Sascha Wildner [Fri, 29 Dec 2006 00:10:35 +0000 (00:10 +0000)]
syscons doesn't support EGA, CGA etc. anymore, so remove the mapping
of generic mode names like "80x25" to different adapter types. Hardwire
them to VGA/VESA mode numbers.
Also, remove the bogus "132x30" VESA text mode which is not defined in
the specification.
Matthew Dillon [Thu, 28 Dec 2006 21:24:02 +0000 (21:24 +0000)]
Make kernel_map, buffer_map, clean_map, exec_map, and pager_map direct
structural declarations instead of pointers. Clean up all related code,
in particular kmem_suballoc().
Remove the offset calculation for kernel_object. kernel_object's page
indices used to be relative to the start of kernel virtual memory in order
to improve the performance of VM page scanning algorithms. The optimization
is no longer needed now that VM objects use Red-Black trees. Removal of
the offset simplifies a number of calculations and makes the code more
readable.
Matthew Dillon [Thu, 28 Dec 2006 18:29:08 +0000 (18:29 +0000)]
Introduce globals: KvaStart, KvaEnd, and KvaSize. Used by the kernel
instead of the nutty VADDR and VM_*_KERNEL_ADDRESS macros. Move extern
declarations for these variables as well as for virtual_start, virtual_end,
and phys_avail[] from MD headers to MI headers.
Make kernel_object a global structure instead of a pointer.
Remove kmem_object and all related code (none of it is used any more).
Simon Schubert [Wed, 27 Dec 2006 23:06:29 +0000 (23:06 +0000)]
clean to WARNS=6.
Simon Schubert [Wed, 27 Dec 2006 23:01:19 +0000 (23:01 +0000)]
Janitor out stale defines and ifdefs.
Peter Avalos [Wed, 27 Dec 2006 21:29:02 +0000 (21:29 +0000)]
Sync with FreeBSD. Notable changes:
Kill extraneous whitespace.
Flush streams before calling system() so that the output appears in the
right place in the output stream when redirected to a file (when full
buffering is enabled).
Store a pointer to "null" in struct ndblock's defn member instead of a
duplicate allocated on the heap; the address defn points to is significant,
and is checked against the address of "null" in certain conditionals.
Fix m4 to properly handle bitwise operators &, ^, and |. Fix operator
precedence. Add short-circuit evaluation.
Respect locale settings from the environment.
Add a new m4 script to test the functionality of math operators in eval().
Sascha Wildner [Wed, 27 Dec 2006 21:15:38 +0000 (21:15 +0000)]
Don't interpret 'Dx' as a macro name.
Spotted-by: corecode
Matthew Dillon [Wed, 27 Dec 2006 20:43:09 +0000 (20:43 +0000)]
Make certain libc prototypes / system calls visible to kernel builds
(for virtual kernel builds). Add a TLS support function for virtual
kernels.
Matthew Dillon [Wed, 27 Dec 2006 20:41:59 +0000 (20:41 +0000)]
Make a chunk of low level initialization code for proc0 and thread0 machine
independant via a new procedure, mi_proc0init().
Sascha Wildner [Wed, 27 Dec 2006 18:37:15 +0000 (18:37 +0000)]
printf -> kprintf
Thomas E. Spanjaard [Wed, 27 Dec 2006 17:20:28 +0000 (17:20 +0000)]
Add generic printout of extended CPUID feature flags on Intel processors.
Obtained-from: FreeBSD.
XXX-regarding: cpu_feature and cpu_feature2 flags are defined in
sys/systm.h, which really isn't the right place.
Matthew Dillon [Wed, 27 Dec 2006 06:51:47 +0000 (06:51 +0000)]
Remove unused defines.
Matthew Dillon [Tue, 26 Dec 2006 22:51:00 +0000 (22:51 +0000)]
Rename virtual_avail to virtual_start, so name follows function.
