Merge branch 'vendor/TCPDUMP'
[dragonfly.git] / contrib / tcpdump / CHANGES
1 Friday  December 9, 2011.  guy@alum.mit.edu.
2   Summary for 4.2.1 tcpdump release
3         Only build the Babel printer if IPv6 is enabled.
4         Support Babel on port 6696 as well as 6697.
5         Include ppi.h in release tarball.
6         Include all the test files in the release tarball, and don't
7          "include" test files that no longer exist.
8         Don't assume we have <rpc/rpc.h> - check for it.
9         Support "-T carp" as a way of dissecting IP protocol 112 as CARP
10          rather than VRRP.
11         Support Hilscher NetAnalyzer link-layer header format.
12         Constify some pointers and fix compiler warnings.
13         Get rid of never-true test.
14         Fix an unintended fall-through in a case statement in the ARP
15          printer.
16         Fix several cases where sizeof(sizeof(XXX)) was used when just
17          sizeof(XXX) was intended.
18         Make stricter sanity checks in the ES-IS printer.
19         Get rid of some GCCisms that caused builds to fai with compilers
20          that don't support them.
21         Fix typo in man page.
22         Added length checks to Babel printer.
23
24 Sunday  July 24, 2011.  mcr@sandelman.ca.
25   Summary for 4.2.+
26         merged 802.15.4 decoder from Dmitry Eremin-Solenikov <dbaryshkov
27           at gmail dot com>
28         updates to forces for new port numbers
29         Use "-H", not "-h", for the 802.11s option. (-h always help)
30         Better ICMPv6 checksum handling.
31         add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
32         get rid of uuencoded pcap test files, git can do binary.
33         sFlow changes for 64-bit counters.
34         fixes for PPI packet header handling and printing.
35         Add DCB Exchange protocol (DCBX) version 1.01.
36         Babel dissector, from Juliusz Chroboczek and GrĂ©goire Henry.
37         improvements to radiotap for rate values > 127.
38         Many improvements to ForCES decode, including fix SCTP TML port
39         updated RPL type code to RPL-17 draft
40         Improve printout of DHCPv6 options.
41         added support and test case for QinQ (802.1q VLAN) packets
42         Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
43         Build fixes for Sparc and other machines with alignment restrictions.
44         Merged changes from Debian package.
45         PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
46         Build fixes for OSX (Snow Leopard and others)
47         Add support for IEEE 802.15.4 packets
48
49 Tue.    July 20, 2010.  guy@alum.mit.edu.
50   Summary for 4.1.2 tcpdump release
51         If -U is specified, flush the file after creating it, so it's
52           not zero-length
53         Fix TCP flags output description, and some typoes, in the man
54           page
55         Add a -h flag, and only attempt to recognize 802.11s mesh
56           headers if it's set
57         When printing the link-layer type list, send *all* output to
58           stderr
59         Include the CFLAGS setting when configure was run in the
60           compiler flags
61
62 Thu.    April 1, 2010.  guy@alum.mit.edu.
63   Summary for 4.1.1 tcpdump release
64         Fix build on systems with PF, such as FreeBSD and OpenBSD.
65         Don't blow up if a zero-length link-layer address is passed to
66           linkaddr_string(). 
