1 .\" Copyright (c) 2006 Scott Long
2 .\" All rights reserved.
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\" notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\" notice, this list of conditions and the following disclaimer in the
11 .\" documentation and/or other materials provided with the distribution.
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
14 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
17 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 .\" $FreeBSD: src/share/man/man4/mfi.4,v 1.13 2010/05/12 17:12:38 brueffer Exp $
32 .Nd "LSI MegaRAID SAS driver"
34 To compile this driver into the kernel,
35 place the following lines in your
36 kernel configuration file:
37 .Bd -ragged -offset indent
42 Alternatively, to load the driver as a
43 module at boot time, place the following line in
45 .Bd -literal -offset indent
49 This driver is for LSI's next generation PCI Express SAS RAID controllers.
50 Access to RAID arrays (logical disks) from this driver is provided via
52 and access to JBOD disks is provided via
55 A simple management interface is also provided on a per-controller basis via
62 name is derived from the phrase "MegaRAID Firmware Interface", which is
63 substantially different than the old "MegaRAID" interface and thus requires
65 Older SCSI and SATA MegaRAID cards are supported by
67 and will not work with this driver.
69 3 Gb/s and 6 Gb/s support both initiator target (IT) and integrated RAID (IR)
71 .Pa http://kb.lsi.com/KnowledgebaseArticle16266.aspx ) .
74 driver supports controllers with an IR image.
75 At least some cards (such as the
76 .Tn IBM ServeRAID M1015 )
79 driver when IT firmware is used.
81 Two sysctls are provided to tune the
83 driver's behavior when a request is made to remove a mounted volume.
84 By default the driver will disallow any requests to remove a mounted volume.
86 .Va dev.mfi.%d.delete_busy_volumes
88 then the driver will allow mounted volumes to be removed.
92 driver supports the following hardware:
98 LSI MegaRAID SAS 8408E
100 LSI MegaRAID SAS 8480E
102 LSI MegaRAID SAS 9240-4i
104 LSI MegaRAID SAS 9240-8i
106 LSI MegaRAID SAS 9260-4i
108 LSI MegaRAID SAS 9260-8i
110 LSI MegaRAID SAS 9260DE-8i
112 LSI MegaRAID SAS 9260-16i
114 LSI MegaRAID SAS 9261-8i
116 LSI MegaRAID SAS 9280-4i4e
118 LSI MegaRAID SAS 9280-8e
120 LSI MegaRAID SAS 9280DE-8e
122 LSI MegaRAID SAS 9280-16i4e
124 LSI MegaRAID SAS 9280-24i4e
130 IBM ServeRAID M1015 SAS/SATA
132 IBM ServeRAID M5015 SAS/SATA
136 Intel RAID Controller SROMBSAS18E
139 .Bl -tag -width ".Pa /dev/mfisyspd?" -compact
141 array/logical disk interface
142 .It Pa /dev/mfisyspd?
149 .It "mfid%d: Unable to delete busy device"
150 An attempt was made to remove a mounted volume.
151 .It "mfisyspd%d: Unable to delete busy device"
162 driver first appeared in
167 driver and this manual page were written by
168 .An Scott Long Aq scottl@FreeBSD.org .
170 .\"The driver does not support big-endian architectures at this time.