Matthew Dillon [Fri, 14 Sep 2012 17:13:39 +0000 (10:13 -0700)]
kernel - Use pool tokens to protect unix domain PCBs (2)
* Fix mismatched token unlock in last commit.
Matthew Dillon [Fri, 14 Sep 2012 16:10:06 +0000 (09:10 -0700)]
kernel - Use pool tokens to protect unix domain PCBs
* The read, status, and write paths now use per-pcb pool tokens
instead of the global unp_token. The global token is still used
for accept, connect, disconnect, etc.
* General semantics for making this SMP safe is to obtain a pointer
to the unp from so->so_pcb, then obtain the related pool token,
then re-check that so->so_pcb still equals unp.
* Pool token protects the peer pointer, unp->unp_conn. Any change
to unp->unp_conn requires both the pool token and the global token.
* This should improve concurrent reading and writing w/unix domain
sockets.
Matthew Dillon [Fri, 14 Sep 2012 08:47:19 +0000 (01:47 -0700)]
kernel - Fix unix domain socket portfn routing
* sonewconn_faddr() / sonewconn() was improperly overriding the sync_port
setting for unix domain sockets, causing unnecessary netmsg traffic to
the netisr threads.
* This should significantly improve unix domain socket performance.
With-help-from: sephe
Sepherosa Ziehau [Fri, 14 Sep 2012 01:48:28 +0000 (09:48 +0800)]
pci/mptable: Let parent route the interrupt before using the intline
Tested-by: swildner@
Matthew Dillon [Fri, 14 Sep 2012 00:51:13 +0000 (17:51 -0700)]
ls - Add -I to reverse -A
* ls implies -A when run as root. Add the -I option
which disables this behavior.
* Note that -A and -I will override each other on the
command line.
Matthew Dillon [Thu, 13 Sep 2012 20:47:03 +0000 (13:47 -0700)]
kernel - Implement segment pmap optimizations for x86-64 (5)
* Fix self-deadlock in pmap_remove_*() sequence. The sequence calls
pmap_remove_callback() -> pmap_release_pv(proc_pt_pv) but the caller
may already be holding the parent, proc_pd_pv, locked. If
pmap_release_pv() needs to get the parent it deadlocks.
Fixed by passing the parent into pmap_release_pv() for this case.
Matthew Dillon [Thu, 13 Sep 2012 18:39:11 +0000 (11:39 -0700)]
kernel - Implement segment pmap optimizations for x86-64 (4)
* Fix pmap_pte_quick() when it is called on a VM object's simple pmap.
Fixes a panic during postgres init w/ postgres/mmap. Simple pmaps
do not have PDP or PML4 pages or pv_entry's, only from PD on down.
* Do some minor API work on the pte-indexing functions.
Matthew Dillon [Thu, 13 Sep 2012 18:38:22 +0000 (11:38 -0700)]
Merge branch 'master' of ssh://crater.dragonflybsd.org/repository/git/dragonfly
Matthew Dillon [Thu, 13 Sep 2012 17:58:19 +0000 (10:58 -0700)]
kernel - Implement segment pmap optimizations for x86-64 (3)
* Fix pmap optimization bugs triggered by XORG (startx) and postgres/mmap
* The simple-mode pmaps embedded in VM objects do not have the PML4 or PDP
layer. This caused pmap_scan() to miss pages, resulting in an assertion
and panic during object frees if the objects were large enough.
* Improve postgres 9.2/mmap, still more work to go.
Sascha Wildner [Thu, 13 Sep 2012 17:06:15 +0000 (19:06 +0200)]
Sync zoneinfo database with tzdata2012f from ftp://ftp.iana.org/tz/releases
* australasia (Pacific/Fiji): Fiji DST is October 21 through January 20
this year. (Thanks to Steffen Thorsen.)
* Theory: Correct a typo.
Nuno Antunes [Thu, 13 Sep 2012 07:07:08 +0000 (08:07 +0100)]
Expand a comment in lwkt_switch().
Nuno Antunes [Wed, 12 Sep 2012 11:25:39 +0000 (12:25 +0100)]
kernel: remove useless for (;;).