Matthew Dillon [Tue, 26 Dec 2006 20:46:15 +0000 (20:46 +0000)]
Continue fleshing out VKERNEL support. Initialize the per-cpu globaldata
structure, provide access to the structure via %gs, and do some minor
cleanups.
Matthew Dillon [Tue, 26 Dec 2006 20:43:56 +0000 (20:43 +0000)]
Remove unused procedures and declarations.
Sepherosa Ziehau [Tue, 26 Dec 2006 14:53:21 +0000 (14:53 +0000)]
Use a temporary rate set to hold current channel's rate set.
The rates in the temporary rate set will have their MSB cleared.
The main reason that we do this is to be compatible with some
AP implementations, that check MSB of supported rate octet in
(Extended) Supported Rates ie of probe requests. If the checking
fails on AP side, these implementations will not send out probe
responses.
This kind of rate checking is against:
- IEEE Std 802.11, 1999 edition subclause 7.3.2.2
- IEEE Std 802.11g-2003 subclause 7.3.2.14
Sepherosa Ziehau [Tue, 26 Dec 2006 12:41:40 +0000 (12:41 +0000)]
Use software beacon missing handling
Sepherosa Ziehau [Tue, 26 Dec 2006 12:16:56 +0000 (12:16 +0000)]
hw.machine_cpu should use content in machine_cpu[] array.
OK: dillon@
Sepherosa Ziehau [Tue, 26 Dec 2006 11:27:44 +0000 (11:27 +0000)]
- Unhook usr.bin/uname from boot strap tools building, because it is not
used as boot strap tool at all.
- Add hw.machin_uname, which is "i386" on pc32(machine)/i386(cpu). It is
used by uname(1) -m option and uname(3), since most third party application
understand "i386" much better than "pc32". In uname(3), fallback to
hw.machine, if hw.machine_uname does not exist, so we can stay compatible
with old kernel which does not have hw.machine_uname.
Implementation-suggestions-from: dillon@
Approved-by: dillon@
Sascha Wildner [Tue, 26 Dec 2006 11:01:07 +0000 (11:01 +0000)]
- addlog(...) is identical to log(-1, ...). Get rid of it to avoid
duplicate code and change sppp(4) to use log(-1, ...).
- Add support for the 'j' and 't' size modifiers.
- Add support for the 'i' (alias for 'd'), 'n' and 'X' conversions. Use
uintmax_t in ksprintn() and get rid of ksprintqn(). Do some structural
cleanup in kvcprintf().
- Make 'z' modifier always print values as signed.
- Change a return to a break to properly free the local buffers.
- When padding with zero, do pad after prefixes rather than before.
- Perform some style(9) cleanup.
Taken-from (with some adjustments): FreeBSD
Sascha Wildner [Tue, 26 Dec 2006 03:38:50 +0000 (03:38 +0000)]
Remove unnecessary argument to .Nm.
Sepherosa Ziehau [Mon, 25 Dec 2006 14:45:33 +0000 (14:45 +0000)]
Sync ieee80211_radiotap(9) manpage with NetBSD (mainly dyoung@netbsd.org)
Sepherosa Ziehau [Mon, 25 Dec 2006 14:42:36 +0000 (14:42 +0000)]
- Fix some comment.
- Add a note that radiotap fields are little-endian.
- Nuke comment about IEEE80211_RADIOTAP_FCS, because it wasn't adopted.
Obtained-from: NetBSD (dyoung@netbsd.org)
Sepherosa Ziehau [Mon, 25 Dec 2006 14:05:40 +0000 (14:05 +0000)]
regen
Sepherosa Ziehau [Mon, 25 Dec 2006 14:04:58 +0000 (14:04 +0000)]
Add PCI ids for Broadcom BCM430x/BCM4318 wireless NICs
Sepherosa Ziehau [Mon, 25 Dec 2006 12:19:10 +0000 (12:19 +0000)]
acx(4) firmware can't handle beacon missing, use software beacon missing
processing instead.
