sys/vfs/hammer: Add hammer_xlate_to_phys()

[dragonfly.git] / sys / vfs / hammer / hammer_io.c

/*
 * Copyright (c) 2007-2008 The DragonFly Project.  All rights reserved.
 *
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * IO Primitives and buffer cache management
 *
 * All major data-tracking structures in HAMMER contain a struct hammer_io
 * which is used to manage their backing store.  We use filesystem buffers
 * for backing store and we leave them passively associated with their
 * HAMMER structures.
 *
 * If the kernel tries to destroy a passively associated buf which we cannot
 * yet let go we set B_LOCKED in the buffer and then actively released it
 * later when we can.
 *
 * The io_token is required for anything which might race bioops and bio_done
 * callbacks, with one exception: A successful hammer_try_interlock_norefs().
 * the fs_token will be held in all other cases.
 */

#include <sys/buf2.h>

#include "hammer.h"

static void hammer_io_modify(hammer_io_t io, int count);
static void hammer_io_deallocate(struct buf *bp);
static void hammer_indirect_callback(struct bio *bio);
static void hammer_io_direct_write_complete(struct bio *nbio);
static int hammer_io_direct_uncache_callback(hammer_inode_t ip, void *data);
static void hammer_io_set_modlist(struct hammer_io *io);
static __inline void hammer_io_flush_mark(hammer_volume_t volume);
static struct bio_ops hammer_bioops;

static int
hammer_mod_rb_compare(hammer_io_t io1, hammer_io_t io2)
{
        hammer_off_t io1_offset;
        hammer_off_t io2_offset;

        /*
         * Encoded offsets are neither valid block device offsets
         * nor valid zone-X offsets.
         */
        io1_offset = HAMMER_ENCODE(0, io1->volume->vol_no, io1->offset);
        io2_offset = HAMMER_ENCODE(0, io2->volume->vol_no, io2->offset);

        if (io1_offset < io2_offset)
                return(-1);
        if (io1_offset > io2_offset)
                return(1);
        return(0);
}

RB_GENERATE(hammer_mod_rb_tree, hammer_io, rb_node, hammer_mod_rb_compare);

/*
 * Initialize a new, already-zero'd hammer_io structure, or reinitialize
 * an existing hammer_io structure which may have switched to another type.
 */
void
hammer_io_init(hammer_io_t io, hammer_volume_t volume, enum hammer_io_type type)
{
        io->volume = volume;
        io->hmp = volume->io.hmp;
        io->type = type;
}

/*
 * Helper routine to disassociate a buffer cache buffer from an I/O
 * structure.  The io must be interlocked and marked appropriately for
 * reclamation.
 *
 * The io must be in a released state with the io->bp owned and
 * locked by the caller of this function.  When not called from an
 * io_deallocate() this cannot race an io_deallocate() since the
 * kernel would be unable to get the buffer lock in that case.
 * (The released state in this case means we own the bp, not the
 * hammer_io structure).
 *
 * The io may have 0 or 1 references depending on who called us.  The
 * caller is responsible for dealing with the refs.
 *
 * This call can only be made when no action is required on the buffer.
 *
 * This function is guaranteed not to race against anything because we
 * own both the io lock and the bp lock and are interlocked with no
 * references.
 */
static void
hammer_io_disassociate(hammer_io_t io)
{
        struct buf *bp = io->bp;

        KKASSERT(io->released);
        KKASSERT(io->modified == 0);
        KKASSERT(hammer_buf_peek_io(bp) == io);
        buf_dep_init(bp);
        io->bp = NULL;

        /*
         * If the buffer was locked someone wanted to get rid of it.
         */
        if (bp->b_flags & B_LOCKED) {
                atomic_add_int(&hammer_count_io_locked, -1);
                bp->b_flags &= ~B_LOCKED;
        }
        if (io->reclaim) {
                bp->b_flags |= B_NOCACHE|B_RELBUF;
                io->reclaim = 0;
        }

        switch(io->type) {
        case HAMMER_STRUCTURE_VOLUME:
                HAMMER_ITOV(io)->ondisk = NULL;
                break;
        case HAMMER_STRUCTURE_DATA_BUFFER:
        case HAMMER_STRUCTURE_META_BUFFER:
        case HAMMER_STRUCTURE_UNDO_BUFFER:
                HAMMER_ITOB(io)->ondisk = NULL;
                break;
        case HAMMER_STRUCTURE_DUMMY:
                hpanic("bad io type");
                break;
        }
}

/*
 * Wait for any physical IO to complete
 *
 * XXX we aren't interlocked against a spinlock or anything so there
 *     is a small window in the interlock / io->running == 0 test.
 */
void
hammer_io_wait(hammer_io_t io)
{
        if (io->running) {
                hammer_mount_t hmp = io->hmp;

                lwkt_gettoken(&hmp->io_token);
                while (io->running) {
                        io->waiting = 1;
                        tsleep_interlock(io, 0);
                        if (io->running)
                                tsleep(io, PINTERLOCKED, "hmrflw", hz);
                }
                lwkt_reltoken(&hmp->io_token);
        }
}

/*
 * Wait for all currently queued HAMMER-initiated I/Os to complete.
 *
 * This is not supposed to count direct I/O's but some can leak
 * through (for non-full-sized direct I/Os).
 */
void
hammer_io_wait_all(hammer_mount_t hmp, const char *ident, int doflush)
{
        struct hammer_io iodummy;
        hammer_io_t io;

        /*
         * Degenerate case, no I/O is running
         */
        lwkt_gettoken(&hmp->io_token);
        if (TAILQ_EMPTY(&hmp->iorun_list)) {
                lwkt_reltoken(&hmp->io_token);
                if (doflush)
                        hammer_io_flush_sync(hmp);
                return;
        }
        bzero(&iodummy, sizeof(iodummy));
        iodummy.type = HAMMER_STRUCTURE_DUMMY;

        /*
         * Add placemarker and then wait until it becomes the head of
         * the list.
         */
        TAILQ_INSERT_TAIL(&hmp->iorun_list, &iodummy, iorun_entry);
        while (TAILQ_FIRST(&hmp->iorun_list) != &iodummy) {
                tsleep(&iodummy, 0, ident, 0);
        }

        /*
         * Chain in case several placemarkers are present.
         */
        TAILQ_REMOVE(&hmp->iorun_list, &iodummy, iorun_entry);
        io = TAILQ_FIRST(&hmp->iorun_list);
        if (io && io->type == HAMMER_STRUCTURE_DUMMY)
                wakeup(io);
        lwkt_reltoken(&hmp->io_token);

        if (doflush)
                hammer_io_flush_sync(hmp);
}

/*
 * Clear a flagged error condition on a I/O buffer.  The caller must hold
 * its own ref on the buffer.
 */
void
hammer_io_clear_error(struct hammer_io *io)
{
        hammer_mount_t hmp = io->hmp;

        lwkt_gettoken(&hmp->io_token);
        if (io->ioerror) {
                io->ioerror = 0;
                hammer_rel(&io->lock);
                KKASSERT(hammer_isactive(&io->lock));
        }
        lwkt_reltoken(&hmp->io_token);
}

void
hammer_io_clear_error_noassert(struct hammer_io *io)
{
        hammer_mount_t hmp = io->hmp;

        lwkt_gettoken(&hmp->io_token);
        if (io->ioerror) {
                io->ioerror = 0;
                hammer_rel(&io->lock);
        }
        lwkt_reltoken(&hmp->io_token);
}

/*
 * This is an advisory function only which tells the buffer cache
 * the bp is not a meta-data buffer, even though it is backed by
 * a block device.
 *
 * This is used by HAMMER's reblocking code to avoid trying to
 * swapcache the filesystem's data when it is read or written
 * by the reblocking code.
 *
 * The caller has a ref on the buffer preventing the bp from
 * being disassociated from it.
 */
void
hammer_io_notmeta(hammer_buffer_t buffer)
{
        if ((buffer->io.bp->b_flags & B_NOTMETA) == 0) {
                hammer_mount_t hmp = buffer->io.hmp;

                lwkt_gettoken(&hmp->io_token);
                buffer->io.bp->b_flags |= B_NOTMETA;
                lwkt_reltoken(&hmp->io_token);
        }
}

