700)]
hammer2 - Per-PFS transaction management
* Replace the global transaction manager with a per-mount transaction
manager.
* Each media volume's spmp (super-root pfs) also gets its own transaction
manager.
* The Filesystem sync now flushes each PFS associated with the mount,
and then flushes the super-root for the related physical volumes.
When flushing the super-root, the flush stops at the PFS transition.
* Interactions on one mount point no longer stall other mount points on
the same media. This also means that freemap updates related to
other mount points may occur while a flush is occuring on one of them.
(might have broken recovery here, will fix in another pass).
* For now keep the syncer interlock vs new modifying operations to ensure
a stable snapshot.
Matthew Dillon [Thu, 21 May 2015 01:04:49 +0000 (18:04 -0700)]
hammer2 - per-node sync threads
* Change the per-pfs sync threads into per-node sync threads. Each sync
thread is responsible for synchronizing its particular node to the
pfs-based cluster when its particular node is out-of-sync.
* Significant work to the cluster iteration code to fix numerous deadlocks.
* Call vclrisdirty() conditionally at end of flush.
* Do not call vclrisdirty() unconditionally in hammer2_vop_fsync().
* Misc cleanups.
François Tigeot [Wed, 20 May 2015 20:00:08 +0000 (22:00 +0200)]
drm/linux: Add seq_puts()
Matthew Dillon [Wed, 20 May 2015 16:35:02 +0000 (09:35 -0700)]
hammer - limit certain diagnostics to 1/sec.
* Limit certain diagnostics that can degenerately print in huge volumes
to the console to one per second.
Sepherosa Ziehau [Thu, 14 May 2015 15:48:43 +0000 (23:48 +0800)]
ecc/e3: Hook up error correction counting into sensors framework.
John Marino [Sun, 5 Apr 2015 11:06:49 +0000 (13:06 +0200)]
HAMMER: Add "hammer abort-cleanup" command
A new command has been added to HAMMER: abort-cleanup. As could be
deduced from its name, this command will terminate all active cleanup
operations. It takes no arguments.
It works by searching the /var/run directory for pidfiles starting with
"hammer.cleanup.". It gets the pid from the filename rather than by
reading the contents of the pidfile. Once the pid is obtained, the
SIGTERM signal is set to it. Any successfully terminated process will
be announced on stdout.
The SIGINT signal could also be used, but this one does not print
"Terminated" on the process's terminal, which I find useful.
Currently if the cleanup is interrupted another way, the pidfile will
not be removed. These hammer.cleanup pidfiles will accumulate until
the next "hammer abort-cleanup" command is executed. Stale pidfiles
will be removed if encountered by abort-cleanup command.
Matthew Dillon [Tue, 19 May 2015 18:49:43 +0000 (11:49 -0700)]
pipe2 - Adjust manual page
* Add a description of pipe2 to the pipe manual page.
Taken-from: FreeBSD
Matthew Dillon [Tue, 19 May 2015 18:46:07 +0000 (11:46 -0700)]
kernel - fix O_CLOEXEC race in open() and fhopen()
* Fix an O_CLOEXEC race where a fork/exec can race an
open(...O_CLOEXEC) and improperly inherit the descriptor.
Matthew Dillon [Tue, 19 May 2015 18:45:09 +0000 (11:45 -0700)]
kernel, libc - add pipe2()
* Add the pipe2() system call.
Tomohiro Kusumi [Tue, 19 May 2015 11:25:30 +0000 (20:25 +0900)]
sbin/usched: Fix man usched(8)
- Add description on when cpumask has multiple bits set.
- e.g. When cpumask is 15 (0xF) then usched(8) first does
usched_set(getpid(), USCHED_SET_CPU, 1, ...) for cpu#0 and then
usched_set(getpid(), USCHED_ADD_CPU, x, ...) for cpu#1,2,3.
