Antonio Huete Jimenez [Thu, 27 Nov 2014 21:15:40 +0000 (22:15 +0100)]
mountd - Use the standard IPV6_V6ONLY
Taken from: FreeBSD SVN 100505
Antonio Huete Jimenez [Thu, 27 Nov 2014 20:59:20 +0000 (21:59 +0100)]
mountd - Try shorter replies for RPC failures
- If an RPC fails, try a shorter reply in case the fault lies with the
size of the response.
Taken from: FreeBSD SVN 100117
Antonio Huete Jimenez [Thu, 27 Nov 2014 20:26:37 +0000 (21:26 +0100)]
mountd - Remove old pre-TIRPC code
- Remove old pre-TIRPC code for getting transport handles.
Taken from: FreeBSD SVN 98826
Antonio Huete Jimenez [Thu, 27 Nov 2014 20:22:36 +0000 (21:22 +0100)]
mountd - Use fgetln() to read /etc/exports
- Removes the line length limit.
Taken from: FreeBSD SVN 96622
Antonio Huete Jimenez [Thu, 27 Nov 2014 14:54:53 +0000 (15:54 +0100)]
mountd - Module load handling
- Change the way the 'nfs' module is loaded.
- Use getsysctlbyname() to get vfs.nfs.nfs_privport
Taken from: FreeBSD SVN 83687
Sascha Wildner [Thu, 27 Nov 2014 18:17:11 +0000 (19:17 +0100)]
bsd-family-tree: Sync with FreeBSD.
* DragonFly 4.0.1
* FreeBSD 10.1
* NetBSD 6.1.5
* OpenBSD 5.6
Antonio Huete Jimenez [Wed, 26 Nov 2014 23:19:33 +0000 (00:19 +0100)]
nfs - Remove unused kerberos code [Userland]
- This commit removes unused kerberos code from mount_nfs(8) and
mountd(8).
- After a bit of research, apparently the code never worked on FreeBSD
since it was imported around 1995
Partially taken from: FreeBSD SVN 83653
Matthew Dillon [Wed, 26 Nov 2014 21:12:50 +0000 (13:12 -0800)]
kernel - Fix race in recent callout work
* CALLOUT_ARMED can only be cleared if the callout is not PENDING and also
if there are no IPIs pending. The last bit wasn't being checked properly,
potentially leading to MP races.
Antonio Huete Jimenez [Wed, 26 Nov 2014 17:55:50 +0000 (18:55 +0100)]
mountd - Look up addresses before using getnetbyname()
- Lookup '-network' and '-mask' addresses numerically before trying
getnetbyname()
- This avoids silly DNS queries.
Taken from: FreeBSD SVN 75861
Matthew Dillon [Wed, 26 Nov 2014 20:19:57 +0000 (12:19 -0800)]
drm - Fix improper M_NOWAIT usage
* Remove numerous mis-uses of M_NOWAIT, replacing with M_WAITOK | M_NULLOK.
Imre Vadasz [Wed, 26 Nov 2014 13:37:52 +0000 (14:37 +0100)]
kernel/acpi: Add missing ACPI_SERIAL_INIT calls for lock initialization.
Antonio Huete Jimenez [Wed, 26 Nov 2014 17:41:43 +0000 (18:41 +0100)]
mountd - IPv6 fixes for parsing and error checking
- Fix numerous problems with netmasks in /etc/exports
- Improved get_net() and fixed an error with partial networks such
as '127.1'
- More information in the SVN commit message
Taken from: FreeBSD SVN 75801
Joris Giovannangeli [Wed, 26 Nov 2014 16:42:30 +0000 (17:42 +0100)]
dc(1): init array field in the proper place.
Obtained-from: OpenBSD
Found-by: Sebastien Marie
François Tigeot [Wed, 26 Nov 2014 07:49:24 +0000 (08:49 +0100)]
drm/i915: Rename mm.gtt_list to bound_list
Reducing differences with Linux 3.8.13.
