Continue fleshing out the VKERNEL.
[dragonfly.git] / sys / platform / vkernel / i386 / cpu_regs.c
1 /*-
2  * Copyright (c) 1992 Terrence R. Lambert.
3  * Copyright (C) 1994, David Greenman
4  * Copyright (c) 1982, 1987, 1990, 1993
5  *      The Regents of the University of California.  All rights reserved.
6  *
7  * This code is derived from software contributed to Berkeley by
8  * William Jolitz.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *      This product includes software developed by the University of
21  *      California, Berkeley and its contributors.
22  * 4. Neither the name of the University nor the names of its contributors
23  *    may be used to endorse or promote products derived from this software
24  *    without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36  * SUCH DAMAGE.
37  *
38  *      from: @(#)machdep.c     7.4 (Berkeley) 6/3/91
39  * $FreeBSD: src/sys/i386/i386/machdep.c,v 1.385.2.30 2003/05/31 08:48:05 alc Exp $
40  * $DragonFly: src/sys/platform/vkernel/i386/cpu_regs.c,v 1.1 2007/01/05 22:18:18 dillon Exp $
41  */
42
43 #include "use_ether.h"
44 #include "use_npx.h"
45 #include "use_isa.h"
46 #include "opt_atalk.h"
47 #include "opt_compat.h"
48 #include "opt_ddb.h"
49 #include "opt_directio.h"
50 #include "opt_inet.h"
51 #include "opt_ipx.h"
52 #include "opt_msgbuf.h"
53 #include "opt_swap.h"
54
55 #include <sys/param.h>
56 #include <sys/systm.h>
57 #include <sys/sysproto.h>
58 #include <sys/signalvar.h>
59 #include <sys/kernel.h>
60 #include <sys/linker.h>
61 #include <sys/malloc.h>
62 #include <sys/proc.h>
63 #include <sys/buf.h>
64 #include <sys/reboot.h>
65 #include <sys/mbuf.h>
66 #include <sys/msgbuf.h>
67 #include <sys/sysent.h>
68 #include <sys/sysctl.h>
69 #include <sys/vmmeter.h>
70 #include <sys/bus.h>
71 #include <sys/upcall.h>
72 #include <sys/usched.h>
73 #include <sys/reg.h>
74
75 #include <vm/vm.h>
76 #include <vm/vm_param.h>
77 #include <sys/lock.h>
78 #include <vm/vm_kern.h>
79 #include <vm/vm_object.h>
80 #include <vm/vm_page.h>
81 #include <vm/vm_map.h>
82 #include <vm/vm_pager.h>
83 #include <vm/vm_extern.h>
84
85 #include <sys/thread2.h>
86
87 #include <sys/user.h>
88 #include <sys/exec.h>
89 #include <sys/cons.h>
90
91 #include <ddb/ddb.h>
92
93 #include <machine/cpu.h>
94 #include <machine/clock.h>
95 #include <machine/specialreg.h>
96 #include <machine/md_var.h>
97 #include <machine/pcb_ext.h>            /* pcb.h included via sys/user.h */
98 #include <machine/globaldata.h>         /* CPU_prvspace */
99 #include <machine/smp.h>
100 #ifdef PERFMON
101 #include <machine/perfmon.h>
102 #endif
103 #include <machine/cputypes.h>
104
105 #include <bus/isa/rtc.h>
106 #include <machine/vm86.h>
107 #include <sys/random.h>
108 #include <sys/ptrace.h>
109 #include <machine/sigframe.h>
110
111 extern void dblfault_handler (void);
112
113 #ifndef CPU_DISABLE_SSE
114 static void set_fpregs_xmm (struct save87 *, struct savexmm *);
115 static void fill_fpregs_xmm (struct savexmm *, struct save87 *);
116 #endif /* CPU_DISABLE_SSE */
117 #ifdef DIRECTIO
118 extern void ffs_rawread_setup(void);
119 #endif /* DIRECTIO */
120
121 #ifdef SMP
122 int64_t tsc_offsets[MAXCPU];
123 #else
124 int64_t tsc_offsets[1];
125 #endif
126
127 #if defined(SWTCH_OPTIM_STATS)
128 extern int swtch_optim_stats;
129 SYSCTL_INT(_debug, OID_AUTO, swtch_optim_stats,
130         CTLFLAG_RD, &swtch_optim_stats, 0, "");
131 SYSCTL_INT(_debug, OID_AUTO, tlb_flush_count,
132         CTLFLAG_RD, &tlb_flush_count, 0, "");
133 #endif
134
135 int physmem = 0;
136
137 static int
138 sysctl_hw_physmem(SYSCTL_HANDLER_ARGS)
139 {
140         int error = sysctl_handle_int(oidp, 0, ctob(physmem), req);
141         return (error);
142 }
143
144 SYSCTL_PROC(_hw, HW_PHYSMEM, physmem, CTLTYPE_INT|CTLFLAG_RD,
145         0, 0, sysctl_hw_physmem, "IU", "");
146
147 static int
148 sysctl_hw_usermem(SYSCTL_HANDLER_ARGS)
149 {
150         int error = sysctl_handle_int(oidp, 0,
151                 ctob(physmem - vmstats.v_wire_count), req);
152         return (error);
153 }
154
155 SYSCTL_PROC(_hw, HW_USERMEM, usermem, CTLTYPE_INT|CTLFLAG_RD,
156         0, 0, sysctl_hw_usermem, "IU", "");
157
158 #if 0
159
160 static int
161 sysctl_machdep_msgbuf(SYSCTL_HANDLER_ARGS)
162 {
163         int error;
164
165         /* Unwind the buffer, so that it's linear (possibly starting with
166          * some initial nulls).
