1 # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $
3 # On the handling of kernel options
5 # All kernel options should be listed in LINT, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT should compile as much code
8 # as possible. Try to structure option-using code so that a single
9 # option only switch code on, or only switch code off, to make it
10 # possible to have a full compile-test. If necessary, you can include
11 # "opt_lint.h" and check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "platform/<platform>/conf/options". Options that affect a single
16 # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while
17 # options that affect multiple files should either go in
18 # "opt_global.h" if this is a kernel-wide option (used just about
19 # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect
20 # only some files. Note that the effect of listing only an option
21 # without a header-file-name in conf/options (and cousins) is that the
22 # last convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
33 # Adaptec Array Controller driver options
36 # Adaptec aic7xxx SCSI controller options
37 AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory
40 AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable
41 # targetmode operations.
43 AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our
46 AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code.
48 AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options.
49 # See sys/dev/aic7xxx/aic7xxx.h
51 AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug
52 # output. Adds ~15k to driver.
54 # Adaptec aic79xx SCSI controller options
55 AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code.
57 AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options.
58 # See sys/dev/aic7xxx/aic79xx.h
60 AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable
61 # targetmode operations.
63 AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug
64 # output. Adds ~15k to driver.
66 ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory
71 #options for ACPI support
73 ACPI_NO_SEMAPHORES opt_acpi.h
74 ACPI_ENABLE_PCI opt_acpi.h
76 # Miscellaneous options.
77 COMPAT_43 opt_compat.h
78 COMPILING_LINT opt_lint.h
81 DDB_UNATTENDED opt_ddb.h
82 GDB_REMOTE_CHAT opt_ddb.h
115 DIRECTIO opt_directio.h
117 # POSIX kernel options
119 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
120 _KPOSIX_VERSION opt_posix.h
122 # Do we want the config file compiled into the kernel?
123 INCLUDE_CONFIG_FILE opt_config.h
125 # Options for static file systems. These should only be used at config
126 # time, since the corresponding lkms cannot work if there are any static
127 # dependencies. Unusability is enforced by hiding the defines for the
128 # options in a never-included header.
134 MSDOSFS opt_dontuse.h
144 # These static filesystems has one slightly bogus static dependency in
145 # sys/platform/.../i386/autoconf.c. If any of these filesystems are
146 # statically compiled into the kernel, code for mounting them as root
147 # filesystems will be enabled - but look below. Boot-code is purposely
148 # unavailable for the LKM-based versions.
153 # filesystems and libiconv bridge
154 CD9660_ICONV opt_dontuse.h
155 MSDOSFS_ICONV opt_dontuse.h
156 NTFS_ICONV opt_dontuse.h
160 NETSMBCRYPTO opt_netsmb.h
162 # If you are following the conditions in the copyright,
163 # you can enable soft-updates which will speed up a lot of things
164 # and make the system safer from crashes at the same time.
165 # otherwise a STUB module will be compiled in.
166 SOFTUPDATES opt_ffs.h
168 # Enable fast hash lookups for large directories on UFS-based filesystems.
169 UFS_DIRHASH opt_ufs.h
171 # The above static dependencies are planned removed, with a
172 # <filesystem>_ROOT option to control if it usable as root. This list
173 # allows these options to be present in config files already (though
174 # they won't make any difference yet).
176 NFS_ROOT opt_nfsroot.h
178 # The union static file system has bogus static dependencies, so it isn't
182 # Options used only in subr_param.c.
186 NMBCLUSTERS opt_param.h
188 VM_BCACHE_SIZE_MAX opt_param.h
189 VM_SWZONE_SIZE_MAX opt_param.h
195 # Generic SCSI options.
196 CAM_MAX_HIGHPOWER opt_cam.h
198 CAM_DEBUG_DELAY opt_cam.h
199 CAM_DEBUG_BUS opt_cam.h
200 CAM_DEBUG_TARGET opt_cam.h
201 CAM_DEBUG_LUN opt_cam.h
202 CAM_DEBUG_FLAGS opt_cam.h
203 SCSI_DELAY opt_scsi.h
204 SCSI_NO_SENSE_STRINGS opt_scsi.h
205 SCSI_NO_OP_STRINGS opt_scsi.h
208 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
210 # Options used only in cam/scsi/scsi_cd.c
211 CHANGER_MIN_BUSY_SECONDS opt_cd.h
212 CHANGER_MAX_BUSY_SECONDS opt_cd.h
214 # Options used only in cam/scsi/scsi_sa.c.