Peter Avalos [Mon, 25 Dec 2006 02:39:29 +0000 (02:39 +0000)]
Add a note that ndp(8) uses these sources.
Peter Avalos [Mon, 25 Dec 2006 02:37:09 +0000 (02:37 +0000)]
Upgrade to tcpdump-3.9.5.
Peter Avalos [Mon, 25 Dec 2006 00:42:01 +0000 (00:42 +0000)]
Upgrade to libpcap-0.9.5 and tcpdump-3.9.5.
Peter Avalos [Mon, 25 Dec 2006 00:32:20 +0000 (00:32 +0000)]
Merge from vendor branch LIBPCAP:
Import LIBPCAP 0.9.5
Peter Avalos [Mon, 25 Dec 2006 00:32:20 +0000 (00:32 +0000)]
Import LIBPCAP 0.9.5
Peter Avalos [Mon, 25 Dec 2006 00:17:50 +0000 (00:17 +0000)]
Merge from vendor branch TCPDUMP:
Import of TCPDUMP 3.9.5
Peter Avalos [Mon, 25 Dec 2006 00:17:50 +0000 (00:17 +0000)]
Import of TCPDUMP 3.9.5
Sepherosa Ziehau [Sun, 24 Dec 2006 11:39:59 +0000 (11:39 +0000)]
Restart TX rate control algorithm for a peer node, if its current TX
rate index is beyond the number of TX rates it supports.
This could happen at least in following way:
1) Start a 11g HOSTAP, which uses TX rate control algorithm
2) Use a 11g cardbus wireless card as STA, set its mode to "auto" or
"11g" and join the BSS created by HOSTAP
3) Transmit some packets from HOSTAP to STA and make sure that TX rate
index for the STA reaches maximum.
4) Unplug the cardbus wireless card, so it has no chance to send out
disassociation management frame.
5) Plug the cardbus wireless card back immediately, set its mode to
"11b" and join the BSS created by HOSTAP again.
Sepherosa Ziehau [Sun, 24 Dec 2006 05:50:11 +0000 (05:50 +0000)]
List more RT2501USB/RT2601USB devices in rum(4) manpage.
Obtained-from: OpenBSD
Sepherosa Ziehau [Sun, 24 Dec 2006 05:44:36 +0000 (05:44 +0000)]
List more RT2500USB devices in ural(4) manpage
Obtained-from: OpenBSD
Sepherosa Ziehau [Sun, 24 Dec 2006 05:18:22 +0000 (05:18 +0000)]
Add more ids for RT2500USB.
Obtained-from: OpenBSD
Sepherosa Ziehau [Sun, 24 Dec 2006 05:17:16 +0000 (05:17 +0000)]
regen
Sepherosa Ziehau [Sun, 24 Dec 2006 05:16:43 +0000 (05:16 +0000)]
Add more ids for RT2500USB.
Obtained-from: OpenBSD
Sepherosa Ziehau [Sun, 24 Dec 2006 05:01:07 +0000 (05:01 +0000)]
Mention MCP67 in nfe(4) manpage
Sepherosa Ziehau [Sun, 24 Dec 2006 04:58:27 +0000 (04:58 +0000)]
Add NVIDIA MCP67 LAN support.
Obtained-from: OpenBSD
Sepherosa Ziehau [Sun, 24 Dec 2006 04:57:13 +0000 (04:57 +0000)]
regen
Sepherosa Ziehau [Sun, 24 Dec 2006 04:56:37 +0000 (04:56 +0000)]
Add NVIDIA MCP67 Lan PCI ids.
Sepherosa Ziehau [Sun, 24 Dec 2006 03:30:56 +0000 (03:30 +0000)]
Add more chip id for fxp(4)
Obtained-from: FreeBSD
Sascha Wildner [Sat, 23 Dec 2006 23:47:54 +0000 (23:47 +0000)]
Ansify function declarations and fix some minor style issues.