/*
 * Load bp for a HAMMER structure.  The io must be exclusively locked by
 * the caller.
 *
 * This routine is mostly used on meta-data and small-data blocks.  Generally
 * speaking HAMMER assumes some locality of reference and will cluster.
 *
 * Note that the caller (hammer_ondisk.c) may place further restrictions
 * on clusterability via the limit (in bytes).  Typically large-data
 * zones cannot be clustered due to their mixed buffer sizes.  This is
 * not an issue since such clustering occurs in hammer_vnops at the
 * regular file layer, whereas this is the buffered block device layer.
 *
 * No I/O callbacks can occur while we hold the buffer locked.
 */
int
hammer_io_read(struct vnode *devvp, struct hammer_io *io, int limit)
{
        struct buf *bp;
        int   error;

        if ((bp = io->bp) == NULL) {
                atomic_add_long(&hammer_count_io_running_read, io->bytes);
                if (hammer_cluster_enable && limit > io->bytes) {
                        error = cluster_read(devvp, io->offset + limit,
                                             io->offset, io->bytes,
                                             HAMMER_CLUSTER_SIZE,
                                             HAMMER_CLUSTER_SIZE,
                                             &io->bp);
                } else {
                        error = bread(devvp, io->offset, io->bytes, &io->bp);
                }
                hammer_stats_disk_read += io->bytes;
                atomic_add_long(&hammer_count_io_running_read, -io->bytes);

                /*
                 * The code generally assumes b_ops/b_dep has been set-up,
                 * even if we error out here.
                 */
                bp = io->bp;
                if ((hammer_debug_io & 0x0001) && (bp->b_flags & B_IODEBUG)) {
                        const char *metatype;

                        switch(io->type) {
                        case HAMMER_STRUCTURE_VOLUME:
                                metatype = "volume";
                                break;
                        case HAMMER_STRUCTURE_META_BUFFER:
                                switch(HAMMER_ITOB(io)->zoneX_offset
                                        & HAMMER_OFF_ZONE_MASK) {
                                case HAMMER_ZONE_BTREE:
                                        metatype = "btree";
                                        break;
                                case HAMMER_ZONE_META:
                                        metatype = "meta";
                                        break;
                                case HAMMER_ZONE_FREEMAP:
                                        metatype = "freemap";
                                        break;
                                default:
                                        metatype = "meta?";
                                        break;
                                }
                                break;
                        case HAMMER_STRUCTURE_DATA_BUFFER:
                                metatype = "data";
                                break;
                        case HAMMER_STRUCTURE_UNDO_BUFFER:
                                metatype = "undo";
                                break;
                        default:
                                metatype = "unknown";
                                break;
                        }
                        hdkprintf("zone2_offset %016jx %s\n",
                                (intmax_t)bp->b_bio2.bio_offset,
                                metatype);
                }
                bp->b_flags &= ~B_IODEBUG;
                bp->b_ops = &hammer_bioops;

                hammer_buf_attach_io(bp, io); /* locked by the io lock */
                BUF_KERNPROC(bp);
                KKASSERT(io->modified == 0);
                KKASSERT(io->running == 0);
                KKASSERT(io->waiting == 0);
                io->released = 0;       /* we hold an active lock on bp */
        } else {
                error = 0;
        }
        return(error);
}

/*
 * Similar to hammer_io_read() but returns a zero'd out buffer instead.
 * Must be called with the IO exclusively locked.
 *
 * vfs_bio_clrbuf() is kinda nasty, enforce serialization against background
 * I/O by forcing the buffer to not be in a released state before calling
 * it.
 *
 * This function will also mark the IO as modified but it will not
 * increment the modify_refs count.
 *
 * No I/O callbacks can occur while we hold the buffer locked.
 */
int
hammer_io_new(struct vnode *devvp, struct hammer_io *io)
{
        struct buf *bp;

        if ((bp = io->bp) == NULL) {
                io->bp = getblk(devvp, io->offset, io->bytes, 0, 0);
                bp = io->bp;
                bp->b_ops = &hammer_bioops;

                hammer_buf_attach_io(bp, io); /* locked by the io lock */
                io->released = 0;
                KKASSERT(io->running == 0);
                io->waiting = 0;
                BUF_KERNPROC(bp);
        } else {
                if (io->released) {
                        regetblk(bp);
                        BUF_KERNPROC(bp);
                        io->released = 0;
                }
        }
        hammer_io_modify(io, 0);
        vfs_bio_clrbuf(bp);
        return(0);
}

/*
 * Advance the activity count on the underlying buffer because
 * HAMMER does not getblk/brelse on every access.
 *
 * The io->bp cannot go away while the buffer is referenced.
 */
void
hammer_io_advance(struct hammer_io *io)
{
        if (io->bp)
                buf_act_advance(io->bp);
}

/*
 * Remove potential device level aliases against buffers managed by high level
 * vnodes.  Aliases can also be created due to mixed buffer sizes or via
 * direct access to the backing store device.
 *
 * This is nasty because the buffers are also VMIO-backed.  Even if a buffer
 * does not exist its backing VM pages might, and we have to invalidate
 * those as well or a getblk() will reinstate them.
 *
 * Buffer cache buffers associated with hammer_buffers cannot be
 * invalidated.
 */
int
hammer_io_inval(hammer_volume_t volume, hammer_off_t zone2_offset)
{
        hammer_io_t io;
        hammer_mount_t hmp;
        hammer_off_t phys_offset;
        struct buf *bp;
        int error;

        hmp = volume->io.hmp;
        lwkt_gettoken(&hmp->io_token);

        /*
         * If a device buffer already exists for the specified physical
         * offset use that, otherwise instantiate a buffer to cover any
         * related VM pages, set BNOCACHE, and brelse().
         */
        phys_offset = hammer_xlate_to_phys(volume->ondisk, zone2_offset);
        if ((bp = findblk(volume->devvp, phys_offset, 0)) != NULL)
                bremfree(bp);
        else
                bp = getblk(volume->devvp, phys_offset, HAMMER_BUFSIZE, 0, 0);

        if ((io = hammer_buf_peek_io(bp)) != NULL) {
#if 0
                hammer_ref(&io->lock);
                hammer_io_clear_modify(io, 1);
                bundirty(bp);
                io->released = 0;
                BUF_KERNPROC(bp);
                io->reclaim = 1;
                io->waitdep = 1;        /* XXX this is a fs_token field */
                KKASSERT(hammer_isactive(&io->lock) == 1);
                hammer_rel_buffer(HAMMER_ITOB(io), 0);
                /*hammer_io_deallocate(bp);*/
#endif
                bqrelse(bp);
                error = EAGAIN;
        } else {
                KKASSERT((bp->b_flags & B_LOCKED) == 0);
                bundirty(bp);
                bp->b_flags |= B_NOCACHE|B_RELBUF;
                brelse(bp);
                error = 0;
        }
        lwkt_reltoken(&hmp->io_token);
        return(error);
}

/*
 * This routine is called on the last reference to a hammer structure.
 * The io must be interlocked with a refcount of zero.  The hammer structure
 * will remain interlocked on return.
 *
 * This routine may return a non-NULL bp to the caller for dispoal.
 * The caller typically brelse()'s the bp.
 *
 * The bp may or may not still be passively associated with the IO.  It
 * will remain passively associated if it is unreleasable (e.g. a modified
 * meta-data buffer).
 *
 * The only requirement here is that modified meta-data and volume-header
 * buffer may NOT be disassociated from the IO structure, and consequently
 * we also leave such buffers actively associated with the IO if they already
 * are (since the kernel can't do anything with them anyway).  Only the
 * flusher is allowed to write such buffers out.  Modified pure-data and
 * undo buffers are returned to the kernel but left passively associated
 * so we can track when the kernel writes the bp out.
 */
struct buf *
hammer_io_release(struct hammer_io *io, int flush)
{
        struct buf *bp;

        if ((bp = io->bp) == NULL)
                return(NULL);

