2 * Copyright (c) 1999, 2000 Udo Schweigert. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
16 * 4. Altered versions must be plainly marked as such, and must not be
17 * misrepresented as being the original software and/or documentation.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 *---------------------------------------------------------------------------
33 * i4b_ifpnp_avm.c: AVM Fritz!Card PnP hardware driver
34 * ---------------------------------------------------
36 * $FreeBSD: src/sys/i4b/layer1/ifpnp/i4b_ifpnp_avm.c,v 1.5.2.1 2001/08/10 14:08:37 obrien Exp $
37 * $DragonFly: src/sys/net/i4b/layer1/ifpnp/i4b_ifpnp_avm.c,v 1.5 2004/09/16 04:36:32 dillon Exp $
39 * last edit-date: [Fri Jan 12 17:05:28 2001]
41 *---------------------------------------------------------------------------*/
43 #include "use_ifpnp.h"
48 #include <sys/param.h>
49 #include <sys/kernel.h>
50 #include <sys/systm.h>
53 #include <machine/bus.h>
57 #include <bus/isa/isavar.h>
59 #include <sys/socket.h>
62 #include <net/i4b/include/machine/i4b_debug.h>
63 #include <net/i4b/include/machine/i4b_ioctl.h>
64 #include <net/i4b/include/machine/i4b_trace.h>
66 #include "../../include/i4b_global.h"
67 #include "../../include/i4b_mbuf.h"
69 #include "../i4b_l1.h"
70 #include "../isic/i4b_isic.h"
71 #include "../isic/i4b_isac.h"
72 #include "../isic/i4b_hscx.h"
74 #include "i4b_ifpnp_ext.h"
77 static void avm_pnp_intr(void *);
78 static void hscx_write_reg(int, u_int, struct l1_softc *, u_int);
79 static void hscx_write_reg_val(int, u_int, u_int8_t, struct l1_softc *);
80 static u_int hscx_read_reg(int, u_int, struct l1_softc *);
81 static void hscx_read_fifo(int, void *, size_t, struct l1_softc *);
82 static void hscx_write_fifo(int, void *, size_t, struct l1_softc *);
83 static void avm_pnp_hscx_int_handler(struct l1_softc *);
84 static void avm_pnp_hscx_intr(int, u_int, u_int, struct l1_softc *);
85 static void avm_pnp_init_linktab(struct l1_softc *);
86 static void avm_pnp_bchannel_setup(int, int, int, int);
87 static void avm_pnp_bchannel_start(int, int);
88 static void avm_pnp_hscx_init(struct l1_softc *, int, int);
89 static void avm_pnp_bchannel_stat(int, int, bchan_statistics_t *);
90 static void avm_pnp_set_linktab(int, int, drvr_link_t *);
91 static isdn_link_t * avm_pnp_ret_linktab(int, int);
92 static int avm_pnp_probe(device_t);
93 static int avm_pnp_hscx_fifo(l1_bchan_state_t *, struct l1_softc *);
94 int avm_pnp_attach(device_t);
95 static void ifpnp_isac_intr(struct l1_softc *sc);
97 static device_method_t avm_pnp_methods[] = {
98 /* Device interface */
99 DEVMETHOD(device_probe, avm_pnp_probe),
100 DEVMETHOD(device_attach, avm_pnp_attach),
104 static driver_t avm_pnp_driver = {
107 sizeof(struct l1_softc)
110 static devclass_t avm_pnp_devclass;
112 DRIVER_MODULE(avm_pnp, isa, avm_pnp_driver, avm_pnp_devclass, 0, 0);
114 /* jump table for multiplex routines */
116 struct i4b_l1mux_func avm_pnp_l1mux_func = {
119 ifpnp_mph_command_req,
121 ifpnp_ph_activate_req,
124 struct l1_softc *ifpnp_scp[IFPNP_MAXUNIT];
126 /*---------------------------------------------------------------------------*
127 * AVM PnP Fritz!Card special registers
128 *---------------------------------------------------------------------------*/
131 * register offsets from i/o base
133 #define CLASS_OFFSET 0x00
134 #define REVISION_OFFSET 0x01
135 #define STAT0_OFFSET 0x02
136 #define STAT1_OFFSET 0x03
137 #define ADDR_REG_OFFSET 0x04
138 /*#define MODREG_OFFSET 0x06
139 #define VERREG_OFFSET 0x07*/
141 /* these 2 are used to select an ISAC register set */
142 #define ISAC_LO_REG_OFFSET 0x04
143 #define ISAC_HI_REG_OFFSET 0x06
145 /* offset higher than this goes to the HI register set */
146 #define MAX_LO_REG_OFFSET 0x2f
148 /* mask for the offset */
149 #define ISAC_REGSET_MASK 0x0f
151 /* the offset from the base to the ISAC registers */
152 #define ISAC_REG_OFFSET 0x10
154 /* the offset from the base to the ISAC FIFO */
155 #define ISAC_FIFO 0x02
157 /* not really the HSCX, but sort of */
158 #define HSCX_FIFO 0x00
159 #define HSCX_STAT 0x04
162 * AVM PnP Status Latch 0 read only bits
164 #define ASL_IRQ_ISAC 0x01 /* ISAC interrupt, active low */
165 #define ASL_IRQ_HSCX 0x02 /* HSX interrupt, active low */
166 #define ASL_IRQ_TIMER 0x04 /* Timer interrupt, active low */
167 #define ASL_IRQ_BCHAN ASL_IRQ_HSCX
168 /* actually active LOW */