67
68 Thu.    March 11, 2010.  ken@netfunctional.ca/guy@alum.mit.edu.
69   Summary for 4.1.0 tcpdump release
70         Fix printing of MAC addresses for VLAN frames with a length
71           field
72         Add some additional bounds checks and use the EXTRACT_ macros
73           more
74         Add a -b flag to print the AS number in BGP packets in ASDOT
75           notation rather than ASPLAIN notation
76         Add ICMPv6 RFC 5006 support
77         Decode the access flags in NFS access requests
78         Handle the new DLT_ for memory-mapped USB captures on Linux
79         Make the default snapshot (-s) the maximum
80         Print name of device (when -L is used)
81         Support for OpenSolaris (and SXCE build 125 and later)
82         Print new TCP flags
83         Add support for RPL DIO
84         Add support for TCP User Timeout (UTO)
85         Add support for non-standard Ethertypes used by 3com PPPoE gear
86         Add support for 802.11n and 802.11s
87         Add support for Transparent Ethernet Bridge ethertype in GRE
88         Add 4 byte AS support for BGP printer
89         Add support for the MDT SAFI 66 BG printer
90         Add basic IPv6 support to print-olsr
91         Add USB printer
92         Add printer for ForCES
93         Handle frames with an FCS
94         Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
95         Fix TCP sequence number printing 
96         Report 802.2 packets as 802.2 instead of 802.3
97         Don't include -L/usr/lib in LDFLAGS
98         On x86_64 Linux, look in lib64 directory too
99         Lots of code clean ups
100         Autoconf clean ups
101         Update testcases to make output changes
102         Fix compiling with/out smi (--with{,out}-smi)
103         Fix compiling without IPv6 support (--disable-ipv6)
104
105 Mon.    October 27, 2008.  ken@netfunctional.ca.  Summary for 4.0.0 tcpdump release
106         Add support for Bluetooth Sniffing
107         Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
108         Add support for 802.11 AVS
109         Add support for SMB over TCP
110         Add support for 4 byte BGP AS printing
111         Add support for compiling on case-insensitive file systems
112         Add support for ikev2 printing
113         Update support for decoding AFS
114         Update DHCPv6 printer
115         Use newer libpcap API's (allows -B option on all platforms)
116         Add -I to turn on monitor mode
117         Bugfixes in lldp, lspping, dccp, ESP, NFS printers
118         Cleanup unused files and various cruft
119
120 Mon.    September 10, 2007.  ken@xelerance.com.  Summary for 3.9.8 tcpdump release
121         Rework ARP printer
122         Rework OSPFv3 printer
123         Add support for Frame-Relay ARP
124         Decode DHCP Option 121 (RFC 3442 Classless Static Route)
125         Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
126         TLV: Add support for Juniper .pcap extensions
127         Print EGP header in new-world-order style
128         Converted print-isakmp.c to NETDISSECT
129         Moved AF specific stuff into af.h
130         Test subsystem now table driven, and saves outputs and diffs to one place
131         Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted 
132          libpcap files on an OS other than where the file was generated
133
134
135 Wed.    July 23, 2007.  mcr@xelerance.com.  Summary for 3.9.7 libpcap release
136
137         NFS: Print unsigned values as such. 
138         RX: parse safely.
139         BGP: fixes for IPv6-less builds.
140         801.1ag: use standard codepoint.
141         use /dev/bpf on systems with such a device.
142         802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
143         smb: make sure that we haven't gone past the end of the captured data.
144         smb: squelch an uninitialized complaint from coverity.
145         NFS: from NetBSD; don't interpret the reply as a possible NFS reply
146                 if it got MSG_DENIED.
147         BGP: don't print TLV values that didn't fit, from www.digit-labs.org. 
148         revised INSTALL.txt about libpcap dependancy.
149
150 Wed.    April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
151         Update man page to reflect changes to libpcap
152         Changes to both TCP and IP Printer Output
153         Fix a potential buffer overflow in the 802.11 printer
154         Print basic info about a few more Cisco LAN protocols.
155         mDNS cleanup
156         ICMP MPLS rework of the extension code
157         bugfix: use the correct codepoint for the OSPF simple text auth token
158          entry, and use safeputs to print the password.
159         Add support in pflog for additional values
160         Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
161         Add support for the Message-id NACK c-type.
162         Add support for 802.3ah loopback ctrl msg
163         Add support for Multiple-STP as per 802.1s
164         Add support for rapid-SPT as per 802.1w
165         Add support for CFM Link-trace msg, Link-trace-Reply msg, 
166          Sender-ID tlv, private tlv, port, interface status
167         Add support for unidirectional link detection as per
168          http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt
169         Add support for the olsr protocol as per RFC 3626 plus the LQ 
170          extensions from olsr.org
171         Add support for variable-length checksum in DCCP, as per section 9 of
172          RFC 4340.
173         Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
174         Add support for Multiple-STP as per 802.1s
175         Add support for the cisco propriatry 'dynamic trunking protocol'
176         Add support for the cisco proprietary VTP protocol
177         Update dhcp6 options table as per IETF standardization activities
178
179
180 Tue.    September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release
181         
182         Fix compiling on AIX (, at end of ENUM)
183         Updated list of DNS RR typecodes
184         Use local Ethernet defs on WIN32
185         Add support for Frame-Relay ARP
186         Fixes for compiling under MSVC++
187         Add support for parsing Juniper .pcap files
188         Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
189         Rework the OSPFv3 printer
190         Fix printing for 4.4BSD/NetBSD NFS Filehandles
191         Add support for Cisco style NLPID encapsulation
192         Add cisco prop. eigrp related, extended communities
193         Add support for BGP signaled VPLS
194         Cleanup the bootp printer
195         Add support for PPP over Frame-Relay
196         Add some bounds checking to the IP options code, and clean up 
197          the options output a bit.
198         Add additional modp groups to ISAKMP printer
199         Add support for Address-Withdraw and Label-Withdraw Msgs
200         Add support for the BFD Discriminator TLV
201         Fixes for 64bit compiling
202         Add support for PIMv2 checksum verification
203         Add support for further dissection of the IPCP Compression Option
204         Add support for Cisco's proposed VQP protocol
205         Add basic support for keyed authentication TCP option
206         Lots of minor cosmetic changes to output printers
207
208
209 Mon.    September 19, 2005.  ken@xelerance.com. Summary for 3.9.4 tcpdump release
210         Decoder support for more Juniper link-layer types
211         Fix a potential buffer overflow (although it can't occur in
212                 practice).
213         Fix the handling of unknown management frame types in the 802.11
214                 printer.