        /*
         * Try to flush a dirty IO to disk if asked to by the
         * caller or if the kernel tried to flush the buffer in the past.
         *
         * Kernel-initiated flushes are only allowed for pure-data buffers.
         * meta-data and volume buffers can only be flushed explicitly
         * by HAMMER.
         */
        if (io->modified) {
                if (flush) {
                        hammer_io_flush(io, 0);
                } else if (bp->b_flags & B_LOCKED) {
                        switch(io->type) {
                        case HAMMER_STRUCTURE_DATA_BUFFER:
                                hammer_io_flush(io, 0);
                                break;
                        case HAMMER_STRUCTURE_UNDO_BUFFER:
                                hammer_io_flush(io, hammer_undo_reclaim(io));
                                break;
                        default:
                                break;
                        }
                } /* else no explicit request to flush the buffer */
        }

        /*
         * Wait for the IO to complete if asked to.  This occurs when
         * the buffer must be disposed of definitively during an umount
         * or buffer invalidation.
         */
        if (io->waitdep && io->running) {
                hammer_io_wait(io);
        }

        /*
         * Return control of the buffer to the kernel (with the provisio
         * that our bioops can override kernel decisions with regards to
         * the buffer).
         */
        if ((flush || io->reclaim) && io->modified == 0 && io->running == 0) {
                /*
                 * Always disassociate the bp if an explicit flush
                 * was requested and the IO completed with no error
                 * (so unmount can really clean up the structure).
                 */
                if (io->released) {
                        regetblk(bp);
                        BUF_KERNPROC(bp);
                } else {
                        io->released = 1;
                }
                hammer_io_disassociate(io);
                /* return the bp */
        } else if (io->modified) {
                /*
                 * Only certain IO types can be released to the kernel if
                 * the buffer has been modified.
                 *
                 * volume and meta-data IO types may only be explicitly
                 * flushed by HAMMER.
                 */
                switch(io->type) {
                case HAMMER_STRUCTURE_DATA_BUFFER:
                case HAMMER_STRUCTURE_UNDO_BUFFER:
                        if (io->released == 0) {
                                io->released = 1;
                                bp->b_flags |= B_CLUSTEROK;
                                bdwrite(bp);
                        }
                        break;
                default:
                        break;
                }
                bp = NULL;      /* bp left associated */
        } else if (io->released == 0) {
                /*
                 * Clean buffers can be generally released to the kernel.
                 * We leave the bp passively associated with the HAMMER
                 * structure and use bioops to disconnect it later on
                 * if the kernel wants to discard the buffer.
                 *
                 * We can steal the structure's ownership of the bp.
                 */
                io->released = 1;
                if (bp->b_flags & B_LOCKED) {
                        hammer_io_disassociate(io);
                        /* return the bp */
                } else {
                        if (io->reclaim) {
                                hammer_io_disassociate(io);
                                /* return the bp */
                        } else {
                                /* return the bp (bp passively associated) */
                        }
                }
        } else {
                /*
                 * A released buffer is passively associate with our
                 * hammer_io structure.  The kernel cannot destroy it
                 * without making a bioops call.  If the kernel (B_LOCKED)
                 * or we (reclaim) requested that the buffer be destroyed
                 * we destroy it, otherwise we do a quick get/release to
                 * reset its position in the kernel's LRU list.
                 *
                 * Leaving the buffer passively associated allows us to
                 * use the kernel's LRU buffer flushing mechanisms rather
                 * then rolling our own.
                 *
                 * XXX there are two ways of doing this.  We can re-acquire
                 * and passively release to reset the LRU, or not.
                 */
                if (io->running == 0) {
                        regetblk(bp);
                        if ((bp->b_flags & B_LOCKED) || io->reclaim) {
                                hammer_io_disassociate(io);
                                /* return the bp */
                        } else {
                                /* return the bp (bp passively associated) */
                        }
                } else {
                        /*
                         * bp is left passively associated but we do not
                         * try to reacquire it.  Interactions with the io
                         * structure will occur on completion of the bp's
                         * I/O.
                         */
                        bp = NULL;
                }
        }
        return(bp);
}

/*
 * This routine is called with a locked IO when a flush is desired and
 * no other references to the structure exists other then ours.  This
 * routine is ONLY called when HAMMER believes it is safe to flush a
 * potentially modified buffer out.
 *
 * The locked io or io reference prevents a flush from being initiated
 * by the kernel.
 */
void
hammer_io_flush(struct hammer_io *io, int reclaim)
{
        struct buf *bp;
        hammer_mount_t hmp;

        /*
         * Degenerate case - nothing to flush if nothing is dirty.
         */
        if (io->modified == 0)
                return;

        KKASSERT(io->bp);
        KKASSERT(io->modify_refs <= 0);

        /*
         * Acquire ownership of the bp, particularly before we clear our
         * modified flag.
         *
         * We are going to bawrite() this bp.  Don't leave a window where
         * io->released is set, we actually own the bp rather then our
         * buffer.
         *
         * The io_token should not be required here as only
         */
        hmp = io->hmp;
        bp = io->bp;
        if (io->released) {
                regetblk(bp);
                /* BUF_KERNPROC(io->bp); */
                /* io->released = 0; */
                KKASSERT(io->released);
                KKASSERT(io->bp == bp);
        } else {
                io->released = 1;
        }

        if (reclaim) {
                io->reclaim = 1;
                if ((bp->b_flags & B_LOCKED) == 0) {
                        bp->b_flags |= B_LOCKED;
                        atomic_add_int(&hammer_count_io_locked, 1);
                }
        }

        /*
         * Acquire exclusive access to the bp and then clear the modified
         * state of the buffer prior to issuing I/O to interlock any
         * modifications made while the I/O is in progress.  This shouldn't
         * happen anyway but losing data would be worse.  The modified bit
         * will be rechecked after the IO completes.
         *
         * NOTE: This call also finalizes the buffer's content (inval == 0).
         *
         * This is only legal when lock.refs == 1 (otherwise we might clear
         * the modified bit while there are still users of the cluster
         * modifying the data).
         *
         * Do this before potentially blocking so any attempt to modify the
         * ondisk while we are blocked blocks waiting for us.
         */
        hammer_ref(&io->lock);
        hammer_io_clear_modify(io, 0);
        hammer_rel(&io->lock);

        if (hammer_debug_io & 0x0002)
                hdkprintf("%016jx\n", bp->b_bio1.bio_offset);

        /*
         * Transfer ownership to the kernel and initiate I/O.
         *
         * NOTE: We do not hold io_token so an atomic op is required to
         *       update io_running_space.
         */
        io->running = 1;
        atomic_add_long(&hmp->io_running_space, io->bytes);
        atomic_add_long(&hammer_count_io_running_write, io->bytes);
        lwkt_gettoken(&hmp->io_token);
        TAILQ_INSERT_TAIL(&hmp->iorun_list, io, iorun_entry);
        lwkt_reltoken(&hmp->io_token);
        cluster_awrite(bp);
        hammer_io_flush_mark(io->volume);
}

/************************************************************************
 *                              BUFFER DIRTYING                         *
 ************************************************************************
 *
 * These routines deal with dependancies created when IO buffers get
 * modified.  The caller must call hammer_modify_*() on a referenced
 * HAMMER structure prior to modifying its on-disk data.
 *
 * Any intent to modify an IO buffer acquires the related bp and imposes
 * various write ordering dependancies.
 */

/*
 * Mark a HAMMER structure as undergoing modification.  Meta-data buffers
 * are locked until the flusher can deal with them, pure data buffers
 * can be written out.
 *
 * The referenced io prevents races.
 */
static
void
hammer_io_modify(hammer_io_t io, int count)
{
        /*
         * io->modify_refs must be >= 0
         */
        while (io->modify_refs < 0) {
                io->waitmod = 1;
                tsleep(io, 0, "hmrmod", 0);
        }