169 #define ASL_IRQ_Pending (ASL_IRQ_ISAC | ASL_IRQ_HSCX | ASL_IRQ_TIMER)
172 * AVM Status Latch 0 write only bits
174 #define ASL_RESET_ALL 0x01 /* reset siemens IC's, active 1 */
175 #define ASL_TIMERDISABLE 0x02 /* active high */
176 #define ASL_TIMERRESET 0x04 /* active high */
177 #define ASL_ENABLE_INT 0x08 /* active high */
178 #define ASL_TESTBIT 0x10 /* active high */
181 * AVM Status Latch 1 write only bits
183 #define ASL1_INTSEL 0x0f /* active high */
184 #define ASL1_ENABLE_IOM 0x80 /* active high */
189 #define HSCX_MODE_ITF_FLG 0x01
190 #define HSCX_MODE_TRANS 0x02
191 #define HSCX_MODE_CCR_7 0x04
192 #define HSCX_MODE_CCR_16 0x08
193 #define HSCX_MODE_TESTLOOP 0x80
198 #define HSCX_STAT_RME 0x01
199 #define HSCX_STAT_RDO 0x10
200 #define HSCX_STAT_CRCVFRRAB 0x0E
201 #define HSCX_STAT_CRCVFR 0x06
202 #define HSCX_STAT_RML_MASK 0x3f00
205 * "HSCX" interrupt bits
207 #define HSCX_INT_XPR 0x80
208 #define HSCX_INT_XDU 0x40
209 #define HSCX_INT_RPR 0x20
210 #define HSCX_INT_MASK 0xE0
213 * "HSCX" command bits
215 #define HSCX_CMD_XRS 0x80
216 #define HSCX_CMD_XME 0x01
217 #define HSCX_CMD_RRS 0x20
218 #define HSCX_CMD_XML_MASK 0x3f00
221 * to prevent deactivating the "HSCX" when both channels are active we
222 * define an HSCX_ACTIVE flag which is or'd into the channel's state
223 * flag in avm_pnp_bchannel_setup upon active and cleared upon deactivation.
224 * It is set high to allow room for new flags.
226 #define HSCX_AVMA1PP_ACTIVE 0x1000
228 /*---------------------------------------------------------------------------*
229 * AVM read fifo routines
230 *---------------------------------------------------------------------------*/
233 avm_pnp_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
235 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
236 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
240 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, ISAC_FIFO);
241 bus_space_read_multi_1(btag, bhandle, ISAC_REG_OFFSET, buf, size);
243 case ISIC_WHAT_HSCXA:
244 hscx_read_fifo(0, buf, size, sc);
246 case ISIC_WHAT_HSCXB:
247 hscx_read_fifo(1, buf, size, sc);
253 hscx_read_fifo(int chan, void *buf, size_t len, struct l1_softc *sc)
257 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
258 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
260 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, chan);
261 ip = (u_int8_t *)buf;
265 *ip++ = bus_space_read_1(btag, bhandle, ISAC_REG_OFFSET);
269 /*---------------------------------------------------------------------------*
270 * AVM write fifo routines
271 *---------------------------------------------------------------------------*/
273 avm_pnp_write_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
275 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
276 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
280 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, ISAC_FIFO);
281 bus_space_write_multi_1(btag, bhandle, ISAC_REG_OFFSET, (u_int8_t*)buf, size);
283 case ISIC_WHAT_HSCXA:
284 hscx_write_fifo(0, buf, size, sc);
286 case ISIC_WHAT_HSCXB:
287 hscx_write_fifo(1, buf, size, sc);
293 hscx_write_fifo(int chan, void *buf, size_t len, struct l1_softc *sc)
297 l1_bchan_state_t *Bchan = &sc->sc_chan[chan];
298 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
299 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
301 sc->avma1pp_cmd &= ~HSCX_CMD_XME;
304 if (Bchan->out_mbuf_cur == NULL)
306 if (Bchan->bprot != BPROT_NONE)
307 sc->avma1pp_cmd |= HSCX_CMD_XME;
309 if (len != sc->sc_bfifolen)
310 sc->avma1pp_txl = len;
312 hscx_write_reg(chan, HSCX_STAT, sc, 3);
314 ip = (u_int8_t *)buf;
318 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET, *ip++);
322 /*---------------------------------------------------------------------------*
323 * AVM write register routines
324 *---------------------------------------------------------------------------*/
327 avm_pnp_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
330 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
331 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
335 reg_bank = (offs > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET;
336 /* set the register bank */
337 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, reg_bank);
338 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET + (offs & ISAC_REGSET_MASK), data);
