1 /* $NetBSD: if_stge.c,v 1.32 2005/12/11 12:22:49 christos Exp $ */
2 /* $FreeBSD: src/sys/dev/stge/if_stge.c,v 1.2 2006/08/12 01:21:36 yongari Exp $ */
5 * Copyright (c) 2001 The NetBSD Foundation, Inc.
8 * This code is derived from software contributed to The NetBSD Foundation
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the NetBSD
22 * Foundation, Inc. and its contributors.
23 * 4. Neither the name of The NetBSD Foundation nor the names of its
24 * contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGE.
41 * Device driver for the Sundance Tech. TC9021 10/100/1000
42 * Ethernet controller.
45 #include "opt_ifpoll.h"
47 #include <sys/param.h>
49 #include <sys/endian.h>
50 #include <sys/kernel.h>
51 #include <sys/interrupt.h>
52 #include <sys/malloc.h>
54 #include <sys/module.h>
56 #include <sys/serialize.h>
57 #include <sys/socket.h>
58 #include <sys/sockio.h>
59 #include <sys/sysctl.h>
62 #include <net/ethernet.h>
64 #include <net/if_arp.h>
65 #include <net/if_dl.h>
66 #include <net/if_media.h>
67 #include <net/if_poll.h>
68 #include <net/if_types.h>
69 #include <net/ifq_var.h>
70 #include <net/vlan/if_vlan_var.h>
71 #include <net/vlan/if_vlan_ether.h>
73 #include <dev/netif/mii_layer/mii.h>
74 #include <dev/netif/mii_layer/miivar.h>
76 #include <bus/pci/pcireg.h>
77 #include <bus/pci/pcivar.h>
79 #include "if_stgereg.h"
80 #include "if_stgevar.h"
82 #define STGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
84 /* "device miibus" required. See GENERIC if you get errors here. */
85 #include "miibus_if.h"
88 * Devices supported by this driver.
90 static struct stge_product {
91 uint16_t stge_vendorid;
92 uint16_t stge_deviceid;
93 const char *stge_name;
95 { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST1023,
96 "Sundance ST-1023 Gigabit Ethernet" },
98 { VENDOR_SUNDANCETI, DEVICEID_SUNDANCETI_ST2021,
99 "Sundance ST-2021 Gigabit Ethernet" },
101 { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021,
102 "Tamarack TC9021 Gigabit Ethernet" },
104 { VENDOR_TAMARACK, DEVICEID_TAMARACK_TC9021_ALT,
105 "Tamarack TC9021 Gigabit Ethernet" },
108 * The Sundance sample boards use the Sundance vendor ID,
109 * but the Tamarack product ID.
111 { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021,
112 "Sundance TC9021 Gigabit Ethernet" },
114 { VENDOR_SUNDANCETI, DEVICEID_TAMARACK_TC9021_ALT,
115 "Sundance TC9021 Gigabit Ethernet" },
117 { VENDOR_DLINK, DEVICEID_DLINK_DL2000,
118 "D-Link DL-2000 Gigabit Ethernet" },
120 { VENDOR_ANTARES, DEVICEID_ANTARES_TC9021,
121 "Antares Gigabit Ethernet" },
126 static int stge_probe(device_t);
127 static int stge_attach(device_t);
128 static int stge_detach(device_t);
129 static void stge_shutdown(device_t);
130 static int stge_suspend(device_t);
131 static int stge_resume(device_t);
133 static int stge_encap(struct stge_softc *, struct mbuf **);
134 static void stge_start(struct ifnet *, struct ifaltq_subque *);
135 static void stge_watchdog(struct ifnet *);
136 static int stge_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
137 static void stge_init(void *);
138 static void stge_vlan_setup(struct stge_softc *);
139 static void stge_stop(struct stge_softc *);
140 static void stge_start_tx(struct stge_softc *);
141 static void stge_start_rx(struct stge_softc *);
142 static void stge_stop_tx(struct stge_softc *);
143 static void stge_stop_rx(struct stge_softc *);
145 static void stge_reset(struct stge_softc *, uint32_t);
146 static int stge_eeprom_wait(struct stge_softc *);
147 static void stge_read_eeprom(struct stge_softc *, int, uint16_t *);
148 static void stge_tick(void *);
149 static void stge_stats_update(struct stge_softc *);
150 static void stge_set_filter(struct stge_softc *);
151 static void stge_set_multi(struct stge_softc *);
153 static void stge_link(struct stge_softc *);
154 static void stge_intr(void *);
155 static __inline int stge_tx_error(struct stge_softc *);
156 static void stge_txeof(struct stge_softc *);
157 static void stge_rxeof(struct stge_softc *, int);
158 static __inline void stge_discard_rxbuf(struct stge_softc *, int);
159 static int stge_newbuf(struct stge_softc *, int, int);
161 static __inline struct mbuf *stge_fixup_rx(struct stge_softc *, struct mbuf *);
164 static void stge_mii_sync(struct stge_softc *);
165 static void stge_mii_send(struct stge_softc *, uint32_t, int);
166 static int stge_mii_readreg(struct stge_softc *, struct stge_mii_frame *);
167 static int stge_mii_writereg(struct stge_softc *, struct stge_mii_frame *);
168 static int stge_miibus_readreg(device_t, int, int);
169 static int stge_miibus_writereg(device_t, int, int, int);
170 static void stge_miibus_statchg(device_t);
171 static int stge_mediachange(struct ifnet *);
172 static void stge_mediastatus(struct ifnet *, struct ifmediareq *);
174 static int stge_dma_alloc(struct stge_softc *);
175 static void stge_dma_free(struct stge_softc *);
176 static void stge_dma_wait(struct stge_softc *);
177 static void stge_init_tx_ring(struct stge_softc *);
178 static int stge_init_rx_ring(struct stge_softc *);
180 static void stge_npoll(struct ifnet *, struct ifpoll_info *);
181 static void stge_npoll_compat(struct ifnet *, void *, int);
184 static int sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS);
185 static int sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS);
187 static device_method_t stge_methods[] = {
188 /* Device interface */
189 DEVMETHOD(device_probe, stge_probe),
190 DEVMETHOD(device_attach, stge_attach),
191 DEVMETHOD(device_detach, stge_detach),
192 DEVMETHOD(device_shutdown, stge_shutdown),
193 DEVMETHOD(device_suspend, stge_suspend),
194 DEVMETHOD(device_resume, stge_resume),
197 DEVMETHOD(miibus_readreg, stge_miibus_readreg),
198 DEVMETHOD(miibus_writereg, stge_miibus_writereg),
199 DEVMETHOD(miibus_statchg, stge_miibus_statchg),
205 static driver_t stge_driver = {
208 sizeof(struct stge_softc)
211 static devclass_t stge_devclass;
213 DECLARE_DUMMY_MODULE(if_stge);
214 MODULE_DEPEND(if_stge, miibus, 1, 1, 1);
215 DRIVER_MODULE(if_stge, pci, stge_driver, stge_devclass, NULL, NULL);
216 DRIVER_MODULE(miibus, stge, miibus_driver, miibus_devclass, NULL, NULL);
219 CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) | (x))
221 CSR_WRITE_1(sc, STGE_PhyCtrl, CSR_READ_1(sc, STGE_PhyCtrl) & ~(x))
224 * Sync the PHYs by setting data bit and strobing the clock 32 times.
227 stge_mii_sync(struct stge_softc *sc)
231 MII_SET(PC_MgmtDir | PC_MgmtData);
233 for (i = 0; i < 32; i++) {
242 * Clock a series of bits through the MII.
245 stge_mii_send(struct stge_softc *sc, uint32_t bits, int cnt)
251 for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
253 MII_SET(PC_MgmtData);
255 MII_CLR(PC_MgmtData);
264 * Read an PHY register through the MII.
267 stge_mii_readreg(struct stge_softc *sc, struct stge_mii_frame *frame)
272 * Set up frame for RX.
274 frame->mii_stdelim = STGE_MII_STARTDELIM;
275 frame->mii_opcode = STGE_MII_READOP;
276 frame->mii_turnaround = 0;
279 CSR_WRITE_1(sc, STGE_PhyCtrl, 0 | sc->sc_PhyCtrl);
288 * Send command/address info.
290 stge_mii_send(sc, frame->mii_stdelim, 2);
291 stge_mii_send(sc, frame->mii_opcode, 2);
292 stge_mii_send(sc, frame->mii_phyaddr, 5);
293 stge_mii_send(sc, frame->mii_regaddr, 5);
299 MII_CLR((PC_MgmtClk | PC_MgmtData));
307 ack = CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData;
312 * Now try reading data bits. If the ack failed, we still
313 * need to clock through 16 cycles to keep the PHY(s) in sync.
316 for(i = 0; i < 16; i++) {
325 for (i = 0x8000; i; i >>= 1) {
329 if (CSR_READ_1(sc, STGE_PhyCtrl) & PC_MgmtData)
330 frame->mii_data |= i;
349 * Write to a PHY register through the MII.