Discussed-with: dillon
Sascha Wildner [Thu, 13 Sep 2012 09:57:19 +0000 (11:57 +0200)]
kernel: Use NULL instead of 0 for pointers, part 2/x.
Found-with: Coccinelle (http://coccinelle.lip6.fr/)
Matthew Dillon [Thu, 13 Sep 2012 09:38:36 +0000 (02:38 -0700)]
kernel - Implement segment pmap optimizations for x86-64 (2)
* Reorder code to fix an assertion when a non-optimized PT belonging
to the process pmap needs to be replaced by an optimized PT belonging
to a shared pmap.
Reported-by: ftigeot
Matthew Dillon [Thu, 13 Sep 2012 09:10:38 +0000 (02:10 -0700)]
kernel - Add sysctls and tunables for [ALT_]BREAK_TO_DEBUGGER, change
serial console
* Add kern.break_to_debugger and kern.alt_break_to_debugger sysctls and
/boot/loader.conf tunables.
* Allows enabling of these features without having to specify the
related options in the kernel config.
* Do not override current sio settings when checking, inputting, and
outputing characters via the console functions. The serial port
will be set up initially according to the console specs.
Matthew Dillon [Thu, 13 Sep 2012 07:23:00 +0000 (00:23 -0700)]
kernel - Implement segment pmap optimizations for x86-64 (1)
* Relax the mmap() size requirement when auto-aligning the address.
Also auto-align to a segment boundary if the size is > 16 * SEG_SIZE.
It previously only allowed size to be an exact multiple of SEG_SIZE.
* Some pages at the end won't be optimized, but the bulk of the mmap()
will be.
Matthew Dillon [Thu, 13 Sep 2012 01:25:19 +0000 (18:25 -0700)]
kernel - Implement segment pmap optimizations for x86-64
* Implement 2MB segment optimizations for x86-64. Any shared read-only
or read-write VM object mapped into memory, including physical objects
(so both sysv_shm and mmap), which is a multiple of the segment size
and segment-aligned can be optimized.
* Enable with sysctl machdep.pmap_mmu_optimize=1
Default is off for now. This is an experimental feature.
* It works as follows: A VM object which is large enough will, when VM
faults are generated, store a truncated pmap (PD, PT, and PTEs) in the
VM object itself.
VM faults whos vm_map_entry's can be optimized will cause the PTE, PT,
and also the PD (for now) to be stored in a pmap embedded in the VM_OBJECT,
instead of in the process pmap.
The process pmap then creates PT entry in the PD page table that points
to the PT page table page stored in the VM_OBJECT's pmap.
* This removes nearly all page table overhead from fork()'d processes or
even unrelated process which massively share data via mmap() or sysv_shm.
We still recommend using sysctl kern.ipc.shm_use_phys=1 (which is now
the default), which also removes the PV entries associated with the
shared pmap. However, with this optimization PV entries are no longer
a big issue since they will not be replicated in each process, only in
the common pmap stored in the VM_OBJECT.
* Features of this optimization:
* Number of PV entries is reduced to approximately the number of live
pages and no longer multiplied by the number of processes separately
mapping the shared memory.
* One process faulting in a page naturally makes the PTE available to
all other processes mapping the same shared memory. The other processes
do not have to fault that same page in.
* Page tables survive process exit and restart.
* Once page tables are populated and cached, any new process that maps
the shared memory will take far fewer faults because each fault will
bring in an ENTIRE page table. Postgres w/ 64-clients, VM fault rate
was observed to drop from 1M faults/sec to less than 500 at startup,
and during the run the fault rates dropped from a steady decline into
the hundreds of thousands into an instant decline to virtually zero
VM faults.
* We no longer have to depend on sysv_shm to optimize the MMU.
* CPU caches will do a better job caching page tables since most of
them are now themselves shared. Even when we invltlb, more of the
page tables will be in the L1, L2, and L3 caches.
* EXPERIMENTAL!!!!!
Matthew Dillon [Thu, 13 Sep 2012 01:20:51 +0000 (18:20 -0700)]
kernel - Segment-align mmap and sysv_shm when possible
* Segment align mmap and sysv_shm mappings which are large enough
and whos size is a multiple of the segment-size.