In-collaboration-with: Alexey Slynko <slynko@tronet.ru>
Sascha Wildner [Sat, 23 Dec 2006 20:05:34 +0000 (20:05 +0000)]
Remove printf() definition and prototype from the kernel.
Sepherosa Ziehau [Sat, 23 Dec 2006 10:42:29 +0000 (10:42 +0000)]
Sync em(4) manpage with the one in Intel em 6.2.9
Sepherosa Ziehau [Sat, 23 Dec 2006 10:39:16 +0000 (10:39 +0000)]
Sync with Intel's em-6.2.9
- Support more chips.
- Implement suspend/resume device methods.
- Correct promisc mode support.
- Code and comment clean up.
- Avoid reinitializing the hardware if only IP address is changed. This is
implemented in a different way from Intel's:
If IFF_RUNNING is set, em_init() will return immediately. So for some
situation in which em_init() must run, IFF_RUNNING is cleared before calling
em_init().
- Rework TX processing:
In em_encap(), save the index of the packet's last TX descriptor (EOP) in
the packet's first descriptor. In em_txeof(), test E1000_TXD_STAT_DD bit
only for last TX descriptor (EOP) of certain packet. If it is set, then
reap the TX descriptors of the packet in an inner loop.
"This change is important for future chips, where DD bit is going
to be set only on the EOP descriptors." -- Jack Vogel at Intel
Sepherosa Ziehau [Sat, 23 Dec 2006 09:44:26 +0000 (09:44 +0000)]
- Replace magic number with macro.
- In iwi_auth_and_assoc(), add assertion before the questionable memcpy().
After recent bug fixing in 802.11 layer, this assertion should not fail.
Sepherosa Ziehau [Sat, 23 Dec 2006 09:26:23 +0000 (09:26 +0000)]
Since all necessary bits are in 802_11 layer now:
- Properly set basic rate set and operational rate set for acx100 part.
- Properly set basic rate set for acx111 part.
- More strigent rate checking
Sepherosa Ziehau [Sat, 23 Dec 2006 09:14:02 +0000 (09:14 +0000)]
Massive 802_11 XRATE bug fixing.
- Correct ieee80211_fix_rate(IEEE80211_F_DODEL) operation by entering
IEEE80211_F_DONEGO code segment but avoiding real negotiation.
- In ieee80211_fix_rate(), remove duplicated rates if rate set is to
be sorted. This should be enough to protect us against maliciously
minted 802.11 management frames which contain supported rate and
extended supported rate ies. [*]
- In ieee80211_sta_join(), call ieee80211_fix_rate(IEEE80211_F_DODEL),
if the wireless NIC operates in STA mode. So drivers can depend on
ieee80211com.ic_bss's ni_rates even before entering RUN state, this
is *very important* for certain driver e.g. iwi(4) [*].
- Add ic_nbasicrates in ieee80211com, which records the number of
basic rates in the current BSS. [1]
- Add a new function ieee80211_copy_basicrates(). This function is
used to propagate IEEE80211_RATE_BASIC bit from second parameter
to the first parameter. It will return number of basic rates in
the second parameter. It is called in ieee80211_sta_join() to
properly setup basic rates in ieee80211com.ic_sup_rates and
ieee80211com.ic_nbasicrates. [2]
- Introduce extra parameter to ieee80211_setup_rates() and
ieee80211_fix_rate().
This parameter only affects how IEEE80211_F_DONEGO is done.
Adjust IEEE80211_F_DONEGO behavior after introducing this parameter:
If the new parameter is 1, then the negotiation is performed on the
behalf of a STA which wants to join either an infrastructured or an
independent BSS, and the rate set going to be negotiated is the BSS's
supported rate set:
o Don't overwrite the BSS basic rate set. So drivers and TX rate
control algorithm can have knowledge of the BSS basic rate set and
can do various setting accordingly.
o Avoid joining the BSS, if certain rates in the BSS basic rate set
are not supported.