215 SA_IO_TIMEOUT opt_sa.h
216 SA_SPACE_TIMEOUT opt_sa.h
217 SA_REWIND_TIMEOUT opt_sa.h
218 SA_ERASE_TIMEOUT opt_sa.h
219 SA_1FM_AT_EOD opt_sa.h
221 # Options used only in cam/scsi/scsi_pt.c
222 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
224 # Options used only in cam/scsi/scsi_ses.c
225 SES_ENABLE_PASSTHROUGH opt_ses.h
227 # Options used in dev/sym/ (Symbios SCSI driver).
228 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
229 # Allows the ncr to take precedence
230 # 1 (1<<0) -> 810a, 860
231 # 2 (1<<1) -> 825a, 875, 885, 895
232 # 4 (1<<2) -> 895a, 896, 1510d
233 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
234 # disabled:0 (default), enabled:1
235 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
236 # disabled:0, enabled:1 (default)
237 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
238 # default:8, range:[1..64]
240 # Options used only in pci/ncr.c
241 SCSI_NCR_DEBUG opt_ncr.h
242 SCSI_NCR_MAX_SYNC opt_ncr.h
243 SCSI_NCR_MAX_WIDE opt_ncr.h
244 SCSI_NCR_MYADDR opt_ncr.h
246 # Options used only in pci/isp_pci.c
247 ISP_TARGET_MODE opt_isp.h
249 # Options used in the 'nata' ATA/ATAPI driver
250 ATA_STATIC_ID opt_ata.h
260 ALTQ_FAIRQ opt_altq.h
261 ALTQ_NOPCC opt_altq.h
262 ALTQ_DEBUG opt_altq.h
267 BOOTP_COMPAT opt_bootp.h
268 BOOTP_NFSROOT opt_bootp.h
269 BOOTP_NFSV3 opt_bootp.h
270 BOOTP_WIRED_TO opt_bootp.h
272 MROUTING opt_mrouting.h
277 IPSEC_ESP opt_ipsec.h
278 IPSEC_DEBUG opt_ipsec.h
279 IPSEC_FILTERGIF opt_ipsec.h
280 FAST_IPSEC opt_ipsec.h
283 DUMMYNET_DEBUG opt_ipdn.h
284 IPFIREWALL opt_ipfw.h
285 IPFIREWALL_DEBUG opt_ipfw.h
286 IPFIREWALL_VERBOSE opt_ipfw.h
287 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
288 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
289 IPV6FIREWALL opt_ip6fw.h
290 IPV6FIREWALL_VERBOSE opt_ip6fw.h
291 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
292 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
296 PPP_BSDCOMP opt_ppp.h
297 PPP_DEFLATE opt_ppp.h
299 SLIP_IFF_OPTS opt_slip.h
301 TCP_SIGNATURE opt_inet.h
302 TCP_DROP_SYNFIN opt_tcp_input.h
305 MBUF_STRESS_TEST opt_mbuf_stress_test.h
307 # (New netgraph, port still in progress)
309 # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code.
310 # Each netgraph node type can be either be compiled into the kernel
311 # or loaded dynamically. To get the former, include the corresponding
312 # option below. Each type has its own man page, e.g. ng_async(4).
314 NETGRAPH7_DEBUG opt_netgraph.h
315 NETGRAPH7_ASYNC opt_netgraph.h
316 NETGRAPH7_ATMLLC opt_netgraph.h
317 NETGRAPH7_ATM_ATMPIF opt_netgraph.h
318 NETGRAPH7_BLUETOOTH opt_netgraph.h
319 NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h
320 NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h
321 NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h
322 NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h
323 NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h
324 NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h
325 NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h
326 NETGRAPH7_BPF opt_netgraph.h
327 NETGRAPH7_BRIDGE opt_netgraph.h
328 NETGRAPH7_CAR opt_netgraph.h
329 NETGRAPH7_CISCO opt_netgraph.h
330 NETGRAPH7_DEFLATE opt_netgraph.h