167          */
168         error=sysctl_handle_opaque(oidp,msgbufp->msg_ptr+msgbufp->msg_bufr,
169                 msgbufp->msg_size-msgbufp->msg_bufr,req);
170         if(error) return(error);
171         if(msgbufp->msg_bufr>0) {
172                 error=sysctl_handle_opaque(oidp,msgbufp->msg_ptr,
173                         msgbufp->msg_bufr,req);
174         }
175         return(error);
176 }
177
178 SYSCTL_PROC(_machdep, OID_AUTO, msgbuf, CTLTYPE_STRING|CTLFLAG_RD,
179         0, 0, sysctl_machdep_msgbuf, "A","Contents of kernel message buffer");
180
181 static int msgbuf_clear;
182
183 static int
184 sysctl_machdep_msgbuf_clear(SYSCTL_HANDLER_ARGS)
185 {
186         int error;
187         error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2,
188                 req);
189         if (!error && req->newptr) {
190                 /* Clear the buffer and reset write pointer */
191                 bzero(msgbufp->msg_ptr,msgbufp->msg_size);
192                 msgbufp->msg_bufr=msgbufp->msg_bufx=0;
193                 msgbuf_clear=0;
194         }
195         return (error);
196 }
197
198 SYSCTL_PROC(_machdep, OID_AUTO, msgbuf_clear, CTLTYPE_INT|CTLFLAG_RW,
199         &msgbuf_clear, 0, sysctl_machdep_msgbuf_clear, "I",
200         "Clear kernel message buffer");
201
202 #endif
203
204 /*
205  * Send an interrupt to process.
206  *
207  * Stack is set up to allow sigcode stored
208  * at top to call routine, followed by kcall
209  * to sigreturn routine below.  After sigreturn
210  * resets the signal mask, the stack, and the
211  * frame pointer, it returns to the user
212  * specified pc, psl.
213  */
214 void
215 sendsig(sig_t catcher, int sig, sigset_t *mask, u_long code)
216 {
217         struct lwp *lp = curthread->td_lwp;
218         struct proc *p = lp->lwp_proc;
219         struct trapframe *regs;
220         struct sigacts *psp = p->p_sigacts;
221         struct sigframe sf, *sfp;
222         int oonstack;
223
224         regs = lp->lwp_md.md_regs;
225         oonstack = (lp->lwp_sigstk.ss_flags & SS_ONSTACK) ? 1 : 0;
226
227         /* save user context */
228         bzero(&sf, sizeof(struct sigframe));
229         sf.sf_uc.uc_sigmask = *mask;
230         sf.sf_uc.uc_stack = lp->lwp_sigstk;
231         sf.sf_uc.uc_mcontext.mc_onstack = oonstack;
232         sf.sf_uc.uc_mcontext.mc_gs = rgs();
233         bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(struct trapframe));
234
235         /* Allocate and validate space for the signal handler context. */
236         /* XXX lwp flags */
237         if ((p->p_flag & P_ALTSTACK) != 0 && !oonstack &&
238             SIGISMEMBER(psp->ps_sigonstack, sig)) {
239                 sfp = (struct sigframe *)(lp->lwp_sigstk.ss_sp +
240                     lp->lwp_sigstk.ss_size - sizeof(struct sigframe));
241                 lp->lwp_sigstk.ss_flags |= SS_ONSTACK;
242         }
243         else
244                 sfp = (struct sigframe *)regs->tf_esp - 1;
245
246         /* Translate the signal is appropriate */
247         if (p->p_sysent->sv_sigtbl) {
248                 if (sig <= p->p_sysent->sv_sigsize)
249                         sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)];
250         }
251
252         /* Build the argument list for the signal handler. */
253         sf.sf_signum = sig;
254         sf.sf_ucontext = (register_t)&sfp->sf_uc;
255         if (SIGISMEMBER(psp->ps_siginfo, sig)) {
256                 /* Signal handler installed with SA_SIGINFO. */
257                 sf.sf_siginfo = (register_t)&sfp->sf_si;
258                 sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher;
259
260                 /* fill siginfo structure */
261                 sf.sf_si.si_signo = sig;
262                 sf.sf_si.si_code = code;
263                 sf.sf_si.si_addr = (void*)regs->tf_err;
264         }
265         else {
266                 /* Old FreeBSD-style arguments. */
267                 sf.sf_siginfo = code;
268                 sf.sf_addr = regs->tf_err;
269                 sf.sf_ahu.sf_handler = catcher;
270         }
271
272 #if 0
273         /*
274          * If we're a vm86 process, we want to save the segment registers.
275          * We also change eflags to be our emulated eflags, not the actual
276          * eflags.
277          */
278         if (regs->tf_eflags & PSL_VM) {
279                 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
280                 struct vm86_kernel *vm86 = &lp->lwp_thread->td_pcb->pcb_ext->ext_vm86;
281
282                 sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs;
283                 sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs;
284                 sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es;
285                 sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds;
286
287                 if (vm86->vm86_has_vme == 0)
288                         sf.sf_uc.uc_mcontext.mc_eflags =
289                             (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) |
290                             (vm86->vm86_eflags & (PSL_VIF | PSL_VIP));
291
292                 /*
293                  * Clear PSL_NT to inhibit T_TSSFLT faults on return from
294                  * syscalls made by the signal handler.  This just avoids
295                  * wasting time for our lazy fixup of such faults.  PSL_NT
296                  * does nothing in vm86 mode, but vm86 programs can set it
297                  * almost legitimately in probes for old cpu types.
298                  */
299                 tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP);
300         }
301 #endif
302
303         /*
304          * Copy the sigframe out to the user's stack.
305          */
306         if (copyout(&sf, sfp, sizeof(struct sigframe)) != 0) {
307                 /*
308                  * Something is wrong with the stack pointer.
309                  * ...Kill the process.
310                  */
311                 sigexit(p, SIGILL);
312         }
313
314         regs->tf_esp = (int)sfp;
315         regs->tf_eip = PS_STRINGS - *(p->p_sysent->sv_szsigcode);
316         regs->tf_eflags &= ~PSL_T;
317         regs->tf_cs = 0;
318         regs->tf_ds = 0;
319         regs->tf_es = 0;
320         regs->tf_fs = 0;
321         regs->tf_ss = 0;
322 }
323
324 /*
325  * Sanitize the trapframe for a virtual kernel passing control to a custom
326  * VM context.