If the new parameter is 0, then the negotiation is performed on the
behalf of a HOSTAP, or a STA that already joined/started an independent
BSS, and the rate set going to be negotiated is peer STA's supported
rate set:
o Overwrite the basic rates of peer STA's supported rate set with
basic rates in ieee80211com.ic_sup_rates, which is set up properly
in ieee80211_sta_join() by ieee80211_copy_basicrates() (see [2]),
so TX rate control algorithm can act accordingly.
o If the current operation mode is IEEE80211_M_HOSTAP, use a counter
to bookkeep how many basic rates got overwritten during negotiation.
If at the end of the negotiation the counter is less than
ieee80211com.ic_nbasicrates (see [1] and [2]), then it means that
the peer STA does not support certain rates in our basic rate set.
This kind of STA should not be allowed to join the current BSS.
This prevention mechanism should be more straightforword than the
old one in ieee80211_recv_mgmt(), nuke the old prevention mechanism
after this change.
- In ieee80211_init_neighbor(), do full rate set negotiation, so nodes
created by ieee80211_add_neighbor() or ieee80211_fakeup_adhoc_node(),
will not contain rates that the wireless NIC does not support.
- In ieee80211_{beacon,probe_resp}_alloc(), use ieee80211com.ic_sup_rates
to setup supported rates and extended supported rates ie, instead of
using ieee80211com.ic_bss's ni_rates. So two 11g STAs in a 11g/11b
mixed IBSS can comunicate with each other using OFDM rates, given proper
protection, like RTS-CTS/CTS-to-self, is applied. [**]
- In ieee80211_send_mgmt(), use ieee80211com.ic_sup_rates to create
supported rates and extended supported rates ie of (re)association
response. So these ies are consistent with what's in beacon and probe
response. [**]
- In ieee80211_send_mgmt(), use ieee80211_probe_resp_alloc() to create
frame body of probe response.
- Add more XRATE debug messages.
#
# [*] Details:
# http://lists.freebsd.org/pipermail/freebsd-current/2006-October/066679.html
#
# [**] Basic rates in ieee80211com.ic_sup_rates are set beforehand (see [2])
#
Sepherosa Ziehau [Sat, 23 Dec 2006 03:41:55 +0000 (03:41 +0000)]
- Don't call m_adj() to make RX buffer's _payload_ on longword aligned,
because some re(4) chips (e.g. RTL8101E) require RX buffer to be
8-bytes aligned. This change shows no noticeable performance change.
Reported-by: Joe Talbott <josepht@cstone.net>
- Avoid writing extra hardware registers by writing 2 bytes to IDR4
instead instead of writing 4 bytes, bacause:
1) the extra two registers after IDR5 are reserved.
2) accessing arpcom.ac_enaddr[6,7] should be invalid.
- Add a flag field in re_softc and re_hwrev. Currently only one flag,
RE_F_HASMPC, is defined. This flag is used to indicate whether the
hardware has MPC register or not, so we can avoid writing to MPC's
position, if that position is reserved.
- Move descriptor ring address setting up before RX/TX enabling, since
some re(4) chips (e.g. RTL8101E) will try accessing descriptor ring
immediately after RX/TX is enabled, which results in intermittent
kernel panic or system hanging.
Paniced-by: Joe Talbott <josepht@cstone.net>
- Avoid calling re_init(), if hw.reX.tx_moderation is changed but NIC
is not up yet.
- Const-fy global hardware id arrays and nuke unused macro while I'm here.
Thank Joe Talbott <josepht@cstone.net> to help debugging and provide
valuable information (esp. locating the problematic RX/TX enabling :)
Thank dillon@ to provide debugging hints.
Tested-by:
Joe Talbott <josepht@cstone.net> (RTL8101E)
swildner@ (onboard RTL8169S) (*)
me (RTL8169S)
# (*) swildner@'s card is still half broken even after this commit :\
Sascha Wildner [Sat, 23 Dec 2006 02:58:09 +0000 (02:58 +0000)]
Remove an #ifdef _KERNEL inside an #ifdef _KERNEL.