Matthew Dillon [Tue, 25 Nov 2014 22:11:42 +0000 (14:11 -0800)]
kernel - Fix boot-time panic in NATA revealed by new callout mechanics
* The NATA driver was using spin locks in a very, very dangerous way.
They did not play nice with the new blocking callout mechanism.
* Replace all of NATAs spinlocks with lockmgr locks. In addition, change
all asynchronous callout_stop() calls to synchronous callout_stop_sync()
calls, and use callout_init_lk() to auto-lock ch->state_lock for the
callback, which fixes a long-time deadlock race.
Reported-by: tuxillo
Matthew Dillon [Tue, 25 Nov 2014 19:14:30 +0000 (11:14 -0800)]
kernel - Show ukmap in /proc/*/map output
* /proc/*/map now displays uksmap mappings.
Matthew Dillon [Tue, 25 Nov 2014 18:57:13 +0000 (10:57 -0800)]
kernel - Fix panic on upmap/kpmap read via procfs.
* Fix a panic when upmap/kpmap is accessed via procfs.
Reported-by: Joris Giovannangeli
Matthew Dillon [Tue, 25 Nov 2014 18:20:41 +0000 (10:20 -0800)]
kernel - Fix callout deadlock in u4b
* Fix a deadlock which could freeze systems prior to the callout work and
cause X to deadlock (but not totally freeze a system) after the callout
work.
* Use the new callout_init_lk() auto-locking feature to handle a particular
usb callout. This allows the callout to be canceled if it interferes with
a frontend callout_reset() call and also fixes the related race.
Matthew Dillon [Tue, 25 Nov 2014 18:15:42 +0000 (10:15 -0800)]
kernel - Implement new callout*() core
* Rewrite the callout*() function core to run more efficiently.
This has a much better mechanism for locking a callout to a
cpu and for dealing with synchronous waits for callbacks to
complete.
The IPI busy/wait loop has been removed for remote-cpu operations.
The code now blocks normally and callers will have to understand that.
This will make it a lot easier to debug races.
* Add callout_init_lk() which implements auto-locking similar
to FreeBSD. Several FreeBSD mechanisms already depend on it
and it will make porting easier. And it works pretty well.
* Preparation for a more synchronous interface.
* Note that the new API is roughly similar to the old
except callout_reset() now issues a synchronous stop
instead of an asynchronous stop. Soon we will also
switch around the function names to make MP operation
and synchronous operation the default across the
board.
Sascha Wildner [Mon, 24 Nov 2014 20:45:08 +0000 (21:45 +0100)]
kernel/acpi: Provide a local AcpiOsAllocateZeroed().
François Tigeot [Mon, 24 Nov 2014 16:10:03 +0000 (17:10 +0100)]
drm: Add linux/module.h and linux/moduleparam.h
Obtained-from: FreeBSD/OFED
Sepherosa Ziehau [Mon, 24 Nov 2014 01:16:26 +0000 (09:16 +0800)]
netmsg: ctlinput is proto message not a proto-user message
Sepherosa Ziehau [Mon, 24 Nov 2014 00:03:35 +0000 (08:03 +0800)]
igmp: IGMP processing mpsafe
François Tigeot [Sun, 23 Nov 2014 19:49:32 +0000 (20:49 +0100)]
drm/i915: revert part of "Make the GEM code more Linux-like"
This reverts part of commit
d1c259eee6a290aadce1c78a746e131034aba76a
drm/i915: Make the GEM code more Linux-like
According to issue #2733 this code was causing ring initialization
failures on some machines.
François Tigeot [Sun, 23 Nov 2014 15:32:59 +0000 (16:32 +0100)]
World: Remove the X11BASE variable
Requested-by: marino
Antonio Nikishaev [Sun, 23 Nov 2014 11:23:33 +0000 (15:23 +0400)]
-h (human-readable counters) for netstat
François Tigeot [Sun, 23 Nov 2014 11:41:12 +0000 (12:41 +0100)]
OpenSSH: Correctly set xauth's path (2/2)
X11BASE is used internally by dports and setting it globally
can be dangerous.
Only define this variable in the OpenSSH makefiles.
