Matthew Dillon [Fri, 24 Aug 2012 03:39:05 +0000 (20:39 -0700)]
kernel - Do not allow the time to be set to { 0, 0 }
* The settimeofday() system call now fails with EINVAL if passed
a { 0, 0 } tv structure.
* No need to allow this case, and it may fix some weird pkgsrc bulkbuild
issues. For some reason something in the bulk build calls settimeofday()
with { 0, 0 } when linux.ko/linprocfs are not loaded.
Matthew Dillon [Fri, 24 Aug 2012 03:36:15 +0000 (20:36 -0700)]
fastbulk - Rework and clean up the Makefile
* Rewrite the Makefile. 'make' with no arguments for more information.
* Proactively check and remove a dead /var/db/pkg directory after
each build.
Matthew Dillon [Fri, 24 Aug 2012 00:00:49 +0000 (17:00 -0700)]
linprocfs - Fix process exit / procfs vnode access race & stepping races
* Taken from procfs, fix exit / vnode access races
* Fix stepping races.
Matthew Dillon [Thu, 23 Aug 2012 23:49:08 +0000 (16:49 -0700)]
linprocfs - Fix missing PRELE()s.
* The DFly pfind() API changed a while ago and now PHOLD()s the process,
add missing PRELE()s to linprocfs that were missed during that
change-over.
Reported-by: marino, alexh
Sascha Wildner [Thu, 23 Aug 2012 22:12:00 +0000 (00:12 +0200)]
make_dev.9: devfs_scan_callback() takes an arg to pass to the callback.
Sascha Wildner [Thu, 23 Aug 2012 21:24:22 +0000 (23:24 +0200)]
<sys/devfs.h>: Fix comment typos.
Nuno Antunes [Thu, 23 Aug 2012 07:37:23 +0000 (08:37 +0100)]
msgport.9: Sort cross references alphabetically.
We sort SEE ALSOs first by section, then alphabetically.
Pointed-out-by: swildner
Nuno Antunes [Thu, 23 Aug 2012 07:21:57 +0000 (08:21 +0100)]
msgport.9: Add cross reference to sleep(9).
Nuno Antunes [Wed, 22 Aug 2012 06:47:11 +0000 (07:47 +0100)]
sleep.9: Catch up with spin_{,un}lock_wr() -> spin_{,un}lock() rename of 2 years ago.
* Accordingly rename function names in the ssleep() implementation example.
* We have only exclusive spinlocks, remove the "(write)" reference which was
implicitly suggesting that we have another kind.
* While here, uncapitalize first letter of function a name.
Sepherosa Ziehau [Thu, 23 Aug 2012 05:49:23 +0000 (13:49 +0800)]
vm: Put vm_page_alloc_contig debug prints under vm_contig_verbose
Tunable vm.contig_verbose could be used to control vm_contig_verbose.
It is disabled by default.
Well, it is too verbose even for bootverbose ...
Sepherosa Ziehau [Thu, 23 Aug 2012 05:27:15 +0000 (13:27 +0800)]
jme: Add TSO support
Sepherosa Ziehau [Thu, 23 Aug 2012 03:04:19 +0000 (11:04 +0800)]
route: Routing table is replicated to all CPUs, not # of CPUs on power of 2
DragonFly-bug: http://bugs.dragonflybsd.org/issues/2355
Matthew Dillon [Wed, 22 Aug 2012 23:54:19 +0000 (16:54 -0700)]
kernel - Attempt to fix i386 wire_count panic (98)
* Previous patch missed a code path.
* Cleanup
Matthew Dillon [Wed, 22 Aug 2012 23:44:55 +0000 (16:44 -0700)]
kernel - Fix 32-bit build
* Fix kprintf format mismatches in usched_bsd4.c for 32-bit builds.
Matthew Dillon [Wed, 22 Aug 2012 23:17:01 +0000 (16:17 -0700)]
fastbulk - more work
* Output start and end date stamps
* Do a manual checksum test and delete the distfile if it fails (and the
distfile is over 4 hours old).
* Do a better job deleting conflicting versions of a package.