NOTE: MAP_FIXED mappings will not be segment-aligned, but the
optimization will sitll work if the passed address is already
segment-aligned.
* This will allow them to be optimized automatically by
machdep.pmap_mmu_optimize.
Sascha Wildner [Wed, 12 Sep 2012 21:42:18 +0000 (23:42 +0200)]
kernel: Remove unused headers.
Sascha Wildner [Wed, 12 Sep 2012 17:58:43 +0000 (19:58 +0200)]
kernel: Remove some unused variables.
Chris Turner [Wed, 12 Sep 2012 13:11:31 +0000 (13:11 +0000)]
hammer(8): add HAMMER_RSH environment variable support.
Add support for a HAMMER_RSH environment variable which can be used
to select an alternate remote shell to be used for hammer remote operations,
change remote shell invocation to rsh(1) style '-l user host' instead of
ssh-style user@host to permit usage of rsh(1) as an alternate HAMMER_RSH
without the need for a wrapper script. Also change exec call of subshell
to use execvp instead of a hardcoded path to facillitate this change.
Update hammer.8 docs, along with minor formatting fix to environment
variable summary header sentence.
Matthew Dillon [Tue, 11 Sep 2012 21:39:17 +0000 (14:39 -0700)]
hammer - Add ssh-remote directive
* Adds a feature that allows you to set up a command="..." prefix for a
ssh key in your ~/.ssh/authorized_keys file that only runs the hammer
utility and only with specific commands and filesystem paths.
For example:
command="/sbin/hammer ssh-remote mirror-read,mirror-write /path/" ssh-rsa...
Currently requires a trailing '/' if you want to restrict the path to
a subdirectory. Multiple commands can be listed but the filesystem path
restriction is only currently tested for mirror-read and mirror-write.
* This allows ssh to be used for mirroring without having to give shell
access to the remote.
Matthew Dillon [Tue, 11 Sep 2012 16:54:02 +0000 (09:54 -0700)]
hammer - Add scoreboard file option
* Add -e <scoreboardfile> option for mirror-stream, so one can see the
progress of mirror-streams running in the background.
Nuno Antunes [Tue, 11 Sep 2012 10:49:51 +0000 (11:49 +0100)]
netisr: rename cpu_portfn() to netisr_portfn().
No functional change.
Searched and replaced with:
find sys/ -type f -exec sed -i "" 's/cpu_portfn/netisr_portfn/g' '{}' \;
Sascha Wildner [Tue, 11 Sep 2012 12:52:03 +0000 (14:52 +0200)]
hier.7: Oops, use Xr
Sascha Wildner [Tue, 11 Sep 2012 12:43:43 +0000 (14:43 +0200)]
hier.7: Add some words about /usr/share/terminfo.
Sascha Wildner [Tue, 11 Sep 2012 11:25:50 +0000 (13:25 +0200)]
Fix buildworld.
François Tigeot [Tue, 11 Sep 2012 09:30:37 +0000 (11:30 +0200)]
ixgbe: Document a performance tuning sysctl
* It is needed to consistently increase single stream TCP send
performance
* Without it, single tcp connections rarely reach the maximum
recorded speed of 9.4Gb/s
Sascha Wildner [Tue, 11 Sep 2012 08:39:21 +0000 (10:39 +0200)]
kernel/inet: Remove some unused variables.
Sascha Wildner [Tue, 11 Sep 2012 08:06:14 +0000 (10:06 +0200)]
mfi(4): Break some overly long lines.
Sepherosa Ziehau [Tue, 11 Sep 2012 01:40:48 +0000 (09:40 +0800)]
acpi/resource: We still need to make sure that IRQ is valid at least
Sascha Wildner [Mon, 10 Sep 2012 21:37:54 +0000 (23:37 +0200)]
kernel: Use NULL instead of 0 for pointers, part 1/x.