215         Add FRF.16 support, fix various Frame Relay bugs.
216         Add support for RSVP integrity objects, update fast-reroute
217                 object printer to latest spec.
218         Clean up documentation of vlan filter expression, document mpls
219                 filter expression.
220         Document new pppoed and pppoes filter expressions.
221         Update diffserver-TE codepoints as per RFC 4124.
222         Spelling fixes in ICMPv6.
223         Don't require any fields other than flags to be present in IS-IS
224                 restart signaling TLVs, and only print the system ID in
225                 those TLVs as system IDs, not as node IDs.
226         Support for DCCP.
227
228 Tue.    July 5, 2005.  ken@xelerance.com. Summary for 3.9.3 tcpdump release
229
230         Option to chroot() when dropping privs
231         Fixes for compiling on nearly every platform,
232                 including improved 64bit support
233         Many new testcases
234         Support for sending packets
235         Many compliation fixes on most platforms
236         Fixes for recent version of GCC to eliminate warnings
237         Improved Unicode support
238
239         Decoders & DLT Changes, Updates and New:
240                 AES ESP support
241                 Juniper ATM, FRF.15, FRF.16, PPPoE,
242                         ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC
243                         GGSN,ES,MONITOR,SERVICES
244                 L2VPN
245                 Axent Raptor/Symantec Firewall
246                 TCP-MD5 (RFC 2385)
247                 ESP-in-UDP (RFC 3948)
248                 ATM OAM
249                 LMP, LMP Service Discovery
250                 IP over FC
251                 IP over IEEE 1394
252                 BACnet MS/TP
253                 SS7
254                 LDP over TCP
255                 LACP, MARKER as per 802.3ad
256                 PGM (RFC 3208)
257                 LSP-PING
258                 G.7041/Y.1303 Generic Framing Procedure
259                 EIGRP-IP, EIGRP-IPX
260                 ICMP6
261                 Radio - via radiotap
262                 DHCPv6
263                 HDLC over PPP
264
265 Tue.   March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
266
267         No changes from 3.8.2. Version bumped only to maintain consistency
268         with libpcap 0.8.3.
269
270 Mon.   March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
271
272         Fixes for print-isakmp.c      CVE:    CAN-2004-0183, CAN-2004-0184
273                              http://www.rapid7.com/advisories/R7-0017.html
274         IP-over-IEEE1394 printing.
275         some MINGW32 changes.
276         updates for autoconf 2.5
277         fixes for print-aodv.c - check for too short packets
278         formatting changes to print-ascii for hex output.
279         check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c,
280                 print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c,
281                 print-ip.c, print-lwres.c, print-ospf.c, print-pim.c,
282                 print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c
283         print-ether.c - better handling of unknown types.
284         print-isoclns.c - additional decoding of types.
285         print-llc.c - strings for LLC names added.
286         print-pfloc.c - various enhancements
287         print-radius.c - better decoding to strings.
288
289 Wed.   November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release
290
291         changed syntax of -E argument so that multiple SAs can be decrypted
292         fixes for Digital Unix headers and Documentation
293         __attribute__ fixes
294         CDP changes from Terry Kennedy <terry@tmk.com>.
295         IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com>
296         Fixes for ASN.1 decoder for 2.100.3 forms.
297         Added a count of packets received and processed to clarify numbers.
298         Incorporated WinDUMP patches for Win32 builds.
299         PPPoE payload length headers.
300         Fixes for HP C compiler builds.
301         Use new pcap_breakloop() and pcap_findalldevs() if we can.
302         BGP output split into multiple lines.
303         Fixes to 802.11 decoding.
304         Fixes to PIM decoder.
305         SuperH is a CPU that can't handle unaligned access. Many fixes for
306                 unaligned access work.
307         Fixes to Frame-Relay decoder for Q.933/922 frames.
308         Clarified when Solaris can do captures as non-root.
309         Added tests/ subdir for examples/regression tests.
310         New -U flag.    -flush stdout after every packet
311         New -A flag     -print ascii only
312         support for decoding IS-IS inside Cisco HDLC Frames
313         more verbosity for tftp decoder
314         mDNS decoder
315         new BFD decoder
316         cross compilation patches
317         RFC 3561 AODV support.
318         UDP/TCP pseudo-checksum properly for source-route options.
319         sanitized all files to modified BSD license
320         Add support for RFC 2625 IP-over-Fibre Channel.
321         fixes for DECnet support.
322         Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI.
323         RFC 2684 encapsulation of BPDUs.
324
325 Tuesday, February 25, 2003. fenner@research.att.com.  3.7.2 release
326
327         Fixed infinite loop when parsing malformed isakmp packets.
328          (reported by iDefense; already fixed in CVS)
329         Fixed infinite loop when parsing malformed BGP packets.
330         Fixed buffer overflow with certain malformed NFS packets.
331         Pretty-print unprintable network names in 802.11 printer.
332         Handle truncated nbp (appletalk) packets.
333         Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt
334         Print IP protocol name even if we don't have a printer for it.
335         Print IP protocol name or number for fragments.
336         Print the whole MPLS label stack, not just the top label.
337         Print request header and file handle for NFS v3 FSINFO and PATHCONF
338          requests.