Matthew Dillon [Wed, 22 Aug 2012 22:07:15 +0000 (15:07 -0700)]
fastbulk - More fixes and improvements
* Fix improper cleaning of the "${BUILDROOT}/usr/obj/work" directory
* Use lockf to lock the wildcard name for a package, serializing the
builds of any related packages so they don't interfere with each
other.
* Clean the work directory on success or failure instead of only on
success, othrewise a large >10G tmpfs is needed.
Matthew Dillon [Wed, 22 Aug 2012 19:40:47 +0000 (12:40 -0700)]
fastbulk - Remove core files & empty dirs from /var/pkg/db
* The presence of a core file prevents the pkg code from properly handling
the directory, causing installs from packages to fail if any dependency
has a broken /var/pkg/db directory.
* Clean out any core files and empty dirs before starting a build.
Sascha Wildner [Wed, 22 Aug 2012 14:30:13 +0000 (16:30 +0200)]
Add an MLINK for KTR_COND_LOG.
While here, sort the msgport.9 MLINKS alphabetically.
Alex Hornung [Wed, 22 Aug 2012 15:20:07 +0000 (15:20 +0000)]
ktr.4 - add note about KTR_USCHED_BSD4
Mihai Carabas [Wed, 22 Aug 2012 10:03:45 +0000 (10:03 +0000)]
usched_bsd4 - Topology-aware scheduling
* Part of "Add SMT/HT awareness to DragonFly BSD scheduler" GSoC
project.
* Details at: http://leaf.dragonflybsd.org/mailarchive/kernel/2012-08/msg00009.html
Mentored-by: Alex Hornung (alexh@)
Sponsored-by: Google Summer of Code 2012
Mihai Carabas [Wed, 22 Aug 2012 10:03:12 +0000 (10:03 +0000)]
vkernel{,64} - CPU topology support
* Part of "Add SMT/HT awareness to DragonFly BSD scheduler" GSoC
project.
* Details at: http://leaf.dragonflybsd.org/mailarchive/kernel/2012-08/msg00009.html
Mentored-by: Alex Hornung (alexh@)
Sponsored-by: Google Summer of Code 2012
Mihai Carabas [Wed, 22 Aug 2012 10:02:58 +0000 (10:02 +0000)]
CPU topology support
* Part of "Add SMT/HT awareness to DragonFly BSD scheduler" GSoC
project.
* Details at: http://leaf.dragonflybsd.org/mailarchive/kernel/2012-08/msg00009.html
Mentored-by: Alex Hornung (alexh@)
Sponsored-by: Google Summer of Code 2012
Mihai Carabas [Wed, 22 Aug 2012 13:07:18 +0000 (13:07 +0000)]
ktr - add KTR_COND_LOG
* KTR_COND_LOG provides conditional logging; the second parameter passed
in is a condition which determines whether the entry is logged or
not.
* It provides a neater way to log conditionally than having to wrap a
KTR in an if, which may then end up being empty if KTR is disbled.
Sascha Wildner [Wed, 22 Aug 2012 13:18:31 +0000 (15:18 +0200)]
msgport.9: Fix some minor mdoc issues.
Matthew Dillon [Wed, 22 Aug 2012 06:46:58 +0000 (23:46 -0700)]
fastbulk - Adjustments to fix various issues (2)
* Use tmpfs for /usr/obj, this speeds up builds by a lot.
make w/ -DNOTMPFS will use the hard drive if your tmpfs
isn't big enough.
* Cleanup {chroot}/tmp/logs/run/* when restarting
* When restarting handle the case where the correct package has
already been installed.
* When restarting handle the case where the binary package already
exists.
* Use pkg_add -f when adding existing packages.
Matthew Dillon [Wed, 22 Aug 2012 05:18:40 +0000 (22:18 -0700)]
fastbulk - Adjustments to fix various issues
* We weren't properly installing the binary packages we were creating,
resulting in parallel build races. Fixing this fixes most of the
issues fastbulk was having.
* Change the way pkgsrc is mounted... copy it to /build/fastbulk and add
code to ensure that it is clean.
* resident the bmake binary to speed things up a bit.
Matthew Dillon [Wed, 22 Aug 2012 05:15:47 +0000 (22:15 -0700)]
kernel - Attempt to fix i386 wire_count panic
* Finally found what could be the issue. get_pv_entry() calls zalloc()
which can fall through to zget() which obtains a zalloc-related LWKT
token.
