2 * Copyright (c) 2008 Yahoo!, Inc.
4 * Written by: John Baldwin <jhb@FreeBSD.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of the author nor the names of any co-contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * $FreeBSD: src/usr.sbin/mptutil/mpt_show.c,v 1.2 2010/02/19 14:31:01 jhb Exp $
33 #include <sys/param.h>
34 #include <sys/errno.h>
45 #define STANDALONE_STATE "ONLINE"
48 format_stripe(char *buf, size_t buflen, U32 stripe)
51 humanize_number(buf, buflen, stripe * 512, "", HN_AUTOSCALE,
56 display_stripe_map(const char *label, U32 StripeMap)
62 printf("%s: ", label);
63 for (i = 0; StripeMap != 0; i++, StripeMap >>= 1)
65 format_stripe(stripe, sizeof(stripe), 1 << i);
75 show_adapter(int ac, char **av __unused)
77 CONFIG_PAGE_MANUFACTURING_0 *man0;
78 CONFIG_PAGE_IOC_2 *ioc2;
79 CONFIG_PAGE_IOC_6 *ioc6;
84 warnx("show adapter: extra arguments");
88 fd = mpt_open(mpt_unit);
94 man0 = mpt_read_man_page(fd, 0, NULL);
96 warn("Failed to get controller info");
99 if (man0->Header.PageLength < sizeof(*man0) / 4) {
100 warn("Invalid controller info");
103 printf("mpt%d Adapter:\n", mpt_unit);
104 printf(" Board Name: %.16s\n", man0->BoardName);
105 printf(" Board Assembly: %.16s\n", man0->BoardAssembly);
106 printf(" Chip Name: %.16s\n", man0->ChipName);
107 printf(" Chip Revision: %.16s\n", man0->ChipRevision);
111 ioc2 = mpt_read_ioc_page(fd, 2, &IOCStatus);
113 printf(" RAID Levels:");
115 if (ioc2->CapabilitiesFlags &
116 MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT) {
120 if (ioc2->CapabilitiesFlags &
121 MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT) {
122 printf("%s RAID1", comma ? "," : "");
125 if (ioc2->CapabilitiesFlags &
126 MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT) {
127 printf("%s RAID1E", comma ? "," : "");
130 if (ioc2->CapabilitiesFlags &
131 MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT) {
132 printf("%s RAID5", comma ? "," : "");
135 if (ioc2->CapabilitiesFlags &
136 MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT) {
137 printf("%s RAID6", comma ? "," : "");
140 if (ioc2->CapabilitiesFlags &
141 MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT) {
142 printf("%s RAID10", comma ? "," : "");
145 if (ioc2->CapabilitiesFlags &
146 MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT) {
147 printf("%s RAID50", comma ? "," : "");
154 } else if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
155 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
156 warnx("mpt_read_ioc_page(2): %s", mpt_ioc_status(IOCStatus));
158 ioc6 = mpt_read_ioc_page(fd, 6, &IOCStatus);
160 display_stripe_map(" RAID0 Stripes",
161 ioc6->SupportedStripeSizeMapIS);
162 display_stripe_map(" RAID1E Stripes",
163 ioc6->SupportedStripeSizeMapIME);
164 printf(" RAID0 Drives/Vol: %u", ioc6->MinDrivesIS);
165 if (ioc6->MinDrivesIS != ioc6->MaxDrivesIS)
166 printf("-%u", ioc6->MaxDrivesIS);
168 printf(" RAID1 Drives/Vol: %u", ioc6->MinDrivesIM);
169 if (ioc6->MinDrivesIM != ioc6->MaxDrivesIM)
170 printf("-%u", ioc6->MaxDrivesIM);
172 printf("RAID1E Drives/Vol: %u", ioc6->MinDrivesIME);
173 if (ioc6->MinDrivesIME != ioc6->MaxDrivesIME)
174 printf("-%u", ioc6->MaxDrivesIME);
177 } else if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
178 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
179 warnx("mpt_read_ioc_page(6): %s", mpt_ioc_status(IOCStatus));
181 /* TODO: Add an ioctl to fetch IOC_FACTS and print firmware version. */
187 MPT_COMMAND(show, adapter, show_adapter);
190 print_vol(CONFIG_PAGE_RAID_VOL_0 *info, int state_len)
193 const char *level, *state;
194 char buf[6], stripe[5];
196 size = ((uint64_t)info->MaxLBAHigh << 32) | info->MaxLBA;
197 humanize_number(buf, sizeof(buf), (size + 1) * 512, "", HN_AUTOSCALE,
198 HN_B | HN_NOSPACE | HN_DECIMAL);
199 if (info->VolumeType == MPI_RAID_VOL_TYPE_IM)
202 format_stripe(stripe, sizeof(stripe), info->StripeSize);
203 level = mpt_raid_level(info->VolumeType);
204 state = mpt_volstate(info->VolumeStatus.State);