Found-with: Coccinelle (http://coccinelle.lip6.fr/)
Matthew Dillon [Mon, 10 Sep 2012 21:03:30 +0000 (14:03 -0700)]
hammer - Fix core dump during remote termination of mirror-stream
* Fix issue where remote-end hammer can core trying to fprintf() an error
message if a mirror-stream connection is lost unexpectedly.
Sascha Wildner [Mon, 10 Sep 2012 17:00:54 +0000 (19:00 +0200)]
kernel/acpi: Add missing include (for acpi_sci_irqno()).
François Tigeot [Sun, 9 Sep 2012 08:37:34 +0000 (10:37 +0200)]
ixgbe: Replace the TX lockmgr lock by a serializer
François Tigeot [Mon, 10 Sep 2012 12:11:41 +0000 (14:11 +0200)]
ixgbe: Do all RX/TX processing in ithreads
* There is no need to launch taskqueues if there is more data to
process, the next interrupt thread will handle it.
* This will be no later than 125µs in the general case anyway.
* This change can even increase performance by removing lock contention
between ithreads and taskqueues trying to run at the same time.
Sepherosa Ziehau [Mon, 10 Sep 2012 09:45:15 +0000 (17:45 +0800)]
ifpoll: Dispatch netmsgs to netisr, which is MPSAFE now
Sepherosa Ziehau [Mon, 10 Sep 2012 09:03:41 +0000 (17:03 +0800)]
acpi/resource: Only skip SCI trigger/polarity configuration
The code before this commit could cause interrupt storm on certain
systems, on which certain IRQs are configured into different mode
but the configured IRQs are actually never used.
Reported-by: swildner@
Chris Turner [Mon, 10 Sep 2012 04:30:21 +0000 (04:30 +0000)]
periodic.conf(5): document new 'daily_clean_hammer_pfslist' variable.
On further reflection - as hammer cleanup is not limited to pfs's -
should this this variable be called 'fslist'? but then - does that
make the usage for pfs's less obvious. Hmm. A philosophical question.
Leave the name for now, and take a sip from a glass 100% full of
some percentage of air and liquid.
suggested-by: swildner@
Chris Turner [Mon, 10 Sep 2012 00:55:21 +0000 (00:55 +0000)]
periodic/daily: add option to specify list of pfs's to daily/160.clean-hammer
Add a new variable, daily_clean_hammer_pfslist, which can be used to
specify a list of pfs's to cleanup. This is useful e.g. on systems
with offline hammer slave pfs's which should be cleaned but would
not be done so with the default 'hammer cleanup' command.
Defaults to previous online-only cleanup behavior if this variable is
not set.
Sascha Wildner [Sun, 9 Sep 2012 21:16:28 +0000 (23:16 +0200)]
iscontrol(8): Remove unused header file.
François Tigeot [Sun, 9 Sep 2012 12:30:05 +0000 (14:30 +0200)]
ixgbe: Remove the Adaptative Interrupt Moderation code
* It didn't work correctly, the number of ixgbe interrupts per second
could become excessive
* Use a fixed rate for all interrupts, be they legacy, MSI or
MSI-X vectors. 8000 intr/s is a good default value.
* This change increases single stream tcp performance up to almost 50%
in the sending direction
François Tigeot [Thu, 6 Sep 2012 11:58:55 +0000 (13:58 +0200)]
ixgbe: Move sysctl creation to a separate function
Sascha Wildner [Sun, 9 Sep 2012 12:54:20 +0000 (14:54 +0200)]
kernel/bce: Fix an impossible && that should really be a ||.
Reviewed-by: sephe
Sascha Wildner [Sun, 9 Sep 2012 13:00:26 +0000 (15:00 +0200)]
Install apm(4)'s manual page on x86_64, too.
acpi(4) emulates apm(4)'s ioctls so it is relevant on x86_64 too.
Also, mention these things.
François Tigeot [Thu, 6 Sep 2012 12:43:17 +0000 (14:43 +0200)]
ixgbe: Enable existing MSI-X code
Sascha Wildner [Fri, 7 Sep 2012 21:24:45 +0000 (23:24 +0200)]
kernel: Remove two bogus break statements.