        /*
         * Shortcut if nothing to do.
         */
        KKASSERT(hammer_isactive(&io->lock) && io->bp != NULL);
        io->modify_refs += count;
        if (io->modified && io->released == 0)
                return;

        /*
         * NOTE: It is important not to set the modified bit
         *       until after we have acquired the bp or we risk
         *       racing against checkwrite.
         */
        hammer_lock_ex(&io->lock);
        if (io->released) {
                regetblk(io->bp);
                BUF_KERNPROC(io->bp);
                io->released = 0;
        }
        if (io->modified == 0) {
                hammer_io_set_modlist(io);
                io->modified = 1;
        }
        hammer_unlock(&io->lock);
}

static __inline
void
hammer_io_modify_done(hammer_io_t io)
{
        KKASSERT(io->modify_refs > 0);
        --io->modify_refs;
        if (io->modify_refs == 0 && io->waitmod) {
                io->waitmod = 0;
                wakeup(io);
        }
}

/*
 * The write interlock blocks other threads trying to modify a buffer
 * (they block in hammer_io_modify()) after us, or blocks us while other
 * threads are in the middle of modifying a buffer.
 *
 * The caller also has a ref on the io, however if we are not careful
 * we will race bioops callbacks (checkwrite).  To deal with this
 * we must at least acquire and release the io_token, and it is probably
 * better to hold it through the setting of modify_refs.
 */
void
hammer_io_write_interlock(hammer_io_t io)
{
        hammer_mount_t hmp = io->hmp;

        lwkt_gettoken(&hmp->io_token);
        while (io->modify_refs != 0) {
                io->waitmod = 1;
                tsleep(io, 0, "hmrmod", 0);
        }
        io->modify_refs = -1;
        lwkt_reltoken(&hmp->io_token);
}

void
hammer_io_done_interlock(hammer_io_t io)
{
        KKASSERT(io->modify_refs == -1);
        io->modify_refs = 0;
        if (io->waitmod) {
                io->waitmod = 0;
                wakeup(io);
        }
}

/*
 * Caller intends to modify a volume's ondisk structure.
 *
 * This is only allowed if we are the flusher or we have a ref on the
 * sync_lock.
 */
void
hammer_modify_volume(hammer_transaction_t trans, hammer_volume_t volume,
                     void *base, int len)
{
        KKASSERT (trans == NULL || trans->sync_lock_refs > 0);

        hammer_io_modify(&volume->io, 1);
        if (len) {
                intptr_t rel_offset = (intptr_t)base - (intptr_t)volume->ondisk;
                KKASSERT((rel_offset & ~(intptr_t)HAMMER_BUFMASK) == 0);
                hammer_generate_undo(trans,
                         HAMMER_ENCODE_RAW_VOLUME(volume->vol_no, rel_offset),
                         base, len);
        }
}

/*
 * Caller intends to modify a buffer's ondisk structure.
 *
 * This is only allowed if we are the flusher or we have a ref on the
 * sync_lock.
 */
void
hammer_modify_buffer(hammer_transaction_t trans, hammer_buffer_t buffer,
                     void *base, int len)
{
        KKASSERT (trans == NULL || trans->sync_lock_refs > 0);

        hammer_io_modify(&buffer->io, 1);
        if (len) {
                intptr_t rel_offset = (intptr_t)base - (intptr_t)buffer->ondisk;
                KKASSERT((rel_offset & ~(intptr_t)HAMMER_BUFMASK) == 0);
                hammer_generate_undo(trans,
                                     buffer->zone2_offset + rel_offset,
                                     base, len);
        }
}

void
hammer_modify_volume_done(hammer_volume_t volume)
{
        hammer_io_modify_done(&volume->io);
}

void
hammer_modify_buffer_done(hammer_buffer_t buffer)
{
        hammer_io_modify_done(&buffer->io);
}

/*
 * Mark an entity as not being dirty any more and finalize any
 * delayed adjustments to the buffer.
 *
 * Delayed adjustments are an important performance enhancement, allowing
 * us to avoid recalculating B-Tree node CRCs over and over again when
 * making bulk-modifications to the B-Tree.
 *
 * If inval is non-zero delayed adjustments are ignored.
 *
 * This routine may dereference related btree nodes and cause the
 * buffer to be dereferenced.  The caller must own a reference on io.
 */
void
hammer_io_clear_modify(struct hammer_io *io, int inval)
{
        hammer_mount_t hmp;

        /*
         * io_token is needed to avoid races on mod_root
         */
        if (io->modified == 0)
                return;
        hmp = io->hmp;
        lwkt_gettoken(&hmp->io_token);
        if (io->modified == 0) {
                lwkt_reltoken(&hmp->io_token);
                return;
        }

        /*
         * Take us off the mod-list and clear the modified bit.
         */
        KKASSERT(io->mod_root != NULL);
        if (io->mod_root == &io->hmp->volu_root ||
            io->mod_root == &io->hmp->meta_root) {
                io->hmp->locked_dirty_space -= io->bytes;
                atomic_add_long(&hammer_count_dirtybufspace, -io->bytes);
        }
        RB_REMOVE(hammer_mod_rb_tree, io->mod_root, io);
        io->mod_root = NULL;
        io->modified = 0;

        lwkt_reltoken(&hmp->io_token);

        /*
         * If this bit is not set there are no delayed adjustments.
         */
        if (io->gencrc == 0)
                return;
        io->gencrc = 0;

        /*
         * Finalize requested CRCs.  The NEEDSCRC flag also holds a reference
         * on the node (& underlying buffer).  Release the node after clearing
         * the flag.
         */
        if (io->type == HAMMER_STRUCTURE_META_BUFFER) {
                hammer_buffer_t buffer = HAMMER_ITOB(io);
                hammer_node_t node;

restart:
                TAILQ_FOREACH(node, &buffer->clist, entry) {
                        if ((node->flags & HAMMER_NODE_NEEDSCRC) == 0)
                                continue;
                        node->flags &= ~HAMMER_NODE_NEEDSCRC;
                        KKASSERT(node->ondisk);
                        if (inval == 0)
                                node->ondisk->crc = crc32(&node->ondisk->crc + 1, HAMMER_BTREE_CRCSIZE);
                        hammer_rel_node(node);
                        goto restart;
                }
        }
        /* caller must still have ref on io */
        KKASSERT(hammer_isactive(&io->lock));
}

/*
 * Clear the IO's modify list.  Even though the IO is no longer modified
 * it may still be on the lose_root.  This routine is called just before
 * the governing hammer_buffer is destroyed.
 *
 * mod_root requires io_token protection.
 */
void
hammer_io_clear_modlist(struct hammer_io *io)
{
        hammer_mount_t hmp = io->hmp;

        KKASSERT(io->modified == 0);
        if (io->mod_root) {
                lwkt_gettoken(&hmp->io_token);
                if (io->mod_root) {
                        KKASSERT(io->mod_root == &io->hmp->lose_root);
                        RB_REMOVE(hammer_mod_rb_tree, io->mod_root, io);
                        io->mod_root = NULL;
                }
                lwkt_reltoken(&hmp->io_token);
        }
}

static void
hammer_io_set_modlist(struct hammer_io *io)
{
        struct hammer_mount *hmp = io->hmp;

        lwkt_gettoken(&hmp->io_token);
        KKASSERT(io->mod_root == NULL);

        switch(io->type) {
        case HAMMER_STRUCTURE_VOLUME:
                io->mod_root = &hmp->volu_root;
                hmp->locked_dirty_space += io->bytes;
                atomic_add_long(&hammer_count_dirtybufspace, io->bytes);
                break;
        case HAMMER_STRUCTURE_META_BUFFER:
                io->mod_root = &hmp->meta_root;
                hmp->locked_dirty_space += io->bytes;
                atomic_add_long(&hammer_count_dirtybufspace, io->bytes);
                break;
        case HAMMER_STRUCTURE_UNDO_BUFFER:
                io->mod_root = &hmp->undo_root;
                break;
        case HAMMER_STRUCTURE_DATA_BUFFER:
                io->mod_root = &hmp->data_root;
                break;
        case HAMMER_STRUCTURE_DUMMY:
                hpanic("bad io type");
                break; /* NOT REACHED */
        }
        if (RB_INSERT(hammer_mod_rb_tree, io->mod_root, io)) {
                hpanic("duplicate entry @ %d:%015jx",
                        io->volume->vol_no, io->offset);
                /* NOT REACHED */
        }
        lwkt_reltoken(&hmp->io_token);
}