340 case ISIC_WHAT_HSCXA:
341 hscx_write_reg_val(0, offs, data, sc);
343 case ISIC_WHAT_HSCXB:
344 hscx_write_reg_val(1, offs, data, sc);
350 hscx_write_reg(int chan, u_int off, struct l1_softc *sc, u_int which)
352 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
353 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
355 /* point at the correct channel */
356 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, chan);
358 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET + off + 2, sc->avma1pp_prot);
360 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET + off + 1, sc->avma1pp_txl);
362 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET + off, sc->avma1pp_cmd);
366 hscx_write_reg_val(int chan, u_int off, u_int8_t val, struct l1_softc *sc)
368 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
369 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
371 /* point at the correct channel */
372 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, chan);
373 bus_space_write_1(btag, bhandle, ISAC_REG_OFFSET + off, val);
376 /*---------------------------------------------------------------------------*
377 * AVM read register routines
378 *---------------------------------------------------------------------------*/
380 avm_pnp_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
383 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
384 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
388 reg_bank = (offs > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET;
389 /* set the register bank */
390 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, reg_bank);
391 return(bus_space_read_1(btag, bhandle, ISAC_REG_OFFSET +
392 (offs & ISAC_REGSET_MASK)));
393 case ISIC_WHAT_HSCXA:
394 return hscx_read_reg(0, offs, sc);
395 case ISIC_WHAT_HSCXB:
396 return hscx_read_reg(1, offs, sc);
402 hscx_read_reg(int chan, u_int off, struct l1_softc *sc)
404 bus_space_handle_t bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
405 bus_space_tag_t btag = rman_get_bustag(sc->sc_resources.io_base[0]);
407 /* point at the correct channel */
408 bus_space_write_1(btag, bhandle, ADDR_REG_OFFSET, chan);
409 return(bus_space_read_1(btag, bhandle, ISAC_REG_OFFSET + off));
413 static struct ifpnp_ids {
417 { 0x0009cd06, "AVM Fritz!Card PnP" },
421 /*---------------------------------------------------------------------------*
422 * avm_pnp_probe - probe for a card
423 *---------------------------------------------------------------------------*/
428 struct ifpnp_ids *ids; /* pnp id's */
429 char *string = NULL; /* the name */
430 u_int32_t vend_id = isa_get_vendorid(dev); /* vendor id */
432 /* search table of knowd id's */
434 for(ids = ifpnp_ids; ids->vend_id != 0; ids++)
436 if(vend_id == ids->vend_id)
438 string = ids->id_str;
443 if(string) /* set name if we have one */
445 device_set_desc(dev, string); /* set description */
454 /*---------------------------------------------------------------------------*
455 * avm_pnp_attach - attach Fritz!Card PnP
456 *---------------------------------------------------------------------------*/
458 avm_pnp_attach(device_t dev)
466 bus_space_handle_t bhandle;
467 bus_space_tag_t btag;
471 vid = isa_get_vendorid(dev);
472 sc = device_get_softc(dev);
473 unit = device_get_unit(dev);
474 bzero(sc, sizeof(struct l1_softc));
476 /* probably not really required */
477 if(unit > IFPNP_MAXUNIT) {
478 printf("avm_pnp%d: Error, unit > IFPNP_MAXUNIT!\n", unit);
483 ifpnp_scp[unit] = sc;
487 if(!(sc->sc_resources.io_base[0] =
488 bus_alloc_resource(dev, SYS_RES_IOPORT,
489 &sc->sc_resources.io_rid[0],
490 0UL, ~0UL, 1, RF_ACTIVE ) ))
492 printf("avm_pnp_attach: Couldn't get my io_base.\n");
495 if (sc->sc_resources.io_base[0] == NULL) {
496 printf("avm_pnp%d: couldn't map IO port\n", unit);
501 bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
502 btag = rman_get_bustag(sc->sc_resources.io_base[0]);
504 /* will not be used for pnp devices */
505 sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
507 /* get irq, release io_base if we don't get it */
509 if(!(sc->sc_resources.irq =
510 bus_alloc_resource(dev, SYS_RES_IRQ,
511 &sc->sc_resources.irq_rid,
512 0UL, ~0UL, 1, RF_ACTIVE)))
514 printf("avm_pnp%d: Could not get irq.\n",unit);
520 sc->sc_irq = rman_get_start(sc->sc_resources.irq);
521 bus_setup_intr(dev,sc->sc_resources.irq,INTR_TYPE_NET,