Robin Hahling [Sat, 22 Nov 2014 11:47:38 +0000 (12:47 +0100)]
service(8): Sync with FreeBSD.
Robin Hahling [Sat, 22 Nov 2014 12:41:09 +0000 (13:41 +0100)]
service(8): Fix error message being displayed when invoking service
service(8) has been imported from FreeBSD. However, DragonFly rc(8) does
not have 'nojail', thus this would have no effect on the call to
rcorder(8).
Robin Hahling [Sat, 22 Nov 2014 12:08:11 +0000 (13:08 +0100)]
rc.subr: Add function to find scripts in local_startup directories
* Add 'find_local_scripts()' function which is useful for
service(8).
* Fix reference to function in service.sh. This fixes two issues in
service(8) for which 'service -e' and 'service -l' would simply fail
to list local startup scripts.
'find_local_scripts()' has been imported from FreeBSD, where it is
called 'find_local_scripts_new()'.
François Tigeot [Sun, 23 Nov 2014 09:23:35 +0000 (10:23 +0100)]
drm: Move intel-gtt.h to include/drm
François Tigeot [Sun, 23 Nov 2014 10:11:42 +0000 (11:11 +0100)]
OpenSSH: Correctly set xauth's path
Revision
111f4c913a18de9586649cc1a374240679ec903a saw the removal
of X11BASE from the tree.
Howewer, it is still required by ssh(1) and sshd(8) to set the
default location of xauth(1).
Put it back but change the value to /usr/local following the change
from pkgsrc to dports.
Sepherosa Ziehau [Sun, 23 Nov 2014 07:50:44 +0000 (15:50 +0800)]
ipdemux: Remove 'direction' parameter
It is no longer needed/used.
Sepherosa Ziehau [Sun, 23 Nov 2014 07:26:14 +0000 (15:26 +0800)]
udp: Don't mess w/ hardware RSS for IP fragments
ip_input() always checks RSS hash value for IP fragments, and there
is better chance that hardware calculates correct RSS hash value for
IP fragments.
Sepherosa Ziehau [Sun, 23 Nov 2014 07:23:13 +0000 (15:23 +0800)]
udp: udp_cport() has already been nuked
Sepherosa Ziehau [Sun, 23 Nov 2014 07:10:10 +0000 (15:10 +0800)]
tcp: Unitfy ctlinput and ctlport cmd/faddr/icmp_ip processing
Sepherosa Ziehau [Sun, 23 Nov 2014 07:06:33 +0000 (15:06 +0800)]
udp: Fix parameter order of udp_addrcpu()
Sepherosa Ziehau [Sun, 23 Nov 2014 05:51:12 +0000 (13:51 +0800)]
udp: Unify ctlinput and ctlport cmd/faddr/icmp_ip processing
Sepherosa Ziehau [Sun, 23 Nov 2014 02:29:54 +0000 (10:29 +0800)]
inpcb: Define inp_notify_t
François Tigeot [Sat, 22 Nov 2014 21:31:42 +0000 (22:31 +0100)]
drm/ttm: glob->lru_lock locking from Linux 3.9.11
Imre Vadasz [Sat, 22 Nov 2014 08:29:49 +0000 (09:29 +0100)]
virtio_pci: Use device_probe_and_attach(), instead of DEVICE_ATTACH().
* By directly calling DEVICE_ATTACH(), we didn't get automatically created
sysctl nodes (added in
8e4d13764bdfc916c23fb22158c65e486dce631c), and
we didn't get automatic dmesg messages on child driver attachement
(e.g. "vtblk0: <VirtIO Block Adapter> on virtio_pci1") .
* Since we have no direct equivalent to FreeBSD's device_attach(), use
device_probe_and_attach(). This means we do a vtpci_set_status() cycle
even if no matching driver is found.
Matthew Dillon [Sat, 22 Nov 2014 08:10:19 +0000 (00:10 -0800)]
kernel - Add lock canceling features
* The current (typically exclusive) lock holder can enable cancel mode
by executing lockmgr(lk, LK_CANCEL_BEG, 0). This call always succeeds.