/************************************************************************
 *                              HAMMER_BIOOPS                           *
 ************************************************************************
 *
 */

/*
 * Pre-IO initiation kernel callback - cluster build only
 *
 * bioops callback - hold io_token
 */
static void
hammer_io_start(struct buf *bp)
{
        /* nothing to do, so io_token not needed */
}

/*
 * Post-IO completion kernel callback - MAY BE CALLED FROM INTERRUPT!
 *
 * NOTE: HAMMER may modify a data buffer after we have initiated write
 *       I/O.
 *
 * NOTE: MPSAFE callback
 *
 * bioops callback - hold io_token
 */
static void
hammer_io_complete(struct buf *bp)
{
        hammer_io_t io = hammer_buf_peek_io(bp);
        struct hammer_mount *hmp = io->hmp;
        struct hammer_io *ionext;

        lwkt_gettoken(&hmp->io_token);

        KKASSERT(io->released == 1);

        /*
         * Deal with people waiting for I/O to drain
         */
        if (io->running) {
                /*
                 * Deal with critical write errors.  Once a critical error
                 * has been flagged in hmp the UNDO FIFO will not be updated.
                 * That way crash recover will give us a consistent
                 * filesystem.
                 *
                 * Because of this we can throw away failed UNDO buffers.  If
                 * we throw away META or DATA buffers we risk corrupting
                 * the now read-only version of the filesystem visible to
                 * the user.  Clear B_ERROR so the buffer is not re-dirtied
                 * by the kernel and ref the io so it doesn't get thrown
                 * away.
                 */
                if (bp->b_flags & B_ERROR) {
                        lwkt_gettoken(&hmp->fs_token);
                        hammer_critical_error(hmp, NULL, bp->b_error,
                                              "while flushing meta-data");
                        lwkt_reltoken(&hmp->fs_token);

                        switch(io->type) {
                        case HAMMER_STRUCTURE_UNDO_BUFFER:
                                break;
                        default:
                                if (io->ioerror == 0) {
                                        io->ioerror = 1;
                                        hammer_ref(&io->lock);
                                }
                                break;
                        }
                        bp->b_flags &= ~B_ERROR;
                        bundirty(bp);
#if 0
                        hammer_io_set_modlist(io);
                        io->modified = 1;
#endif
                }
                hammer_stats_disk_write += io->bytes;
                atomic_add_long(&hammer_count_io_running_write, -io->bytes);
                atomic_add_long(&hmp->io_running_space, -io->bytes);
                KKASSERT(hmp->io_running_space >= 0);
                io->running = 0;

                /*
                 * Remove from iorun list and wakeup any multi-io waiter(s).
                 */
                if (TAILQ_FIRST(&hmp->iorun_list) == io) {
                        ionext = TAILQ_NEXT(io, iorun_entry);
                        if (ionext && ionext->type == HAMMER_STRUCTURE_DUMMY)
                                wakeup(ionext);
                }
                TAILQ_REMOVE(&hmp->iorun_list, io, iorun_entry);
        } else {
                hammer_stats_disk_read += io->bytes;
        }

        if (io->waiting) {
                io->waiting = 0;
                wakeup(io);
        }

        /*
         * If B_LOCKED is set someone wanted to deallocate the bp at some
         * point, try to do it now.  The operation will fail if there are
         * refs or if hammer_io_deallocate() is unable to gain the
         * interlock.
         */
        if (bp->b_flags & B_LOCKED) {
                atomic_add_int(&hammer_count_io_locked, -1);
                bp->b_flags &= ~B_LOCKED;
                hammer_io_deallocate(bp);
                /* structure may be dead now */
        }
        lwkt_reltoken(&hmp->io_token);
}

/*
 * Callback from kernel when it wishes to deallocate a passively
 * associated structure.  This mostly occurs with clean buffers
 * but it may be possible for a holding structure to be marked dirty
 * while its buffer is passively associated.  The caller owns the bp.
 *
 * If we cannot disassociate we set B_LOCKED to prevent the buffer
 * from getting reused.
 *
 * WARNING: Because this can be called directly by getnewbuf we cannot
 * recurse into the tree.  If a bp cannot be immediately disassociated
 * our only recourse is to set B_LOCKED.
 *
 * WARNING: This may be called from an interrupt via hammer_io_complete()
 *
 * bioops callback - hold io_token
 */
static void
hammer_io_deallocate(struct buf *bp)
{
        hammer_io_t io = hammer_buf_peek_io(bp);
        hammer_mount_t hmp;

        hmp = io->hmp;

        lwkt_gettoken(&hmp->io_token);

        KKASSERT((bp->b_flags & B_LOCKED) == 0 && io->running == 0);
        if (hammer_try_interlock_norefs(&io->lock) == 0) {
                /*
                 * We cannot safely disassociate a bp from a referenced
                 * or interlocked HAMMER structure.
                 */
                bp->b_flags |= B_LOCKED;
                atomic_add_int(&hammer_count_io_locked, 1);
        } else if (io->modified) {
                /*
                 * It is not legal to disassociate a modified buffer.  This
                 * case really shouldn't ever occur.
                 */
                bp->b_flags |= B_LOCKED;
                atomic_add_int(&hammer_count_io_locked, 1);
                hammer_put_interlock(&io->lock, 0);
        } else {
                /*
                 * Disassociate the BP.  If the io has no refs left we
                 * have to add it to the loose list.  The kernel has
                 * locked the buffer and therefore our io must be
                 * in a released state.
                 */
                hammer_io_disassociate(io);
                if (io->type != HAMMER_STRUCTURE_VOLUME) {
                        KKASSERT(io->bp == NULL);
                        KKASSERT(io->mod_root == NULL);
                        io->mod_root = &hmp->lose_root;
                        if (RB_INSERT(hammer_mod_rb_tree, io->mod_root, io)) {
                                hpanic("duplicate entry @ %d:%015jx",
                                        io->volume->vol_no, io->offset);
                                /* NOT REACHED */
                        }
                }
                hammer_put_interlock(&io->lock, 1);
        }
        lwkt_reltoken(&hmp->io_token);
}

/*
 * bioops callback - hold io_token
 */
static int
hammer_io_fsync(struct vnode *vp)
{
        /* nothing to do, so io_token not needed */
        return(0);
}

/*
 * NOTE: will not be called unless we tell the kernel about the
 * bioops.  Unused... we use the mount's VFS_SYNC instead.
 *
 * bioops callback - hold io_token
 */
static int
hammer_io_sync(struct mount *mp)
{
        /* nothing to do, so io_token not needed */
        return(0);
}

/*
 * bioops callback - hold io_token
 */
static void
hammer_io_movedeps(struct buf *bp1, struct buf *bp2)
{
        /* nothing to do, so io_token not needed */
}

/*
 * I/O pre-check for reading and writing.  HAMMER only uses this for
 * B_CACHE buffers so checkread just shouldn't happen, but if it does
 * allow it.
 *
 * Writing is a different case.  We don't want the kernel to try to write
 * out a buffer that HAMMER may be modifying passively or which has a
 * dependancy.  In addition, kernel-demanded writes can only proceed for
 * certain types of buffers (i.e. UNDO and DATA types).  Other dirty
 * buffer types can only be explicitly written by the flusher.
 *
 * checkwrite will only be called for bdwrite()n buffers.  If we return
 * success the kernel is guaranteed to initiate the buffer write.
 *
 * bioops callback - hold io_token
 */
static int
hammer_io_checkread(struct buf *bp)
{
        /* nothing to do, so io_token not needed */
        return(0);
}