Sascha Wildner [Fri, 7 Sep 2012 20:18:45 +0000 (22:18 +0200)]
Remove pcidevs_data.h via 'make upgrade'.
Sascha Wildner [Fri, 7 Sep 2012 20:02:08 +0000 (22:02 +0200)]
BUS_SETUP_INTR.9: Add missing comma and bump .Dd
Sascha Wildner [Fri, 7 Sep 2012 19:51:17 +0000 (21:51 +0200)]
kernel/hptmv: Fix the completion of a write.
What is intended here is to perform BUS_DMASYNC_POSTWRITE when a write
is completed, but the 'else if' had the wrong check.
François Tigeot [Fri, 7 Sep 2012 19:18:12 +0000 (21:18 +0200)]
Rename notes/ directory to doc/
Antonio Huete Jimenez [Fri, 3 Sep 2010 08:39:27 +0000 (10:39 +0200)]
doc - Fix previous commit.
Antonio Huete Jimenez [Fri, 3 Sep 2010 08:32:38 +0000 (10:32 +0200)]
doc - Add some more porting notes regarding CVS ids.
Sascha Wildner [Thu, 25 Dec 2008 21:57:13 +0000 (22:57 +0100)]
Add some notes I had lying in my tree.
Peter Avalos [Sun, 6 Apr 2008 19:08:30 +0000 (19:08 +0000)]
Lose LK_EXCLUSIVE in the lockinit example and a typo fix.
Sascha Wildner [Sat, 29 Dec 2007 18:35:59 +0000 (18:35 +0000)]
Add some documentation on converting sleep mutexes and fix a couple of typos.
Submitted-by: Aggelos Economopoulos <aoiko@cc.ece.ntua.gr>
Sascha Wildner [Wed, 31 Oct 2007 04:52:52 +0000 (04:52 +0000)]
Add a section about renamed kernel functions and clean up a bit.
Matthew Dillon [Sun, 3 Dec 2006 20:49:59 +0000 (20:49 +0000)]
Add an internal document describing (in a very incomplete way at the moment) how to port a driver from FreeBSD.
François Tigeot [Fri, 7 Sep 2012 09:43:17 +0000 (11:43 +0200)]
Document bus_setup_intr_descr(9)
Sascha Wildner [Fri, 7 Sep 2012 15:57:04 +0000 (17:57 +0200)]
VFS.9: Add a reference to VFS_SET(9).
Reported-by: Raimundo Santos <raitech@gmail.com>
Sascha Wildner [Fri, 7 Sep 2012 12:57:48 +0000 (14:57 +0200)]
kernel/ipx: Add a missing 'goto set_head;'.
François Tigeot [Sat, 1 Sep 2012 17:25:04 +0000 (19:25 +0200)]
ixgbe: Explicitely enable PCIe bus mastering
Sascha Wildner [Thu, 6 Sep 2012 11:11:03 +0000 (13:11 +0200)]
kernel: Use NULL for pointers in some places.
Sascha Wildner [Wed, 5 Sep 2012 21:32:42 +0000 (23:32 +0200)]
kernel: Remove pcidevs_data.h. It serves no purpose.
Sascha Wildner [Tue, 4 Sep 2012 17:21:16 +0000 (19:21 +0200)]
kernel/ixgbe: Add missing braces.
Sepherosa Ziehau [Mon, 3 Sep 2012 09:46:58 +0000 (17:46 +0800)]
tcp: Implement asynchronized pru_rcvd
This mainly avoids extra scheduling cost on the reception path due to
lwkt_domsg(). lwkt_sendmsg() is now used to carry out TCP pru_rcvd.
Since TCP's pru_rcvd could be batched, one pru_rcvd netmsg is embedded
into struct socket to avoid pru_rcvd netmsg allocation for each pru_rcvd,
and this netmsg will be used by lwkt_sendmsg(). Whether this embedded
pcu_rcvd netmsg should be sent or not is determined by its MSG_DONE bit.
Since user thread and netisr thread could be on different CPUs, the
embedded pru_rcvd netmsg's MSG_DONE bit is protected by a spinlock.