327  *
328  * Allow userland to set or maintain PSL_RF, the resume flag.  This flag
329  * basically controls whether the return PC should skip the first instruction
330  * (as in an explicit system call) or re-execute it (as in an exception).
331  */
332 int
333 cpu_sanitize_frame(struct trapframe *frame)
334 {
335         frame->tf_cs = 0;
336         frame->tf_ds = 0;
337         frame->tf_es = 0;
338         frame->tf_fs = 0;
339         frame->tf_ss = 0;
340         frame->tf_eflags &= (PSL_USER | PSL_RF);
341         frame->tf_eflags |= PSL_RESERVED_DEFAULT | PSL_I;
342         return(0);
343 }
344
345 /*
346  * sigreturn(ucontext_t *sigcntxp)
347  *
348  * System call to cleanup state after a signal
349  * has been taken.  Reset signal mask and
350  * stack state from context left by sendsig (above).
351  * Return to previous pc and psl as specified by
352  * context left by sendsig. Check carefully to
353  * make sure that the user has not modified the
354  * state to gain improper privileges.
355  */
356 #define EFL_SECURE(ef, oef)     ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0)
357 #define CS_SECURE(cs)           (ISPL(cs) == SEL_UPL)
358
359 int
360 sys_sigreturn(struct sigreturn_args *uap)
361 {
362         struct lwp *lp = curthread->td_lwp;
363         struct trapframe *regs;
364         ucontext_t *ucp;
365         int cs, eflags;
366
367         ucp = uap->sigcntxp;
368
369         if (!useracc((caddr_t)ucp, sizeof(ucontext_t), VM_PROT_READ))
370                 return (EFAULT);
371
372         regs = lp->lwp_md.md_regs;
373         eflags = ucp->uc_mcontext.mc_eflags;
374
375 #if 0
376         if (eflags & PSL_VM) {
377                 struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs;
378                 struct vm86_kernel *vm86;
379
380                 /*
381                  * if pcb_ext == 0 or vm86_inited == 0, the user hasn't
382                  * set up the vm86 area, and we can't enter vm86 mode.
383                  */
384                 if (lp->lwp_thread->td_pcb->pcb_ext == 0)
385                         return (EINVAL);
386                 vm86 = &lp->lwp_thread->td_pcb->pcb_ext->ext_vm86;
387                 if (vm86->vm86_inited == 0)
388                         return (EINVAL);
389
390                 /* go back to user mode if both flags are set */
391                 if ((eflags & PSL_VIP) && (eflags & PSL_VIF))
392                         trapsignal(lp->lwp_proc, SIGBUS, 0);
393
394                 if (vm86->vm86_has_vme) {
395                         eflags = (tf->tf_eflags & ~VME_USERCHANGE) |
396                             (eflags & VME_USERCHANGE) | PSL_VM;
397                 } else {
398                         vm86->vm86_eflags = eflags;     /* save VIF, VIP */
399                         eflags = (tf->tf_eflags & ~VM_USERCHANGE) |                                         (eflags & VM_USERCHANGE) | PSL_VM;
400                 }
401                 bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe));
402                 tf->tf_eflags = eflags;
403                 tf->tf_vm86_ds = tf->tf_ds;
404                 tf->tf_vm86_es = tf->tf_es;
405                 tf->tf_vm86_fs = tf->tf_fs;
406                 tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs;
407                 tf->tf_ds = 0;
408                 tf->tf_es = 0;
409                 tf->tf_fs = 0;
410         } else 
411 #endif
412         {
413                 /*
414                  * Don't allow users to change privileged or reserved flags.
415                  */
416                 /*
417                  * XXX do allow users to change the privileged flag PSL_RF.
418                  * The cpu sets PSL_RF in tf_eflags for faults.  Debuggers
419                  * should sometimes set it there too.  tf_eflags is kept in
420                  * the signal context during signal handling and there is no
421                  * other place to remember it, so the PSL_RF bit may be
422                  * corrupted by the signal handler without us knowing.
423                  * Corruption of the PSL_RF bit at worst causes one more or
424                  * one less debugger trap, so allowing it is fairly harmless.
425                  */
426                 if (!EFL_SECURE(eflags & ~PSL_RF, regs->tf_eflags & ~PSL_RF)) {
427                         kprintf("sigreturn: eflags = 0x%x\n", eflags);
428                         return(EINVAL);
429                 }
430
431                 /*
432                  * Don't allow users to load a valid privileged %cs.  Let the
433                  * hardware check for invalid selectors, excess privilege in
434                  * other selectors, invalid %eip's and invalid %esp's.
435                  */
436                 cs = ucp->uc_mcontext.mc_cs;
437                 if (!CS_SECURE(cs)) {
438                         kprintf("sigreturn: cs = 0x%x\n", cs);
439                         trapsignal(lp->lwp_proc, SIGBUS, T_PROTFLT);
440                         return(EINVAL);
441                 }
442                 bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(struct trapframe));
443         }
444
445         if (ucp->uc_mcontext.mc_onstack & 1)
446                 lp->lwp_sigstk.ss_flags |= SS_ONSTACK;
447         else
448                 lp->lwp_sigstk.ss_flags &= ~SS_ONSTACK;
449
450         lp->lwp_sigmask = ucp->uc_sigmask;
451         SIG_CANTMASK(lp->lwp_sigmask);
452         return(EJUSTRETURN);
453 }
454
455 /*
456  * Stack frame on entry to function.  %eax will contain the function vector,
457  * %ecx will contain the function data.  flags, ecx, and eax will have 
458  * already been pushed on the stack.