339         Fix NFS packet truncation checks.
340         Handle "old" DR-Priority and Bidir-Capable PIM HELLO options.
341         Handle unknown RADIUS attributes properly.
342         Fix an ASN.1 parsing error that would cause e.g. the OID
343          2.100.3 to be misrepresented as 4.20.3 .
344
345 Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release
346 see http://www.tcpdump.org/cvs-log/2002-01-21.10:16:48.html for commit log.
347         keyword "ipx" added.
348         Better OSI/802.2 support on Linux.
349         IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net.
350         LLC SAP support for FDDI/token ring/RFC-1483 style ATM
351         BXXP protocol was replaced by the BEEP protocol;
352         improvements to SNAP demux.
353         Changes to "any" interface documentation.
354         Documentation on pcap_stats() counters.
355         Fix a memory leak found by Miklos Szeredi - pcap_ether_aton().
356         Added MPLS encapsulation decoding per RFC3032.
357         DNS dissector handles TKEY, TSIG and IXFR.
358         adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org>
359         SMB printing has much improved bounds checks
360         OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging
361         Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>.
362         Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net>
363         IPX socket 0x85be is for Cisco EIGRP over IPX.
364         Improvements to fragmented ESP handling.
365         SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
366         Linux ARPHDR_ATM support fixed.
367         Added a "netbeui" keyword, which selects NetBEUI packets.
368         IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option.
369         Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>.
370         Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm"
371         Better Linux libc5 compat.
372         BIND9 lwres dissector added.
373         MIPS and SPARC get strict alignment macros (affects print-bgp.c)
374         Apple LocalTalk LINKTYPE_ reserved.
375         New time stamp formats documented.
376         DHCP6 updated to draft-22.txt spec.
377         ICMP types/codes now accept symbolic names.
378         Add SIGINFO handler from LBL
379         encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>.
380         now we are -Wstrict-prototype clean.
381         NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>.
382         PPPoE dissector cleaned up.
383         Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>.
384         In dissector, now the caller prints the IP addresses rather than proto.
385         cjclark@alum.mit.edu: print the IP proto for non-initial fragments.
386         LLC frames with a DSAP and LSAP of 0xe0 are IPX frames.
387         Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX.
388         captures on the "any" device won't be done in promiscuous mode
389         Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl>
390         ARCNet support, from NetBSD.
391         HSRP dissector, from Julian Cowley <julian@lava.net>.
392         Handle (GRE-encapsulated) PPTP
393         added -C option to rotate save file every optarg * 1,000,000 bytes.
394         support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>.
395         PPTP support, from Motonori Shindo <mshindo@mshindo.net>.
396         IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>.
397         CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>.
398         ESP printing updated to RFC2406.
399         HP-UX can now handle large number of PPAs.
400         MSDP printer added.
401         L2TP dissector improvements from Motonori Shindo.
402
403 Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release
404         Cleaned up documentation.
405         Promisc mode fixes for Linux
406         IPsec changes/cleanups.
407         Alignment fixes for picky architectures
408
409         Removed dependency on native headers for packet dissectors.
410         Removed Linux specific headers that were shipped
411
412         libpcap changes provide for exchanging capture files between
413           systems. Save files now have well known PACKET_ values instead of
414           depending upon system dependant mappings of DLT_* types.
415
416         Support for computing/checking IP and UDP/TCP checksums.
417
418         Updated autoconf stock files.
419
420         IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6,
421
422         Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp,
423                 timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk
424
425         Added filtering support for: VLANs, ESIS, ISIS
426
427         Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP,
428                 L2TP, PPPoE
429
430         HP-UX 11.0 -- find the right dlpi device.
431         Solaris 8 - IPv6 works
432         Linux - Added support for an "any" device to capture on all interfaces
433
434         Security fixes: buffer overrun audit done. Strcpy replaced with
435                 strlcpy, sprintf replaced with snprintf.
436         Look for lex problems, and warn about them.
437
438
439 v3.5 Fri Jan 28 18:00:00 PST 2000
440
441 Bill Fenner <fenner@research.att.com>
442 - switch to config.h for autoconf
443 - unify RCSID strings
444 - Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser
445 - Really fix the RIP printer
446 - Fix MAC address -> name translation.
447 - some -Wall -Wformat fixes
448 - update makemib to parse much of SMIv2
449 - Print TCP sequence # with -vv even if you normally wouldn't
450 - Print as much of IP/TCP/UDP headers as possible even if truncated.
451
452 itojun@iijlab.net
453 - -X will make a ascii dump.  from netbsd.
454 - telnet command sequence decoder (ff xx xx).  from netbsd.
455 - print-bgp.c: improve options printing.  ugly code exists for
456   unaligned option parsing (need some fix).
457 - const poisoning in SMB decoder.