352 stge_mii_writereg(struct stge_softc *sc, struct stge_mii_frame *frame)
356 * Set up frame for TX.
358 frame->mii_stdelim = STGE_MII_STARTDELIM;
359 frame->mii_opcode = STGE_MII_WRITEOP;
360 frame->mii_turnaround = STGE_MII_TURNAROUND;
363 * Turn on data output.
369 stge_mii_send(sc, frame->mii_stdelim, 2);
370 stge_mii_send(sc, frame->mii_opcode, 2);
371 stge_mii_send(sc, frame->mii_phyaddr, 5);
372 stge_mii_send(sc, frame->mii_regaddr, 5);
373 stge_mii_send(sc, frame->mii_turnaround, 2);
374 stge_mii_send(sc, frame->mii_data, 16);
391 * sc_miibus_readreg: [mii interface function]
393 * Read a PHY register on the MII of the TC9021.
396 stge_miibus_readreg(device_t dev, int phy, int reg)
398 struct stge_softc *sc;
399 struct stge_mii_frame frame;
402 sc = device_get_softc(dev);
404 if (reg == STGE_PhyCtrl) {
405 /* XXX allow ip1000phy read STGE_PhyCtrl register. */
406 error = CSR_READ_1(sc, STGE_PhyCtrl);
409 bzero(&frame, sizeof(frame));
410 frame.mii_phyaddr = phy;
411 frame.mii_regaddr = reg;
413 error = stge_mii_readreg(sc, &frame);
416 /* Don't show errors for PHY probe request */
418 device_printf(sc->sc_dev, "phy read fail\n");
421 return (frame.mii_data);
425 * stge_miibus_writereg: [mii interface function]
427 * Write a PHY register on the MII of the TC9021.
430 stge_miibus_writereg(device_t dev, int phy, int reg, int val)
432 struct stge_softc *sc;
433 struct stge_mii_frame frame;
436 sc = device_get_softc(dev);
438 bzero(&frame, sizeof(frame));
439 frame.mii_phyaddr = phy;
440 frame.mii_regaddr = reg;
441 frame.mii_data = val;
443 error = stge_mii_writereg(sc, &frame);
446 device_printf(sc->sc_dev, "phy write fail\n");
451 * stge_miibus_statchg: [mii interface function]
453 * Callback from MII layer when media changes.
456 stge_miibus_statchg(device_t dev)
458 struct stge_softc *sc;
459 struct mii_data *mii;
461 sc = device_get_softc(dev);
462 mii = device_get_softc(sc->sc_miibus);
464 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)
468 if (((mii->mii_media_active & IFM_GMASK) & IFM_FDX) != 0)
469 sc->sc_MACCtrl |= MC_DuplexSelect;
470 if (((mii->mii_media_active & IFM_GMASK) & IFM_FLAG0) != 0)
471 sc->sc_MACCtrl |= MC_RxFlowControlEnable;
472 if (((mii->mii_media_active & IFM_GMASK) & IFM_FLAG1) != 0)
473 sc->sc_MACCtrl |= MC_TxFlowControlEnable;
479 * stge_mediastatus: [ifmedia interface function]
481 * Get the current interface media status.
484 stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
486 struct stge_softc *sc;
487 struct mii_data *mii;
490 mii = device_get_softc(sc->sc_miibus);
493 ifmr->ifm_status = mii->mii_media_status;
494 ifmr->ifm_active = mii->mii_media_active;
498 * stge_mediachange: [ifmedia interface function]
500 * Set hardware to newly-selected media.
503 stge_mediachange(struct ifnet *ifp)
505 struct stge_softc *sc;
506 struct mii_data *mii;
509 mii = device_get_softc(sc->sc_miibus);
516 stge_eeprom_wait(struct stge_softc *sc)
520 for (i = 0; i < STGE_TIMEOUT; i++) {
522 if ((CSR_READ_2(sc, STGE_EepromCtrl) & EC_EepromBusy) == 0)
531 * Read data from the serial EEPROM.
534 stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data)
537 if (stge_eeprom_wait(sc))
538 device_printf(sc->sc_dev, "EEPROM failed to come ready\n");
540 CSR_WRITE_2(sc, STGE_EepromCtrl,
541 EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR));
542 if (stge_eeprom_wait(sc))
543 device_printf(sc->sc_dev, "EEPROM read timed out\n");
544 *data = CSR_READ_2(sc, STGE_EepromData);
549 stge_probe(device_t dev)
551 struct stge_product *sp;
552 uint16_t vendor, devid;
554 vendor = pci_get_vendor(dev);
555 devid = pci_get_device(dev);
557 for (sp = stge_products; sp->stge_name != NULL; sp++) {
558 if (vendor == sp->stge_vendorid &&
559 devid == sp->stge_deviceid) {
560 device_set_desc(dev, sp->stge_name);
569 stge_attach(device_t dev)
571 struct stge_softc *sc;
573 uint8_t enaddr[ETHER_ADDR_LEN];
579 sc = device_get_softc(dev);
581 ifp = &sc->arpcom.ac_if;
583 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
585 callout_init(&sc->sc_tick_ch);
589 * Handle power management nonsense.
591 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
592 uint32_t iobase, membase, irq;
594 /* Save important PCI config data. */
595 iobase = pci_read_config(dev, STGE_PCIR_LOIO, 4);
596 membase = pci_read_config(dev, STGE_PCIR_LOMEM, 4);
597 irq = pci_read_config(dev, PCIR_INTLINE, 4);
599 /* Reset the power state. */
600 device_printf(dev, "chip is in D%d power mode "
601 "-- setting to D0\n", pci_get_powerstate(dev));
603 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
605 /* Restore PCI config data. */
606 pci_write_config(dev, STGE_PCIR_LOIO, iobase, 4);
607 pci_write_config(dev, STGE_PCIR_LOMEM, membase, 4);
608 pci_write_config(dev, PCIR_INTLINE, irq, 4);
615 pci_enable_busmaster(dev);
616 cmd = pci_read_config(dev, PCIR_COMMAND, 2);
617 val = pci_read_config(dev, STGE_PCIR_LOMEM, 4);
619 if ((val & 0x01) != 0) {
620 sc->sc_res_rid = STGE_PCIR_LOMEM;
621 sc->sc_res_type = SYS_RES_MEMORY;
623 sc->sc_res_rid = STGE_PCIR_LOIO;
624 sc->sc_res_type = SYS_RES_IOPORT;
626 val = pci_read_config(dev, sc->sc_res_rid, 4);
627 if ((val & 0x01) == 0) {
628 device_printf(dev, "couldn't locate IO BAR\n");
633 sc->sc_res = bus_alloc_resource_any(dev, sc->sc_res_type,
634 &sc->sc_res_rid, RF_ACTIVE);
635 if (sc->sc_res == NULL) {
636 device_printf(dev, "couldn't allocate resource\n");
639 sc->sc_btag = rman_get_bustag(sc->sc_res);
640 sc->sc_bhandle = rman_get_bushandle(sc->sc_res);
642 sc->sc_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
644 RF_ACTIVE | RF_SHAREABLE);
645 if (sc->sc_irq == NULL) {
646 device_printf(dev, "couldn't allocate IRQ\n");
651 sc->sc_rev = pci_get_revid(dev);
653 sc->sc_rxint_nframe = STGE_RXINT_NFRAME_DEFAULT;
654 sc->sc_rxint_dmawait = STGE_RXINT_DMAWAIT_DEFAULT;
656 sysctl_ctx_init(&sc->sc_sysctl_ctx);
657 sc->sc_sysctl_tree = SYSCTL_ADD_NODE(&sc->sc_sysctl_ctx,
658 SYSCTL_STATIC_CHILDREN(_hw),
660 device_get_nameunit(dev),
662 if (sc->sc_sysctl_tree == NULL) {
663 device_printf(dev, "can't add sysctl node\n");
668 SYSCTL_ADD_PROC(&sc->sc_sysctl_ctx,
669 SYSCTL_CHILDREN(sc->sc_sysctl_tree), OID_AUTO,
670 "rxint_nframe", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_nframe, 0,
671 sysctl_hw_stge_rxint_nframe, "I", "stge rx interrupt nframe");
673 SYSCTL_ADD_PROC(&sc->sc_sysctl_ctx,
674 SYSCTL_CHILDREN(sc->sc_sysctl_tree), OID_AUTO,
675 "rxint_dmawait", CTLTYPE_INT|CTLFLAG_RW, &sc->sc_rxint_dmawait, 0,
676 sysctl_hw_stge_rxint_dmawait, "I", "stge rx interrupt dmawait");
678 error = stge_dma_alloc(sc);
683 * Determine if we're copper or fiber. It affects how we
686 if (CSR_READ_4(sc, STGE_AsicCtrl) & AC_PhyMedia)
691 /* Load LED configuration from EEPROM. */
692 stge_read_eeprom(sc, STGE_EEPROM_LEDMode, &sc->sc_led);
695 * Reset the chip to a known state.
