1 /**************************************************************************
3 Copyright (c) 2001-2003, Intel Corporation
6 Redistribution and use in source and binary forms, with or without
7 modification, are permitted provided that the following conditions are met:
9 1. Redistributions of source code must retain the above copyright notice,
10 this list of conditions and the following disclaimer.
12 2. Redistributions in binary form must reproduce the above copyright
13 notice, this list of conditions and the following disclaimer in the
14 documentation and/or other materials provided with the distribution.
16 3. Neither the name of the Intel Corporation nor the names of its
17 contributors may be used to endorse or promote products derived from
18 this software without specific prior written permission.
20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 POSSIBILITY OF SUCH DAMAGE.
32 ***************************************************************************/
34 /*$FreeBSD: src/sys/dev/em/if_em.h,v 1.1.2.13 2003/06/09 21:43:41 pdeuskar Exp $*/
35 /*$DragonFly: src/sys/dev/netif/em/if_em.h,v 1.4 2004/03/17 04:59:41 dillon Exp $*/
37 #ifndef _EM_H_DEFINED_
38 #define _EM_H_DEFINED_
41 #include <sys/param.h>
42 #include <sys/systm.h>
44 #include <sys/protosw.h>
45 #include <sys/socket.h>
46 #include <sys/malloc.h>
47 #include <sys/kernel.h>
48 #include <sys/sockio.h>
49 #include <sys/endian.h>
52 #include <net/if_arp.h>
53 #include <net/ethernet.h>
54 #include <net/if_dl.h>
55 #include <net/if_media.h>
58 #include <net/if_types.h>
59 #include <net/vlan/if_vlan_var.h>
61 #include <netinet/in_systm.h>
62 #include <netinet/in.h>
63 #include <netinet/ip.h>
64 #include <netinet/tcp.h>
65 #include <netinet/udp.h>
68 #include <machine/bus.h>
70 #include <machine/resource.h>
73 #include <machine/clock.h>
74 #include <bus/pci/pcivar.h>
75 #include <bus/pci/pcireg.h>
77 #include <sys/sysctl.h>
85 * EM_MAX_TXD: Maximum number of Transmit Descriptors
86 * Valid Range: 80-256 for 82542 and 82543-based adapters
89 * This value is the number of transmit descriptors allocated by the driver.
90 * Increasing this value allows the driver to queue more transmits. Each
91 * descriptor is 16 bytes.
93 #define EM_MAX_TXD 256
96 * EM_MAX_RXD - Maximum number of receive Descriptors
97 * Valid Range: 80-256 for 82542 and 82543-based adapters
100 * This value is the number of receive descriptors allocated by the driver.
101 * Increasing this value allows the driver to buffer more incoming packets.
102 * Each descriptor is 16 bytes. A receive buffer is also allocated for each
103 * descriptor. The maximum MTU size is 16110.
106 #define EM_MAX_RXD 256
109 * EM_TIDV - Transmit Interrupt Delay Value
110 * Valid Range: 0-65535 (0=off)
112 * This value delays the generation of transmit interrupts in units of
113 * 1.024 microseconds. Transmit interrupt reduction can improve CPU
114 * efficiency if properly tuned for specific network traffic. If the
115 * system is reporting dropped transmits, this value may be set too high
116 * causing the driver to run out of available transmit descriptors.
121 * EM_TADV - Transmit Absolute Interrupt Delay Value (Not valid for 82542/82543/82544)
122 * Valid Range: 0-65535 (0=off)
124 * This value, in units of 1.024 microseconds, limits the delay in which a
125 * transmit interrupt is generated. Useful only if EM_TIDV is non-zero,
126 * this value ensures that an interrupt is generated after the initial
127 * packet is sent on the wire within the set amount of time. Proper tuning,
128 * along with EM_TIDV, may improve traffic throughput in specific
129 * network conditions.
134 * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer)
135 * Valid Range: 0-65535 (0=off)
137 * This value delays the generation of receive interrupts in units of 1.024
138 * microseconds. Receive interrupt reduction can improve CPU efficiency if
139 * properly tuned for specific network traffic. Increasing this value adds
140 * extra latency to frame reception and can end up decreasing the throughput
141 * of TCP traffic. If the system is reporting dropped receives, this value
142 * may be set too high, causing the driver to run out of available receive
145 * CAUTION: When setting EM_RDTR to a value other than 0, adapters
146 * may hang (stop transmitting) under certain network conditions.
147 * If this occurs a WATCHDOG message is logged in the system event log.
148 * In addition, the controller is automatically reset, restoring the
149 * network connection. To eliminate the potential for the hang
150 * ensure that EM_RDTR is set to 0.
155 * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544)
156 * Valid Range: 0-65535 (0=off)
158 * This value, in units of 1.024 microseconds, limits the delay in which a
159 * receive interrupt is generated. Useful only if EM_RDTR is non-zero,
160 * this value ensures that an interrupt is generated after the initial
161 * packet is received within the set amount of time. Proper tuning,
162 * along with EM_RDTR, may improve traffic throughput in specific network
169 * This parameter controls the maximum no of times the driver will loop
173 #define EM_MAX_INTR 3
176 * Inform the stack about transmit checksum offload capabilities.
178 #define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP)
181 * This parameter controls the duration of transmit watchdog timer.
183 #define EM_TX_TIMEOUT 5 /* set to 5 seconds */
186 * This parameter controls when the driver calls the routine to reclaim
187 * transmit descriptors.
189 #define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8
192 * This parameter controls whether or not autonegotation is enabled.