This can temporarily break the vm_token and allow another thread to get
in and change the pmap pte entry out from under a pmap_enter(), causing
the pmap_enter() to potentially remove an extra wire_count from the
page table page.
* Fix by pre-allocating the pv entry, taking it out of the critical path,
and adjusting a few other bits of code to test the *pte closer to
the code which replaces it for the purposes of adjusting the wire_count.
Sepherosa Ziehau [Wed, 22 Aug 2012 01:23:09 +0000 (09:23 +0800)]
jme: Let the software to check hardware supplied hash
As far as I have tested, these chips could generate wrong hash under
certain situation.
Sepherosa Ziehau [Wed, 22 Aug 2012 01:19:25 +0000 (09:19 +0800)]
ether: Add instrument to detect wrong hardware supplied hash
If wrong hardware supplied hash is detected, the packet will be
redispatched to the correct netisr
Sascha Wildner [Tue, 21 Aug 2012 18:57:19 +0000 (20:57 +0200)]
kernel/linprocfs: Fix accessing files in /proc (such as /proc/meminfo).
It is the same fix that was applied to procfs with
198c0ff2.
Sascha Wildner [Tue, 21 Aug 2012 20:44:09 +0000 (22:44 +0200)]
kernel/linprocfs: Fix a panic when accessing /proc/<pid>/maps.
Analogous to procfs.
François Tigeot [Tue, 21 Aug 2012 19:42:33 +0000 (21:42 +0200)]
ixgbe: Rework ixgbe_xmit()
* Use bus_dmamap_load_mbuf_segment()
* Clean up error handling code, following the example of the igb(4)
driver
Sascha Wildner [Tue, 21 Aug 2012 15:39:02 +0000 (17:39 +0200)]
kernel/procfs: Remove some unneeded parentheses.
Sascha Wildner [Tue, 21 Aug 2012 13:04:43 +0000 (15:04 +0200)]
kernel/linprocfs: Remove an unreached return.
Sascha Wildner [Tue, 21 Aug 2012 00:02:12 +0000 (02:02 +0200)]
tools: Remove old script for installing 3rd party source drivers.
Nuno Antunes [Tue, 14 Aug 2012 17:48:10 +0000 (18:48 +0100)]
mdoc: Add a msgport(9) manual page documenting LWKT message passing interface.
Sepherosa Ziehau [Tue, 21 Aug 2012 02:45:01 +0000 (10:45 +0800)]
ip: Put fast dispatch/slow dispatch and hashing done by IP under RSS_DEBUG
While im here, using atomic operation to increment debug counters
John Marino [Mon, 20 Aug 2012 19:27:06 +0000 (21:27 +0200)]
rtld: Perform reloc before filtree dependency object init
Ensure that for the object which is a dependency of some filtree,
relocations are performed before the object's initializer is called.
While dlopen()ing an object, relocate the whole DAG rooted in the
object instead of only relocating the object itself and list of newly
loaded dependencies.
Reversed sequence currently can occur if the same object is a
dependency for both filtree and filter since filtrees are loaded typically
during the relocation processing when some filter dependencies might be
already loaded but not yet relocated.
Taken-from: FreeBSD SVN 237659 (27 June 2012)
John Marino [Mon, 20 Aug 2012 18:26:43 +0000 (20:26 +0200)]
rtld: Delay DF_1_NODELETE process until object DAG loaded
The current code can miss searching dependencies that haven't been loaded
yet. Delay DF_1_NODELETE processing until object DAG is fully loaded.
Taken-from: FreeBSD SVN 239253 (14 Aug 2012)
François Tigeot [Mon, 20 Aug 2012 06:17:29 +0000 (08:17 +0200)]
kernel: Set kern.ipc.shm_use_phys to 1 by default
* The only known user of SYSV shared memory is PostgreSQL
* It really needs physical allocation to perform well with high
numbers of clients
* Physical allocation is now used by default
Sepherosa Ziehau [Sun, 19 Aug 2012 23:53:11 +0000 (07:53 +0800)]
jme: Cache align RX/TX data structure
Sepherosa Ziehau [Sun, 19 Aug 2012 23:43:11 +0000 (07:43 +0800)]
jme: Only main serializer is needed for timeout callback
This reduces periodic contention against TX/RX path.