206 printf("(%6s) %-8s %6s %-*s", buf, level, stripe, state_len,
208 else if (stripe[0] != '\0')
209 printf("(%s) %s %s %s", buf, level, stripe, state);
211 printf("(%s) %s %s", buf, level, state);
215 print_pd(CONFIG_PAGE_RAID_PHYS_DISK_0 *info, int state_len, int location)
217 const char *inq, *state;
220 humanize_number(buf, sizeof(buf), ((uint64_t)info->MaxLBA + 1) * 512,
221 "", HN_AUTOSCALE, HN_B | HN_NOSPACE |HN_DECIMAL);
222 state = mpt_pdstate(info);
224 printf("(%6s) %-*s", buf, state_len, state);
226 printf("(%s) %s", buf, state);
227 inq = mpt_pd_inq_string(info);
232 printf(" bus %d id %d", info->PhysDiskBus, info->PhysDiskID);
236 print_standalone(struct mpt_standalone_disk *disk, int state_len, int location)
240 humanize_number(buf, sizeof(buf), (disk->maxlba + 1) * 512,
241 "", HN_AUTOSCALE, HN_B | HN_NOSPACE |HN_DECIMAL);
243 printf("(%6s) %-*s", buf, state_len, STANDALONE_STATE);
245 printf("(%s) %s", buf, STANDALONE_STATE);
246 if (disk->inqstring[0] != '\0')
247 printf(" %s", disk->inqstring);
250 printf(" bus %d id %d", disk->bus, disk->target);
254 print_spare_pools(U8 HotSparePool)
258 if (HotSparePool == 0) {
262 for (i = 0; HotSparePool != 0; i++) {
263 if (HotSparePool & 1) {
265 if (HotSparePool == 1)
274 show_config(int ac, char **av __unused)
276 CONFIG_PAGE_IOC_2 *ioc2;
277 CONFIG_PAGE_IOC_2_RAID_VOL *vol;
278 CONFIG_PAGE_IOC_5 *ioc5;
279 IOC_5_HOT_SPARE *spare;
280 CONFIG_PAGE_RAID_VOL_0 *vinfo;
281 RAID_VOL0_PHYS_DISK *disk;
282 CONFIG_PAGE_RAID_VOL_1 *vnames;
283 CONFIG_PAGE_RAID_PHYS_DISK_0 *pinfo;
284 struct mpt_standalone_disk *sdisks;
285 int fd, i, j, nsdisks;
288 warnx("show config: extra arguments");
292 fd = mpt_open(mpt_unit);
298 /* Get the config from the controller. */
299 ioc2 = mpt_read_ioc_page(fd, 2, NULL);
300 ioc5 = mpt_read_ioc_page(fd, 5, NULL);
301 if (ioc2 == NULL || ioc5 == NULL) {
302 warn("Failed to get config");
305 if (mpt_fetch_disks(fd, &nsdisks, &sdisks) < 0) {
306 warn("Failed to get standalone drive list");
310 /* Dump out the configuration. */
311 printf("mpt%d Configuration: %d volumes, %d drives\n",
312 mpt_unit, ioc2->NumActiveVolumes, ioc2->NumActivePhysDisks +
314 vol = ioc2->RaidVolume;
315 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
316 printf(" volume %s ", mpt_volume_name(vol->VolumeBus,
318 vinfo = mpt_vol_info(fd, vol->VolumeBus, vol->VolumeID, NULL);
320 printf("%s UNKNOWN", mpt_raid_level(vol->VolumeType));
322 print_vol(vinfo, -1);
323 vnames = mpt_vol_names(fd, vol->VolumeBus, vol->VolumeID, NULL);
324 if (vnames != NULL) {
325 if (vnames->Name[0] != '\0')
326 printf(" <%s>", vnames->Name);
334 disk = vinfo->PhysDisk;
335 for (j = 0; j < vinfo->NumPhysDisks; disk++, j++) {
336 printf(" drive %u ", disk->PhysDiskNum);
337 pinfo = mpt_pd_info(fd, disk->PhysDiskNum, NULL);
339 print_pd(pinfo, -1, 0);
344 if (vinfo->VolumeSettings.HotSparePool != 0) {
345 printf(" spare pools: ");
346 print_spare_pools(vinfo->VolumeSettings.HotSparePool);
352 spare = ioc5->HotSpare;
353 for (i = 0; i < ioc5->NumHotSpares; spare++, i++) {
354 printf(" spare %u ", spare->PhysDiskNum);
355 pinfo = mpt_pd_info(fd, spare->PhysDiskNum, NULL);
357 print_pd(pinfo, -1, 0);
360 printf(" backs pool %d\n", ffs(spare->HotSparePool) - 1);
362 for (i = 0; i < nsdisks; i++) {
363 printf(" drive %s ", sdisks[i].devname);
364 print_standalone(&sdisks[i], -1, 0);
374 MPT_COMMAND(show, config, show_config);
377 show_volumes(int ac, char **av __unused)
379 CONFIG_PAGE_IOC_2 *ioc2;
380 CONFIG_PAGE_IOC_2_RAID_VOL *vol;
381 CONFIG_PAGE_RAID_VOL_0 **volumes;
382 CONFIG_PAGE_RAID_VOL_1 *vnames;
383 int fd, i, len, state_len;
386 warnx("show volumes: extra arguments");
390 fd = mpt_open(mpt_unit);
396 /* Get the volume list from the controller. */
397 ioc2 = mpt_read_ioc_page(fd, 2, NULL);
399 warn("Failed to get volume list");
404 * Go ahead and read the info for all the volumes and figure
405 * out the maximum width of the state field.