697 stge_reset(sc, STGE_RESET_FULL);
700 * Reading the station address from the EEPROM doesn't seem
701 * to work, at least on my sample boards. Instead, since
702 * the reset sequence does AutoInit, read it from the station
703 * address registers. For Sundance 1023 you can only read it
706 if (pci_get_device(dev) != DEVICEID_SUNDANCETI_ST1023) {
709 v = CSR_READ_2(sc, STGE_StationAddress0);
710 enaddr[0] = v & 0xff;
712 v = CSR_READ_2(sc, STGE_StationAddress1);
713 enaddr[2] = v & 0xff;
715 v = CSR_READ_2(sc, STGE_StationAddress2);
716 enaddr[4] = v & 0xff;
720 uint16_t myaddr[ETHER_ADDR_LEN / 2];
721 for (i = 0; i <ETHER_ADDR_LEN / 2; i++) {
722 stge_read_eeprom(sc, STGE_EEPROM_StationAddress0 + i,
724 myaddr[i] = le16toh(myaddr[i]);
726 bcopy(myaddr, enaddr, sizeof(enaddr));
731 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
732 ifp->if_ioctl = stge_ioctl;
733 ifp->if_start = stge_start;
734 ifp->if_watchdog = stge_watchdog;
735 ifp->if_init = stge_init;
737 ifp->if_npoll = stge_npoll;
739 ifp->if_mtu = ETHERMTU;
740 ifq_set_maxlen(&ifp->if_snd, STGE_TX_RING_CNT - 1);
741 ifq_set_ready(&ifp->if_snd);
742 /* Revision B3 and earlier chips have checksum bug. */
743 if (sc->sc_rev >= 0x0c) {
744 ifp->if_hwassist = STGE_CSUM_FEATURES;
745 ifp->if_capabilities = IFCAP_HWCSUM;
747 ifp->if_hwassist = 0;
748 ifp->if_capabilities = 0;
750 ifp->if_capenable = ifp->if_capabilities;
753 * Read some important bits from the PhyCtrl register.
755 sc->sc_PhyCtrl = CSR_READ_1(sc, STGE_PhyCtrl) &
756 (PC_PhyDuplexPolarity | PC_PhyLnkPolarity);
758 /* Set up MII bus. */
759 if ((error = mii_phy_probe(sc->sc_dev, &sc->sc_miibus, stge_mediachange,
760 stge_mediastatus)) != 0) {
761 device_printf(sc->sc_dev, "no PHY found!\n");
765 ether_ifattach(ifp, enaddr, NULL);
768 ifpoll_compat_setup(&sc->sc_npoll,
769 &sc->sc_sysctl_ctx, sc->sc_sysctl_tree, device_get_unit(dev),
773 /* VLAN capability setup */
774 ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
776 if (sc->sc_rev >= 0x0c)
777 ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
779 ifp->if_capenable = ifp->if_capabilities;
782 * Tell the upper layer(s) we support long frames.
783 * Must appear after the call to ether_ifattach() because
784 * ether_ifattach() sets ifi_hdrlen to the default value.
786 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
789 * The manual recommends disabling early transmit, so we
790 * do. It's disabled anyway, if using IP checksumming,
791 * since the entire packet must be in the FIFO in order
792 * for the chip to perform the checksum.
794 sc->sc_txthresh = 0x0fff;
797 * Disable MWI if the PCI layer tells us to.
800 if ((cmd & PCIM_CMD_MWRICEN) == 0)
801 sc->sc_DMACtrl |= DMAC_MWIDisable;
803 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->sc_irq));
808 error = bus_setup_intr(dev, sc->sc_irq, INTR_MPSAFE, stge_intr, sc,
809 &sc->sc_ih, ifp->if_serializer);
812 device_printf(sc->sc_dev, "couldn't set up IRQ\n");
824 stge_detach(device_t dev)
826 struct stge_softc *sc = device_get_softc(dev);
827 struct ifnet *ifp = &sc->arpcom.ac_if;
829 if (device_is_attached(dev)) {
830 lwkt_serialize_enter(ifp->if_serializer);
834 bus_teardown_intr(dev, sc->sc_irq, sc->sc_ih);
835 lwkt_serialize_exit(ifp->if_serializer);
840 if (sc->sc_sysctl_tree != NULL)
841 sysctl_ctx_free(&sc->sc_sysctl_ctx);
843 if (sc->sc_miibus != NULL)
844 device_delete_child(dev, sc->sc_miibus);
845 bus_generic_detach(dev);
849 if (sc->sc_irq != NULL) {
850 bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irq_rid,
853 if (sc->sc_res != NULL) {
854 bus_release_resource(dev, sc->sc_res_type, sc->sc_res_rid,
862 stge_dma_alloc(struct stge_softc *sc)
864 struct stge_txdesc *txd;
865 struct stge_rxdesc *rxd;
868 /* create parent tag. */
869 error = bus_dma_tag_create(NULL, /* parent */
870 1, 0, /* algnmnt, boundary */
871 STGE_DMA_MAXADDR, /* lowaddr */
872 BUS_SPACE_MAXADDR, /* highaddr */
873 NULL, NULL, /* filter, filterarg */
874 BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
876 BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
878 &sc->sc_cdata.stge_parent_tag);
880 device_printf(sc->sc_dev, "failed to create parent DMA tag\n");
884 /* allocate Tx ring. */
885 sc->sc_rdata.stge_tx_ring =
886 bus_dmamem_coherent_any(sc->sc_cdata.stge_parent_tag,
887 STGE_RING_ALIGN, STGE_TX_RING_SZ,
888 BUS_DMA_WAITOK | BUS_DMA_ZERO,
889 &sc->sc_cdata.stge_tx_ring_tag,
890 &sc->sc_cdata.stge_tx_ring_map,
891 &sc->sc_rdata.stge_tx_ring_paddr);
892 if (sc->sc_rdata.stge_tx_ring == NULL) {
893 device_printf(sc->sc_dev,
894 "failed to allocate Tx ring\n");
898 /* allocate Rx ring. */
899 sc->sc_rdata.stge_rx_ring =
900 bus_dmamem_coherent_any(sc->sc_cdata.stge_parent_tag,
901 STGE_RING_ALIGN, STGE_RX_RING_SZ,
902 BUS_DMA_WAITOK | BUS_DMA_ZERO,
903 &sc->sc_cdata.stge_rx_ring_tag,
904 &sc->sc_cdata.stge_rx_ring_map,
905 &sc->sc_rdata.stge_rx_ring_paddr);
906 if (sc->sc_rdata.stge_rx_ring == NULL) {
907 device_printf(sc->sc_dev,
908 "failed to allocate Rx ring\n");
912 /* create tag for Tx buffers. */
913 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
914 1, 0, /* algnmnt, boundary */
915 BUS_SPACE_MAXADDR, /* lowaddr */
916 BUS_SPACE_MAXADDR, /* highaddr */
917 NULL, NULL, /* filter, filterarg */
918 STGE_JUMBO_FRAMELEN, /* maxsize */
919 STGE_MAXTXSEGS, /* nsegments */
920 STGE_MAXSGSIZE, /* maxsegsize */
921 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK,/* flags */
922 &sc->sc_cdata.stge_tx_tag);
924 device_printf(sc->sc_dev, "failed to allocate Tx DMA tag\n");
928 /* create DMA maps for Tx buffers. */
929 for (i = 0; i < STGE_TX_RING_CNT; i++) {
930 txd = &sc->sc_cdata.stge_txdesc[i];
931 error = bus_dmamap_create(sc->sc_cdata.stge_tx_tag,
932 BUS_DMA_WAITOK, &txd->tx_dmamap);
936 for (j = 0; j < i; ++j) {
937 txd = &sc->sc_cdata.stge_txdesc[j];
938 bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag,
941 bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag);
942 sc->sc_cdata.stge_tx_tag = NULL;
944 device_printf(sc->sc_dev,
945 "failed to create Tx dmamap\n");
950 /* create tag for Rx buffers. */
951 error = bus_dma_tag_create(sc->sc_cdata.stge_parent_tag,/* parent */
952 1, 0, /* algnmnt, boundary */
953 BUS_SPACE_MAXADDR, /* lowaddr */
954 BUS_SPACE_MAXADDR, /* highaddr */
955 NULL, NULL, /* filter, filterarg */
956 MCLBYTES, /* maxsize */
958 MCLBYTES, /* maxsegsize */
959 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK,/* flags */
960 &sc->sc_cdata.stge_rx_tag);
962 device_printf(sc->sc_dev, "failed to allocate Rx DMA tag\n");
966 /* create DMA maps for Rx buffers. */
967 error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag, BUS_DMA_WAITOK,
968 &sc->sc_cdata.stge_rx_sparemap);
970 device_printf(sc->sc_dev, "failed to create spare Rx dmamap\n");
971 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
972 sc->sc_cdata.stge_rx_tag = NULL;
975 for (i = 0; i < STGE_RX_RING_CNT; i++) {
976 rxd = &sc->sc_cdata.stge_rxdesc[i];
977 error = bus_dmamap_create(sc->sc_cdata.stge_rx_tag,
978 BUS_DMA_WAITOK, &rxd->rx_dmamap);
982 for (j = 0; j < i; ++j) {
983 rxd = &sc->sc_cdata.stge_rxdesc[j];
984 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
987 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
988 sc->sc_cdata.stge_rx_sparemap);
989 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
990 sc->sc_cdata.stge_rx_tag = NULL;
992 device_printf(sc->sc_dev,
993 "failed to create Rx dmamap\n");
1001 stge_dma_free(struct stge_softc *sc)
1003 struct stge_txdesc *txd;
1004 struct stge_rxdesc *rxd;
1008 if (sc->sc_cdata.stge_tx_ring_tag) {
1009 bus_dmamap_unload(sc->sc_cdata.stge_tx_ring_tag,
1010 sc->sc_cdata.stge_tx_ring_map);
1011 bus_dmamem_free(sc->sc_cdata.stge_tx_ring_tag,
1012 sc->sc_rdata.stge_tx_ring,
1013 sc->sc_cdata.stge_tx_ring_map);
1014 bus_dma_tag_destroy(sc->sc_cdata.stge_tx_ring_tag);
1018 if (sc->sc_cdata.stge_rx_ring_tag) {
1019 bus_dmamap_unload(sc->sc_cdata.stge_rx_ring_tag,
1020 sc->sc_cdata.stge_rx_ring_map);
1021 bus_dmamem_free(sc->sc_cdata.stge_rx_ring_tag,
1022 sc->sc_rdata.stge_rx_ring,
1023 sc->sc_cdata.stge_rx_ring_map);
1024 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_ring_tag);
1028 if (sc->sc_cdata.stge_tx_tag) {
1029 for (i = 0; i < STGE_TX_RING_CNT; i++) {
1030 txd = &sc->sc_cdata.stge_txdesc[i];
1031 bus_dmamap_destroy(sc->sc_cdata.stge_tx_tag,
1034 bus_dma_tag_destroy(sc->sc_cdata.stge_tx_tag);
1038 if (sc->sc_cdata.stge_rx_tag) {
1039 for (i = 0; i < STGE_RX_RING_CNT; i++) {
1040 rxd = &sc->sc_cdata.stge_rxdesc[i];
1041 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
1044 bus_dmamap_destroy(sc->sc_cdata.stge_rx_tag,
1045 sc->sc_cdata.stge_rx_sparemap);
1046 bus_dma_tag_destroy(sc->sc_cdata.stge_rx_tag);
1050 if (sc->sc_cdata.stge_parent_tag)
1051 bus_dma_tag_destroy(sc->sc_cdata.stge_parent_tag);
1057 * Make sure the interface is stopped at reboot time.
