1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
3 # On the handling of kernel options
5 # All kernel options should be listed in LINT, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT should compile as much code
8 # as possible. Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test. If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options". Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files. Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
33 # Adaptec Array Controller driver options
34 AAC_DEBUG opt_aac.h # Debugging levels:
35 # 0 - quiet, only emit warnings
36 # 1 - noisy, emit major function
37 # points and things done
38 # 2 - noisier, emit trace items
40 # 3 - even more noisy, more function
44 # Adaptec aic7xxx SCSI controller options
45 AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory
48 AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable
49 # targetmode operations.
51 AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our
54 AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code.
56 AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options.
57 # See sys/dev/aic7xxx/aic7xxx.h
59 AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug
60 # output. Adds ~15k to driver.
62 # Adaptec aic79xx SCSI controller options
63 AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code.
65 AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options.
66 # See sys/dev/aic7xxx/aic79xx.h
68 AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable
69 # targetmode operations.
71 AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug
72 # output. Adds ~15k to driver.
74 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
78 #options for ACPI support
80 ACPI_NO_SEMAPHORES opt_acpi.h
81 ACPI_ENABLE_PCI opt_acpi.h
83 # Miscellaneous options.
84 COMPAT_DF12 opt_compatdf12.h
85 COMPAT_43 opt_compat.h
86 COMPAT_SUNOS opt_compat.h
87 COMPILING_LINT opt_lint.h
90 DDB_UNATTENDED opt_ddb.h
91 GDB_REMOTE_CHAT opt_ddb.h
99 MFI_DECODE_LOG opt_mfi.h
101 NSWBUF_MIN opt_swap.h
104 SUIDDIR opt_suiddir.h
105 SYSVMSG opt_sysvipc.h
106 SYSVSEM opt_sysvipc.h
107 SYSVSHM opt_sysvipc.h
110 SHMMAXPGS opt_sysvipc.h
130 DIRECTIO opt_directio.h
132 # POSIX kernel options
134 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
135 _KPOSIX_VERSION opt_posix.h
137 # Do we want the config file compiled into the kernel?
138 INCLUDE_CONFIG_FILE opt_config.h
140 # Options for static file systems. These should only be used at config
141 # time, since the corresponding lkms cannot work if there are any static
142 # dependencies. Unusability is enforced by hiding the defines for the
143 # options in a never-included header.
147 MSDOSFS opt_dontuse.h
155 # These static filesystems has one slightly bogus static dependency in
156 # sys/platform/.../i386/autoconf.c. If any of these filesystems are
157 # statically compiled into the kernel, code for mounting them as root
158 # filesystems will be enabled - but look below. Boot-code is purposely
159 # unavailable for the LKM-based versions.
168 # If you are following the conditions in the copyright,
169 # you can enable soft-updates which will speed up a lot of things
170 # and make the system safer from crashes at the same time.
171 # otherwise a STUB module will be compiled in.
172 SOFTUPDATES opt_ffs.h
174 # Enable fast hash lookups for large directories on UFS-based filesystems.
175 UFS_DIRHASH opt_ufs.h
177 # The above static dependencies are planned removed, with a
178 # <filesystem>_ROOT option to control if it usable as root. This list
179 # allows these options to be present in config files already (though
180 # they won't make any difference yet).
182 NFS_ROOT opt_nfsroot.h
184 # The union static file system has bogus static dependencies, so it isn't
188 # Options used only in subr_param.c.
192 NMBCLUSTERS opt_param.h
194 VM_BCACHE_SIZE_MAX opt_param.h
195 VM_SWZONE_SIZE_MAX opt_param.h
201 # Generic SCSI options.
202 CAM_MAX_HIGHPOWER opt_cam.h
204 CAM_DEBUG_DELAY opt_cam.h
205 CAM_DEBUG_BUS opt_cam.h
206 CAM_DEBUG_TARGET opt_cam.h
207 CAM_DEBUG_LUN opt_cam.h
208 CAM_DEBUG_FLAGS opt_cam.h
209 SCSI_DELAY opt_scsi.h
210 SCSI_NO_SENSE_STRINGS opt_scsi.h
211 SCSI_NO_OP_STRINGS opt_scsi.h
214 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
216 # Options used only in cam/scsi/scsi_cd.c
217 CHANGER_MIN_BUSY_SECONDS opt_cd.h
218 CHANGER_MAX_BUSY_SECONDS opt_cd.h
220 # Options used only in cam/scsi/scsi_sa.c.