522 (void(*)(void*))avm_pnp_intr, sc,&ih);
525 /* end of new-bus stuff */
527 ISAC_BASE = (caddr_t)ISIC_WHAT_ISAC;
529 HSCX_A_BASE = (caddr_t)ISIC_WHAT_HSCXA;
530 HSCX_B_BASE = (caddr_t)ISIC_WHAT_HSCXB;
532 /* setup access routines */
535 sc->readreg = avm_pnp_read_reg;
536 sc->writereg = avm_pnp_write_reg;
538 sc->readfifo = avm_pnp_read_fifo;
539 sc->writefifo = avm_pnp_write_fifo;
541 /* setup card type */
543 sc->sc_cardtyp = CARD_TYPEP_AVM_PNP;
545 /* setup IOM bus type */
547 sc->sc_bustyp = BUS_TYPE_IOM2;
549 /* set up some other miscellaneous things */
551 sc->sc_bfifolen = HSCX_FIFO_LEN;
554 /* the Linux driver does this to clear any pending ISAC interrupts */
556 v = ISAC_READ(I_STAR);
557 v = ISAC_READ(I_MODE);
558 v = ISAC_READ(I_ADF2);
559 v = ISAC_READ(I_ISTA);
560 if (v & ISAC_ISTA_EXI)
562 v = ISAC_READ(I_EXIR);
564 v = ISAC_READ(I_CIRR);
565 ISAC_WRITE(I_MASK, 0xff);
566 /* the Linux driver does this to clear any pending HSCX interrupts */
567 v = hscx_read_reg(0, HSCX_STAT, sc);
568 v = hscx_read_reg(1, HSCX_STAT, sc);
570 bus_space_write_1(btag, bhandle, STAT0_OFFSET, ASL_RESET_ALL|ASL_TIMERDISABLE);
571 DELAY(SEC_DELAY/100); /* 10 ms */
572 bus_space_write_1(btag, bhandle, STAT1_OFFSET, ASL1_ENABLE_IOM|sc->sc_irq);
573 DELAY(SEC_DELAY/100); /* 10 ms */
574 bus_space_write_1(btag, bhandle, STAT0_OFFSET, ASL_TIMERRESET|ASL_ENABLE_INT|ASL_TIMERDISABLE);
575 DELAY(SEC_DELAY/100); /* 10 ms */
577 printf("ifpnp%d: AVM Fritz!Card PnP Class %#x Revision %d \n", unit,
578 bus_space_read_1(btag, bhandle, CLASS_OFFSET),
579 bus_space_read_1(btag, bhandle, REVISION_OFFSET));
581 printf("ifpnp%d: ISAC %s (IOM-%c)\n", unit,
582 "2085 Version A1/A2 or 2086/2186 Version 1.1",
583 sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2');
589 /* init the "HSCX" */
590 avm_pnp_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0);
592 avm_pnp_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0);
594 /* can't use the normal B-Channel stuff */
595 avm_pnp_init_linktab(sc);
597 /* set trace level */
599 sc->sc_trace = TRACE_OFF;
601 sc->sc_state = ISAC_IDLE;
613 sc->sc_freeflag2 = 0;
615 callout_init(&sc->sc_T3_timeout);
616 callout_init(&sc->sc_T4_timeout);
618 /* init higher protocol layers */
620 i4b_l1_mph_status_ind(L0IFPNPUNIT(sc->sc_unit), STI_ATTACH, sc->sc_cardtyp, &avm_pnp_l1mux_func);
628 * this is the real interrupt routine
631 avm_pnp_hscx_intr(int h_chan, u_int stat, u_int cnt, struct l1_softc *sc)
633 l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
636 NDBGL1(L1_H_IRQ, "%#x", stat);
638 if((stat & HSCX_INT_XDU) && (chan->bprot != BPROT_NONE))/* xmit data underrun */
641 NDBGL1(L1_H_XFRERR, "xmit data underrun");
642 /* abort the transmission */
644 sc->avma1pp_cmd |= HSCX_CMD_XRS;
645 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
646 sc->avma1pp_cmd &= ~HSCX_CMD_XRS;
647 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
649 if (chan->out_mbuf_head != NULL) /* don't continue to transmit this buffer */
651 i4b_Bfreembuf(chan->out_mbuf_head);
652 chan->out_mbuf_cur = chan->out_mbuf_head = NULL;
657 * The following is based on examination of the Linux driver.
659 * The logic here is different than with a "real" HSCX; all kinds
660 * of information (interrupt/status bits) are in stat.
661 * HSCX_INT_RPR indicates a receive interrupt
662 * HSCX_STAT_RDO indicates an overrun condition, abort -
663 * otherwise read the bytes ((stat & HSCX_STZT_RML_MASK) >> 8)
664 * HSCX_STAT_RME indicates end-of-frame and apparently any
665 * CRC/framing errors are only reported in this state.
666 * if ((stat & HSCX_STAT_CRCVFRRAB) != HSCX_STAT_CRCVFR)
670 if(stat & HSCX_INT_RPR)
674 /* always have to read the FIFO, so use a scratch buffer */
675 u_char scrbuf[HSCX_FIFO_LEN];
677 if(stat & HSCX_STAT_RDO)
680 NDBGL1(L1_H_XFRERR, "receive data overflow");
685 * check whether we're receiving data for an inactive B-channel
686 * and discard it. This appears to happen for telephony when
687 * both B-channels are active and one is deactivated. Since
688 * it is not really possible to deactivate the channel in that
689 * case (the ASIC seems to deactivate _both_ channels), the
690 * "deactivated" channel keeps receiving data which can lead
691 * to exhaustion of mbufs and a kernel panic.
693 * This is a hack, but it's the only solution I can think of
694 * without having the documentation for the ASIC.