Sascha Wildner [Sat, 23 Dec 2006 00:41:31 +0000 (00:41 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Sat, 23 Dec 2006 00:35:05 +0000 (00:35 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Sat, 23 Dec 2006 00:27:03 +0000 (00:27 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Fri, 22 Dec 2006 23:57:54 +0000 (23:57 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Fri, 22 Dec 2006 23:44:57 +0000 (23:44 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Fri, 22 Dec 2006 23:26:27 +0000 (23:26 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Fri, 22 Dec 2006 23:12:17 +0000 (23:12 +0000)]
Rename printf -> kprintf in sys/ and add some defines where necessary
(files which are used in userland, too).
Sascha Wildner [Fri, 22 Dec 2006 08:08:25 +0000 (08:08 +0000)]
Define kvsnprintf as vsnprintf for the case where subr_sbuf.c is compiled
as libsbuf.
Spotted-by: Trevor Kendall <trevorjkendall@gmail.com>
Sepherosa Ziehau [Thu, 21 Dec 2006 14:13:04 +0000 (14:13 +0000)]
- Use jumbo buffers only when MTU > 1518 bytes.
o In sk_dma_alloc(), allocate additional DMA stuffs for normal mbuf cluster
to use.
o In sk_init(), set sk_if_softc.sk_use_jumbo if ifnet.if_mtu > 1518. This
should only be done after sk_stop(), so sk_stop() will not free wrong RX
buffers. Add a comment about it.
o Don't touch jumbo buffer related bits in hardware registers, if jumbo
buffer is not used currently.
o Rename old sk_newbuf() to sk_newbuf_jumbo().
o Implement sk_newbuf_std(), which allocates RX buffer using mbuf clusters.
o Add a wrapper function, sk_newbuf(), to switch between above two functions
based on whether sk_if_softc.sk_use_jumbo is set or not.
- If something fail in sk_rxeof(), don't call sk_newbuf() with old mbuf:
Hardware will not change RX descriptor's buffer address part. Only
controlling bits of the RX descriptor need to be set up properly.
Nuke third parameter (i.e. mbuf) of sk_newbuf() after this change and
rearrange sk_newbuf_jumbo() accordingly.
- Since sk_chain and TX/RX descriptor use same index, nuke unnecessary
sk_chain.sk_desc field, which points to a corresponding TX/RX descriptor.
Pass the TX/RX descriptor index to sk_newbuf() instead of sk_chain pointer.
Nuke never used sk_chain.sk_next field. These changes degenarate sk_chain
into a mbuf pointer, so nuke no longer needed sk_chain structure.
Tested-by: Rumko <rumcic@gmail.com> and Gergo Szakal <bastyaelvtars@gmail.com>
Partially-reviewed-by: dillon@
Thomas E. Spanjaard [Wed, 20 Dec 2006 23:29:18 +0000 (23:29 +0000)]
Add the PCI_MAP_FIXUP code as proposed two weeks ago. The code is only
enabled with options PCI_MAP_FIXUP in your kernel, and should only be used
when using nata.
Matthew Dillon [Wed, 20 Dec 2006 18:14:44 +0000 (18:14 +0000)]
Rename sprintf -> ksprintf
Rename snprintf -> knsprintf
Make allowances for source files that are compiled for both userland and
the kernel.
Matthew Dillon [Tue, 19 Dec 2006 00:11:13 +0000 (00:11 +0000)]
Add IFF_MONITOR support.
Submitted-by: "Vlad Galu" <dudu@dudu.ro>
Obtained-from: FreeBSD
Peter Avalos [Mon, 18 Dec 2006 23:26:36 +0000 (23:26 +0000)]
See whether we should compile ipfilter with INET6 support by looking at the
kernel config rather than requiring the user to use an undocumented build
option.
Thanks to corecode, TGEN, and vbd for various suggestions and Max Herrgard
<herrgard@gmail.com> for testing.