459  */
460 struct upc_frame {
461         register_t      eax;
462         register_t      ecx;
463         register_t      edx;
464         register_t      flags;
465         register_t      oldip;
466 };
467
468 void
469 sendupcall(struct vmupcall *vu, int morepending)
470 {
471         struct lwp *lp = curthread->td_lwp;
472         struct trapframe *regs;
473         struct upcall upcall;
474         struct upc_frame upc_frame;
475         int     crit_count = 0;
476
477         /*
478          * Get the upcall data structure
479          */
480         if (copyin(lp->lwp_upcall, &upcall, sizeof(upcall)) ||
481             copyin((char *)upcall.upc_uthread + upcall.upc_critoff, &crit_count, sizeof(int))
482         ) {
483                 vu->vu_pending = 0;
484                 kprintf("bad upcall address\n");
485                 return;
486         }
487
488         /*
489          * If the data structure is already marked pending or has a critical
490          * section count, mark the data structure as pending and return 
491          * without doing an upcall.  vu_pending is left set.
492          */
493         if (upcall.upc_pending || crit_count >= vu->vu_pending) {
494                 if (upcall.upc_pending < vu->vu_pending) {
495                         upcall.upc_pending = vu->vu_pending;
496                         copyout(&upcall.upc_pending, &lp->lwp_upcall->upc_pending,
497                                 sizeof(upcall.upc_pending));
498                 }
499                 return;
500         }
501
502         /*
503          * We can run this upcall now, clear vu_pending.
504          *
505          * Bump our critical section count and set or clear the
506          * user pending flag depending on whether more upcalls are
507          * pending.  The user will be responsible for calling 
508          * upc_dispatch(-1) to process remaining upcalls.
509          */
510         vu->vu_pending = 0;
511         upcall.upc_pending = morepending;
512         crit_count += TDPRI_CRIT;
513         copyout(&upcall.upc_pending, &lp->lwp_upcall->upc_pending, 
514                 sizeof(upcall.upc_pending));
515         copyout(&crit_count, (char *)upcall.upc_uthread + upcall.upc_critoff,
516                 sizeof(int));
517
518         /*
519          * Construct a stack frame and issue the upcall
520          */
521         regs = lp->lwp_md.md_regs;
522         upc_frame.eax = regs->tf_eax;
523         upc_frame.ecx = regs->tf_ecx;
524         upc_frame.edx = regs->tf_edx;
525         upc_frame.flags = regs->tf_eflags;
526         upc_frame.oldip = regs->tf_eip;
527         if (copyout(&upc_frame, (void *)(regs->tf_esp - sizeof(upc_frame)),
528             sizeof(upc_frame)) != 0) {
529                 kprintf("bad stack on upcall\n");
530         } else {
531                 regs->tf_eax = (register_t)vu->vu_func;
532                 regs->tf_ecx = (register_t)vu->vu_data;
533                 regs->tf_edx = (register_t)lp->lwp_upcall;
534                 regs->tf_eip = (register_t)vu->vu_ctx;
535                 regs->tf_esp -= sizeof(upc_frame);
536         }
537 }
538
539 /*
540  * fetchupcall occurs in the context of a system call, which means that
541  * we have to return EJUSTRETURN in order to prevent eax and edx from
542  * being overwritten by the syscall return value.
543  *
544  * if vu is not NULL we return the new context in %edx, the new data in %ecx,
545  * and the function pointer in %eax.  
546  */
547 int
548 fetchupcall (struct vmupcall *vu, int morepending, void *rsp)
549 {
550         struct upc_frame upc_frame;
551         struct lwp *lp = curthread->td_lwp;
552         struct trapframe *regs;
553         int error;
554         struct upcall upcall;
555         int crit_count;
556
557         regs = lp->lwp_md.md_regs;
558
559         error = copyout(&morepending, &lp->lwp_upcall->upc_pending, sizeof(int));
560         if (error == 0) {
561             if (vu) {
562                 /*
563                  * This jumps us to the next ready context.
564                  */
565                 vu->vu_pending = 0;
566                 error = copyin(lp->lwp_upcall, &upcall, sizeof(upcall));
567                 crit_count = 0;
568                 if (error == 0)
569                         error = copyin((char *)upcall.upc_uthread + upcall.upc_critoff, &crit_count, sizeof(int));
570                 crit_count += TDPRI_CRIT;
571                 if (error == 0)
572                         error = copyout(&crit_count, (char *)upcall.upc_uthread + upcall.upc_critoff, sizeof(int));
573                 regs->tf_eax = (register_t)vu->vu_func;
574                 regs->tf_ecx = (register_t)vu->vu_data;
575                 regs->tf_edx = (register_t)lp->lwp_upcall;
576                 regs->tf_eip = (register_t)vu->vu_ctx;
577                 regs->tf_esp = (register_t)rsp;
578             } else {
579                 /*
580                  * This returns us to the originally interrupted code.
581                  */
582                 error = copyin(rsp, &upc_frame, sizeof(upc_frame));
583                 regs->tf_eax = upc_frame.eax;
584                 regs->tf_ecx = upc_frame.ecx;
585                 regs->tf_edx = upc_frame.edx;
586                 regs->tf_eflags = (regs->tf_eflags & ~PSL_USERCHANGE) |
587                                 (upc_frame.flags & PSL_USERCHANGE);
588                 regs->tf_eip = upc_frame.oldip;
589                 regs->tf_esp = (register_t)((char *)rsp + sizeof(upc_frame));
590             }
591         }
592         if (error == 0)
593                 error = EJUSTRETURN;
594         return(error);
595 }
596
597 /*
598  * cpu_idle() represents the idle LWKT.  You cannot return from this function
599  * (unless you want to blow things up!).  Instead we look for runnable threads
600  * and loop or halt as appropriate.  Giant is not held on entry to the thread.
601  *
602  * The main loop is entered with a critical section held, we must release
603  * the critical section before doing anything else.  lwkt_switch() will
604  * check for pending interrupts due to entering and exiting its own 
605  * critical section.
606  *
607  * Note on cpu_idle_hlt:  On an SMP system we rely on a scheduler IPI
608  * to wake a HLTed cpu up.  However, there are cases where the idlethread
609  * will be entered with the possibility that no IPI will occur and in such
610  * cases lwkt_switch() sets TDF_IDLE_NOHLT.