697 if (chan->state == HSCX_IDLE)
699 NDBGL1(L1_H_XFRERR, "toss data from %d", h_chan);
705 if(fifo_data_len == 0)
706 fifo_data_len = sc->sc_bfifolen;
708 /* ALWAYS read data from HSCX fifo */
710 HSCX_RDFIFO(h_chan, scrbuf, fifo_data_len);
711 chan->rxcount += fifo_data_len;
713 /* all error conditions checked, now decide and take action */
717 if(chan->in_mbuf == NULL)
719 if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
720 panic("L1 avm_pnp_hscx_intr: RME, cannot allocate mbuf!\n");
721 chan->in_cbptr = chan->in_mbuf->m_data;
725 if((chan->in_len + fifo_data_len) <= BCH_MAX_DATALEN)
727 /* OK to copy the data */
728 bcopy(scrbuf, chan->in_cbptr, fifo_data_len);
729 chan->in_cbptr += fifo_data_len;
730 chan->in_len += fifo_data_len;
732 /* setup mbuf data length */
734 chan->in_mbuf->m_len = chan->in_len;
735 chan->in_mbuf->m_pkthdr.len = chan->in_len;
737 if(sc->sc_trace & TRACE_B_RX)
740 hdr.unit = L0IFPNPUNIT(sc->sc_unit);
741 hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
743 hdr.count = ++sc->sc_trace_bcount;
745 i4b_l1_trace_ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data);
748 if (stat & HSCX_STAT_RME)
750 if((stat & HSCX_STAT_CRCVFRRAB) == HSCX_STAT_CRCVFR)
752 (*chan->isic_drvr_linktab->bch_rx_data_ready)(chan->isic_drvr_linktab->unit);
755 /* mark buffer ptr as unused */
757 chan->in_mbuf = NULL;
758 chan->in_cbptr = NULL;
764 NDBGL1(L1_H_XFRERR, "CRC/RAB");
765 if (chan->in_mbuf != NULL)
767 i4b_Bfreembuf(chan->in_mbuf);
768 chan->in_mbuf = NULL;
769 chan->in_cbptr = NULL;
774 } /* END enough space in mbuf */
777 if(chan->bprot == BPROT_NONE)
779 /* setup mbuf data length */
781 chan->in_mbuf->m_len = chan->in_len;
782 chan->in_mbuf->m_pkthdr.len = chan->in_len;
784 if(sc->sc_trace & TRACE_B_RX)
787 hdr.unit = L0IFPNPUNIT(sc->sc_unit);
788 hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
790 hdr.count = ++sc->sc_trace_bcount;
792 i4b_l1_trace_ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data);
795 if(!(i4b_l1_bchan_tel_silence(chan->in_mbuf->m_data, chan->in_mbuf->m_len)))
798 /* move rx'd data to rx queue */
799 #if defined (__FreeBSD__) && __FreeBSD__ > 4
800 (void) IF_HANDOFF(&chan->rx_queue, chan->in_mbuf, NULL);
802 if(!(IF_QFULL(&chan->rx_queue)))
804 IF_ENQUEUE(&chan->rx_queue, chan->in_mbuf);
808 i4b_Bfreembuf(chan->in_mbuf);
811 /* signal upper layer that data are available */
812 (*chan->isic_drvr_linktab->bch_rx_data_ready)(chan->isic_drvr_linktab->unit);
814 /* alloc new buffer */
816 if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
817 panic("L1 avm_pnp_hscx_intr: RPF, cannot allocate new mbuf!\n");
819 /* setup new data ptr */
821 chan->in_cbptr = chan->in_mbuf->m_data;
823 /* OK to copy the data */
824 bcopy(scrbuf, chan->in_cbptr, fifo_data_len);
826 chan->in_cbptr += fifo_data_len;
827 chan->in_len = fifo_data_len;
829 chan->rxcount += fifo_data_len;
833 NDBGL1(L1_H_XFRERR, "RAWHDLC rx buffer overflow in RPF, in_len=%d", chan->in_len);
834 chan->in_cbptr = chan->in_mbuf->m_data;
838 } /* if(error == 0) */
841 /* land here for RDO */
842 if (chan->in_mbuf != NULL)
844 i4b_Bfreembuf(chan->in_mbuf);
845 chan->in_mbuf = NULL;
846 chan->in_cbptr = NULL;
850 sc->avma1pp_cmd |= HSCX_CMD_RRS;
851 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
852 sc->avma1pp_cmd &= ~HSCX_CMD_RRS;
853 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
858 /* transmit fifo empty, new data can be written to fifo */
860 if(stat & HSCX_INT_XPR)
863 * for a description what is going on here, please have
864 * a look at isic_bchannel_start() in i4b_bchan.c !