Antonio Huete Jimenez [Wed, 15 Aug 2012 01:19:51 +0000 (03:19 +0200)]
dhclient - Assume link is up when IFM_AVALID isn't set.
- This is what the late interface_link_status() did.
- Allows drivers who cannot tell what the link state is to get
dhcp leases.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 15 Aug 2012 01:15:12 +0000 (03:15 +0200)]
dhclient - Have only one timeout at once.
- Terminate with extreme prejudice the multiple timeout queuing
mechanism that was a holdover from when dhclient handled multiple
interfaces at once.
- Also move calculation of current time to just before check to see
if the timeout has expired.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 14 Aug 2012 23:06:26 +0000 (01:06 +0200)]
dhclient - Add some more paranoia and make code clearer.
- Check that the required length field for the option
is present before using it. Reject lease if no length
field is present.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 14 Aug 2012 22:54:02 +0000 (00:54 +0200)]
dhclient - Delete trailing NUL's when parsing NVT ASCII options.
- RFC 2132 says "Options containing NVT ASCII data SHOULD NOT include
a trailing NULL; however, the receiver of such options MUST be
prepared to delete trailing nulls if they exist."
- Should fix odd results when 'append'ing info to such options via
dhclient.conf.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 14 Aug 2012 22:44:47 +0000 (00:44 +0200)]
dhclient - Nuke interface_link_status().
- Make use of interface_status() (check IFF_UP|IFF_RUNNING
and media status). The interface is forced up when dhclient
starts so the flags should be correct.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 19:08:44 +0000 (21:08 +0200)]
dhclient - Change return code test logic.
Taken from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 19:05:11 +0000 (21:05 +0200)]
dhclient - Set state to S_REBOOTING when calling state_reboot().
- Also set state inside state_reboot() to S_INIT when calling
state_init(). Rather than the other way around.
Makes for more consistant idiom and might reduce state confusion.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 18:59:03 +0000 (20:59 +0200)]
dhclient - Cancel all timeouts in state_reboot().
- We can get there from any state if a link state change happens.
Fixes a problem where we'd continue to send (corrupted) discover
packets after binding.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 18:55:19 +0000 (20:55 +0200)]
dhclient - Try harder to re-initialize parsing state.
- Attempt that nothing accidentally carries over when
a new file (i.e. leases after config) is parsed.
May help with mysterious "Corrupt lease file" messages.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 18:47:39 +0000 (20:47 +0200)]
dhclient - Tweak parsing.
- No need to declare, assign and then ignore the token
value when only the token id is required.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 18:36:23 +0000 (20:36 +0200)]
dhclient - Tweak leases file handling.
- Write out new leases file every time a lease is obtained. i.e. don't
append 20 leases before cleaning it up.
- Write new leases file after calling dhclient-script to implement
new info. Gets interface configured first, and makes it more likely
the leases file reflects most current configuration.
Taken-from: OpenBSD
Antonio Huete Jimenez [Sat, 4 Aug 2012 18:23:47 +0000 (20:23 +0200)]
dhclient - Sequential options processing more friendly.
- Starting DHCP packet options with DHO_DHCP_MESSAGE_TYPE. Now
DHCP-specific options always come after the option identifying
the packet as DHCP rather than BOOTP. Makes at least Nortel NetIP
DHCP server happier. Clean up some code and parameter passing.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 23:26:33 +0000 (01:26 +0200)]
dhclient - Only warn on unknown options when appropiate.
- By default we ignore unknown dhcp server options, so don't bother
warning unless we ask dhclient to reject leases with unknown options.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 23:07:20 +0000 (01:07 +0200)]
dhclient - Properly handle zero-length option hints.
- There was a possible division by zero if a server
sends us a broken option hints for the proper fix.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 22:55:50 +0000 (00:55 +0200)]
dhclient - Remove wrong processing of option 33 (static routes).
- We are incorrectly processing option 33 (static route), treating
is as a host route rather than a classful network route. Too much
trouble to fix such an obsolete feature, so ignore option 33 info.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 22:46:34 +0000 (00:46 +0200)]
dhclient-script(8) - Align man page with current reality.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 22:31:40 +0000 (00:31 +0200)]
dhclient - Stray '$medium' missed in last commit.