611  */
612 static int      cpu_idle_hlt = 1;
613 static int      cpu_idle_hltcnt;
614 static int      cpu_idle_spincnt;
615 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hlt, CTLFLAG_RW,
616     &cpu_idle_hlt, 0, "Idle loop HLT enable");
617 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hltcnt, CTLFLAG_RW,
618     &cpu_idle_hltcnt, 0, "Idle loop entry halts");
619 SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_spincnt, CTLFLAG_RW,
620     &cpu_idle_spincnt, 0, "Idle loop entry spins");
621
622 static void
623 cpu_idle_default_hook(void)
624 {
625         /*
626          * We must guarentee that hlt is exactly the instruction
627          * following the sti.
628          */
629         __asm __volatile("hlt");        /* sti; hlt */
630 }
631
632 /* Other subsystems (e.g., ACPI) can hook this later. */
633 void (*cpu_idle_hook)(void) = cpu_idle_default_hook;
634
635 void
636 cpu_idle(void)
637 {
638         struct thread *td = curthread;
639
640         crit_exit();
641         KKASSERT(td->td_pri < TDPRI_CRIT);
642         for (;;) {
643                 /*
644                  * See if there are any LWKTs ready to go.
645                  */
646                 lwkt_switch();
647
648                 /*
649                  * If we are going to halt call splz unconditionally after
650                  * CLIing to catch any interrupt races.  Note that we are
651                  * at SPL0 and interrupts are enabled.
652                  */
653                 if (cpu_idle_hlt && !lwkt_runnable() &&
654                     (td->td_flags & TDF_IDLE_NOHLT) == 0) {
655                         /* __asm __volatile("cli"); */
656                         splz();
657                         if (!lwkt_runnable())
658                             cpu_idle_hook();
659 #ifdef SMP
660                         else
661                             __asm __volatile("pause");
662 #endif
663                         ++cpu_idle_hltcnt;
664                 } else {
665                         td->td_flags &= ~TDF_IDLE_NOHLT;
666                         splz();
667 #ifdef SMP
668                         /*__asm __volatile("sti; pause");*/
669                         __asm __volatile("pause");
670 #else
671                         /*__asm __volatile("sti");*/
672 #endif
673                         ++cpu_idle_spincnt;
674                 }
675         }
676 }
677
678 /*
679  * Clear registers on exec
680  */
681 void
682 setregs(struct lwp *lp, u_long entry, u_long stack, u_long ps_strings)
683 {
684         struct trapframe *regs = lp->lwp_md.md_regs;
685         struct pcb *pcb = lp->lwp_thread->td_pcb;
686
687         /* Reset pc->pcb_gs and %gs before possibly invalidating it. */
688         pcb->pcb_gs = 0;
689 #if 0
690         load_gs(_udatasel);
691 #endif
692
693         /* was i386_user_cleanup() in NetBSD */
694         user_ldt_free(pcb);
695   
696         bzero((char *)regs, sizeof(struct trapframe));
697         regs->tf_eip = entry;
698         regs->tf_esp = stack;
699         regs->tf_eflags = PSL_USER | (regs->tf_eflags & PSL_T);
700         regs->tf_ss = 0;
701         regs->tf_ds = 0;
702         regs->tf_es = 0;
703         regs->tf_fs = 0;
704         regs->tf_cs = 0;
705
706         /* PS_STRINGS value for BSD/OS binaries.  It is 0 for non-BSD/OS. */
707         regs->tf_ebx = ps_strings;
708
709         /*
710          * Reset the hardware debug registers if they were in use.
711          * They won't have any meaning for the newly exec'd process.  
712          */
713         if (pcb->pcb_flags & PCB_DBREGS) {
714                 pcb->pcb_dr0 = 0;
715                 pcb->pcb_dr1 = 0;
716                 pcb->pcb_dr2 = 0;
717                 pcb->pcb_dr3 = 0;
718                 pcb->pcb_dr6 = 0;
719                 pcb->pcb_dr7 = 0;
720                 if (pcb == curthread->td_pcb) {
721                         /*
722                          * Clear the debug registers on the running
723                          * CPU, otherwise they will end up affecting
724                          * the next process we switch to.
725                          */
726                         reset_dbregs();
727                 }
728                 pcb->pcb_flags &= ~PCB_DBREGS;
729         }
730
731         /*
732          * Initialize the math emulator (if any) for the current process.
733          * Actually, just clear the bit that says that the emulator has
734          * been initialized.  Initialization is delayed until the process
735          * traps to the emulator (if it is done at all) mainly because
736          * emulators don't provide an entry point for initialization.
737          */
738         lp->lwp_thread->td_pcb->pcb_flags &= ~FP_SOFTFP;
739
740         /*
741          * note: do not set CR0_TS here.  npxinit() must do it after clearing
742          * gd_npxthread.  Otherwise a preemptive interrupt thread may panic
743          * in npxdna().
744          */
745         crit_enter();
746 #if 0
747         load_cr0(rcr0() | CR0_MP);
748 #endif
749
750 #if NNPX > 0
751         /* Initialize the npx (if any) for the current process. */
752         npxinit(__INITIAL_NPXCW__);
753 #endif
754         crit_exit();
755
756         /*
757          * note: linux emulator needs edx to be 0x0 on entry, which is
758          * handled in execve simply by setting the 64 bit syscall
759          * return value to 0.