458 - -Wall -Werror clean checks.
459 - bring in KAME IPv6/IPsec decoding code.
460
461 Assar Westerlund  <assar@sics.se>
462 - SNMPv2 and SNMPv3 printer
463 - If compiled with libsmi, tcpdump can load MIBs on the fly to decode
464   SNMP packets.
465 - Incorporate NFS parsing code from NetBSD.  Adds support for nfsv3.
466 - portability fixes
467 - permit building in different directories.
468
469 Ken Hornstein <kenh@cmf.nrl.navy.mil>
470 - bring in code at
471   /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing
472   AFS3 packets
473
474 Andrew Tridgell <tridge@linuxcare.com>
475 - SMB printing code
476
477 Love <lha@stacken.kth.se>
478 - print-rx.c: add code for printing MakeDir and StoreStatus.  Also
479   change date format to the right one.
480
481 Michael C. Richardson  <mcr@sandelman.ottawa.on.ca>
482 - Created tcpdump.org repository
483
484 v3.4 Sat Jul 25 12:40:55 PDT 1998
485
486 - Hardwire Linux slip support since it's too hard to detect.
487
488 - Redo configuration of "network" libraries (-lsocket and -lnsl) to
489   deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu)
490
491 - Added -a which tries to translate network and broadcast addresses to
492   names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl)
493
494 - Added a configure option to disable gcc.
495
496 - Added a "raw" packet printer.
497
498 - Not having an interface address is no longer fatal. Requested by John
499   Hawkinson.
500
501 - Rework signal setup to accommodate Linux.
502
503 - OSPF truncation check fix. Also display the type of OSPF packets
504   using MD5 authentication. Thanks to Brian Wellington
505   (bwelling@tis.com)
506
507 - Fix truncation check bugs in the Kerberos printer. Reported by Ezra
508   Peisach (epeisach@mit.edu)
509
510 - Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka
511   (plonka@mfa.com)
512
513 - Specify full install target as a way of detecting if install
514   directory does not exist. Thanks to Dave Plonka.
515
516 - Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie
517   (paul@vix.com)
518
519 - Fix off-by-one bug when testing size of ethernet packets. Thanks to
520   Marty Leisner (leisner@sdsp.mc.xerox.com)
521
522 - Add a local autoconf macro to check for routines in libraries; the
523   autoconf version is broken (it only puts the library name in the
524   cache variable name). Thanks to John Hawkinson.
525
526 - Add a local autoconf macro to check for types; the autoconf version
527   is broken (it uses grep instead of actually compiling a code fragment).
528
529 - Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
530   formats.
531
532 - Extend OSF ip header workaround to versions 1 and 2.
533
534 - Fix some signed problems in the nfs printer. As reported by David
535   Sacerdote (davids@silence.secnet.com)
536
537 - Detect group wheel and use it as the default since BSD/OS' install
538   can't hack numeric groups. Reported by David Sacerdote.
539
540 - AIX needs special loader options. Thanks to Jonathan I. Kamens
541   (jik@cam.ov.com)
542
543 - Fixed the nfs printer to print port numbers in decimal. Thanks to
544   Kent Vander Velden (graphix@iastate.edu)
545
546 - Find installed libpcap in /usr/local/lib when not using gcc.
547
548 - Disallow network masks with non-network bits set.
549
550 - Attempt to detect "egcs" versions of gcc.
551
552 - Add missing closing double quotes when displaying bootp strings.
553   Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca)
554
555 v3.3 Sat Nov 30 20:56:27 PST 1996
556
557 - Added Linux support.
558
559 - GRE encapsulated packet printer thanks to John Hawkinson
560   (jhawk@mit.edu)
561
562 - Rewrite gmt2local() to avoid problematic os dependencies.
563
564 - Suppress nfs truncation message on errors.
565
566 - Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro.
567   Reported by Joachim Ott (ott@ardala.han.de)
568
569 - Enable "ip_hl vs. ip_vhl" workaround for OSF4 too.
570
571 - Print arp hardware type in host order. Thanks to Onno van der Linden
572   (onno@simplex.nl)
573
574 - Avoid solaris compiler warnings. Thanks to Bruce Barnett
575   (barnett@grymoire.crd.ge.com)
576
577 - Fix rip printer to not print one more route than is actually in the
578   packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and
579   Bill Fenner (fenner@parc.xerox.com)
580
581 - Use autoconf endian detection since BYTE_ORDER isn't defined on all systems.
582
583 - Fix dvmrp printer truncation checks and add a dvmrp probe printer.
584   Thanks to Danny J. Mitzel (mitzel@ipsilon.com)
585
586 - Rewrite ospf printer to improve truncation checks.
587
588 - Don't parse tcp options past the EOL. As noted by David Sacerdote
589   (davids@secnet.com). Also, check tcp options to make sure they ar
590   actually in the tcp header (in addition to the normal truncation
591   checks). Fix the SACK code to print the N blocks (instead of the
592   first block N times).