867 NDBGL1(L1_H_IRQ, "unit %d, chan %d - XPR, Tx Fifo Empty!", sc->sc_unit, h_chan);
869 if(chan->out_mbuf_cur == NULL) /* last frame is transmitted */
871 IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head);
873 if(chan->out_mbuf_head == NULL)
875 chan->state &= ~HSCX_TX_ACTIVE;
876 (*chan->isic_drvr_linktab->bch_tx_queue_empty)(chan->isic_drvr_linktab->unit);
880 chan->state |= HSCX_TX_ACTIVE;
881 chan->out_mbuf_cur = chan->out_mbuf_head;
882 chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data;
883 chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len;
885 if(sc->sc_trace & TRACE_B_TX)
888 hdr.unit = L0IFPNPUNIT(sc->sc_unit);
889 hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
891 hdr.count = ++sc->sc_trace_bcount;
893 i4b_l1_trace_ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data);
896 if(chan->bprot == BPROT_NONE)
898 if(!(i4b_l1_bchan_tel_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len)))
908 avm_pnp_hscx_fifo(chan, sc);
911 /* call timeout handling routine */
913 if(activity == ACT_RX || activity == ACT_TX)
914 (*chan->isic_drvr_linktab->bch_activity)(chan->isic_drvr_linktab->unit, activity);
918 * this is the main routine which checks each channel and then calls
919 * the real interrupt routine as appropriate
922 avm_pnp_hscx_int_handler(struct l1_softc *sc)
927 stat = hscx_read_reg(0, HSCX_STAT, sc);
928 if (stat & HSCX_INT_RPR)
929 cnt = hscx_read_reg(0, HSCX_STAT+1, sc);
930 if (stat & HSCX_INT_MASK)
931 avm_pnp_hscx_intr(0, stat, cnt, sc);
934 stat = hscx_read_reg(1, HSCX_STAT, sc);
935 if (stat & HSCX_INT_RPR)
936 cnt = hscx_read_reg(1, HSCX_STAT+1, sc);
937 if (stat & HSCX_INT_MASK)
938 avm_pnp_hscx_intr(1, stat, cnt, sc);
942 avm_pnp_intr(void *xsc)
946 bus_space_handle_t bhandle;
947 bus_space_tag_t btag;
950 bhandle = rman_get_bushandle(sc->sc_resources.io_base[0]);
951 btag = rman_get_bustag(sc->sc_resources.io_base[0]);
953 stat = bus_space_read_1(btag, bhandle, STAT0_OFFSET);
954 NDBGL1(L1_H_IRQ, "stat %x", stat);
955 /* was there an interrupt from this card ? */
956 if ((stat & ASL_IRQ_Pending) == ASL_IRQ_Pending)
958 /* interrupts are low active */
959 if (!(stat & ASL_IRQ_TIMER))
960 NDBGL1(L1_H_IRQ, "timer interrupt ???");
961 if (!(stat & ASL_IRQ_HSCX))
963 NDBGL1(L1_H_IRQ, "HSCX");
964 avm_pnp_hscx_int_handler(sc);
966 if (!(stat & ASL_IRQ_ISAC))
968 NDBGL1(L1_H_IRQ, "ISAC");
974 avm_pnp_hscx_init(struct l1_softc *sc, int h_chan, int activate)
976 l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
978 NDBGL1(L1_BCHAN, "unit=%d, channel=%d, %s",
979 sc->sc_unit, h_chan, activate ? "activate" : "deactivate");
983 /* only deactivate if both channels are idle */
984 if (sc->sc_chan[HSCX_CH_A].state != HSCX_IDLE ||
985 sc->sc_chan[HSCX_CH_B].state != HSCX_IDLE)
989 sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS;
990 sc->avma1pp_prot = HSCX_MODE_TRANS;
991 hscx_write_reg(h_chan, HSCX_STAT, sc, 5);
994 if(chan->bprot == BPROT_RHDLC)
996 NDBGL1(L1_BCHAN, "BPROT_RHDLC");
998 /* HDLC Frames, transparent mode 0 */
999 sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS;
1000 sc->avma1pp_prot = HSCX_MODE_ITF_FLG;
1001 hscx_write_reg(h_chan, HSCX_STAT, sc, 5);
1002 sc->avma1pp_cmd = HSCX_CMD_XRS;
1003 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
1004 sc->avma1pp_cmd = 0;
1008 NDBGL1(L1_BCHAN, "BPROT_NONE??");
1010 /* Raw Telephony, extended transparent mode 1 */
1011 sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS;
1012 sc->avma1pp_prot = HSCX_MODE_TRANS;
1013 hscx_write_reg(h_chan, HSCX_STAT, sc, 5);
1014 sc->avma1pp_cmd = HSCX_CMD_XRS;
1015 hscx_write_reg(h_chan, HSCX_STAT, sc, 1);
1016 sc->avma1pp_cmd = 0;
1021 avm_pnp_bchannel_setup(int unit, int h_chan, int bprot, int activate)
1023 struct l1_softc *sc = ifpnp_scp[unit];
1024 l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
1031 chan->state = HSCX_IDLE;
1032 avm_pnp_hscx_init(sc, h_chan, activate);
1035 NDBGL1(L1_BCHAN, "unit=%d, channel=%d, %s",
1036 sc->sc_unit, h_chan, activate ? "activate" : "deactivate");
1040 chan->unit = sc->sc_unit; /* unit number */
1041 chan->channel = h_chan; /* B channel */
1042 chan->bprot = bprot; /* B channel protocol */
1043 chan->state = HSCX_IDLE; /* B channel state */
1047 chan->rx_queue.ifq_maxlen = IFQ_MAXLEN;
1049 #if defined (__FreeBSD__) && __FreeBSD__ > 4
1050 mtx_init(&chan->rx_queue.ifq_mtx, "i4b_avm_pnp_rx", MTX_DEF);