331 NETGRAPH7_DEVICE opt_netgraph.h
332 NETGRAPH7_ECHO opt_netgraph.h
333 NETGRAPH7_EIFACE opt_netgraph.h
334 NETGRAPH7_ETF opt_netgraph.h
335 NETGRAPH7_ETHER opt_netgraph.h
336 NETGRAPH7_FEC opt_netgraph.h
337 NETGRAPH7_FRAME_RELAY opt_netgraph.h
338 NETGRAPH7_GIF opt_netgraph.h
339 NETGRAPH7_GIF_DEMUX opt_netgraph.h
340 NETGRAPH7_HOLE opt_netgraph.h
341 NETGRAPH7_HUB opt_netgraph.h
342 NETGRAPH7_IFACE opt_netgraph.h
343 NETGRAPH7_IP_INPUT opt_netgraph.h
344 NETGRAPH7_IPFW opt_netgraph.h
345 NETGRAPH7_KSOCKET opt_netgraph.h
346 NETGRAPH7_L2TP opt_netgraph.h
347 NETGRAPH7_LMI opt_netgraph.h
348 # MPPC compression requires proprietary files (not included)
349 NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h
350 NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h
351 NETGRAPH7_NAT opt_netgraph.h
352 NETGRAPH7_NETFLOW opt_netgraph.h
353 NETGRAPH7_ONE2MANY opt_netgraph.h
354 NETGRAPH7_PPP opt_netgraph.h
355 NETGRAPH7_PPPOE opt_netgraph.h
356 NETGRAPH7_PPTPGRE opt_netgraph.h
357 NETGRAPH7_PRED1 opt_netgraph.h
358 NETGRAPH7_RFC1490 opt_netgraph.h
359 NETGRAPH7_SOCKET opt_netgraph.h
360 NETGRAPH7_SPLIT opt_netgraph.h
361 NETGRAPH7_SPPP opt_netgraph.h
362 NETGRAPH7_TAG opt_netgraph.h
363 NETGRAPH7_TCPMSS opt_netgraph.h
364 NETGRAPH7_TEE opt_netgraph.h
365 NETGRAPH7_TTY opt_netgraph.h
366 NETGRAPH7_UI opt_netgraph.h
367 NETGRAPH7_VJC opt_netgraph.h
370 NGATM7_ATM opt_netgraph.h
371 NGATM7_ATMBASE opt_netgraph.h
372 NGATM7_SSCOP opt_netgraph.h
373 NGATM7_SSCFU opt_netgraph.h
374 NGATM7_UNI opt_netgraph.h
375 NGATM7_CCATM opt_netgraph.h
377 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
378 # Each netgraph node type can be either be compiled into the kernel
379 # or loaded dynamically. To get the former, include the corresponding
380 # option below. Each type has its own man page, e.g. ng_async(8).
382 NETGRAPH_ASYNC opt_netgraph.h
383 NETGRAPH_BPF opt_netgraph.h
384 NETGRAPH_BRIDGE opt_netgraph.h
385 NETGRAPH_CISCO opt_netgraph.h
386 NETGRAPH_ECHO opt_netgraph.h
387 NETGRAPH_EIFACE opt_netgraph.h
388 NETGRAPH_ETHER opt_netgraph.h
389 NETGRAPH_FEC opt_netgraph.h
390 NETGRAPH_FRAME_RELAY opt_netgraph.h
391 NETGRAPH_HOLE opt_netgraph.h
392 NETGRAPH_IFACE opt_netgraph.h
393 NETGRAPH_KSOCKET opt_netgraph.h
394 NETGRAPH_LMI opt_netgraph.h
395 NETGRAPH_L2TP opt_netgraph.h
396 # MPPC compression requires proprietary files (not included)
397 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
398 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
399 NETGRAPH_ONE2MANY opt_netgraph.h
400 NETGRAPH_PPP opt_netgraph.h
401 NETGRAPH_PPPOE opt_netgraph.h
402 NETGRAPH_PPTPGRE opt_netgraph.h
403 NETGRAPH_RFC1490 opt_netgraph.h
404 NETGRAPH_SOCKET opt_netgraph.h
405 NETGRAPH_TEE opt_netgraph.h
406 NETGRAPH_TTY opt_netgraph.h
407 NETGRAPH_UI opt_netgraph.h
408 NETGRAPH_VJC opt_netgraph.h
417 # DPT driver debug flags
418 DPT_MEASURE_PERFORMANCE opt_dpt.h
419 DPT_HANDLE_TIMEOUTS opt_dpt.h
420 DPT_TIMEOUT_FACTOR opt_dpt.h
421 DPT_LOST_IRQ opt_dpt.h
422 DPT_RESET_HBA opt_dpt.h
424 # Misc debug flags. Most of these should probably be replaced with
425 # 'DEBUG', and then let people recompile just the interesting modules
426 # with 'make CC="cc -DDEBUG"'.