593
594 - Don't say really small UDP packets are truncated just because they
595   aren't big enough to be a RPC. As noted by David Sacerdote.
596
597 v3.2.1 Sun Jul 14 03:02:26 PDT 1996
598
599 - Added rfc1716 icmp codes as suggested by Martin Fredriksson
600   (martin@msp.se)
601
602 - Print mtu for icmp unreach need frag packets. Thanks to John
603   Hawkinson (jhawk@mit.edu)
604
605 - Decode icmp router discovery messages. Thanks to Jeffrey Honig
606   (jch@bsdi.com)
607
608 - Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida
609   (kushida@trl.ibm.co.jp)
610
611 - Check igmp checksum if possible. Thanks to John Hawkinson.
612
613 - Made changes for SINIX. Thanks to Andrej Borsenkow
614   (borsenkow.msk@sni.de)
615
616 - Use autoconf's idea of the top level directory in install targets.
617   Thanks to John Hawkinson.
618
619 - Avoid infinite loop in tcp options printing code. Thanks to Jeffrey
620   Mogul (mogul@pa.dec.com)
621
622 - Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop.
623   Thanks to John Hawkinson.
624
625 - Added some more packet truncation checks.
626
627 - On systems that have it, use sigset() instead of signal() since
628   signal() has different semantics on these systems.
629
630 - Fixed some more alignment problems on the alpha.
631
632 - Add code to massage unprintable characters in the domain and ipx
633   printers. Thanks to John Hawkinson.
634
635 - Added explicit netmask support. Thanks to Steve Nuchia
636   (steve@research.oknet.com)
637
638 - Add "sca" keyword (for DEC cluster services) as suggested by Terry
639   Kennedy (terry@spcvxa.spc.edu)
640
641 - Add "atalk" keyword as suggested by John Hawkinson.
642
643 - Added an igrp printer. Thanks to Francis Dupont
644   (francis.dupont@inria.fr)
645
646 - Print IPX net numbers in hex a la Novell Netware. Thanks to Terry
647   Kennedy (terry@spcvxa.spc.edu)
648
649 - Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin
650   (pascal.hennequin@hugo.int-evry.fr)
651
652 - Added some ETHERTYPEs missing on some systems.
653
654 - Added truncated packet macros and various checks.
655
656 - Fixed endian problems with the DECnet printer.
657
658 - Use $CC when checking gcc version. Thanks to Carl Lindberg
659   (carl_lindberg@blacksmith.com)
660
661 - Fixes for AIX (although this system is not yet supported). Thanks to
662   John Hawkinson.
663
664 - Fix bugs in the autoconf misaligned accesses code fragment.
665
666 - Include sys/param.h to get BYTE_ORDER in a few places. Thanks to
667   Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp)
668
669 v3.2 Sun Jun 23 02:28:10 PDT 1996
670
671 - Print new icmp unreachable codes as suggested by Martin Fredriksson
672   (martin@msp.se). Also print code value when unknown for icmp redirect
673   and time exceeded.
674
675 - Fix an alignment endian bug in getname(). Thanks to John Hawkinson.
676
677 - Define "new" domain record types if not found in arpa/nameserv.h.
678   Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also
679   fixed an endian bug when printing mx record and added some new record
680   types.
681
682 - Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com)
683
684 - Added T/TCP options printing. As suggested by Richard Stevens
685   (rstevens@noao.edu)
686
687 - Use autoconf to detect architectures that can't handle misaligned
688   accesses.
689
690 v3.1 Thu Jun 13 20:59:32 PDT 1996
691
692 - Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd
693   and bind (as suggested by Charles Hannum).
694
695 - Port to GNU autoconf.
696
697 - Add support for printing DVMRP and PIM traffic thanks to
698   Havard Eidnes (Havard.Eidnes@runit.sintef.no).
699
700 - Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian
701   define being referenced. Reported by Terry Kennedy.
702
703 - Minor fixes to the man page thanks to Mark Andrews.
704
705 - Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah
706   (bmah@cs.berkeley.edu).
707
708 - Added support for new dns types, thanks to Rainer Orth.
709
710 - Fixed tftp_print() to print the block number for ACKs.
711
712 - Document -dd and -ddd. Resulted from a bug report from Charlie Slater
713   (cslater@imatek.com).
714
715 - Check return status from malloc/calloc/etc.
716
717 - Check return status from pcap_loop() so we can print an error and
718   exit with a bad status if there were problems.
719
720 - Bail if ip option length is <= 0. Resulted from a bug report from
721   Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au).
722
723 - Print out a little more information for sun rpc packets.
724
725 - Add suport for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu).
726
727 - Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were
728   wrong on little endian machines).
729
730 - Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford
731   (crawdad@fnal.gov).
732
733 - Fix ntp_print() to not print garbage when the stratum is
734   "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com).
735
736 - Rewrote tcp options printer code to check for truncation. Added
737   selective acknowledgment case.