To cope with the following race that could drop window updates,
tcp_usr_rcvd() replies asynchronized rcvd netmsg before tcp_output():
netisr thread user thread
tcp_usr_rcvd() sorcvtcp()
{ {
tcp_output() :
: :
: sbunlinkmbuf()
: if (rcvd & MSG_DONE) (2)
: lwkt_sendmsg(rvcd)
: :
lwkt_replymsg(rcvd) (1)
}
At (2) window update is dropped, since rcvd netmsg is not replied yet at (1)
The result:
On i7-2600 (4C/8T, 3.4GHz):
32 parallel netperf -H 127.0.0.1 -t TCP_STREAM -P0 -l 30 (4 runs, unit: Mbps)
old 30253.88 30242.58 30162.55 30101.51
new 33962.74 33798.70 33499.92 33482.35
This gives ~12% performance improvement.
Nuno Antunes [Mon, 3 Sep 2012 04:30:05 +0000 (05:30 +0100)]
msgport.9: Fix a path.
* sys/kern/netisr.c -> sys/net/netisr.c
Pointed-out-by: Romick <yellowrabbit2010@gmail.com>
Sascha Wildner [Mon, 3 Sep 2012 04:04:38 +0000 (06:04 +0200)]
acpi: Remove some unused files.
Sascha Wildner [Mon, 3 Sep 2012 03:04:55 +0000 (05:04 +0200)]
Remove another unused header (<machine/ultrasound.h>).
Sascha Wildner [Mon, 3 Sep 2012 02:28:19 +0000 (04:28 +0200)]
Remove an unused old ral(4) firmware header.
Sascha Wildner [Mon, 3 Sep 2012 02:18:05 +0000 (04:18 +0200)]
Remove an unused and empty header (<machine/mtpr.h>).
Sascha Wildner [Sun, 2 Sep 2012 16:08:50 +0000 (18:08 +0200)]
libprop: Add two missing MLINKS.
Sascha Wildner [Sun, 2 Sep 2012 15:55:30 +0000 (17:55 +0200)]
tbridge: Sync NAME, SYNOPSIS and MLINKS.
Sascha Wildner [Sun, 2 Sep 2012 15:47:26 +0000 (17:47 +0200)]
libm: Add missing MLINK.
Sascha Wildner [Sun, 2 Sep 2012 11:31:33 +0000 (13:31 +0200)]
Bring in a VFS_SET(9) manual page (from FreeBSD).
Sascha Wildner [Sat, 1 Sep 2012 22:26:04 +0000 (00:26 +0200)]
link.2: Use .Fn and add .Nm linkat
Sascha Wildner [Fri, 31 Aug 2012 22:06:05 +0000 (00:06 +0200)]
amr(4): Remove some unused code (amr_timeout()).
Taken-from: FreeBSD
Sascha Wildner [Fri, 31 Aug 2012 21:00:35 +0000 (23:00 +0200)]
Add CARP support to the GENERIC kernels.
http://leaf.dragonflybsd.org/mailarchive/users/2012-08/msg00086.html
Suggested-by: Charles Rapenne <charles.rapenne@gmail.com>
Approved-by: sephe
Alex Hornung [Thu, 30 Aug 2012 08:17:12 +0000 (08:17 +0000)]
usched_bsd4 - topology sched: go for safe defaults
* When we don't know how to handle the level of the current CPU, go for
safe defaults disabling both cache-coherent and SMT scheduling.
* This seems to be the case on single-core machines where the level is
the PACKAGE_LEVEL.