1060 stge_shutdown(device_t dev)
1062 struct stge_softc *sc = device_get_softc(dev);
1063 struct ifnet *ifp = &sc->arpcom.ac_if;
1065 lwkt_serialize_enter(ifp->if_serializer);
1067 lwkt_serialize_exit(ifp->if_serializer);
1071 stge_suspend(device_t dev)
1073 struct stge_softc *sc = device_get_softc(dev);
1074 struct ifnet *ifp = &sc->arpcom.ac_if;
1076 lwkt_serialize_enter(ifp->if_serializer);
1078 sc->sc_suspended = 1;
1079 lwkt_serialize_exit(ifp->if_serializer);
1085 stge_resume(device_t dev)
1087 struct stge_softc *sc = device_get_softc(dev);
1088 struct ifnet *ifp = &sc->arpcom.ac_if;
1090 lwkt_serialize_enter(ifp->if_serializer);
1091 if (ifp->if_flags & IFF_UP)
1093 sc->sc_suspended = 0;
1094 lwkt_serialize_exit(ifp->if_serializer);
1100 stge_dma_wait(struct stge_softc *sc)
1104 for (i = 0; i < STGE_TIMEOUT; i++) {
1106 if ((CSR_READ_4(sc, STGE_DMACtrl) & DMAC_TxDMAInProg) == 0)
1110 if (i == STGE_TIMEOUT)
1111 device_printf(sc->sc_dev, "DMA wait timed out\n");
1115 stge_encap(struct stge_softc *sc, struct mbuf **m_head)
1117 struct stge_txdesc *txd;
1118 struct stge_tfd *tfd;
1120 bus_dma_segment_t txsegs[STGE_MAXTXSEGS];
1121 int error, i, si, nsegs;
1122 uint64_t csum_flags, tfc;
1124 txd = STAILQ_FIRST(&sc->sc_cdata.stge_txfreeq);
1125 KKASSERT(txd != NULL);
1127 error = bus_dmamap_load_mbuf_defrag(sc->sc_cdata.stge_tx_tag,
1128 txd->tx_dmamap, m_head,
1129 txsegs, STGE_MAXTXSEGS, &nsegs, BUS_DMA_NOWAIT);
1135 bus_dmamap_sync(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap,
1136 BUS_DMASYNC_PREWRITE);
1141 if ((m->m_pkthdr.csum_flags & STGE_CSUM_FEATURES) != 0) {
1142 if (m->m_pkthdr.csum_flags & CSUM_IP)
1143 csum_flags |= TFD_IPChecksumEnable;
1144 if (m->m_pkthdr.csum_flags & CSUM_TCP)
1145 csum_flags |= TFD_TCPChecksumEnable;
1146 else if (m->m_pkthdr.csum_flags & CSUM_UDP)
1147 csum_flags |= TFD_UDPChecksumEnable;
1150 si = sc->sc_cdata.stge_tx_prod;
1151 tfd = &sc->sc_rdata.stge_tx_ring[si];
1152 for (i = 0; i < nsegs; i++) {
1153 tfd->tfd_frags[i].frag_word0 =
1154 htole64(FRAG_ADDR(txsegs[i].ds_addr) |
1155 FRAG_LEN(txsegs[i].ds_len));
1157 sc->sc_cdata.stge_tx_cnt++;
1159 tfc = TFD_FrameId(si) | TFD_WordAlign(TFD_WordAlign_disable) |
1160 TFD_FragCount(nsegs) | csum_flags;
1161 if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT)
1162 tfc |= TFD_TxDMAIndicate;
1164 /* Update producer index. */
1165 sc->sc_cdata.stge_tx_prod = (si + 1) % STGE_TX_RING_CNT;
1167 /* Check if we have a VLAN tag to insert. */
1168 if (m->m_flags & M_VLANTAG)
1169 tfc |= TFD_VLANTagInsert | TFD_VID(m->m_pkthdr.ether_vlantag);
1170 tfd->tfd_control = htole64(tfc);
1172 /* Update Tx Queue. */
1173 STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txfreeq, tx_q);
1174 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txbusyq, txd, tx_q);
1181 * stge_start: [ifnet interface function]
1183 * Start packet transmission on the interface.
1186 stge_start(struct ifnet *ifp, struct ifaltq_subque *ifsq)
1188 struct stge_softc *sc;
1189 struct mbuf *m_head;
1194 ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq);
1195 ASSERT_SERIALIZED(ifp->if_serializer);
1197 if ((ifp->if_flags & IFF_RUNNING) == 0 || ifq_is_oactive(&ifp->if_snd))
1201 while (!ifq_is_empty(&ifp->if_snd)) {
1202 if (sc->sc_cdata.stge_tx_cnt >= STGE_TX_HIWAT) {
1203 ifq_set_oactive(&ifp->if_snd);
1207 m_head = ifq_dequeue(&ifp->if_snd, NULL);
1212 * Pack the data into the transmit ring. If we
1213 * don't have room, set the OACTIVE flag and wait
1214 * for the NIC to drain the ring.
1216 if (stge_encap(sc, &m_head)) {
1217 if (sc->sc_cdata.stge_tx_cnt == 0) {
1220 ifq_set_oactive(&ifp->if_snd);
1227 * If there's a BPF listener, bounce a copy of this frame
1230 ETHER_BPF_MTAP(ifp, m_head);
1235 CSR_WRITE_4(sc, STGE_DMACtrl, DMAC_TxDMAPollNow);
1237 /* Set a timeout in case the chip goes out to lunch. */
1243 * stge_watchdog: [ifnet interface function]
1245 * Watchdog timer handler.
1248 stge_watchdog(struct ifnet *ifp)
1250 ASSERT_SERIALIZED(ifp->if_serializer);
1252 if_printf(ifp, "device timeout\n");
1253 IFNET_STAT_INC(ifp, oerrors, 1);
1254 stge_init(ifp->if_softc);
1258 * stge_ioctl: [ifnet interface function]
1260 * Handle control requests from the operator.