/*
 * The kernel is asking us whether it can write out a dirty buffer or not.
 *
 * bioops callback - hold io_token
 */
static int
hammer_io_checkwrite(struct buf *bp)
{
        hammer_io_t io = hammer_buf_peek_io(bp);
        hammer_mount_t hmp = io->hmp;

        /*
         * This shouldn't happen under normal operation.
         */
        lwkt_gettoken(&hmp->io_token);
        if (io->type == HAMMER_STRUCTURE_VOLUME ||
            io->type == HAMMER_STRUCTURE_META_BUFFER) {
                if (!panicstr)
                        hpanic("illegal buffer");
                if ((bp->b_flags & B_LOCKED) == 0) {
                        bp->b_flags |= B_LOCKED;
                        atomic_add_int(&hammer_count_io_locked, 1);
                }
                lwkt_reltoken(&hmp->io_token);
                return(1);
        }

        /*
         * We have to be able to interlock the IO to safely modify any
         * of its fields without holding the fs_token.  If we can't lock
         * it then we are racing someone.
         *
         * Our ownership of the bp lock prevents the io from being ripped
         * out from under us.
         */
        if (hammer_try_interlock_norefs(&io->lock) == 0) {
                bp->b_flags |= B_LOCKED;
                atomic_add_int(&hammer_count_io_locked, 1);
                lwkt_reltoken(&hmp->io_token);
                return(1);
        }

        /*
         * The modified bit must be cleared prior to the initiation of
         * any IO (returning 0 initiates the IO).  Because this is a
         * normal data buffer hammer_io_clear_modify() runs through a
         * simple degenerate case.
         *
         * Return 0 will cause the kernel to initiate the IO, and we
         * must normally clear the modified bit before we begin.  If
         * the io has modify_refs we do not clear the modified bit,
         * otherwise we may miss changes.
         *
         * Only data and undo buffers can reach here.  These buffers do
         * not have terminal crc functions but we temporarily reference
         * the IO anyway, just in case.
         */
        if (io->modify_refs == 0 && io->modified) {
                hammer_ref(&io->lock);
                hammer_io_clear_modify(io, 0);
                hammer_rel(&io->lock);
        } else if (io->modified) {
                KKASSERT(io->type == HAMMER_STRUCTURE_DATA_BUFFER);
        }

        /*
         * The kernel is going to start the IO, set io->running.
         */
        KKASSERT(io->running == 0);
        io->running = 1;
        atomic_add_long(&io->hmp->io_running_space, io->bytes);
        atomic_add_long(&hammer_count_io_running_write, io->bytes);
        TAILQ_INSERT_TAIL(&io->hmp->iorun_list, io, iorun_entry);

        hammer_put_interlock(&io->lock, 1);
        lwkt_reltoken(&hmp->io_token);

        return(0);
}

/*
 * Return non-zero if we wish to delay the kernel's attempt to flush
 * this buffer to disk.
 *
 * bioops callback - hold io_token
 */
static int
hammer_io_countdeps(struct buf *bp, int n)
{
        /* nothing to do, so io_token not needed */
        return(0);
}

static struct bio_ops hammer_bioops = {
        .io_start       = hammer_io_start,
        .io_complete    = hammer_io_complete,
        .io_deallocate  = hammer_io_deallocate,
        .io_fsync       = hammer_io_fsync,
        .io_sync        = hammer_io_sync,
        .io_movedeps    = hammer_io_movedeps,
        .io_countdeps   = hammer_io_countdeps,
        .io_checkread   = hammer_io_checkread,
        .io_checkwrite  = hammer_io_checkwrite,
};

/************************************************************************
 *                              DIRECT IO OPS                           *
 ************************************************************************
 *
 * These functions operate directly on the buffer cache buffer associated
 * with a front-end vnode rather then a back-end device vnode.
 */

/*
 * Read a buffer associated with a front-end vnode directly from the
 * disk media.  The bio may be issued asynchronously.  If leaf is non-NULL
 * we validate the CRC.
 *
 * We must check for the presence of a HAMMER buffer to handle the case
 * where the reblocker has rewritten the data (which it does via the HAMMER
 * buffer system, not via the high-level vnode buffer cache), but not yet
 * committed the buffer to the media.
 */
int
hammer_io_direct_read(hammer_mount_t hmp, struct bio *bio,
                      hammer_btree_leaf_elm_t leaf)
{
        hammer_off_t buf_offset;
        hammer_off_t zone2_offset;
        hammer_volume_t volume;
        struct buf *bp;
        struct bio *nbio;
        int vol_no;
        int error;

        buf_offset = bio->bio_offset;
        KKASSERT((buf_offset & HAMMER_OFF_ZONE_MASK) ==
                 HAMMER_ZONE_LARGE_DATA);

        /*
         * The buffer cache may have an aliased buffer (the reblocker can
         * write them).  If it does we have to sync any dirty data before
         * we can build our direct-read.  This is a non-critical code path.
         */
        bp = bio->bio_buf;
        hammer_sync_buffers(hmp, buf_offset, bp->b_bufsize);

        /*
         * Resolve to a zone-2 offset.  The conversion just requires
         * munging the top 4 bits but we want to abstract it anyway
         * so the blockmap code can verify the zone assignment.
         */
        zone2_offset = hammer_blockmap_lookup(hmp, buf_offset, &error);
        if (error)
                goto done;
        KKASSERT((zone2_offset & HAMMER_OFF_ZONE_MASK) ==
                 HAMMER_ZONE_RAW_BUFFER);

        /*
         * Resolve volume and raw-offset for 3rd level bio.  The
         * offset will be specific to the volume.
         */
        vol_no = HAMMER_VOL_DECODE(zone2_offset);
        volume = hammer_get_volume(hmp, vol_no, &error);
        if (error == 0 && zone2_offset >= volume->maxbuf_off)
                error = EIO;

        if (error == 0) {
                /*
                 * 3rd level bio (the caller has already pushed once)
                 */
                nbio = push_bio(bio);
                nbio->bio_offset = hammer_xlate_to_phys(volume->ondisk,
                                                        zone2_offset);
                hammer_stats_disk_read += bp->b_bufsize;
                vn_strategy(volume->devvp, nbio);
        }
        hammer_rel_volume(volume, 0);
done:
        if (error) {
                hdkprintf("failed @ %016llx\n", (long long)zone2_offset);
                bp->b_error = error;
                bp->b_flags |= B_ERROR;
                biodone(bio);
        }
        return(error);
}

/*
 * This works similarly to hammer_io_direct_read() except instead of
 * directly reading from the device into the bio we instead indirectly
 * read through the device's buffer cache and then copy the data into
 * the bio.
 *
 * If leaf is non-NULL and validation is enabled, the CRC will be checked.
 *
 * This routine also executes asynchronously.  It allows hammer strategy
 * calls to operate asynchronously when in double_buffer mode (in addition
 * to operating asynchronously when in normal mode).
 */
int
hammer_io_indirect_read(hammer_mount_t hmp, struct bio *bio,
                        hammer_btree_leaf_elm_t leaf)
{
        hammer_off_t buf_offset;
        hammer_off_t zone2_offset;
        hammer_volume_t volume;
        struct buf *bp;
        int vol_no;
        int error;

        buf_offset = bio->bio_offset;
        KKASSERT((buf_offset & HAMMER_OFF_ZONE_MASK) ==
                 HAMMER_ZONE_LARGE_DATA);

        /*
         * The buffer cache may have an aliased buffer (the reblocker can
         * write them).  If it does we have to sync any dirty data before
         * we can build our direct-read.  This is a non-critical code path.
         */
        bp = bio->bio_buf;
        hammer_sync_buffers(hmp, buf_offset, bp->b_bufsize);

        /*
         * Resolve to a zone-2 offset.  The conversion just requires
         * munging the top 4 bits but we want to abstract it anyway
         * so the blockmap code can verify the zone assignment.
         */
        zone2_offset = hammer_blockmap_lookup(hmp, buf_offset, &error);
        if (error)
                goto done;
        KKASSERT((zone2_offset & HAMMER_OFF_ZONE_MASK) ==
                 HAMMER_ZONE_RAW_BUFFER);