The lock state is not otherwise affected.
Any current threads blocked on the lock or any future thread which
attempts to gain the lock, who also specify the LK_CANCELABLE flag,
will be canceled as long as cancel mode is active and their operation
will return ENOLCK.
NOTE! Threads which do not specify LK_CANCELABLE are not affected by
cancel mode and their blocking locks will block normally.
WARNING! Cancel mode is not stackable. The system will panic if you
enable cancel mode on a lock where it is already enabled.
* The current (typically exclusive) lock holder can terminate cancel mode
by executing lockmgr(lk, LK_CANCEL_END, 0). This call always succeeds.
Once canceled, any other threads that would block on the lock and specify
the LK_CANCELABLE flag will block normally and not be canceled.
The current lock holder can also terminate cancel mode by simply releasing
the last lock with LK_RELEASE. That is, a release where the lock count
returns to 0.
* Lock canceling is an optional feature. Your lock cannot be canceled unless
you specify LK_CANCELABLE.
Matthew Dillon [Fri, 21 Nov 2014 02:13:10 +0000 (18:13 -0800)]
kernel - Increase default MAXTSIZ from 128M to 256M
* Increase the default max text size from 128m to 256m. Note that this
value can also be overridden in /boot/loader.conf via kern.maxtsiz.
* Currently only chrome compiled w/ full debugging has a text size
which exceeds 128M. The normally compiled chrome is hitting 93MB
though so we might as well up the limit now.
Antonio Huete Jimenez [Thu, 20 Nov 2014 21:33:33 +0000 (22:33 +0100)]
installer: Add an initial testing tool.
- It forks the backend and runs the frontend on the parent
process so all runs in one go.
- The idea is to be able to test certain functions from the
installer without the need to run the whole thing.
- This is just the initial stuff!
Markus Pfeiffer [Thu, 20 Nov 2014 19:55:32 +0000 (19:55 +0000)]
dhclient: Fix a busy loop
The ifi->linkstat variable seemed to be not updated after the poll
returns in dispatch.c. This might only be a hack, but it makes the
busylooping go away.
Sascha Wildner [Thu, 20 Nov 2014 19:09:34 +0000 (20:09 +0100)]
msk.4: Document that MSI is turned off by default.
Matthew Dillon [Thu, 20 Nov 2014 18:58:14 +0000 (10:58 -0800)]
sound/pcm - Attempt to fix 'play interrupt timeout, channel dead' error
* Fix the timeout calculation to properly calculate the buffering
timeout.
* Adjusted code taken from bug 2067 submission.
PR: 2067
Sepherosa Ziehau [Thu, 20 Nov 2014 05:53:28 +0000 (13:53 +0800)]
carp: ctlinput method only processes PRC_IFDOWN and PRC_IFUP
Matthew Dillon [Wed, 19 Nov 2014 19:55:46 +0000 (11:55 -0800)]
kernel - Improve slab cleanup performance
* Convert ZoneAry[], FreeZones, and FreeOVZones from singly linked lists
to doubly linked LISTs. SLZone structure changes size but globaldata
should stay the same.
* Primarily affects slab_cleanup() which appears to be able to eat
an excessive amount of cpu on monster (systems with large amounts
of memory), and may fix a spin lock timeout panic.
* We may need some more work to moderate the amount of time slab_cleanup()
takes.
Antonio Huete Jimenez [Wed, 19 Nov 2014 16:05:15 +0000 (17:05 +0100)]
tools - A bunch of bugfixes for hammer-backup.sh
- Fix a problem when trying to backup / PFS
- Return errors on checksum failure. This can be used by other
scripts to verify the files are not corrupt.
- Force absolute paths to specify which PFS to backup
- Fix a problem with incremental non-compressed backups
- Set a memory limit to xz to avoid massive memory usage
Joris Giovannangeli [Wed, 19 Nov 2014 11:41:32 +0000 (12:41 +0100)]
top: fix per status process count reporting
Sascha Wildner [Tue, 18 Nov 2014 22:46:42 +0000 (23:46 +0100)]
FWIW, bring in FreeBSD's rgephy(4) manual page.
flag0 support has been commented out since I could not find it in our
code.