1263 stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data, struct ucred *cr)
1265 struct stge_softc *sc;
1267 struct mii_data *mii;
1270 ASSERT_SERIALIZED(ifp->if_serializer);
1273 ifr = (struct ifreq *)data;
1277 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > STGE_JUMBO_MTU)
1279 else if (ifp->if_mtu != ifr->ifr_mtu) {
1280 ifp->if_mtu = ifr->ifr_mtu;
1285 if ((ifp->if_flags & IFF_UP) != 0) {
1286 if ((ifp->if_flags & IFF_RUNNING) != 0) {
1287 if (((ifp->if_flags ^ sc->sc_if_flags)
1288 & IFF_PROMISC) != 0)
1289 stge_set_filter(sc);
1291 if (sc->sc_detach == 0)
1295 if ((ifp->if_flags & IFF_RUNNING) != 0)
1298 sc->sc_if_flags = ifp->if_flags;
1302 if ((ifp->if_flags & IFF_RUNNING) != 0)
1307 mii = device_get_softc(sc->sc_miibus);
1308 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
1311 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
1312 if ((mask & IFCAP_HWCSUM) != 0) {
1313 ifp->if_capenable ^= IFCAP_HWCSUM;
1314 if ((IFCAP_HWCSUM & ifp->if_capenable) != 0 &&
1315 (IFCAP_HWCSUM & ifp->if_capabilities) != 0)
1316 ifp->if_hwassist = STGE_CSUM_FEATURES;
1318 ifp->if_hwassist = 0;
1320 if ((mask & IFCAP_VLAN_HWTAGGING) != 0) {
1321 ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
1322 if (ifp->if_flags & IFF_RUNNING)
1323 stge_vlan_setup(sc);
1326 VLAN_CAPABILITIES(ifp);
1330 error = ether_ioctl(ifp, cmd, data);
1338 stge_link(struct stge_softc *sc)
1344 * Update STGE_MACCtrl register depending on link status.
1345 * (duplex, flow control etc)
1347 v = ac = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
1348 v &= ~(MC_DuplexSelect|MC_RxFlowControlEnable|MC_TxFlowControlEnable);
1349 v |= sc->sc_MACCtrl;
1350 CSR_WRITE_4(sc, STGE_MACCtrl, v);
1351 if (((ac ^ sc->sc_MACCtrl) & MC_DuplexSelect) != 0) {
1352 /* Duplex setting changed, reset Tx/Rx functions. */
1353 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1354 ac |= AC_TxReset | AC_RxReset;
1355 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1356 for (i = 0; i < STGE_TIMEOUT; i++) {
1358 if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
1361 if (i == STGE_TIMEOUT)
1362 device_printf(sc->sc_dev, "reset failed to complete\n");
1367 stge_tx_error(struct stge_softc *sc)
1373 txstat = CSR_READ_4(sc, STGE_TxStatus);
1374 if ((txstat & TS_TxComplete) == 0)
1377 if ((txstat & TS_TxUnderrun) != 0) {
1380 * There should be a more better way to recover
1381 * from Tx underrun instead of a full reset.
1383 if (sc->sc_nerr++ < STGE_MAXERR)
1384 device_printf(sc->sc_dev, "Tx underrun, "
1386 if (sc->sc_nerr == STGE_MAXERR)
1387 device_printf(sc->sc_dev, "too many errors; "
1388 "not reporting any more\n");
1392 /* Maximum/Late collisions, Re-enable Tx MAC. */
1393 if ((txstat & (TS_MaxCollisions|TS_LateCollision)) != 0)
1394 CSR_WRITE_4(sc, STGE_MACCtrl,
1395 (CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK) |
1405 * Interrupt service routine.
1408 stge_intr(void *arg)
1410 struct stge_softc *sc = arg;
1411 struct ifnet *ifp = &sc->arpcom.ac_if;
1415 ASSERT_SERIALIZED(ifp->if_serializer);
1417 status = CSR_READ_2(sc, STGE_IntStatus);
1418 if (sc->sc_suspended || (status & IS_InterruptStatus) == 0)
1421 /* Disable interrupts. */
1422 for (reinit = 0;;) {
1423 status = CSR_READ_2(sc, STGE_IntStatusAck);
1424 status &= sc->sc_IntEnable;
1427 /* Host interface errors. */
1428 if ((status & IS_HostError) != 0) {
1429 device_printf(sc->sc_dev,
1430 "Host interface error, resetting...\n");
1435 /* Receive interrupts. */
1436 if ((status & IS_RxDMAComplete) != 0) {
1438 if ((status & IS_RFDListEnd) != 0)
1439 CSR_WRITE_4(sc, STGE_DMACtrl,
1443 /* Transmit interrupts. */
1444 if ((status & (IS_TxDMAComplete | IS_TxComplete)) != 0)
1447 /* Transmission errors.*/
1448 if ((status & IS_TxComplete) != 0) {
1449 if ((reinit = stge_tx_error(sc)) != 0)
1458 /* Re-enable interrupts. */
1459 CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
1461 /* Try to get more packets going. */
1462 if (!ifq_is_empty(&ifp->if_snd))
1469 * Helper; handle transmit interrupts.
1472 stge_txeof(struct stge_softc *sc)
1474 struct ifnet *ifp = &sc->arpcom.ac_if;
1475 struct stge_txdesc *txd;
1479 txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
1484 * Go through our Tx list and free mbufs for those
1485 * frames which have been transmitted.
1487 for (cons = sc->sc_cdata.stge_tx_cons;;
1488 cons = (cons + 1) % STGE_TX_RING_CNT) {
1489 if (sc->sc_cdata.stge_tx_cnt <= 0)
1491 control = le64toh(sc->sc_rdata.stge_tx_ring[cons].tfd_control);
1492 if ((control & TFD_TFDDone) == 0)
1494 sc->sc_cdata.stge_tx_cnt--;
1496 bus_dmamap_unload(sc->sc_cdata.stge_tx_tag, txd->tx_dmamap);
1498 /* Output counter is updated with statistics register */
1501 STAILQ_REMOVE_HEAD(&sc->sc_cdata.stge_txbusyq, tx_q);
1502 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
1503 txd = STAILQ_FIRST(&sc->sc_cdata.stge_txbusyq);
1505 sc->sc_cdata.stge_tx_cons = cons;
1507 if (sc->sc_cdata.stge_tx_cnt < STGE_TX_HIWAT)
1508 ifq_clr_oactive(&ifp->if_snd);
1509 if (sc->sc_cdata.stge_tx_cnt == 0)
1513 static __inline void
1514 stge_discard_rxbuf(struct stge_softc *sc, int idx)
1516 struct stge_rfd *rfd;
1518 rfd = &sc->sc_rdata.stge_rx_ring[idx];
1519 rfd->rfd_status = 0;
1524 * It seems that TC9021's DMA engine has alignment restrictions in
1525 * DMA scatter operations. The first DMA segment has no address
1526 * alignment restrictins but the rest should be aligned on 4(?) bytes
1527 * boundary. Otherwise it would corrupt random memory. Since we don't
1528 * know which one is used for the first segment in advance we simply
1529 * don't align at all.
1530 * To avoid copying over an entire frame to align, we allocate a new
1531 * mbuf and copy ethernet header to the new mbuf. The new mbuf is
1532 * prepended into the existing mbuf chain.
1534 static __inline struct mbuf *
1535 stge_fixup_rx(struct stge_softc *sc, struct mbuf *m)
1540 if (m->m_len <= (MCLBYTES - ETHER_HDR_LEN)) {
1541 bcopy(m->m_data, m->m_data + ETHER_HDR_LEN, m->m_len);
1542 m->m_data += ETHER_HDR_LEN;
1545 MGETHDR(n, MB_DONTWAIT, MT_DATA);
1547 bcopy(m->m_data, n->m_data, ETHER_HDR_LEN);
1548 m->m_data += ETHER_HDR_LEN;
1549 m->m_len -= ETHER_HDR_LEN;
1550 n->m_len = ETHER_HDR_LEN;
1551 M_MOVE_PKTHDR(n, m);
1564 * Helper; handle receive interrupts.
1567 stge_rxeof(struct stge_softc *sc, int count)
1569 struct ifnet *ifp = &sc->arpcom.ac_if;
1570 struct stge_rxdesc *rxd;
1571 struct mbuf *mp, *m;
1577 for (cons = sc->sc_cdata.stge_rx_cons; prog < STGE_RX_RING_CNT;
1578 prog++, cons = (cons + 1) % STGE_RX_RING_CNT) {
1579 #ifdef IFPOLL_ENABLE
1580 if (count >= 0 && count-- == 0)
1584 status64 = le64toh(sc->sc_rdata.stge_rx_ring[cons].rfd_status);
1585 status = RFD_RxStatus(status64);
1586 if ((status & RFD_RFDDone) == 0)
1590 rxd = &sc->sc_cdata.stge_rxdesc[cons];
1594 * If the packet had an error, drop it. Note we count
1595 * the error later in the periodic stats update.
1597 if ((status & RFD_FrameEnd) != 0 && (status &
1598 (RFD_RxFIFOOverrun | RFD_RxRuntFrame |
1599 RFD_RxAlignmentError | RFD_RxFCSError |
1600 RFD_RxLengthError)) != 0) {
1601 stge_discard_rxbuf(sc, cons);
1602 if (sc->sc_cdata.stge_rxhead != NULL) {
1603 m_freem(sc->sc_cdata.stge_rxhead);
1604 STGE_RXCHAIN_RESET(sc);
1609 * Add a new receive buffer to the ring.