        /*
         * Resolve volume and raw-offset for 3rd level bio.  The
         * offset will be specific to the volume.
         */
        vol_no = HAMMER_VOL_DECODE(zone2_offset);
        volume = hammer_get_volume(hmp, vol_no, &error);
        if (error == 0 && zone2_offset >= volume->maxbuf_off)
                error = EIO;

        if (error == 0) {
                /*
                 * Convert to the raw volume->devvp offset and acquire
                 * the buf, issuing async I/O if necessary.
                 */
                buf_offset = hammer_xlate_to_phys(volume->ondisk, zone2_offset);

                if (leaf && hammer_verify_data) {
                        bio->bio_caller_info1.uvalue32 = leaf->data_crc;
                        bio->bio_caller_info2.index = 1;
                } else {
                        bio->bio_caller_info2.index = 0;
                }
                breadcb(volume->devvp, buf_offset, bp->b_bufsize,
                        hammer_indirect_callback, bio);
        }
        hammer_rel_volume(volume, 0);
done:
        if (error) {
                hdkprintf("failed @ %016llx\n", (long long)zone2_offset);
                bp->b_error = error;
                bp->b_flags |= B_ERROR;
                biodone(bio);
        }
        return(error);
}

/*
 * Indirect callback on completion.  bio/bp specify the device-backed
 * buffer.  bio->bio_caller_info1.ptr holds obio.
 *
 * obio/obp is the original regular file buffer.  obio->bio_caller_info*
 * contains the crc specification.
 *
 * We are responsible for calling bpdone() and bqrelse() on bio/bp, and
 * for calling biodone() on obio.
 */
static void
hammer_indirect_callback(struct bio *bio)
{
        struct buf *bp = bio->bio_buf;
        struct buf *obp;
        struct bio *obio;

        /*
         * If BIO_DONE is already set the device buffer was already
         * fully valid (B_CACHE).  If it is not set then I/O was issued
         * and we have to run I/O completion as the last bio.
         *
         * Nobody is waiting for our device I/O to complete, we are
         * responsible for bqrelse()ing it which means we also have to do
         * the equivalent of biowait() and clear BIO_DONE (which breadcb()
         * may have set).
         *
         * Any preexisting device buffer should match the requested size,
         * but due to big-block recycling and other factors there is some
         * fragility there, so we assert that the device buffer covers
         * the request.
         */
        if ((bio->bio_flags & BIO_DONE) == 0)
                bpdone(bp, 0);
        bio->bio_flags &= ~(BIO_DONE | BIO_SYNC);

        obio = bio->bio_caller_info1.ptr;
        obp = obio->bio_buf;

        if (bp->b_flags & B_ERROR) {
                obp->b_flags |= B_ERROR;
                obp->b_error = bp->b_error;
        } else if (obio->bio_caller_info2.index &&
                   obio->bio_caller_info1.uvalue32 !=
                    crc32(bp->b_data, bp->b_bufsize)) {
                obp->b_flags |= B_ERROR;
                obp->b_error = EIO;
        } else {
                KKASSERT(bp->b_bufsize >= obp->b_bufsize);
                bcopy(bp->b_data, obp->b_data, obp->b_bufsize);
                obp->b_resid = 0;
                obp->b_flags |= B_AGE;
        }
        biodone(obio);
        bqrelse(bp);
}

/*
 * Write a buffer associated with a front-end vnode directly to the
 * disk media.  The bio may be issued asynchronously.
 *
 * The BIO is associated with the specified record and RECG_DIRECT_IO
 * is set.  The recorded is added to its object.
 */
int
hammer_io_direct_write(hammer_mount_t hmp, struct bio *bio,
                       hammer_record_t record)
{
        hammer_btree_leaf_elm_t leaf = &record->leaf;
        hammer_off_t buf_offset;
        hammer_off_t zone2_offset;
        hammer_volume_t volume;
        hammer_buffer_t buffer;
        struct buf *bp;
        struct bio *nbio;
        char *ptr;
        int vol_no;
        int error;

        buf_offset = leaf->data_offset;

        KKASSERT(hammer_is_zone2_mapped_index(
                HAMMER_ZONE_DECODE(buf_offset)));
        KKASSERT(bio->bio_buf->b_cmd == BUF_CMD_WRITE);

        /*
         * Issue or execute the I/O.  The new memory record must replace
         * the old one before the I/O completes, otherwise a reaquisition of
         * the buffer will load the old media data instead of the new.
         */
        if ((buf_offset & HAMMER_BUFMASK) == 0 &&
            leaf->data_len >= HAMMER_BUFSIZE) {
                /*
                 * We are using the vnode's bio to write directly to the
                 * media, any hammer_buffer at the same zone-X offset will
                 * now have stale data.
                 */
                zone2_offset = hammer_blockmap_lookup(hmp, buf_offset, &error);
                vol_no = HAMMER_VOL_DECODE(zone2_offset);
                volume = hammer_get_volume(hmp, vol_no, &error);

                if (error == 0 && zone2_offset >= volume->maxbuf_off)
                        error = EIO;
                if (error == 0) {
                        bp = bio->bio_buf;
                        KKASSERT((bp->b_bufsize & HAMMER_BUFMASK) == 0);
                        /*
                        hammer_del_buffers(hmp, buf_offset,
                                           zone2_offset, bp->b_bufsize);
                        */

                        /*
                         * Second level bio - cached zone2 offset.
                         *
                         * (We can put our bio_done function in either the
                         *  2nd or 3rd level).
                         */
                        nbio = push_bio(bio);
                        nbio->bio_offset = zone2_offset;
                        nbio->bio_done = hammer_io_direct_write_complete;
                        nbio->bio_caller_info1.ptr = record;
                        record->zone2_offset = zone2_offset;
                        record->gflags |= HAMMER_RECG_DIRECT_IO |
                                         HAMMER_RECG_DIRECT_INVAL;

                        /*
                         * Third level bio - raw offset specific to the
                         * correct volume.
                         */
                        nbio = push_bio(nbio);
                        nbio->bio_offset = hammer_xlate_to_phys(volume->ondisk,
                                                                zone2_offset);
                        hammer_stats_disk_write += bp->b_bufsize;
                        hammer_ip_replace_bulk(hmp, record);
                        vn_strategy(volume->devvp, nbio);
                        hammer_io_flush_mark(volume);
                }
                hammer_rel_volume(volume, 0);
        } else {
                /*
                 * Must fit in a standard HAMMER buffer.  In this case all
                 * consumers use the HAMMER buffer system and RECG_DIRECT_IO
                 * does not need to be set-up.
                 */
                KKASSERT(((buf_offset ^ (buf_offset + leaf->data_len - 1)) & ~HAMMER_BUFMASK64) == 0);
                buffer = NULL;
                ptr = hammer_bread(hmp, buf_offset, &error, &buffer);
                if (error == 0) {
                        bp = bio->bio_buf;
                        bp->b_flags |= B_AGE;
                        hammer_io_modify(&buffer->io, 1);
                        bcopy(bp->b_data, ptr, leaf->data_len);
                        hammer_io_modify_done(&buffer->io);
                        hammer_rel_buffer(buffer, 0);
                        bp->b_resid = 0;
                        hammer_ip_replace_bulk(hmp, record);
                        biodone(bio);
                }
        }
        if (error) {
                /*
                 * Major suckage occured.  Also note:  The record was
                 * never added to the tree so we do not have to worry
                 * about the backend.
                 */
                hdkprintf("failed @ %016llx\n", (long long)leaf->data_offset);
                bp = bio->bio_buf;
                bp->b_resid = 0;
                bp->b_error = EIO;
                bp->b_flags |= B_ERROR;
                biodone(bio);
                record->flags |= HAMMER_RECF_DELETED_FE;
                hammer_rel_mem_record(record);
        }
        return(error);
}