# usched -d dfly:15 true
DEBUG: USCHED_SET_SCHEDULER: scheduler: dfly
DEBUG: USCHED_SET_CPU: cpuid: 0
DEBUG: USCHED_ADD_CPU: cpuid: 1
DEBUG: USCHED_ADD_CPU: cpuid: 2
DEBUG: USCHED_ADD_CPU: cpuid: 3
Tomohiro Kusumi [Sun, 17 May 2015 14:53:32 +0000 (23:53 +0900)]
sbin/usched: Make perror show pid/cpu#/scheduler
- Note that the caller's pid (or 0) is the only choice for pid currently.
Tomohiro Kusumi [Sun, 17 May 2015 14:25:07 +0000 (23:25 +0900)]
sbin/usched: Use uint64_t for cpu#
- Use uint64_t for 64 cpus(mask) instead of unsigned long.
Sepherosa Ziehau [Mon, 18 May 2015 12:26:33 +0000 (20:26 +0800)]
ecc/e5: Log error for critical ECC errors
Sepherosa Ziehau [Mon, 18 May 2015 12:21:42 +0000 (20:21 +0800)]
ecc/e5: Remove unused fields
Sascha Wildner [Mon, 18 May 2015 19:20:41 +0000 (21:20 +0200)]
Update the pciconf(8) database.
May 13, 2015 snapshot from http://pciids.sourceforge.net/
François Tigeot [Mon, 18 May 2015 15:24:16 +0000 (17:24 +0200)]
drm/linux: Add uapi/linux/fb.h
Matthew Dillon [Mon, 18 May 2015 05:52:05 +0000 (22:52 -0700)]
kernel - Fix cpu lockup on resume after entering the debugger
* Xcpustop was not testing ipending on resume. Since Xcpustop STIs
it is possible for it to receive further interrupts while stopped
which can cause ipending to be set.
* Use doreti instead of doreti_iret. doreti will test ipending,
fpending, the per-cpu flags.
* Change the semantics to work more similarly to normal interrupt vectors.
* Note that dumping is still problematic.
Matthew Dillon [Mon, 18 May 2015 00:23:50 +0000 (17:23 -0700)]
hammer2 - slave sync work
* Break hammer2_cluster_resolve() into three passes, do a better job
validating the elements of a cluster.
* Fix miscellaneous focus issues in the hammer2_cluster_*() API.
* Acquire required spinlock when doing certain base block array updates.
* Fix miscellaneous recursion bugs in the slave sync thread.
* Fix a panic case when writing embedded data in an inode.
Matthew Dillon [Sun, 17 May 2015 20:24:33 +0000 (13:24 -0700)]
drm - Add chip=
161E8086
* Add chip for broadwell m-5y70
François Tigeot [Sun, 17 May 2015 18:26:31 +0000 (20:26 +0200)]
drm/linux: Add list_for_each_entry_continue()
François Tigeot [Sun, 17 May 2015 18:24:34 +0000 (20:24 +0200)]
drm: Update linux/list.h
Obtained-from: FreeBSD/OFED
Tomohiro Kusumi [Sat, 16 May 2015 23:54:23 +0000 (08:54 +0900)]
usched: Fix man usched_set(2)
- pid 0 is also allowed according to the current implementation.
- EINVAL is returned if
'if (uap->pid != 0 && uap->pid != curthread->td_proc->p_pid)'.
Tomohiro Kusumi [Fri, 15 May 2015 08:17:41 +0000 (17:17 +0900)]
usched: Add comments
Matthew Dillon [Sat, 16 May 2015 20:45:03 +0000 (13:45 -0700)]
swapon - Implement encrypted swap
Implement crypting of the swap device. When enabled in this manner
/dev/urandom is used to generate a 256-bit random key and the base device
is automatically cryptsetup and mapped, making crypted swap trivial.
* Implement the 'crypt' fstab option, so swapon -a and swapoff -a work
as expected for crypted swap. Again, the base device (e.g. /dev/da0s1b)
should be specified. The option will automatically map it with cryptsetup
and swap on the mapping.
Also implement -c to crypt manual swapon/swapoff commands. If used for
swapon it must also be used for swapoff. Again, specify the base device
(e.g. /dev/da0s1b), not the /dev/mapper device, for both cases.
* Implement the 'trim' fstab option, allow trim to be specified in the fstab
instead of requiring a rc.conf option.