1611 if (stge_newbuf(sc, cons, 0) != 0) {
1612 IFNET_STAT_INC(ifp, iqdrops, 1);
1613 stge_discard_rxbuf(sc, cons);
1614 if (sc->sc_cdata.stge_rxhead != NULL) {
1615 m_freem(sc->sc_cdata.stge_rxhead);
1616 STGE_RXCHAIN_RESET(sc);
1621 if ((status & RFD_FrameEnd) != 0)
1622 mp->m_len = RFD_RxDMAFrameLen(status) -
1623 sc->sc_cdata.stge_rxlen;
1624 sc->sc_cdata.stge_rxlen += mp->m_len;
1627 if (sc->sc_cdata.stge_rxhead == NULL) {
1628 sc->sc_cdata.stge_rxhead = mp;
1629 sc->sc_cdata.stge_rxtail = mp;
1631 mp->m_flags &= ~M_PKTHDR;
1632 sc->sc_cdata.stge_rxtail->m_next = mp;
1633 sc->sc_cdata.stge_rxtail = mp;
1636 if ((status & RFD_FrameEnd) != 0) {
1637 m = sc->sc_cdata.stge_rxhead;
1638 m->m_pkthdr.rcvif = ifp;
1639 m->m_pkthdr.len = sc->sc_cdata.stge_rxlen;
1641 if (m->m_pkthdr.len > sc->sc_if_framesize) {
1643 STGE_RXCHAIN_RESET(sc);
1647 * Set the incoming checksum information for
1650 if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) {
1651 if ((status & RFD_IPDetected) != 0) {
1652 m->m_pkthdr.csum_flags |=
1654 if ((status & RFD_IPError) == 0)
1655 m->m_pkthdr.csum_flags |=
1658 if (((status & RFD_TCPDetected) != 0 &&
1659 (status & RFD_TCPError) == 0) ||
1660 ((status & RFD_UDPDetected) != 0 &&
1661 (status & RFD_UDPError) == 0)) {
1662 m->m_pkthdr.csum_flags |=
1665 CSUM_FRAG_NOT_CHECKED);
1666 m->m_pkthdr.csum_data = 0xffff;
1671 if (sc->sc_if_framesize > (MCLBYTES - ETHER_ALIGN)) {
1672 if ((m = stge_fixup_rx(sc, m)) == NULL) {
1673 STGE_RXCHAIN_RESET(sc);
1679 /* Check for VLAN tagged packets. */
1680 if ((status & RFD_VLANDetected) != 0 &&
1681 (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) {
1682 m->m_flags |= M_VLANTAG;
1683 m->m_pkthdr.ether_vlantag = RFD_TCI(status64);
1686 ifp->if_input(ifp, m);
1688 STGE_RXCHAIN_RESET(sc);
1693 /* Update the consumer index. */
1694 sc->sc_cdata.stge_rx_cons = cons;
1698 #ifdef IFPOLL_ENABLE
1701 stge_npoll_compat(struct ifnet *ifp, void *arg __unused, int count)
1703 struct stge_softc *sc = ifp->if_softc;
1705 ASSERT_SERIALIZED(ifp->if_serializer);
1707 if (sc->sc_npoll.ifpc_stcount-- == 0) {
1710 sc->sc_npoll.ifpc_stcount = sc->sc_npoll.ifpc_stfrac;
1712 status = CSR_READ_2(sc, STGE_IntStatus);
1713 status &= sc->sc_IntEnable;
1715 if (status & IS_HostError) {
1716 device_printf(sc->sc_dev,
1717 "Host interface error, "
1721 if ((status & IS_TxComplete) != 0 &&
1722 stge_tx_error(sc) != 0)
1727 stge_rxeof(sc, count);
1730 if (!ifq_is_empty(&ifp->if_snd))
1735 stge_npoll(struct ifnet *ifp, struct ifpoll_info *info)
1737 struct stge_softc *sc = ifp->if_softc;
1739 ASSERT_SERIALIZED(ifp->if_serializer);
1742 int cpuid = sc->sc_npoll.ifpc_cpuid;
1744 info->ifpi_rx[cpuid].poll_func = stge_npoll_compat;
1745 info->ifpi_rx[cpuid].arg = NULL;
1746 info->ifpi_rx[cpuid].serializer = ifp->if_serializer;
1748 if (ifp->if_flags & IFF_RUNNING) {
1749 CSR_WRITE_2(sc, STGE_IntEnable, 0);
1750 sc->sc_npoll.ifpc_stcount = 0;
1752 ifq_set_cpuid(&ifp->if_snd, cpuid);
1754 if (ifp->if_flags & IFF_RUNNING)
1755 CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
1756 ifq_set_cpuid(&ifp->if_snd, rman_get_cpuid(sc->sc_irq));
1760 #endif /* IFPOLL_ENABLE */
1765 * One second timer, used to tick the MII.
1768 stge_tick(void *arg)
1770 struct stge_softc *sc = arg;
1771 struct ifnet *ifp = &sc->arpcom.ac_if;
1772 struct mii_data *mii;
1774 lwkt_serialize_enter(ifp->if_serializer);
1776 mii = device_get_softc(sc->sc_miibus);
1779 /* Update statistics counters. */
1780 stge_stats_update(sc);
1783 * Relcaim any pending Tx descriptors to release mbufs in a
1784 * timely manner as we don't generate Tx completion interrupts
1785 * for every frame. This limits the delay to a maximum of one
1788 if (sc->sc_cdata.stge_tx_cnt != 0)
1791 callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
1793 lwkt_serialize_exit(ifp->if_serializer);
1797 * stge_stats_update:
1799 * Read the TC9021 statistics counters.
1802 stge_stats_update(struct stge_softc *sc)
1804 struct ifnet *ifp = &sc->arpcom.ac_if;
1806 CSR_READ_4(sc,STGE_OctetRcvOk);
1808 IFNET_STAT_INC(ifp, ipackets, CSR_READ_4(sc, STGE_FramesRcvdOk));
1810 IFNET_STAT_INC(ifp, ierrors, CSR_READ_2(sc, STGE_FramesLostRxErrors));
1812 CSR_READ_4(sc, STGE_OctetXmtdOk);
1814 IFNET_STAT_INC(ifp, opackets, CSR_READ_4(sc, STGE_FramesXmtdOk));
1816 IFNET_STAT_INC(ifp, collisions,
1817 CSR_READ_4(sc, STGE_LateCollisions) +
1818 CSR_READ_4(sc, STGE_MultiColFrames) +
1819 CSR_READ_4(sc, STGE_SingleColFrames));
1821 IFNET_STAT_INC(ifp, oerrors,
1822 CSR_READ_2(sc, STGE_FramesAbortXSColls) +
1823 CSR_READ_2(sc, STGE_FramesWEXDeferal));
1829 * Perform a soft reset on the TC9021.
1832 stge_reset(struct stge_softc *sc, uint32_t how)
1839 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1842 ac |= AC_TxReset | AC_FIFO;
1846 ac |= AC_RxReset | AC_FIFO;
1849 case STGE_RESET_FULL:
1852 * Only assert RstOut if we're fiber. We need GMII clocks
1853 * to be present in order for the reset to complete on fiber
1856 ac |= AC_GlobalReset | AC_RxReset | AC_TxReset |
1857 AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit |
1858 (sc->sc_usefiber ? AC_RstOut : 0);
1862 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1864 /* Account for reset problem at 10Mbps. */
1867 for (i = 0; i < STGE_TIMEOUT; i++) {
1868 if ((CSR_READ_4(sc, STGE_AsicCtrl) & AC_ResetBusy) == 0)
1873 if (i == STGE_TIMEOUT)
1874 device_printf(sc->sc_dev, "reset failed to complete\n");
1876 /* Set LED, from Linux IPG driver. */
1877 ac = CSR_READ_4(sc, STGE_AsicCtrl);
1878 ac &= ~(AC_LEDMode | AC_LEDSpeed | AC_LEDModeBit1);
1879 if ((sc->sc_led & 0x01) != 0)
1881 if ((sc->sc_led & 0x03) != 0)
1882 ac |= AC_LEDModeBit1;
1883 if ((sc->sc_led & 0x08) != 0)
1885 CSR_WRITE_4(sc, STGE_AsicCtrl, ac);
1887 /* Set PHY, from Linux IPG driver */
1888 v = CSR_READ_1(sc, STGE_PhySet);
1889 v &= ~(PS_MemLenb9b | PS_MemLen | PS_NonCompdet);
1890 v |= ((sc->sc_led & 0x70) >> 4);
1891 CSR_WRITE_1(sc, STGE_PhySet, v);
1895 * stge_init: [ ifnet interface function ]
1897 * Initialize the interface.