760          */
761 }
762
763 void
764 cpu_setregs(void)
765 {
766 #if 0
767         unsigned int cr0;
768
769         cr0 = rcr0();
770         cr0 |= CR0_NE;                  /* Done by npxinit() */
771         cr0 |= CR0_MP | CR0_TS;         /* Done at every execve() too. */
772 #ifdef I386_CPU
773         if (cpu_class != CPUCLASS_386)
774 #endif
775                 cr0 |= CR0_WP | CR0_AM;
776         load_cr0(cr0);
777         load_gs(_udatasel);
778 #endif
779 }
780
781 static int
782 sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS)
783 {
784         int error;
785         error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2,
786                 req);
787         if (!error && req->newptr)
788                 resettodr();
789         return (error);
790 }
791
792 SYSCTL_PROC(_machdep, CPU_ADJKERNTZ, adjkerntz, CTLTYPE_INT|CTLFLAG_RW,
793         &adjkerntz, 0, sysctl_machdep_adjkerntz, "I", "");
794
795 extern u_long bootdev;          /* not a cdev_t - encoding is different */
796 SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev,
797         CTLFLAG_RD, &bootdev, 0, "Boot device (not in cdev_t format)");
798
799 /*
800  * Initialize 386 and configure to run kernel
801  */
802
803 /*
804  * Initialize segments & interrupt table
805  */
806
807 extern  struct user *proc0paddr;
808
809 #if 0
810
811 extern inthand_t
812         IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl),
813         IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm),
814         IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot),
815         IDTVEC(page), IDTVEC(mchk), IDTVEC(fpu), IDTVEC(align),
816         IDTVEC(xmm), IDTVEC(syscall),
817         IDTVEC(rsvd0);
818 extern inthand_t
819         IDTVEC(int0x80_syscall);
820
821 #endif
822
823 #ifdef DEBUG_INTERRUPTS
824 extern inthand_t *Xrsvdary[256];
825 #endif
826
827 int
828 ptrace_set_pc(struct proc *p, unsigned long addr)
829 {
830         p->p_md.md_regs->tf_eip = addr;
831         return (0);
832 }
833
834 int
835 ptrace_single_step(struct lwp *lp)
836 {
837         lp->lwp_md.md_regs->tf_eflags |= PSL_T;
838         return (0);
839 }
840
841 int
842 fill_regs(struct lwp *lp, struct reg *regs)
843 {
844         struct pcb *pcb;
845         struct trapframe *tp;
846
847         tp = lp->lwp_md.md_regs;
848         regs->r_fs = tp->tf_fs;
849         regs->r_es = tp->tf_es;
850         regs->r_ds = tp->tf_ds;
851         regs->r_edi = tp->tf_edi;
852         regs->r_esi = tp->tf_esi;
853         regs->r_ebp = tp->tf_ebp;
854         regs->r_ebx = tp->tf_ebx;
855         regs->r_edx = tp->tf_edx;
856         regs->r_ecx = tp->tf_ecx;
857         regs->r_eax = tp->tf_eax;
858         regs->r_eip = tp->tf_eip;
859         regs->r_cs = tp->tf_cs;
860         regs->r_eflags = tp->tf_eflags;
861         regs->r_esp = tp->tf_esp;
862         regs->r_ss = tp->tf_ss;
863         pcb = lp->lwp_thread->td_pcb;
864         regs->r_gs = pcb->pcb_gs;
865         return (0);
866 }
867
868 int
869 set_regs(struct lwp *lp, struct reg *regs)
870 {
871         struct pcb *pcb;
872         struct trapframe *tp;
873
874         tp = lp->lwp_md.md_regs;
875         if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) ||
876             !CS_SECURE(regs->r_cs))
877                 return (EINVAL);
878         tp->tf_fs = regs->r_fs;
879         tp->tf_es = regs->r_es;
880         tp->tf_ds = regs->r_ds;
881         tp->tf_edi = regs->r_edi;
882         tp->tf_esi = regs->r_esi;
883         tp->tf_ebp = regs->r_ebp;
884         tp->tf_ebx = regs->r_ebx;
885         tp->tf_edx = regs->r_edx;
886         tp->tf_ecx = regs->r_ecx;
887         tp->tf_eax = regs->r_eax;
888         tp->tf_eip = regs->r_eip;
889         tp->tf_cs = regs->r_cs;
890         tp->tf_eflags = regs->r_eflags;
891         tp->tf_esp = regs->r_esp;
892         tp->tf_ss = regs->r_ss;
893         pcb = lp->lwp_thread->td_pcb;
894         pcb->pcb_gs = regs->r_gs;
895         return (0);
896 }
897
898 #ifndef CPU_DISABLE_SSE
899 static void
900 fill_fpregs_xmm(struct savexmm *sv_xmm, struct save87 *sv_87)
901 {
902         struct env87 *penv_87 = &sv_87->sv_env;
903         struct envxmm *penv_xmm = &sv_xmm->sv_env;
904         int i;
905
906         /* FPU control/status */
907         penv_87->en_cw = penv_xmm->en_cw;
908         penv_87->en_sw = penv_xmm->en_sw;
909         penv_87->en_tw = penv_xmm->en_tw;
910         penv_87->en_fip = penv_xmm->en_fip;
911         penv_87->en_fcs = penv_xmm->en_fcs;
912         penv_87->en_opcode = penv_xmm->en_opcode;
913         penv_87->en_foo = penv_xmm->en_foo;
914         penv_87->en_fos = penv_xmm->en_fos;
915
916         /* FPU registers */
917         for (i = 0; i < 8; ++i)
918                 sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc;
919
920         sv_87->sv_ex_sw = sv_xmm->sv_ex_sw;
921 }
922
923 static void
924 set_fpregs_xmm(struct save87 *sv_87, struct savexmm *sv_xmm)
925 {
926         struct env87 *penv_87 = &sv_87->sv_env;
927         struct envxmm *penv_xmm = &sv_xmm->sv_env;
928         int i;
929
930         /* FPU control/status */
931         penv_xmm->en_cw = penv_87->en_cw;
932         penv_xmm->en_sw = penv_87->en_sw;
933         penv_xmm->en_tw = penv_87->en_tw;
934         penv_xmm->en_fip = penv_87->en_fip;
935         penv_xmm->en_fcs = penv_87->en_fcs;
936         penv_xmm->en_opcode = penv_87->en_opcode;
937         penv_xmm->en_foo = penv_87->en_foo;
938         penv_xmm->en_fos = penv_87->en_fos;
939
940         /* FPU registers */
941         for (i = 0; i < 8; ++i)
942                 sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i];
943
944         sv_xmm->sv_ex_sw = sv_87->sv_ex_sw;
945 }
946 #endif /* CPU_DISABLE_SSE */
947
948 int
949 fill_fpregs(struct lwp *lp, struct fpreg *fpregs)
950 {