1053 i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */
1055 chan->rxcount = 0; /* reset rx counter */
1057 i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */
1059 chan->in_mbuf = NULL; /* reset mbuf ptr */
1060 chan->in_cbptr = NULL; /* reset mbuf curr ptr */
1061 chan->in_len = 0; /* reset mbuf data len */
1063 /* transmitter part */
1065 chan->tx_queue.ifq_maxlen = IFQ_MAXLEN;
1067 #if defined (__FreeBSD__) && __FreeBSD__ > 4
1068 mtx_init(&chan->tx_queue.ifq_mtx, "i4b_avm_pnp_tx", MTX_DEF);
1070 i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */
1072 chan->txcount = 0; /* reset tx counter */
1074 i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */
1076 chan->out_mbuf_head = NULL; /* reset head mbuf ptr */
1077 chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */
1078 chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */
1079 chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */
1084 avm_pnp_hscx_init(sc, h_chan, activate);
1085 chan->state |= HSCX_AVMA1PP_ACTIVE;
1092 avm_pnp_bchannel_start(int unit, int h_chan)
1094 struct l1_softc *sc = ifpnp_scp[unit];
1095 l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
1099 s = SPLI4B(); /* enter critical section */
1100 if(chan->state & HSCX_TX_ACTIVE) /* already running ? */
1103 return; /* yes, leave */
1106 /* get next mbuf from queue */
1108 IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head);
1110 if(chan->out_mbuf_head == NULL) /* queue empty ? */
1112 splx(s); /* leave critical section */
1113 return; /* yes, exit */
1116 /* init current mbuf values */
1118 chan->out_mbuf_cur = chan->out_mbuf_head;
1119 chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len;
1120 chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data;
1122 /* activity indicator for timeout handling */
1124 if(chan->bprot == BPROT_NONE)
1126 if(!(i4b_l1_bchan_tel_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len)))
1134 chan->state |= HSCX_TX_ACTIVE; /* we start transmitting */
1136 if(sc->sc_trace & TRACE_B_TX) /* if trace, send mbuf to trace dev */
1138 i4b_trace_hdr_t hdr;
1139 hdr.unit = L0IFPNPUNIT(sc->sc_unit);
1140 hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
1142 hdr.count = ++sc->sc_trace_bcount;
1143 MICROTIME(hdr.time);
1144 i4b_l1_trace_ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data);
1147 avm_pnp_hscx_fifo(chan, sc);
1149 /* call timeout handling routine */
1151 if(activity == ACT_RX || activity == ACT_TX)
1152 (*chan->isic_drvr_linktab->bch_activity)(chan->isic_drvr_linktab->unit, activity);
1157 /*---------------------------------------------------------------------------*
1158 * return the address of isic drivers linktab
1159 *---------------------------------------------------------------------------*/
1160 static isdn_link_t *
1161 avm_pnp_ret_linktab(int unit, int channel)
1163 struct l1_softc *sc = ifpnp_scp[unit];
1164 l1_bchan_state_t *chan = &sc->sc_chan[channel];
1166 return(&chan->isic_isdn_linktab);
1169 /*---------------------------------------------------------------------------*
1170 * set the driver linktab in the b channel softc
1171 *---------------------------------------------------------------------------*/
1173 avm_pnp_set_linktab(int unit, int channel, drvr_link_t *dlt)
1175 struct l1_softc *sc = ifpnp_scp[unit];
1176 l1_bchan_state_t *chan = &sc->sc_chan[channel];
1178 chan->isic_drvr_linktab = dlt;
1182 /*---------------------------------------------------------------------------*
1183 * initialize our local linktab
1184 *---------------------------------------------------------------------------*/
1186 avm_pnp_init_linktab(struct l1_softc *sc)
1188 l1_bchan_state_t *chan = &sc->sc_chan[HSCX_CH_A];
1189 isdn_link_t *lt = &chan->isic_isdn_linktab;
1191 /* make sure the hardware driver is known to layer 4 */
1192 /* avoid overwriting if already set */
1193 if (ctrl_types[CTRL_PASSIVE].set_linktab == NULL)
1195 ctrl_types[CTRL_PASSIVE].set_linktab = avm_pnp_set_linktab;
1196 ctrl_types[CTRL_PASSIVE].get_linktab = avm_pnp_ret_linktab;
1200 lt->unit = sc->sc_unit;
1201 lt->channel = HSCX_CH_A;
1202 lt->bch_config = avm_pnp_bchannel_setup;
1203 lt->bch_tx_start = avm_pnp_bchannel_start;
1204 lt->bch_stat = avm_pnp_bchannel_stat;
1205 lt->tx_queue = &chan->tx_queue;
1207 /* used by non-HDLC data transfers, i.e. telephony drivers */
1208 lt->rx_queue = &chan->rx_queue;