Taken-from: OpenBSD
Antonio Huete Jimenez [Fri, 3 Aug 2012 22:26:45 +0000 (00:26 +0200)]
dhclient - Drop medium/alias useless utilization.
- Dump some useless calls to dhclient-script. i.e. MEDIUM, PREINIT,
ARPSEND, ARPCHECK. Drop support for 'media', 'medium' and 'alias'
specifications in dhclient.conf.
- Old leases still parse but these options now have no effect.
- Be more polite and decline all offers we don't accept.
- Fix a IMSG length check.
- Many expressions of support at various bars.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 19:26:34 +0000 (21:26 +0200)]
dhclient - Fix interval handling.
- Start at initial_interval instead of exponentially backed
off initial_interval.
- Don't hallucinate that we can send ARP packets without waiting.
- Don't claim to be waiting for ARP packets when not doing so.
- Correctly detect expiry of selecting period.
- Speeds up negotiations.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 19:17:32 +0000 (21:17 +0200)]
dhclient.conf(5) - New sentence, new line.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 19:15:43 +0000 (21:15 +0200)]
dhclient.conf(5) - Few fixes. Reword a sentence.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 18:15:28 +0000 (20:15 +0200)]
dhclient - Make sure an interface is registered before we start using it.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 18:13:02 +0000 (20:13 +0200)]
dhclient - Add and ignore DHCP option 66/0x42 TFTP server name.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 17:55:19 +0000 (19:55 +0200)]
dhclient(8) - Remove NOTES section.
Taken from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 17:39:08 +0000 (19:39 +0200)]
dhclient - Add 'egress' command-line option.
- It can be used to refetch a lease without remembering
which interface dhclient was actually active on.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 09:50:39 +0000 (11:50 +0200)]
dhclient - Remove unused function.
Taken-from: OpenBSD
Antonio Huete Jimenez [Thu, 2 Aug 2012 09:46:36 +0000 (11:46 +0200)]
dhclient - Use strdup() instead of malloc/strlcpy.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 19:43:24 +0000 (21:43 +0200)]
dhclient - Be more strict in check_option().
ISC dhclient had a buffer overflow: http://www.kb.cert.org/vuls/id/410676 and
while our dhclient is not vulnerable to that, it got us looking at how the
subnet mask option is handled.
This limits specific ip address options to length 4 in conformance with RFC 2132.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 19:25:29 +0000 (21:25 +0200)]
dhclient - Silence dhclient by immediately exiting if the interface doesn't exist.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 19:12:15 +0000 (21:12 +0200)]
dhclient - Make room for trailing \0 on prepend/append for dhcp options.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 19:07:59 +0000 (21:07 +0200)]
dhclient - Use addr_eq() when possible.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 19:06:34 +0000 (21:06 +0200)]
dhclient - Lets state_panic() check the rest of valid leases.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 18:36:59 +0000 (20:36 +0200)]
dhclient - Print out debug messages only when DEBUG is defined.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 18:10:47 +0000 (20:10 +0200)]
dhclient - Remove unneeded ARGSUSED
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 18:06:32 +0000 (20:06 +0200)]
dhclient - Fix old bug that could cause lease mangling.
Taken-from: OpenBSD
Antonio Huete Jimenez [Wed, 1 Aug 2012 17:51:25 +0000 (19:51 +0200)]
dhclient - Error out if _dhcp user is missing.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 20:29:29 +0000 (22:29 +0200)]
dhclient - Add 6-byte MAC address to the log entries for DHCP ACK/NAK/OFFER.
- Log the packets before checking the client state. Makes it easy to find
MACs for 'surprise' DHCP servers.
- Swap ifi status check logic to be the first one.
Antonio Huete Jimenez [Tue, 31 Jul 2012 20:05:41 +0000 (22:05 +0200)]
dhclient - Improve comment about resolv.conf creation.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 19:59:00 +0000 (21:59 +0200)]
dhclient - Term consistency about the config script.