951 #ifndef CPU_DISABLE_SSE
952         if (cpu_fxsr) {
953                 fill_fpregs_xmm(&lp->lwp_thread->td_pcb->pcb_save.sv_xmm,
954                                 (struct save87 *)fpregs);
955                 return (0);
956         }
957 #endif /* CPU_DISABLE_SSE */
958         bcopy(&lp->lwp_thread->td_pcb->pcb_save.sv_87, fpregs, sizeof *fpregs);
959         return (0);
960 }
961
962 int
963 set_fpregs(struct lwp *lp, struct fpreg *fpregs)
964 {
965 #ifndef CPU_DISABLE_SSE
966         if (cpu_fxsr) {
967                 set_fpregs_xmm((struct save87 *)fpregs,
968                                &lp->lwp_thread->td_pcb->pcb_save.sv_xmm);
969                 return (0);
970         }
971 #endif /* CPU_DISABLE_SSE */
972         bcopy(fpregs, &lp->lwp_thread->td_pcb->pcb_save.sv_87, sizeof *fpregs);
973         return (0);
974 }
975
976 int
977 fill_dbregs(struct lwp *lp, struct dbreg *dbregs)
978 {
979         if (lp == NULL) {
980                 dbregs->dr0 = rdr0();
981                 dbregs->dr1 = rdr1();
982                 dbregs->dr2 = rdr2();
983                 dbregs->dr3 = rdr3();
984                 dbregs->dr4 = rdr4();
985                 dbregs->dr5 = rdr5();
986                 dbregs->dr6 = rdr6();
987                 dbregs->dr7 = rdr7();
988         } else {
989                 struct pcb *pcb;
990
991                 pcb = lp->lwp_thread->td_pcb;
992                 dbregs->dr0 = pcb->pcb_dr0;
993                 dbregs->dr1 = pcb->pcb_dr1;
994                 dbregs->dr2 = pcb->pcb_dr2;
995                 dbregs->dr3 = pcb->pcb_dr3;
996                 dbregs->dr4 = 0;
997                 dbregs->dr5 = 0;
998                 dbregs->dr6 = pcb->pcb_dr6;
999                 dbregs->dr7 = pcb->pcb_dr7;
1000         }
1001         return (0);
1002 }
1003
1004 int
1005 set_dbregs(struct lwp *lp, struct dbreg *dbregs)
1006 {
1007         if (lp == NULL) {
1008                 load_dr0(dbregs->dr0);
1009                 load_dr1(dbregs->dr1);
1010                 load_dr2(dbregs->dr2);
1011                 load_dr3(dbregs->dr3);
1012                 load_dr4(dbregs->dr4);
1013                 load_dr5(dbregs->dr5);
1014                 load_dr6(dbregs->dr6);
1015                 load_dr7(dbregs->dr7);
1016         } else {
1017                 struct pcb *pcb;
1018                 struct ucred *ucred;
1019                 int i;
1020                 uint32_t mask1, mask2;
1021
1022                 /*
1023                  * Don't let an illegal value for dr7 get set.  Specifically,
1024                  * check for undefined settings.  Setting these bit patterns
1025                  * result in undefined behaviour and can lead to an unexpected
1026                  * TRCTRAP.
1027                  */
1028                 for (i = 0, mask1 = 0x3<<16, mask2 = 0x2<<16; i < 8; 
1029                      i++, mask1 <<= 2, mask2 <<= 2)
1030                         if ((dbregs->dr7 & mask1) == mask2)
1031                                 return (EINVAL);
1032                 
1033                 pcb = lp->lwp_thread->td_pcb;
1034                 ucred = lp->lwp_proc->p_ucred;
1035
1036                 /*
1037                  * Don't let a process set a breakpoint that is not within the
1038                  * process's address space.  If a process could do this, it
1039                  * could halt the system by setting a breakpoint in the kernel
1040                  * (if ddb was enabled).  Thus, we need to check to make sure
1041                  * that no breakpoints are being enabled for addresses outside
1042                  * process's address space, unless, perhaps, we were called by
1043                  * uid 0.
1044                  *
1045                  * XXX - what about when the watched area of the user's
1046                  * address space is written into from within the kernel
1047                  * ... wouldn't that still cause a breakpoint to be generated
1048                  * from within kernel mode?
1049                  */
1050
1051                 if (suser_cred(ucred, 0) != 0) {
1052                         if (dbregs->dr7 & 0x3) {
1053                                 /* dr0 is enabled */
1054                                 if (dbregs->dr0 >= VM_MAX_USER_ADDRESS)
1055                                         return (EINVAL);
1056                         }
1057
1058                         if (dbregs->dr7 & (0x3<<2)) {
1059                                 /* dr1 is enabled */
1060                                 if (dbregs->dr1 >= VM_MAX_USER_ADDRESS)
1061                                         return (EINVAL);
1062                         }
1063
1064                         if (dbregs->dr7 & (0x3<<4)) {
1065                                 /* dr2 is enabled */
1066                                 if (dbregs->dr2 >= VM_MAX_USER_ADDRESS)
1067                                         return (EINVAL);
1068                         }
1069
1070                         if (dbregs->dr7 & (0x3<<6)) {
1071                                 /* dr3 is enabled */
1072                                 if (dbregs->dr3 >= VM_MAX_USER_ADDRESS)
1073                                         return (EINVAL);
1074                         }
1075                 }
1076
1077                 pcb->pcb_dr0 = dbregs->dr0;
1078                 pcb->pcb_dr1 = dbregs->dr1;
1079                 pcb->pcb_dr2 = dbregs->dr2;
1080                 pcb->pcb_dr3 = dbregs->dr3;
1081                 pcb->pcb_dr6 = dbregs->dr6;
1082                 pcb->pcb_dr7 = dbregs->dr7;
1083
1084                 pcb->pcb_flags |= PCB_DBREGS;
1085         }
1086
1087         return (0);
1088 }
1089
1090 #if 0
1091 /*
1092  * Return > 0 if a hardware breakpoint has been hit, and the
1093  * breakpoint was in user space.  Return 0, otherwise.