1210 /* used by HDLC data transfers, i.e. ipr and isp drivers */
1211 lt->rx_mbuf = &chan->in_mbuf;
1213 chan = &sc->sc_chan[HSCX_CH_B];
1214 lt = &chan->isic_isdn_linktab;
1216 lt->unit = sc->sc_unit;
1217 lt->channel = HSCX_CH_B;
1218 lt->bch_config = avm_pnp_bchannel_setup;
1219 lt->bch_tx_start = avm_pnp_bchannel_start;
1220 lt->bch_stat = avm_pnp_bchannel_stat;
1221 lt->tx_queue = &chan->tx_queue;
1223 /* used by non-HDLC data transfers, i.e. telephony drivers */
1224 lt->rx_queue = &chan->rx_queue;
1226 /* used by HDLC data transfers, i.e. ipr and isp drivers */
1227 lt->rx_mbuf = &chan->in_mbuf;
1231 * use this instead of isic_bchannel_stat in i4b_bchan.c because it's static
1234 avm_pnp_bchannel_stat(int unit, int h_chan, bchan_statistics_t *bsp)
1236 struct l1_softc *sc = ifpnp_scp[unit];
1237 l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
1242 bsp->outbytes = chan->txcount;
1243 bsp->inbytes = chan->rxcount;
1251 /*---------------------------------------------------------------------------*
1252 * fill HSCX fifo with data from the current mbuf
1253 * Put this here until it can go into i4b_hscx.c
1254 *---------------------------------------------------------------------------*/
1256 avm_pnp_hscx_fifo(l1_bchan_state_t *chan, struct l1_softc *sc)
1262 /* using a scratch buffer simplifies writing to the FIFO */
1263 u_char scrbuf[HSCX_FIFO_LEN];
1268 * fill the HSCX tx fifo with data from the current mbuf. if
1269 * current mbuf holds less data than HSCX fifo length, try to
1270 * get the next mbuf from (a possible) mbuf chain. if there is
1271 * not enough data in a single mbuf or in a chain, then this
1272 * is the last mbuf and we tell the HSCX that it has to send
1273 * CRC and closing flag
1276 while(chan->out_mbuf_cur && len != sc->sc_bfifolen)
1278 nextlen = min(chan->out_mbuf_cur_len, sc->sc_bfifolen - len);
1281 printf("i:mh=%p, mc=%p, mcp=%p, mcl=%d l=%d nl=%d # ",
1282 chan->out_mbuf_head,
1284 chan->out_mbuf_cur_ptr,
1285 chan->out_mbuf_cur_len,
1290 cmd |= HSCX_CMDR_XTF;
1291 /* collect the data in the scratch buffer */
1292 for (i = 0; i < nextlen; i++)
1293 scrbuf[i + len] = chan->out_mbuf_cur_ptr[i];
1296 chan->txcount += nextlen;
1298 chan->out_mbuf_cur_ptr += nextlen;
1299 chan->out_mbuf_cur_len -= nextlen;
1301 if(chan->out_mbuf_cur_len == 0)
1303 if((chan->out_mbuf_cur = chan->out_mbuf_cur->m_next) != NULL)
1305 chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data;
1306 chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len;
1308 if(sc->sc_trace & TRACE_B_TX)
1310 i4b_trace_hdr_t hdr;
1311 hdr.unit = L0IFPNPUNIT(sc->sc_unit);
1312 hdr.type = (chan->channel == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
1314 hdr.count = ++sc->sc_trace_bcount;
1315 MICROTIME(hdr.time);
1316 i4b_l1_trace_ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data);
1321 if (chan->bprot != BPROT_NONE)
1322 cmd |= HSCX_CMDR_XME;
1323 i4b_Bfreembuf(chan->out_mbuf_head);
1324 chan->out_mbuf_head = NULL;
1328 /* write what we have from the scratch buf to the HSCX fifo */
1330 HSCX_WRFIFO(chan->channel, scrbuf, len);
1334 /*---------------------------------------------------------------------------*
1335 * ifpnp - ISAC interrupt routine
1336 *---------------------------------------------------------------------------*/
1338 ifpnp_isac_intr(struct l1_softc *sc)
1340 u_char isac_irq_stat;
1344 /* get isac irq status */
1345 isac_irq_stat = ISAC_READ(I_ISTA);
1348 ifpnp_isac_irq(sc, isac_irq_stat); /* isac handler */
1353 ISAC_WRITE(I_MASK, 0xff);
1357 ISAC_WRITE(I_MASK, ISAC_IMASK);
1360 /*---------------------------------------------------------------------------*
1361 * ifpnp_recover - try to recover from irq lockup
1362 *---------------------------------------------------------------------------*/
1364 ifpnp_recover(struct l1_softc *sc)
1368 /* get isac irq status */
1370 byte = ISAC_READ(I_ISTA);
1372 NDBGL1(L1_ERROR, " ISAC: ISTA = 0x%x", byte);
1374 if(byte & ISAC_ISTA_EXI)
1375 NDBGL1(L1_ERROR, " ISAC: EXIR = 0x%x", (u_char)ISAC_READ(I_EXIR));
1377 if(byte & ISAC_ISTA_CISQ)
1379 byte = ISAC_READ(I_CIRR);
1381 NDBGL1(L1_ERROR, " ISAC: CISQ = 0x%x", byte);
1383 if(byte & ISAC_CIRR_SQC)
1384 NDBGL1(L1_ERROR, " ISAC: SQRR = 0x%x", (u_char)ISAC_READ(I_SQRR));
1387 NDBGL1(L1_ERROR, " ISAC: IMASK = 0x%x", ISAC_IMASK);
1389 ISAC_WRITE(I_MASK, 0xff);
1391 ISAC_WRITE(I_MASK, ISAC_IMASK);
1394 #endif /* NIFPNP > 0 */