mneumann's projects / dragonfly.git / blame
| Commit | Line | Data |
|---|---|---|
| 984263bc MD |
1 | # |
| 2 | # $FreeBSD: src/etc/modems,v 1.4 1999/08/27 23:23:42 peter Exp $ | |
| 1de703da | 3 | # $DragonFly: src/etc/modems,v 1.2 2003/06/17 04:24:45 dillon Exp $ |
| 984263bc MD |
4 | # @(#)modems 3/24/95 |
| 5 | # | |
| 6 | # modems -- modem configuration data base file | |
| 7 | # see tip(1), modems(5) | |
| 8 | # | |
| 9 | # dial_command AT command to dial up remote | |
| 10 | # echo_off_command AT command to turn off command echo | |
| 11 | # escape_guard_time Shroud escape sequence with specified delay (ms) | |
| 12 | # escape_sequence Return to command escape sequence | |
| 13 | # hangup_command AT command to hangup modem | |
| 14 | # hw_flow_control Enable RTS/CTS flow control between DTE/DCE | |
| 15 | # intercharacter_delay Delay between characters sent to modem when issuing | |
| 16 | # commands | |
| 17 | # intercommand_delay Minimum delay between commands to modem | |
| 18 | # init_string AT command to initialize modem before dialing out | |
| 19 | # lock_baud Use fixed DTE / DCE bit rate | |
| 20 | # reset_delay Delay required by modem for reset | |
| 21 | # | |
| 22 | ||
| 23 | sportster|st|US Robotics Sportster 14.4K:dial_command=ATDT%s\r:hangup_command=ATH\r:\ | |
| 24 | :echo_off_command=ATE0\r:reset_command=AT&F1\r:\ | |
| 25 | :init_string=AT&B1&H1&R2&C1&D2\r:\ | |
| 26 | :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ | |
| 27 | :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: | |
| 28 | ||
| 29 | mt932|multitech|mt|Multitech 932:dial_command=ATDT%s\r:hangup_command=ATH\r:\ | |
| 30 | :echo_off_command=ATE0\r:reset_command=ATZ\r:\ | |
| 31 | :init_string=AT$BA0$SB38400&E1&E4&E13&E15Q0V1X4E0S0=0\r:\ | |
| 32 | :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ | |
| 33 | :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: | |
| 34 | ||
| 35 | generic|Generic AT command modem (use defaults): |