/*
 * On completion of the BIO this callback must disconnect
 * it from the hammer_record and chain to the previous bio.
 *
 * An I/O error forces the mount to read-only.  Data buffers
 * are not B_LOCKED like meta-data buffers are, so we have to
 * throw the buffer away to prevent the kernel from retrying.
 *
 * NOTE: MPSAFE callback, only modify fields we have explicit
 *       access to (the bp and the record->gflags).
 */
static
void
hammer_io_direct_write_complete(struct bio *nbio)
{
        struct bio *obio;
        struct buf *bp;
        hammer_record_t record;
        hammer_mount_t hmp;

        record = nbio->bio_caller_info1.ptr;
        KKASSERT(record != NULL);
        hmp = record->ip->hmp;

        lwkt_gettoken(&hmp->io_token);

        bp = nbio->bio_buf;
        obio = pop_bio(nbio);
        if (bp->b_flags & B_ERROR) {
                lwkt_gettoken(&hmp->fs_token);
                hammer_critical_error(hmp, record->ip, bp->b_error,
                                      "while writing bulk data");
                lwkt_reltoken(&hmp->fs_token);
                bp->b_flags |= B_INVAL;
        }
        biodone(obio);

        KKASSERT(record->gflags & HAMMER_RECG_DIRECT_IO);
        if (record->gflags & HAMMER_RECG_DIRECT_WAIT) {
                record->gflags &= ~(HAMMER_RECG_DIRECT_IO |
                                    HAMMER_RECG_DIRECT_WAIT);
                /* record can disappear once DIRECT_IO flag is cleared */
                wakeup(&record->flags);
        } else {
                record->gflags &= ~HAMMER_RECG_DIRECT_IO;
                /* record can disappear once DIRECT_IO flag is cleared */
        }
        lwkt_reltoken(&hmp->io_token);
}


/*
 * This is called before a record is either committed to the B-Tree
 * or destroyed, to resolve any associated direct-IO.
 *
 * (1) We must wait for any direct-IO related to the record to complete.
 *
 * (2) We must remove any buffer cache aliases for data accessed via
 *     leaf->data_offset or zone2_offset so non-direct-IO consumers
 *     (the mirroring and reblocking code) do not see stale data.
 */
void
hammer_io_direct_wait(hammer_record_t record)
{
        hammer_mount_t hmp = record->ip->hmp;

        /*
         * Wait for I/O to complete
         */
        if (record->gflags & HAMMER_RECG_DIRECT_IO) {
                lwkt_gettoken(&hmp->io_token);
                while (record->gflags & HAMMER_RECG_DIRECT_IO) {
                        record->gflags |= HAMMER_RECG_DIRECT_WAIT;
                        tsleep(&record->flags, 0, "hmdiow", 0);
                }
                lwkt_reltoken(&hmp->io_token);
        }

        /*
         * Invalidate any related buffer cache aliases associated with the
         * backing device.  This is needed because the buffer cache buffer
         * for file data is associated with the file vnode, not the backing
         * device vnode.
         *
         * XXX I do not think this case can occur any more now that
         * reservations ensure that all such buffers are removed before
         * an area can be reused.
         */
        if (record->gflags & HAMMER_RECG_DIRECT_INVAL) {
                KKASSERT(record->leaf.data_offset);
                hammer_del_buffers(hmp, record->leaf.data_offset,
                                   record->zone2_offset, record->leaf.data_len,
                                   1);
                record->gflags &= ~HAMMER_RECG_DIRECT_INVAL;
        }
}

/*
 * This is called to remove the second-level cached zone-2 offset from
 * frontend buffer cache buffers, now stale due to a data relocation.
 * These offsets are generated by cluster_read() via VOP_BMAP, or directly
 * by hammer_vop_strategy_read().
 *
 * This is rather nasty because here we have something like the reblocker
 * scanning the raw B-Tree with no held references on anything, really,
 * other then a shared lock on the B-Tree node, and we have to access the
 * frontend's buffer cache to check for and clean out the association.
 * Specifically, if the reblocker is moving data on the disk, these cached
 * offsets will become invalid.
 *
 * Only data record types associated with the large-data zone are subject
 * to direct-io and need to be checked.
 *
 */
void
hammer_io_direct_uncache(hammer_mount_t hmp, hammer_btree_leaf_elm_t leaf)
{
        struct hammer_inode_info iinfo;
        int zone;

        if (leaf->base.rec_type != HAMMER_RECTYPE_DATA)
                return;
        zone = HAMMER_ZONE_DECODE(leaf->data_offset);
        if (zone != HAMMER_ZONE_LARGE_DATA_INDEX)
                return;
        iinfo.obj_id = leaf->base.obj_id;
        iinfo.obj_asof = 0;     /* unused */
        iinfo.obj_localization = leaf->base.localization &
                                 HAMMER_LOCALIZE_PSEUDOFS_MASK;
        iinfo.u.leaf = leaf;
        hammer_scan_inode_snapshots(hmp, &iinfo,
                                    hammer_io_direct_uncache_callback,
                                    leaf);
}

static int
hammer_io_direct_uncache_callback(hammer_inode_t ip, void *data)
{
        hammer_inode_info_t iinfo = data;
        hammer_off_t file_offset;
        struct vnode *vp;
        struct buf *bp;
        int blksize;

        if (ip->vp == NULL)
                return(0);
        file_offset = iinfo->u.leaf->base.key - iinfo->u.leaf->data_len;
        blksize = iinfo->u.leaf->data_len;
        KKASSERT((blksize & HAMMER_BUFMASK) == 0);

        /*
         * Warning: FINDBLK_TEST return stable storage but not stable
         *          contents.  It happens to be ok in this case.
         */
        hammer_ref(&ip->lock);
        if (hammer_get_vnode(ip, &vp) == 0) {
                if ((bp = findblk(ip->vp, file_offset, FINDBLK_TEST)) != NULL &&
                    bp->b_bio2.bio_offset != NOOFFSET) {
                        bp = getblk(ip->vp, file_offset, blksize, 0, 0);
                        bp->b_bio2.bio_offset = NOOFFSET;
                        brelse(bp);
                }
                vput(vp);
        }
        hammer_rel_inode(ip, 0);
        return(0);
}


/*
 * This function is called when writes may have occured on the volume,
 * indicating that the device may be holding cached writes.
 */
static __inline void
hammer_io_flush_mark(hammer_volume_t volume)
{
        atomic_set_int(&volume->vol_flags, HAMMER_VOLF_NEEDFLUSH);
}

/*
 * This function ensures that the device has flushed any cached writes out.
 */
void
hammer_io_flush_sync(hammer_mount_t hmp)
{
        hammer_volume_t volume;
        struct buf *bp_base = NULL;
        struct buf *bp;

        RB_FOREACH(volume, hammer_vol_rb_tree, &hmp->rb_vols_root) {
                if (volume->vol_flags & HAMMER_VOLF_NEEDFLUSH) {
                        atomic_clear_int(&volume->vol_flags,
                                         HAMMER_VOLF_NEEDFLUSH);
                        bp = getpbuf(NULL);
                        bp->b_bio1.bio_offset = 0;
                        bp->b_bufsize = 0;
                        bp->b_bcount = 0;
                        bp->b_cmd = BUF_CMD_FLUSH;
                        bp->b_bio1.bio_caller_info1.cluster_head = bp_base;
                        bp->b_bio1.bio_done = biodone_sync;
                        bp->b_bio1.bio_flags |= BIO_SYNC;
                        bp_base = bp;
                        vn_strategy(volume->devvp, &bp->b_bio1);
                }
        }
        while ((bp = bp_base) != NULL) {
                bp_base = bp->b_bio1.bio_caller_info1.cluster_head;
                biowait(&bp->b_bio1, "hmrFLS");
                relpbuf(bp, NULL);
        }
}

/*
 * Limit the amount of backlog which we allow to build up
 */
void
hammer_io_limit_backlog(hammer_mount_t hmp)
{
        waitrunningbufspace();
}