Dragonfly-bug: <http://bugs.dragonflybsd.org/issue322>
Reviewed-by: vbd
Matthew Dillon [Mon, 18 Dec 2006 23:12:31 +0000 (23:12 +0000)]
Undo some renames that don't apply to the boot code (linked against libstand).
Matthew Dillon [Mon, 18 Dec 2006 21:02:59 +0000 (21:02 +0000)]
Add 'k' versions for printf, sprintf, and snprintf. kprintf, ksprintf, and
ksnprintf. This will allow these functions to be renamed piecemeal without
breaking the source tree.
Matthew Dillon [Mon, 18 Dec 2006 20:41:02 +0000 (20:41 +0000)]
Rename kvprintf -> kvcprintf (call-back version)
Rename vprintf -> kvprintf
Rename vsprintf -> kvsprintf
Rename vsnprintf -> kvsnprintf
Matthew Dillon [Mon, 18 Dec 2006 19:44:51 +0000 (19:44 +0000)]
Add a prototype for the new mcontrol() system call.
Matthew Dillon [Sun, 17 Dec 2006 20:07:33 +0000 (20:07 +0000)]
Repo copy machine/pc32/i386/mem.c to kern/kern_memio.c and separate out
the (few) machine-dependant parts. This file primarily controls access
to /dev/zero, /dev/null, /dev/random, and kernel memory, and does not belong
in a machine-dependant directory.
Matthew Dillon [Sun, 17 Dec 2006 19:28:32 +0000 (19:28 +0000)]
Pass NULL to objcache_create() to indicate that null_ctor() and/or null_dtor()
should be used. Make null_ctor() and null_dtor() private functions.
Disallow M_ZERO entirely, it doesn't really fit the objcache model.
With-input-from: "Simon 'corecode' Schubert" <corecode@fs.ei.tum.de>,
"Thomas E. Spanjaard" <tgen@netphreax.net>,
Jeffrey Hsu <hsu@crater.dragonflybsd.org>
Sepherosa Ziehau [Fri, 15 Dec 2006 12:44:23 +0000 (12:44 +0000)]
- Factor out ieee80211_print_rateset().
- Add a debug macro: IEEE80211_PRINT_NODERATES(). Replace two almost same
debug code segments with it.
Sascha Wildner [Thu, 14 Dec 2006 16:21:34 +0000 (16:21 +0000)]
Add a manual page for umct(4).
Sascha Wildner [Thu, 14 Dec 2006 16:20:22 +0000 (16:20 +0000)]
Make umct compilable into the kernel and add it to LINT.
Sascha Wildner [Thu, 14 Dec 2006 16:18:04 +0000 (16:18 +0000)]
Fix a typo (found in FreeBSD) and update CVS tag.
Thomas E. Spanjaard [Thu, 14 Dec 2006 16:06:40 +0000 (16:06 +0000)]
There is no "atapi-all.h" anymore. Remove reference to it from atapi-cam.c.
Matthew Dillon [Wed, 13 Dec 2006 21:58:52 +0000 (21:58 +0000)]
rename sscanf -> ksscanf
rename vsscanf -> kvsscanf
rename fnmatch -> kfnmatch
rename qsort -> kqsort
Matthew Dillon [Wed, 13 Dec 2006 20:19:06 +0000 (20:19 +0000)]
Fix umct and add F5U409 USB Serial Adaptor.
Submitted-by: Joe Talbott <josepht@cstone.net>
Thomas E. Spanjaard [Wed, 13 Dec 2006 19:39:52 +0000 (19:39 +0000)]
Have the genassym.o target depend on forwarding-headers. This unbreaks
parallel kernel builds.
YONETANI Tomokazu [Wed, 13 Dec 2006 15:29:50 +0000 (15:29 +0000)]
${_LHDRS} must succeed ${_MACHINE_FWD}/include/machine, which creates
${_MACHINE_FWD}/include, in which ${_LHDRS} target creates some headers.