738
739 - Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig
740   (jch@bsdi.com)
741
742 - Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one
743   octet for the sa_family member. Thanks to Yoshitaka Tokugawa
744   (toku@dit.co.jp)
745
746 - Don't checksum ip header if we don't have all of it. Thanks to John
747   Hawkinson (jhawk@mit.edu).
748
749 - Print out hostnames if possible in egp printer. Thanks to Jeffrey
750   Honig (jhc@bsdi.com)
751
752
753 v3.1a1 Wed May  3 19:21:11 PDT 1995
754
755 - Include time.h when SVR4 is defined to avoid problems under Solaris
756   2.3.
757
758 - Fix etheraddr_string() in the ETHER_SERVICE to return the saved
759   strings, not the local buffer. Thanks to Stefan Petri
760   (petri@ibr.cs.tu-bs.de).
761
762 - Detect when pcap raises the snaplen (e.g. with snit). Print a warning
763   that the selected value was not used. Thanks to Pascal Hennequin
764   (Pascal.Hennequin@hugo.int-evry.fr).
765
766 - Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin.
767
768 - BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu).
769
770 v3.0.3 Sun Oct  1 18:35:00 GMT 1995
771
772 - Although there never was a 3.0.3 release, the linux boys cleverly
773   "released" one in late 1995.
774
775 v3.0.2 Thu Apr 20 21:28:16 PDT 1995
776
777 - Change configuration to not use gcc v2 flags with gcc v1.
778
779 - Redo gmt2local() so that it works under BSDI (which seems to return
780   an empty timezone struct from gettimeofday()). Based on report from
781   Terry Kennedy (terry@spcvxa.spc.edu).
782
783 - Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based
784   on report from Mark Andrews (mandrews@alias.com).
785
786 - Don't pass cc flags to gcc. Resulted from a bug report from Rainer
787   Orth (ro@techfak.uni-bielefeld.de).
788
789 - Fixed printout of connection id for uncompressed tcp slip packets.
790   Resulted from a bug report from Richard Stevens (rstevens@noao.edu).
791
792 - Hack around deficiency in Ultrix's make.
793
794 - Add ETHERTYPE_TRAIL define which is missing from irix5.
795
796 v3.0.1 Wed Aug 31 22:42:26 PDT 1994
797
798 - Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4.
799
800 v3.0 Mon Jun 20 19:23:27 PDT 1994
801
802 - Added support for printing tcp option timestamps thanks to
803   Mark Andrews (mandrews@alias.com).
804
805 - Reorganize protocol dumpers to take const pointers to packets so they
806   never change the contents (i.e., they used to do endian conversions
807   in place).  Previously, whenever more than one pass was taken over
808   the packet, the packet contents would be dumped incorrectly (i.e.,
809   the output form -x would be wrong on little endian machines because
810   the protocol dumpers would modify the data).  Thanks to Charles Hannum
811   (mycroft@gnu.ai.mit.edu) for reporting this problem.
812
813 - Added support for decnet protocol dumping thanks to Jeff Mogul
814   (mogul@pa.dec.com).
815
816 - Fix bug that caused length of packet to be incorrectly printed
817   (off by ether header size) for unknown ethernet types thanks
818   to Greg Miller (gmiller@kayak.mitre.org).
819
820 - Added support for IPX protocol dumping thanks to Brad Parker
821   (brad@fcr.com).
822
823 - Added check to verify IP header checksum under -v thanks to
824   Brad Parker (brad@fcr.com).
825
826 - Move packet capture code to new libpcap library (which is
827   packaged separately).
828
829 - Prototype everything and assume an ansi compiler.
830
831 - print-arp.c: Print hardware ethernet addresses if they're not
832   what we expect.
833
834 - print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags.
835   Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com).
836
837 - print-fddi.c: Improvements. Thanks to Jeffrey Mogul
838   (mogul@pa.dec.com).
839
840 - print-icmp.c: Byte swap netmask before printing. Thanks to
841   Richard Stevens (rstevens@noao.edu). Print icmp type when unknown.
842
843 - print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets.
844   By default, only the inner packet is dumped, appended with the token
845   "(encap)".  Under -v, both the inner and output packets are dumped
846   (on the same line).  Note that the filter applies to the original packet,
847   not the encapsulated packet.  So if you run tcpdump on a net with an
848   IP Multicast tunnel, you cannot filter out the datagrams using the
849   conventional syntax.  (You can filter away all the ip-in-ip traffic
850   with "not ip proto 4".)
851
852 - print-nfs.c: Keep pending rpc's in circular table. Add generic
853   nfs header and remove os dependences. Thanks to Jeffrey Mogul.
854
855 - print-ospf.c: Improvements. Thanks to Jeffrey Mogul.
856
857 - tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc"
858   (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords
859   Add && and || operators
860
861 v2.2.1 Tue Jun 6 17:57:22 PDT 1992
862
863 - Fix bug with -c flag.