221 SA_IO_TIMEOUT opt_sa.h
222 SA_SPACE_TIMEOUT opt_sa.h
223 SA_REWIND_TIMEOUT opt_sa.h
224 SA_ERASE_TIMEOUT opt_sa.h
225 SA_1FM_AT_EOD opt_sa.h
227 # Options used only in cam/scsi/scsi_pt.c
228 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
230 # Options used only in cam/scsi/scsi_ses.c
231 SES_ENABLE_PASSTHROUGH opt_ses.h
233 # Options used in dev/sym/ (Symbios SCSI driver).
234 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
235 # Allows the ncr to take precedence
236 # 1 (1<<0) -> 810a, 860
237 # 2 (1<<1) -> 825a, 875, 885, 895
238 # 4 (1<<2) -> 895a, 896, 1510d
239 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
240 # disabled:0 (default), enabled:1
241 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
242 # disabled:0, enabled:1 (default)
243 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
244 # default:8, range:[1..64]
246 # Options used only in pci/ncr.c
247 SCSI_NCR_DEBUG opt_ncr.h
248 SCSI_NCR_MAX_SYNC opt_ncr.h
249 SCSI_NCR_MAX_WIDE opt_ncr.h
250 SCSI_NCR_MYADDR opt_ncr.h
252 # Options used only in pci/isp_pci.c
253 ISP_TARGET_MODE opt_isp.h
255 # Options used in the 'ata' ATA/ATAPI driver
256 ATA_STATIC_ID opt_ata.h
266 ALTQ_FAIRQ opt_altq.h
267 ALTQ_NOPCC opt_altq.h
268 ALTQ_DEBUG opt_altq.h
273 BOOTP_COMPAT opt_bootp.h
274 BOOTP_NFSROOT opt_bootp.h
275 BOOTP_NFSV3 opt_bootp.h
276 BOOTP_WIRED_TO opt_bootp.h
282 MROUTING opt_mrouting.h
287 IPSEC_ESP opt_ipsec.h
288 IPSEC_DEBUG opt_ipsec.h
289 IPSEC_FILTERGIF opt_ipsec.h
290 FAST_IPSEC opt_ipsec.h
293 DUMMYNET_DEBUG opt_ipdn.h
294 IPFILTER opt_ipfilter.h
295 IPFILTER_LOG opt_ipfilter.h
296 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
297 IPFIREWALL opt_ipfw.h
298 IPFIREWALL_DEBUG opt_ipfw.h
299 IPFIREWALL_VERBOSE opt_ipfw.h
300 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
301 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
302 IPFIREWALL_FORWARD opt_ipfw.h
303 IPV6FIREWALL opt_ip6fw.h
304 IPV6FIREWALL_VERBOSE opt_ip6fw.h
305 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
306 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
316 PPP_BSDCOMP opt_ppp.h
317 PPP_DEFLATE opt_ppp.h
319 SLIP_IFF_OPTS opt_slip.h
321 TCP_SIGNATURE opt_inet.h
322 TCP_DROP_SYNFIN opt_tcp_input.h
325 MBUF_STRESS_TEST opt_mbuf_stress_test.h
327 # (New netgraph, port still in progress)
329 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
330 # Each netgraph node type can be either be compiled into the kernel
331 # or loaded dynamically. To get the former, include the corresponding
332 # option below. Each type has its own man page, e.g. ng_async(4).