427 CLUSTERDEBUG opt_debug_cluster.h
428 DEBUG_1284 opt_ppb_1284.h
431 PLIP_DEBUG opt_plip.h
432 LOCKF_DEBUG opt_debug_lockf.h
433 SI_DEBUG opt_debug_si.h
437 FB_INSTALL_CDEV opt_fb.h
439 # ppbus related options
440 PERIPH_1284 opt_ppb_1284.h
441 DONTPROBE_1284 opt_ppb_1284.h
443 # smbus related options
444 ENABLE_ALART opt_intpm.h
446 # These cause changes all over the kernel
447 NO_LWKT_SPLIT_USERPRI opt_global.h
448 BLKDEV_IOSIZE opt_global.h
450 DEBUG_LOCKS opt_global.h
451 DEBUG_LOCKS_LATENCY opt_global.h
452 DEBUG_CRIT_SECTIONS opt_global.h
453 DIAGNOSTIC opt_global.h
454 INVARIANTS opt_global.h
455 VFS_BIO_DEBUG opt_global.h
456 DEBUG_INTERRUPTS opt_global.h
457 SOCKBUF_DEBUG opt_global.h
458 PANIC_DEBUG opt_global.h
459 MBUF_DEBUG opt_global.h
460 PMAP_DEBUG opt_global.h
461 VM_PAGE_DEBUG opt_global.h
462 SLAB_DEBUG opt_global.h
464 # Sample system/interrupt PC
465 DEBUG_PCTRACK opt_pctrack.h
467 # These are VM related options
473 # Size of the kernel message buffer
474 MSGBUF_SIZE opt_msgbuf.h
476 # PCI related options
480 NFS_MINATTRTIMO opt_nfs.h
481 NFS_MAXATTRTIMO opt_nfs.h
482 NFS_MINDIRATTRTIMO opt_nfs.h
483 NFS_MAXDIRATTRTIMO opt_nfs.h
484 NFS_GATHERDELAY opt_nfs.h
485 NFS_UIDHASHSIZ opt_nfs.h
486 NFS_WDELAYHASHSIZ opt_nfs.h
487 NFS_MUIDHASHSIZ opt_nfs.h
488 NFS_NOSERVER opt_nfs.h
492 MSDOSFS_DEBUG opt_msdosfs.h
494 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
495 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
496 BROOKTREE_ALLOC_PAGES opt_bktr.h
497 BKTR_OVERRIDE_CARD opt_bktr.h
498 BKTR_OVERRIDE_TUNER opt_bktr.h
499 BKTR_OVERRIDE_DBX opt_bktr.h
500 BKTR_OVERRIDE_MSP opt_bktr.h
501 BKTR_SYSTEM_DEFAULT opt_bktr.h
502 BKTR_ALLOC_PAGES opt_bktr.h
503 BKTR_USE_PLL opt_bktr.h
504 BKTR_GPIO_ACCESS opt_bktr.h
505 BKTR_NO_MSP_RESET opt_bktr.h
506 BKTR_430_FX_MODE opt_bktr.h
507 BKTR_SIS_VIA_MODE opt_bktr.h
508 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
510 # Various mi ISA bus flags
512 COM_MULTIPORT opt_sio.h
513 BREAK_TO_DEBUGGER opt_comconsole.h
514 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
516 # options for bus/device framework
519 # options for USB support
524 VINUMDEBUG opt_vinum.h
526 # Embedded system options
527 UKBD_DFLT_KEYMAP opt_ukbd.h
528 INIT_PATH opt_init_path.h
530 ROOTDEVNAME opt_rootdevname.h
533 PCFCLOCK_VERBOSE opt_pcfclock.h
534 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
536 # Network device queue based polling
537 IFPOLL_ENABLE opt_ifpoll.h
539 # options for ubsec driver
540 UBSEC_DEBUG opt_ubsec.h
541 UBSEC_RNDTEST opt_ubsec.h
542 UBSEC_NO_RNG opt_ubsec.h
544 # options for hifn driver
545 HIFN_DEBUG opt_hifn.h
546 HIFN_RNDTEST opt_hifn.h
547 HIFN_NO_RNG opt_hifn.h
549 # options for safenet driver
550 SAFE_DEBUG opt_safe.h
551 SAFE_NO_RNG opt_safe.h
552 SAFE_RNDTEST opt_safe.h
556 KTR_ENTRIES opt_global.h
558 KTR_ACPI_EC opt_ktr.h
560 KTR_DMCRYPT opt_ktr.h
561 KTR_DSCHED_BFQ opt_ktr.h
562 KTR_ETHERNET opt_ktr.h
568 KTR_IF_START opt_ktr.h
570 KTR_KERNENTRY opt_ktr.h
572 KTR_SERIALIZER opt_ktr.h
573 KTR_SPIN_CONTENTION opt_ktr.h
574 KTR_TESTLOG opt_ktr.h
577 KTR_USB_MEMORY opt_ktr.h
578 KTR_USCHED_BSD4 opt_ktr.h