1900 stge_init(void *xsc)
1902 struct stge_softc *sc = xsc;
1903 struct ifnet *ifp = &sc->arpcom.ac_if;
1904 struct mii_data *mii;
1909 ASSERT_SERIALIZED(ifp->if_serializer);
1911 mii = device_get_softc(sc->sc_miibus);
1914 * Cancel any pending I/O.
1918 /* Init descriptors. */
1919 error = stge_init_rx_ring(sc);
1921 device_printf(sc->sc_dev,
1922 "initialization failed: no memory for rx buffers\n");
1926 stge_init_tx_ring(sc);
1928 /* Set the station address. */
1929 bcopy(IF_LLADDR(ifp), eaddr, ETHER_ADDR_LEN);
1930 CSR_WRITE_2(sc, STGE_StationAddress0, htole16(eaddr[0]));
1931 CSR_WRITE_2(sc, STGE_StationAddress1, htole16(eaddr[1]));
1932 CSR_WRITE_2(sc, STGE_StationAddress2, htole16(eaddr[2]));
1935 * Set the statistics masks. Disable all the RMON stats,
1936 * and disable selected stats in the non-RMON stats registers.
1938 CSR_WRITE_4(sc, STGE_RMONStatisticsMask, 0xffffffff);
1939 CSR_WRITE_4(sc, STGE_StatisticsMask,
1940 (1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) |
1941 (1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) |
1942 (1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) |
1945 /* Set up the receive filter. */
1946 stge_set_filter(sc);
1947 /* Program multicast filter. */
1951 * Give the transmit and receive ring to the chip.
1953 CSR_WRITE_4(sc, STGE_TFDListPtrHi,
1954 STGE_ADDR_HI(STGE_TX_RING_ADDR(sc, 0)));
1955 CSR_WRITE_4(sc, STGE_TFDListPtrLo,
1956 STGE_ADDR_LO(STGE_TX_RING_ADDR(sc, 0)));
1958 CSR_WRITE_4(sc, STGE_RFDListPtrHi,
1959 STGE_ADDR_HI(STGE_RX_RING_ADDR(sc, 0)));
1960 CSR_WRITE_4(sc, STGE_RFDListPtrLo,
1961 STGE_ADDR_LO(STGE_RX_RING_ADDR(sc, 0)));
1964 * Initialize the Tx auto-poll period. It's OK to make this number
1965 * large (255 is the max, but we use 127) -- we explicitly kick the
1966 * transmit engine when there's actually a packet.
1968 CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
1970 /* ..and the Rx auto-poll period. */
1971 CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
1973 /* Initialize the Tx start threshold. */
1974 CSR_WRITE_2(sc, STGE_TxStartThresh, sc->sc_txthresh);
1976 /* Rx DMA thresholds, from Linux */
1977 CSR_WRITE_1(sc, STGE_RxDMABurstThresh, 0x30);
1978 CSR_WRITE_1(sc, STGE_RxDMAUrgentThresh, 0x30);
1980 /* Rx early threhold, from Linux */
1981 CSR_WRITE_2(sc, STGE_RxEarlyThresh, 0x7ff);
1983 /* Tx DMA thresholds, from Linux */
1984 CSR_WRITE_1(sc, STGE_TxDMABurstThresh, 0x30);
1985 CSR_WRITE_1(sc, STGE_TxDMAUrgentThresh, 0x04);
1988 * Initialize the Rx DMA interrupt control register. We
1989 * request an interrupt after every incoming packet, but
1990 * defer it for sc_rxint_dmawait us. When the number of
1991 * interrupts pending reaches STGE_RXINT_NFRAME, we stop
1992 * deferring the interrupt, and signal it immediately.
1994 CSR_WRITE_4(sc, STGE_RxDMAIntCtrl,
1995 RDIC_RxFrameCount(sc->sc_rxint_nframe) |
1996 RDIC_RxDMAWaitTime(STGE_RXINT_USECS2TICK(sc->sc_rxint_dmawait)));
1999 * Initialize the interrupt mask.
2001 sc->sc_IntEnable = IS_HostError | IS_TxComplete |
2002 IS_TxDMAComplete | IS_RxDMAComplete | IS_RFDListEnd;
2003 #ifdef IFPOLL_ENABLE
2004 /* Disable interrupts if we are polling. */
2005 if (ifp->if_flags & IFF_NPOLLING) {
2006 CSR_WRITE_2(sc, STGE_IntEnable, 0);
2007 sc->sc_npoll.ifpc_stcount = 0;
2010 CSR_WRITE_2(sc, STGE_IntEnable, sc->sc_IntEnable);
2013 * Configure the DMA engine.
2014 * XXX Should auto-tune TxBurstLimit.
2016 CSR_WRITE_4(sc, STGE_DMACtrl, sc->sc_DMACtrl | DMAC_TxBurstLimit(3));
2019 * Send a PAUSE frame when we reach 29,696 bytes in the Rx
2020 * FIFO, and send an un-PAUSE frame when we reach 3056 bytes
2023 CSR_WRITE_2(sc, STGE_FlowOnTresh, 29696 / 16);
2024 CSR_WRITE_2(sc, STGE_FlowOffThresh, 3056 / 16);
2027 * Set the maximum frame size.
2029 sc->sc_if_framesize = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
2030 CSR_WRITE_2(sc, STGE_MaxFrameSize, sc->sc_if_framesize);
2033 * Initialize MacCtrl -- do it before setting the media,
2034 * as setting the media will actually program the register.
2036 * Note: We have to poke the IFS value before poking
2039 /* Tx/Rx MAC should be disabled before programming IFS.*/
2040 CSR_WRITE_4(sc, STGE_MACCtrl, MC_IFSSelect(MC_IFS96bit));
2042 stge_vlan_setup(sc);
2044 if (sc->sc_rev >= 6) { /* >= B.2 */
2045 /* Multi-frag frame bug work-around. */
2046 CSR_WRITE_2(sc, STGE_DebugCtrl,
2047 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0200);
2049 /* Tx Poll Now bug work-around. */
2050 CSR_WRITE_2(sc, STGE_DebugCtrl,
2051 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0010);
2052 /* Tx Poll Now bug work-around. */
2053 CSR_WRITE_2(sc, STGE_DebugCtrl,
2054 CSR_READ_2(sc, STGE_DebugCtrl) | 0x0020);
2057 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2058 v |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable;
2059 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2061 * It seems that transmitting frames without checking the state of
2062 * Rx/Tx MAC wedge the hardware.
2068 * Set the current media.
2073 * Start the one second MII clock.
2075 callout_reset(&sc->sc_tick_ch, hz, stge_tick, sc);
2080 ifp->if_flags |= IFF_RUNNING;
2081 ifq_clr_oactive(&ifp->if_snd);
2085 device_printf(sc->sc_dev, "interface not running\n");
2089 stge_vlan_setup(struct stge_softc *sc)
2091 struct ifnet *ifp = &sc->arpcom.ac_if;
2095 * The NIC always copy a VLAN tag regardless of STGE_MACCtrl
2096 * MC_AutoVLANuntagging bit.
2097 * MC_AutoVLANtagging bit selects which VLAN source to use
2098 * between STGE_VLANTag and TFC. However TFC TFD_VLANTagInsert
2099 * bit has priority over MC_AutoVLANtagging bit. So we always
2100 * use TFC instead of STGE_VLANTag register.
2102 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2103 if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
2104 v |= MC_AutoVLANuntagging;
2106 v &= ~MC_AutoVLANuntagging;
2107 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2111 * Stop transmission on the interface.
2114 stge_stop(struct stge_softc *sc)
2116 struct ifnet *ifp = &sc->arpcom.ac_if;
2117 struct stge_txdesc *txd;
2118 struct stge_rxdesc *rxd;
2122 ASSERT_SERIALIZED(ifp->if_serializer);
2125 * Stop the one second clock.
2127 callout_stop(&sc->sc_tick_ch);
2130 * Reset the chip to a known state.
2132 stge_reset(sc, STGE_RESET_FULL);
2135 * Disable interrupts.
2137 CSR_WRITE_2(sc, STGE_IntEnable, 0);
2140 * Stop receiver, transmitter, and stats update.
2144 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2145 v |= MC_StatisticsDisable;
2146 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2149 * Stop the transmit and receive DMA.
2152 CSR_WRITE_4(sc, STGE_TFDListPtrHi, 0);
2153 CSR_WRITE_4(sc, STGE_TFDListPtrLo, 0);
2154 CSR_WRITE_4(sc, STGE_RFDListPtrHi, 0);
2155 CSR_WRITE_4(sc, STGE_RFDListPtrLo, 0);
2158 * Free RX and TX mbufs still in the queues.
2160 for (i = 0; i < STGE_RX_RING_CNT; i++) {
2161 rxd = &sc->sc_cdata.stge_rxdesc[i];
2162 if (rxd->rx_m != NULL) {
2163 bus_dmamap_unload(sc->sc_cdata.stge_rx_tag,
2169 for (i = 0; i < STGE_TX_RING_CNT; i++) {
2170 txd = &sc->sc_cdata.stge_txdesc[i];
2171 if (txd->tx_m != NULL) {
2172 bus_dmamap_unload(sc->sc_cdata.stge_tx_tag,
2180 * Mark the interface down and cancel the watchdog timer.