334 NETGRAPH7_DEBUG opt_netgraph.h
335 NETGRAPH7_ASYNC opt_netgraph.h
336 NETGRAPH7_ATMLLC opt_netgraph.h
337 NETGRAPH7_ATM_ATMPIF opt_netgraph.h
338 NETGRAPH7_BLUETOOTH opt_netgraph.h
339 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h
340 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h
341 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h
342 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h
343 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h
344 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h
345 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h
346 NETGRAPH7_BPF opt_netgraph.h
347 NETGRAPH7_BRIDGE opt_netgraph.h
348 NETGRAPH7_CAR opt_netgraph.h
349 NETGRAPH7_CISCO opt_netgraph.h
350 NETGRAPH7_DEFLATE opt_netgraph.h
351 NETGRAPH7_DEVICE opt_netgraph.h
352 NETGRAPH7_ECHO opt_netgraph.h
353 NETGRAPH7_EIFACE opt_netgraph.h
354 NETGRAPH7_ETHER opt_netgraph.h
355 NETGRAPH7_FEC opt_netgraph.h
356 NETGRAPH7_FRAME_RELAY opt_netgraph.h
357 NETGRAPH7_GIF opt_netgraph.h
358 NETGRAPH7_GIF_DEMUX opt_netgraph.h
359 NETGRAPH7_HOLE opt_netgraph.h
360 NETGRAPH7_IFACE opt_netgraph.h
361 NETGRAPH7_IP_INPUT opt_netgraph.h
362 NETGRAPH7_IPFW opt_netgraph.h
363 NETGRAPH7_KSOCKET opt_netgraph.h
364 NETGRAPH7_L2TP opt_netgraph.h
365 NETGRAPH7_LMI opt_netgraph.h
366 # MPPC compression requires proprietary files (not included)
367 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h
368 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h
369 NETGRAPH7_NAT opt_netgraph.h
370 NETGRAPH7_NETFLOW opt_netgraph.h
371 NETGRAPH7_ONE2MANY opt_netgraph.h
372 NETGRAPH7_PPP opt_netgraph.h
373 NETGRAPH7_PPPOE opt_netgraph.h
374 NETGRAPH7_PPTPGRE opt_netgraph.h
375 NETGRAPH7_PRED1 opt_netgraph.h
376 NETGRAPH7_RFC1490 opt_netgraph.h
377 NETGRAPH7_SOCKET opt_netgraph.h
378 NETGRAPH7_SPLIT opt_netgraph.h
379 NETGRAPH7_SPPP opt_netgraph.h
380 NETGRAPH7_TAG opt_netgraph.h
381 NETGRAPH7_TCPMSS opt_netgraph.h
382 NETGRAPH7_TEE opt_netgraph.h
383 NETGRAPH7_TTY opt_netgraph.h
384 NETGRAPH7_UI opt_netgraph.h
385 NETGRAPH7_VJC opt_netgraph.h
388 NGATM7_ATM opt_netgraph.h
389 NGATM7_ATMBASE opt_netgraph.h
390 NGATM7_SSCOP opt_netgraph.h
391 NGATM7_SSCFU opt_netgraph.h
392 NGATM7_UNI opt_netgraph.h
393 NGATM7_CCATM opt_netgraph.h
395 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
396 # Each netgraph node type can be either be compiled into the kernel
397 # or loaded dynamically. To get the former, include the corresponding
398 # option below. Each type has its own man page, e.g. ng_async(8).
400 NETGRAPH_ASYNC opt_netgraph.h
401 NETGRAPH_BPF opt_netgraph.h
402 NETGRAPH_BRIDGE opt_netgraph.h
403 NETGRAPH_CISCO opt_netgraph.h
404 NETGRAPH_ECHO opt_netgraph.h
405 NETGRAPH_EIFACE opt_netgraph.h
406 NETGRAPH_ETHER opt_netgraph.h
407 NETGRAPH_FRAME_RELAY opt_netgraph.h
408 NETGRAPH_HOLE opt_netgraph.h
409 NETGRAPH_IFACE opt_netgraph.h
410 NETGRAPH_KSOCKET opt_netgraph.h
411 NETGRAPH_LMI opt_netgraph.h
412 NETGRAPH_L2TP opt_netgraph.h
413 # MPPC compression requires proprietary files (not included)
414 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
415 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
416 NETGRAPH_ONE2MANY opt_netgraph.h
417 NETGRAPH_PPP opt_netgraph.h
418 NETGRAPH_PPPOE opt_netgraph.h
419 NETGRAPH_PPTPGRE opt_netgraph.h
420 NETGRAPH_RFC1490 opt_netgraph.h
421 NETGRAPH_SOCKET opt_netgraph.h
422 NETGRAPH_TEE opt_netgraph.h
423 NETGRAPH_TTY opt_netgraph.h
424 NETGRAPH_UI opt_netgraph.h
425 NETGRAPH_VJC opt_netgraph.h
438 # XXX Conflict: # of devices vs network protocol (Native ATM).