407 volumes = malloc(sizeof(*volumes) * ioc2->NumActiveVolumes);
408 state_len = strlen("State");
409 vol = ioc2->RaidVolume;
410 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
411 volumes[i] = mpt_vol_info(fd, vol->VolumeBus, vol->VolumeID,
413 if (volumes[i] == NULL)
414 len = strlen("UNKNOWN");
416 len = strlen(mpt_volstate(
417 volumes[i]->VolumeStatus.State));
421 printf("mpt%d Volumes:\n", mpt_unit);
422 printf(" Id Size Level Stripe ");
423 len = state_len - strlen("State");
424 for (i = 0; i < (len + 1) / 2; i++)
427 for (i = 0; i < len / 2; i++)
429 printf(" Write-Cache Name\n");
430 vol = ioc2->RaidVolume;
431 for (i = 0; i < ioc2->NumActiveVolumes; vol++, i++) {
432 printf("%6s ", mpt_volume_name(vol->VolumeBus, vol->VolumeID));
433 if (volumes[i] != NULL)
434 print_vol(volumes[i], state_len);
437 mpt_raid_level(vol->VolumeType), state_len,
439 if (volumes[i] != NULL) {
440 if (volumes[i]->VolumeSettings.Settings &
441 MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE)
444 printf(" Disabled ");
448 vnames = mpt_vol_names(fd, vol->VolumeBus, vol->VolumeID, NULL);
449 if (vnames != NULL) {
450 if (vnames->Name[0] != '\0')
451 printf(" <%s>", vnames->Name);
461 MPT_COMMAND(show, volumes, show_volumes);
464 show_drives(int ac, char **av __unused)
466 struct mpt_drive_list *list;
467 struct mpt_standalone_disk *sdisks;
468 int fd, i, len, nsdisks, state_len;
471 warnx("show drives: extra arguments");
475 fd = mpt_open(mpt_unit);
481 /* Get the drive list. */
482 list = mpt_pd_list(fd);
484 warn("Failed to get drive list");
488 /* Fetch the list of standalone disks for this controller. */
490 if (mpt_fetch_disks(fd, &nsdisks, &sdisks) != 0) {
495 state_len = strlen(STANDALONE_STATE);
497 /* Walk the drive list to determine width of state column. */
498 for (i = 0; i < list->ndrives; i++) {
499 len = strlen(mpt_pdstate(list->drives[i]));
504 /* List the drives. */
505 printf("mpt%d Physical Drives:\n", mpt_unit);
506 for (i = 0; i < list->ndrives; i++) {
507 printf("%4u ", list->drives[i]->PhysDiskNum);
508 print_pd(list->drives[i], state_len, 1);
511 mpt_free_pd_list(list);
512 for (i = 0; i < nsdisks; i++) {
513 printf("%4s ", sdisks[i].devname);
514 print_standalone(&sdisks[i], state_len, 1);
523 MPT_COMMAND(show, drives, show_drives);
527 show_physdisks(int ac, char **av)
529 CONFIG_PAGE_RAID_PHYS_DISK_0 *pinfo;
534 warnx("show drives: extra arguments");
538 fd = mpt_open(mpt_unit);
544 /* Try to find each possible phys disk page. */
545 for (i = 0; i <= 0xff; i++) {
546 pinfo = mpt_pd_info(fd, i, &IOCStatus);
548 if ((IOCStatus & MPI_IOCSTATUS_MASK) !=
549 MPI_IOCSTATUS_CONFIG_INVALID_PAGE)
550 warnx("mpt_pd_info(%d): %s", i,
551 mpt_ioc_status(IOCStatus));
555 print_pd(pinfo, -1, 1);
563 MPT_COMMAND(show, pd, show_physdisks);