193 * 0 - Disable autonegotiation
194 * 1 - Enable autonegotiation
196 #define DO_AUTO_NEG 1
199 * This parameter control whether or not the driver will wait for
200 * autonegotiation to complete.
201 * 1 - Wait for autonegotiation to complete
202 * 0 - Don't wait for autonegotiation to complete
204 #define WAIT_FOR_AUTO_NEG_DEFAULT 1
207 * EM_MASTER_SLAVE is only defined to enable a workaround for a known compatibility issue
208 * with 82541/82547 devices and some switches. See the "Known Limitations" section of
209 * the README file for a complete description and a list of affected switches.
211 * 0 = Hardware default
214 * 3 = Auto master/slave
216 /* #define EM_MASTER_SLAVE 2 */
218 /* Tunables -- End */
220 #define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
221 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
224 #define EM_VENDOR_ID 0x8086
225 #define EM_MMBA 0x0010 /* Mem base address */
226 #define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1))
228 #define EM_JUMBO_PBA 0x00000028
229 #define EM_DEFAULT_PBA 0x00000030
230 #define EM_SMARTSPEED_DOWNSHIFT 3
231 #define EM_SMARTSPEED_MAX 15
234 #define MAX_NUM_MULTICAST_ADDRESSES 128
235 #define PCI_ANY_ID (~0U)
236 #define ETHER_ALIGN 2
238 /* Defines for printing debug information */
240 #define DEBUG_IOCTL 0
243 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
244 #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
245 #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
246 #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
247 #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
248 #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
249 #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
250 #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
251 #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
254 /* Supported RX Buffer Sizes */
255 #define EM_RXBUFFER_2048 2048
256 #define EM_RXBUFFER_4096 4096
257 #define EM_RXBUFFER_8192 8192
258 #define EM_RXBUFFER_16384 16384
262 #define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va))
263 #endif /* __alpha__ */
265 /* ******************************************************************************
268 * This array contains the list of Subvendor/Subdevice IDs on which the driver
271 * ******************************************************************************/
272 typedef struct _em_vendor_info_t {
273 unsigned int vendor_id;
274 unsigned int device_id;
275 unsigned int subvendor_id;
276 unsigned int subdevice_id;
286 typedef enum _XSUM_CONTEXT_T {
293 struct em_int_delay_info {
294 struct adapter *adapter; /* Back-pointer to the adapter struct */
295 int offset; /* Register offset to read/write */
296 int value; /* Current value in usecs */
299 /* For 82544 PCIX Workaround */
300 typedef struct _ADDRESS_LENGTH_PAIR
304 } ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR;
306 typedef struct _DESCRIPTOR_PAIR
308 ADDRESS_LENGTH_PAIR descriptor[4];
310 } DESC_ARRAY, *PDESC_ARRAY;
312 /* Our adapter structure */
314 struct arpcom interface_data;
315 struct adapter *next;
316 struct adapter *prev;
319 /* FreeBSD operating-system-specific structures */
320 struct em_osdep osdep;
322 struct resource *res_memory;
323 struct resource *res_ioport;
324 struct resource *res_interrupt;
325 void *int_handler_tag;
326 struct ifmedia media;
327 struct callout_handle timer_handle;
328 struct callout_handle tx_fifo_timer_handle;
332 /* Info about the board itself */
334 u_int8_t link_active;
335 u_int16_t link_speed;
336 u_int16_t link_duplex;
337 u_int32_t smartspeed;
338 struct em_int_delay_info tx_int_delay;
339 struct em_int_delay_info tx_abs_int_delay;
340 struct em_int_delay_info rx_int_delay;
341 struct em_int_delay_info rx_abs_int_delay;
343 XSUM_CONTEXT_T active_checksum_context;
346 * Transmit definitions
348 * We have an array of num_tx_desc descriptors (handled
349 * by the controller) paired with an array of tx_buffers
350 * (at tx_buffer_area).
351 * The index of the next available descriptor is next_avail_tx_desc.
352 * The number of remaining tx_desc is num_tx_desc_avail.
354 struct em_tx_desc *tx_desc_base;
355 u_int32_t next_avail_tx_desc;
356 u_int32_t oldest_used_tx_desc;
357 volatile u_int16_t num_tx_desc_avail;
358 u_int16_t num_tx_desc;
360 struct em_buffer *tx_buffer_area;
363 * Receive definitions
365 * we have an array of num_rx_desc rx_desc (handled by the
366 * controller), and paired with an array of rx_buffers
367 * (at rx_buffer_area).
368 * The next pair to check on receive is at offset next_rx_desc_to_check
370 struct em_rx_desc *rx_desc_base;
371 u_int32_t next_rx_desc_to_check;
372 u_int16_t num_rx_desc;
373 u_int32_t rx_buffer_len;
374 struct em_buffer *rx_buffer_area;
380 u_int16_t tx_fifo_head;
382 struct sysctl_ctx_list sysctl_ctx;
383 struct sysctl_oid *sysctl_tree;
385 /* Misc stats maintained by the driver */
386 unsigned long dropped_pkts;
387 unsigned long mbuf_alloc_failed;
388 unsigned long mbuf_cluster_failed;
389 unsigned long no_tx_desc_avail1;
390 unsigned long no_tx_desc_avail2;
391 u_int64_t tx_fifo_reset;
392 u_int64_t tx_fifo_wrk;
394 /* For 82544 PCIX Workaround */
395 boolean_t pcix_82544;
399 unsigned long no_pkts_avail;
400 unsigned long clean_tx_interrupts;
403 struct em_hw_stats stats;
406 #endif /* _EM_H_DEFINED_ */