- Also fix manpage section for dhclient-scripts.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 19:53:54 +0000 (21:53 +0200)]
dhclient - Fix typo.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 19:53:05 +0000 (21:53 +0200)]
dhclient - Clarify discussion of option modifiers.
They only affect values passed to dhclient-script. Our default script
only uses a few options so others are unaffected by option modifiers.
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 19:44:12 +0000 (21:44 +0200)]
dhclient - Fix spurious 'got link'
Taken-from: OpenBSD
Antonio Huete Jimenez [Tue, 31 Jul 2012 19:28:36 +0000 (21:28 +0200)]
dhclient - Fix OpenBSD CVS ids to match current version.
Also remove DFly ones.
Sascha Wildner [Sun, 19 Aug 2012 11:53:39 +0000 (13:53 +0200)]
posix_memalign.3: Uncomment conformance sentence for aligned_alloc().
Sepherosa Ziehau [Sun, 19 Aug 2012 07:56:21 +0000 (15:56 +0800)]
jme: Don't immediately recycle the TX descriptor even if it is owned by us.
This chip will always update the TX descriptor's 32bits fields in order,
so even if the status field has been updated, i.e. OWN is cleared, it still
does not mean that the buflen field has been updated. To avoid this race
we don't immediately recycle the currently checking TX descriptor. Instead,
next TX descriptor's OWN bit is checked, if it is cleared, then the updating
of the currently checked TX descrptor is really done.
This is intended to fix the seldom watchdog timeout that was observed on this
chip.
Thank devinchiu@jmicron.com very much for providing necessary information.
Sascha Wildner [Thu, 16 Aug 2012 17:53:40 +0000 (19:53 +0200)]
unlock_return.cocci: Add vm_object_{hold,drop}().
Sascha Wildner [Sat, 18 Aug 2012 22:26:20 +0000 (00:26 +0200)]
Add running 'mandoc -Tlint' to the manlint target.
Also ignore the exit status here.
Suggested-by: nant
Sascha Wildner [Sat, 18 Aug 2012 22:23:14 +0000 (00:23 +0200)]
Suppress printing of the commands for the manlint target.
Sascha Wildner [Sat, 18 Aug 2012 22:10:48 +0000 (00:10 +0200)]
libc: Comment out documentation of svc_control() which we don't have.
Sepherosa Ziehau [Sat, 18 Aug 2012 07:17:50 +0000 (15:17 +0800)]
bce: Dispatch callouts to interrupt's target CPU
Sepherosa Ziehau [Sat, 18 Aug 2012 06:49:37 +0000 (14:49 +0800)]
bce: Rework MSI checkout for 5706 and 5708
Sepherosa Ziehau [Sat, 18 Aug 2012 03:16:47 +0000 (11:16 +0800)]
bge: Use MPSAFE callout
Sepherosa Ziehau [Sat, 18 Aug 2012 03:15:44 +0000 (11:15 +0800)]
bge: Always configure MII mode register
Sepherosa Ziehau [Sat, 18 Aug 2012 02:29:18 +0000 (10:29 +0800)]
bnx: Enable 500Khz MII management interface frequency
This stablizes MII read/write, thus avoid MII probing failure
Reported-by: jaydg on #dragonflybsd
Tested-by: jaydg on #dragonflybsd
Matthew Dillon [Fri, 17 Aug 2012 19:40:09 +0000 (12:40 -0700)]
kernel - Fix condvar races
* Interlocked sleep was not using the PINTERLOCKED flag.
* Misc other adjustments.
Matthew Dillon [Fri, 17 Aug 2012 19:39:14 +0000 (12:39 -0700)]
puffs - Comment out namecache purge for now
* Comment out a namecache purge that deadlocks for now.
Sepherosa Ziehau [Fri, 17 Aug 2012 15:13:33 +0000 (23:13 +0800)]
pci: Enable PCIe memory mapped configuration again
bd7ad9e91e71693907a00c74ab8dfc457cd655c9 should have fixed the
system hanging seen by y0netan1@
Sepherosa Ziehau [Fri, 17 Aug 2012 15:10:46 +0000 (23:10 +0800)]
pci: Disable memory address decoding before writing 0xffffffff to BAR
This makes PCIe memory mapped configuration works.
Submitted-by: Romick Romick
Tested-by: y0netan1@