579 KTR_USCHED_DFLY opt_ktr.h
580 KTR_VERBOSE opt_ktr.h
581 KTR_IF_POLL opt_ktr.h
585 NTFS_DEBUG opt_ntfs.h
587 # options for the Atheros driver
589 #ATH_DEBUG_ALQ opt_ath.h
590 ATH_DIAGAPI opt_ath.h
591 #ATH_EEPROM_FIRMWARE opt_ath.h
592 #ATH_ENABLE_11N opt_ath.h
593 ATH_ENABLE_DFS opt_ath.h
594 #ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
595 ATH_KTR_INTR_DEBUG opt_ath.h
597 #ATH_TX99_DIAG opt_ath.h
601 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
604 #AH_DEBUG_ALQ opt_ah.h
605 #AH_DEBUG_COUNTRY opt_ah.h
606 AH_INTERRUPT_DEBUGGING opt_ah.h
608 AH_NEED_DESC_SWAP opt_ah.h
609 AH_PRIVATE_DIAG opt_ah.h
610 AH_REGOPS_FUNC opt_ah.h
611 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
612 AH_SUPPORT_AR5416 opt_ah.h
613 AH_SUPPORT_AR9130 opt_ah.h
614 AH_SUPPORT_AR9330 opt_ah.h
615 AH_SUPPORT_AR9340 opt_ah.h
616 AH_USE_INIPDGAIN opt_ah.h
617 #AH_WRITE_EEPROM opt_ah.h
618 #AH_WRITE_REGDOMAIN opt_ah.h
621 BCE_RSS_DEBUG opt_bce.h
622 BCE_TSS_DEBUG opt_bce.h
625 BNX_RSS_DEBUG opt_bnx.h
626 BNX_TSO_DEBUG opt_bnx.h
627 BNX_TSS_DEBUG opt_bnx.h
631 BWN_RXRING_SLOTS opt_bwn.h
632 BWN_TXRING_SLOTS opt_bwn.h
635 SIBA_DEBUG opt_siba.h
638 ED_NO_MIIBUS opt_ed.h
641 EMX_RSS_DEBUG opt_emx.h
642 EMX_TSO_DEBUG opt_emx.h
643 EMX_TSS_DEBUG opt_emx.h
646 JME_RSS_DEBUG opt_jme.h
649 IGB_RSS_DEBUG opt_igb.h
650 IGB_TSS_DEBUG opt_igb.h
651 IGB_MSIX_DEBUG opt_igb.h
654 IX_RSS_DEBUG opt_ix.h
656 # Options for the Intel 802.11n wireless driver
660 DCONS_BUF_SIZE opt_dcons.h
661 DCONS_POLL_HZ opt_dcons.h
662 DCONS_FORCE_CONSOLE opt_dcons.h
663 DCONS_FORCE_GDB opt_dcons.h
665 # deprecated drivers and options
666 I_WANT_DEPRECATED_STUFF opt_deprecated.h
670 SCTP_DEBUG opt_sctp.h
671 SCTP_USE_ADLER32 opt_sctp.h
672 SCTP_HIGH_SPEED opt_sctp.h
673 SCTP_STAT_LOGGING opt_sctp.h
674 SCTP_CWND_LOGGING opt_sctp.h
675 SCTP_BLK_LOGGING opt_sctp.h
676 SCTP_STR_LOGGING opt_sctp.h
677 SCTP_FR_LOGGING opt_sctp.h
678 SCTP_MAP_LOGGING opt_sctp.h
681 DSCHED_AS opt_dsched.h
682 DSCHED_BFQ opt_dsched.h
683 DSCHED_FQ opt_dsched.h
685 # Receive Side Scaling (now basecode)
689 WDOG_DISABLE_ON_PANIC opt_panic.h
690 ERROR_LED_ON_PANIC opt_panic.h
692 # 802.11 support layer
693 IEEE80211_DEBUG opt_wlan.h
694 IEEE80211_DEBUG_REFCNT opt_wlan.h
695 IEEE80211_AMPDU_AGE opt_wlan.h
696 IEEE80211_SUPPORT_MESH opt_wlan.h
697 IEEE80211_SUPPORT_SUPERG opt_wlan.h
698 IEEE80211_SUPPORT_TDMA opt_wlan.h
700 # 802.11 TDMA support
701 TDMA_SLOTLEN_DEFAULT opt_tdma.h
702 TDMA_SLOTCNT_DEFAULT opt_tdma.h
703 TDMA_BINTVAL_DEFAULT opt_tdma.h
704 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
705 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
706 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
707 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
708 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
709 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
710 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
711 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
713 PANIC_REBOOT_WAIT_TIME opt_panic.h
715 # Obsolete options (will be removed in the future)
717 DEVICE_POLLING opt_dontuse.h