2182 ifp->if_flags &= ~IFF_RUNNING;
2183 ifq_clr_oactive(&ifp->if_snd);
2188 stge_start_tx(struct stge_softc *sc)
2193 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2194 if ((v & MC_TxEnabled) != 0)
2197 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2198 CSR_WRITE_1(sc, STGE_TxDMAPollPeriod, 127);
2199 for (i = STGE_TIMEOUT; i > 0; i--) {
2201 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2202 if ((v & MC_TxEnabled) != 0)
2206 device_printf(sc->sc_dev, "Starting Tx MAC timed out\n");
2210 stge_start_rx(struct stge_softc *sc)
2215 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2216 if ((v & MC_RxEnabled) != 0)
2219 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2220 CSR_WRITE_1(sc, STGE_RxDMAPollPeriod, 1);
2221 for (i = STGE_TIMEOUT; i > 0; i--) {
2223 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2224 if ((v & MC_RxEnabled) != 0)
2228 device_printf(sc->sc_dev, "Starting Rx MAC timed out\n");
2232 stge_stop_tx(struct stge_softc *sc)
2237 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2238 if ((v & MC_TxEnabled) == 0)
2241 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2242 for (i = STGE_TIMEOUT; i > 0; i--) {
2244 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2245 if ((v & MC_TxEnabled) == 0)
2249 device_printf(sc->sc_dev, "Stopping Tx MAC timed out\n");
2253 stge_stop_rx(struct stge_softc *sc)
2258 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2259 if ((v & MC_RxEnabled) == 0)
2262 CSR_WRITE_4(sc, STGE_MACCtrl, v);
2263 for (i = STGE_TIMEOUT; i > 0; i--) {
2265 v = CSR_READ_4(sc, STGE_MACCtrl) & MC_MASK;
2266 if ((v & MC_RxEnabled) == 0)
2270 device_printf(sc->sc_dev, "Stopping Rx MAC timed out\n");
2274 stge_init_tx_ring(struct stge_softc *sc)
2276 struct stge_ring_data *rd;
2277 struct stge_txdesc *txd;
2281 STAILQ_INIT(&sc->sc_cdata.stge_txfreeq);
2282 STAILQ_INIT(&sc->sc_cdata.stge_txbusyq);
2284 sc->sc_cdata.stge_tx_prod = 0;
2285 sc->sc_cdata.stge_tx_cons = 0;
2286 sc->sc_cdata.stge_tx_cnt = 0;
2289 bzero(rd->stge_tx_ring, STGE_TX_RING_SZ);
2290 for (i = 0; i < STGE_TX_RING_CNT; i++) {
2291 if (i == (STGE_TX_RING_CNT - 1))
2292 addr = STGE_TX_RING_ADDR(sc, 0);
2294 addr = STGE_TX_RING_ADDR(sc, i + 1);
2295 rd->stge_tx_ring[i].tfd_next = htole64(addr);
2296 rd->stge_tx_ring[i].tfd_control = htole64(TFD_TFDDone);
2297 txd = &sc->sc_cdata.stge_txdesc[i];
2298 STAILQ_INSERT_TAIL(&sc->sc_cdata.stge_txfreeq, txd, tx_q);
2303 stge_init_rx_ring(struct stge_softc *sc)
2305 struct stge_ring_data *rd;
2309 sc->sc_cdata.stge_rx_cons = 0;
2310 STGE_RXCHAIN_RESET(sc);
2313 bzero(rd->stge_rx_ring, STGE_RX_RING_SZ);
2314 for (i = 0; i < STGE_RX_RING_CNT; i++) {
2315 if (stge_newbuf(sc, i, 1) != 0)
2317 if (i == (STGE_RX_RING_CNT - 1))
2318 addr = STGE_RX_RING_ADDR(sc, 0);
2320 addr = STGE_RX_RING_ADDR(sc, i + 1);
2321 rd->stge_rx_ring[i].rfd_next = htole64(addr);
2322 rd->stge_rx_ring[i].rfd_status = 0;
2330 * Add a receive buffer to the indicated descriptor.
2333 stge_newbuf(struct stge_softc *sc, int idx, int waitok)
2335 struct stge_rxdesc *rxd;
2336 struct stge_rfd *rfd;
2338 bus_dma_segment_t seg;
2342 m = m_getcl(waitok ? MB_WAIT : MB_DONTWAIT, MT_DATA, M_PKTHDR);
2345 m->m_len = m->m_pkthdr.len = MCLBYTES;
2348 * The hardware requires 4bytes aligned DMA address when JUMBO
2351 if (sc->sc_if_framesize <= (MCLBYTES - ETHER_ALIGN))
2352 m_adj(m, ETHER_ALIGN);
2354 error = bus_dmamap_load_mbuf_segment(sc->sc_cdata.stge_rx_tag,
2355 sc->sc_cdata.stge_rx_sparemap, m,
2356 &seg, 1, &nseg, BUS_DMA_NOWAIT);
2362 rxd = &sc->sc_cdata.stge_rxdesc[idx];
2363 if (rxd->rx_m != NULL) {
2364 bus_dmamap_sync(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap,
2365 BUS_DMASYNC_POSTREAD);
2366 bus_dmamap_unload(sc->sc_cdata.stge_rx_tag, rxd->rx_dmamap);
2369 map = rxd->rx_dmamap;
2370 rxd->rx_dmamap = sc->sc_cdata.stge_rx_sparemap;
2371 sc->sc_cdata.stge_rx_sparemap = map;
2375 rfd = &sc->sc_rdata.stge_rx_ring[idx];
2376 rfd->rfd_frag.frag_word0 =
2377 htole64(FRAG_ADDR(seg.ds_addr) | FRAG_LEN(seg.ds_len));
2378 rfd->rfd_status = 0;
2386 * Set up the receive filter.
2389 stge_set_filter(struct stge_softc *sc)
2391 struct ifnet *ifp = &sc->arpcom.ac_if;
2394 mode = CSR_READ_2(sc, STGE_ReceiveMode);
2395 mode |= RM_ReceiveUnicast;
2396 if ((ifp->if_flags & IFF_BROADCAST) != 0)
2397 mode |= RM_ReceiveBroadcast;
2399 mode &= ~RM_ReceiveBroadcast;
2400 if ((ifp->if_flags & IFF_PROMISC) != 0)
2401 mode |= RM_ReceiveAllFrames;
2403 mode &= ~RM_ReceiveAllFrames;
2405 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2409 stge_set_multi(struct stge_softc *sc)
2411 struct ifnet *ifp = &sc->arpcom.ac_if;
2412 struct ifmultiaddr *ifma;
2418 mode = CSR_READ_2(sc, STGE_ReceiveMode);
2419 if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) {
2420 if ((ifp->if_flags & IFF_PROMISC) != 0)
2421 mode |= RM_ReceiveAllFrames;
2422 else if ((ifp->if_flags & IFF_ALLMULTI) != 0)
2423 mode |= RM_ReceiveMulticast;
2424 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2428 /* clear existing filters. */
2429 CSR_WRITE_4(sc, STGE_HashTable0, 0);
2430 CSR_WRITE_4(sc, STGE_HashTable1, 0);
2433 * Set up the multicast address filter by passing all multicast
2434 * addresses through a CRC generator, and then using the low-order
2435 * 6 bits as an index into the 64 bit multicast hash table. The
2436 * high order bits select the register, while the rest of the bits
2437 * select the bit within the register.
2440 bzero(mchash, sizeof(mchash));
2443 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
2444 if (ifma->ifma_addr->sa_family != AF_LINK)
2446 crc = ether_crc32_be(LLADDR((struct sockaddr_dl *)
2447 ifma->ifma_addr), ETHER_ADDR_LEN);
2449 /* Just want the 6 least significant bits. */
2452 /* Set the corresponding bit in the hash table. */
2453 mchash[crc >> 5] |= 1 << (crc & 0x1f);
2457 mode &= ~(RM_ReceiveMulticast | RM_ReceiveAllFrames);
2459 mode |= RM_ReceiveMulticastHash;
2461 mode &= ~RM_ReceiveMulticastHash;
2463 CSR_WRITE_4(sc, STGE_HashTable0, mchash[0]);
2464 CSR_WRITE_4(sc, STGE_HashTable1, mchash[1]);
2465 CSR_WRITE_2(sc, STGE_ReceiveMode, mode);
2469 sysctl_hw_stge_rxint_nframe(SYSCTL_HANDLER_ARGS)
2471 return (sysctl_int_range(oidp, arg1, arg2, req,
2472 STGE_RXINT_NFRAME_MIN, STGE_RXINT_NFRAME_MAX));
2476 sysctl_hw_stge_rxint_dmawait(SYSCTL_HANDLER_ARGS)
2478 return (sysctl_int_range(oidp, arg1, arg2, req,
2479 STGE_RXINT_DMAWAIT_MIN, STGE_RXINT_DMAWAIT_MAX));