* The trim option no longer exits with an error if the device does not
support TRIM or TRIM is not enabled.
Imre Vadász [Sat, 16 May 2015 17:49:39 +0000 (19:49 +0200)]
kernel/acpi_thermal: Improve hw.acpi.thermal.polling_rate sysctl behaviour
* No longer allow setting hw.acpi.thermal.polling_rate to negative or to
meaninglessly large values of more than 3600s.
* Wake up the acpi_tz_thread after changing hw.acpi.thermal.polling_rate,
to wake it up when hw.acpi.thermal.polling_rate was set to 0 (i.e.
disabled polling) or a very large value before.
Imre Vadasz [Sat, 16 May 2015 19:03:07 +0000 (21:03 +0200)]
sysctl_add_oid.9: Document the "IK" sysctl oid format.
Sascha Wildner [Sat, 16 May 2015 10:17:26 +0000 (12:17 +0200)]
kernel/acpi_fadt: Allow FADT revision 6.
Sascha Wildner [Sat, 16 May 2015 08:06:04 +0000 (10:06 +0200)]
Sync ACPICA with Intel's version
20150515.
General changes:
* Runtime argument checking and return value checking for all new
ACPI 6.0 predefined names.
iasl(8) and other tools specific changes:
* Added support for all new ACPI 6.0 predefined names and tables and
for changes to existing tables (FADT, MADT).
* Added a new directive to enable inclusion of binary objects into
ASL code, #includebinary.
* Add support for all new ACPI 6.0 predefined names to acpihelp(8).
* Add new options -d (display iASL preprocessor directives) and
-t (display all known/supported ACPI tables) to acpihelp(8).
For a more detailed list, please see sys/contrib/dev/acpica/changes.txt.
Sascha Wildner [Fri, 15 May 2015 16:44:55 +0000 (18:44 +0200)]
libm: Add a missing closing comment (fixes -Wcomment).
Sascha Wildner [Fri, 15 May 2015 16:43:17 +0000 (18:43 +0200)]
libc: Make generation of nslexer.c more robust.
Quoting FreeBSD's r268620 commit msg:
Ensure that lex errors fail the build instead of being silently ignored
due to the piped call. Also postpone the update of the nslexer.c file
until we are sure we have generated it properly.
[...]
In DragonFly, this issue was causing a buildworld to stall if certain
-W... warning options were added.
Taken-from: FreeBSD
Sepherosa Ziehau [Thu, 14 May 2015 15:42:12 +0000 (23:42 +0800)]
dimm: Allow increasing internal ECC error counter, instead of setting
Sepherosa Ziehau [Thu, 14 May 2015 13:44:39 +0000 (21:44 +0800)]
ecc/e5: Fix error processing on attach path
Sepherosa Ziehau [Thu, 14 May 2015 13:31:48 +0000 (21:31 +0800)]
dimm: Allow ECC error threshold to be configured
Sepherosa Ziehau [Thu, 14 May 2015 13:15:29 +0000 (21:15 +0800)]
dimm/ecc: Send devctl notify if there are too many ECC errors
Tomohiro Kusumi [Wed, 13 May 2015 21:54:24 +0000 (06:54 +0900)]
sys/vfs/tmpfs: Remove duplicated cross-device check on nlink vop
- 'if (dvp->v_mount != vp->v_mount)' which avoids cross-device
hard link appears twice in this function after this one.
- Maybe this should be done in sys/kern/vfs_vopops.c considering
fs that implement nlink have the same check (not sure if it
should be applied to all fs though e.g. unionfs).
# grep -rIl EXDEV sys/vfs/
sys/vfs/smbfs/smbfs_vnops.c
sys/vfs/union/union_vnops.c
sys/vfs/tmpfs/tmpfs_vnops.c
sys/vfs/dirfs/dirfs_vnops.c
sys/vfs/nfs/nfs_serv.c
sys/vfs/nfs/nfs_vnops.c
sys/vfs/hammer2/hammer2_vnops.c
sys/vfs/puffs/puffs_vfsops.c
sys/vfs/puffs/puffs_vnops.c
sys/vfs/ufs/ufs_vnops.c
sys/vfs/msdosfs/msdosfs_vnops.c
sys/vfs/hammer/hammer_vnops.c
Tomohiro Kusumi [Wed, 13 May 2015 01:36:09 +0000 (10:36 +0900)]
sys/vfs/tmpfs: Add comment
- VTOI() was added for userspace (usr.bin/fstat/tmpfs.c).