Sascha Wildner [Tue, 18 Nov 2014 22:38:01 +0000 (23:38 +0100)]
svc.8: Fix a number of references to other manual pages.
Sascha Wildner [Tue, 18 Nov 2014 22:33:00 +0000 (23:33 +0100)]
usbdi.9: Some small fixes.
Sascha Wildner [Tue, 18 Nov 2014 22:30:17 +0000 (23:30 +0100)]
cpuctl.4: Some small fixes.
Antonio Huete Jimenez [Tue, 18 Nov 2014 13:15:49 +0000 (14:15 +0100)]
hammer - Better trailing '/' handling on PFS paths
- Remove all trailing slashes from PFS paths to make sure
there are no problems when performing operations on them.
Sascha Wildner [Tue, 18 Nov 2014 22:23:52 +0000 (23:23 +0100)]
vn_lock.9: Capitalize .Dt
Sascha Wildner [Tue, 18 Nov 2014 21:38:11 +0000 (22:38 +0100)]
cpuctl: Fix path in 'files'.
François Tigeot [Tue, 18 Nov 2014 21:18:03 +0000 (22:18 +0100)]
drm: Use lockmgr locks with Linux wait queues
* On Linux, it is possible to grab a second spinlock in an already
spinlock-protected code section.
* The wait_event() macro is used in such a situation in the i915 driver.
One of the event checks itself tries to grab a second lock. What's more,
this second lock is a lockmgr lock in the DragonFly kernel. This results
in the following situation:
spinlock
lockmgr LK_EXCLUSIVE
spinunlock
* Unfortunately if the lockmgr lock can't be acquired, the thread is put
to sleep and a thread sleeping with a spinlock held leads to a general
system freeze or a kernel panic.
* For that reason, we can't use a spinlock in Linux wait queues. Change
the internal wait_queue_head_t lock to a lockmgr lock.
Thanks go to Imre Vadász for spotting this horrible issue.
Joris Giovannangeli [Tue, 18 Nov 2014 20:49:21 +0000 (21:49 +0100)]
Import cpuctl pseudo device from FreeBSD
The cpuctl pseudo device allows to perform cpu microcode updates.
Thomas Nikolajsen [Tue, 18 Nov 2014 21:06:22 +0000 (22:06 +0100)]
loader: Fix XHCI description in help.common
Thomas Nikolajsen [Tue, 18 Nov 2014 19:46:14 +0000 (20:46 +0100)]
loader: Fix typos in help.common
- ahci(4) doesn't use .0 for disable hint
- fix slice name in example
Imre Vadasz [Sat, 15 Nov 2014 15:59:06 +0000 (16:59 +0100)]
drm: Make wait_event_interruptible interruptible and fix its return value.
* __wait_event_common now works like wait_event_interruptible_timeout does
in Linux.
* wait_event_interruptible uses different return values than the other
wait_event variants.
* translate -ERESTARTSYS to -EINTR in two obvious places in radeon_gem.c,
before returning from an ioctl handler.
Sascha Wildner [Tue, 18 Nov 2014 11:53:37 +0000 (12:53 +0100)]
VOP_OPENCLOSE.9: Fix a reference.
Sascha Wildner [Tue, 18 Nov 2014 11:53:00 +0000 (12:53 +0100)]
vn_lock.9: Some small cleanup.
Sepherosa Ziehau [Tue, 18 Nov 2014 07:07:06 +0000 (15:07 +0800)]
udp: Minor udp_ctlinput cleanup
Sepherosa Ziehau [Tue, 18 Nov 2014 06:58:31 +0000 (14:58 +0800)]
tcp: Minor tcp_ctlinput cleanup
- Remove unnecessary crit section
- Const-fy
Sepherosa Ziehau [Tue, 18 Nov 2014 06:27:37 +0000 (14:27 +0800)]
tcp: Discard non-error cmd after PRC_IS_REDIRECT(cmd) test
Original code actually ignores all ICMP redirects.