864
865 v2.2 Fri May 22 17:19:41 PDT 1992
866
867 - savefile.c: Remove hack that shouldn't have been exported. Add
868   truncate checks.
869
870 - Added the 'icmp' keyword.  For example, 'icmp[0] != 8 and icmp[0] != 0'
871   matches non-echo/reply ICMP packets.
872
873 - Many improvements to filter code optimizer.
874
875 - Added 'multicast' keyword and extended the 'broadcast' keyword can now be
876   so that protocol qualifications are allowed. For example, "ip broadcast"
877   and "ether multicast" are valid filters.
878
879 - Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo').
880   Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel
881   patches to netinet/if_loop.c.
882
883 - Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS.
884   Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs.
885
886 - Added EGP and OSPF printers, thanks to Jeffrey Honig.
887
888 v2.1 Tue Jan 28 11:00:14 PST 1992
889
890 - Internal release (never publically exported).
891
892 v2.0.1 Sun Jan 26 21:10:10 PDT
893
894 - Various byte ordering fixes.
895
896 - Add truncation checks.
897
898 - inet.c: Support BSD style SIOCGIFCONF.
899
900 - nametoaddr.c: Handle multi addresses for single host.
901
902 - optimize.c: Rewritten.
903
904 - pcap-bpf.c: don't choke when we get ptraced. only set promiscuous
905   for broadcast nets.
906
907 - print-atal.c: Fix an alignment bug (thanks to
908   stanonik@nprdc.navy.mil) Add missing printf() argument.
909
910 - print-bootp.c: First attempt at decoding the vendor buffer.
911
912 - print-domain.c: Fix truncation checks.
913
914 - print-icmp.c: Calculate length of packets from the ip header.
915
916 - print-ip.c: Print frag id in decimal (so it's easier to match up
917   with non-frags). Add support for ospf, egp and igmp.
918
919 - print-nfs.c: Lots of changes.
920
921 - print-ntp.c: Make some verbose output depend on -v.
922
923 - print-snmp.c: New version from John LoVerso.
924
925 - print-tcp.c: Print rfc1072 tcp options.
926
927 - tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits
928   (microseconds) worth of precision. Fix uid bugs.
929
930 - A packet dumper has been added (thanks to Jeff Mogul of DECWRL).
931   With this option, you can create an architecture independent binary
932   trace file in real time, without the overhead of the packet printer.
933   At a later time, the packets can be filtered (again) and printed.
934
935 - BSD is supported.  You must have BPF in your kernel.
936   Since the filtering is now done in the kernel, fewer packets are
937   dropped.  In fact, with BPF and the packet dumper option, a measly
938   Sun 3/50 can keep up with a busy network.
939
940 - Compressed SLIP packets can now be dumped, provided you use our
941   SLIP software and BPF.  These packets are dumped as any other IP
942   packet; the compressed headers are dumped with the '-e' option.
943
944 - Machines with little-endian byte ordering are supported (thanks to
945   Jeff Mogul).
946
947 - Ultrix 4.0 is supported (also thanks to Jeff Mogul).
948
949 - IBM RT and Stanford Enetfilter support has been added by
950   Rayan Zachariassen <rayan@canet.ca>.  Tcpdump has been tested under
951   both the vanilla Enetfilter interface, and the extended interface
952   (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter.
953
954 - TFTP packets are now printed (requests only).
955
956 - BOOTP packets are now printed.
957
958 - SNMP packets are now printed. (thanks to John LoVerso of Xylogics).
959
960 - Sparc architectures, including the Sparcstation-1, are now
961   supported thanks to Steve McCanne and Craig Leres.
962
963 - SunOS 4 is now supported thanks to Micky Liu of Columbia
964   University (micky@cunixc.cc.columbia.edu).
965
966 - IP options are now printed.
967
968 - RIP packets are now printed.
969
970 - There's a -v flag that prints out more information than the
971   default (e.g., it will enable printing of IP ttl, tos and id)
972   and -q flag that prints out less (e.g., it will disable
973   interpretation of AppleTalk-in-UDP).
974
975 - The grammar has undergone substantial changes (if you have an
976   earlier version of tcpdump, you should re-read the manual
977   entry).
978
979   The most useful change is the addition of an expression
980   syntax that lets you filter on arbitrary fields or values in the
981   packet.  E.g., "ip[0] > 0x45" would print only packets with IP
982   options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN
983   packets.
984
985   The most painful change is that concatenation no longer means
986   "and" -- e.g., you have to say "host foo and port bar" instead
987   of "host foo port bar".  The up side to this down is that
988   repeated qualifiers can be omitted, making most filter
989   expressions shorter.  E.g., you can now say "ip host foo and
990   (bar or baz)" to look at ip traffic between hosts foo and bar or
991   between hosts foo and baz.  [The old way of saying this was "ip
992   host foo and (ip host bar or ip host baz)".]
993
994 v2.0 Sun Jan 13 12:20:40 PST 1991
995
996 - Initial public release.