439 # This makes "atm.h" unusable.
442 # DPT driver debug flags
443 DPT_MEASURE_PERFORMANCE opt_dpt.h
444 DPT_HANDLE_TIMEOUTS opt_dpt.h
445 DPT_TIMEOUT_FACTOR opt_dpt.h
446 DPT_LOST_IRQ opt_dpt.h
447 DPT_RESET_HBA opt_dpt.h
449 # Misc debug flags. Most of these should probably be replaced with
450 # 'DEBUG', and then let people recompile just the interesting modules
451 # with 'make CC="cc -DDEBUG"'.
452 CLUSTERDEBUG opt_debug_cluster.h
453 DEBUG_1284 opt_ppb_1284.h
456 PLIP_DEBUG opt_plip.h
457 LOCKF_DEBUG opt_debug_lockf.h
458 LOUTB opt_debug_outb.h
459 NPX_DEBUG opt_debug_npx.h
460 NETATALKDEBUG opt_atalk.h
461 SI_DEBUG opt_debug_si.h
465 FB_INSTALL_CDEV opt_fb.h
467 # ppbus related options
468 PERIPH_1284 opt_ppb_1284.h
469 DONTPROBE_1284 opt_ppb_1284.h
471 # smbus related options
472 ENABLE_ALART opt_intpm.h
474 # These cause changes all over the kernel
475 BLKDEV_IOSIZE opt_global.h
477 DEBUG_LOCKS opt_global.h
478 DEBUG_CRIT_SECTIONS opt_global.h
479 DIAGNOSTIC opt_global.h
480 INVARIANTS opt_global.h
481 SIMPLELOCK_DEBUG opt_global.h
482 VFS_BIO_DEBUG opt_global.h
483 DEBUG_INTERRUPTS opt_global.h
484 SOCKBUF_DEBUG opt_global.h
485 PANIC_DEBUG opt_global.h
486 MBUF_DEBUG opt_global.h
488 # Sample system/interrupt PC
489 DEBUG_PCTRACK opt_pctrack.h
491 # These are VM related options
493 PQ_CACHESIZE opt_vmpage.h
495 # Standard SMP options
501 # Size of the kernel message buffer
502 MSGBUF_SIZE opt_msgbuf.h
504 # PCI related options
508 NFS_MINATTRTIMO opt_nfs.h
509 NFS_MAXATTRTIMO opt_nfs.h
510 NFS_MINDIRATTRTIMO opt_nfs.h
511 NFS_MAXDIRATTRTIMO opt_nfs.h
512 NFS_GATHERDELAY opt_nfs.h
513 NFS_UIDHASHSIZ opt_nfs.h
514 NFS_WDELAYHASHSIZ opt_nfs.h
515 NFS_MUIDHASHSIZ opt_nfs.h
516 NFS_NOSERVER opt_nfs.h
520 MSDOSFS_DEBUG opt_msdosfs.h
522 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
523 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
524 BROOKTREE_ALLOC_PAGES opt_bktr.h
525 BKTR_OVERRIDE_CARD opt_bktr.h
526 BKTR_OVERRIDE_TUNER opt_bktr.h
527 BKTR_OVERRIDE_DBX opt_bktr.h
528 BKTR_OVERRIDE_MSP opt_bktr.h
529 BKTR_SYSTEM_DEFAULT opt_bktr.h
530 BKTR_ALLOC_PAGES opt_bktr.h
531 BKTR_USE_PLL opt_bktr.h
532 BKTR_GPIO_ACCESS opt_bktr.h
533 BKTR_NO_MSP_RESET opt_bktr.h
534 BKTR_430_FX_MODE opt_bktr.h
535 BKTR_SIS_VIA_MODE opt_bktr.h
536 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
538 # meteor opt_meteor.h
539 METEOR_ALLOC_PAGES opt_meteor.h
540 METEOR_TEST_VIDEO opt_meteor.h
541 METEOR_SYSTEM_DEFAULT opt_meteor.h
542 METEOR_DEALLOC_PAGES opt_meteor.h
543 METEOR_DEALLOC_ABOVE opt_meteor.h
545 # Various mi ISA bus flags
546 COMPAT_OLDISA opt_compat_oldisa.h
548 COM_MULTIPORT opt_sio.h
549 BREAK_TO_DEBUGGER opt_comconsole.h
550 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
552 # options for bus/device framework
555 # options for USB support