Sascha Wildner [Wed, 13 May 2015 19:32:07 +0000 (21:32 +0200)]
Ansify a few functions.
Sascha Wildner [Wed, 13 May 2015 17:59:49 +0000 (19:59 +0200)]
ipfw3: Indent two switch()es better and add braces to while().
Sepherosa Ziehau [Wed, 13 May 2015 11:25:31 +0000 (19:25 +0800)]
systat/sensors: Filter sensors based on sensor device name
Sepherosa Ziehau [Wed, 13 May 2015 11:24:36 +0000 (19:24 +0800)]
systat/sensors: Filter sensors based on sensor type
Sepherosa Ziehau [Wed, 13 May 2015 11:24:03 +0000 (19:24 +0800)]
sensor: Add ECC sensor type
Matthew Dillon [Tue, 12 May 2015 22:58:54 +0000 (15:58 -0700)]
kernel - Improve cpu topology text output
* Fix a bug the cpu range display to properly
display e.g. cpu 3 through cpu 3 as cpu 3 instead
of cpu 3-3.
* Makes sysctl hw.cpu_topology more readable.
Tomohiro Kusumi [Tue, 12 May 2015 18:59:04 +0000 (03:59 +0900)]
sys/vfs/tmpfs: Remove nested #ifdef _KERNEL
- #ifdef _KERNEL around function prototypes for tmpfs_subr.c
is nested. It's in another #ifdef _KERNEL.
Sascha Wildner [Tue, 12 May 2015 20:25:07 +0000 (22:25 +0200)]
cryptsetup(8): Remove -std=gcc89 and make getline()'s prototype visible.
Tomohiro Kusumi [Tue, 12 May 2015 01:49:38 +0000 (10:49 +0900)]
sys/vfs/tmpfs: Rename ROOTINO to TMPFS_ROOTINO
- Rename it so that the utility program can distinguish it from UFS's
ROOTINO when they need to include filesystem headers possibly in the
future.
Tomohiro Kusumi [Tue, 12 May 2015 01:10:45 +0000 (10:10 +0900)]
Revert this commit to avoid a possible complaint by compiler when
INVARIANTS is not set which leaves code 'if(cond);'.
Spotted-by: dillon
Revert "sys/vfs/tmpfs: Cleanups"
This reverts commit
215b902242b386e5a01c72d8245df7535bed0bd0.
Tomohiro Kusumi [Tue, 12 May 2015 00:58:57 +0000 (09:58 +0900)]
It only exceeds the limit by small number, so it's ok to do this without a lock.
Take performance than exact accuracy of the #.
Spotted-by: dillon
Revert "sys/vfs/tmpfs: Lock tmpfs_mount member"
This reverts commit
8c24f24ee096861731f6e5a082e22370a972701c.
Tomohiro Kusumi [Tue, 12 May 2015 00:57:44 +0000 (09:57 +0900)]
Reverting series of commits (1/2 and 2/2) since they introduce
performance degrade.
'if ((node->tn_status & TMPFS_NODE_ACCESSED) == 0) {'
can be done without inode lock and helps performance.
Spotted-by: dillon
Revert "sys/vfs/tmpfs: Make flag handling consistent [1/2]"
This reverts commit
e6db94b29aacbd288774574b1967828c8c07c013.
Tomohiro Kusumi [Tue, 12 May 2015 00:49:45 +0000 (09:49 +0900)]
Reverting series of commits (1/2 and 2/2) since they introduce
performance degrade.
'if ((node->tn_status & TMPFS_NODE_ACCESSED) == 0) {'
can be done without inode lock and helps performance.
Spotted-by: dillon
Revert "sys/vfs/tmpfs: Make flag handling consistent [2/2]"
This reverts commit
c595728587e3d04ed27f9c275bddd0eafd6427ce.