Sascha Wildner [Mon, 17 Nov 2014 23:42:19 +0000 (00:42 +0100)]
man9: Fix Makefile sorting.
Antonio Huete Jimenez [Mon, 17 Nov 2014 22:23:59 +0000 (23:23 +0100)]
manpages: Forgot to hook vn_lock.9 into the build.
Antonio Huete Jimenez [Mon, 17 Nov 2014 22:17:03 +0000 (23:17 +0100)]
manpages: Add an updated version of vn_lock.9
Antonio Huete Jimenez [Sat, 15 Nov 2014 17:33:28 +0000 (18:33 +0100)]
manpages: VFS Compat API manpage update.
- Reflect a bit better what's on the current codebase with
regards to the old VFS API, which is still in use for many
filesystems.
- Pseudocode present on the old API manpages has been removed.
In-discussion with: swildner
Robin Hahling [Mon, 17 Nov 2014 15:53:22 +0000 (16:53 +0100)]
rcrun(8): Add rcstatus command to show the status of a rc script
* Add rcrun status, and its shortcut rcstatus, to show the status of a
rc script.
* Update rcrun(8) manual page entry to reflect the change.
Robin Hahling [Mon, 17 Nov 2014 07:14:42 +0000 (08:14 +0100)]
camcontrol(8): update usage() for the new 'devlist -b' flag
Sepherosa Ziehau [Mon, 17 Nov 2014 06:42:39 +0000 (14:42 +0800)]
icmp: Don't convert saved ip header's length into host byte order
No kernel code depends on this and it actually whacks the icmp header
passed to userland through SOCK_RAW socket. ICMP redirect processing
does not need fix (it does not do the convertion).
Sepherosa Ziehau [Mon, 17 Nov 2014 06:22:33 +0000 (14:22 +0800)]
icmp: Fix wrong icmp header cast
This was introduced by
efa391c40c414e7071b2041f1888180deb1806b9
Peter Avalos [Sun, 31 Aug 2014 14:33:15 +0000 (07:33 -0700)]
rc.subr: Add required_modules processing.
This will kldload appropriate modules, needed by some dports (e.g.
openvpn).
Obtained-from: FreeBSD
Sepherosa Ziehau [Mon, 17 Nov 2014 01:38:17 +0000 (09:38 +0800)]
icmp: Use inet_ntop() to log ip addresses
Sepherosa Ziehau [Mon, 17 Nov 2014 00:52:52 +0000 (08:52 +0800)]
proto: ctlinput is a pr method; not a pru method
François Tigeot [Sun, 16 Nov 2014 22:14:17 +0000 (23:14 +0100)]
drm: Use the ERESTARTSYS error code
* Linux kernel functions can return -ERESTARTSYS in some cases, a
negative value indicating an error (typically -512)
* Howewer, ERESTARTSYS was previously as ERESTART, itself defined
as -1 in *BSD kernels
* The -ERESTARTSYS return value thus was positive on the DragonFly
kernel, potentially breaking various drm error checks.
* Fix this issue by defining ERESTARTSYS separately
Thanks-to: Imre Vadasz for discovering the original problem
François Tigeot [Sun, 16 Nov 2014 21:20:18 +0000 (22:20 +0100)]
drm: Add linux/mm.h
Obtained-from: FreeBSD's OFED framework
Robin Hahling [Sun, 16 Nov 2014 21:04:15 +0000 (22:04 +0100)]
camcontrol(8): Add '-b' flag to 'camcontrol devlist'
This prints only the existing buses and their parent sims, useful for
creating a sim->bus->device map.
Taken-from: FreeBSD
Robin Hahling [Sun, 16 Nov 2014 19:11:36 +0000 (20:11 +0100)]
patch(1): Add dry-run alias for compatibility with other implementations
Other implementations of patch(1), including GNU patch, "svn patch" and
FreeBSD patch have a --dry-run option which does the same as our -C or
--check option.
Add --dry-run alias to increase compatibility.