560 VINUMDEBUG opt_vinum.h
562 # Embedded system options
563 UKBD_DFLT_KEYMAP opt_ukbd.h
564 INIT_PATH opt_init_path.h
566 ROOTDEVNAME opt_rootdevname.h
569 PCFCLOCK_VERBOSE opt_pcfclock.h
570 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
572 # Polling device handling
573 DEVICE_POLLING opt_polling.h
575 # Network device queue based polling
576 IFPOLL_ENABLE opt_ifpoll.h
578 # options for ubsec driver
579 UBSEC_DEBUG opt_ubsec.h
580 UBSEC_RNDTEST opt_ubsec.h
581 UBSEC_NO_RNG opt_ubsec.h
583 # options for hifn driver
584 HIFN_DEBUG opt_hifn.h
585 HIFN_RNDTEST opt_hifn.h
586 HIFN_NO_RNG opt_hifn.h
593 KTR_USB_MEMORY opt_ktr.h
595 KTR_MSGPORT opt_ktr.h
596 KTR_ENTRIES opt_global.h
597 KTR_VERBOSE opt_ktr.h
598 KTR_GIANT_CONTENTION opt_ktr.h
599 KTR_SPIN_CONTENTION opt_ktr.h
603 KTR_KERNENTRY opt_ktr.h
604 KTR_TESTLOG opt_ktr.h
605 KTR_SERIALIZER opt_ktr.h
606 KTR_POLLING opt_ktr.h
608 KTR_IF_START opt_ktr.h
610 KTR_ETHERNET opt_ktr.h
613 # options for the Atheros driver
615 ATH_DIAGAPI opt_ath.h
620 AH_SUPPORT_AR5416 opt_ah.h
624 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
627 ED_NO_MIIBUS opt_ed.h
630 EMX_RSS_DEBUG opt_emx.h
633 JME_RSS_DEBUG opt_jme.h
636 DCONS_BUF_SIZE opt_dcons.h
637 DCONS_POLL_HZ opt_dcons.h
638 DCONS_FORCE_CONSOLE opt_dcons.h
639 DCONS_FORCE_GDB opt_dcons.h
641 # deprecated drivers and options
642 I_WANT_DEPRECATED_STUFF opt_deprecated.h
646 SCTP_DEBUG opt_sctp.h
647 SCTP_USE_ADLER32 opt_sctp.h
648 SCTP_HIGH_SPEED opt_sctp.h
649 SCTP_STAT_LOGGING opt_sctp.h
650 SCTP_CWND_LOGGING opt_sctp.h
651 SCTP_BLK_LOGGING opt_sctp.h
652 SCTP_STR_LOGGING opt_sctp.h
653 SCTP_FR_LOGGING opt_sctp.h
654 SCTP_MAP_LOGGING opt_sctp.h
656 # syslink kernel support
658 SYSLINK opt_syslink.h
661 DSCHED_FQ opt_dsched.h
663 # Receive Side Scaling (now basecode)
667 WATCHDOG_ENABLE opt_cpu.h
670 WDOG_DISABLE_ON_PANIC opt_panic.h
671 ERROR_LED_ON_PANIC opt_panic.h
673 # 802.11 support layer
674 IEEE80211_DEBUG opt_wlan.h
675 IEEE80211_DEBUG_REFCNT opt_wlan.h
676 IEEE80211_AMPDU_AGE opt_wlan.h
677 IEEE80211_SUPPORT_MESH opt_wlan.h
678 IEEE80211_SUPPORT_SUPERG opt_wlan.h
679 IEEE80211_SUPPORT_TDMA opt_wlan.h
681 # 802.11 TDMA support
682 TDMA_SLOTLEN_DEFAULT opt_tdma.h
683 TDMA_SLOTCNT_DEFAULT opt_tdma.h
684 TDMA_BINTVAL_DEFAULT opt_tdma.h
685 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
686 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
687 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
688 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
689 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
690 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
691 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
692 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
694 PANIC_REBOOT_WAIT_TIME opt_panic.h