Reported-by: tgen@
Thomas E. Spanjaard [Wed, 13 Dec 2006 14:48:26 +0000 (14:48 +0000)]
Modify the device description for the standard nForce and nForce2 on-chip
ethernet controllers to Fast Ethernet. Only the last one or two models of
the nForce2 (Ultra 400Gb and possibly Ultra 400R) supported a gmiibus.
Also add a comment regarding PCI_PRODUCT_NVIDIA_NFORCE3_LAN2, as that PCI
ID also appears on the nForce2 Ultra 400Gb chipset's MCP.
Thomas E. Spanjaard [Wed, 13 Dec 2006 12:41:36 +0000 (12:41 +0000)]
Explicitly specify null_dtor as our objcache destructor. Fixes a panic when
we were out of empty magazines.
Matthew Dillon [Tue, 12 Dec 2006 19:01:31 +0000 (19:01 +0000)]
Add another ICH PCI ID.
Submitted-by: "Vlad Galu" <dudu@dudu.ro>
Peter Avalos [Tue, 12 Dec 2006 18:44:17 +0000 (18:44 +0000)]
Merge from vendor branch FILE:
Update to file-4.19.
Peter Avalos [Tue, 12 Dec 2006 18:44:17 +0000 (18:44 +0000)]
Update to file-4.19.
Peter Avalos [Tue, 12 Dec 2006 18:44:17 +0000 (18:44 +0000)]
Update to file-4.19.
Peter Avalos [Tue, 12 Dec 2006 18:27:25 +0000 (18:27 +0000)]
We don't use magic2mime, so remove it.
Sepherosa Ziehau [Tue, 12 Dec 2006 15:48:09 +0000 (15:48 +0000)]
- Correct some debug messages format.
- In ieee80211_init_neighbor(), print neighbors' rate set.
Sepherosa Ziehau [Tue, 12 Dec 2006 11:14:27 +0000 (11:14 +0000)]
Exploring low speed busses during cold boot, so USB keyboard will work even
if the kernel is configured with "device atkbd" and "device atkbdc"
Reported-by: Petr Janda <elekktretterr@exemail.com.au>
Tested-by: Petr Janda <elekktretterr@exemail.com.au>
Peter Avalos [Tue, 12 Dec 2006 06:56:25 +0000 (06:56 +0000)]
Update with the latest newsletters from the ISO3166 Maintenance Agency:
http://www.iso.ch/iso/en/prods-services/iso3166ma/03updates-on-iso-3166/index.html
This has the nice side-effect of fixing tzsetup.
Sascha Wildner [Tue, 12 Dec 2006 01:47:23 +0000 (01:47 +0000)]
Remove unnecessary escape character.
Sascha Wildner [Tue, 12 Dec 2006 01:27:10 +0000 (01:27 +0000)]
Convert to mdoc.
Sascha Wildner [Tue, 12 Dec 2006 00:49:22 +0000 (00:49 +0000)]
Convert to mdoc.
Sascha Wildner [Tue, 12 Dec 2006 00:26:38 +0000 (00:26 +0000)]
Add documentation for the mcontrol system call.
Sascha Wildner [Tue, 12 Dec 2006 00:08:17 +0000 (00:08 +0000)]
Add markup and bump date for rev. 1.5.
Sascha Wildner [Mon, 11 Dec 2006 23:59:49 +0000 (23:59 +0000)]
Fix typos: mininum/minimun -> minimum
Matthew Dillon [Mon, 11 Dec 2006 20:55:25 +0000 (20:55 +0000)]
Document MADV_SETMAP and MAP_VPAGETABLE. These functions support virtualized
page tables for memory mapped regions from userland.
Matthew Dillon [Mon, 11 Dec 2006 20:54:22 +0000 (20:54 +0000)]
Use ${.CURDIR} to get the correct path to the root skeleton directory.
Thomas E. Spanjaard [Sun, 10 Dec 2006 23:39:43 +0000 (23:39 +0000)]
This time *really* fix the .PATHs in the kmod Makefiles. I promise.