Taken-from: FreeBSD
François Tigeot [Sun, 16 Nov 2014 17:29:44 +0000 (18:29 +0100)]
drm/radeon: Replace some custom code by Linux wait queues
François Tigeot [Sun, 16 Nov 2014 17:09:45 +0000 (18:09 +0100)]
drm/ttm: Fix ttm_bo_wait_unreserved()
By using the wait event API and code from Linux 3.8.13
The old implementation of this function had a tendency to wrongly
go to an uninterruptible sleep state.
François Tigeot [Sun, 16 Nov 2014 11:35:45 +0000 (12:35 +0100)]
sysctl: Give each device its own context and subtree
* Add device_get_sysctl_ctx() and device_get_sysctl_tree() functions
* All devices now have an associated sysctl tree under the "dev" root
Obtained-from: FreeBSD
Robin Hahling [Sun, 16 Nov 2014 10:13:01 +0000 (11:13 +0100)]
newsyslog(8): use the size of the file instead of the blocks...
... it takes on disk, as advertised in newsyslog.conf(5).
Taken-from: FreeBSD
François Tigeot [Sat, 15 Nov 2014 10:13:08 +0000 (11:13 +0100)]
drm: Change sruct drm_local_map
Make it identical to the version from Linux 3.8.13.
Sepherosa Ziehau [Sun, 16 Nov 2014 08:32:19 +0000 (16:32 +0800)]
icmp: Use inet_ntop() instead of inet_ntoa()
Sepherosa Ziehau [Sun, 16 Nov 2014 07:56:01 +0000 (15:56 +0800)]
build: Add ICMPPRINTFS as global option
Sepherosa Ziehau [Sun, 16 Nov 2014 06:33:42 +0000 (14:33 +0800)]
libkern: Add inet_ntop()
Taken-from: FreeBSD r213103
Sepherosa Ziehau [Sun, 16 Nov 2014 05:55:13 +0000 (13:55 +0800)]
icmp: Utilize in_cksum_skip()
This avoids unnecessary m_data and m_len adjustment before and after
in_cksum().
Sepherosa Ziehau [Sun, 16 Nov 2014 05:40:01 +0000 (13:40 +0800)]
incsum: Const-fy mbuf parameter
Sepherosa Ziehau [Sun, 16 Nov 2014 04:08:54 +0000 (12:08 +0800)]
uipc: Remove never used last pr entry of localdomain
Sascha Wildner [Sat, 15 Nov 2014 22:31:48 +0000 (23:31 +0100)]
kernel/netgraph7: Port the kernel part of the netgraph7 bluetooth stack.
It still needs more testing/debugging, along with the userland part.
In-discussion-with: nant
François Tigeot [Sat, 15 Nov 2014 20:23:12 +0000 (21:23 +0100)]
drm: Rename drm_os_freebsd.h to drm_os_linux.h
Move DRM_READ() and DRM_WRITE() macros to the new file
Robin Hahling [Sat, 15 Nov 2014 18:57:37 +0000 (19:57 +0100)]
date(1): Add "-R" flag to use RFC 2822 date and time output format
As stated in the man page, this is equivalent to use
"%a, %d %b %Y %T %z" as the output format while LC_TIME is set to the
"C" locale.
This is compatible with date(1) from the GNU core utilities.
Taken-from: FreeBSD
While here, remove $DragonFly$ line from man page.
François Tigeot [Sat, 15 Nov 2014 17:46:18 +0000 (18:46 +0100)]
drm: linux/io.h is really asm/io.h, rename it
While there, also add ioremap() and ioremap_wc() to the new file
Sascha Wildner [Sat, 15 Nov 2014 16:50:05 +0000 (17:50 +0100)]
kernel/usb4bsd: Bring in the axge(4) ethernet driver.
It supports USB Gigabit Ethernet adapters based on the
ASIX Electronics AX88179 USB 3.0 and AX88178A USB 2.0
chipsets.
Taken-from: FreeBSD
Sascha Wildner [Sat, 15 Nov 2014 12:51:20 +0000 (13:51 +0100)]
kernel: Add snd_uaudio(4) to LINT.