Reported-by: Max Herrgard, Ferruccio Zamuner, David Shao
Dragonfly-bug: http://bugs.dragonflybsd.org/issue2408
Dragonfly-bug: http://bugs.dragonflybsd.org/issue2413
Sepherosa Ziehau [Thu, 30 Aug 2012 04:13:08 +0000 (12:13 +0800)]
sorecvtcp: Remove unapplied code
Sepherosa Ziehau [Thu, 30 Aug 2012 03:26:13 +0000 (11:26 +0800)]
socket: Replicate soreceive() to sorecvtcp() for cleanup and optimization
Sepherosa Ziehau [Wed, 29 Aug 2012 09:51:35 +0000 (17:51 +0800)]
jme: RX interrupt to ~6000Hz, TX interrupt to ~4000Hz
Sepherosa Ziehau [Wed, 29 Aug 2012 09:35:08 +0000 (17:35 +0800)]
jme: Record number of times that RX ring becomes empty
Sepherosa Ziehau [Wed, 29 Aug 2012 09:10:43 +0000 (17:10 +0800)]
jme: Allow MSI-X be evenly spreaded across CPUs
Sepherosa Ziehau [Wed, 29 Aug 2012 08:40:29 +0000 (16:40 +0800)]
igb: Set default RX descriptor count to 512
Sepherosa Ziehau [Wed, 29 Aug 2012 02:25:47 +0000 (10:25 +0800)]
acpi/sci: Test ACPI MADT interrupt override entry's preferred mode first
Sascha Wildner [Tue, 28 Aug 2012 22:16:01 +0000 (00:16 +0200)]
wpa_supplicant(8): Use libpcap functions.
Sascha Wildner [Tue, 28 Aug 2012 22:08:24 +0000 (00:08 +0200)]
kernel/acpi: Add smart battery support.
I don't know which laptops have them, as far as I can tell, none of mine
do. But as some seem to have it, it's worth supporting.
https://en.wikipedia.org/wiki/Smart_Battery_System
This is the patch from the tracker with some later updates FreeBSD did.
Taken-from: FreeBSD
Dragonfly-bug: <https://bugs.dragonflybsd.org/issues/1229>
Submitted-by: Dmitry Komissaroff <aunoor@gmail.com>
Sascha Wildner [Tue, 28 Aug 2012 16:32:09 +0000 (18:32 +0200)]
mpt(4): We don't have MOD_QUIESCE.
Sepherosa Ziehau [Tue, 28 Aug 2012 07:10:58 +0000 (15:10 +0800)]
tcp/ncr: Avoid using magic number
Sepherosa Ziehau [Tue, 28 Aug 2012 07:00:28 +0000 (15:00 +0800)]
tcp: RFC3517bis is now officially RFC6675
Sepherosa Ziehau [Tue, 28 Aug 2012 06:30:47 +0000 (14:30 +0800)]
acpi/pcib: Guard against invalid GSI provided by PRT
Sepherosa Ziehau [Tue, 28 Aug 2012 06:12:10 +0000 (14:12 +0800)]
acpi/resource: Use legacy_intr_find to detect invalid IRQ configure
Sepherosa Ziehau [Tue, 28 Aug 2012 06:02:10 +0000 (14:02 +0800)]
pci: Guard against wrong user supplied IRQ assignment
Sepherosa Ziehau [Tue, 28 Aug 2012 05:43:35 +0000 (13:43 +0800)]
acpi/fadt: Make sure that SCI IRQ is valid
Sepherosa Ziehau [Tue, 28 Aug 2012 04:46:20 +0000 (12:46 +0800)]
pci/pir: Make sure that the IRQ is allowed to be configured
If the IRQ is already configured into non-level/low mode, we should not
change the trigger and polarity
Sepherosa Ziehau [Tue, 28 Aug 2012 04:23:26 +0000 (12:23 +0800)]
MachIntr: Add two methods to find IRQ
- Find IRQ conforming to the specified trigger and polarity, if it was
configured.
- Find IRQ by GSI, the located IRQ must conform to the specified trigger
and polarity if it was configured.
Sepherosa Ziehau [Mon, 27 Aug 2012 02:43:48 +0000 (10:43 +0800)]
acpi/intr: Fix comment, source index is GSI _not_ IRQ
Sascha Wildner [Mon, 27 Aug 2012 18:00:46 +0000 (20:00 +0200)]
kernel: Turn the delay before mounting root into a tunable.
Submitted-by: Francis Gudin <fgudin@nerim.net>
Dragonfly-bug: <http://bugs.dragonflybsd.org/issues/2373>
Sascha Wildner [Mon, 27 Aug 2012 17:57:49 +0000 (19:57 +0200)]
/boot/defaults/loader.conf: Adjust a comment.