1094  */
1095 int
1096 user_dbreg_trap(void)
1097 {
1098         u_int32_t dr7, dr6; /* debug registers dr6 and dr7 */
1099         u_int32_t bp;       /* breakpoint bits extracted from dr6 */
1100         int nbp;            /* number of breakpoints that triggered */
1101         caddr_t addr[4];    /* breakpoint addresses */
1102         int i;
1103         
1104         dr7 = rdr7();
1105         if ((dr7 & 0x000000ff) == 0) {
1106                 /*
1107                  * all GE and LE bits in the dr7 register are zero,
1108                  * thus the trap couldn't have been caused by the
1109                  * hardware debug registers
1110                  */
1111                 return 0;
1112         }
1113
1114         nbp = 0;
1115         dr6 = rdr6();
1116         bp = dr6 & 0x0000000f;
1117
1118         if (!bp) {
1119                 /*
1120                  * None of the breakpoint bits are set meaning this
1121                  * trap was not caused by any of the debug registers
1122                  */
1123                 return 0;
1124         }
1125
1126         /*
1127          * at least one of the breakpoints were hit, check to see
1128          * which ones and if any of them are user space addresses
1129          */
1130
1131         if (bp & 0x01) {
1132                 addr[nbp++] = (caddr_t)rdr0();
1133         }
1134         if (bp & 0x02) {
1135                 addr[nbp++] = (caddr_t)rdr1();
1136         }
1137         if (bp & 0x04) {
1138                 addr[nbp++] = (caddr_t)rdr2();
1139         }
1140         if (bp & 0x08) {
1141                 addr[nbp++] = (caddr_t)rdr3();
1142         }
1143
1144         for (i=0; i<nbp; i++) {
1145                 if (addr[i] <
1146                     (caddr_t)VM_MAX_USER_ADDRESS) {
1147                         /*
1148                          * addr[i] is in user space
1149                          */
1150                         return nbp;
1151                 }
1152         }
1153
1154         /*
1155          * None of the breakpoints are in user space.
1156          */
1157         return 0;
1158 }
1159
1160 #endif
1161
1162
1163 #ifndef DDB
1164 void
1165 Debugger(const char *msg)
1166 {
1167         kprintf("Debugger(\"%s\") called.\n", msg);
1168 }
1169 #endif /* no DDB */
1170
1171 #include <sys/disklabel.h>
1172
1173 /*
1174  * Determine the size of the transfer, and make sure it is
1175  * within the boundaries of the partition. Adjust transfer
1176  * if needed, and signal errors or early completion.
1177  *
1178  * On success a new bio layer is pushed with the translated
1179  * block number, and returned.
1180  */
1181 struct bio *
1182 bounds_check_with_label(cdev_t dev, struct bio *bio,
1183                         struct disklabel *lp, int wlabel)
1184 {
1185         struct bio *nbio;
1186         struct buf *bp = bio->bio_buf;
1187         struct partition *p = lp->d_partitions + dkpart(dev);
1188         int labelsect = lp->d_partitions[0].p_offset;
1189         int maxsz = p->p_size,
1190                 sz = (bp->b_bcount + DEV_BSIZE - 1) >> DEV_BSHIFT;
1191         daddr_t blkno = (daddr_t)(bio->bio_offset >> DEV_BSHIFT);
1192
1193         /* overwriting disk label ? */
1194         /* XXX should also protect bootstrap in first 8K */
1195         if (blkno + p->p_offset <= LABELSECTOR + labelsect &&
1196 #if LABELSECTOR != 0
1197             blkno + p->p_offset + sz > LABELSECTOR + labelsect &&
1198 #endif
1199             bp->b_cmd != BUF_CMD_READ && wlabel == 0) {
1200                 bp->b_error = EROFS;
1201                 goto error;
1202         }
1203
1204 #if     defined(DOSBBSECTOR) && defined(notyet)
1205         /* overwriting master boot record? */
1206         if (blkno + p->p_offset <= DOSBBSECTOR &&
1207             bp->b_cmd != BUF_CMD_READ && wlabel == 0) {
1208                 bp->b_error = EROFS;
1209                 goto error;
1210         }
1211 #endif
1212
1213         /*
1214          * Check for out of bounds, EOF, and EOF clipping.
1215          */
1216         if (bio->bio_offset < 0)
1217                 goto bad;
1218         if (blkno + sz > maxsz) {
1219                 /*
1220                  * Past EOF or B_BNOCLIP flag was set, the request is bad.
1221                  */
1222                 if (blkno > maxsz || (bp->b_flags & B_BNOCLIP))
1223                         goto bad;
1224
1225                 /*
1226                  * If exactly on EOF just complete the I/O with no bytes
1227                  * transfered.  B_INVAL must be set to throw away the
1228                  * contents of the buffer.  Otherwise clip b_bcount.
1229                  */
1230                 if (blkno == maxsz) {
1231                         bp->b_resid = bp->b_bcount;
1232                         bp->b_flags |= B_INVAL;
1233                         goto done;
1234                 }
1235                 bp->b_bcount = (maxsz - blkno) << DEV_BSHIFT;
1236         }
1237         nbio = push_bio(bio);
1238         nbio->bio_offset = bio->bio_offset + ((off_t)p->p_offset << DEV_BSHIFT);
1239         return (nbio);
1240
1241         /*
1242          * The caller is responsible for calling biodone() on the passed bio
1243          * when we return NULL.
1244          */
1245 bad:
1246         bp->b_error = EINVAL;
1247 error:
1248         bp->b_resid = bp->b_bcount;
1249         bp->b_flags |= B_ERROR | B_INVAL;
1250 done:
1251         return (NULL);
1252 }
1253